summaryrefslogtreecommitdiff
path: root/drivers/thermal
AgeCommit message (Collapse)Author
2016-06-12Merge branch 'for-rc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management fixes from Zhang Rui: - fix an ordering issue in cpu cooling that cooling device is registered before it's ready (freq_table being populated). (Lukasz Luba) - fix a missing comment update (Caesar Wang) * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: add the note for set_trip_temp thermal: cpu_cooling: fix improper order during initialization
2016-06-03Merge branches 'acpica-fixes', 'acpi-video' and 'acpi-processor'Rafael J. Wysocki
* acpica-fixes: ACPICA / Hardware: Fix old register check in acpi_hw_get_access_bit_width() * acpi-video: ACPI / Thermal / video: fix max_level incorrect value * acpi-processor: ACPI / processor: Avoid reserving IO regions too early
2016-06-01thermal: cpu_cooling: fix improper order during initializationLukasz Luba
The freq_table array is not populated before calling thermal_of_cooling_register. The code which populates the freq table was introduced in commit f6859014. This should be done before registering new thermal cooling device. The log shows effects of this wrong decision. [ 2.172614] cpu cpu1: Failed to get voltage for frequency 1984518656000: -34 [ 2.220863] cpu cpu0: Failed to get voltage for frequency 1984524416000: -34 Cc: <stable@vger.kernel.org> # 3.19+ Fixes: f6859014c7e7 ("thermal: cpu_cooling: Store frequencies in descending order") Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Javi Merino <javi.merino@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-05-30ACPI / Thermal / video: fix max_level incorrect valueAaron Lu
commit 059500940def (ACPI/video: export acpi_video_get_levels) mistakenly dropped the correct value of max_level and that caused the set_level function following failed and the acpi_video backlight interface didn't get created. Fix this by passing back the correct max_level value. While at it, also fix the param used in acpi_video_device_lcd_query_levels where acpi_handle is expected but acpi_video_device is passed. Fixes: 059500940def (ACPI/video: export acpi_video_get_levels) Reported-and-tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-26Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Introduce generic ADC thermal driver, based on OF thermal (Laxman Dewangan) - Introduce new thermal driver for Tango chips (Marc Gonzalez) - Rockchip driver support for RK3399, RK3366, and some fixes (Caesar Wang, Elaine Zhang and Shawn Lin) - Add CPU power cooling model to Mediatek thermal driver (Dawei Chien) - Wider usage of dev_thermal_zone_of_sensor_register (Eduardo Valentin) - TI thermal driver gained a new maintainer (Keerthy). - Enabled powerclamp driver by checking CPU feature and package cstate counter instead of CPU whitelist (Jacob Pan) - Various fixes on thermal governor, OF thermal, Tegra, and RCAR * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (50 commits) thermal: tango: initialize TEMPSI_CFG thermal: rockchip: use the usleep_range instead of udelay thermal: rockchip: add the notes for better reading thermal: rockchip: Support RK3366 SoCs in the thermal driver thermal: rockchip: handle the power sequence for tsadc controller thermal: rockchip: update the tsadc table for rk3399 thermal: rockchip: fixes the code_to_temp for tsadc driver thermal: rockchip: disable thermal->clk in err case thermal: tegra: add Tegra132 specific SOC_THERM driver thermal: fix ptr_ret.cocci warnings thermal: mediatek: Add cpu dynamic power cooling model. thermal: generic-adc: Add ADC based thermal sensor driver thermal: generic-adc: Add DT binding for ADC based thermal sensor thermal: tegra: fix static checker warning thermal: tegra: mark PM functions __maybe_unused thermal: add temperature sensor support for tango SoC thermal: hisilicon: fix IRQ imbalance enabling thermal: hisilicon: support to use any sensor thermal: rcar: Remove binding docs for r8a7794 thermal: tegra: add PM support ...
