summaryrefslogtreecommitdiff
path: root/drivers/thermal
AgeCommit message (Collapse)Author
2019-02-05thermal: cpu_cooling: Clarify error messageAmit Kucheria
Make it clear that it is a failure if the cpufreq driver was unable to register as a cooling device. Makes it easier to find in logs and grepping for words like fail, err, warn. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: of-thermal: Print name of device node with errorAmit Kucheria
Make it easier to debug devicetree definition in case of errors. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-23Merge branch 'for-rc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management fixes from Zhang Rui: - Fix a race condition that sysfs could be accessed before necessary initialization in int340x thermal driver. (Aaron Hill) - Fix a NULL vs IS_ERR() check in int340x thermal driver. (Dan Carpenter) * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: drivers: thermal: int340x_thermal: Fix sysfs race condition thermal: int340x_thermal: Fix a NULL vs IS_ERR() check
2019-01-18drivers: thermal: int340x_thermal: Fix sysfs race conditionAaron Hill
Changes since V1: * Use dev_info instead of printk * Use dev_warn instead of BUG_ON Previously, sysfs_create_group was called before all initialization had fully run - specifically, before pci_set_drvdata was called. Since the sysctl group is visible to userspace as soon as sysfs_create_group returns, a small window of time existed during which a process could read from an uninitialized/partially-initialized device. This commit moves the creation of the sysctl group to after all initialized is completed. This ensures that it's impossible for userspace to read from a sysctl file before initialization has fully completed. To catch any future regressions, I've added a check to ensure that proc_thermal_emum_mode is never PROC_THERMAL_NONE when a process tries to read from a sysctl file. Previously, the aforementioned race condition could result in the 'else' branch running while PROC_THERMAL_NONE was set, leading to a null pointer deference. Signed-off-by: Aaron Hill <aa1ronham@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-01-15drivers: thermal: int340x_thermal: Make PCI dependency explicitSinan Kaya
After commit 5d32a66541c4 (PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set) dependencies on CONFIG_PCI that previously were satisfied implicitly through dependencies on CONFIG_ACPI have to be specified directly. IOSF_CORE depends on PCI. For this reason, add a direct dependency on CONFIG_PCI. Fixes: 5d32a66541c46 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set") Signed-off-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-10thermal: int340x_thermal: Fix a NULL vs IS_ERR() checkDan Carpenter
The intel_soc_dts_iosf_init() function doesn't return NULL, it returns error pointers. Fixes: 4d0dd6c1576b ("Thermal/int340x/processor_thermal: Enable auxiliary DTS for Braswell") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-01-05Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Add locking for cooling device sysfs attribute in case the cooling device state is changed by userspace and thermal framework simultaneously. (Thara Gopinath) - Fix a problem that passive cooling is reset improperly after system suspend/resume. (Wei Wang) - Cleanup the driver/thermal/ directory by moving intel and qcom platform specific drivers to platform specific sub-directories. (Amit Kucheria) - Some trivial cleanups. (Lukasz Luba, Wolfram Sang) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal/intel: fixup for Kconfig string parsing tightening up drivers: thermal: Move QCOM_SPMI_TEMP_ALARM into the qcom subdir drivers: thermal: Move various drivers for intel platforms into a subdir thermal: Fix locking in cooling device sysfs update cur_state Thermal: do not clear passive state during system sleep thermal: zx2967_thermal: simplify getting .driver_data thermal: st: st_thermal: simplify getting .driver_data thermal: spear_thermal: simplify getting .driver_data thermal: rockchip_thermal: simplify getting .driver_data thermal: int340x_thermal: int3400_thermal: simplify getting .driver_data thermal: remove unused function parameter
