summaryrefslogtreecommitdiff
path: root/drivers/uio
AgeCommit message (Collapse)Author
2018-10-02uio: Convert a few more users to using %pOFn instead of device_node.nameRob Herring
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02uio: make symbol 'uio_class_registered' staticWei Yongjun
Fixes the following sparse warning: drivers/uio/uio.c:277:6: warning: symbol 'uio_class_registered' was not declared. Should it be static? Fixes: ae61cf5b9913 ("uio: ensure class is registered before devices") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25uio_hv_generic: defer opening vmbus until first useStephen Hemminger
This fixes two design flaws in hv_uio_generic. Since hv_uio_probe is called from vmbus_probe with lock held it potentially can cause sleep in an atomic section because vmbus_open will wait for response from host. The hv_uio_generic driver could not handle applications exiting and restarting because the vmbus channel was persistent. Change the semantics so that the buffers are allocated on probe, but not attached to host until device is opened. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25hv_uio_generic: map ringbuffer phys addrStephen Hemminger
The ring buffer is contiguous IOVA and is mapped via phys addr for sysfs file. Use same method for the UIO mapping. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25uio: introduce UIO_MEM_IOVAStephen Hemminger
Introduce the concept of mapping physical memory locations that are normal memory. The new type UIO_MEM_IOVA are similar to existing UIO_MEM_PHYS but the backing memory is not marked as uncached. Also, indent related switch to the currently used style. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25vmbus: keep pointer to ring buffer pageStephen Hemminger
Avoid going from struct page to virt address (and back) by just keeping pointer to the allocated pages instead of virt address. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-12uio: convert to vm_fault_tSouptick Joarder
As part of commit 9b85e95a3080 ("uio: Change return type to vm_fault_t") in 4.19-rc1, this conversion was missed. Now converted 'ret' to vm_fault_t type. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-12uio: Convert to using %pOFn instead of device_node.nameRob Herring
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-12uio: ensure class is registered before devicesAlexandre Belloni
When both uio and the uio drivers are built in the kernel, it is possible for a driver to register devices before the uio class is registered. This may result in a NULL pointer dereference later on in get_device_parent() when accessing the class glue_dirs spinlock. The trace looks like that: Unable to handle kernel NULL pointer dereference at virtual address 00000140 [...] [<ffff0000089cc234>] _raw_spin_lock+0x14/0x48 [<ffff0000084f56bc>] device_add+0x154/0x6a0 [<ffff0000084f5e48>] device_create_groups_vargs+0x120/0x128 [<ffff0000084f5edc>] device_create+0x54/0x60 [<ffff0000086e72c0>] __uio_register_device+0x120/0x4a8 [<ffff000008528b7c>] jaguar2_pci_probe+0x2d4/0x558 [<ffff0000083fc18c>] local_pci_probe+0x3c/0xb8 [<ffff0000083fd81c>] pci_device_probe+0x11c/0x180 [<ffff0000084f88bc>] driver_probe_device+0x22c/0x2d8 [<ffff0000084f8a24>] __driver_attach+0xbc/0xc0 [<ffff0000084f69fc>] bus_for_each_dev+0x4c/0x98 [<ffff0000084f81b8>] driver_attach+0x20/0x28 [<ffff0000084f7d08>] bus_add_driver+0x1b8/0x228 [<ffff0000084f93c0>] driver_register+0x60/0xf8 [<ffff0000083fb918>] __pci_register_driver+0x40/0x48 Return EPROBE_DEFER in that case so the driver can register the device later. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-12uio_hv_generic: drop #ifdef DEBUGStephen Hemminger
DEBUG is leftover from the development phase, remove it. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-12uio_hv_generic: increase size of receive and send buffersStephen Hemminger
When using DPDK there is significant performance boost by using the largest possible send and receive buffer area. Unfortunately, with UIO model there is not a good way to configure this at run time. But it is okay to have a bigger buffer available even if application only decides to use a smaller piece of it. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-19Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull UIO fix from Greg KH: "Here is a single UIO fix that I forgot to send before 4.18-final came out. It reverts a UIO patch that went in the 4.18 development window that was causing problems. This patch has been in linux-next for a while with no problems, I just forgot to send it earlier, or as part of the larger char/misc patch series from yesterday, my fault" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Revert "uio: use request_threaded_irq instead"
