summaryrefslogtreecommitdiff
path: root/drivers/thermal
AgeCommit message (Collapse)Author
2015-11-23imx: thermal: use CPU temperature grade info for thresholdsTim Harvey
The IMX6Q/IMX6DL SoC's have a 2-bit temperature grade stored in OTP which is valid for all IMX6 SoC's (despite the fact that the IMXSDLRM and IMXSXRM do not document this - this has been proven via tests as well as verified by Freescale FAE). Instead of assuming a fixed 85C for passive cooling threshold and 105C for critical use the thermal grade for these configurations. We will set the critical to maxT - 5C and passive to maxT - 10C. Cc: Anson Huang <b20788@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com> ---- v3: - rebase against linux-soc-thermal.git - added ack's from Shawn and Jon v2: - remove check for IMX6Q and update comments: The OTP values have been tested on IMX6SOLO, IMX6DUALLITE, and IMX6SX and Freescale FAE has shared data with me that the OTP settings are the same and that the reference manuals will reflect this in their next updates. - set critical to max - 5C - set passive to max - 10C - display max temp in info - do not allow passive to be set above critical Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-23Revert "thermal: qcom_spmi: allow compile test"Arnd Bergmann
This just caused build errors: warning: (QCOM_SPMI_TEMP_ALARM) selects REGMAP_SPMI which has unmet direct dependencies (SPMI) drivers/built-in.o: In function `regmap_spmi_ext_gather_write': :(.text+0x609b0): undefined reference to `spmi_ext_register_write' :(.text+0x609f0): undefined reference to `spmi_ext_register_writel' While it's generally a good idea to allow compile testing, in this case, it just doesn't work, so reverting the patch that introduced the compile-test variant seems the most appropriate solution. Note that SPMI also has a 'depends on ARCH_QCOM || COMPILE_TEST' statement, so we should be able to enable SPMI on all architectures for compile testing already. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: cb7fb4d34202 ("thermal: qcom_spmi: allow compile test") Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-16thermal: rcar_thermal: remove redundant operationKuninori Morimoto
Probe error operation and remove operation are same. Let's use same function. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-16thermal: of-thermal: Reduce log level for message when can't fine thermal zoneJiada Wang
Some systems register thermal zone by themself and don't need to have thermal zones node in DT. Therefore reduce the log level from ERROR to DEBUG when thermal zone node can't be find in of_thermal_destroy_zones(). Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-12thermal: power_allocator: Use temperature reading from tzKapileshwar Singh
All thermal governors use the temperature value stored in struct thermal_zone_device. thermal_zone_device->temperature power_allocator governor should not deviate from this and use the same. Cc: Javi Merino <javi.merino@arm.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Kurtz <djkurtz@chromium.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Javi Merino <javi.merino@arm.com> Reported-by: Sugumar Natarajan <sugumar.natarajan@arm.com> Signed-off-by: Kapileshwar Singh <kapileshwar.singh@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-12thermal: rockchip: Support the RK3368 SoCs in thermal driverCaesar Wang
The RK3368 SoCs support to 2 channel TS-ADC, the temperature criteria of each channel can be configurable. The system has two Temperature Sensors, channel 0 is for CPU, and channel 1 is for GPU. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-12thermal: rockchip: consistently use int for temperaturesCaesar Wang
As Temperature is currently represented as int not long in the thermal framework since use int intead of unsigned long/long to represent temperature to avoid bogus overheat detection when negative temperature reported. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-12thermal: rockchip: Add the sort mode for adc value increment or decrementCaesar Wang
The conversion table has the adc value and temperature. In fact, the adc value only has the increment or decrement mode in conversion table. Moment, we can add the sort mode to be better support the *code_to_temp* for differenr SoCs. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-12thermal: rockchip: improve the conversion functionCaesar Wang
We should make the conversion table in as a parameter since the different SoCs have the different conversionion table. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-12thermal: rockchip: trivial: fix typo in commitCaesar Wang
Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-12thermal: rockchip: better to compatible the driver for different SoCsCaesar Wang
The current driver is default to register the two thermal sensors in probe since some SoCs maybe only have one sensor for thermal. In some cases, the channel 0 is not always the cpu or gpu sensor. So add the channel can be configured for sensors. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-11thermal: rockchip: fix compile errorCaesar Wang