2019-01-05Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal SoC updates from Eduardo Valentin: - Tegra DT binding documentation for Tegra194 - Armada now supports ap806 and cp110 - RCAR thermal now supports R8A774C0 and R8A77990 - Fixes on thermal_hwmon, IMX, generic-ADC, ST, RCAR, Broadcom, Uniphier, QCOM, Tegra, PowerClamp, and Armada thermal drivers. * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (22 commits) thermal: generic-adc: Fix adc to temp interpolation thermal: rcar_thermal: add R8A77990 support dt-bindings: thermal: rcar-thermal: add R8A77990 support thermal: rcar_thermal: add R8A774C0 support dt-bindings: thermal: rcar-thermal: add R8A774C0 support dt-bindings: cp110: document the thermal interrupt capabilities dt-bindings: ap806: document the thermal interrupt capabilities MAINTAINERS: thermal: add entry for Marvell MVEBU thermal driver thermal: armada: add overheat interrupt support thermal: st: fix Makefile typo thermal: uniphier: Convert to SPDX identifier thermal/intel_powerclamp: Change to use DEFINE_SHOW_ATTRIBUTE macro thermal: tegra: soctherm: Change to use DEFINE_SHOW_ATTRIBUTE macro dt-bindings: thermal: tegra-bpmp: Add Tegra194 support thermal: imx: save one condition block for normal case of nvmem initialization thermal: imx: fix for dependency on cpu-freq thermal: tsens: qcom: do not create duplicate regmap debugfs entries thermal: armada: Use PTR_ERR_OR_ZERO in armada_thermal_probe_legacy() dt-bindings: thermal: rcar-gen3-thermal: All variants use 3 interrupts thermal: broadcom: use devm_thermal_zone_of_sensor_register ...
2019-01-03thermal/intel: fixup for Kconfig string parsing tightening upStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2019-01-02thermal: generic-adc: Fix adc to temp interpolationBjorn Andersson
First correct the edge case to return the last element if we're outside the range, rather than at the last element, so that interpolation is not omitted for points between the two last entries in the table. Then correct the formula to perform linear interpolation based the two points surrounding the read ADC value. The indices for temp are kept as "hi" and "lo" to pair with the adc indices, but there's no requirement that the temperature is provided in descendent order. mult_frac() is used to prevent issues with overflowing the int. Cc: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: rcar_thermal: add R8A77990 supportYoshihiro Kaneko
Add support for R-Car E3 (R8A77990) thermal support. Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: rcar_thermal: add R8A774C0 supportFabrizio Castro
Add thermal support for the RZ/G2E SoC (a.k.a. R8A774C0). Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: armada: add overheat interrupt supportMiquel Raynal
The IP can manage to trigger interrupts on overheat situation from all the sensors. However, the interrupt source changes along with the last selected source (ie. the last read sensor), which is an inconsistent behavior. Avoid possible glitches by always selecting back only one channel which will then be referenced as the "overheat_sensor" (arbitrarily: the first in the DT which has a critical trip point filled in). It is possible that the scan of all thermal zone nodes did not bring a critical trip point from which the overheat interrupt could be configured. In this case just complain but do not fail the probe. Also disable sensor switch during overheat situations because changing the channel while the system is too hot could clear the overheat state by changing the source while the temperature is still very high. Even if the overheat state is not declared, overheat interrupt must be cleared by reading the DFX interrupt cause _after_ the temperature has fallen down to the low threshold, otherwise future possible interrupts would not be served. A work polls the corresponding register until the overheat flag gets cleared in this case. Suggested-by: David Sniatkiwicz <davidsn@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: st: fix Makefile typoArnd Bergmann
When STM32_THERMAL is enabled, this overrides all previously enabled files in the same directory, as seen from this link failure: ERROR: "st_thermal_pm_ops" [drivers/thermal/st/st_thermal_syscfg.ko] undefined! ERROR: "st_thermal_register" [drivers/thermal/st/st_thermal_syscfg.ko] undefined! ERROR: "st_thermal_unregister" [drivers/thermal/st/st_thermal_syscfg.ko] undefined! The correct syntax in Makefile requires using += instead of :=. Fixes: 1d6931556073 ("thermal: add stm32 thermal driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: uniphier: Convert to SPDX identifierKunihiko Hayashi
