summaryrefslogtreecommitdiff
path: root/drivers/thermal/of-thermal.c
AgeCommit message (Collapse)Author
2020-03-12thermal: of-thermal: add API for getting sensor ID from DTAnson Huang
This patch adds new API thermal_zone_of_get_sensor_id() to provide the feature of getting sensor ID from DT thermal zone's node. It's useful for thermal driver to register the specific thermal zone devices from DT in a common way. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1582330132-13461-2-git-send-email-Anson.Huang@nxp.com
2020-01-27thermal: of: Make thermal_zone_of_sensor_register return -ENODEV if a sensor ↵Peter Mamonov
OF node is missing When devm_thermal_zone_of_sensor_register() is called from hwmon_thermal_add_sensor() it is possible that the relevant sensor is missing an OF node. In this case thermal_zone_of_sensor_register() returns -EINVAL which causes hwmon_thermal_add_sensor() to fail as well. This patch changes relevant return code of thermal_zone_of_sensor_register() to -ENODEV, which is tolerated by hwmon_thermal_add_sensor(). Here is a particular case of such behaviour: the Marvell ethernet PHYs driver registers hwmon device for the built-in temperature sensor (see drivers/net/phy/marvell.c). Since the sensor doesn't have associated OF node devm_hwmon_device_register() returns error which ultimately causes failure of the PHY driver's probe function. Signed-off-by: Peter Mamonov <pmamonov@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20190827143952.19591-1-pmamonov@gmail.com
2020-01-27thermal/drivers/of-thermal: Move the of_thermal_free_zone() to the init sectionDaniel Lezcano
The function of_thermal_free_zone() is only used the initialization function which all belonging to the init section. Move it also to the __init section. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191219222154.16100-2-daniel.lezcano@linaro.org
2020-01-27thermal/drivers/of-thermal: Make of_thermal_destroy_zones staticDaniel Lezcano
The function of_thermal_destroy_zones() is only used internally by the of_parse_thermal_zones() for rollbacking in case of error. Make it static and tag it as an __init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191219222154.16100-1-daniel.lezcano@linaro.org
2020-01-27thermal: of-thermal: Appease the kernel-doc deityAmit Kucheria
Replace a comment starting with /** by simply /* to avoid having it interpreted as a kernel-doc comment. Fixes the following warning when compile with make W=1: linux.git/drivers/thermal/of-thermal.c:761: warning: cannot understand function prototype: 'const char *trip_types[] = ' Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/dc742789bf4b3c8207b01c7946f2b401350536a7.1574242756.git.amit.kucheria@linaro.org
2019-05-13of: thermal: Improve print informationYangtao Li
Define pr_fmt macro to add a prefix to the message, this can make the thermal log better recognized. Before: [ 0.602672] nfc: nfc_init: NFC Core ver 0.1 [ 0.602828] NET: Registered protocol family 39 [ 0.603435] clocksource: Switched to clocksource mct-frc [ 0.746216] failed to build thermal zone cpu-thermal: -22 [ 0.746451] NET: Registered protocol family 2 After: [ 0.602804] NET: Registered protocol family 39 [ 0.603463] clocksource: Switched to clocksource mct-frc [ 0.746309] thermal_sys: failed to build thermal zone cpu-thermal: -22 [ 0.746545] NET: Registered protocol family 2 Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: of-thermal: Print name of device node with errorAmit Kucheria
Make it easier to debug devicetree definition in case of errors. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-26Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal SoC updates from Eduardo Valentin: "Several new things coming up. Specifics: - Rework of tsens and hisi thermal drivers - OF-thermal now allows sharing multiple cooling devices on maps - Added support for r8a7744 and R8A77970 on rcar thermal driver - Added support for r8a774a1 on rcar_gen3 thermal driver - New thermal driver stm32 - Fixes on multiple thermal drivers: of-thermal, imx, qoriq, armada, qcom-spmi, rcar, da9062/61" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (41 commits) thermal: da9062/61: Prevent hardware access during system suspend thermal: rcar_thermal: Prevent doing work after unbind thermal: rcar_thermal: Prevent hardware access during system suspend thermal: rcar_gen3_thermal: add R8A77980 support dt-bindings: thermal: rcar-gen3-thermal: document R8A77980 bindings thermal: add stm32 thermal driver dt-bindings: stm32-thermal: add binding documentation thermal: rcar_thermal: add R8A77970 support dt-bindings: thermal: rcar-thermal: document R8A77970 bindings thermal: rcar_thermal: fix duplicate IRQ request dt-bindings: thermal: rcar: Add device tree support for r8a7744 thermal/drivers/hisi: Add the dual clusters sensors for hi3660 thermal/drivers/hisi: Add more sensors channel thermal/drivers/hisi: Remove pointless irq field thermal/drivers/hisi: Use platform_get_irq_byname thermal/drivers/hisi: Replace macro name with relevant sensor location thermal/drivers/hisi: Add multiple sensors support thermal/drivers/hisi: Prepare to support multiple sensors thermal/drivers/hisi: Factor out the probe functions thermal/drivers/hisi: Set the thermal zone private data to the sensor pointer ...