2018-08-12Revert "uio: use request_threaded_irq instead"Xiubo Li
Since mutex lock in irq hanler is useless currently, here will remove it together with it. This reverts commit 9421e45f5ff3d558cf8b75a8cc0824530caf3453. Reported-by: james.r.harris@intel.com CC: Ahsan Atta <ahsan.atta@intel.com> Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02uio: potential double frees if __uio_register_device() failsDan Carpenter
The uio_unregister_device() function assumes that if "info->uio_dev" is non-NULL that means "info" is fully allocated. Setting info->uio_de has to be the last thing in the function. In the current code, if request_threaded_irq() fails then we return with info->uio_dev set to non-NULL but info is not fully allocated and it can lead to double frees. Fixes: beafc54c4e2f ("UIO: Add the User IO core code") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02uio: fix possible circular locking dependencyXiubo Li
The call trace: XXX/1910 is trying to acquire lock: (&mm->mmap_sem){++++++}, at: [<ffffffff97008c87>] might_fault+0x57/0xb0 but task is already holding lock: (&idev->info_lock){+.+...}, at: [<ffffffffc0638a06>] uio_write+0x46/0x130 [uio] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&idev->info_lock){+.+...}: [<ffffffff96f31fc9>] lock_acquire+0x99/0x1e0 [<ffffffff975edad3>] mutex_lock_nested+0x93/0x410 [<ffffffffc063873d>] uio_mmap+0x2d/0x170 [uio] [<ffffffff97016b58>] mmap_region+0x428/0x650 [<ffffffff97017138>] do_mmap+0x3b8/0x4e0 [<ffffffff96ffaba3>] vm_mmap_pgoff+0xd3/0x120 [<ffffffff97015261>] SyS_mmap_pgoff+0x1f1/0x270 [<ffffffff96e387c2>] SyS_mmap+0x22/0x30 [<ffffffff975ff315>] system_call_fastpath+0x1c/0x21 -> #0 (&mm->mmap_sem){++++++}: [<ffffffff96f30e9c>] __lock_acquire+0xdac/0x15f0 [<ffffffff96f31fc9>] lock_acquire+0x99/0x1e0 [<ffffffff97008cb4>] might_fault+0x84/0xb0 [<ffffffffc0638a74>] uio_write+0xb4/0x130 [uio] [<ffffffff9706ffa3>] vfs_write+0xc3/0x1f0 [<ffffffff97070e2a>] SyS_write+0x8a/0x100 [<ffffffff975ff315>] system_call_fastpath+0x1c/0x21 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&idev->info_lock); lock(&mm->mmap_sem); lock(&idev->info_lock); lock(&mm->mmap_sem); *** DEADLOCK *** 1 lock held by XXX/1910: #0: (&idev->info_lock){+.+...}, at: [<ffffffffc0638a06>] uio_write+0x46/0x130 [uio] stack backtrace: CPU: 0 PID: 1910 Comm: XXX Kdump: loaded Not tainted #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 Call Trace: [<ffffffff975e9211>] dump_stack+0x19/0x1b [<ffffffff975e260a>] print_circular_bug+0x1f9/0x207 [<ffffffff96f2f6a7>] check_prevs_add+0x957/0x960 [<ffffffff96f30e9c>] __lock_acquire+0xdac/0x15f0 [<ffffffff96f2fb19>] ? mark_held_locks+0xb9/0x140 [<ffffffff96f31fc9>] lock_acquire+0x99/0x1e0 [<ffffffff97008c87>] ? might_fault+0x57/0xb0 [<ffffffff97008cb4>] might_fault+0x84/0xb0 [<ffffffff97008c87>] ? might_fault+0x57/0xb0 [<ffffffffc0638a74>] uio_write+0xb4/0x130 [uio] [<ffffffff9706ffa3>] vfs_write+0xc3/0x1f0 [<ffffffff9709349c>] ? fget_light+0xfc/0x510 [<ffffffff97070e2a>] SyS_write+0x8a/0x100 [<ffffffff975ff315>] system_call_fastpath+0x1c/0x21 Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02uio: pruss: fix error handling in probeDan Carpenter
There are two bugs here. First the error codes weren't set on several paths. And second, if the call to request_threaded_irq() inside uio_register_device() fails then it would lead to a double free when we call uio_unregister_device() inside pruss_cleanup(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21uio: add SPDX license tagsStephen Hemminger
For those without any license text present or short reference to GPL, add SPDX tag. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21uio: fix wrong return value from uio_mmap()Hailong Liu
uio_mmap has multiple fail paths to set return value to nonzero then goto out. However, it always returns *0* from the *out* at end, and this will mislead callers who check the return value of this function. Fixes: 57c5f4df0a5a0ee ("uio: fix crash after the device is unregistered") CC: Xiubo Li <xiubli@redhat.com> Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21uio: add SPDX license tagStephen Hemminger