This converts license boilerplate to SPDX identifier, and removes unnecessary lines. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal/intel_powerclamp: Change to use DEFINE_SHOW_ATTRIBUTE macroYangtao Li
Use macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: tegra: soctherm: Change to use DEFINE_SHOW_ATTRIBUTE macroYangtao Li
Use macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: imx: save one condition block for normal case of nvmem initializationAnson Huang
Put return value checks of calling imx_init_from_nvmem_cells() into one block to save one condition block for normal case. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: imx: fix for dependency on cpu-freqAnson Huang
The thermal driver is a standalone driver for monitoring SoC temperature by enabling thermal sensor, so it can be enabled even when CONFIG_CPU_FREQ is NOT set. So remove the dependency with CPU_THERMAL. Introduce dummy function of legacy cooling register/unregister to make thermal driver probe successfully when CONFIG_CPU_FREQ is NOT set. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: tsens: qcom: do not create duplicate regmap debugfs entriesSrinivas Kandagatla
Regmap would use device name to create debugfs entries. If the device has multiple regmaps it is recommended to use name field in regmap_config. Fix this by providing name to the regmap configs correctly. Without this patch we would see below error on DB820c. qcom-tsens 4a9000.thermal-sensor: Failed to create 4a9000.thermal-sensor debugfs directory Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: armada: Use PTR_ERR_OR_ZERO in armada_thermal_probe_legacy()YueHaibing
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: broadcom: use devm_thermal_zone_of_sensor_registerJulia Lawall
Using devm_thermal_zone_of_sensor_register allows to simplify some error handling code, drop a label, and drop the remove function. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: bcm2835: enable hwmon explicitlyMatthias Brugger
By defaul of-based thermal driver do not enable hwmon. This patch does this explicitly, so that the temperature can be read through the common hwmon sysfs. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: hwmon: inline helpers when CONFIG_THERMAL_HWMON is not setEduardo Valentin
Avoid warnings like this: thermal_hwmon.h:29:1: warning: ‘thermal_remove_hwmon_sysfs’ defined but not used [-Wunused-function] thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz) Fixes: 0dd88793aacd ("thermal: hwmon: move hwmon support to single file") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-29Merge tag 'kconfig-v4.21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - support -y option for merge_config.sh to avoid downgrading =y to =m - remove S_OTHER symbol type, and touch include/config/*.h files correctly - fix file name and line number in lexer warnings - fix memory leak when EOF is encountered in quotation - resolve all shift/reduce conflicts of the parser - warn no new line at end of file - make 'source' statement more strict to take only string literal - rewrite the lexer and remove the keyword lookup table - convert to SPDX License Identifier - compile C files independently instead of including them from zconf.y - fix various warnings of gconfig - misc cleanups * tag 'kconfig-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kconfig: surround dbg_sym_flags with #ifdef DEBUG to fix gconf warning kconfig: split images.c out of qconf.cc/gconf.c to fix gconf warnings kconfig: add static qualifiers to fix gconf warnings kconfig: split the lexer out of zconf.y kconfig: split some C files out of zconf.y kconfig: convert to SPDX License Identifier kconfig: remove keyword lookup table entirely kconfig: update current_pos in the second lexer kconfig: switch to ASSIGN_VAL state in the second lexer kconfig: stop associating kconf_id with yylval kconfig: refactor end token rules kconfig: stop supporting '.' and '/' in unquoted words treewide: surround Kconfig file paths with double quotes microblaze: surround string default in Kconfig with double quotes kconfig: use T_WORD instead of T_VARIABLE for variables kconfig: use specific tokens instead of T_ASSIGN for assignments kconfig: refactor scanning and parsing "option" properties kconfig: use distinct tokens for type and default properties kconfig: remove redundant token defines kconfig: rename depends_list to comment_option_list ...