2018-10-22thermal: Convert to using %pOFn instead of device_node.nameRob Herring
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-pm@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-08-24of: thermal: Allow multiple devices to share cooling mapViresh Kumar
A cooling map entry may now contain a list of phandles and their arguments representing multiple devices which share the trip point. This patch updates the thermal OF core to parse them properly. The trip point and contribution value is shared by multiple cooling devices now and so a new structure is created, struct __thermal_cooling_bind_param, which represents a cooling device and its min/max states and the existing struct __thermal_bind_params now contains an array of this new cooling device structure. Tested on Hikey960. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-08-20thermal: of-thermal: disable passive polling when thermal zone is disabledAnson Huang
When thermal zone is in passive mode, disabling its mode from sysfs is NOT taking effect at all, it is still polling the temperature of the disabled thermal zone and handling all thermal trips, it makes user confused. The disabling operation should disable the thermal zone behavior completely, for both active and passive mode, this patch clears the passive_delay when thermal zone is disabled and restores it when it is enabled. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-06-12Merge tag 'overflow-v4.18-rc1-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-30drivers: thermal: Update license to SPDX formatLina Iyer
Update licences format for core thermal files. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-12-27drivers: thermal: remove duplicate includesPravin Shedge
These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives. Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: Enhance thermal_zone_device_update for eventsSrinivas Pandruvada
Added one additional parameter to thermal_zone_device_update() to provide caller with an optional capability to specify reason. Currently this event is used by user space governor to trigger different processing based on event code. Also it saves an additional call to read temperature when the event is received. The following events are cuurently defined: - Unspecified event - New temperature sample - Trip point violated - Trip point changed - thermal device up and down - thermal device power capability changed Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27Thermal: of thermal: typo fixZhang Rui
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: of-thermal: Fix setting of set_emul_temp hookKeerthy
Currently thermal zone set_emul_temp is set unconditionally with of_thermal_set_emul_temp function. Set this only if the set_emul_temp hook is provided for thermal_zone_of_device_ops. This fixes emul_temp failures on platforms for which set_emul_temp hook is not populated. Fixes: "184a4bf623f (thermal: of: Extend current of-thermal.c code to allow setting emulated temp)" Suggested-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Conflicts: drivers/thermal/of-thermal.c Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: streamline get_trend callbacksSascha Hauer
The .get_trend callback in struct thermal_zone_device_ops has the prototype: int (*get_trend) (struct thermal_zone_device *, int, enum thermal_trend *); whereas the .get_trend callback in struct thermal_zone_of_device_ops has: int (*get_trend)(void *, long *); Streamline both prototypes and add the trip argument to the OF callback aswell and use enum thermal_trend * instead of an integer pointer. While the OF prototype may be the better one, this should be decided at framework level and not on OF level. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: of: implement .set_trips for device tree thermal zonesSascha Hauer
This patch implements .set_trips for device tree thermal zones. As the hardware-tracked trip points is supported by thermal core patch[0]. patch[0] "thermal: Add support for hardware-tracked trip points". Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-05-17thermal: of-thermal: allow setting trip_temp on hardwareWei Ni
In current of-thermal, the .set_trip_temp only support to set trip_temp for SW. But some sensors support to set trip_temp on hardware, so that can trigger interrupt, shutdown or any other events. This patch adds .set_trip_temp() callback in thermal_zone_of_device_ops{}, so that the sensor device can use it to set trip_temp on hardware. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: of: fix cleanup when building a thermal zoneUlises Brindis