Replace short statement in comment with proper SPDX license tag. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07uio: fix crash after the device is unregisteredXiubo Li
For the target_core_user use case, after the device is unregistered it maybe still opened in user space, then the kernel will crash, like: [ 251.163692] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 251.163820] IP: [<ffffffffc0736213>] show_name+0x23/0x40 [uio] [ 251.163965] PGD 8000000062694067 PUD 62696067 PMD 0 [ 251.164097] Oops: 0000 [#1] SMP ... [ 251.165605] e1000 mptscsih mptbase drm_panel_orientation_quirks dm_mirror dm_region_hash dm_log dm_mod [ 251.166014] CPU: 0 PID: 13380 Comm: tcmu-runner Kdump: loaded Not tainted 3.10.0-916.el7.test.x86_64 #1 [ 251.166381] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 [ 251.166747] task: ffff971eb91db0c0 ti: ffff971e9e384000 task.ti: ffff971e9e384000 [ 251.167137] RIP: 0010:[<ffffffffc0736213>] [<ffffffffc0736213>] show_name+0x23/0x40 [uio] [ 251.167563] RSP: 0018:ffff971e9e387dc8 EFLAGS: 00010282 [ 251.167978] RAX: 0000000000000000 RBX: ffff971e9e3f8000 RCX: ffff971eb8368d98 [ 251.168408] RDX: ffff971e9e3f8000 RSI: ffffffffc0738084 RDI: ffff971e9e3f8000 [ 251.168856] RBP: ffff971e9e387dd0 R08: ffff971eb8bc0018 R09: 0000000000000000 [ 251.169296] R10: 0000000000001000 R11: ffffffffa09d444d R12: ffffffffa1076e80 [ 251.169750] R13: ffff971e9e387f18 R14: 0000000000000001 R15: ffff971e9cfb1c80 [ 251.170213] FS: 00007ff37d175880(0000) GS:ffff971ebb600000(0000) knlGS:0000000000000000 [ 251.170693] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 251.171248] CR2: 0000000000000008 CR3: 00000000001f6000 CR4: 00000000003607f0 [ 251.172071] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 251.172640] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 251.173236] Call Trace: [ 251.173789] [<ffffffffa0c9b2d3>] dev_attr_show+0x23/0x60 [ 251.174356] [<ffffffffa0f561b2>] ? mutex_lock+0x12/0x2f [ 251.174892] [<ffffffffa0ac6d9f>] sysfs_kf_seq_show+0xcf/0x1f0 [ 251.175433] [<ffffffffa0ac54e6>] kernfs_seq_show+0x26/0x30 [ 251.175981] [<ffffffffa0a63be0>] seq_read+0x110/0x3f0 [ 251.176609] [<ffffffffa0ac5d45>] kernfs_fop_read+0xf5/0x160 [ 251.177158] [<ffffffffa0a3d3af>] vfs_read+0x9f/0x170 [ 251.177707] [<ffffffffa0a3e27f>] SyS_read+0x7f/0xf0 [ 251.178268] [<ffffffffa0f648af>] system_call_fastpath+0x1c/0x21 [ 251.178823] Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 53 48 89 d3 e8 7e 96 56 e0 48 8b 80 d8 02 00 00 48 89 df 48 c7 c6 84 80 73 c0 <48> 8b 50 08 31 c0 e8 e2 67 44 e0 5b 48 98 5d c3 0f 1f 00 66 2e [ 251.180115] RIP [<ffffffffc0736213>] show_name+0x23/0x40 [uio] [ 251.180820] RSP <ffff971e9e387dc8> [ 251.181473] CR2: 0000000000000008 CC: Hamish Martin <hamish.martin@alliedtelesis.co.nz> CC: Mike Christie <mchristi@redhat.com> Reviewed-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07uio: change to use the mutex lock instead of the spin lockXiubo Li
We are hitting a regression with the following commit: commit a93e7b331568227500186a465fee3c2cb5dffd1f Author: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Date: Mon May 14 13:32:23 2018 +1200 uio: Prevent device destruction while fds are open The problem is the addition of spin_lock_irqsave in uio_write. This leads to hitting uio_write -> copy_from_user -> _copy_from_user -> might_fault and the logs filling up with sleeping warnings. I also noticed some uio drivers allocate memory, sleep, grab mutexes from callouts like open() and release and uio is now doing spin_lock_irqsave while calling them. Reported-by: Mike Christie <mchristi@redhat.com> CC: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Reviewed-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07uio: use request_threaded_irq insteadXiubo Li
Prepraing for changing to use mutex lock. Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-14uio: Prevent device destruction while fds are openHamish Martin
Prevent destruction of a uio_device while user space apps hold open file descriptors to that device. Further, access to the 'info' member of the struct uio_device is protected by spinlock. This is to ensure stale pointers to data not under control of the UIO subsystem are not dereferenced. Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14uio: Reduce return paths from uio_write()Hamish Martin
