summaryrefslogtreecommitdiff
path: root/drivers/thermal
AgeCommit message (Collapse)Author
2020-09-04Merge tag 'thermal-v5.9-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal fixes from Daniel Lezcano: - Fix bogus thermal shutdowns for omap4430 where bogus values resulting from an incorrect ADC conversion are too high and fire an emergency shutdown (Tony Lindgren) - Don't suppress negative temp for qcom spmi as they are valid and userspace needs them (Veera Vegivada) - Fix use-after-free in thermal_zone_device_unregister reported by Kasan (Dmitry Osipenko) * tag 'thermal-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal: core: Fix use-after-free in thermal_zone_device_unregister() thermal: qcom-spmi-temp-alarm: Don't suppress negative temp thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430
2020-09-04thermal: core: Fix use-after-free in thermal_zone_device_unregister()Dmitry Osipenko
The user-after-free bug in thermal_zone_device_unregister() is reported by KASAN. It happens because struct thermal_zone_device is released during of device_unregister() invocation, and hence the "tz" variable shouldn't be touched by thermal_notify_tz_delete(tz->id). Fixes: 55cdf0a283b8 ("thermal: core: Add notifications call in the framework") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200817235854.26816-1-digetx@gmail.com
2020-09-04thermal: qcom-spmi-temp-alarm: Don't suppress negative tempVeera Vegivada
Currently driver is suppressing the negative temperature readings from the vadc. Consumers of the thermal zones need to read the negative temperature too. Don't suppress the readings. Fixes: c610afaa21d3c6e ("thermal: Add QPNP PMIC temperature alarm driver") Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org> Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/944856eb819081268fab783236a916257de120e4.1596040416.git.gurus@codeaurora.org
2020-09-04thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430Tony Lindgren
We can sometimes get bogus thermal shutdowns on omap4430 at least with droid4 running idle with a battery charger connected: thermal thermal_zone0: critical temperature reached (143 C), shutting down Dumping out the register values shows we can occasionally get a 0x7f value that is outside the TRM listed values in the ADC conversion table. And then we get a normal value when reading again after that. Reading the register multiple times does not seem help avoiding the bogus values as they stay until the next sample is ready. Looking at the TRM chapter "18.4.10.2.3 ADC Codes Versus Temperature", we should have values from 13 to 107 listed with a total of 95 values. But looking at the omap4430_adc_to_temp array, the values are off, and the end values are missing. And it seems that the 4430 ADC table is similar to omap3630 rather than omap4460. Let's fix the issue by using values based on the omap3630 table and just ignoring invalid values. Compared to the 4430 TRM, the omap3630 table has the missing values added while the TRM table only shows every second value. Note that sometimes the ADC register values within the valid table can also be way off for about 1 out of 10 values. But it seems that those just show about 25 C too low values rather than too high values. So those do not cause a bogus thermal shutdown. Fixes: 1a31270e54d7 ("staging: omap-thermal: add OMAP4 data structures") Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200706183338.25622-1-tony@atomide.com
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-15Merge tag 'mfd-next-5.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks - Make better attempt at matching device with the correct OF node - Allow batch removal of hierarchical sub-devices New Drivers - Add STM32 Clocksource driver - Add support for Khadas System Control Microcontroller Driver Removal - Remove unused driver for TI's SMSC ECE1099 New Device Support - Add support for Intel Emmitsburg PCH to Intel LPSS PCI - Add support for Intel Tiger Lake PCH-H to Intel LPSS PCI - Add support for Dialog DA revision to Dialog DA9063 New Functionality - Add support for AXP803 to be probed by I2C Fix-ups - Numerous W=1 warning fixes - Device Tree changes (stm32-lptimer, gateworks-gsc, khadas,mcu, stmfx, cros-ec, j721e-system-controller) - Enabled Regmap 'fast I/O' in stm32-lptimer - Change BUG_ON to WARN_ON in arizona-core - Remove superfluous code/initialisation (madera, max14577) - Trivial formatting/spelling issues (madera-core, madera-i2c, da9055, max77693-private) - Switch to of_platform_populate() in