| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc/whatever driver subsystem updates
for 5.12-rc1. Over time it seems like this tree is collecting more and
more tiny driver subsystems in one place, making it easier for those
maintainers, which is why this is getting larger.
Included in here are:
- coresight driver updates
- habannalabs driver updates
- virtual acrn driver addition (proper acks from the x86 maintainers)
- broadcom misc driver addition
- speakup driver updates
- soundwire driver updates
- fpga driver updates
- amba driver updates
- mei driver updates
- vfio driver updates
- greybus driver updates
- nvmeem driver updates
- phy driver updates
- mhi driver updates
- interconnect driver udpates
- fsl-mc bus driver updates
- random driver fix
- some small misc driver updates (rtsx, pvpanic, etc.)
All of these have been in linux-next for a while, with the only
reported issue being a merge conflict due to the dfl_device_id
addition from the fpga subsystem in here"
* tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
spmi: spmi-pmic-arb: Fix hw_irq overflow
Documentation: coresight: Add PID tracing description
coresight: etm-perf: Support PID tracing for kernel at EL2
coresight: etm-perf: Clarify comment on perf options
ACRN: update MAINTAINERS: mailing list is subscribers-only
regmap: sdw-mbq: use MODULE_LICENSE("GPL")
regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ
regmap: sdw: use _no_pm functions in regmap_read/write
soundwire: intel: fix possible crash when no device is detected
MAINTAINERS: replace my with email with replacements
mhi: Fix double dma free
uapi: map_to_7segment: Update example in documentation
uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED
drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue
firewire: replace tricky statement by two simple ones
vme: make remove callback return void
firmware: google: make coreboot driver's remove callback return void
firmware: xilinx: Use explicit values for all enum values
sample/acrn: Introduce a sample of HSM ioctl interface usage
virt: acrn: Introduce an interface for Service VM to control vCPU
...
|
|
Pull ARM updates from Russell King:
- Generalise byte swapping assembly
- Update debug addresses for STI
- Validate start of physical memory with DTB
- Do not clear SCTLR.nTLSMD in decompressor
- amba/locomo/sa1111 devices remove method return type is void
- address markers for KASAN in page table dump
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled
ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void
amba: Make use of bus_type functions
amba: Make the remove callback return void
vfio: platform: simplify device removal
amba: reorder functions
amba: Fix resource leak for drivers without .remove
ARM: 9054/1: arch/arm/mm/mmu.c: Remove duplicate header
ARM: 9053/1: arm/mm/ptdump:Add address markers for KASAN regions
ARM: 9051/1: vdso: remove unneded extra-y addition
ARM: 9050/1: Kconfig: Select ARCH_HAVE_NMI_SAFE_CMPXCHG where possible
ARM: 9049/1: locomo: make locomo bus's remove callback return void
ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void
ARM: 9047/1: smp: remove unused variable
ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores
ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB
ARM: 9042/1: debug: no uncompress debugging while semihosting
ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support
ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART
ARM: 9039/1: assembler: generalize byte swapping macro into rev_l
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build host
fdtoverlay
- Add kbuild support to build DT overlays (%.dtbo)
- Drop NULLifying match table in of_match_device().
In preparation for this, there are several driver cleanups to use
(of_)?device_get_match_data().
- Drop pointless wrappers from DT struct device API
- Convert USB binding schemas to use graph schema and remove old plain
text graph binding doc
- Convert spi-nor and v3d GPU bindings to DT schema
- Tree wide schema fixes for if/then schemas, array size constraints,
and undocumented compatible strings in examples
- Handle 'no-map' correctly for already reserved memblock regions
* tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
driver core: platform: Drop of_device_node_put() wrapper
of: Remove of_dev_{get,put}()
dt-bindings: usb: Change descibe to describe in usbmisc-imx.txt
dt-bindings: can: rcar_canfd: Group tuples in pin control properties
dt-bindings: power: renesas,apmu: Group tuples in cpus properties
dt-bindings: mtd: spi-nor: Convert to DT schema format
dt-bindings: Use portable sort for version cmp
dt-bindings: ethernet-controller: fix fixed-link specification
dt-bindings: irqchip: Add node name to PRUSS INTC
dt-bindings: interconnect: Fix the expected number of cells
dt-bindings: Fix errors in 'if' schemas
dt-bindings: iommu: renesas,ipmmu-vmsa: Make 'power-domains' conditionally required
dt-bindings: Fix undocumented compatible strings in examples
kbuild: Add support to build overlays (%.dtbo)
scripts: dtc: Remove the unused fdtdump.c file
scripts: dtc: Build fdtoverlay tool
scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9
scripts: dtc: Fetch fdtoverlay.c from external DTC project
dt-bindings: thermal: sun8i: Fix misplaced schema keyword in compatible strings
dt-bindings: iio: dac: Fix AD5686 references
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty/serial driver changes for 5.12-rc1.
