summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/sirfsoc_uart.h
AgeCommit message (Collapse)Author
2017-11-08tty: serial: Remove redundant license textGreg Kroah-Hartman
Now that the SPDX tag is in all tty files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Jiri Slaby <jslaby@suse.com> Cc: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Joachim Eastwood <manabian@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Russell King <linux@armlinux.org.uk> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Pat Gefre <pfg@sgi.com> Cc: "Guilherme G. Piccoli" <gpiccoli@linux.vnet.ibm.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: "Andreas Färber" <afaerber@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Barry Song <baohua@kernel.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Timur Tabi <timur@tabi.org> Cc: Tony Prisk <linux@prisktech.co.nz> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08tty: add SPDX identifiers to all remaining files in drivers/tty/Greg Kroah-Hartman
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/tty files files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Jiri Slaby <jslaby@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: James Hogan <jhogan@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Joachim Eastwood <manabian@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Russell King <linux@armlinux.org.uk> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: "Uwe Kleine-König" <kernel@pengutronix.de> Cc: Pat Gefre <pfg@sgi.com> Cc: "Guilherme G. Piccoli" <gpiccoli@linux.vnet.ibm.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: "Andreas Färber" <afaerber@suse.de> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Barry Song <baohua@kernel.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Timur Tabi <timur@tabi.org> Cc: Tony Prisk <linux@prisktech.co.nz> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25serial: sirf: make fifo functions staticBen Dooks
The fifo mask functions should be static as they are not used outside of the driver. Fix the following warnings by making them static: drivers/tty/serial/sirfsoc_uart.h:109:5: warning: symbol 'uart_usp_ff_full_mask' was not declared. Should it be static? drivers/tty/serial/sirfsoc_uart.h:117:5: warning: symbol 'uart_usp_ff_empty_mask' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial: sirf: let uart's receive start in right placeQipan Li
While UART work in DMA mode, function start_rx will request descriptor from DMA engine, if there is no left descriptor UART, driver will give err logs "DMA slave single fail". currently start_rx is called in set_termios function, so everytime, port setting will call start_rx once. Now put start_rx in startup, it will be called once while open the port. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial: sirf: workaround rx process to avoid possible data lossQipan Li
when UART works in DMA mode and left bytes in rx fifo less than a dma transfer unit, DMA engine can't transfer the bytes out to rx DMA buffer. so it need a way to fetch them out and flush them into tty buffer in time. in the above case, we want UART switch from DMA mode to PIO mode and fetch && flush bytes into tty layer buffer until rxfifo become empty, after that done let UART switch from PIO mode back to DMA mode. (record as method1) method1 result in the next receive result wrong. for example in PIO part of method1, we fetched && pushed X1...X3 bytes, when UART rxfifo newly received Y1...Y4 bytes, UART trigger a DMA unit transfer, the DMA unit's content is X1...X3Y1 and rxfifo fifo status is empty, so X1X2X3 pushed twice by PIO way and DMA way also the bytes Y2Y3Y4 missed. add rxfifo reset operation before UART switch back to DMA mode would resolve the issue. ([method1 + do fifo reset] record as method2) before the commit, UART driver use method2. but methd2 have a risk of data loss, as if UART's shift register receive a complete byte and transfer it into rxfifo before rxfifo reset operation the byte will loss. UART and USP have the similar bits CLEAR_RX_ADDR_EN(uart)/FRADDR_CLR_EN(usp), When found UART controller changing I/O to DMA mode, UART controller clears the two low bits of read point (rx_fifo_addr[1:0]). when enable the bit + method1(record as method3), in above example the DMA unit's content is X1...X3Y1 and there are Y2Y3Y4 in rxfifo by experiment, we just push bytes in rx DMA buffer. BTW, the workaround works only for UART receive DMA channel use SINGLE DMA mode. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-01serial: sirf: use hrtimer for data rxQipan Li