2016-05-18Merge branches 'thermal-core', 'thermal-intel' and 'thermal-soc' into nextZhang Rui
2016-05-17thermal: tango: initialize TEMPSI_CFGMarc Gonzalez
TEMPSI_CFG is not equal to 0 at reset. It must be initialized. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: rockchip: use the usleep_range instead of udelayCaesar Wang
Documentation/timers/timers-howto.txt recommends to use usleep_range on delays > 10usec. The usleep_range indeed reduces CPU load, since the udelay will busy wait for enough loop cycles to achieve the desired delay. Fixes commit b06c52db39fd ("thermal: rockchip: handle the power sequence for tsadc controller"). Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Suggested-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: rockchip: add the notes for better readingCaesar Wang
To update the notes for keeping in mind that quickly in case someone re-read this driver in the future. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: rockchip: Support RK3366 SoCs in the thermal driverElaine Zhang
The RK3366 SoCs have two Temperature Sensors, channel 0 is for CPU channel 1 is for GPU. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: rockchip: handle the power sequence for tsadc controllerCaesar Wang
This adds the grf property to handle the tsadc power sequence on rockchip some SoCs. Verified on rk3399 can work with this patch on now. while true; do grep "" /sys/class/thermal/thermal_zone[0-1]/temp sleep .5; done /sys/class/thermal/thermal_zone0/temp:40555 /sys/class/thermal/thermal_zone1/temp:41111 /sys/class/thermal/thermal_zone0/temp:40555 /sys/class/thermal/thermal_zone1/temp:41111 /sys/class/thermal/thermal_zone0/temp:40555 /sys/class/thermal/thermal_zone1/temp:41666 /sys/class/thermal/thermal_zone0/temp:40555 /sys/class/thermal/thermal_zone1/temp:41111 /sys/class/thermal/thermal_zone0/temp:40555 /sys/class/thermal/thermal_zone1/temp:41111 /sys/class/thermal/thermal_zone0/temp:40555 Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: rockchip: update the tsadc table for rk3399Caesar Wang
This patch fixes the incorrect conversion table. The Code to Temperature mapping is updated based on sillcon results. Fixes commit b0d70338bca22cb14 ("thermal: rockchip: Support the RK3399 SoCs in thermal driver"). Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: rockchip: fixes the code_to_temp for tsadc driverCaesar Wang
We should judge the table.id[mid].code insearch algorithm on matter the adc value increment or decrement. Or otherwise, the temperature return the incorrect value in some cases. [ 1.438589] adc_val=402,temp=-40000 [ 1.438903] adc_val=403,temp=-39375 [ 1.439217] adc_val=404,temp=-38750 ... [ 1.441102] adc_val=410,temp=-40000 [ 1.441416] adc_val=411,temp=-34445 [ 1.441737] adc_val=412,temp=-33889 ... Let's fix it right now. Fixes commit 020ba95dbbbe ("thermal: rockchip: Add the sort mode for adc value increment or decrement"). Reported-by: Rocky Hao <rocky.hao@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: rockchip: disable thermal->clk in err caseShawn Lin
Disable thermal->clk when enabling pclk fails in resume routine. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: add Tegra132 specific SOC_THERM driverWei Ni
add Tegra132 specific SOC_THERM driver. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: fix ptr_ret.cocci warningskbuild test robot
drivers/thermal/tango_thermal.c:86:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci CC: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: generic-adc: Add ADC based thermal sensor driverLaxman Dewangan
In some of platform, thermal sensors like NCT thermistors are connected to the one of ADC channel. The temperature is read by reading the voltage across the sensor resistance via ADC. Lookup table for ADC read value to temperature is referred to get temperature. ADC is read via IIO framework. Add support for thermal sensor driver which read the voltage across sensor resistance from ADC through IIO framework. Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: fix static checker warningWei Ni
There has a static checker warning: warn: variable dereferenced before check 'dev' (see line 222) Since check 'dev' is unnecessary, so remove this check. Fixes: ee6d79f202a4 ("thermal: tegra: add thermtrip function") Signed-off-by: Wei Ni <wni@nvidia.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: mark PM functions __maybe_unusedArnd Bergmann
After the PM support has been added to this driver, we get a harmless warning when that support is disabled at compile time: drivers/thermal/tegra/soctherm.c:641:12: error: 'soctherm_resume' defined but not used [-Werror=unused-function] static int soctherm_resume(struct device *dev) This marks the two PM functions as __maybe_unused to shut up the warning. This is preferred over adding an #ifdef around them, as it is harder to get wrong, and provides better compile-time coverage. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: a134b4143b65 ("thermal: tegra: add PM support") Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: add temperature sensor support for tango SoCMarc Gonzalez
The Tango thermal driver provides support for the primitive temperature sensor embedded in Tango chips since the SMP8758. This sensor only generates a 1-bit signal to indicate whether the die temperature exceeds a programmable threshold. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: hisilicon: fix IRQ imbalance enablingLeo Yan
