| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal SoC updates from Eduardo Valentin:
"This is a really small pull in the midst of a lot of pending patches.
We are in the middle of restructuring how we are maintaining the
thermal subsystem, as per discussion in our last LPC. For now, I am
sending just some changes that were pending in my tree. Looking
forward to get a more streamlined process in the next merge window"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
thermal: db8500: Rewrite to be a pure OF sensor
thermal: db8500: Use dev helper variable
thermal: db8500: Finalize device tree conversion
thermal: thermal_mmio: remove some dead code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:
- Add Amit Kucheria as thermal subsystem Reviewer (Amit Kucheria)
- Fix a use after free bug when unregistering thermal zone devices (Ido
Schimmel)
- Fix thermal core framework to use put_device() when device_register()
fails (Yue Hu)
- Enable intel_pch_thermal and MMIO RAPL support for Intel Icelake
platform (Srinivas Pandruvada)
- Add clock operations in qorip thermal driver, for some platforms with
clock control like i.MX8MQ (Anson Huang)
- A couple of trivial fixes and cleanups for thermal core and different
soc thermal drivers (Amit Kucheria, Christophe JAILLET, Chuhong Yuan,
Fuqian Huang, Kelsey Skunberg, Nathan Huckleberry, Rishi Gupta,
Srinivas Kandagatla)
* 'for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
MAINTAINERS: Add Amit Kucheria as reviewer for thermal
thermal: Add some error messages
thermal: Fix use-after-free when unregistering thermal zone device
thermal/drivers/core: Use put_device() if device_register() fails
thermal_hwmon: Sanitize thermal_zone type
thermal: intel: Use dev_get_drvdata
thermal: intel: int3403: replace printk(KERN_WARN...) with pr_warn(...)
thermal: intel: int340x_thermal: Remove unnecessary acpi_has_method() uses
thermal: int340x: processor_thermal: Add Ice Lake support
drivers: thermal: qcom: tsens: Fix memory leak from qfprom read
thermal: tegra: Fix a typo
thermal: rcar_gen3_thermal: Replace devm_add_action() followed by failure action with devm_add_action_or_reset()
thermal: armada: Fix -Wshift-negative-value
dt-bindings: thermal: qoriq: Add optional clocks property
thermal: qoriq: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
thermal: qoriq: Use devm_platform_ioremap_resource() instead of of_iomap()
thermal: qoriq: Fix error path of calling qoriq_tmu_register_tmu_zone fail
thermal: qoriq: Add clock operations
drivers: thermal: processor_thermal_device: Export sysfs interface for TCC offset
|
|
This patch rewrites the DB8500 thermal sensor to be a
pure OF sensor, so that it can be used with thermal zones
defined in the device tree.
This driver was initially merged before we had generic
thermal zone device tree bindings, and now it gets
modernized to the way we do things these days.
The old driver depended on a set of trigger points
provided in the device tree or platform data to
interpolate the current temperature between trigger
points depending on whether the trend was rising or
falling. This was bad because the trigger points should
be used for defining temperature zone policies and
bind to cooling devices.
As the PRCMU (power reset control management unit) can
only issue IRQs when we pass temperature trigger points
upward or downward We instead define a number of
temperature points inside the driver ranging from
15 to 100 degrees celsius. The effect is that when
we register the device we quickly trigger 15, 20 ... up
to the room temperature in succession and then we
get continous event IRQs also under normal operating
conditions, and the temperature of the system is now
reported more accurately (+/- 2.5 degrees celsius)
while in the past the first trigger point was at 70
degrees and the average temperature was simply reported
as 35 degrees celsius (between 70 degrees and 0) until
we passed 70 degrees which didn't accurately represent
the temperature of the system.
As a result of dropping all the trigger points from the
driver and reusing the core DT thermal zone management
code we reduce the code footprint quite a bit.
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
The code gets easier to read like this.
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
At some point there was an attempt to convert the DB8500
thermal sensor to device tree: a probe path was added
and the device tree was augmented for the Snowball board.
