| Age | Commit message (Collapse) | Author |
|---|
|
We need the virtbox changes in here as well to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
uio_pdrv_genirq and uio_dmem_genirq interrupts are handled in
userspace. So the condition for the interrupt hasn't normally not been
cleared when top half returns. disable_irq_nosync is called in top half,
but since that normally is lazy the irq isn't actually disabled.
For level triggered interrupts this will always result in a spurious
additional fire since the level in to the interrupt controller still is
active. The actual interrupt handler isn't run though since this
spurious irq is just recorded, and later on discared (for level).
This commit disables lazy masking for level triggered interrupts. It
leaves edge triggered interrupts as before, because they work with the
lazy scheme.
All other UIO drivers already seem to clear the interrupt cause at
driver levels.
Example of double fire. First goes all the way up to
uio_pdrv_genirq_handler, second is terminated in handle_fasteoi_irq and
marked as pending.
<idle>-0 [000] d... 8.245870: gic_handle_irq: irq 29
<idle>-0 [000] d.h. 8.245873: uio_pdrv_genirq_handler: disable irq 29
<idle>-0 [000] d... 8.245878: gic_handle_irq: irq 29
<idle>-0 [000] d.h. 8.245880: handle_fasteoi_irq: irq 29 PENDING
HInt-34 [001] d... 8.245897: uio_pdrv_genirq_irqcontrol: enable irq 29
Tested on 5.7rc2 using uio_pdrv_genirq and a custom Xilinx MPSoC board.
Signed-off-by: Thommy Jakobsson <thommyj@gmail.com>
Link: https://lore.kernel.org/r/20200628141229.16121-1-thommyj@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Similar to the changes made in 270579d95f82 ("uio_mf624: Align memory
regions to page size and set correct offsets"), this will allow
uio_pdrv_genirq devices to expose memory regions that is not page-aligned,
requiring the users to respect the offset sysfs attribute (as implemented
in libuio).
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/r/20200701145659.3978-4-esben@geanix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While e3a3c3a20555 ("UIO: fix uio_pdrv_genirq with device tree but no
interrupt") added support for using uio_pdrv_genirq for devices without
interrupt for device tree platforms, the removal of uio_pdrv in
26dac3c49d56 ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead")
broke the support for non device tree platforms.
This change fixes this, so that uio_pdrv_genirq can be used without
interrupt on all platforms.
This still leaves the support that uio_pdrv had for custom interrupt
handler lacking, as uio_pdrv_genirq does not handle it (yet).
Fixes: 26dac3c49d56 ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead")
Signed-off-by: Esben Haabendal <esben@geanix.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200701145659.3978-3-esben@geanix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since e3a3c3a20555 ("UIO: fix uio_pdrv_genirq with device tree but no
interrupt"), the uio_pdrv_genirq has supported use without interrupt,
so the change in 7723f4c5ecdb ("driver core: platform: Add an error
message to") added false warnings for those cases.
Fixes: 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Esben Haabendal <esben@geanix.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200701145659.3978-2-esben@geanix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This change makes use of the new devm_uio_register_device() initializer.
This cleans up the exit path quite nicely, and removes the remove function
of the driver.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200306161853.25368-2-alexandru.ardelean@analog.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When deferring the probe routine just return without displaying an
error.
Signed-off-by: Oscar Ravadilla <oscar.ravadilla@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20200108001648.2949-1-oscar.ravadilla@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When probed via DT, the uio_pdrv_genirq driver currently uses the name
of the node and exposes that as name of the UIO device to userspace.
This doesn't work for systems where multiple nodes with the same name
(but different unit addresses) are present, or for systems where the
node names are auto-generated by a third-party tool.
This patch adds the possibility to read the UIO name from the optional
"linux,uio-name" property.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20190815212807.25058-1-daniel@zonque.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A platform_driver does not need to set an owner, it will be populated by the
driver core.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Using devres functions simplify driver error path.
- Use devm_kzalloc
- Use devm_request_irq
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This eliminates having an #ifdef returning NULL for the case
when OF is disabled.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In a SMP case there was a race condition issue between
uio_pdrv_genirq_irqcontrol() running on one CPU and irq handler on
another CPU. Fix it by spin_locking shared resources access inside irq
handler. Also:
- Change disable_irq to disable_irq_nosync to avoid deadlock, because
disable_irq waits for the completion of the irq handler;
- Change atomic bit-manipulation routines to their non-atomic
counterparts as we already are guarding the code by spinlock.
Signed-off-by: Vitalii Demianets <vitas@nppfactor.kiev.ua>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If device is initialized from device tree, but has no interrupt
assigned, uio will still try to request and interrupt old way,
fails, and fails registration.
This is wrong; don't try initializing irq using platform data if
device tree is available.
Simplified code based on suggestion by Grant Likely.
Fixed memory leak in "irq can not be registered" error path.