sprd-sc27xx-spi - Expand out set/get brightness/pwm macros in lm3533-ctrlbank - Disable IRQs on suspend in motorola-cpcap - Clean-up error handling in intel_soc_pmic_mrfld - Ensure correct removal order of sub-devices in madera - Many s/HTTP/HTTPS/ link changes - Ensure name used with Regmap is unique in syscon Bug Fixes - Properly 'put' clock on unbind and error in arizona-core - Fix revision handling in da9063 - Fix 'assignment of read-only location' error in kempld-core - Avoid using the Regmap API when atomic in rn5t618 - Redefine volatile register description in rn5t618 - Use locking to protect event handler in dln2" * tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits) mfd: syscon: Use a unique name with regmap_config mfd: Replace HTTP links with HTTPS ones mfd: dln2: Run event handler loop under spinlock mfd: madera: Improve handling of regulator unbinding mfd: mfd-core: Add mechanism for removal of a subset of children mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8() mfd: max14577: Remove redundant initialization of variable current_bits mfd: rn5t618: Fix caching of battery related registers mfd: max77693-private: Drop a duplicated word mfd: da9055: pdata.h: Drop a duplicated word mfd: rn5t618: Make restart handler atomic safe mfd: kempld-core: Fix 'assignment of read-only location' error mfd: axp20x: Allow the AXP803 to be probed by I2C mfd: da9063: Add support for latest DA silicon revision mfd: da9063: Fix revision handling to correctly select reg tables dt-bindings: mfd: st,stmfx: Remove I2C unit name dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller mfd: motorola-cpcap: Disable interrupt for suspend mfd: smsc-ece1099: Remove driver mfd: core: Add OF_MFD_CELL_REG() helper ...
2020-08-07thermal: don't make THERMAL_NETLINK 'default y'Linus Torvalds
We just don't do that. "default y" is for things that are needed for compatibility (when an old feature is made unconditional), or for things that are basically part of the infrastructure of a platform. And it can possibly be used for questions that don't enable code on their own, but are used to enable or disable a whole slew of other questions. A new feature that people aren't using is never 'default y', unless it cures cancer or ends world hunger. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-06Merge tag 'thermal-v5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Add support to enable/disable the thermal zones resulting on core code and drivers cleanup (Andrzej Pietrasiewicz) - Add generic netlink support for userspace notifications: events, temperature and discovery commands (Daniel Lezcano) - Fix redundant initialization for a ret variable (Colin Ian King) - Remove the clock cooling code as it is used nowhere (Amit Kucheria) - Add the rcar_gen3_thermal's r8a774e1 support (Marian-Cristian Rotariu) - Replace all references to thermal.txt in the documentation to the corresponding yaml files (Amit Kucheria) - Add maintainer entry for the IPA (Lukasz Luba) - Add support for MSM8939 for the tsens (Shawn Guo) - Update power allocator and devfreq cooling to SPDX licensing (Lukasz Luba) - Add Cannon Lake Low Power PCH support (Sumeet Pawnikar) - Add tsensor support for V2 mediatek thermal system (Henry Yen) - Fix thermal zone lookup by ID for the core code (Thierry Reding) * tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (40 commits) thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH support thermal: mediatek: Add tsensor support for V2 thermal system thermal: mediatek: Prepare to add support for other platforms thermal: Update power allocator and devfreq cooling to SPDX licensing MAINTAINERS: update entry to thermal governors file name prefixing thermal: core: Add thermal zone enable/disable notification thermal: qcom: tsens-v0_1: Add support for MSM8939 dt-bindings: tsens: qcom: Document MSM8939 compatible thermal: core: Fix thermal zone lookup by ID thermal: int340x: processor_thermal: fix: update Jasper Lake PCI id thermal: imx8mm: Support module autoloading thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor() MAINTAINERS: Add maintenance information for IPA thermal: rcar_gen3_thermal: Do not shadow thcode variable dt-bindings: thermal: Get rid of thermal.txt and replace references thermal: core: Move initialization after core initcall thermal: netlink: Improve the initcall ordering net: genetlink: Move initialization to core_initcall thermal: rcar_gen3_thermal: Add r8a774e1 support thermal/drivers/clock_cooling: Remove clock_cooling code ...