The switchover was never completed: instead the thermal
devices came from from the PRCMU MFD device and the probe
on the Snowball was confused as another set of configuration
appeared from the device tree.
Move over to a device-tree only approach, as we fixed up
the device trees.
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
|
|
When registering a thermal zone device, we currently return -EINVAL in
four cases. This makes it a little hard to debug the real cause of the
failure.
Print some error messages to make it easier for developer to figure out
what happened.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
thermal_zone_device_unregister() cancels the delayed work that polls the
thermal zone, but it does not wait for it to finish. This is racy with
respect to the freeing of the thermal zone device, which can result in a
use-after-free [1].
Fix this by waiting for the delayed work to finish before freeing the
thermal zone device. Note that thermal_zone_device_set_polling() is
never invoked from an atomic context, so it is safe to call
cancel_delayed_work_sync() that can block.
[1]
[ +0.002221] ==================================================================
[ +0.000064] BUG: KASAN: use-after-free in __mutex_lock+0x1076/0x11c0
[ +0.000016] Read of size 8 at addr ffff8881e48e0450 by task kworker/1:0/17
[ +0.000023] CPU: 1 PID: 17 Comm: kworker/1:0 Not tainted 5.2.0-rc6-custom-02495-g8e73ca3be4af #1701
[ +0.000010] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016
[ +0.000016] Workqueue: events_freezable_power_ thermal_zone_device_check
[ +0.000012] Call Trace:
[ +0.000021] dump_stack+0xa9/0x10e
[ +0.000020] print_address_description.cold.2+0x9/0x25e
[ +0.000018] __kasan_report.cold.3+0x78/0x9d
[ +0.000016] kasan_report+0xe/0x20
[ +0.000016] __mutex_lock+0x1076/0x11c0
[ +0.000014] step_wise_throttle+0x72/0x150
[ +0.000018] handle_thermal_trip+0x167/0x760
[ +0.000019] thermal_zone_device_update+0x19e/0x5f0
[ +0.000019] process_one_work+0x969/0x16f0
[ +0.000017] worker_thread+0x91/0xc40
[ +0.000014] kthread+0x33d/0x400
[ +0.000015] ret_from_fork+0x3a/0x50
[ +0.000020] Allocated by task 1:
[ +0.000015] save_stack+0x19/0x80
[ +0.000015] __kasan_kmalloc.constprop.4+0xc1/0xd0
[ +0.000014] kmem_cache_alloc_trace+0x152/0x320
[ +0.000015] thermal_zone_device_register+0x1b4/0x13a0
[ +0.000015] mlxsw_thermal_init+0xc92/0x23d0
[ +0.000014] __mlxsw_core_bus_device_register+0x659/0x11b0
[ +0.000013] mlxsw_core_bus_device_register+0x3d/0x90
[ +0.000013] mlxsw_pci_probe+0x355/0x4b0
[ +0.000014] local_pci_probe+0xc3/0x150
[ +0.000013] pci_device_probe+0x280/0x410
[ +0.000013] really_probe+0x26a/0xbb0
[ +0.000013] driver_probe_device+0x208/0x2e0
[ +0.000013] device_driver_attach+0xfe/0x140
[ +0.000013] __driver_attach+0x110/0x310
[ +0.000013] bus_for_each_dev+0x14b/0x1d0
[ +0.000013] driver_register+0x1c0/0x400
[ +0.000015] mlxsw_sp_module_init+0x5d/0xd3
[ +0.000014] do_one_initcall+0x239/0x4dd
[ +0.000013] kernel_init_freeable+0x42b/0x4e8
[ +0.000012] kernel_init+0x11/0x18b
[ +0.000013] ret_from_fork+0x3a/0x50
[ +0.000015] Freed by task 581:
[ +0.000013] save_stack+0x19/0x80
[ +0.000014] __kasan_slab_free+0x125/0x170
[ +0.000013] kfree+0xf3/0x310
[ +0.000013] thermal_release+0xc7/0xf0
[ +0.000014] device_release+0x77/0x200
[ +0.000014] kobject_put+0x1a8/0x4c0
[ +0.000014] device_unregister+0x38/0xc0
[ +0.000014] thermal_zone_device_unregister+0x54e/0x6a0
[ +0.000014] mlxsw_thermal_fini+0x184/0x35a
[ +0.000014] mlxsw_core_bus_device_unregister+0x10a/0x640