Drive all return paths for uio_write() through a single block at the end of the function. Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-30Merge 4.17-rc3 into char-misc-nextGreg Kroah-Hartman
We want the fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23uio: uio_fsl_elbc_gpcm: Remove owner assignment from platform_driverFabio Estevam
Structure platform_driver does not need to set the owner field, as this will be populated by the driver core. Generated by scripts/coccinelle/api/platform_no_drv_owner.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23uio: Change return type to vm_fault_tSouptick Joarder
Use new return type vm_fault_t for fault handler in struct vm_operations_struct. For now, this is just documenting that the function returns a VM_ FAULT value rather than an errno. Once all inst ances are converted, vm_fault_t will become a di stinct type. Reference - 1c8f422059ae ("mm: change return type to vm_fault_t") Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23uio_hv_generic: fix subchannel ring mmapStephen Hemminger
The fault method of handling subchannel ring, did not work correctly (it only worked for the first page). Since ring buffer is physically contiguous, using the vm helper function is simpler and handles more cases. Fixes: 37b96a4931db ("uio_hv_generic: support sub-channels") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23uio_hv_generic: use correct channel in isrStephen Hemminger
Need to mask the correct sub-channel in the callback from VMBUS isr. Otherwise, can get in to infinite interrupt storm. Fixes: 37b96a4931db ("uio_hv_generic: support sub-channels") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23uio_hv_generic: make ring buffer attribute for primary channelStephen Hemminger
The primary channel also needs a ring buffer attribute. This allows application to check if kernel supports uio sub channels, and also makes all channels use consistent API. Fixes: 37b96a4931db ("uio_hv_generic: support sub-channels") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23uio_hv_generic: set size of ring buffer attributeStephen Hemminger
The original code had ring size as a module parameter, but then it was made a fixed value. The code to set the size of the ring buffer binary file was lost in the transistion. The size is needed by user mode driver to know the size of the ring buffer. Fixes: 37b96a4931db ("uio_hv_generic: support sub-channels") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-06uio_hv_generic: support sub-channelsStephen Hemminger
Use sysfs to allow supporting sub-channels. The userspace application makes request to host to create sub-channels and the UIO kernel driver populates the sysfs per-channel directory with a binary attribute file that can be used to read/write ring. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01Merge tag 'char-misc-4.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big pull request for char/misc drivers for 4.16-rc1. There's a lot of stuff in here. Three new driver subsystems were added for various types of hardware busses: - siox - slimbus - soundwire as well as a new vboxguest subsystem for the VirtualBox hypervisor drivers. There's also big updates from the FPGA subsystem, lots of Android binder fixes, the usual handful of hyper-v updates, and lots of other smaller driver updates. All of these have been in linux-next for a long time, with no reported issues" * tag 'char-misc-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (155 commits) char: lp: use true or false for boolean values android: binder: use VM_ALLOC to get vm area android: binder: Use true and false for boolean values lkdtm: fix handle_irq_event symbol for INT_HW_IRQ_EN EISA: Delete error message for a failed memory allocation in eisa_probe() EISA: Whitespace cleanup misc: remove AVR32 dependencies virt: vbox: Add error mapping for VERR_INVALID_NAME and VERR_NO_MORE_FILES soundwire: Fix a signedness bug uio_hv_generic: fix new type mismatch warnings uio_hv_generic: fix type mismatch warnings auxdisplay: img-ascii-lcd: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE uio_hv_generic: add rescind support uio_hv_generic: check that host supports monitor page uio_hv_generic: create send and receive buffers uio: document uio_hv_generic regions doc: fix documentation about uio_hv_generic vmbus: add monitor_id and subchannel_id to sysfs per channel vmbus: fix ABI documentation uio_hv_generic: use ISR callback method ...
