summaryrefslogtreecommitdiff
path: root/drivers/uio
AgeCommit message (Collapse)Author
2019-09-18Merge tag 'char-misc-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver pull request for 5.4-rc1. As has been happening in previous releases, more and more individual driver subsystem trees are ending up in here. Now if that is good or bad I can't tell, but hopefully it makes your life easier as it's more of an aggregation of trees together to one merge point for you. Anyway, lots of stuff in here: - habanalabs driver updates - thunderbolt driver updates - misc driver updates - coresight and intel_th hwtracing driver updates - fpga driver updates - extcon driver updates - some dma driver updates - char driver updates - android binder driver updates - nvmem driver updates - phy driver updates - parport driver fixes - pcmcia driver fix - uio driver updates - w1 driver updates - configfs fixes - other assorted driver updates All of these have been in linux-next for a long time with no reported issues" * tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits) misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation habanalabs: correctly cast variable to __le32 habanalabs: show correct id in error print habanalabs: stop using the acronym KMD habanalabs: display card name as sensors header habanalabs: add uapi to retrieve aggregate H/W events habanalabs: add uapi to retrieve device utilization habanalabs: Make the Coresight timestamp perpetual habanalabs: explicitly set the queue-id enumerated numbers habanalabs: print to kernel log when reset is finished habanalabs: replace __le32_to_cpu with le32_to_cpu habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64 habanalabs: Handle HW_IP_INFO if device disabled or in reset habanalabs: Expose devices after initialization is done habanalabs: improve security in Debug IOCTL habanalabs: use default structure for user input in Debug IOCTL habanalabs: Add descriptive name to PSOC app status register habanalabs: Add descriptive names to PSOC scratch-pad registers habanalabs: create two char devices per ASIC habanalabs: change device_setup_cdev() to be more generic ...
2019-09-04uio: uio_pdrv_genirq: Make UIO name controllable via DT node propertyDaniel Mack
When probed via DT, the uio_pdrv_genirq driver currently uses the name of the node and exposes that as name of the UIO device to userspace. This doesn't work for systems where multiple nodes with the same name (but different unit addresses) are present, or for systems where the node names are auto-generated by a third-party tool. This patch adds the possibility to read the UIO name from the optional "linux,uio-name" property. Signed-off-by: Daniel Mack <daniel@zonque.org> Link: https://lore.kernel.org/r/20190815212807.25058-1-daniel@zonque.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-02uio: uio_fsl_elbc_gpcm: convert platform driver to use dev_groupsGreg Kroah-Hartman
Platform drivers now have the option to have the platform core create and remove any needed sysfs attribute files. So take advantage of that and do not register "by hand" a sysfs group of attributes. Link: https://lore.kernel.org/r/20190731124349.4474-3-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-30uio: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-46-swboyd@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 136 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28uio: uio_fsl_elbc_gpcm: Make dev_attr_reg_br and dev_attr_reg_or staticYueHaibing
Fix sparse warnings: drivers/uio/uio_fsl_elbc_gpcm.c:71:1: warning: symbol 'dev_attr_reg_br' was not declared. Should it be static? drivers/uio/uio_fsl_elbc_gpcm.c:72:1: warning: symbol 'dev_attr_reg_or' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org? Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31driver: uio: fix possible use-after-free in __uio_register_deviceLiu Jian