when the serial works as a bluetooth sink, due to audio realtime requirement, the driver should have something similar with ALSA: 1. one big DMA buffer to easy the schedule jitter 2. split this big DMA buffer to multiple small periods, for each period, we get a DMA interrupt, then push the data to userspace. the small periods will easy the audio latency. so ALSA generally uses a cyclic chained DMA. but for sirfsoc, the dma hardware has the limitation: we have only two loops in the cyclic mode, so we can only support two small periods to switch. if we make the DMA buffer too big, we get long latency, if we make the DMA buffer too little, we get miss in scheduling for audio realtime. so this patch moves to use a hrtimer to simulate the cyclic DMA, then we can have a big buffer, and also have a timely data push to users as the hrtimer can generate in small period then actual HW interrupts. with this patch, we also delete a lot of complex codes to handle loop buffers, and RX timeout interrupt since the RX work can be completely handled from hrtimer interrupt. tests show using this way will make our bad audio streaming be- come smooth. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-01serial: sirf: correct the fifo empty_bitQipan Li
Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24serial: sirf: add serial loopback function supportQipan Li
Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24serial: sirf: enable ATLAS7 USP serial supportQipan Li
differentiate difference port types by re-defining the status MARCO or putting HW differences into private data of the related ports. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-10serial: sirf: use uart_port's fifosize for fifo related operationQipan Li
In SiRF platform, there are different fifo size of uart and usp, with the fifosize configuration changes in different chips, we can not use port line to decide how to check FIFO full,empty and level. There is a direct mapping between FIFO HW register layout with fifo size, so move to use fifosize as the input to check fifo status. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-10serial: sirf: use dynamic method allocate uart structureQipan Li
In different platform of SiRF SoCs, there is no same uart and usp-uart numbers, it is not convenient to use hard-coded ports array and port lines. here we drop the hard-coded ports table , and drop "cell-index". then move to use alias id to get line. for example: aliases { serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; serial3 = &uart3; serial4 = &uart4; serial5 = &uart5; serial6 = &uart6; serial9 = &usp2; }; at the same, enlarge the max port number according to the chip with the most UART. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06Revert "serial: sirf: add a new uart type support"Qipan Li
This reverts commit 52bec4ed4e("serial: sirf: add a new uart type support"). we misunderstood the clock dependency in atlas7. Actually involved several clocks are in a tree structure. we still only need to take the leaf clock node for BT uarts. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Barry.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-09serial: sirf: rename marco to atlas7Barry Song
MARCO will not be supported any more and the project was dropped. it has been replaced by CSR atlas7. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25serial: sirf: add a new uart type supportQipan Li
in CSR A7DA SoC, uart6 located at BT module and it need multiple clock sources, so for "sirf,marco-bt-uart" compatible uarts, drivers take 3 clock sources and enable them. this patch also replaces clk_get by devm_clk_get function and fix DT binding document in which we missed to fix when we added marco platform in commit 909102db44f "serial: sirf: add support for Marco chip". Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09serial: sirf: transfer more bytes once to decrease interruptsQipan Li
the current codes send 1 bytes, then after getting TX done interrupt, send subsequent bytes. it causes redundant interrupts. for example, if we have 3 bytes in TX buffer, the TX flow is: 1. send 1 byte 2. get TX down interrupt 3. send the left 2 bytes 4. get TX down interrupt this patch moves to send more bytes and decrease interrupts, the new flow is: 1. send 3 bytes 2. get TX down interrupt Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-28serial: sirf: fix spinlock deadlock issueQipan Li