2018-12-22treewide: surround Kconfig file paths with double quotesMasahiro Yamada
The Kconfig lexer supports special characters such as '.' and '/' in the parameter context. In my understanding, the reason is just to support bare file paths in the source statement. I do not see a good reason to complicate Kconfig for the room of ambiguity. The majority of code already surrounds file paths with double quotes, and it makes sense since file paths are constant string literals. Make it treewide consistent now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-12-10thermal: stm32: Fix stm_thermal_read_factory_settingsDavid HERNANDEZ SANCHEZ
Adding brackets allows to multiply the register value, masked by TS1_RAMP_COEFF_MASK, by an ADJUST value properly and not to multiply ADJUST by register value and then mask the whole. Fixes: 1d693155 ("thermal: add stm32 thermal driver") Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: David Hernandez Sanchez <david.hernandezsanchez@st.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-10thermal: stm32: read factory settings inside stm_thermal_prepareDavid HERNANDEZ SANCHEZ
Calling stm_thermal_read_factory_settings before clocking internal peripheral causes bad register values and makes temperature computation wrong. Calling stm_thermal_read_factory_settings inside stm_thermal_prepare fixes this problem as internal peripheral is well clocked at this stage. Fixes: 1d693155 ("thermal: add stm32 thermal driver") Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: David Hernandez Sanchez <david.hernandezsanchez@st.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-10thermal/drivers/hisi: Fix number of sensors on hi3660Daniel Lezcano
Without this patch the thermal driver is broken on hi3660. The dual sensors support patchset was partially merged, unfortunately the dual thermal zones definition is not available in the DT yet, so when the driver tries to register all the sensors that fails. By reducing to 1 the number of sensors on the hi3660, we switch back to the previous functionnality. Fixes: 8c6c36846f11 (thermal/drivers/hisi: Add the dual clusters sensors for hi3660) Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-10thermal/drivers/hisi: Fix wrong platform_get_irq_byname()Daniel Lezcano
Without this patch, the thermal driver on hi6220 and hi3660 is broken. That is due because part of the posted patchset was merged but a small change in the DT was dropped. The hi6220 and hi3660 do not have an interrupt name in the DT, so finding interrupt by name fails. Fix this by returning back to the platform_get_irq() function call. Fixes: 2cffaeff083f (thermal/drivers/hisi: Use platform_get_irq_byname) Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-07Merge branches 'for-rc' and 'thermal-core' into nextZhang Rui
2018-12-07drivers: thermal: Move QCOM_SPMI_TEMP_ALARM into the qcom subdirAmit Kucheria
This cleans up the directory a bit allowing just one place to look for thermal related drivers for QCOM platforms instead of being scattered in the root directory and the qcom/ subdirectory. Compile-tested with ARCH=arm64 defconfig and the driver explicitly enabled with menuconfig. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-12-07drivers: thermal: Move various drivers for intel platforms into a subdirAmit Kucheria
This cleans up the directory a bit, now that we have several other platforms using platform-specific sub-directories. Compile-tested with ARCH=x86 defconfig and the drivers explicitly enabled with menuconfig. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-12-05thermal: broadcom: constify thermal_zone_of_device_ops structureJulia Lawall
The thermal_zone_of_device_ops structure can be const as it is only passed as the last argument of thermal_zone_of_sensor_register and the corresponding parameter is declared as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-05thermal: armada: constify thermal_zone_of_device_ops structureJulia Lawall
The thermal_zone_of_device_ops structure can be const as it is only passed as the last argument of devm_thermal_zone_of_sensor_register and the corresponding parameter is declared as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-04thermal: bcm2835: Switch to SPDX identifierStefan Wahren
Adopt the SPDX license identifier headers to ease license compliance management. Cc: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-04thermal: armada: fix legacy resource fixupRussell King
