summaryrefslogtreecommitdiff
path: root/drivers/thunderbolt/nhi.c
AgeCommit message (Collapse)Author
2017-10-02thunderbolt: Allocate ring HopID automatically if requestedMika Westerberg
Thunderbolt services should not care which HopID (ring) they use for sending and receiving packets over the high-speed DMA path, so make tb_ring_alloc_rx() and tb_ring_alloc_tx() accept negative HopID. This means that the NHI will allocate next available HopID for the caller automatically. These HopIDs will be allocated from the range which is not reserved for the Thunderbolt protocol (8 .. hop_count - 1). The allocated HopID can be retrieved from ring->hop field after the ring has been allocated successfully if needed. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Add polling mode for ringsMika Westerberg
In order to support things like networking over Thunderbolt cable, there needs to be a way to switch the ring to a mode where it can be polled with the interrupt masked. We implement such mode so that the caller can allocate a ring by passing pointer to a function that is then called when an interrupt is triggered. Completed frames can be fetched using tb_ring_poll() and the interrupt can be re-enabled when the caller is finished with polling by using tb_ring_poll_complete(). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Use spinlock in NHI serializationMika Westerberg
This is needed because ring polling functionality can be called from atomic contexts when networking and other high-speed traffic is transferred over a Thunderbolt cable. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Use spinlock in ring serializationMika Westerberg
This makes it possible to enqueue frames also from atomic context which is needed for example, when networking packets are sent over a Thunderbolt cable. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Export ring handling functions to modulesMika Westerberg
These are used by Thunderbolt services to send and receive frames over the high-speed DMA rings. We also put the functions to tb_ namespace to make sure we do not collide with others and add missing kernel-doc comments for the exported functions. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Add support for frame modeMika Westerberg
When high-speed DMA paths are used to transfer arbitrary data over a Thunderbolt link, DMA rings should be in frame mode instead of raw mode. The latter is used by the control channel (ring 0). In frame mode each data frame can hold up to 4kB payload. This patch modifies the DMA ring code to allow configuring a ring to be in frame mode by passing a new flag (RING_FLAG_FRAME) to the ring when it is allocated. In addition there might be need to enable end-to-end (E2E) workaround for the ring to prevent losing Rx frames in certain situations. We add another flag (RING_FLAG_E2E) that can be used for this purpose. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Configure interrupt throttling for all interruptsMika Westerberg
This will keep the interrupt delivery rate reasonable. The value used here (128 us) is a recommendation from the hardware people. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09thunderbolt: Add support for Internal Connection Manager (ICM)Mika Westerberg
Starting from Intel Falcon Ridge the internal connection manager running on the Thunderbolt host controller has been supporting 4 security levels. One reason for this is to prevent DMA attacks and only allow connecting devices the user trusts. The internal connection manager (ICM) is the preferred way of connecting Thunderbolt devices over software only implementation typically used on Macs. The driver communicates with ICM using special Thunderbolt ring 0 (control channel) messages. In order to handle these messages we add support for the ICM messages to the control channel. The security levels are as follows: none - No security, all tunnels are created automatically user - User needs to approve the device before tunnels are created secure - User need to approve the device before tunnels are created. The device is sent a challenge on future connects to be able to verify it is actually the approved device. dponly - Only Display Port and USB tunnels can be created and those are created automatically. The security levels are typically configurable from the system BIOS and by default it is set to "user" on many systems. In this patch each Thunderbolt device will have either one or two new sysfs attributes: authorized and key. The latter appears for devices that support secure connect. In order to identify the device the user can read identication information, including UUID and name of the device from sysfs and based on that make a decision to authorize the device. The device is authorized by simply writing 1 to the "authorized" sysfs attribute. This is following the USB bus device authorization mechanism. The secure connect requires an additional challenge step (writing 2 to the "authorized" attribute) in future connects when the key has already been stored to the NVM of the device. Non-ICM systems (before Alpine Ridge) continue to use the existing functionality and the security level is set to none. For systems with Alpine Ridge, even on Apple hardware, we will use ICM. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09thunderbolt: Do not touch the hardware if the NHI is gone on resumeMika Westerberg
On PCs the NHI host controller is only present when there is a device connected. When the last device is disconnected the host controller will dissappear shortly (within 10s). Now if that happens when we are suspended we should not try to touch the hardware anymore, so add a flag for this and check it before we re-enable rings. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09thunderbolt: Add support for NHI mailboxMika Westerberg
The host controller includes two sets of registers that are used to communicate with the firmware. Add functions that can be used to access these registers. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09thunderbolt: Add new Thunderbolt PCI IDsMika Westerberg
Add Intel Win Ridge (Thunderbolt 2) and Alpine Ridge (Thunderbolt 3) controller PCI IDs to the list of supported devices. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09thunderbolt: Introduce thunderbolt bus and connection managerMika Westerberg