In uio_dev_add_attributes() error handing case, idev is used after device_unregister(), in which 'idev' has been released, touch idev cause use-after-free. Fixes: a93e7b331568 ("uio: Prevent device destruction while fds are open") Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31driver: uio: fix possible memory leak in __uio_register_deviceLiu Jian
'idev' is malloced in __uio_register_device() and leak free it before leaving from the uio_get_minor() error handing case, it will cause memory leak. Fixes: a93e7b331568 ("uio: Prevent device destruction while fds are open") Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31uio/uio_pci_generic: Disable bus-mastering on releaseVenkatesh Srinivas
Userspace code using uio_pci_generic may enable bus-mastering by directly manipulating a PCI device's command register. If a userspace program enables bus-mastering but exits/crashes uncleanly, bus- mastering will still be enabled and stale DMA addresses may be programmed and live in the device. Disable bus-mastering unconditionally on last close of a UIO PCI fd to avoid this. If the device did not have bus-mastering enabled, pci_clear_master() is a no-op. Signed-off-by: Venkatesh Srinivas <venkateshs@google.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Catherine Sullivan <csully@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22uio: remove redundant checkChengguang Xu
It is not necessary to check idev->info several times under mutex lock, so just remove redundant check. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22uio: fix potential memory leak in error caseChengguang Xu
Should jump to lable err_infoopen when idev->info is NULL in uio_open(). Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-28Merge tag 'char-misc-4.21-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char and misc driver patches for 4.21-rc1. Lots of different types of driver things in here, as this tree seems to be the "collection of various driver subsystems not big enough to have their own git tree" lately. Anyway, some highlights of the changes in here: - binderfs: is it a rule that all driver subsystems will eventually grow to have their own filesystem? Binder now has one to handle the use of it in containerized systems. This was discussed at the Plumbers conference a few months ago and knocked into mergable shape very fast by Christian Brauner. Who also has signed up to be another binder maintainer, showing a distinct lack of good judgement :) - binder updates and fixes - mei driver updates - fpga driver updates and additions - thunderbolt driver updates - soundwire driver updates - extcon driver updates - nvmem driver updates - hyper-v driver updates - coresight driver updates - pvpanic driver additions and reworking for more device support - lp driver updates. Yes really, it's _finally_ moved to the proper parallal port driver model, something I never thought I would see happen. Good stuff. - other tiny driver updates and fixes. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (116 commits) MAINTAINERS: add another Android binder maintainer intel_th: msu: Fix an off-by-one in attribute store stm class: Add a reference to the SyS-T document stm class: Fix a module refcount leak in policy creation error path char: lp: use new parport device model char: lp: properly count the lp devices char: lp: use first unused lp number while registering char: lp: detach the device when parallel port is removed char: lp: introduce list to save port number bus: qcom: remove duplicated include from qcom-ebi2.c VMCI: Use memdup_user() rather than duplicating its implementation char/rtc: Use of_node_name_eq for node name comparisons misc: mic: fix a DMA pool free failure ptp: fix an IS_ERR() vs NULL check genwqe: Fix size check binder: implement binderfs binder: fix use-after-free due to ksys_close() during fdget() bus: fsl-mc: remove duplicated include files bus: fsl-mc: explicitly define the fsl_mc_command endianness misc: ti-st: make array read_ver_cmd static, shrinks object size ...
