summaryrefslogtreecommitdiff
path: root/drivers/thermal
AgeCommit message (Collapse)Author
2019-03-08Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal soc updates from Eduardo Valentin: "Specifics: - mediatek thermal now supports MT8183 - broadcom thermal now supports Stingray - qoirq now supports multiple sensors - fixes on different drivers: rcar, tsens, tegra Some new drivers are still pending further review and I chose to leave them for the next merge window while still sending this material" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: rcar_gen3_thermal: Register hwmon sysfs interface thermal/qcom/tsens-common : fix possible object reference leak thermal: tegra: add get_trend ops thermal: tegra: fix memory allocation thermal: tegra: remove unnecessary warnings thermal: mediatek: add support for MT8183 dt-bindings: thermal: add binding document for mt8183 thermal controller thermal: mediatek: add flag for bank selection thermal: mediatek: add thermal controller offset thermal: mediatek: add calibration item thermal: mediatek: add common index of vts settings. thermal: mediatek: fix register index error thermal: qoriq: add multiple sensors support thermal: broadcom: Add Stingray thermal driver dt-bindings: thermal: Add binding document for SR thermal
2019-02-24Merge back earlier cpufreq material for v5.1.Rafael J. Wysocki
2019-02-20thermal: rcar_gen3_thermal: Register hwmon sysfs interfaceMarek Vasut
Register the hwmon sysfs interface on R-Car Gen3 thermal driver to align it with Gen2 driver. Use devm_add_action() to unregister the hwmon interface automatically. Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: linux-renesas-soc@vger.kernel.org To: linux-pm@vger.kernel.org From: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-20thermal/qcom/tsens-common : fix possible object reference leakPeng Hao
of_find_device_by_node() takes a reference to the struct device when it finds a match via get_device. We also should make sure to drop the reference to the device taken by of_find_device_by_node() when returning error. Signed-off-by: Peng Hao <peng.hao2@zte.com.cn> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-20thermal: tegra: add get_trend opsWei Ni
Add support for get_trend ops that allows soctherm sensors to be used with the step-wise governor. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-20thermal: tegra: fix memory allocationWei Ni
Fix memory allocation to store the pointers to thermal_zone_device. Signed-off-by: Wei Ni <wni@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-20thermal: tegra: remove unnecessary warningsWei Ni
Convert warnings to info as not all platforms may have all the thresholds and sensors enabled. Signed-off-by: Wei Ni <wni@nvidia.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-20thermal: mediatek: add support for MT8183Michael Kao
MT8183 has two built-in thermal controllers with total six thermal sensors. And it doesn't have bank, so doesn't need to select bank. This patch adds support for mt8183. Signed-off-by: Michael Kao <michael.kao@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: mediatek: add flag for bank selectionMichael Kao
For past ic designs, the thermal controller should select banks before reading the thermal sensor. And the new ic design architecture removes this mechanism. Signed-off-by: Michael Kao <michael.kao@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: mediatek: add thermal controller offsetMichael Kao
One thermal controller can read four sensors at most, so we need to add controller_offset for the project with more than four sensors to reuse the same register settings. Signed-off-by: Michael Kao <michael.kao@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: mediatek: add calibration itemMichael Kao
Add calibration item in thermal_data to support the project with different calibration coefficient. Signed-off-by: Michael Kao <michael.kao@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: mediatek: add common index of vts settings.Michael Kao
Each project has different number of vts settings. For the MT2701 just have to set three vts, but the original code flow add five unnecessary vts. Add common index of vts settings for scalablity, and reduce the setting of unnecessary vts. Signed-off-by: Michael Kao <michael.kao@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: mediatek: fix register index errorMichael Kao
The index of msr and adcpnp should match the sensor which belongs to the selected bank in the for loop. Fixes: b7cf0053738c ("thermal: Add Mediatek thermal driver for mt2701.") Signed-off-by: Michael Kao <michael.kao@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: qoriq: add multiple sensors supportYuantian Tang
The QorIQ Layerscape SoC has several thermal sensors but the current driver only supports one. Massage the code to be sensor oriented and allow the support for multiple sensors. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: broadcom: Add Stingray thermal driverPramod Kumar