2020-08-06Merge tag 'sched-fifo-2020-08-04' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sched/fifo updates from Ingo Molnar: "This adds the sched_set_fifo*() encapsulation APIs to remove static priority level knowledge from non-scheduler code. The three APIs for non-scheduler code to set SCHED_FIFO are: - sched_set_fifo() - sched_set_fifo_low() - sched_set_normal() These are two FIFO priority levels: default (high), and a 'low' priority level, plus sched_set_normal() to set the policy back to non-SCHED_FIFO. Since the changes affect a lot of non-scheduler code, we kept this in a separate tree" * tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) sched,tracing: Convert to sched_set_fifo() sched: Remove sched_set_*() return value sched: Remove sched_setscheduler*() EXPORTs sched,psi: Convert to sched_set_fifo_low() sched,rcutorture: Convert to sched_set_fifo_low() sched,rcuperf: Convert to sched_set_fifo_low() sched,locktorture: Convert to sched_set_fifo() sched,irq: Convert to sched_set_fifo() sched,watchdog: Convert to sched_set_fifo() sched,serial: Convert to sched_set_fifo() sched,powerclamp: Convert to sched_set_fifo() sched,ion: Convert to sched_set_normal() sched,powercap: Convert to sched_set_fifo*() sched,spi: Convert to sched_set_fifo*() sched,mmc: Convert to sched_set_fifo*() sched,ivtv: Convert to sched_set_fifo*() sched,drm/scheduler: Convert to sched_set_fifo*() sched,msm: Convert to sched_set_fifo*() sched,psci: Convert to sched_set_fifo*() sched,drbd: Convert to sched_set_fifo*() ...
2020-08-04thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH supportSumeet Pawnikar
Add LP (Low Power) PCH id for Cannon Lake (CNL) based platforms. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1596097503-27924-1-git-send-email-sumeet.r.pawnikar@intel.com
2020-08-03Merge branches 'pm-em' and 'pm-core'Rafael J. Wysocki
* pm-em: OPP: refactor dev_pm_opp_of_register_em() and update related drivers Documentation: power: update Energy Model description PM / EM: change name of em_pd_energy to em_cpu_energy PM / EM: remove em_register_perf_domain PM / EM: add support for other devices than CPUs in Energy Model PM / EM: update callback structure and add device pointer PM / EM: introduce em_dev_register_perf_domain function PM / EM: change naming convention from 'capacity' to 'performance' * pm-core: mmc: jz4740: Use pm_ptr() macro PM: Make *_DEV_PM_OPS macros use __maybe_unused PM: core: introduce pm_ptr() macro
2020-07-31thermal: mediatek: Add tsensor support for V2 thermal systemHenry Yen
This patch adds full support for ver 2 thermal system (e.g., MT7622 SoC). The new changes include reading calibration data, converting temperature and hardware initialization which are specific for version 2 system. Each platform decides which function to call according to its version. Fixes: 3966be3c08c3 ("thermal: mediatek: add support for MT7622 SoC") Signed-off-by: Henry Yen <henry.yen@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Tested-By: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1588238074-19338-3-git-send-email-henry.yen@mediatek.com
2020-07-31thermal: mediatek: Prepare to add support for other platformsHenry Yen
It is known that Mediatek owns two thermal systems, which only differ in the way of reading calibration data and converting temperature. MT8173, MT8183, MT2701 and MT2712 belongs to version 1 thermal system, and MT7622 belongs to version 2. In order to handle both systems, the suffix _V1 is appended to the current code, and then the second patch will add _V2 functions with the same purpose but different implementation. Signed-off-by: Henry Yen <henry.yen@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Tested-By: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1588238074-19338-2-git-send-email-henry.yen@mediatek.com
2020-07-30thermal: Update power allocator and devfreq cooling to SPDX licensingLukasz Luba
Update the license to the SPDX licensing format. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200730165117.13998-1-lukasz.luba@arm.com
2020-07-29thermal: core: Add thermal zone enable/disable notificationDaniel Lezcano
Now the calls to enable/disable a thermal zone are centralized in a call to a function, we can add in these the corresponding netlink notifications. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20200727231033.26512-1-daniel.lezcano@linaro.org
2020-07-27thermal: qcom: tsens-v0_1: Add support for MSM8939Shawn Guo