2018-12-11uio_hv_generic: set callbacks on openStephen Hemminger
This fixes the problem where uio application was unable to use multple queues on restart. The root cause is that the callbacks are cleared on disconnect. Change to setting up callbacks everytime in open. Fixes: cdfa835c6e5e ("uio_hv_generic: defer opening vmbus until first use") Reported-by: Mohammed Gamal <mgamal@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27uio: dismiss waiters on device unregistrationZhaolong Zhang
When the device is unregistered, it should wake up the blocking waiters. Otherwise, they will sleep forever. Signed-off-by: Zhaolong Zhang <zhangzl2013@126.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-26Merge 4.20-rc4 into char-misc-nextGreg Kroah-Hartman
We want the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-11uio: uio_fsl_elbc_gpcm: simplify getting .driver_dataWolfram Sang
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-11uio: Fix an Oops on loadDan Carpenter
I was trying to solve a double free but I introduced a more serious NULL dereference bug. The problem is that if there is an IRQ which triggers immediately, then we need "info->uio_dev" but it's not set yet. This patch puts the original initialization back to how it was and just sets info->uio_dev to NULL on the error path so it should solve both the Oops and the double free. Fixes: f019f07ecf6a ("uio: potential double frees if __uio_register_device() fails") Reported-by: Mathias Thore <Mathias.Thore@infinera.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Tested-by: Mathias Thore <Mathias.Thore@infinera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02uio: Convert a few more users to using %pOFn instead of device_node.nameRob Herring
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02uio: make symbol 'uio_class_registered' staticWei Yongjun
Fixes the following sparse warning: drivers/uio/uio.c:277:6: warning: symbol 'uio_class_registered' was not declared. Should it be static? Fixes: ae61cf5b9913 ("uio: ensure class is registered before devices") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25uio_hv_generic: defer opening vmbus until first useStephen Hemminger
This fixes two design flaws in hv_uio_generic. Since hv_uio_probe is called from vmbus_probe with lock held it potentially can cause sleep in an atomic section because vmbus_open will wait for response from host. The hv_uio_generic driver could not handle applications exiting and restarting because the vmbus channel was persistent. Change the semantics so that the buffers are allocated on probe, but not attached to host until device is opened. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25hv_uio_generic: map ringbuffer phys addrStephen Hemminger
The ring buffer is contiguous IOVA and is mapped via phys addr for sysfs file. Use same method for the UIO mapping. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25uio: introduce UIO_MEM_IOVAStephen Hemminger
Introduce the concept of mapping physical memory locations that are normal memory. The new type UIO_MEM_IOVA are similar to existing UIO_MEM_PHYS but the backing memory is not marked as uncached. Also, indent related switch to the currently used style. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25vmbus: keep pointer to ring buffer pageStephen Hemminger
Avoid going from struct page to virt address (and back) by just keeping pointer to the allocated pages instead of virt address. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-12uio: convert to vm_fault_tSouptick Joarder
As part of commit 9b85e95a3080 ("uio: Change return type to vm_fault_t") in 4.19-rc1, this conversion was missed. Now converted 'ret' to vm_fault_t type. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-12uio: Convert to using %pOFn instead of device_node.nameRob Herring
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-12uio: ensure class is registered before devicesAlexandre Belloni