Stingray SoC has six temperature sensor and those are configured, controlled and accessed to read temperature and update in DDR memory using m0 firmware. All six sensors has been given 4 bytes of memory in DDR to write temperature in millivolts. This thermal driver read temperature values from DDR because no direct access to sensors. Like this all temparature sensors are monitored and trips at critical temperature. If driver can't handle thermal runaways because of any unknown reason, then firmware in m0 Processor will handle. Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Vikram Prakash <vikram.prakash@broadcom.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: cpu_cooling: Clarify error messageAmit Kucheria
Make it clear that it is a failure if the cpufreq driver was unable to register as a cooling device. Makes it easier to find in logs and grepping for words like fail, err, warn. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: of-thermal: Print name of device node with errorAmit Kucheria
Make it easier to debug devicetree definition in case of errors. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-29thermal: cpu_cooling: Require thermal core to be compiled inAmit Kucheria
The CPU cooling driver (cpu_cooling.c) allows the platform's cpufreq driver to register as a cooling device and cool down the platform by throttling the CPU frequency. In order to be able to auto-register a cpufreq driver as a cooling device from the cpufreq core, we need access to code inside cpu_cooling.c which, in turn, accesses code inside thermal core. CPU_FREQ is a bool while THERMAL is tristate. In some configurations (e.g. allmodconfig), CONFIG_THERMAL ends up as a module while CONFIG_CPU_FREQ is compiled in. This leads to following error: drivers/cpufreq/cpufreq.o: In function `cpufreq_offline': cpufreq.c:(.text+0x407c): undefined reference to `cpufreq_cooling_unregister' drivers/cpufreq/cpufreq.o: In function `cpufreq_online': cpufreq.c:(.text+0x70c0): undefined reference to `of_cpufreq_cooling_register' Given that platforms using CPU_THERMAL usually want it compiled-in so it is available early in boot, make CPU_THERMAL depend on THERMAL being compiled-in instead of allowing it to be a module. As a result of this change, get rid of the ugly (!CPU_THERMAL || THERMAL) dependency in all cpufreq drivers using CPU_THERMAL. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-23Merge branch 'for-rc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management fixes from Zhang Rui: - Fix a race condition that sysfs could be accessed before necessary initialization in int340x thermal driver. (Aaron Hill) - Fix a NULL vs IS_ERR() check in int340x thermal driver. (Dan Carpenter) * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: drivers: thermal: int340x_thermal: Fix sysfs race condition thermal: int340x_thermal: Fix a NULL vs IS_ERR() check
2019-01-18drivers: thermal: int340x_thermal: Fix sysfs race conditionAaron Hill
Changes since V1: * Use dev_info instead of printk * Use dev_warn instead of BUG_ON Previously, sysfs_create_group was called before all initialization had fully run - specifically, before pci_set_drvdata was called. Since the sysctl group is visible to userspace as soon as sysfs_create_group returns, a small window of time existed during which a process could read from an uninitialized/partially-initialized device. This commit moves the creation of the sysctl group to after all initialized is completed. This ensures that it's impossible for userspace to read from a sysctl file before initialization has fully completed. To catch any future regressions, I've added a check to ensure that proc_thermal_emum_mode is never PROC_THERMAL_NONE when a process tries to read from a sysctl file. Previously, the aforementioned race condition could result in the 'else' branch running while PROC_THERMAL_NONE was set, leading to a null pointer deference. Signed-off-by: Aaron Hill <aa1ronham@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-01-15drivers: thermal: int340x_thermal: Make PCI dependency explicitSinan Kaya
After commit 5d32a66541c4 (PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set) dependencies on CONFIG_PCI that previously were satisfied implicitly through dependencies on CONFIG_ACPI have to be specified directly. IOSF_CORE depends on PCI. For this reason, add a direct dependency on CONFIG_PCI. Fixes: 5d32a66541c46 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set") Signed-off-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-10thermal: int340x_thermal: Fix a NULL vs IS_ERR() checkDan Carpenter