commit fb78b811422cd2d8c8605949cc4cc13618347ad5 provide a workaround for kernel panic, but bring potential deadlock risk. that is in sirfsoc_rx_tmo_process_tl while enter into sirfsoc_uart_pio_rx_chars cpu hold uart_port->lock, if uart interrupt comes cpu enter into sirfsoc_uart_isr and deadlock occurs in getting uart_port->lock. the patch replace spin_lock version to spin_lock_irq* version to avoid spinlock dead lock issue. let function tty_flip_buffer_push in tasklet outof spin_lock_irq* protect area to avoid add the pair of spin_lock and spin_unlock for tty_flip_buffer_push. BTW drop self defined unused spinlock protect of tx_lock/rx_lock. 56274.220464] BUG: spinlock lockup suspected on CPU#0, swapper/0/0 [56274.223648] lock: 0xc05d9db0, .magic: dead4ead, .owner: swapper/0/0, .owner_cpu: 0 [56274.231278] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 3.10.35 #1 [56274.238241] [<c0015530>] (unwind_backtrace+0x0/0xf4) from [<c00120d8>] (show_stack+0x10/0x14) [56274.246742] [<c00120d8>] (show_stack+0x10/0x14) from [<c01b11b0>] (do_raw_spin_lock+0x110/0x184) [56274.255501] [<c01b11b0>] (do_raw_spin_lock+0x110/0x184) from [<c02124c8>] (sirfsoc_uart_isr+0x20/0x42c) [56274.264874] [<c02124c8>] (sirfsoc_uart_isr+0x20/0x42c) from [<c0075790>] (handle_irq_event_percpu+0x54/0x17c) [56274.274758] [<c0075790>] (handle_irq_event_percpu+0x54/0x17c) from [<c00758f4>] (handle_irq_event+0x3c/0x5c) [56274.284561] [<c00758f4>] (handle_irq_event+0x3c/0x5c) from [<c0077fa0>] (handle_level_irq+0x98/0xfc) [56274.293670] [<c0077fa0>] (handle_level_irq+0x98/0xfc) from [<c0074f44>] (generic_handle_irq+0x2c/0x3c) [56274.302952] [<c0074f44>] (generic_handle_irq+0x2c/0x3c) from [<c000ef80>] (handle_IRQ+0x40/0x90) [56274.311706] [<c000ef80>] (handle_IRQ+0x40/0x90) from [<c000dc80>] (__irq_svc+0x40/0x70) [56274.319697] [<c000dc80>] (__irq_svc+0x40/0x70) from [<c038113c>] (_raw_spin_unlock_irqrestore+0x10/0x48) [56274.329158] [<c038113c>] (_raw_spin_unlock_irqrestore+0x10/0x48) from [<c0200034>] (tty_port_tty_get+0x58/0x90) [56274.339213] [<c0200034>] (tty_port_tty_get+0x58/0x90) from [<c0212008>] (sirfsoc_uart_pio_rx_chars+0x1c/0xc8) [56274.349097] [<c0212008>] (sirfsoc_uart_pio_rx_chars+0x1c/0xc8) from [<c0212ef8>] (sirfsoc_rx_tmo_process_tl+0xe4/0x1fc) [56274.359853] [<c0212ef8>] (sirfsoc_rx_tmo_process_tl+0xe4/0x1fc) from [<c0027c04>] (tasklet_action+0x84/0x114) [56274.369739] [<c0027c04>] (tasklet_action+0x84/0x114) from [<c0027db4>] (__do_softirq+0x120/0x200) [56274.378585] [<c0027db4>] (__do_softirq+0x120/0x200) from [<c0027f44>] (do_softirq+0x54/0x5c) [56274.386998] [<c0027f44>] (do_softirq+0x54/0x5c) from [<c00281ec>] (irq_exit+0x9c/0xd0) [56274.394899] [<c00281ec>] (irq_exit+0x9c/0xd0) from [<c000ef84>] (handle_IRQ+0x44/0x90) [56274.402790] [<c000ef84>] (handle_IRQ+0x44/0x90) from [<c000dc80>] (__irq_svc+0x40/0x70) [56274.410774] [<c000dc80>] (__irq_svc+0x40/0x70) from [<c0288af4>] (cpuidle_enter_state+0x50/0xe0) [56274.419532] [<c0288af4>] (cpuidle_enter_state+0x50/0xe0) from [<c0288c34>] (cpuidle_idle_call+0xb0/0x148) [56274.429080] [<c0288c34>] (cpuidle_idle_call+0xb0/0x148) from [<c000f3ac>] (arch_cpu_idle+0x8/0x38) [56274.438016] [<c000f3ac>] (arch_cpu_idle+0x8/0x38) from [<c0059344>] (cpu_startup_entry+0xfc/0x140) [56274.446956] [<c0059344>] (cpu_startup_entry+0xfc/0x140) from [<c04a3a54>] (start_kernel+0x2d8/0x2e4) Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-28serial: sirf: move to writel for TXFIFO instead of writebBarry Song
All SiRFSoC UART registers are in 32-bits. If we use writeb for TXFIFO, actually all of 32-bits are still written, for TXTIFO, only low 8-bits are valid, so in prima2&atlas6, this causes no problem. But in the new atlas7, using writeb to write UART registers will cause an imprecise data abort as HW does check the "wrong" writeb. So move to writel and this also makes the code consistent with sirfsoc_uart_pio_tx_chars() in which we use writel. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: sirf: move to use generic dma dt-binding to get dma channelsQipan Li
instead of using sirf specific dma channel property like "sirf,uart-dma-rx-channel" and "sirf,uart-dma-tx-channel", here we move to use generic dma dt-binding to get the channel like: - sirf,uart-dma-rx-channel = <21>; - sirf,uart-dma-tx-channel = <2>; + dmas = <&dmac1 5>, <&dmac0 2>; + dma-names = "rx", "tx"; and we move dma_request_channel() to dma_request_slave_channel(), we don't need to call sirfsoc dma filter function sirfsoc_dma_filter_id() again. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29serial: sirf: remove duplicate definesMichael Opdenacker