Nothing huge, just lots of good cleanups and additions:
- n_tty line discipline cleanups
- vt core cleanups and reworks to make the code more "modern"
- stm32 driver additions
- tty led support added to the tty core and led layer
- minor serial driver fixups and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (54 commits)
serial: core: Remove BUG_ON(in_interrupt()) check
vt_ioctl: Remove in_interrupt() check
dt-bindings: serial: imx: Switch to my personal address
vt: keyboard, use new API for keyboard_tasklet
serial: stm32: improve platform_get_irq condition handling in init_port
serial: ifx6x60: Remove driver for deprecated platform
tty: fix up iterate_tty_read() EOVERFLOW handling
tty: fix up hung_up_tty_read() conversion
tty: fix up hung_up_tty_write() conversion
tty: teach the n_tty ICANON case about the new "cookie continuations" too
tty: teach n_tty line discipline about the new "cookie continuations"
tty: clean up legacy leftovers from n_tty line discipline
tty: implement read_iter
tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer
serial: remove sirf prima/atlas driver
serial: mxs-auart: Remove <asm/cacheflush.h>
serial: mxs-auart: Remove serial_mxs_probe_dt()
serial: fsl_lpuart: Use of_device_get_match_data()
dt-bindings: serial: renesas,hscif: Add r8a779a0 support
tty: serial: Drop unused efm32 serial driver
...
|
|
Al root-caused a new warning from syzbot to the ttyprintk tty driver
returning a write count larger than the data the tty layer actually gave
it. Which confused the tty write code mightily, and with the new
iov_iter based code, caused a WARNING in iov_iter_revert().
syzbot correctly bisected the source of the new warning to commit
9bb48c82aced ("tty: implement write_iter"), but the oddity goes back
much further, it just didn't get caught by anything before.
Reported-by: syzbot+3d2c27c2b7dc2a94814d@syzkaller.appspotmail.com
Fixes: 9bb48c82aced ("tty: implement write_iter")
Debugged-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The usage of in_interrupt() in drivers is phased out for various
reasons.
In both exported functions where BUG_ON(in_interrupt()) is invoked,
there is a mutex_lock() afterwards. mutex_lock() contains a
might_sleep() which will already trigger a stack trace if the target
functions is called from atomic context.
Remove the BUG_ON() and add a "Context: " in the kernel-doc instead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20210208181615.381861-3-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
reset_vc() uses a "!in_interrupt()" conditional before resetting the
palettes, which is a blocking operation. Since commit
8b6312f4dcc1e ("[PATCH] vt: refactor console SAK processing")
all calls are invoked from a workqueue process context, with the
blocking console lock always acquired.
Remove the "!in_interrupt()" check.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20210208181615.381861-2-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
char-misc-next
This merges from linux-arm at 860660fd829e ("ARM: 9055/1: mailbox:
arm_mhuv2: make remove callback return void") into char-misc-next to get
the amba fixes from Uwe.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All amba drivers return 0 in their remove callback. Together with the
driver core ignoring the return value anyhow, it doesn't make sense to
return a value here.
Change the remove prototype to return void, which makes it explicit that
returning an error value doesn't work as expected. This simplifies changing
the core remove callback to return void, too.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # for drivers/memory
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> # for hwtracing/coresight
Acked-By: Vinod Koul <vkoul@kernel.org> # for dmaengine
Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Takashi Iwai <tiwai@suse.de> # for sound
Acked-by: Vladimir Zapolskiy <vz@mleia.com> # for memory/pl172
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210126165835.687514-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
It turns out that the vfs_iocb_iter_{read,write}() functions are
entirely broken, and don't actually use the passed-in file pointer for
IO - only for the preparatory work (permission checking and for the
write_iter function lookup).
