summaryrefslogtreecommitdiff
path: root/drivers/thunderbolt
AgeCommit message (Collapse)Author
2020-06-25thunderbolt: Fix path indices used in USB3 tunnel discoveryMika Westerberg
The USB3 discovery used wrong indices when tunnel is discovered. It should use TB_USB3_PATH_DOWN for path that flows downstream and TB_USB3_PATH_UP when it flows upstream. This should not affect the functionality but better to fix it. Fixes: e6f818585713 ("thunderbolt: Add support for USB 3.x tunnels") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable@vger.kernel.org # v5.6+
2020-06-07Merge tag 'usb-5.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY driver updates from Greg KH: "Here are the large set of USB and PHY driver updates for 5.8-rc1. Nothing huge, just lots of little things: - USB gadget fixes and additions all over the place - new PHY drivers - PHY driver fixes and updates - XHCI driver updates - musb driver updates - more USB-serial driver ids added - various USB quirks added - thunderbolt minor updates and fixes - typec updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits) usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs usb: dwc3: meson-g12a: fix error path when fetching the reset line fails Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings" Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180" Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver" USB: serial: ch341: fix lockup of devices with limited prescaler USB: serial: ch341: add basis for quirk detection CDC-ACM: heed quirk also in error handling USB: serial: option: add Telit LE910C1-EUX compositions usb: musb: Fix runtime PM imbalance on error usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle usb: musb: use true for 'use_dma' usb: musb: start session in resume for host port usb: musb: return -ESHUTDOWN in urb when three-strikes error happened USB: serial: qcserial: add DW5816e QDL support thunderbolt: Add trivial .shutdown usb: dwc3: keystone: Turn on USB3 PHY before controller dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property dt-bindings: usb: convert keystone-usb.txt to YAML ...
2020-06-06Merge tag 'pci-v5.8-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Program MPS for RCiEP devices (Ashok Raj) - Fix pci_register_host_bridge() device_register() error handling (Rob Herring) - Fix pci_host_bridge struct device release/free handling (Rob Herring) Resource management: - Allow resizing BARs for devices on root bus (Ard Biesheuvel) Power management: - Reduce Thunderbolt resume time by working around devices that don't support DLL Link Active reporting (Mika Westerberg) - Work around a Pericom USB controller OHCI/EHCI PME# defect (Kai-Heng Feng) Virtualization: - Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok Raj) - Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner) - Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven) Error handling: - Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership (Alexandru Gagniuc, Kuppuswamy Sathyanarayanan) - Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER events (Kuppuswamy Sathyanarayanan) - Don't enable AER by default in Kconfig (Bjorn Helgaas) Peer-to-peer DMA: - Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher) ASPM: - Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng) Endpoint framework: - Fix DMA channel release in test (Kunihiko Hayashi) - Add page size as argument to pci_epc_mem_init() (Lad Prabhakar) - Add support to handle multiple base for mapping outbound memory (Lad Prabhakar) Generic host bridge driver: - Support building as module (Rob Herring) - Eliminate pci_host_common_probe wrappers (Rob Herring) Amlogic Meson PCIe controller driver: - Don't use FAST_LINK_MODE to set up link (Marc Zyngier) Broadcom STB PCIe controller driver: - Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan) - Fix clk_put() error (Jim Quinlan) - Fix window register offset (Jim Quinlan) - Assert fundamental reset on initialization (Nicolas Saenz Julienne) - Add notify xHCI reset property (Nicolas Saenz Julienne) - Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas Saenz Julienne) - Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas Saenz Julienne) Cadence PCIe controller driver: - Remove "cdns,max-outbound-regions" DT property (replaced by "ranges") (Kishon Vijay Abraham I) - Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT (Kishon Vijay Abraham I) Marvell Aardvark PCIe controller driver: - Improve link training (Marek Behún) - Add PHY support (Marek Behún) - Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek Behún) - Train link immediately after enabling training to work around detection issues with some cards (Pali Rohár) - Issue PERST via GPIO to work around detection issues (Pali Rohár) - Don't blindly enable ASPM L0s (Pali Rohár) - Replace custom macros by standard linux/pci_regs.h macros (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix probe failure path to release resource (Wei Hu) - Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu) Renesas R-Car PCIe controller driver: - Fix