The TSENS integrated on MSM8939 is a v0_1 device with 10 sensors. Different from its predecessor MSM8916, where 'calib_sel' bits sit in separate qfprom word, MSM8939 has 'cailb' and 'calib_sel' bits mixed and spread on discrete offsets. That's why all qfprom bits are read as one go and later mapped to calibration data for MSM8939. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Konrad Dybcio <konradybcio@gmail.com> /* on Asus Z00T smartphone */ Acked-by: Konrad Dybcio <konradybcio@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629144926.665-3-shawn.guo@linaro.org
2020-07-24thermal: core: Fix thermal zone lookup by IDThierry Reding
When a thermal zone is looked up by an ID and no zone is found matching that ID, the thermal_zone_get_by_id() function will return a pointer to the thermal zone list head which isn't actually a valid thermal zone. This can lead to a subsequent crash because a valid pointer is returned to the called, but dereferencing that pointer as struct thermal_zone is not safe. Fixes: 329b064fbd13 ("thermal: core: Get thermal zone by id") Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200724170105.2705467-1-thierry.reding@gmail.com
2020-07-24thermal: int340x: processor_thermal: fix: update Jasper Lake PCI idSumeet Pawnikar
Update PCI device id for Jasper Lake processor thermal device. With this proc_thermal driver is getting loaded and processor thermal functionality works on Jasper Lake system. Fixes: f64a6583d3f5 ("thermal: int340x: processor_thermal: Add Jasper Lake support") Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1595577146-1221-1-git-send-email-sumeet.r.pawnikar@intel.com
2020-07-21thermal: imx8mm: Support module autoloadingAnson Huang
Add a missing MODULE_DEVICE_TABLE entry to support module autoloading. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1592380074-19222-1-git-send-email-Anson.Huang@nxp.com
2020-07-21thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor()Dan Carpenter
This condition is reversed and will cause breakage. Fixes: 7440f518dad9 ("thermal/drivers/ti-soc-thermal: Avoid dereferencing ERR_PTR") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200616091949.GA11940@mwanda
2020-07-21thermal: rcar_gen3_thermal: Do not shadow thcode variableNiklas Söderlund
The function rcar_gen3_thermal_calc_coefs() takes an argument called 'thcode' which shadows the static global 'thcode' variable. This is not harmful but bad for readability and is harmful for planned changes to the driver. The THCODE values should be read from hardware fuses if they are available and only fallback to the global 'thcode' variable if they are not fused. Rename the global 'thcode' variable to 'thcodes' to avoid shadowing the symbol in functions that take it as an argument. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200610003300.884258-1-niklas.soderlund+renesas@ragnatech.se
2020-07-21thermal: core: Move initialization after core initcallDaniel Lezcano
The generic netlink is initialized at subsys_initcall, so far after the thermal init routine and the thermal generic netlink family initialization. On ŝome platforms, that leads to a memory corruption. The fix was sent to netdev@ to move the genetlink framework initialization at core_initcall. Move the thermal core initialization to postcore level which is very close to core level. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20200717164217.18819-2-daniel.lezcano@linaro.org
2020-07-21thermal: netlink: Improve the initcall orderingDaniel Lezcano
The initcalls like to play joke. In our case, the thermal-netlink initcall is called after the thermal-core initcall but this one sends a notification before the former is initialized. No issue was spotted, but it could lead to a memory corruption, so instead of relying on the core_initcall for the thermal-netlink, let's initialize directly from the thermal-core init routine, so we have full control of the init ordering. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20200717164217.18819-1-daniel.lezcano@linaro.org
2020-07-21thermal: rcar_gen3_thermal: Add r8a774e1 supportMarian-Cristian Rotariu
Add r8a774e1 specific compatible string. Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1594811350-14066-4-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
2020-07-21thermal/drivers/clock_cooling: Remove clock_cooling codeAmit Kucheria
clock_cooling has no in-kernel users. It has never found any use in drivers as far as I can tell. Remove the code. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/aa5d5ac2589cf7b14ece882130731b4a916849a6.1593619943.git.amit.kucheria@linaro.org
2020-07-21thermal: core: remove redundant initialization of variable retColin Ian King
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200706140747.489075-1-colin.king@canonical.com
2020-07-21thermal: netlink: Fix compilation error when CONFIG_NET=nDaniel Lezcano