The intel_soc_dts_iosf_init() function doesn't return NULL, it returns error pointers. Fixes: 4d0dd6c1576b ("Thermal/int340x/processor_thermal: Enable auxiliary DTS for Braswell") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-01-05Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Add locking for cooling device sysfs attribute in case the cooling device state is changed by userspace and thermal framework simultaneously. (Thara Gopinath) - Fix a problem that passive cooling is reset improperly after system suspend/resume. (Wei Wang) - Cleanup the driver/thermal/ directory by moving intel and qcom platform specific drivers to platform specific sub-directories. (Amit Kucheria) - Some trivial cleanups. (Lukasz Luba, Wolfram Sang) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal/intel: fixup for Kconfig string parsing tightening up drivers: thermal: Move QCOM_SPMI_TEMP_ALARM into the qcom subdir drivers: thermal: Move various drivers for intel platforms into a subdir thermal: Fix locking in cooling device sysfs update cur_state Thermal: do not clear passive state during system sleep thermal: zx2967_thermal: simplify getting .driver_data thermal: st: st_thermal: simplify getting .driver_data thermal: spear_thermal: simplify getting .driver_data thermal: rockchip_thermal: simplify getting .driver_data thermal: int340x_thermal: int3400_thermal: simplify getting .driver_data thermal: remove unused function parameter
2019-01-05Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal SoC updates from Eduardo Valentin: - Tegra DT binding documentation for Tegra194 - Armada now supports ap806 and cp110 - RCAR thermal now supports R8A774C0 and R8A77990 - Fixes on thermal_hwmon, IMX, generic-ADC, ST, RCAR, Broadcom, Uniphier, QCOM, Tegra, PowerClamp, and Armada thermal drivers. * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (22 commits) thermal: generic-adc: Fix adc to temp interpolation thermal: rcar_thermal: add R8A77990 support dt-bindings: thermal: rcar-thermal: add R8A77990 support thermal: rcar_thermal: add R8A774C0 support dt-bindings: thermal: rcar-thermal: add R8A774C0 support dt-bindings: cp110: document the thermal interrupt capabilities dt-bindings: ap806: document the thermal interrupt capabilities MAINTAINERS: thermal: add entry for Marvell MVEBU thermal driver thermal: armada: add overheat interrupt support thermal: st: fix Makefile typo thermal: uniphier: Convert to SPDX identifier thermal/intel_powerclamp: Change to use DEFINE_SHOW_ATTRIBUTE macro thermal: tegra: soctherm: Change to use DEFINE_SHOW_ATTRIBUTE macro dt-bindings: thermal: tegra-bpmp: Add Tegra194 support thermal: imx: save one condition block for normal case of nvmem initialization thermal: imx: fix for dependency on cpu-freq thermal: tsens: qcom: do not create duplicate regmap debugfs entries thermal: armada: Use PTR_ERR_OR_ZERO in armada_thermal_probe_legacy() dt-bindings: thermal: rcar-gen3-thermal: All variants use 3 interrupts thermal: broadcom: use devm_thermal_zone_of_sensor_register ...
2019-01-03thermal/intel: fixup for Kconfig string parsing tightening upStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2019-01-02thermal: generic-adc: Fix adc to temp interpolationBjorn Andersson
First correct the edge case to return the last element if we're outside the range, rather than at the last element, so that interpolation is not omitted for points between the two last entries in the table. Then correct the formula to perform linear interpolation based the two points surrounding the read ADC value. The indices for temp are kept as "hi" and "lo" to pair with the adc indices, but there's no requirement that the temperature is provided in descendent order. mult_frac() is used to prevent issues with overflowing the int. Cc: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: rcar_thermal: add R8A77990 supportYoshihiro Kaneko
Add support for R-Car E3 (R8A77990) thermal support. Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: rcar_thermal: add R8A774C0 supportFabrizio Castro
Add thermal support for the RZ/G2E SoC (a.k.a. R8A774C0). Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: armada: add overheat interrupt supportMiquel Raynal
The IP can manage to trigger interrupts on overheat situation from all the sensors. However, the interrupt source changes along with the last selected source (ie. the last read sensor), which is an inconsistent behavior. Avoid possible glitches by always selecting back only one channel which will then be referenced as the "overheat_sensor" (arbitrarily: the first in the DT which has a critical trip point filled in). It is possible that the scan of all thermal zone nodes did not bring a critical trip point from which the overheat interrupt could be configured. In this case just complain but do not fail the probe. Also disable sensor switch during overheat situations because changing the channel while the system is too hot could clear the overheat state by changing the source while the temperature is still very high. Even if the overheat state is not declared, overheat interrupt must be cleared by reading the DFX interrupt cause _after_ the temperature has fallen down to the low threshold, otherwise future possible interrupts would not be served. A work polls the corresponding register until the overheat flag gets cleared in this case. Suggested-by: David Sniatkiwicz <davidsn@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: st: fix Makefile typoArnd Bergmann