incorrect programming of OB windows (Andrew Murray) - Add suspend/resume (Kazufumi Ikeda) - Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar) - Add endpoint controller driver (Lad Prabhakar) - Fix PCIEPAMR mask calculation (Lad Prabhakar) - Add r8a77961 to DT binding (Yoshihiro Shimoda) Socionext UniPhier Pro5 controller driver: - Add endpoint controller driver (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Program outbound ATU upper limit register (Alan Mikhak) - Fix inner MSI IRQ domain registration (Marc Zyngier) Miscellaneous: - Check for platform_get_irq() failure consistently (negative return means failure) (Aman Sharma) - Fix several runtime PM get/put imbalances (Dinghao Liu) - Use flexible-array and struct_size() helpers for code cleanup (Gustavo A. R. Silva) - Update & fix issues in bridge emulation of PCIe registers (Jon Derrick) - Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc) (Krzysztof Wilczyński) - Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)" * tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits) PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints PCI/DPC: Print IRQ number used by port PCI/AER: Use "aer" variable for capability offset PCI/AER: Remove redundant dev->aer_cap checks PCI/AER: Remove redundant pci_is_pcie() checks PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership PCI: tegra: Fix runtime PM imbalance on error PCI: vmd: Filter resource type bits from shadow register PCI: tegra194: Fix runtime PM imbalance on error dt-bindings: PCI: Add UniPhier PCIe endpoint controller description PCI: hv: Use struct_size() helper PCI: Rename _DSM constants to align with spec PCI: Avoid FLR for AMD Starship USB 3.0 PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0 x86/PCI: Drop unused xen_register_pirq() gsi_override parameter PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link PCI: dwc: Fix inner MSI IRQ domain registration PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname() ...
2020-05-26Merge tag 'thunderbolt-for-v5.8' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next Mika writes: thunderbolt: Changes for v5.8 merge window This adds support for Intel Tiger Lake Thunderbolt controller using firmware based connection manager. In addition the driver can now be built on non-x86 architectures as well. Then there are a couple of commits that make the driver work across kexec, replace a zero length array with flexible one, and revert one change that is not needed anymore because of NVMem subsystem improvements. * tag 'thunderbolt-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Add trivial .shutdown thunderbolt: Update Kconfig to allow building on other architectures. thunderbolt: Replace zero-length array with flexible-array thunderbolt: Add support for Intel Tiger Lake Revert "thunderbolt: Prevent crash if non-active NVMem file is read"
2020-05-25thunderbolt: Add trivial .shutdownMaxim Levitsky
On my machine, a kexec with this driver loaded in the old kernel causes a very long delay on boot in the kexec'ed kernel, most likely due to unclean shutdown prior to that. Unloading thunderbolt driver prior to kexec allows kexec to work as fast as regular kernel boot, as well as adding this .shutdown pointer. Shutting a device prior to the shutdown completely is always a good idea IMHO to help with kexec, and this one-liner patch implements it. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-05-14PCI: Unify pcie_find_root_port() and pci_find_pcie_root_port()Yicong Yang
Previously we used pcie_find_root_port() to find a Root Port from a PCIe device and pci_find_pcie_root_port() to find a Root Port from a Conventional PCI device. Unify the two functions and use pcie_find_root_port() to find a Root Port from either a Conventional PCI device or a PCIe device. Then there is no need to distinguish the type of the device. Link: https://lore.kernel.org/r/1589019568-5216-1-git-send-email-yangyicong@hisilicon.com Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # thunderbolt
2020-05-13thunderbolt: Update Kconfig to allow building on other architectures.David Manouchehri
Thunderbolt 3 and USB4 shouldn't be x86 only. Tested on a SolidRun HoneyComb (ARM Cortex-A72) with a Gigabyte Titan Ridge Thunderbolt 3 PCIe card (JHL7540). Signed-off-by: David Manouchehri <david.manouchehri@riseup.net> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-04-28thunderbolt: Check return value of tb_sw_read() in usb4_switch_op()Mika Westerberg
The function misses checking return value of tb_sw_read() before it accesses the value that was read. Fix this by checking the return value first. Fixes: b04079837b20 ("thunderbolt: Add initial support for USB4") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkelshb@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23thunderbolt: Add support for Intel Tiger LakeMika Westerberg