Thunderbolt fabric consists of one or more switches. This fabric is called domain and it is controlled by an entity called connection manager. The connection manager can be either internal (driven by a firmware running on the host controller) or external (software driver). This driver currently implements support for the latter. In order to manage switches and their properties more easily we model this domain structure as a Linux bus. Each host controller adds a domain device to this bus, and these devices are named as domainN where N stands for index or id of the current domain. We then abstract connection manager specific operations into a new structure tb_cm_ops and convert the existing tb.c to fill those accordingly. This makes it easier to add support for the internal connection manager in subsequent patches. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09thunderbolt: Add MSI-X supportMika Westerberg
Intel Thunderbolt controllers support up to 16 MSI-X vectors. Using MSI-X is preferred over MSI or legacy interrupt and may bring additional performance because there is no need to check the status registers which interrupt was triggered. While there we convert comments in structs tb_ring and tb_nhi to follow kernel-doc format more closely. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31thunderbolt: Add support for INTEL_FALCON_RIDGE_2C controller.Xavier Gnata
From: Xavier Gnata <xavier.gnata@gmail.com> Add support to INTEL_FALCON_RIDGE_2C controller and corresponding quirk to support suspend/resume. Tested against 4.7 master on a MacBook Air 11" 2015. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-08thunderbolt: Support 1st gen Light Ridge controllerLukas Wunner
Add support for the 1st gen Light Ridge controller, which is built into these systems: iMac12,1 2011 21.5" iMac12,2 2011 27" Macmini5,1 2011 i5 2.3 GHz Macmini5,2 2011 i5 2.5 GHz Macmini5,3 2011 i7 2.0 GHz MacBookPro8,1 2011 13" MacBookPro8,2 2011 15" MacBookPro8,3 2011 17" MacBookPro9,1 2012 15" MacBookPro9,2 2012 13" Light Ridge (CV82524) was the very first copper Thunderbolt controller, introduced 2010 alongside its fiber-optic cousin Light Peak (CVL2510). Consequently the chip suffers from some teething troubles: - MSI is broken for hotplug signaling on the downstream bridges: The chip just never sends an interrupt. It requests 32 MSIs for each of its six bridges and the pcieport driver only allocates one per bridge. However I've verified that even if 32 MSIs are allocated there's no interrupt on hotplug. The only option is thus to disable MSI, which is also what OS X does. Apparently all Thunderbolt chips up to revision 1 of Cactus Ridge 4C are plagued by this issue so quirk those as well. - The chip supports a maximum hop_count of 32, unlike its successors which support only 12. Fixup ring_interrupt_active() to cope with values >= 32. - Another peculiarity is that the chip supports a maximum of 13 ports whereas its successors support 12. However the additional port (#5) seems to be unusable as reading its TB_CFG_PORT config space results in TB_CFG_ERROR_INVALID_CONFIG_SPACE. Add a quirk to mark the port disabled on the root switch, assuming that's necessary on all Macs using this chip. Tested-by: Lukas Wunner <lukas@wunner.de> [MacBookPro9,1] Tested-by: William Brown <william@blackhats.net.au> [MacBookPro8,2] Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Andreas Noever <andreas.noever@gmail.com>
2016-04-08PCI: Add Intel Thunderbolt device IDsLukas Wunner
Intel Gen 1 and 2 chips use the same ID for NHI, bridges and switch. Gen 3 chips and onward use a distinct ID for the NHI. No functional change intended. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Andreas Noever <andreas.noever@gmail.com>
2015-09-20thunderbolt: Allow loading of module on recent Apple MacBooks with ↵Knuth Posern
thunderbolt 2 controller The pci device ids listed in the thunderbolt driver are to restrictive, which prevents the driver from being loaded on recent Apple MacBooks using a thunderbolt 2 controller. In particular this prevented any hot-plugging functionality for thunderbolt based ethernet dongles (i.e. Apples thunderbolt gigabit ethernet broadcom tg3 based dongle Model A1433 EMC 2590). Changing the subvendor and subdevice to PCI_ANY_ID the thunderbolt driver loads and binds to the pci device 07:00.0 System peripheral: Intel Corporation Device 156c which is the thunderbolt 2 controller on the MacBookPro12,1. Successfully tested on MacBookPro12,1. With the patch the thunderbolt module gets now loaded on boot. And it provides hot-plugging support both for a cold-plugged and a warm-plugged ethernet dongle. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Acked-by: Knuth Posern <knuth@posern.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-13thunderbolt: Use kcallocHimangi Saraogi
The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-07thunderbolt: Correct the size argument to devm_kzallocHimangi Saraogi
nhi->rx_rings does not have type as struct tb_ring *, as it is a double pointer so the elements of the array should have pointer type, not structure type. The Coccinelle semantic patch that makes this change is as follows: // <smpl> @disable sizeof_type_expr@ type T; T **x; @@ x = <+...sizeof( - T + *x )...+> // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Cc: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20thunderbolt: Staticize nhi_idsSachin Kamat
'nhi_ids' is local to this file. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Acked-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20thunderbolt: Use NULL instead of 0 in nhi.cSachin Kamat
'descriptors' is a pointer. Use NULL isntead of 0. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Acked-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Add suspend/hibernate supportAndreas Noever
We use _noirq since we have to restore the pci tunnels before the pci core wakes the tunneled devices. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Setup control channelAndreas Noever
Add struct tb which will contain our view of the thunderbolt bus. For now it just contains a pointer to the control channel and a workqueue for hotplug events. Add thunderbolt_alloc_and_start() and thunderbolt_shutdown_and_free() which are responsible for setup and teardown of struct tb. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Add initial cactus ridge NHI supportAndreas Noever
Thunderbolt hotplug is supposed to be handled by the firmware. But Apple decided to implement thunderbolt at the operating system level. The firmare only initializes thunderbolt devices that are present at boot time. This driver enables hotplug of thunderbolt of non-chained thunderbolt devices on Apple systems with a cactus ridge controller. This first patch adds the Kconfig file as well the parts of the driver which talk directly to the hardware (that is pci device setup, interrupt handling and RX/TX ring management). Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>