[ +0.000013] mlxsw_devlink_core_bus_device_reload+0x92/0x210
[ +0.000015] devlink_nl_cmd_reload+0x113/0x1f0
[ +0.000014] genl_family_rcv_msg+0x700/0xee0
[ +0.000013] genl_rcv_msg+0xca/0x170
[ +0.000013] netlink_rcv_skb+0x137/0x3a0
[ +0.000012] genl_rcv+0x29/0x40
[ +0.000013] netlink_unicast+0x49b/0x660
[ +0.000013] netlink_sendmsg+0x755/0xc90
[ +0.000013] __sys_sendto+0x3de/0x430
[ +0.000013] __x64_sys_sendto+0xe2/0x1b0
[ +0.000013] do_syscall_64+0xa4/0x4d0
[ +0.000013] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ +0.000017] The buggy address belongs to the object at ffff8881e48e0008
which belongs to the cache kmalloc-2k of size 2048
[ +0.000012] The buggy address is located 1096 bytes inside of
2048-byte region [ffff8881e48e0008, ffff8881e48e0808)
[ +0.000007] The buggy address belongs to the page:
[ +0.000012] page:ffffea0007923800 refcount:1 mapcount:0 mapping:ffff88823680d0c0 index:0x0 compound_mapcount: 0
[ +0.000020] flags: 0x200000000010200(slab|head)
[ +0.000019] raw: 0200000000010200 ffffea0007682008 ffffea00076ab808 ffff88823680d0c0
[ +0.000016] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000
[ +0.000007] page dumped because: kasan: bad access detected
[ +0.000012] Memory state around the buggy address:
[ +0.000012] ffff8881e48e0300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000012] ffff8881e48e0380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000012] >ffff8881e48e0400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000008] ^
[ +0.000012] ffff8881e48e0480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000012] ffff8881e48e0500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ==================================================================
Fixes: b1569e99c795 ("ACPI: move thermal trip handling to generic thermal layer")
Reported-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Never directly free @dev after calling device_register(), even if it
returned an error! Always use put_device() to give up the reference
initialized. Clean up the rollback block also.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
When calling thermal_add_hwmon_sysfs(), the device type is sanitized by
replacing '-' with '_'. However tz->type remains unsanitized. Thus
calling thermal_hwmon_lookup_by_type() returns no device. And if there is
no device, thermal_remove_hwmon_sysfs() fails with "hwmon device lookup
failed!".
The result is unregisted hwmon devices in the sysfs.
Fixes: 409ef0bacacf ("thermal_hwmon: Sanitize attribute name passed to hwmon")
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Direct invocation of printk() is not preferred to emit logs.
This commit replaces printk(KERN_WARNING) with corresponding
pr_warn() function call.
Signed-off-by: Rishi Gupta <gupt21@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
acpi_evaluate_object() will already return in error if the method does not
exist. Checking if the method is absent before the acpi_evaluate_object()
call is not needed. Remove acpi_has_method() calls to avoid additional
work.
Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Add new PCI id for Ice lake processor thermal device. Also enabled
the RAPL mmio interface. The MMIO offsets match Skylake.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
The platform_get_resource() function doesn't return error pointers, it
returns NULL. The way this is normally done, is that we pass the NULL
resource to devm_ioremap_resource() and then check for errors from that.