Tiger Lake integrated Thunderbolt/USB4 controller is quite close to Intel Ice Lake. By default it is still using firmware based connection manager so we can use most of the Ice Lake flows in Tiger Lake as well. We check if the firmware connection manager is running and in that case use it, otherwise use the software based connection manager. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Yehezkel Bernat <yehezkelshb@gmail.com>
2020-04-16Revert "thunderbolt: Prevent crash if non-active NVMem file is read"Nicholas Johnson
This reverts commit 03cd45d2e219301880cabc357e3cf478a500080f. Commit 664f0549380c ("nvmem: core: use is_bin_visible for permissions") incidentally adds support for write-only nvmem. Hence, this workaround is no longer required, so drop it. Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-03-23Merge 5.6-rc7 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17Merge tag 'thunderbolt-for-v5.7' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next Mika writes: thunderbolt: Changes for v5.7 merge window - A couple of commits that make the driver to use flexible-array member instead of zero-length array extension. This allows compiler to issue a warning if the flexible array is not the last member of a structure. - Use scnprintf() instead of snprintf() to avoid potential buffer overflow. * tag 'thunderbolt-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Use scnprintf() for avoiding potential buffer overflow thunderbolt: icm: Replace zero-length array with flexible-array member thunderbolt: eeprom: Replace zero-length array with flexible-array member
2020-03-12thunderbolt: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-03-04thunderbolt: Fix error code in tb_port_is_width_supported()Dan Carpenter
This function is type bool, and it's supposed to return true on success. Unfortunately, this path takes negative error codes and casts them to bool (true) so it's treated as success instead of failure. Fixes: 91c0c12080d0 ("thunderbolt: Add support for lane bonding") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-02-24Merge 5.6-rc3 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-14thunderbolt: Add missing kernel-doc parameter descriptionsMika Westerberg
Two functions that were added for USB4 support miss kernel-doc parameter descriptions so add them now. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20200214121638.75589-1-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-14thunderbolt: icm: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertenly introduced[3] to the codebase from now on. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-02-14thunderbolt: eeprom: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertenly introduced[3] to the codebase from now on. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-02-13thunderbolt: Prevent crash if non-active NVMem file is readMika Westerberg
The driver does not populate .reg_read callback for the non-active NVMem because the file is supposed to be write-only. However, it turns out NVMem subsystem does not yet support this and expects that the .reg_read callback is provided. If user reads the binary attribute it triggers NULL pointer dereference like this one: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: bin_attr_nvmem_read+0x64/0x80 kernfs_fop_read+0xa7/0x180 vfs_read+0xbd/0x170 ksys_read+0x5a/0xd0 do_syscall_64+0x43/0x150 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this in the driver by providing .reg_read callback that always returns an error. Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Fixes: e6b245ccd524 ("thunderbolt: Add support for host and device NVM firmware upgrade") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200213095604.1074-1-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14thunderbolt: fix memory leak of object swColin Ian King
In the case where the call tb_switch_exceeds_max_depth is true the error reurn path leaks memory in sw. Fix this by setting the return error code to -EADDRNOTAVAIL and returning via the error exit path err_free_sw_ports to free sw. sw has been kzalloc'd so the free of the NULL sw->ports is fine. Addresses-Coverity: ("Resource leak") Fixes: b04079837b20 ("thunderbolt: Add initial support for USB4") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191220220526.11307-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-08thunderbolt: Fix xhci check in usb4_switch_setup()Mika Westerberg
The code tried to check whether xhci variable has ROUTER_CS_6_HCI bit set but since xhci type is bool and it already holds true or false based on that very bit, fix the check to use the variable directly. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: b04079837b20 ("thunderbolt: Add initial support for USB4") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20200108125317.36444-2-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18thunderbolt: Add support for USB 3.x tunnelsRajmohan Mani