That worked fine for overlayfs, which always builds the new iocb with
the same file pointer that it passes in, but in the general case it ends
up doing nonsensical things (and could cause an iterator call that
doesn't even match the passed-in file pointer).
This subtly broke the tty conversion to write_iter in commit
9bb48c82aced ("tty: implement write_iter"), because the console
redirection didn't actually end up redirecting anything, since the
passed-in file pointer was basically ignored, and the actual write was
done with the original non-redirected console tty after all.
The main visible effect of this is that the console messages were no
longer logged to /var/log/boot.log during graphical boot.
Fix the issue by simply not using the vfs write "helper" function at
all, and just redirecting the write entirely internally to the tty
layer. Do the target writability permission checks when actually
registering the target tty with TIOCCONS instead of at write time.
Fixes: 9bb48c82aced ("tty: implement write_iter")
Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This converts the keyboard_tasklet to use the new API in
commit 12cc923f1ccc ("tasklet: Introduce new initialization API")
The new API changes the argument passed to the callback function, but
fortunately the argument isn't used so it is straight forward to use
DECLARE_TASKLET_DISABLED() rather than DECLARE_TASKLET_DISABLED_OLD().
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20210127164222.13220-1-kernel@esmil.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc130 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210122114358.39299-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace "ret" variable by "irq" variable from platform_get_irq condition
handling in stm32_init_port as suggested by Jiri in "STM32 uart cleanup and
improvement" series review.
This change will prevent port->irq to be unexpectly modified by a potential
change of "ret" value introduced by a new patch.
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210121142309.6327-1-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc130 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210125150238.16980-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver casts away the constness of struct stm32_usart_info that is
pointed to by the of match table. Use of_device_get_match_data() instead
of of_match_device() here and push the const throughout the code so that
we don't cast away const. This nicely avoids referencing the match table
when it is undefined with configurations where CONFIG_OF=n and fixes the
const issues.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: <linux-serial@vger.kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210123034428.2841052-4-swboyd@chromium.org
|
|
layer to use write_iter. Fix the redirected_tty_write declaration
also in n_tty and change the comparisons to use write_iter instead of
write.
[ Also moved the declaration of redirected_tty_write() to the proper
location in a header file. The reason for the bug was the bogus extern
declaration in n_tty.c silently not matching the changed definition in
tty_io.c, and because it wasn't in a shared header file, there was no
cross-checking of the declaration.
Sami noticed because Clang's Control Flow Integrity checking ended up
incidentally noticing the inconsistent declaration. - Linus ]
Fixes: 9bb48c82aced ("tty: implement write_iter")
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We need the fixes in here and this resolves a merge issue in
drivers/tty/tty_io.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are three small tty/serial fixes for 5.11-rc5 to resolve reported
problems:
- two patches to fix up writing to ttys with splice
- mvebu-uart driver fix for reported problem
All of these have been in linux-next with no reported problems"
* tag 'tty-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: fix up hung_up_tty_write() conversion
tty: implement write_iter
serial: mvebu-uart: fix tx lost characters at power off
|
|
In commit "tty: implement write_iter", I left the write_iter conversion
of the hung up tty case alone, because I incorrectly thought it didn't
matter.
Jiri showed me the errors of my ways, and pointed out the problems with
that incomplete conversion. Fix it all up.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/CAHk-=wh+-rGsa=xruEWdg_fJViFG8rN9bpLrfLz=_yBYh2tBhA@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When I converted the tty_ldisc_ops 'read()' function to take a kernel
pointer, I was a bit too aggressive about the ldisc returning EOVERFLOW.
Yes, we want to have EOVERFLOW override any partially read data (because
the whole point is that the buffer was too small for the whole packet,
and we don't want to see partial packets), but it shouldn't override a
previous EFAULT.
And in fact, it really is just EOVERFLOW that is special and should
throw away any partially read data, not "any error". Admittedly
EOVERFLOW is currently the only one that can happen for a continuation
read - and if the first read iteration returns an error we won't have this issue.
So this is more of a technicality, but let's just make the intent very
explicit, and re-organize the error handling a bit so that this is all
clearer.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/CAHk-=wh+-rGsa=xruEWdg_fJViFG8rN9bpLrfLz=_yBYh2tBhA@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In commit "tty: implement read_iter", I left the read_iter conversion of
the hung up tty case alone, because I incorrectly thought it didn't
matter.