When the network is not configured, the netlink is disabled on all the system. The thermal framework assumed the netlink is always opt-in. Fix this by adding a Kconfig option for the netlink notification, defaulting to yes and depending on CONFIG_NET. As the change implies multiple stubs and in order to not pollute the internal thermal header, the thermal_nelink.h has been added and included in the thermal_core.h, so this one regain some kind of clarity. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20200707090159.1018-1-daniel.lezcano@linaro.org
2020-07-16Merge tag 'thermal-v5.8-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux into master Pull thermal fixes from Daniel Lezcano: - Fix invalid index array access on int340x_thermal leading to a kernel panic (Bartosz Szczepanek) - Fix debug message level to prevent flooding on some platform (Alex Hung) - Fix invalid bank access by reverting "thermal: mediatek: fix register index error" (Enric Balletbo i Serra) * tag 'thermal-v5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: Revert "thermal: mediatek: fix register index error" thermal: int3403_thermal: Downgrade error message thermal/int340x_thermal: Prevent page fault on .set_mode() op
2020-07-15Revert "thermal: mediatek: fix register index error"Enric Balletbo i Serra
This reverts commit eb9aecd90d1a39601e91cd08b90d5fee51d321a6 The above patch is supposed to fix a register index error on mt2701. It is not clear if the problem solved is a hang or just an invalid value returned, my guess is the second. The patch introduces, though, a new hang on MT8173 device making them unusable. So, seems reasonable, revert the patch because introduces a worst issue. The reason I send a revert instead of trying to fix the issue for MT8173 is because the information needed to fix the issue is in the datasheet and is not public. So I am not really able to fix it. Fixes the following bug when CONFIG_MTK_THERMAL is set on MT8173 devices. [ 2.222488] Unable to handle kernel paging request at virtual address ffff8000125f5001 [ 2.230421] Mem abort info: [ 2.233207] ESR = 0x96000021 [ 2.236261] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.241571] SET = 0, FnV = 0 [ 2.244623] EA = 0, S1PTW = 0 [ 2.247762] Data abort info: [ 2.250640] ISV = 0, ISS = 0x00000021 [ 2.254473] CM = 0, WnR = 0 [ 2.257544] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041850000 [ 2.264251] [ffff8000125f5001] pgd=000000013ffff003, pud=000000013fffe003, pmd=000000013fff9003, pte=006800001100b707 [ 2.274867] Internal error: Oops: 96000021 [#1] PREEMPT SMP [ 2.280432] Modules linked in: [ 2.283483] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc6+ #162 [ 2.289914] Hardware name: Google Elm (DT) [ 2.294003] pstate: 20000005 (nzCv daif -PAN -UAO) [ 2.298792] pc : mtk_read_temp+0xb8/0x1c8 [ 2.302793] lr : mtk_read_temp+0x7c/0x1c8 [ 2.306794] sp : ffff80001003b930 [ 2.310100] x29: ffff80001003b930 x28: 0000000000000000 [ 2.315404] x27: 0000000000000002 x26: ffff0000f9550b10 [ 2.320709] x25: ffff0000f9550a80 x24: 0000000000000090 [ 2.326014] x23: ffff80001003ba24 x22: 00000000610344c0 [ 2.331318] x21: 0000000000002710 x20: 00000000000001f4 [ 2.336622] x19: 0000000000030d40 x18: ffff800011742ec0 [ 2.341926] x17: 0000000000000001 x16: 0000000000000001 [ 2.347230] x15: ffffffffffffffff x14: ffffff0000000000 [ 2.352535] x13: ffffffffffffffff x12: 0000000000000028 [ 2.357839] x11: 0000000000000003 x10: ffff800011295ec8 [ 2.363143] x9 : 000000000000291b x8 : 0000000000000002 [ 2.368447] x7 : 00000000000000a8 x6 : 0000000000000004 [ 2.373751] x5 : 0000000000000000 x4 : ffff800011295cb0 [ 2.379055] x3 : 0000000000000002 x2 : ffff8000125f5001 [ 2.384359] x1 : 0000000000000001 x0 : ffff0000f9550a80 [ 2.389665] Call trace: [ 2.392105] mtk_read_temp+0xb8/0x1c8 [ 2.395760] of_thermal_get_temp+0x2c/0x40 [ 2.399849] thermal_zone_get_temp+0x78/0x160 [ 2.404198] thermal_zone_device_update.part.0+0x3c/0x1f8 [ 2.409589] thermal_zone_device_update+0x34/0x48 [ 2.414286] of_thermal_set_mode+0x58/0x88 [ 2.418375] thermal_zone_of_sensor_register+0x1a8/0x1d8 [ 2.423679] devm_thermal_zone_of_sensor_register+0x64/0xb0 [ 2.429242] mtk_thermal_probe+0x690/0x7d0 [ 2.433333] platform_drv_probe+0x5c/0xb0 [ 2.437335] really_probe+0xe4/0x448 [ 2.440901] driver_probe_device+0xe8/0x140 [ 2.445077] device_driver_attach+0x7c/0x88 [ 2.449252] __driver_attach+0xac/0x178 [ 2.453082] bus_for_each_dev+0x78/0xc8 [ 2.456909] driver_attach+0x2c/0x38 [ 2.460476] bus_add_driver+0x14c/0x230 [ 2.464304] driver_register+0x6c/0x128 [ 2.468131] __platform_driver_register+0x50/0x60 [ 2.472831] mtk_thermal_driver_init+0x24/0x30 [ 2.477268] do_one_initcall+0x50/0x298 [ 2.481098] kernel_init_freeable+0x1ec/0x264 [ 2.485450] kernel_init+0x1c/0x110 [ 2.488931] ret_from_fork+0x10/0x1c [ 2.492502] Code: f9401081 f9400402 b8a67821 8b010042 (b9400042) [ 2.498599] ---[ end trace e43e3105ed27dc99 ]--- [ 2.503367] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.511020] SMP: stopping secondary CPUs [ 2.514941] Kernel Offset: disabled [ 2.518421] CPU features: 0x090002,25006005 [ 2.522595] Memory Limit: none [ 2.525644] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]-- Cc: Michael Kao <michael.kao@mediatek.com> Fixes: eb9aecd90d1a ("thermal: mediatek: fix register index error") Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200707103412.1010823-1-enric.balletbo@collabora.com