See the comment in front of devm_ioremap_resource() for more details.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Talel Shenhar <talel@amazon.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
* pm-cpufreq: (36 commits)
cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist
cpufreq: qcom: Add support for qcs404 on nvmem driver
cpufreq: qcom: Refactor the driver to make it easier to extend
cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
Documentation: cpufreq: Update policy notifier documentation
cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events
sched/cpufreq: Align trace event behavior of fast switching
ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier
video: pxafb: Remove cpufreq policy notifier
video: sa1100fb: Remove cpufreq policy notifier
arch_topology: Use CPUFREQ_CREATE_POLICY instead of CPUFREQ_NOTIFY
cpufreq: powerpc_cbe: Switch to QoS requests for freq limits
cpufreq: powerpc: macintosh: Switch to QoS requests for freq limits
cpufreq: Print driver name if cpufreq_suspend() fails
cpufreq: mediatek: Add support for mt8183
cpufreq: mediatek: change to regulator_get_optional
cpufreq: imx-cpufreq-dt: Add i.MX8MN support
cpufreq: Use imx-cpufreq-dt for i.MX8MN's speed grading
...
|
|
The play_idle resolution is 1ms. The intel_powerclamp bases the idle
duration on jiffies. The idle injection API is also using msec based
duration but has no user yet.
Unfortunately, msec based time does not fit well when we want to
inject idle cycle precisely with shallow idle state.
In order to set the scene for the incoming idle injection user, move
the precision up to usec when calling play_idle.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
memory returned as part of nvmem_read via qfprom_read should be
freed by the consumer once done.
Existing code is not doing it so fix it.
Below memory leak detected by kmemleak
[<ffffff80088b7658>] kmemleak_alloc+0x50/0x84
[<ffffff80081df120>] __kmalloc+0xe8/0x168
[<ffffff80086db350>] nvmem_cell_read+0x30/0x80
[<ffffff8008632790>] qfprom_read+0x4c/0x7c
[<ffffff80086335a4>] calibrate_v1+0x34/0x204
[<ffffff8008632518>] tsens_probe+0x164/0x258
[<ffffff80084e0a1c>] platform_drv_probe+0x80/0xa0
[<ffffff80084de4f4>] really_probe+0x208/0x248
[<ffffff80084de2c4>] driver_probe_device+0x98/0xc0
[<ffffff80084dec54>] __device_attach_driver+0x9c/0xac
[<ffffff80084dca74>] bus_for_each_drv+0x60/0x8c
[<ffffff80084de634>] __device_attach+0x8c/0x100
[<ffffff80084de6c8>] device_initial_probe+0x20/0x28
[<ffffff80084dcbb8>] bus_probe_device+0x34/0x7c
[<ffffff80084deb08>] deferred_probe_work_func+0x6c/0x98
[<ffffff80080c3da8>] process_one_work+0x160/0x2f8
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
s/sochterm/soctherm/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
action with devm_add_action_or_reset()
devm_add_action_or_reset() is introduced as a helper function which
internally calls devm_add_action(). If devm_add_action() fails
then it will execute the action mentioned and return the error code.
This reduce source code size (avoid writing the action twice)
and reduce the likelyhood of bugs.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Clang produces the following warning
drivers/thermal/armada_thermal.c:270:33: warning: shifting a negative
signed value is undefined [-Wshift-negative-value]
1 warning reg &= ~CONTROL1_TSEN_AVG_MASK <<
CONTROL1_TSEN_AVG_SHIFT; generated
.
~~~~~~~~~~~~~~~~~~~~~~~ ^
CONTROL1_TSEN_AVG_SHIFT is defined to be zero.
Since shifting by zero does nothing this variable can be removed.
Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/532
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Use __maybe_unused for power management related functions
instead of #if CONFIG_PM_SLEEP to simply the code.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Use devm_platform_ioremap_resource() instead of of_iomap() to
save the iounmap() call in error handle path;
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
When registering tmu zone failed, the error path should be err_tmu
instead of err_iomap, as iounmap() needs to be called.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Some platforms like i.MX8MQ has clock control for this module,
need to add clock operations to make sure the driver is working
properly.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
offset
This change exports an interface to read tcc offset and allow writing if
the platform is not locked.
Refer to Intel SDM for details on the MSR: MSR_TEMPERATURE_TARGET.