Jiri showed me the errors of my ways, and pointed out the problems with
that incomplete conversion. Fix it all up.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/CAHk-=wh+-rGsa=xruEWdg_fJViFG8rN9bpLrfLz=_yBYh2tBhA@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In commit "tty: implement write_iter", I left the write_iter conversion
of the hung up tty case alone, because I incorrectly thought it didn't
matter.
Jiri showed me the errors of my ways, and pointed out the problems with
that incomplete conversion. Fix it all up.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/CAHk-=wh+-rGsa=xruEWdg_fJViFG8rN9bpLrfLz=_yBYh2tBhA@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into tty-next
Fixes both the "splice/sendfile to a tty" and "splice/sendfile from a
tty" regression from 5.10.
* 'tty-splice' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux:
tty: teach the n_tty ICANON case about the new "cookie continuations" too
tty: teach n_tty line discipline about the new "cookie continuations"
tty: clean up legacy leftovers from n_tty line discipline
tty: implement read_iter
tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer
tty: implement write_iter
|
|
We want the single "splice/sendfile to a tty" regression fix into
tty-linus so it can get into 5.11-final, while the larger patch series
fixing "splice/sendfile from a tty" should wait for 5.12-rc1 so that we
get more testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ICANON case is a bit messy, since it has to look for the line
ending, and has special code to then suppress line ending characters if
they match the __DISABLED_CHAR. So it actually looks up the line ending
even past the point where it knows it won't copy it to the result
buffer.
That said, apart from all those odd legacy N_TTY ICANON cases, the
actual "should we continue copying" logic isn't really all that
complicated or different from the non-canon case. In fact, the lack of
"wait for at least N characters" arguably makes the repeat case slightly
simpler. It really just boils down to "there's more of the line to be
copied".
So add the necessarily trivial logic, and now the N_TTY case will give
long result lines even when in canon mode.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With the conversion to do the tty ldisc read operations in small chunks,
the n_tty line discipline became noticeably slower for throughput
oriented loads, because rather than read things in up to 2kB chunks, it
would return at most 64 bytes per read() system call.
The cost is mainly all in the "do system calls over and over", not
really in the new "copy to an extra kernel buffer".
This can be fixed by teaching the n_tty line discipline about the
"cookie continuation" model, which the chunking code supports because
things like hdlc need to be able to handle packets up to 64kB in size.
Doing that doesn't just get us back to the old performace, but to much
better performance: my stupid "copy 10MB of data over a pty" test
program is now almost twice as fast as it used to be (going down from
0.1s to 0.054s).
This is entirely because it now creates maximal chunks (which happens to
be "one byte less than one page" due to how we do the circular tty
buffers).
NOTE! This case only handles the simpler non-icanon case, which is the
one where people may care about throughput. I'm going to do the icanon
case later too, because while performance isn't a major issue for that,
there may be programs that think they'll always get a full line and
don't like the 64-byte chunking for that reason.
Such programs are arguably buggy (signals etc can cause random partial
results from tty reads anyway), and good programs will handle such
partial reads, but expecting everybody to write "good programs" has
never been a winning policy for the kernel..
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Back when the line disciplines did their own direct user accesses, they
had to deal with the data copy possibly failing in the middle.
Now that the user copy is done by the tty_io.c code, that failure case
no longer exists.
Remove the left-over error handling code that cannot trigger.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This makes the tty layer use the .write_iter() function instead of the
traditional .write() functionality.
That allows writev(), but more importantly also makes it possible to
enable .splice_write() for ttys, reinstating the "splice to tty"
functionality that was lost in commit 36e2c7421f02 ("fs: don't allow
splice read/write without explicit ops").
Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops")
Reported-by: Oliver Giles <ohw.giles@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now that the ldisc read() function takes kernel pointers, it's fairly
straightforward to make the tty file operations use .read_iter() instead
of .read().
That automatically gives us vread() and friends, and also makes it
possible to do .splice_read() on ttys again.
Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops")
Reported-by: Oliver Giles <ohw.giles@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The tty line discipline .read() function was passed the final user
pointer destination as an argument, which doesn't match the 'write()'
function, and makes it very inconvenient to do a splice method for
ttys.
This is a conversion to use a kernel buffer instead.
NOTE! It does this by passing the tty line discipline ->read() function
an additional "cookie" to fill in, and an offset into the cookie data.