USB4 added a capability to tunnel USB 3.x protocol over the USB4 fabric. USB4 device routers may include integrated SuperSpeed HUB or a function or both. USB tunneling follows PCIe so that the tunnel is created between the parent and the child router from USB3 downstream adapter port to USB3 upstream adapter port over a single USB4 link. This adds support for USB 3.x tunneling and also capability to discover existing USB 3.x tunnels (for example created by connection manager in boot firmware). Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191217123345.31850-9-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18thunderbolt: Add support for Time Management UnitRajmohan Mani
Time Management Unit (TMU) is included in each USB4 router. It is used to synchronize time across the USB4 fabric. By default when USB4 router is plugged to the domain, its TMU is turned off. This differs from Thunderbolt (1, 2 and 3) devices whose TMU is by default configured to bi-directional HiFi mode. Since time synchronization is needed for proper Display Port tunneling this means we need to configure the TMU on USB4 compliant devices. The USB4 spec allows some flexibility on how the TMU can be configured. This makes it possible to enable link power management states (CLx) in certain topologies, where for example DP tunneling is not used. TMU can also be re-configured dynamicaly depending on types of tunnels created over the USB4 fabric. In this patch we simply configure the TMU to be in bi-directional HiFi mode. This way we can tunnel any kind of traffic without need to perform complex steps to re-configure the domain dynamically. We can add more fine-grained TMU configuration later on when we start enabling CLx states. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191217123345.31850-8-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18thunderbolt: Make tb_switch_find_cap() available to other filesRajmohan Mani
We need to find switch capabilities in order to implement TMU support so make it available to other files as well. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191217123345.31850-7-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18thunderbolt: Update Kconfig entries to USB4Mika Westerberg
Since the driver now supports USB4 which is the standard going forward, update the Kconfig entry to mention this and rename the entry from CONFIG_THUNDERBOLT to CONFIG_USB4 instead to help people to find the correct option if they want to enable USB4. Also do the same for Thunderbolt network driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Link: https://lore.kernel.org/r/20191217123345.31850-6-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18thunderbolt: Add initial support for USB4Mika Westerberg
USB4 is the public specification based on Thunderbolt 3 protocol. There are some differences in register layouts and flows. In addition to PCIe and DP tunneling, USB4 supports tunneling of USB 3.x. USB4 is also backward compatible with Thunderbolt 3 (and older generations but the spec only talks about 3rd generation). USB4 compliant devices can be identified by checking USB4 version field in router configuration space. This patch adds initial support for USB4 compliant hosts and devices which enables following features provided by the existing functionality in the driver: - PCIe tunneling - Display Port tunneling - Host and device NVM firmware upgrade - P2P networking This brings the USB4 support to the same level that we already have for Thunderbolt 1, 2 and 3 devices. Note the spec talks about host and device "routers" but in the driver we still use term "switch" in most places. Both can be used interchangeably. Co-developed-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191217123345.31850-5-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18thunderbolt: Populate PG field in hot plug acknowledgment packetMika Westerberg
USB4 1.0 section 6.4.2.7 specifies a new field (PG) in notification packet that is sent as response of hot plug/unplug events. This field tells whether the acknowledgment is for plug or unplug event. This needs to be set accordingly in order the router to send further hot plug notifications. To make it simpler we fill the field unconditionally. Legacy devices do not look at this field so there should be no problems with them. While there rename tb_cfg_error() to tb_cfg_ack_plug() and update the log message accordingly. The function is only used to ack plug/unplug events. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191217123345.31850-4-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18thunderbolt: Call tb_eeprom_get_drom_offset() from tb_eeprom_read_n()Mika Westerberg
We are going to re-use tb_drom_read() for USB4 DROM reading as well. USB4 has separate router operations for this which does not need the drom_offset. Therefore we move call to tb_eeprom_get_drom_offset() into tb_eeprom_read_n() where it is needed. While there change return -ENOSYS to -ENODEV because the former is only supposed to be used with system calls (invalid syscall nr). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191217123345.31850-3-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18thunderbolt: Make tb_find_port() available to other filesMika Westerberg