When both uio and the uio drivers are built in the kernel, it is possible for a driver to register devices before the uio class is registered. This may result in a NULL pointer dereference later on in get_device_parent() when accessing the class glue_dirs spinlock. The trace looks like that: Unable to handle kernel NULL pointer dereference at virtual address 00000140 [...] [<ffff0000089cc234>] _raw_spin_lock+0x14/0x48 [<ffff0000084f56bc>] device_add+0x154/0x6a0 [<ffff0000084f5e48>] device_create_groups_vargs+0x120/0x128 [<ffff0000084f5edc>] device_create+0x54/0x60 [<ffff0000086e72c0>] __uio_register_device+0x120/0x4a8 [<ffff000008528b7c>] jaguar2_pci_probe+0x2d4/0x558 [<ffff0000083fc18c>] local_pci_probe+0x3c/0xb8 [<ffff0000083fd81c>] pci_device_probe+0x11c/0x180 [<ffff0000084f88bc>] driver_probe_device+0x22c/0x2d8 [<ffff0000084f8a24>] __driver_attach+0xbc/0xc0 [<ffff0000084f69fc>] bus_for_each_dev+0x4c/0x98 [<ffff0000084f81b8>] driver_attach+0x20/0x28 [<ffff0000084f7d08>] bus_add_driver+0x1b8/0x228 [<ffff0000084f93c0>] driver_register+0x60/0xf8 [<ffff0000083fb918>] __pci_register_driver+0x40/0x48 Return EPROBE_DEFER in that case so the driver can register the device later. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-12uio_hv_generic: drop #ifdef DEBUGStephen Hemminger
DEBUG is leftover from the development phase, remove it. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-12uio_hv_generic: increase size of receive and send buffersStephen Hemminger
When using DPDK there is significant performance boost by using the largest possible send and receive buffer area. Unfortunately, with UIO model there is not a good way to configure this at run time. But it is okay to have a bigger buffer available even if application only decides to use a smaller piece of it. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-19Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull UIO fix from Greg KH: "Here is a single UIO fix that I forgot to send before 4.18-final came out. It reverts a UIO patch that went in the 4.18 development window that was causing problems. This patch has been in linux-next for a while with no problems, I just forgot to send it earlier, or as part of the larger char/misc patch series from yesterday, my fault" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Revert "uio: use request_threaded_irq instead"
2018-08-12Revert "uio: use request_threaded_irq instead"Xiubo Li
Since mutex lock in irq hanler is useless currently, here will remove it together with it. This reverts commit 9421e45f5ff3d558cf8b75a8cc0824530caf3453. Reported-by: james.r.harris@intel.com CC: Ahsan Atta <ahsan.atta@intel.com> Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02uio: potential double frees if __uio_register_device() failsDan Carpenter
The uio_unregister_device() function assumes that if "info->uio_dev" is non-NULL that means "info" is fully allocated. Setting info->uio_de has to be the last thing in the function. In the current code, if request_threaded_irq() fails then we return with info->uio_dev set to non-NULL but info is not fully allocated and it can lead to double frees. Fixes: beafc54c4e2f ("UIO: Add the User IO core code") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02uio: fix possible circular locking dependencyXiubo Li
The call trace: XXX/1910 is trying to acquire lock: (&mm->mmap_sem){++++++}, at: [<ffffffff97008c87>] might_fault+0x57/0xb0 but task is already holding lock: (&idev->info_lock){+.+...}, at: [<ffffffffc0638a06>] uio_write+0x46/0x130 [uio] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&idev->info_lock){+.+...}: [<ffffffff96f31fc9>] lock_acquire+0x99/0x1e0 [<ffffffff975edad3>] mutex_lock_nested+0x93/0x410 [<ffffffffc063873d>] uio_mmap+0x2d/0x170 [uio] [<ffffffff97016b58>] mmap_region+0x428/0x650 [<ffffffff97017138>] do_mmap+0x3b8/0x4e0 [<ffffffff96ffaba3>] vm_mmap_pgoff+0xd3/0x120 [<ffffffff97015261>] SyS_mmap_pgoff+0x1f1/0x270 [<ffffffff96e387c2>] SyS_mmap+0x22/0x30 [<ffffffff975ff315>] system_call_fastpath+0x1c/0x21 -> #0 (&mm->mmap_sem){++++++}: [<ffffffff96f30e9c>] __lock_acquire+0xdac/0x15f0 [<ffffffff96f31fc9>] lock_acquire+0x99/0x1e0 [<ffffffff97008cb4>] might_fault+0x84/0xb0 [<ffffffffc0638a74>] uio_write+0xb4/0x130 [uio] [<ffffffff9706ffa3>] vfs_write+0xc3/0x1f0 [<ffffffff97070e2a>] SyS_write+0x8a/0x100 [<ffffffff975ff315>] system_call_fastpath+0x1c/0x21 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&idev->info_lock); lock(&mm->mmap_sem); lock(&idev->info_lock); lock(&mm->mmap_sem); *** DEADLOCK *** 1 lock held by XXX/1910: #0: (&idev->info_lock){+.