This patch removes duplicate defines in drivers/tty/serial/sirfsoc_uart.h Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27serial: sirf: fix the amount of serial portsQipan Li
SiRFprimaII has three uart ports and three USP-based ports, so there are totally six lines instead of five. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27serial: sirf: define macro for some magic numbers of USPQipan Li
this patch clears some magic numbers for offset and bitshift of USP registers. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-19serial: sirf: add DMA support using dmaengine APIsQipan Li
if we get the valid dma channels from dts, move to use dmaengine to do rx/tx. because the dma hardware requires dma address and length to be 4bytes aligned, in this driver, we will still use PIO for non-aligned bytes, and use dma for aligned bytes. for rx, to keep the dmaengine always active, we use double-buffer, so we issue two dma_desc at first, and maintain the status of both 1. dma transfer done: update in rx dma finish callback 2. dma buffer is inserted into tty: update in rx dma finish tasklet and rx timeout tasklet so we re-issue the dma_desc only if both 1&2 are finished. for tx, as we know the actual length for every transfer, we don't need the above double buffering. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14serial: sirf: fix the hardware-flow-ctrl for USP-based UARTQipan Li
for USP-based UART, we use two gpios as RTS and CST pins. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14serial: sirf: drop redundant pinctrl_get_select_default as pinctrl core does itBarry Song
pinctrl core will get default pinmux, so drop it in the sirfsoc serial driver. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12serial: sirf: make the driver also support USP-based UARTQipan Li
Universal Serial Ports (USP) can be used as PCM, UART, SPI, I2S etc. this makes the USP work as UART. the basic work flow is same with UART controller, the main difference will be offset of registers and bits. this patch makes the old sirfsoc uart driver support both sirf UART and USP-based UART by making their differences become private data. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12serial: sirf: add support for Marco chipBarry Song
the marco and coming new CSR multiple SoCs have SET/CLR pair for INTEN registers to avoid some read-modify-write. this patch adds support for this and make the driver support current up and coming mp SoCs. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17serial: sirf: only use lookup table to set baudrate when ioclk=150MHzBarry Song
The fast lookup table to set baudrate is only right when ioclk is 150MHz. for most platforms, ioclk is 150MHz, but some boards might set ioclk to other frequency. so re-calc the clk_div_reg when ioclk is not 150MHz. this patch also gets clk in probe and puts it in remove. Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15serial: sirf: add support for new SiRFmarco SMP SoCBarry Song
CSR SiRFmarco's UART IP is same with SiRFprimaII except that it has two more uart ports. this patch makes the old driver support new SiRFmarco as well: 1. add .compatible = "sirf,marco-uart" to OF match table 2. add two ports in the port table 3. take spin_lock in isr to avoid the conflict of threads opening uart on CPU1 and isr running on CPU0. For 3, we did see some problems on SiRFmarco as SiRFmarco is a SMP SoC but the old SiRFprimaII is UP. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-22serial/sirf: fixup for changes to pin controlLinus Walleij
We changed the signature of the pin multiplexing functions to handle any pin business, so fix up the Sirf driver to call this new interface and rename some variables to make the semantics understandable. Cc: linux-serial@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-11-17UART: add CSR SiRFprimaII SoC on-chip uart driversRong Wang
SiRFprimaII is the latest generation application processor from CSR’s multi-function SoC product family. The SoC support codes are in arch/arm/mach-prima2 from Linux mainline 3.0. There are three dedicated UARTs in system. This patch adds basic driver support for them. It has used the newest pinmux subsystem from Linus Walleij. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rong Wang <Rong.Wang@csr.com> Signed-off-by: Bin Shi <Bin.Shi@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>