The line discipline can fill in the cookie data with its own private
information, and then the reader will repeat the read until either the
cookie is cleared or it runs out of data.
The only real user of this is N_HDLC, which can use this to handle big
packets, even if the kernel buffer is smaller than the whole packet.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.
Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120161324.3728294-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is nothing in the driver that uses the definitions
from <asm/cacheflush.h>.
Remove the unused header file inclusion.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210118152154.1644569-2-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The mxs platform is devicetree-only, so there is no need to check
whether it was instantiated via devicetree.
Simplify the code my removing serial_mxs_probe_dt() and add its
content into the main probe function.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210118152154.1644569-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The retrieval of driver data via of_device_get_match_data() can make
the code simpler.
Use of_device_get_match_data() to simplify the code.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210118124447.1632092-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"There are a few more fixes than a normal rc4, largely due to the
bubble introduced by the holiday break:
- return -ENOSYS for syscall number -1, which previously returned an
uninitialized value.
- ensure of_clk_init() has been called in time_init(), without which
clock drivers may not be initialized.
- fix sifive,uart0 driver to properly display the baud rate. A fix to
initialize MPIE that allows interrupts to be processed during
system calls.
- avoid erronously begin tracing IRQs when interrupts are disabled,
which at least triggers suprious lockdep failures.
- workaround for a warning related to calling smp_processor_id()
while preemptible. The warning itself is suprious on currently
availiable systems.
- properly include the generic time VDSO calls. A fix to our kasan
address mapping. A fix to the HiFive Unleashed device tree, which
allows the Ethernet PHY to be properly initialized by Linux (as
opposed to relying on the bootloader).
- defconfig update to include SiFive's GPIO driver, which is present
on the HiFive Unleashed and necessary to initialize the PHY.
- avoid allocating memory while initializing reserved memory.
- avoid allocating the last 4K of memory, as pointers there alias
with syscall errors.
There are also two cleanups that should have no functional effect but
do fix build warnings:
- drop a duplicated definition of PAGE_KERNEL_EXEC.
- properly declare the asm register SP shim.
- cleanup the rv32 memory size Kconfig entry, to reflect the actual
size of memory availiable"
* tag 'riscv-for-linus-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix maximum allowed phsyical memory for RV32
RISC-V: Set current memblock limit
RISC-V: Do not allocate memblock while iterating reserved memblocks
riscv: stacktrace: Move register keyword to beginning of declaration
riscv: defconfig: enable gpio support for HiFive Unleashed
dts: phy: add GPIO number and active state used for phy reset
dts: phy: fix missing mdio device and probe failure of vsc8541-01 device
riscv: Fix KASAN memory mapping.
riscv: Fixup CONFIG_GENERIC_TIME_VSYSCALL
riscv: cacheinfo: Fix using smp_processor_id() in preemptible
riscv: Trace irq on only interrupt is enabled
riscv: Drop a duplicated PAGE_KERNEL_EXEC
riscv: Enable interrupts during syscalls with M-Mode
riscv: Fix sifive serial driver
riscv: Fix kernel time_init()
riscv: return -ENOSYS for syscall -1
|
|
Support for this machine was just removed, so drop the now unused UART
driver, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210115155130.185010-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
vcc_get() returns the port that has provided port->index. As the port that
is about to be removed isn't removed yet this trivially will find this
port. So simplify the call to not assign an identical value to the port
pointer and drop the warning that is never hit.
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210114175718.137483-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If vcc_probe() succeeded dev_set_drvdata() is called with a non-NULL
value, and if vcc_probe() failed vcc_remove() isn't called.
So there is no way dev_get_drvdata() can return NULL in vcc_remove() and
the check can just go away.
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210114175718.137483-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If hvcs_probe() succeeded dev_set_drvdata() is called with a non-NULL
value, and if hvcs_probe() failed hvcs_remove() isn't called.
So there is no way dev_get_drvdata() can return NULL in hvcs_remove() and
the check can just go away.
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210114175718.137483-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Implement 'poll_put_char' and 'poll_get_char' callbacks in struct
'owl_uart_ops' that enables OWL UART to be used for kernel debugging
over serial line.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Link: https://lore.kernel.org/r/026543195b9aeefb339d90abc5660a6ac7463c63.1610484108.git.cristian.ciocaltea@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 757055ae8dedf5333af17b3b5b4b70ba9bc9da4e.