When register sensors into thermal zone during initialization phase, it reports error for IRQ imbalance enabling: [ 2.040713] WARNING: at kernel/irq/manage.c:513 [ 2.040719] Modules linked in: [ 2.040721] [ 2.040729] CPU: 1 PID: 804 Comm: irq/33-hisi_the Not tainted 4.5.0-rc4+ #505 [ 2.040732] Hardware name: HiKey Development Board (DT) [ 2.040736] task: ffffffc03ae82580 ti: ffffffc0379c8000 task.ti: ffffffc0379c8000 [ 2.040745] PC is at __enable_irq+0x74/0x84 [ 2.040749] LR is at __enable_irq+0x74/0x84 This warning is for IRQ imbalance enabling, which is caused by enable_irq() twice. During sensor's initialization it tries to enable IRQ, the driver will call thermal_zone_of_sensor_register() to bind sensors and read sensor's temperature. But at this moment the flag "data->irq_enabled" has been not initialized as correct state, so it finally introduces the function enabled_irq() to be called twice. In essentially this is caused by the flag "data->irq_enabled" is inconsistent with real hardware IRQ enabling state. So this patch is to fix this issue, firstly init "irq_enabled" flag before binding sensors to thermal zone. Also change to use the function irq_get_irqchip_state() to read back real interrupt line state. Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: hisilicon: support to use any sensorLeo Yan
In current code sensor driver registers all 4 sensors together and if any of them has not bound to thermal zone successfully then driver will return failure for driver's initialization. As a result, if DT binds thermal zone with only one sensor, then the thermal driver will not work well anymore. So this patch is to fix this issue. It allows the thermal sensor driver can register any number sensors at initialization phase, and fix up code for other related code to skip related sensor's accessing if the sensor has not been enabled in initialization phase. Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: add PM supportWei Ni
Add suspend/resume function in soctherm driver. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: handle HW initialization in one funcotionWei Ni
Handle HW initialization in one function soctherm_init(), so that the codes are more clear. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: handle clocks in one functionWei Ni
Handle clock enable/disable codes in one function soctherm_clk_enable(), so that the codes are more clear. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: add thermtrip functionWei Ni
Add support for hardware critical thermal limits to the SOC_THERM driver. It use the Linux thermal framework to create critical trip temp, and set it to SOC_THERM hardware. If these limits are breached, the chip will reset, and if appropriately configured, will turn off the PMIC. This support is critical for safe usage of the chip. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: of-thermal: allow setting trip_temp on hardwareWei Ni
In current of-thermal, the .set_trip_temp only support to set trip_temp for SW. But some sensors support to set trip_temp on hardware, so that can trigger interrupt, shutdown or any other events. This patch adds .set_trip_temp() callback in thermal_zone_of_device_ops{}, so that the sensor device can use it to set trip_temp on hardware. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: add a debugfs to show registersWei Ni
Add a debugfs interface to show register contents for debug. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: add Tegra210 specific SOC_THERM driverWei Ni
Add Tegra210 specific SOC_THERM driver. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: split tegra_soctherm driverWei Ni
Split most of the Tegra124 data and code into a Tegra124-specific file. Split most of the fuse-related code into a fuse-related source file. This is in preparation for adding a Tegra210-specific driver in a future patch. Beyond the maintainability improvements, this is intended to separate chip-specific ATE and characterization-related hacks into chip-specific files, in the hopes that they won't pollute code for other chips. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: get rid of PDIV/HOTSPOT hackWei Ni
Get rid of T124-specific PDIV/HOTSPOT hack. tegra-soctherm.c contained a hack to set the SENSOR_PDIV and SENSOR_HOTSPOT_OFFSET registers - it just did two writes of T124-specific opaque values. Convert these into a form that can be substituted on a per-chip basis, and into structure fields that have at least some independent meaning. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: combine sensor group-related dataWei Ni
Combine sensor group-related data structures into struct tegra_tsensor_group. This provides a single location for sensor group data storage. More sensor group data will be added in subsequent patches. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: move tegra thermal files into tegra directoryWei Ni
Move Tegra soctherm driver to tegra directory, it's easy to maintain and add more new function support for Tegra platforms. This will also help to split soctherm driver into common parts and chip specific data related parts. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: convert ti-thermal to use devm_thermal_zone_of_sensor_registerEduardo Valentin
This changes the driver to use the devm_ version of thermal_zone_of_sensor_register and cleans up the local points and unregister calls. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: convert tegra_thermal to use devm_thermal_zone_of_sensor_registerEduardo Valentin
This changes the driver to use the devm_ version of thermal_zone_of_sensor_register and cleans up the local points and unregister calls. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: convert rockchip_thermal to use devm_thermal_zone_of_sensor_registerEduardo Valentin