2018-01-13uio_hv_generic: fix new type mismatch warningsArnd Bergmann
In commit 72d146578950 ("uio_hv_generic: fix type mismatch warnings"), I addressed some warnings that show up with CONFIG_X86_PAE, now a new change has added more of the same: drivers/uio/uio_hv_generic.c: In function 'hv_uio_probe': drivers/uio/uio_hv_generic.c:205:5: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] drivers/uio/uio_hv_generic.c:225:5: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] The fix is the same as before, casting to uintptr_t as an intermediate. Fixes: e7d214642a19 ("uio_hv_generic: create send and receive buffers") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-10uio_hv_generic: fix type mismatch warningsArnd Bergmann
I moved the virt_to_phys() conversion into hv_uio_probe() as part of a warning fix. Stephen's cleanup to remove the private mmap() function seems reasonable, but part of it reverted the change that I did to hide the warnings, so they are back now: drivers/uio/uio_hv_generic.c: In function 'hv_uio_probe': drivers/uio/uio_hv_generic.c:123:5: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] drivers/uio/uio_hv_generic.c:130:5: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] drivers/uio/uio_hv_generic.c:136:5: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] The type mismatch is now the result of the uio_mmap() definition, and the best way I see from here is to shut them up with a uintptr_t cast. Fixes: 9c40546c012c ("uio_hv_generic: use standard mmap for resources") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-10uio_hv_generic: add rescind supportStephen Hemminger
When host rescinds the device, the UIO driver will clear the interrupt state and notify application. The read (or write) on the interrupt FD will then fail with -EIO. This is simpler than adding lots extra uevent stuff inside UIO. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-10uio_hv_generic: check that host supports monitor pageStephen Hemminger
In order for userspace application to signal host, it needs the host to support the monitor page property. Check for the flag and fail if this is not supported. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-10uio_hv_generic: create send and receive buffersStephen Hemminger
Map in receive and send buffers for networking in UIO device. These buffers are special and need to be setup by kernel API's; userspace can not do it. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09uio_hv_generic: use ISR callback methodStephen Hemminger
The UIO IRQ handler doesn't need to be called from a tasklet. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09uio_hv_generic: use standard mmap for resourcesStephen Hemminger
The generic UIO mmap should work for us. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09uio_hv_generic: fix configuration commentsStephen Hemminger
The suggested method for configuration does not work with current kernels. Paths and ids changed. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28the rest of drivers/*: annotate ->poll() instancesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-22Merge 4.12-rc2 into char-misc-nextGreg Kroah-Hartman
We want the fixes in here as well to handle merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18uio/uio_pci_generic: don't fail probe if pdev->irq == NULLJim Harris
Some userspace drivers and frameworks only poll and do not require interrupts to be available and enabled on the PCI device. So remove the requirement that an IRQ is assigned. If an IRQ is not assigned and a userspace driver tries to read()/write(), the generic uio framework will just return -EIO. This allows binding uio_pci_generic to devices which cannot get an IRQ assigned, such as an NVMe controller behind Intel Volume Management Device (VMD), since VMD does not support INTx interrupts. Signed-off-by: Jim Harris <james.r.harris@intel.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-16uio: fix incorrect memory leak cleanupSuman Anna
Commit 75f0aef6220d ("uio: fix memory leak") has fixed up some memory leaks during the failure paths of the addition of uio attributes, but still is not correct entirely. A kobject_uevent() failure still needs a kobject_put() and the kobject container structure allocation failure before the kobject_init() doesn't need a kobject_put(). Fix this properly. Fixes: 75f0aef6220d ("uio: fix memory leak") Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08uio_mf624: Align memory regions to page size and set correct offsetsMichal Sojka
mf624 card has its registers not aligned to pages. Since commit b65502879556 ("uio: we cannot mmap unaligned page contents") mmap()ing mf624 registers fails, because now the uio drivers must set uio_mem->addr to be page-aligned. We align the address here and set the newly introduced offs field to the offset of the mf264 registers within the page so that userspace can find the address of the mmap()ed register by reading /sys/class/uio/uio?/maps/map?/offset. Tested with real mf624 card. Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08uio_mf624: Refactor memory info initializationMichal Sojka
No functional changes. Move initialization of struct uio_mem to a function. This will allow the next commit to change the initialization code at a single place rather that at three different places. Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 19:34:37 +0000