The commit caused that ttynull was used as the default console
on several systems[1][2][3]. As a result, the console was
blank even when a better alternative existed.
It happened when there was no console configured
on the command line and ttynull_init() was the first initcall
calling register_console().
Or it happened when /dev/ did not exist when console_on_rootfs()
was called. It was not able to open /dev/console even though
a console driver was registered. It tried to add ttynull console
but it obviously did not help. But ttynull became the preferred
console and was used by /dev/console when it was available later.
The commit tried to fix a historical problem that have been there
for ages. The primary motivation was the commit 3cffa06aeef7ece30f6
("printk/console: Allow to disable console output by using console=""
or console=null"). It provided a clean solution for a workaround
that was widely used and worked only by chance.
This revert causes that the console="" or console=null command line
options will again work only by chance. These options will cause that
a particular console will be preferred and the default (tty) ones
will not get enabled. There will be no console registered at
all. As a result there won't be stdin, stdout, and stderr for
the init process. But it worked exactly this way even before.
The proper solution has to fulfill many conditions:
+ Register ttynull only when explicitly required or as
the ultimate fallback.
+ ttynull should get associated with /dev/console but it must
not become preferred console when used as a fallback.
Especially, it must still be possible to replace it
by a better console later.
Such a change requires clean up of the register_console() code.
Otherwise, it would be even harder to follow. Especially, the use
of has_preferred_console and CON_CONSDEV flag is tricky. The clean
up is risky. The ordering of consoles is not well defined. And
any changes tend to break existing user settings.
Do the revert at the least risky solution for now.
[1] https://lore.kernel.org/linux-kselftest/20201221144302.GR4077@smile.fi.intel.com/
[2] https://lore.kernel.org/lkml/d2a3b3c0-e548-7dd1-730f-59bc5c04e191@synopsys.com/
[3] https://patchwork.ozlabs.org/project/linux-um/patch/20210105120128.10854-1-thomas@m3y3r.de/
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: Vineet Gupta <vgupta@synopsys.com>
Reported-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Setup the port uartclk in sifive_serial_probe() so that the base baud
rate is correctly printed during device probe instead of always showing
"0". I.e. the probe message is changed from
38000000.serial: ttySIF0 at MMIO 0x38000000 (irq = 1,
base_baud = 0) is a SiFive UART v0
to the correct:
38000000.serial: ttySIF0 at MMIO 0x38000000 (irq = 1,
base_baud = 115200) is a SiFive UART v0
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
n_tty_flush_buffer can happen in parallel with n_tty_close that the
tty->disc_data will be set to NULL. n_tty_flush_buffer accesses
tty->disc_data, so we must prevent n_tty_close clear tty->disc_data
while n_tty_flush_buffer has a non-NULL view of tty->disc_data.
So we need to make sure that accesses to disc_data are atomic using
tty->termios_rwsem.
There is an example I meet:
When n_tty_flush_buffer accesses tty struct, the disc_data is right.
However, then reset_buffer_flags accesses tty->disc_data, disc_data
become NULL, So kernel crash when accesses tty->disc_data->real_tail.
I guess there could be another thread change tty->disc_data to NULL,
and during N_TTY line discipline, n_tty_close will set tty->disc_data
to be NULL. So use tty->termios_rwsem to protect disc_data between close
and flush_buffer.