When the armada thermal module is inserted, removed and then reinserted, the system panics as per the messages below. The reason is that "edit" a live resource in the resource tree twice, and end up with it pointing to some other hardware. Editing live resources (resources that are part of the registered resource tree) is not permissible - the resource tree is an ordered set of resources, sorted by start address, and when a new resource is inserted, it is validated that it (a) fits within its parent resource and (b) does not overlap a neighbouring resource. Get rid of this resource editing. We can instead adjust the return value from ioremap() as ioremap() deals with the creation of page- based mappings - provided the adjustment does not cross a page boundary. SError Interrupt on CPU1, code 0xbf000000 -- SError CPU: 1 PID: 2749 Comm: modprobe Not tainted 4.19.0+ #175 Hardware name: Marvell 8040 MACCHIATOBin Double shot (DT) pstate: 20400085 (nzCv daIf +PAN -UAO) pc : regmap_mmio_read+0x3c/0x60 lr : regmap_mmio_read+0x3c/0x60 sp : ffffff800d453900 x29: ffffff800d453900 x28: ffffff800096a1d0 x27: 0000000000000100 x26: ffffff80009696d8 x25: ffffff8000969000 x24: ffffffc13a588918 x23: ffffffc13a9a28a8 x22: ffffff800d4539dc x21: 0000000000000084 x20: ffffff800d4539dc x19: ffffffc13a5d5480 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000030 x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f x9 : 0000000000000000 x8 : ffffffc13a5d5a80 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffffff800851be70 x2 : ffffff800851bd60 x1 : ffffff800d492ff8 x0 : 0000000000000000 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 1 PID: 2749 Comm: modprobe Not tainted 4.19.0+ #175 Hardware name: Marvell 8040 MACCHIATOBin Double shot (DT) Call trace: dump_backtrace+0x0/0x158 show_stack+0x14/0x1c dump_stack+0x90/0xb0 panic+0x128/0x298 print_tainted+0x0/0xa8 arm64_serror_panic+0x74/0x80 do_serror+0x5c/0xb8 el1_error+0xb4/0x144 regmap_mmio_read+0x3c/0x60 _regmap_bus_reg_read+0x18/0x20 _regmap_read+0x64/0x180 regmap_read+0x44/0x6c armada_ap806_init+0x24/0x5c [armada_thermal] armada_thermal_probe+0x2c8/0x37c [armada_thermal] platform_drv_probe+0x4c/0xb0 really_probe+0x21c/0x2b4 driver_probe_device+0x58/0xfc __driver_attach+0xd4/0xd8 bus_for_each_dev+0x50/0xa0 driver_attach+0x20/0x28 bus_add_driver+0x1c4/0x228 driver_register+0x6c/0x124 __platform_driver_register+0x4c/0x54 armada_thermal_driver_init+0x20/0x1000 [armada_thermal] do_one_initcall+0x30/0x204 do_init_module+0x5c/0x1d4 load_module+0x1a88/0x212c __se_sys_finit_module+0xa0/0xac __arm64_sys_finit_module+0x1c/0x24 el0_svc_common+0x94/0xf0 el0_svc_handler+0x24/0x80 el0_svc+0x8/0x3c0 SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x0,21806000 Memory Limit: none Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Tested-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-04thermal: armada: fix legacy validity test senseRussell King
Commit 8c0e64ac4075 ("thermal: armada: get rid of the ->is_valid() pointer") removed the unnecessary indirection through a function pointer, but in doing so, also removed the negation operator too: - if (priv->data->is_valid && !priv->data->is_valid(priv)) { + if (armada_is_valid(priv)) { which results in: armada_thermal f06f808c.thermal: Temperature sensor reading not valid armada_thermal f2400078.thermal: Temperature sensor reading not valid armada_thermal f4400078.thermal: Temperature sensor reading not valid at boot, or whenever the "temp" sysfs file is read. Replace the negation operator. Fixes: 8c0e64ac4075 ("thermal: armada: get rid of the ->is_valid() pointer") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-11-30thermal: Fix locking in cooling device sysfs update cur_stateThara Gopinath
Sysfs interface to update cooling device cur_state does not currently holding cooling device lock sometimes leading to stale values in cur_state if getting updated simultanelously from user space and thermal framework. Adding the proper locking code fixes this issue. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-11-30Thermal: do not clear passive state during system sleepWei Wang