2020-07-15thermal: int3403_thermal: Downgrade error messageAlex Hung
Downgrade "Unsupported event" message from dev_err to dev_dbg to avoid flooding with this message on some platforms. Cc: stable@vger.kernel.org # v5.4+ Suggested-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Alex Hung <alex.hung@canonical.com> [ rzhang: fix typo in changelog ] Signed-off-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20200615223957.183153-1-alex.hung@canonical.com
2020-07-14thermal/int340x_thermal: Prevent page fault on .set_mode() opBartosz Szczepanek
Starting from commit "thermal/int340x_thermal: Don't require IDSP to exist", priv->current_uuid_index is initialized to -1. This value may be passed to int3400_thermal_run_osc() from int3400_thermal_set_mode, contributing to page fault when accessing int3400_thermal_uuids array at index -1. This commit adds a check on uuid value to int3400_thermal_run_osc. Fixes: 8d485da0ddee ("thermal/int340x_thermal: Don't require IDSP to exist") Signed-off-by: Bartosz Szczepanek <bsz@semihalf.com> Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@linux.intel.com> [ rzhang: Add Fixes tag ] Signed-off-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20200708134613.131555-1-bsz@semihalf.com
2020-07-07thermal: core: Add notifications call in the frameworkDaniel Lezcano
The generic netlink protocol is implemented but the different notification functions are not yet connected to the core code. These changes add the notification calls in the different corresponding places. Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20200706105538.2159-4-daniel.lezcano@linaro.org
2020-07-07thermal: core: genetlink support for events/cmd/samplingDaniel Lezcano
Initially the thermal framework had a very simple notification mechanism to send generic netlink messages to the userspace. The notification function was never called from anywhere and the corresponding dead code was removed. It was probably a first attempt to introduce the netlink notification. At LPC2018, the presentation "Linux thermal: User kernel interface", proposed to create the notifications to the userspace via a kfifo. The advantage of the kfifo is the performance. It is usually used from a 1:1 communication channel where a driver captures data and sends it as fast as possible to a userspace process. The drawback is that only one process uses the notification channel exclusively, thus no other process is allowed to use the channel to get temperature or notifications. This patch defines a generic netlink API to discover the current thermal setup and adds event notifications as well as temperature sampling. As any genetlink protocol, it can evolve and the versioning allows to keep the backward compatibility. In order to prevent the user from getting flooded with data on a single channel, there are two multicast channels, one for the temperature sampling when the thermal zone is updated and another one for the events, so the user can get the events only without the thermal zone temperature sampling. Also, a list of commands to discover the thermal setup is added and can be extended when needed. Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20200706105538.2159-3-daniel.lezcano@linaro.org
2020-07-07thermal: core: Get thermal zone by idDaniel Lezcano
The next patch will introduce the generic netlink protocol to handle events, sampling and command from the thermal framework. In order to deal with the thermal zone, it uses its unique identifier to characterize it in the message. Passing an integer is more efficient than passing an entire string. This change provides a function returning back a thermal zone pointer corresponding to the identifier passed as parameter. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20200706105538.2159-2-daniel.lezcano@linaro.org
2020-07-07thermal: core: Add helpers to browse the cdev, tz and governor listDaniel Lezcano