When STM32_THERMAL is enabled, this overrides all previously enabled files in the same directory, as seen from this link failure: ERROR: "st_thermal_pm_ops" [drivers/thermal/st/st_thermal_syscfg.ko] undefined! ERROR: "st_thermal_register" [drivers/thermal/st/st_thermal_syscfg.ko] undefined! ERROR: "st_thermal_unregister" [drivers/thermal/st/st_thermal_syscfg.ko] undefined! The correct syntax in Makefile requires using += instead of :=. Fixes: 1d6931556073 ("thermal: add stm32 thermal driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: uniphier: Convert to SPDX identifierKunihiko Hayashi
This converts license boilerplate to SPDX identifier, and removes unnecessary lines. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal/intel_powerclamp: Change to use DEFINE_SHOW_ATTRIBUTE macroYangtao Li
Use macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: tegra: soctherm: Change to use DEFINE_SHOW_ATTRIBUTE macroYangtao Li
Use macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: imx: save one condition block for normal case of nvmem initializationAnson Huang
Put return value checks of calling imx_init_from_nvmem_cells() into one block to save one condition block for normal case. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: imx: fix for dependency on cpu-freqAnson Huang
The thermal driver is a standalone driver for monitoring SoC temperature by enabling thermal sensor, so it can be enabled even when CONFIG_CPU_FREQ is NOT set. So remove the dependency with CPU_THERMAL. Introduce dummy function of legacy cooling register/unregister to make thermal driver probe successfully when CONFIG_CPU_FREQ is NOT set. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: tsens: qcom: do not create duplicate regmap debugfs entriesSrinivas Kandagatla
Regmap would use device name to create debugfs entries. If the device has multiple regmaps it is recommended to use name field in regmap_config. Fix this by providing name to the regmap configs correctly. Without this patch we would see below error on DB820c. qcom-tsens 4a9000.thermal-sensor: Failed to create 4a9000.thermal-sensor debugfs directory Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: armada: Use PTR_ERR_OR_ZERO in armada_thermal_probe_legacy()YueHaibing
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: broadcom: use devm_thermal_zone_of_sensor_registerJulia Lawall
Using devm_thermal_zone_of_sensor_register allows to simplify some error handling code, drop a label, and drop the remove function. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: bcm2835: enable hwmon explicitlyMatthias Brugger
By defaul of-based thermal driver do not enable hwmon. This patch does this explicitly, so that the temperature can be read through the common hwmon sysfs. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: hwmon: inline helpers when CONFIG_THERMAL_HWMON is not setEduardo Valentin
Avoid warnings like this: thermal_hwmon.h:29:1: warning: ‘thermal_remove_hwmon_sysfs’ defined but not used [-Wunused-function] thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz) Fixes: 0dd88793aacd ("thermal: hwmon: move hwmon support to single file") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-29Merge tag 'kconfig-v4.21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - support -y option for merge_config.sh to avoid downgrading =y to =m - remove S_OTHER symbol type, and touch include/config/*.h files correctly - fix file name and line number in lexer warnings - fix memory leak when EOF is encountered in quotation - resolve all shift/reduce conflicts of the parser - warn no new line at end of file - make 'source' statement more strict to take only string literal - rewrite the lexer and remove the keyword lookup table - convert to SPDX License Identifier - compile C files independently instead of including them from zconf.y - fix various warnings of gconfig - misc cleanups * tag 'kconfig-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kconfig: surround dbg_sym_flags with #ifdef DEBUG to fix gconf warning kconfig: split images.c out of qconf.cc/gconf.c to fix gconf warnings kconfig: add static qualifiers to fix gconf warnings kconfig: split the lexer out of zconf.y kconfig: split some C files out of zconf.y kconfig: convert to SPDX License Identifier kconfig: remove keyword lookup table entirely kconfig: update current_pos in the second lexer kconfig: switch to ASSIGN_VAL state in the second lexer kconfig: stop associating kconf_id with yylval kconfig: refactor end token rules kconfig: stop supporting '.' and '/' in unquoted words treewide: surround Kconfig file paths with double quotes microblaze: surround string default in Kconfig with double quotes kconfig: use T_WORD instead of T_VARIABLE for variables kconfig: use specific tokens instead of T_ASSIGN for assignments kconfig: refactor scanning and parsing "option" properties kconfig: use distinct tokens for type and default properties kconfig: remove redundant token defines kconfig: rename depends_list to comment_option_list ...