Signed-off-by: Pavel Machek <pavel@denx.de>
Reported-by: Detlev Zundel <dzu@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This adds ability to bind uio driver to given open firmware device
using command line option. Thus, userspace driver can be developed and
used without modifying the kernel.
Signed-off-by: Pavel Machek <pavel@denx.de>
Tested-by: Detlev Zundel <dzu@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The same condition should be used both when allocating and freeing the
driver private data. When dev.of_node is non NULL, allocate a new
private data structure, otherwise use the values from the platform data.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp>
Cc: "Hans J. Koch" <hjk@hansjkoch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If uio_pdrv[_genirq] is used, the uio maps have currently no name set.
This patch sets the uio_mem name to the name of the memory resource.
Signed-off-by: Manuel Traut <manut@linutronix.de>
Reported-by: Stefan Staedtler <stefan.staedtler@siemens.com>
Tested-by: Stefan Staedtler <stefan.staedtler@siemens.com>
Signed-off-by: "Hans J. Koch" <hjk@hansjkoch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Platform devices are configured through platform resources. The interrupt
in the driver uio_pdrv_genirq is instead configured through a side channel
i.e. the platform data structure. Make it possible to use the generic
configuration scheme via platform resource.
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: "Hans J. Koch" <hjk@hansjkoch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch converts the drivers in drivers/uio/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.
Cc: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Cc: Magnus Damm <damm@igel.co.jp>
Cc: Amit Chatterjee <amit.chatterjee@ti.com>
Cc: Pratheesh Gangadhar <pratheesh@ti.com>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
We are cleaning up the omnipresent module.h stuff, so people
who really use it need to call it out explicitly.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
Remove the __devinitconst to fix the section mismatch.
WARNING: drivers/uio/built-in.o(.data+0x2e8): Section mismatch in
reference from the variable uio_pdrv_genirq to the variable
.devinit.rodata:uio_of_genirq_match
The variable uio_pdrv_genirq references
the variable __devinitconst uio_of_genirq_match
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the
variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one,
*_console
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
updated Documentation/ja_JP/SubmittingPatches
debugfs: add documentation for debugfs_create_x64
uio: uio_pdrv_genirq: Add OF support
firmware: gsmi: remove sysfs entries when unload the module
Documentation/zh_CN: Fix messy code file email-clients.txt
driver core: add more help description for "path to uevent helper"
driver-core: modify FIRMWARE_IN_KERNEL help message
driver-core: Kconfig grammar corrections in firmware configuration
DOCUMENTATION: Replace create_device() with device_create().
DOCUMENTATION: Update overview.txt in Doc/driver-model.
pti: pti_tty_install documentation mispelling.
|
|
Adding OF binding to genirq.
Version string is setup to the "devicetree".
Compatible string is not setup for now but you can add your
custom compatible string to uio_of_genirq_match structure.
For example with "vendor,device" compatible string:
static const struct of_device_id __devinitconst uio_of_genirq_match[] = {
{ .compatible = "vendor,device", },
{ /* empty for now */ },
};
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
CC: Hans J. Koch <hjk@hansjkoch.de>
CC: Arnd Bergmann <arnd@arndb.de>
CC: John Williams <john.williams@petalogix.com>
CC: Grant Likely <grant.likely@secretlab.ca>
CC: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Several fixes as well where the +1 was missing.
Done via coccinelle scripts like:
@@
struct resource *ptr;
@@
- ptr->end - ptr->start + 1
+ resource_size(ptr)
and some grep and typing.
Mostly uncompiled, no cross-compilers.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The uioinfo should be cleaned up when uninstall, otherwise re-install
failure of uio_pdrv_genirq.ko will happen.
Signed-off-by: Jie Zhou <b30303@freescale.com>
Signed-off-by: Aisheng Dong <b29396@freescale.com>
Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Remove IRQF_DISABLED flag since it is deprecated and a no-op in the
current kernel.
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
|
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
|
This patch modifies the uio_pdrv_genirq driver to support
Runtime PM. The power management implementation simply
runtime resumes the device at open() time and runtime
suspends it at release() time. The user space driver is
responsible for re-initializing the hardware after open().
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
|
I can't think of a reason why the driver prevents people from setting any
custom bits in their platform device, but I can think of some reasons for
allowing custom flags. Like setting the IRQF_TRIGGER_... bits.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This is V3 of uio_pdrv_genirq.c, a platform driver for UIO with
generic IRQ handling code. This driver is very similar to the regular
UIO platform driver, but is only suitable for devices that are
connected to the interrupt controller using unique interrupt lines.
The uio_pdrv_genirq driver includes generic interrupt handling code
which disables the serviced interrupt in the interrupt controller
and makes the user space driver responsible for acknowledging the
interrupt in the device and reenabling the interrupt in the interrupt
controller.
Shared interrupts are not supported since the in-kernel interrupt
handler will disable the interrupt line in the interrupt controller,
and in a shared interrupt configuration this will stop other devices
from delivering interrupts.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