We will be needing this when adding initial USB4 support so make it available to other files in the driver as well. We also rename it to tb_switch_find_port() to follow conventions used in switch.c. No functional changes. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191217123345.31850-2-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-19thunderbolt: Power cycle the router if NVM authentication failsMika Westerberg
On zang's Dell XPS 13 9370 after Thunderbolt NVM firmware upgrade the Thunderbolt controller did not come back as expected. Only after the system was rebooted it became available again. It is not entirely clear what happened but I suspect the new NVM firmware image authentication failed for some reason. Regardless of this the router needs to be power cycled if NVM authentication fails in order to get it fully functional again. This modifies the driver to issue a power cycle in case the NVM authentication fails immediately when dma_port_flash_update_auth() returns. We also need to call tb_switch_set_uuid() earlier to be able to fetch possible NVM authentication failure when DMA port is added. Link: https://bugzilla.kernel.org/show_bug.cgi?id=205457 Reported-by: zang <dump@tzib.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-02thunderbolt: Do not start firmware unless asked by the userMika Westerberg
Since now we can do pretty much the same thing in the software connection manager than the firmware would do, there is no point starting it by default. Instead we can just continue using the software connection manager. Make it possible for user to switch between the two by adding a module pararameter (start_icm) which is by default false. Having this ability to enable the firmware may be useful at least when debugging possible issues with the software connection manager implementation. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-02thunderbolt: Add bandwidth management for Display Port tunnelsMika Westerberg
Titan Ridge supports Display Port 1.4 which adds HBR3 (High Bit Rate) rates that may be up to 8.1 Gb/s over 4 lanes. This translates to effective data bandwidth of 25.92 Gb/s (as 8/10 encoding is removed by the DP adapters when going over Thunderbolt fabric). If another high rate monitor is connected we may need to reduce the bandwidth it consumes so that it fits into the total 40 Gb/s available on the Thunderbolt fabric. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-02thunderbolt: Add Display Port adapter pairing and resource managementMika Westerberg
To perform proper Display Port tunneling for Thunderbolt 3 devices we need to allocate DP resources for DP IN port before they can be used. The reason for this is that the user can also connect a monitor directly to the Type-C ports in which case the Thunderbolt controller acts as re-driver for Display Port (no tunneling takes place) taking the DP sinks away from the connection manager. This allocation is done using special sink allocation registers available through the link controller. We can pair DP IN to DP OUT only if * DP IN has sink allocated via link controller * DP OUT port receives hotplug event For DP IN adapters (only for the host router) we first query whether there is DP resource available (it may be the previous instance of the driver for example already allocated it) and if it is we add it to the list. We then update the list when after each plug/unplug event to a DP IN/OUT adapter. Each time the list is updated we try to find additional DP IN <-> DP OUT pairs for tunnel establishment. This strategy also makes it possible to establish another tunnel in case there are 3 monitors connected and one gets unplugged releasing the DP IN adapter for the new tunnel. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-02thunderbolt: Add Display Port CM handshake for Titan Ridge devicesMika Westerberg
Titan Ridge needs an additional connection manager handshake in order to do proper Display Port tunneling so implement it here. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-02thunderbolt: Add downstream PCIe port mappings for Alpine and Titan RidgeMika Westerberg
In order to keep PCIe hierarchies consistent across hotplugs, add hard-coded PCIe downstream port to Thunderbolt port for Alpine Ridge and Titan Ridge as well. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-02thunderbolt: Expand controller name in tb_switch_is_xy()Mika Westerberg
For a casual reader tb_switch_is_cr() does not tell much so instead spell out the full controller name in the function name. For example tb_switch_is_cr() becomes tb_switch_is_cactus_ridge() which is easier to understand. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-02thunderbolt: Add default linking between lane adapters if not provided by DROMMika Westerberg
We currently read how sibling lane adapter ports relate each other from DROM (Device ROM). If the two lane adapter ports go through the same physical connector these lanes can then be bonded together. However, some cases DROM does not provide this information or it is missing completely (host routers typically do not have DROM). In this case we have hard-coded the relationship. Expand this to work with both legacy devices where lane adapter ports 1 and 2, and 3 and 4 are always linked together, and with USB4 devices where lane adapter 1 is always following lane adapter 0 or is disabled completely (see USB4 section 5.2.1 for more information). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-02thunderbolt: Add support for lane bondingMika Westerberg