commit ff140fea847e ("Thermal: handle thermal zone device properly during system sleep") added PM hook to call thermal zone reset during sleep. However resetting thermal zone will also clear the passive state and thus cancel the polling queue which leads the passive cooling device state not being cleared properly after sleep. thermal_pm_notify => thermal_zone_device_reset set passive to 0 thermal_zone_trip_update will skip update passive as `old_target == instance->target'. monitor_thermal_zone => thermal_zone_device_set_polling will cancel tz->poll_queue, so the cooling device state will not be changed afterwards. Reported-by: Kame Wang <kamewang@google.com> Signed-off-by: Wei Wang <wvw@google.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-11-30thermal: zx2967_thermal: simplify getting .driver_dataWolfram Sang
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-11-30thermal: st: st_thermal: simplify getting .driver_dataWolfram Sang
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-11-30thermal: spear_thermal: simplify getting .driver_dataWolfram Sang
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-11-30thermal: rockchip_thermal: simplify getting .driver_dataWolfram Sang
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-11-30thermal: int340x_thermal: int3400_thermal: simplify getting .driver_dataWolfram Sang
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-11-30thermal: remove unused function parameterLukasz Luba
Clean unused parameter from internal framework function. Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-10-31Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Fix a use-after-free issue when unregistering a thermal cooling device (Dmitry Osipenko) - use power_efficient_wq for thermal worker to save more power (Jeson Gao) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: core: using power_efficient_wq for thermal worker thermal: core: Fix use-after-free in thermal_cooling_device_destroy_sysfs
2018-10-26Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal SoC updates from Eduardo Valentin: "Several new things coming up. Specifics: - Rework of tsens and hisi thermal drivers - OF-thermal now allows sharing multiple cooling devices on maps - Added support for r8a7744 and R8A77970 on rcar thermal driver - Added support for r8a774a1 on rcar_gen3 thermal driver - New thermal driver stm32 - Fixes on multiple thermal drivers: of-thermal, imx, qoriq, armada, qcom-spmi, rcar, da9062/61" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (41 commits) thermal: da9062/61: Prevent hardware access during system suspend thermal: rcar_thermal: Prevent doing work after unbind thermal: rcar_thermal: Prevent hardware access during system suspend thermal: rcar_gen3_thermal: add R8A77980 support dt-bindings: thermal: rcar-gen3-thermal: document R8A77980 bindings thermal: add stm32 thermal driver dt-bindings: stm32-thermal: add binding documentation thermal: rcar_thermal: add R8A77970 support dt-bindings: thermal: rcar-thermal: document R8A77970 bindings thermal: rcar_thermal: fix duplicate IRQ request dt-bindings: thermal: rcar: Add device tree support for r8a7744 thermal/drivers/hisi: Add the dual clusters sensors for hi3660 thermal/drivers/hisi: Add more sensors channel thermal/drivers/hisi: Remove pointless irq field thermal/drivers/hisi: Use platform_get_irq_byname thermal/drivers/hisi: Replace macro name with relevant sensor location thermal/drivers/hisi: Add multiple sensors support thermal/drivers/hisi: Prepare to support multiple sensors thermal/drivers/hisi: Factor out the probe functions thermal/drivers/hisi: Set the thermal zone private data to the sensor pointer ...
2018-10-25thermal: da9062/61: Prevent hardware access during system suspendGeert Uytterhoeven
The workqueue used for monitoring the hardware may run while the device is already suspended. Fix this by using the freezable system workqueue instead, cfr. commit 51e20d0e3a60cf46 ("thermal: Prevent polling from happening during system suspend"). Fixes: 608567aac3206ae8 ("thermal: da9062/61: Thermal junction temperature monitoring driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-25thermal: rcar_thermal: Prevent doing work after unbindGeert Uytterhoeven
When testing bind/unbind on r8a7791/koelsch: WARNING: CPU: 1 PID: 697 at lib/debugobjects.c:329 debug_print_object+0x8c/0xb4 ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x10 This happens if the workqueue runs after the device has been unbound. Fix this by cancelling any queued work during remove. Fixes: e0a5172e9eec7f0d ("thermal: rcar: add interrupt support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>