IP: reset_buffer_flags+0x9/0xf0
PGD 0 P4D 0
Oops: 0002 [#1] SMP
CPU: 23 PID: 2087626 Comm: (agetty) Kdump: loaded Tainted: G
Hardware name: UNISINSIGHT X3036P-G3/ST01M2C7S, BIOS 2.00.13 01/11/2019
task: ffff9c4e9da71e80 task.stack: ffffb30cfe898000
RIP: 0010:reset_buffer_flags+0x9/0xf0
RSP: 0018:ffffb30cfe89bca8 EFLAGS: 00010246
RAX: ffff9c4e9da71e80 RBX: ffff9c368d1bac00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9c4ea17b50f0 RDI: 0000000000000000
RBP: ffffb30cfe89bcc8 R08: 0000000000000100 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000000 R12: ffff9c368d1bacc0
R13: ffff9c20cfd18428 R14: ffff9c4ea17b50f0 R15: ffff9c368d1bac00
FS: 00007f9fbbe97940(0000) GS:ffff9c375c740000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000002260 CR3: 0000002f72233003 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
? n_tty_flush_buffer+0x2a/0x60
tty_buffer_flush+0x76/0x90
tty_ldisc_flush+0x22/0x40
vt_ioctl+0x5a7/0x10b0
? n_tty_ioctl_helper+0x27/0x110
tty_ioctl+0xef/0x8c0
do_vfs_ioctl+0xa7/0x5e0
? __audit_syscall_entry+0xaf/0x100
? syscall_trace_enter+0x1d0/0x2b0
SyS_ioctl+0x79/0x90
do_syscall_64+0x6c/0x1b0
entry_SYSCALL64_slow_path+0x25/0x25
n_tty_flush_buffer --->tty->disc_data is OK
->reset_buffer_flags -->tty->disc_data is NULL
Signed-off-by: Yan.Gao <gao.yanB@h3c.com>
Reviewed-by: Xianting Tian <tian.xianting@h3c.com>
Link: https://lore.kernel.org/r/20201210022507.30729-1-gao.yanB@h3c.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the tty_vhangup() from the pty code and just release the
redirect. The tty_vhangup() results in data loss and data out of order
issues.
If you write to a pty master an immediately close the pty master, the
receiver might get a chunk of data dropped, but then receive some later
data. That's obviously something rather unexpected for a user. It
certainly confused my test program.
It turns out that tty_vhangup() on the slave pty gets called from
pty_close(), and that causes the data on the slave side to be flushed,
but due to races more data can be copied into the slave side's buffer
after that. Consider the following sequence:
thread1 thread2 thread3
------- ------- -------
| |-write data into buffer,
| | n_tty buffer is filled
| | along with other buffers
| |-pty_close(master)
| |--tty_vhangup(slave)
| |---tty_ldisc_hangup()
| |----n_tty_flush_buffer()
| |-----reset_buffer_flags()
|-n_tty_read() |
|--up_read(&tty->termios_rwsem);
| |------down_read(&tty->termios_rwsem)
| |------clear n_tty buffer contents
| |------up_read(&tty->termios_rwsem)
|--tty_buffer_flush_work() |
|--schedules work calling |
| flush_to_ldisc() |
| |-flush_to_ldisc()
| |--receive_buf()
| |---tty_port_default_receive_buf()
| |----tty_ldisc_receive_buf()
| |-----n_tty_receive_buf2()
| |------n_tty_receive_buf_common()
| |-------down_read(&tty->termios_rwsem)
| |-------__receive_buf()
| | copies data into n_tty buffer
| |-------up_read(&tty->termios_rwsem)
|--down_read(&tty->termios_rwsem)
|--copy buffer data to user
>From this sequence, you can see that thread2 writes to the buffer then
only clears the part of the buffer in n_tty. The n_tty receive buffer
code then copies more data into the n_tty buffer.
But part of the vhangup, releasing the redirect, is still required to
avoid issues with consoles running on pty slaves. So do that.
As far as I can tell, that is all that should be required.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20201124004902.1398477-3-minyard@acm.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This will be required by the pty code when it removes tty_vhangup() on
master close.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20201124004902.1398477-2-minyard@acm.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The transmission complete error message provides the status of the
ISR_USART_TC bit. This bit, when set, indicates that the transmission
has not been completed.
The bit status indication is not a very understandable information.
The error message sent on console should indicate that the transmission is
not complete, instead of providing USART_TC bit status.
Update the error message and add a comment for better understanding.
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210106162203.28854-9-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Clean probe and remove port deinit by moving clk_disable_unprepare in a
new dedicated deinit_port function.
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Link: https://lore.kernel.org/r/20210106162203.28854-8-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The comment for conflicting RTS/CTS config refers to "st, hw-flow-ctrl",
but this property is deprecated since the generic RTS/CTS property has
been introduced by the patch 'serial: stm32: Use generic DT binding for
announcing RTS/CTS lines'.
Update the comment to refer to both generic and deprecated RTS/CTS
properties.
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210106162203.28854-7-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update email address add new author in authors list.
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210106162203.28854-5-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Adds the prefix "_usart" in the name of stm32 usart functions in order to
ease the usage of kernel trace and tools, such as f-trace.
Allows to trace "stm32_usart_*" functions with f-trace. Without this patch,
all the driver functions needs to be added manually in f-trace filter.
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20210106162203.28854-4-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