+...}, at: [<ffffffffc0638a06>] uio_write+0x46/0x130 [uio] stack backtrace: CPU: 0 PID: 1910 Comm: XXX Kdump: loaded Not tainted #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 Call Trace: [<ffffffff975e9211>] dump_stack+0x19/0x1b [<ffffffff975e260a>] print_circular_bug+0x1f9/0x207 [<ffffffff96f2f6a7>] check_prevs_add+0x957/0x960 [<ffffffff96f30e9c>] __lock_acquire+0xdac/0x15f0 [<ffffffff96f2fb19>] ? mark_held_locks+0xb9/0x140 [<ffffffff96f31fc9>] lock_acquire+0x99/0x1e0 [<ffffffff97008c87>] ? might_fault+0x57/0xb0 [<ffffffff97008cb4>] might_fault+0x84/0xb0 [<ffffffff97008c87>] ? might_fault+0x57/0xb0 [<ffffffffc0638a74>] uio_write+0xb4/0x130 [uio] [<ffffffff9706ffa3>] vfs_write+0xc3/0x1f0 [<ffffffff9709349c>] ? fget_light+0xfc/0x510 [<ffffffff97070e2a>] SyS_write+0x8a/0x100 [<ffffffff975ff315>] system_call_fastpath+0x1c/0x21 Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02uio: pruss: fix error handling in probeDan Carpenter
There are two bugs here. First the error codes weren't set on several paths. And second, if the call to request_threaded_irq() inside uio_register_device() fails then it would lead to a double free when we call uio_unregister_device() inside pruss_cleanup(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21uio: add SPDX license tagsStephen Hemminger
For those without any license text present or short reference to GPL, add SPDX tag. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21uio: fix wrong return value from uio_mmap()Hailong Liu
uio_mmap has multiple fail paths to set return value to nonzero then goto out. However, it always returns *0* from the *out* at end, and this will mislead callers who check the return value of this function. Fixes: 57c5f4df0a5a0ee ("uio: fix crash after the device is unregistered") CC: Xiubo Li <xiubli@redhat.com> Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21uio: add SPDX license tagStephen Hemminger
Replace short statement in comment with proper SPDX license tag. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07uio: fix crash after the device is unregisteredXiubo Li
For the target_core_user use case, after the device is unregistered it maybe still opened in user space, then the kernel will crash, like: [ 251.163692] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 251.163820] IP: [<ffffffffc0736213>] show_name+0x23/0x40 [uio] [ 251.163965] PGD 8000000062694067 PUD 62696067 PMD 0 [ 251.164097] Oops: 0000 [#1] SMP ... [ 251.165605] e1000 mptscsih mptbase drm_panel_orientation_quirks dm_mirror dm_region_hash dm_log dm_mod [ 251.166014] CPU: 0 PID: 13380 Comm: tcmu-runner Kdump: loaded Not tainted 3.10.0-916.el7.test.x86_64 #1 [ 251.166381] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 [ 251.166747] task: ffff971eb91db0c0 ti: ffff971e9e384000 task.ti: ffff971e9e384000 [ 251.167137] RIP: 0010:[<ffffffffc0736213>] [<ffffffffc0736213>] show_name+0x23/0x40 [uio] [ 251.167563] RSP: 0018:ffff971e9e387dc8 EFLAGS: 00010282 [ 251.167978] RAX: 0000000000000000 RBX: ffff971e9e3f8000 RCX: ffff971eb8368d98 [ 251.168408] RDX: ffff971e9e3f8000 RSI: ffffffffc0738084 RDI: ffff971e9e3f8000 [ 251.168856] RBP: ffff971e9e387dd0 R08: ffff971eb8bc0018 R09: 0000000000000000 [ 251.169296] R10: 0000000000001000 R11: ffffffffa09d444d R12: ffffffffa1076e80 [ 251.169750] R13: ffff971e9e387f18 R14: 0000000000000001 R15: ffff971e9cfb1c80 [ 251.170213] FS: 00007ff37d175880(0000) GS:ffff971ebb600000(0000) knlGS:0000000000000000 [ 251.170693] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 251.171248] CR2: 0000000000000008 CR3: 00000000001f6000 CR4: 00000000003607f0 [ 251.172071] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 251.172640] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 251.173236] Call Trace: [ 251.173789] [<ffffffffa0c9b2d3>] dev_attr_show+0x23/0x60 [ 