Lane bonding allows aggregating two 10/20 Gb/s (depending on the generation) lanes into a single 20/40 Gb/s bonded link. This allows sharing the full bandwidth more efficiently. In order to establish lane bonding we need to check that lane bonding is possible through link controller and that both ends of the link actually supports 2x widths. This also means that all the paths should be established through the primary port so update tb_path_alloc() to handle this as well. Lane bonding is supported starting from Falcon Ridge (2nd generation) controllers. We also expose the current speed and number of lanes under each device except the host router following similar attribute naming than USB bus. Expose speed and number of lanes for both directions to allow possibility of asymmetric link in the future. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-01thunderbolt: Refactor add_switch() into two functionsMika Westerberg
Currently add_switch() takes a huge amount of parameters that makes it hard to maintain. Instead of passing all those parameters we can split the function into two parts (alloc and add) and fill the additional switch fields directly in the functions calling those. While there remove redundant error logging in case kmemdup() fails. No functional changes. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-01thunderbolt: Add helper macro to iterate over switch portsMika Westerberg
There are quite many places in the driver where we iterate over each port in the switch. To make it bit more convenient, add a macro that can be used to iterate over each port and convert existing call sites to use it. This is based on code by Lukas Wunner. No functional changes. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-01thunderbolt: Make tb_sw_write() take const parameterMika Westerberg
The function does not modify the argument in any way so make it const. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-01thunderbolt: Convert DP adapter register names to follow the USB4 specMika Westerberg
Now that USB4 spec has names for these DP adapter registers we can use them instead. This makes it easier to match certain register to the spec. No functional changes. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-01thunderbolt: Convert PCIe adapter register names to follow the USB4 specMika Westerberg
Now that USB4 spec has names for these PCIe adapter registers we can use them instead. This makes it easier to match certain register to the spec. No functional changes. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-01thunderbolt: Convert basic adapter register names to follow the USB4 specMika Westerberg
Now that USB4 spec has names for these basic registers we can use them instead. This makes it easier to match certain register to the spec. No functional changes. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-01thunderbolt: Log error if adding switch failsMika Westerberg
If we fail to add a switch for some reason log an error instead of keeping silent. This is useful for debugging. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-01thunderbolt: Log switch route string on config read/write timeoutMika Westerberg
This helps to point out which switch config read/write triggered the timeout. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-01thunderbolt: Introduce tb_switch_is_icm()Mika Westerberg
We currently differentiate between SW CM (Software Connection Manager, sometimes also called External Connection Manager) and ICM (Firmware based Connection Manager, Internal Connection Manager) by looking directly at the sw->config.enabled field which may be rather hard to understand for the casual reader. For this reason introduce a wrapper function with documentation that should make the intention more clear. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-01Merge branch 'thunderbolt/fixes' into thunderbolt/nextMika Westerberg
2019-10-09thunderbolt: Add 'generation' attribute for devicesChristian Kellner
The Thunderbolt standard went through several major iterations, here called generation. USB4, which will be based on Thunderbolt, will be generation 4. Let userspace know the generation of the controller in the devices in order to distinguish between Thunderbolt and USB4, so it can be shown in various user interfaces. Signed-off-by: Christian Kellner <christian@kellner.me> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-10-08thunderbolt: Drop unnecessary read when writing LC command in Ice LakeMika Westerberg
The read is not needed as we overwrite the returned value in the next line anyway so drop it. Fixes: 3cdb9446a117 ("thunderbolt: Add support for Intel Ice Lake") Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 06:30:39 +0000