Here TCC Activation Offset (R/W) bits allow temperature offset in degrees
in relation to TjMAX.
This change will be useful for improving performance from user space for
some platforms, if the current offset is not optimal.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Benjamin Berg <bberg@redhat.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
The cpufreq core now takes the min/max frequency constraints via QoS
requests and the CPUFREQ_ADJUST notifier shall get removed later on.
Switch over to using the QoS request for maximum frequency constraint
for cpu_cooling driver.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Passing 0 to cpuhp_remove_state() triggers the BUG_ON() in
__cpuhp_remove_state_cpuslocked() and the argument passed to
powercap_unregister_control_type() is expected to be a valid
pointer, so avoid calling these functions with incorrect
arguments from proc_thermal_rapl_remove().
Fixes: 555c45fe0d04 ("int340X/processor_thermal_device: add support for MMIO RAPL")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These modify the Intel RAPL driver to allow it to use an MMIO
interface to the hardware, make the int340X thermal driver provide
such an interface for it, add Intel Ice Lake CPU IDs to the RAPL
driver (these changes depend on the previously merged x86 arch
changes), update cpufreq to use the PM QoS framework for managing the
min and max frequency limits, and add update the imx-cpufreq-dt
cpufreq driver to support i.MX8MN.
Specifics:
- Add MMIO interface support to the Intel RAPL power capping driver
and update the int340X thermal driver to provide a RAPL MMIO
interface (Zhang Rui, Stephen Rothwell).
- Add Intel Ice Lake CPU IDs to the RAPL driver (Zhang Rui, Rajneesh
Bhardwaj).
- Make cpufreq use the PM QoS framework (instead of notifiers) for
managing the min and max frequency constraints (Viresh Kumar).
- Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
Huang)"
* tag 'pm-5.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
cpufreq: Make cpufreq_generic_init() return void
intel_rapl: need linux/cpuhotplug.h for enum cpuhp_state
powercap/rapl: Add Ice Lake NNPI support to RAPL driver
powercap/intel_rapl: add support for ICX-D
powercap/intel_rapl: add support for ICX
powercap/intel_rapl: add support for IceLake desktop
intel_rapl: Fix module autoloading issue
int340X/processor_thermal_device: add support for MMIO RAPL
intel_rapl: support two power limits for every RAPL domain
intel_rapl: support 64 bit register
intel_rapl: abstract RAPL common code
intel_rapl: cleanup hardcoded MSR access
intel_rapl: cleanup some functions
intel_rapl: abstract register access operations
intel_rapl: abstract register address
intel_rapl: introduce struct rapl_if_private
intel_rapl: introduce intel_rapl.h
intel_rapl: remove hardcoded register index
intel_rapl: use reg instead of msr
cpufreq: imx-cpufreq-dt: Add i.MX8MN support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:
- Convert thermal documents to ReST (Mauro Carvalho Chehab)
- Fix a cyclic depedency in between thermal core and governors (Daniel
Lezcano)
- Fix processor_thermal_device driver to re-evaluate power limits after
resume (Srinivas Pandruvada, Zhang Rui)
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
drivers: thermal: processor_thermal_device: Fix build warning
docs: thermal: convert to ReST
thermal/drivers/core: Use governor table to initialize
thermal/drivers/core: Add init section table for self-encapsulation
drivers: thermal: processor_thermal: Read PPCC on resume
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse easier
due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of
merge issues that Stephen has been patient with me for"
* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
debugfs: make error message a bit more verbose
orangefs: fix build warning from debugfs cleanup patch
ubifs: fix build warning after debugfs cleanup patch
driver: core: Allow subsystems to continue deferring probe
drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
arch_topology: Remove error messages on out-of-memory conditions
lib: notifier-error-inject: no need to check return value of debugfs_create functions
swiotlb: no need to check return value of debugfs_create functions
ceph: no need to check return value of debugfs_create functions
sunrpc: no need to check return value of debugfs_create functions
ubifs: no need to check return value of debugfs_create functions
orangefs: no need to check return value of debugfs_create functions
nfsd: no need to check return value of debugfs_create functions
lib: 842: no need to check return value of debugfs_create functions
debugfs: provide pr_fmt() macro
debugfs: log errors when something goes wrong
drivers: s390/cio: Fix compilation warning about const qualifiers
drivers: Add generic helper to match by of_node
driver_find_device: Unify the match function with class_find_device()
bus_find_device: Unify the match callback with class_find_device
...
|
|
Introduce MMIO RAPL support as Intel processor_thermal device exposes the
capability to do RAPL control via MMIO registers.
Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com>
Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
As a system sleep callback, proc_thermal_resume() should be defined only
if CONFIG_PM_SLEEP is defined.
This fixes a build warning when CONFIG_PM_SLEEP is not set,
drivers/thermal/intel/int340x_thermal/processor_thermal_device.c:446:12: error: 'proc_thermal_resume' defined but not used [-Werror=unused-function]
static int proc_thermal_resume(struct device *dev)
Fixes: aaba9791fbb4 ("drivers: thermal: processor_thermal: Read PPCC on resume")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 topology updates from Ingo Molnar:
"Implement multi-die topology support on Intel CPUs and expose the die
topology to user-space tooling, by Len Brown, Kan Liang and Zhang Rui.
These changes should have no effect on the kernel's existing
understanding of topologies, i.e. there should be no behavioral impact
on cache, NUMA, scheduler, perf and other topologies and overall
system performance"
* 'x86-topology-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/rapl: Cosmetic rename internal variables in response to multi-die/pkg support
perf/x86/intel/uncore: Cosmetic renames in response to multi-die/pkg support
hwmon/coretemp: Cosmetic: Rename internal variables to zones from packages
thermal/x86_pkg_temp_thermal: Cosmetic: Rename internal variables to zones from packages
perf/x86/intel/cstate: Support multi-die/package
perf/x86/intel/rapl: Support multi-die/package
perf/x86/intel/uncore: Support multi-die/package
topology: Create core_cpus and die_cpus sysfs attributes
topology: Create package_cpus sysfs attribute
hwmon/coretemp: Support multi-die/package
powercap/intel_rapl: Update RAPL domain name and debug messages
thermal/x86_pkg_temp_thermal: Support multi-die/package
powercap/intel_rapl: Support multi-die/package
powercap/intel_rapl: Simplify rapl_find_package()
x86/topology: Define topology_logical_die_id()
x86/topology: Define topology_die_id()
cpu/topology: Export die_id
x86/topology: Create topology_max_die_per_package()
x86/topology: Add CPUID.1F multi-die/package support
|
|
|
|
Now that the governor table is in place and the macro allows to browse the
table, declare the governor so the entry is added in the governor table
in the init section.
The [un]register_thermal_governors function does no longer need to use the
exported [un]register thermal governor's specific function which in turn
call the [un]register_thermal_governor. The governors are fully
self-encapsulated.
The cyclic dependency is no longer needed, remove it.
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Currently the governors are declared in their respective files but they
export their [un]register functions which in turn call the [un]register
governors core's functions. That implies a cyclic dependency which is
not desirable. There is a way to self-encapsulate the governors by letting
them to declare themselves in a __init section table.
Define the table in the asm generic linker description like the other
tables and provide the specific macros to deal with.
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Read PPCC power limits on system resume in case those limits changed
while system was suspended.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-pm@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Wei Ni <wni@nvidia.com>
Cc: Yangtao Li <tiny.windzz@gmail.com>
Cc: linux-pm@vger.kernel.org
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 101 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190113.822954939@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 51 franklin st fifth floor boston ma 02110
1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 246 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.674189849@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 51 franklin st fifth floor boston ma 02110
1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 111 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.567572064@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 2 normalized pattern(s):
it and or modify it under the terms of the gnu general public
license version 2 as published by the free software foundation this
program is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 11 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000434.249870634@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 263 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 this program is distributed
in the hope that it will be useful but without any warranty without
even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license for more
details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 97 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.025053186@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