The cdev, tz and governor list, as well as their respective locks are statically defined in the thermal_core.c file. In order to give a sane access to these list, like browsing all the thermal zones or all the cooling devices, let's define a set of helpers where we pass a callback as a parameter to be called for each thermal entity. We keep the self-encapsulation and ensure the locks are correctly taken when looking at the list. Acked-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200706105538.2159-1-daniel.lezcano@linaro.org
2020-07-07thermal: Make thermal_zone_device_is_enabled() available to core onlyAndrzej Pietrasiewicz
This function is not needed by drivers. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200703104354.19657-4-andrzej.p@collabora.com
2020-07-07thermal: imx: Use driver's local data to decide whether to run a measurementAndrzej Pietrasiewicz
Use driver's local data to evaluate the need to run or not to run a measurement. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200703104354.19657-3-andrzej.p@collabora.com
2020-06-29thermal: Rename set_mode() to change_mode()Andrzej Pietrasiewicz
set_mode() is only called when tzd's mode is about to change. Actual setting is performed in thermal_core, in thermal_zone_device_set_mode(). The meaning of set_mode() callback is actually to notify the driver about the mode being changed and giving the driver a chance to oppose such change. To better reflect the purpose of the method rename it to change_mode() Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> [for acerhdf] Acked-by: Peter Kaestle <peter@piie.net> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-12-andrzej.p@collabora.com
2020-06-29thermal: Simplify or eliminate unnecessary set_mode() methodsAndrzej Pietrasiewicz
Setting polling_delay is now done at thermal_core level (by not polling DISABLED devices), so no need to repeat this code. int340x: Checking for an impossible enum value is unnecessary. acpi/thermal: It only prints debug messages. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> [for acerhdf] Acked-by: Peter Kaestle <peter@piie.net> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-11-andrzej.p@collabora.com
2020-06-29thermal: core: Stop polling DISABLED thermal devicesAndrzej Pietrasiewicz
Polling DISABLED devices is not desired, as all such "disabled" devices are meant to be handled by userspace. This patch introduces and uses should_stop_polling() to decide whether the device should be polled or not. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-10-andrzej.p@collabora.com
2020-06-29thermal: Explicitly enable non-changing thermal zone devicesAndrzej Pietrasiewicz
Some thermal zone devices never change their state, so they should be always enabled. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-9-andrzej.p@collabora.com
2020-06-29thermal: Use mode helpers in driversAndrzej Pietrasiewicz
Use thermal_zone_device_{en|dis}able() and thermal_zone_device_is_enabled(). Consequently, all set_mode() implementations in drivers: - can stop modifying tzd's "mode" member, - shall stop taking tzd's lock, as it is taken in the helpers - shall stop calling thermal_zone_device_update() as it is called in the helpers - can assume they are called when the mode truly changes, so checks to verify that can be dropped Not providing set_mode() by a driver no longer prevents the core from being able to set tzd's mode, so the relevant check in mode_store() is removed. Other comments: - acpi/thermal.c: tz->thermal_zone->mode will be updated only after we return from set_mode(), so use function parameter in thermal_set_mode() instead, no need to call acpi_thermal_check() in set_mode() - thermal/imx_thermal.c: regmap writes and mode assignment are done in thermal_zone_device_{en|dis}able() and set_mode() callback - thermal/intel/intel_quark_dts_thermal.c: soc_dts_{en|dis}able() are a part of set_mode() callback, so they don't need to modify tzd->mode, and don't need to fall back to the opposite mode if unsuccessful, as the return value will be propagated to thermal_zone_device_{en|dis}able() and ultimately tzd's member will not be changed in thermal_zone_device_set_mode(). - thermal/of-thermal.c: no need to set zone->mode to DISABLED in of_parse_thermal_zones() as a tzd is kzalloc'ed so mode is DISABLED anyway Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> [for acerhdf] Acked-by: Peter Kaestle <peter@piie.net> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-8-andrzej.p@collabora.com
2020-06-29thermal: Add mode helpersAndrzej Pietrasiewicz
Prepare for making the drivers not access tzd's private members. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [staticize thermal_zone_device_set_mode()] Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-7-andrzej.p@collabora.com
2020-06-29thermal: remove get_mode() operation of driversAndrzej Pietrasiewicz