of_node_put is iterating through all terms in the tbps array even though the bind has failed. We need to only iterate through the terms that have already passed the binding step. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ulises Brindis <brindisu@lab126.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-20thermal: of: add __init attributeJulia Lawall
Add __init attribute on a function that is only called from other __init functions and that is not inlined, at least with gcc version 4.8.4 on an x86 machine with allyesconfig. Currently, the function is put in the .text.unlikely segment. Declaring it as __init will cause it to be put in the .init.text and to disappear after initialization. The result of objdump -x on the function before the change is as follows: 0000000000000086 l F .text.unlikely 0000000000000739 thermal_of_build_thermal_zone And after the change it is as follows: 0000000000000000 l F .init.text 0000000000000734 thermal_of_build_thermal_zone Done with the help of Coccinelle. The semantic patch checks for local static non-init functions that are called from an __init function and are not called from any other function. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-03-09thermal: of-thermal: Add devm version of thermal_zone_of_sensor_registerLaxman Dewangan
Add resource managed version of thermal_zone_of_sensor_register() and thermal_zone_of_sensor_unregister(). This helps in reducing the code size in error path, remove of driver remove callbacks and making proper sequence for deallocations. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-09thermal: of: use for_each_available_child_of_node for child iteratorLaxman Dewangan
Use for_each_available_child_of_node() for iterating over each available child instead of iterating over each child and then checking their status. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-16thermal: of-thermal: Reduce log level for message when can't fine thermal zoneJiada Wang
Some systems register thermal zone by themself and don't need to have thermal zones node in DT. Therefore reduce the log level from ERROR to DEBUG when thermal zone node can't be find in of_thermal_destroy_zones(). Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-08-03thermal: consistently use int for temperaturesSascha Hauer
The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-05-11thermal: of-thermal: add support for reading coefficients propertyEduardo Valentin
In order to avoid having each driver adding their own specific DT property to specify slope and offset, this patch adds a basic coefficient reading from DT thermal zone node. Right now, as the thermal framework does not support multiple sensors, the current coefficients apply only to the only sensor in the thermal zone. The supported equation is a simple linear model: slope * <sensor reading> + offset. slope and offset are read from the coefficients DT property. In the same way as it is described in the DT thermal binding. So, as of today, the thermal framework will support only cases like: /* hotspot = 1 * adc + 6000 */ coefficients = <1 6000>; Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-04thermal: Default OF created trip points to writablePunit Agrawal
When registering a thermal zone from device tree, default the trip points to writable. By default, only the root user can change these. This allows the trip points to be tweaked after the system has booted. Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-04of: thermal: Introduce sustainable power for a thermal zonePunit Agrawal
Introduce an optional property called, sustainable-power, which represents the power (in mW) which the thermal zone can safely dissipate. If provided the property is parsed and associated with the thermal zone via the thermal zone parameters. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-04thermal: of: fix cooling device weights in device treeKapileshwar Singh
Currently you can specify the weight of the cooling device in the device tree but that information is not populated to the thermal_bind_params where the fair share governor expects it to be. The of thermal zone device doesn't have a thermal_bind_params structure and arguably it's better to pass the weight inside the thermal_instance as it is specific to the bind of a cooling device to a thermal zone parameter. Core thermal code is fixed to populate the weight in the instance from the thermal_bind_params, so platform code that was passing the weight inside the thermal_bind_params continue to work seamlessly. While we are at it, create a default value for the weight parameter for those thermal zones that currently don't define it and remove the hardcoded default in of-thermal. Cc: Zhang Rui <rui.zhang@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Peter Feuerer <peter@piie.net> Cc: Darren Hart <dvhart@infradead.org> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Kapileshwar Singh <kapileshwar.singh@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-21thermal: of: Enable thermal_zoneX when sensor is correctly addedLukasz Majewski