Missing a include file caused compile error. drivers/thermal/rockchip_thermal.c: In function 'rockchip_thermal_suspend': drivers/thermal/rockchip_thermal.c:720:2: error: implicit declaration of function 'pinctrl_pm_select_sleep_state' [-Werror=implicit-function-declaration] ... Fixes: 7e38a5b1daa1 ("thermal: rockchip: support the sleep pinctrl state to avoid glitches") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-11Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal updates from Zhang Rui: - Implement generic devfreq cooling mechanism through frequency reduction for devices using devfreq. From Ørjan Eide and Javi Merino. - Introduce OMAP3 support on TI SoC thermal driver. From Pavel Mack and Eduardo Valentin. - A bounch of small fixes on devfreq_cooling, Exynos, IMX, Armada, and Rockchip thermal drivers. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (24 commits) thermal: exynos: Directly return 0 instead of using local ret variable thermal: exynos: Remove unneeded semicolon thermal: exynos: Use IS_ERR() because regulator cannot be NULL thermal: exynos: Fix first temperature read after registering sensor thermal: exynos: Fix unbalanced regulator disable on probe failure devfreq_cooling: return on allocation failure thermal: rockchip: support the sleep pinctrl state to avoid glitches in s2r dt-bindings: rockchip-thermal: Add the pinctrl states in this document thermal: devfreq_cooling: Make power a u64 thermal: devfreq_cooling: use a thermal_cooling_device for register and unregister thermal: underflow bug in imx_set_trip_temp() thermal: armada: Fix possible overflow in the Armada 380 thermal sensor formula thermal: imx: register irq handler later in probe thermal: rockhip: fix setting thermal shutdown polarity thermal: rockchip: fix handling of invalid readings devfreq_cooling: add trace information thermal: Add devfreq cooling PM / OPP: get the voltage for all OPPs tools/thermal: tmon: use pkg-config also for CFLAGS linux/thermal.h: rename KELVIN_TO_CELSIUS to DECI_KELVIN_TO_CELSIUS ...
2015-11-09remove abs64()Andrew Morton
Switch everything to the new and more capable implementation of abs(). Mainly to give the new abs() a bit of a workout. Cc: Michal Nazarewicz <mina86@mina86.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06Merge branches 'thermal-core', 'thermal-intel' and 'thermal-soc' into nextZhang Rui
2015-11-06Merge branch 'linus' of ↵Zhang Rui
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc
2015-11-04thermal: exynos: Directly return 0 instead of using local ret variableKrzysztof Kozlowski
The 'ret' variable in exynos5440_tmu_initialize() is initialized to 0 and returned as is. Replace it with direct return statement. This also fixes coccinelle warning: drivers/thermal/samsung/exynos_tmu.c:611:5-8: Unneeded variable: "ret". Return "0" on line 654 Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-04thermal: exynos: Remove unneeded semicolonKrzysztof Kozlowski
Remove semicolons after switch statement. Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-04thermal: exynos: Use IS_ERR() because regulator cannot be NULLKrzysztof Kozlowski
The NULL check in probe's error path is not needed because in that time the regulator cannot be NULL (regulator_get() returns valid pointer or ERR_PTR). Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-04thermal: exynos: Fix first temperature read after registering sensorKrzysztof Kozlowski
Thermal core could not read the temperature after registering the thermal sensor with thermal_zone_of_sensor_register() because the driver was not yet initialized. The call trace looked like: exynos_tmu_probe() thermal_zone_of_sensor_register() of_thermal_set_mode() thermal_zone_device_update() exynos_get_temp() if (!data->tmu_read) return -EINVAL; exynos_map_dt_data() data->tmu_read = ... This produced an error in dmesg: thermal thermal_zone0: failed to read out thermal zone (-22) Register the thermal_zone_device later, after parsing Device Tree and enabling necessary clocks, but before calling exynos_tmu_initialize() which uses the registered thermal_zone_device. Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 3b6a1a805f34 ("thermal: samsung: core: Exynos TMU rework to use device tree for configuration") Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-04thermal: exynos: Fix unbalanced regulator disable on probe failureKrzysztof Kozlowski
During probe if the regulator could not be enabled, the error exit path would still disable it. This could lead to unbalanced counter of regulator enable/disable. The patch moves code for getting and enabling the regulator from exynos_map_dt_data() to probe function because it is really not a part of getting Device Tree properties. Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 5f09a5cbd14a ("thermal: exynos: Disable the regulator on probe failure") Cc: <stable@vger.kernel.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-04devfreq_cooling: return on allocation failureDan Carpenter
If the allocation fails then we can't continue. Fixes: a76caf55e5b3 ('thermal: Add devfreq cooling') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-03thermal: rockchip: support the sleep pinctrl state to avoid glitches in s2rCaesar Wang
When we come out of system suspend state (S3) the tsadc will have been reset and back at its default state. While reprogramming the tsadc it's possible that we'll glitch the output and unintentionally cause the "over temperature" GPIO to be asserted. Since the over temperature GPIO is often hooked up to something that will cause a reboot or shutdown in hardware, this glitch can be catastrophic on some boards. We'll add support for selecting the "sleep" pinctrl state at suspend time. Boards can use this to effectively disable the tsadc at suspend time and avoid glitches when the system is resumed. Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-03Merge branch 'linus' of ↵Zhang Rui