get_mode() is now redundant, as the state is stored in struct thermal_zone_device. Consequently the "mode" attribute in sysfs can always be visible, because it is always possible to get the mode from struct tzd. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> [for acerhdf] Acked-by: Peter Kaestle <peter@piie.net> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-6-andrzej.p@collabora.com
2020-06-29thermal: Store device mode in struct thermal_zone_deviceAndrzej Pietrasiewicz
Prepare for eliminating get_mode(). Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> [for acerhdf] Acked-by: Peter Kaestle <peter@piie.net> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-5-andrzej.p@collabora.com
2020-06-29thermal: Store thermal mode in a dedicated enumAndrzej Pietrasiewicz
Prepare for storing mode in struct thermal_zone_device. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> [for acerhdf] Acked-by: Peter Kaestle <peter@piie.net> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-3-andrzej.p@collabora.com
2020-06-29thermal/drivers/rcar_gen3: Fix undefined temperature if negativeDien Pham
As description for DIV_ROUND_CLOSEST in file include/linux/kernel.h. "Result is undefined for negative divisors if the dividend variable type is unsigned and for negative dividends if the divisor variable type is unsigned." In current code, the FIXPT_DIV uses DIV_ROUND_CLOSEST but has not checked sign of divisor before using. It makes undefined temperature value in case the value is negative. This patch fixes to satisfy DIV_ROUND_CLOSEST description and fix bug too. Note that the variable name "reg" is not good because it should be the same type as rcar_gen3_thermal_read(). However, it's better to rename the "reg" in a further patch as cleanup. Signed-off-by: Van Do <van.do.xw@renesas.com> Signed-off-by: Dien Pham <dien.pham.ry@renesas.com> [shimoda: minor fixes, add Fixes tag] Fixes: 564e73d283af ("thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Niklas Soderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Niklas Soderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1593085099-2057-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
2020-06-29thermal/drivers/cpufreq_cooling: Fix wrong frequency converted from powerFinley Xiao
The function cpu_power_to_freq is used to find a frequency and set the cooling device to consume at most the power to be converted. For example, if the power to be converted is 80mW, and the em table is as follow. struct em_cap_state table[] = { /* KHz mW */ { 1008000, 36, 0 }, { 1200000, 49, 0 }, { 1296000, 59, 0 }, { 1416000, 72, 0 }, { 1512000, 86, 0 }, }; The target frequency should be 1416000KHz, not 1512000KHz. Fixes: 349d39dc5739 ("thermal: cpu_cooling: merge frequency and power tables") Cc: <stable@vger.kernel.org> # v4.13+ Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200619090825.32747-1-finley.xiao@rock-chips.com
2020-06-29thermal/drivers/tsens: Fix compilation warnings by making functions staticAmit Kucheria
After merging tsens-common.c into tsens.c, we can now mark some functions static so they don't need any prototype declarations. This fixes the following issue reported by lkp. >> drivers/thermal/qcom/tsens.c:385:13: warning: no previous prototype for 'tsens_critical_irq_thread' [-Wmissing-prototypes] 385 | irqreturn_t tsens_critical_irq_thread(int irq, void *data) | ^~~~~~~~~~~~~~~~~~~~~~~~~ >> drivers/thermal/qcom/tsens.c:455:13: warning: no previous prototype for 'tsens_irq_thread' [-Wmissing-prototypes] 455 | irqreturn_t tsens_irq_thread(int irq, void *data) | ^~~~~~~~~~~~~~~~ >> drivers/thermal/qcom/tsens.c:523:5: warning: no previous prototype for 'tsens_set_trips' [-Wmissing-prototypes] 523 | int tsens_set_trips(void *_sensor, int low, int high) | ^~~~~~~~~~~~~~~ >> drivers/thermal/qcom/tsens.c:560:5: warning: no previous prototype for 'tsens_enable_irq' [-Wmissing-prototypes] 560 | int tsens_enable_irq(struct tsens_priv *priv) | ^~~~~~~~~~~~~~~~ >> drivers/thermal/qcom/tsens.c:573:6: warning: no previous prototype for 'tsens_disable_irq' [-Wmissing-prototypes] 573 | void tsens_disable_irq(struct tsens_priv *priv) | ^~~~~~~~~~~~~~~~~ Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/6757a26876b29922929abf64b1c11fa3b3033d03.1590579709.git.amit.kucheria@linaro.org
2020-06-29thermal/drivers/sprd: Fix return value of sprd_thm_probe()Tiezhu Yang
When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Fixes: 554fdbaf19b1 ("thermal: sprd: Add Spreadtrum thermal driver support") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1590371941-25430-1-git-send-email-yangtiezhu@loongson.cn
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 09:23:56 +0000