251.174356] [<ffffffffa0f561b2>] ? mutex_lock+0x12/0x2f [ 251.174892] [<ffffffffa0ac6d9f>] sysfs_kf_seq_show+0xcf/0x1f0 [ 251.175433] [<ffffffffa0ac54e6>] kernfs_seq_show+0x26/0x30 [ 251.175981] [<ffffffffa0a63be0>] seq_read+0x110/0x3f0 [ 251.176609] [<ffffffffa0ac5d45>] kernfs_fop_read+0xf5/0x160 [ 251.177158] [<ffffffffa0a3d3af>] vfs_read+0x9f/0x170 [ 251.177707] [<ffffffffa0a3e27f>] SyS_read+0x7f/0xf0 [ 251.178268] [<ffffffffa0f648af>] system_call_fastpath+0x1c/0x21 [ 251.178823] Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 53 48 89 d3 e8 7e 96 56 e0 48 8b 80 d8 02 00 00 48 89 df 48 c7 c6 84 80 73 c0 <48> 8b 50 08 31 c0 e8 e2 67 44 e0 5b 48 98 5d c3 0f 1f 00 66 2e [ 251.180115] RIP [<ffffffffc0736213>] show_name+0x23/0x40 [uio] [ 251.180820] RSP <ffff971e9e387dc8> [ 251.181473] CR2: 0000000000000008 CC: Hamish Martin <hamish.martin@alliedtelesis.co.nz> CC: Mike Christie <mchristi@redhat.com> Reviewed-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07uio: change to use the mutex lock instead of the spin lockXiubo Li
We are hitting a regression with the following commit: commit a93e7b331568227500186a465fee3c2cb5dffd1f Author: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Date: Mon May 14 13:32:23 2018 +1200 uio: Prevent device destruction while fds are open The problem is the addition of spin_lock_irqsave in uio_write. This leads to hitting uio_write -> copy_from_user -> _copy_from_user -> might_fault and the logs filling up with sleeping warnings. I also noticed some uio drivers allocate memory, sleep, grab mutexes from callouts like open() and release and uio is now doing spin_lock_irqsave while calling them. Reported-by: Mike Christie <mchristi@redhat.com> CC: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Reviewed-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07uio: use request_threaded_irq insteadXiubo Li
Prepraing for changing to use mutex lock. Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-14uio: Prevent device destruction while fds are openHamish Martin
Prevent destruction of a uio_device while user space apps hold open file descriptors to that device. Further, access to the 'info' member of the struct uio_device is protected by spinlock. This is to ensure stale pointers to data not under control of the UIO subsystem are not dereferenced. Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14uio: Reduce return paths from uio_write()Hamish Martin
Drive all return paths for uio_write() through a single block at the end of the function. Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-30Merge 4.17-rc3 into char-misc-nextGreg Kroah-Hartman
We want the fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23uio: uio_fsl_elbc_gpcm: Remove owner assignment from platform_driverFabio Estevam
Structure platform_driver does not need to set the owner field, as this will be populated by the driver core. Generated by scripts/coccinelle/api/platform_no_drv_owner.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23uio: Change return type to vm_fault_tSouptick Joarder
Use new return type vm_fault_t for fault handler in struct vm_operations_struct. For now, this is just documenting that the function returns a VM_ FAULT value rather than an errno. Once all inst ances are converted, vm_fault_t will become a di stinct type. Reference - 1c8f422059ae ("mm: change return type to vm_fault_t") Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23uio_hv_generic: fix subchannel ring mmapStephen Hemminger
The fault method of handling subchannel ring, did not work correctly (it only worked for the first page). Since ring buffer is physically contiguous, using the vm helper function is simpler and handles more cases. Fixes: 37b96a4931db ("uio_hv_generic: support sub-channels") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23uio_hv_generic: use correct channel in isrStephen Hemminger
Need to mask the correct sub-channel in the callback from VMBUS isr. Otherwise, can get in to infinite interrupt storm. Fixes: 37b96a4931db ("uio_hv_generic: support sub-channels") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 08:47:01 +0000