This changes the driver to use the devm_ version of thermal_zone_of_sensor_register and cleans up the local points and unregister calls. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-pm@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-kernel@vger.kernel.org Tested-by: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: convert rcar_thermal to use devm_thermal_zone_of_sensor_registerEduardo Valentin
This changes the driver to use the devm_ version of thermal_zone_of_sensor_register and cleans up the local points and unregister calls. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: convert qcom-spmi to use devm_thermal_zone_of_sensor_registerEduardo Valentin
This changes the driver to use the devm_ version of thermal_zone_of_sensor_register and cleans up the local points and unregister calls. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: convert mtk_thermal to use devm_thermal_zone_of_sensor_registerEduardo Valentin
This changes the driver to use the devm_ version of thermal_zone_of_sensor_register and cleans up the local points and unregister calls. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: convert hisi_thermal to use devm_thermal_zone_of_sensor_registerEduardo Valentin
This changes the driver to use the devm_ version of thermal_zone_of_sensor_register and cleans up the local points and unregister calls. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: of: fix cleanup when building a thermal zoneUlises Brindis
of_node_put is iterating through all terms in the tbps array even though the bind has failed. We need to only iterate through the terms that have already passed the binding step. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ulises Brindis <brindisu@lab126.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: x86_pkg_temp: Handle the FROZEN hot plug notifier actions.Richard Cochran
When performing a suspend operation, the kernel brings all of the non-boot CPUs offline, calling the hot plug notifiers with the flag, CPU_TASKS_FROZEN, set in the action code. Similarly, during resume, the CPUs are brought back online, but again the notifiers have the FROZEN flag set. While some very few drivers really need to treat suspend/resume specially, this driver unintentionally ignores the notifications. This patch changes the driver to cancel its work item when the CPU goes down, even during a suspend operation. As a result, the suspended state is no longer a special case. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-05-16thermal: check validity get_trip_hyst function pointer in bang-bang governorMichele Di Giorgio
Bang-bang thermal governor uses trip point hysteresis to make decisions. Hysteresis is a required property in the device tree for trip points, but it is an optional thermal zone device operation. Hence, we need to check whether the function pointer is valid or not. If it is not available, we assume the hysteresis to be zero. Consequently, a highly varying temperature will make the governor continuosly switch a cooling device ON and OFF. CC: Zhang Rui <rui.zhang@intel.com> CC: Eduardo Valentin <edubezval@gmail.com> CC: Peter Feuerer <peter@piie.net> Signed-off-by: Michele Di Giorgio <michele.digiorgio@arm.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-05-11Thermal / ACPI / video: add INT3406 thermal driverAaron Lu
INT3406 ACPI device object resembles an ACPI video output device, but its _BCM is said to be deprecated and should not be used. So we will make use of the raw interface to do the actual cooling. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-08thermal: int340x: processor_thermal: support acpi notificationSrinivas Pandruvada
BIOS/EC can change PPCC element dynamically and inform OS about the change. When this driver receives notification, it will read PPCC element again. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-05-08thermal/powerclamp: remove cpu whitelistJacob Pan
Powerclamp works by aligning idle time to achieve package level idle states, aka cstates. As long as one of the package cstates is available, synchronized idle injection is meaningful. This patch replaces the CPU whitelist with CPU feature and package cstate counter check such that we don't have to modify this whitelist for every new CPU. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-04-27thermal: use %d to print S32 parametersLeo Yan
Power allocator's parameters are S32 type, so use %d to print them. Acked-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-27thermal: hisilicon: increase temperature resolutionLeo Yan
When calculate temperature, old code firstly do division and then convert to "millicelsius" unit. This will lose resolution and only can read back temperature with "Celsius" unit. So firstly scale step value to "millicelsius" and then do division, so finally we can increase resolution for temperature value. Also refine the calculation from temperature value to step value. Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-20thermal: fix Mediatek thermal controller buildJohannes Berg
At least with CONFIG_COMPILE_TEST, there's no reason to assume that CONFIG_RESET_CONTROLLER is set, but the code for this controller requires it since it calls device_reset(). Make CONFIG_MTK_THERMAL properly depend on CONFIG_RESET_CONTROLLER. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-20thermal: consistently use int for trip tempWei Ni
The commit 17e8351a7739 consistently use int for temperature, however it missed a few in trip temperature and thermal_core. In current codes, the trip->temperature used "unsigned long" and zone->temperature used"int", if the temperature is negative value, it will get wrong result when compare temperature with trip temperature. This patch can fix it. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 08:18:38 +0000