2018-12-22treewide: surround Kconfig file paths with double quotesMasahiro Yamada
The Kconfig lexer supports special characters such as '.' and '/' in the parameter context. In my understanding, the reason is just to support bare file paths in the source statement. I do not see a good reason to complicate Kconfig for the room of ambiguity. The majority of code already surrounds file paths with double quotes, and it makes sense since file paths are constant string literals. Make it treewide consistent now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-12-10thermal: stm32: Fix stm_thermal_read_factory_settingsDavid HERNANDEZ SANCHEZ
Adding brackets allows to multiply the register value, masked by TS1_RAMP_COEFF_MASK, by an ADJUST value properly and not to multiply ADJUST by register value and then mask the whole. Fixes: 1d693155 ("thermal: add stm32 thermal driver") Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: David Hernandez Sanchez <david.hernandezsanchez@st.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-10thermal: stm32: read factory settings inside stm_thermal_prepareDavid HERNANDEZ SANCHEZ
Calling stm_thermal_read_factory_settings before clocking internal peripheral causes bad register values and makes temperature computation wrong. Calling stm_thermal_read_factory_settings inside stm_thermal_prepare fixes this problem as internal peripheral is well clocked at this stage. Fixes: 1d693155 ("thermal: add stm32 thermal driver") Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: David Hernandez Sanchez <david.hernandezsanchez@st.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-10thermal/drivers/hisi: Fix number of sensors on hi3660Daniel Lezcano
Without this patch the thermal driver is broken on hi3660. The dual sensors support patchset was partially merged, unfortunately the dual thermal zones definition is not available in the DT yet, so when the driver tries to register all the sensors that fails. By reducing to 1 the number of sensors on the hi3660, we switch back to the previous functionnality. Fixes: 8c6c36846f11 (thermal/drivers/hisi: Add the dual clusters sensors for hi3660) Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-10thermal/drivers/hisi: Fix wrong platform_get_irq_byname()Daniel Lezcano
Without this patch, the thermal driver on hi6220 and hi3660 is broken. That is due because part of the posted patchset was merged but a small change in the DT was dropped. The hi6220 and hi3660 do not have an interrupt name in the DT, so finding interrupt by name fails. Fix this by returning back to the platform_get_irq() function call. Fixes: 2cffaeff083f (thermal/drivers/hisi: Use platform_get_irq_byname) Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-07Merge branches 'for-rc' and 'thermal-core' into nextZhang Rui
2018-12-07drivers: thermal: Move QCOM_SPMI_TEMP_ALARM into the qcom subdirAmit Kucheria
This cleans up the directory a bit allowing just one place to look for thermal related drivers for QCOM platforms instead of being scattered in the root directory and the qcom/ subdirectory. Compile-tested with ARCH=arm64 defconfig and the driver explicitly enabled with menuconfig. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-12-07drivers: thermal: Move various drivers for intel platforms into a subdirAmit Kucheria
This cleans up the directory a bit, now that we have several other platforms using platform-specific sub-directories. Compile-tested with ARCH=x86 defconfig and the drivers explicitly enabled with menuconfig. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-12-05thermal: broadcom: constify thermal_zone_of_device_ops structureJulia Lawall
The thermal_zone_of_device_ops structure can be const as it is only passed as the last argument of thermal_zone_of_sensor_register and the corresponding parameter is declared as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>