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc
2015-11-02thermal: devfreq_cooling: Make power a u64Javi Merino
The prototype of do_div() is: uint32_t do_div(uint64_t *n, uint32_t base); Make power u64 to avoid the following warning: drivers/thermal/devfreq_cooling.c: In function 'get_dynamic_power': drivers/thermal/devfreq_cooling.c:267:2: warning: comparison of distinct pointer types lacks a cast [enabled by default] drivers/thermal/devfreq_cooling.c:267:2: warning: right shift count >= width of type [enabled by default] drivers/thermal/devfreq_cooling.c:267:2: warning: passing argument 1 of '__div64_32' from incompatible pointer type [enabled by default] include/asm-generic/div64.h:35:17: note: expected 'uint64_t *' but argument is of type 'long unsigned int *' Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-02thermal: devfreq_cooling: use a thermal_cooling_device for register and ↵Javi Merino
unregister Be consistent with what other cooling devices do and return a struct thermal_cooling_device * on register. Also, for the unregister, accept a struct thermal_cooling_device * as parameter. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-10-30thermal: underflow bug in imx_set_trip_temp()Dan Carpenter
We recently changed this from unsigned long to int so it introduced an underflow bug. Fixes: 17e8351a7739 ('thermal: consistently use int for temperatures') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-10-30thermal: armada: Fix possible overflow in the Armada 380 thermal sensor formulaNadav Haklai
Update the coefficients so the calculation will not overrun the unsigned long 32bits boundary Signed-off-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Victor Axelrod <victora@marvell.com> Reviewed-by: Neta Zur Hershkovits <neta@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-10-30thermal: imx: register irq handler later in probeBai Ping
The irq handler should be registered after the tempmon module has been initialized in a known state and the thermal_zone and cpu_cooling device have been registered successfully. Otherwise, if the irq is triggled earlier before thermal probe has been finished, it may lead to 'NULL' pointer kernel panic. Signed-off-by: Bai Ping <b51503@freescale.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-10-30thermal: rockhip: fix setting thermal shutdown polarityDmitry Torokhov
When requested thermal shutdown signal polarity is low we need to make sure that the bit representing high level of signal is reset, and not set all other bits in that register. Also rename TSADCV2_INT_PD_CLEAR to TSADCV2_INT_PD_CLEAR_MASK to better reflect its nature. Acked-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-10-30thermal: rockchip: fix handling of invalid readingsDmitry Torokhov
We attempted to signal invalid code by returning -EAGAIN from rk_tsadcv2_code_to_temp(), unfortunately the return value was stuffed directly into the temperature pointer, potentially confusing upper layers with temperature of -EINVAL. Let's split temperature from error/success indicator to avoid such confusion. Also change the way we scan the temperature table to start with the 2nd element so that we do not need to worry that we may reference out of bounds element while doing binary search and keep checking that we end up with 'mid' equal to 0 (since we are looking for the temperature that would fall into interval between the 'mid' and 'mid - 1') . Tested-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-10-30devfreq_cooling: add trace informationJavi Merino
Tracing is useful for debugging and performance tuning. Add similar traces to what's present in the cpu cooling device. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-10-30thermal: Add devfreq coolingØrjan Eide
Add a generic thermal cooling device for devfreq, that is similar to cpu_cooling. The device must use devfreq. In order to use the power extension of the cooling device, it must have registered its OPPs using the OPP library. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Ørjan Eide <orjan.eide@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-10-21Merge tag 'samsung-fixes-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung 2nd fixes for v4.3" from Kukjin Kim: - fix SOC detection of exynos thermal on exynos5260 - fix audio card detection on Peach boards - fix double of_node_put() when parsing child power domains * tag 'samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: thermal: exynos: Fix register read in TMU ARM: dts: Fix audio card detection on Peach boards ARM: EXYNOS: Fix double of_node_put() when parsing child power domains
2015-10-17thermal: exynos: Fix register read in TMUSudip Mukherjee
The value of emul_con was getting overwritten if the selected soc is SOC_ARCH_EXYNOS5260. And so as a result we were reading from the wrong register in the case of SOC_ARCH_EXYNOS5260. Fixes: 488c7455d74c ("thermal: exynos: Add the support for Exynos5433 TMU") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-10thermal: cpu_cooling: Remove usage of devm functionsVaishali Thakkar
In the function cpufreq_get_requested_power, the memory allocated for load_cpu is live within the function only. And after the allocation it is immediately freed with devm_kfree. There is no need to allocate memory for load_cpu with devm function so replace devm_kcalloc with kcalloc and devm_kfree with kfree. Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-10-10thermal: kconfig: select THERMAL_WRITABLE_TRIPS for x86 thermalSrinivas Pandruvada
After the commit "thermal: core: Add Kconfig option to enable writable trips", by default the trips are read only. This cause user space thermal controllers to poll for temperature as they can't set temperature thresholds for getting a notification via uevents. These programs use RW trip in a zone to register thresholds. Since we need to enable the new config introduced by above commit to allow writable trips, selecting CONFIG_THERMAL_WRITABLE_TRIP for x86 thermal drivers. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2015-10-01thermal: avoid division by zero in power allocatorAndrea Arcangeli
During boot I get a div by zero Oops regression starting in v4.3-rc3. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Javi Merino <javi.merino@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-29thermal: ti-soc-thermal: add OMAP36xx supportEduardo Valentin
Add OMAP36xx support to ti-soc-thermal driver. This chip is also unreliable. The data provided here is based on OMAP36xx TRM: http://www.ti.com/lit/ug/swpu177aa/swpu177aa.pdf Signed-off-by: Eduardo Valentin <edubezva@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-29ti-soc-thermal: implement omap3 supportPavel Machek
This adds support for OMAP3 chips to ti-soc-thermal. As requested by TI people, it is marked unreliable and warning is printed. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-20thermal: power_allocator: exit early if there are no cooling devicesJavi Merino
Don't waste cycles in the power allocator governor's throttle function if there are no cooling devices and exit early. This commit doesn't change any functionality, but should provide better performance for the odd case of a thermal zone with trip points but without cooling devices. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-14thermal: power_allocator: don't require tzp to be present for the thermal zoneJavi Merino
Thermal zones created using thermal_zone_device_create() may not have tzp. As the governor gets its parameters from there, allocate it while the governor is bound to the thermal zone so that it can operate in it. In this case, tzp is freed when the thermal zone switches to another governor. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-14thermal: power_allocator: relax the requirement of two passive trip pointsJavi Merino
The power allocator governor currently requires that the thermal zone has at least two passive trip points. If there aren't, the governor refuses to bind to the thermal zone. This commit relaxes that requirement. Now the governor will bind to all thermal zones regardless of how many trip points they have. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-14thermal: power_allocator: relax the requirement of a sustainable_power in tzpJavi Merino
The power allocator governor currently requires that a sustainable power is passed as part of the thermal zone's thermal zone parameters. If that parameter is not provided, it doesn't register with the thermal zone. While this parameter is strongly recommended for optimal performance, it doesn't need to be mandatory. Relax the requirement and allow the governor to bind to thermal zones that don't provide it by estimating it from the cooling devices' power model. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-14thermal: Add a function to get the minimum powerJavi Merino
The thermal core already has a function to get the maximum power of a cooling device: power_actor_get_max_power(). Add a function to get the minimum power of a cooling device. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: cpu_cooling: free power table on error or when unregisteringJavi Merino
The power table is not being freed on error from cpufreq_cooling register or when unregistering. Free it. Fixes: c36cf0717631 ("thermal: cpu_cooling: implement the power cooling device API") Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: cpu_cooling: don't call kcalloc() under rcu_read_lockJavi Merino
build_dyn_power_table() allocates the power table while holding rcu_read_lock. kcalloc using GFP_KERNEL may sleep, so it can't be called in an RCU read-side path. Move the rcu protection to the part of the function that really needs it: the part that handles the dev_pm_opp pointer received from dev_pm_opp_find_freq_ceil(). In the unlikely case that there is an OPP added to the cpu while this function is running, return -EAGAIN. Fixes: c36cf0717631 ("thermal: cpu_cooling: implement the power cooling device API") Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: db8500_cpufreq_cooling: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: ti-soc: Kconfig fix to avoid menu showing wronglyEduardo Valentin
Move the dependencies to menu, so we avoid showing it wrongly. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: ti-soc: allow compile testEduardo Valentin
Adding COMPILE_TEST flag to ti-soc driver to facilitate maintenance. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 03:03:03 +0000