Up till now the thermal_zone mode was by default "disabled". With this patch the default behavior was changed to "enable". One can read the mode at: /sys/class/thermal/thermal_zone0/mode Tested-by: Javi Merino <javi.merino@arm.com> Reported-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-05thermal: of: Remove bogus type qualifier for of_thermal_get_trip_points()Geert Uytterhoeven
With gcc 4.1.2, 4.2, and 4.2.4 (4.4 and later are OK): drivers/thermal/thermal_core.h:110: warning: type qualifiers ignored on function return type Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: ce8be7785922de0e ("thermal: of: Extend of-thermal to export table of trip points") Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-12-08thermal: of: Extend current of-thermal.c code to allow setting emulated tempLukasz Majewski
Before this change it was only possible to set get_temp() and get_trend() methods to be used in the common code handling passing parameters via device tree to "cpu-thermal" CPU thermal zone device. Now it is possible to also set emulated value of temperature for debug purposes. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-12-08thermal: of: Extend of-thermal to export table of trip pointsLukasz Majewski
This patch extends the of-thermal.c to export trip points for a given thermal zone. Thermal drivers should use of_thermal_get_trip_points() method to get pointer to table of thermal trip points. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-12-08thermal: of: Rename struct __thermal_trip to struct thermal_tripLukasz Majewski
This patch changes name of struct __thermal_trip to thermal_trip and moves declaration of the latter to ./include/linux/thermal.h for better visibility. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-12-08thermal: of: Extend of-thermal.c to provide check if trip point is validLukasz Majewski
This patch extends the of-thermal.c to provide check if trip point is valid. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-12-08thermal: of: Extend of-thermal.c to provide number of trip pointsLukasz Majewski
This patch extends the of-thermal.c to provide information about number of available trip points. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-11-20thermal: of: improve of-thermal sensor registration APIEduardo Valentin
Different drivers request API extensions in of-thermal. For this reason, additional callbacks are required to fit the new drivers needs. The current API implementation expects the registering sensor driver to provide a get_temp and get_trend callbacks as function parameters. As the amount of callbacks is growing, this patch changes the existing implementation to use a .ops field to hold all the of thermal callbacks to sensor drivers. This patch also changes the existing of-thermal users to fit the new API design. No functional change is introduced in this patch. Cc: Alexandre Courbot <gnurou@gmail.com> Cc: devicetree@vger.kernel.org Cc: Grant Likely <grant.likely@linaro.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jean Delvare <jdelvare@suse.de> Cc: linux-kernel@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: lm-sensors@lm-sensors.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Mikko Perttunen <mikko.perttunen@kapsi.fi> Reviewed-by: Mikko Perttunen <mikko.perttunen@kapsi.fi> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-11-02thermal: fix multiple disbalanced device node countersVladimir Zapolskiy
Here on function return all temporarily used device nodes shall decrement their usage counter. The problems are found with device nodes allocated by for_each_child_of_node(), of_parse_phandle() and of_find_node_by_name(), fix all problems at once. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Cc: devicetree@vger.kernel.org Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-07-29thermal: add support to disable thermal zone from DTSLaxman Dewangan
Add support to check status of the thermal zone before registering the zone. This will help on disabling some non-existing thermal zone from the top level DTS file out of common dtsi thermalzone file. For example, we have 3 platforms almost same but thermal zones on this platform are little bit different. Platform 1 and 2 have three thermal zones and platform 3 has two thermal zones. To avoid duplication of the thermal zones entries on each DTS file of platforms,we created one common dtsi file for thermal zone and included this dtsi file from these 3 platform's top level dts file. On common thermal zone com dtsi file, all thermal zone are enabled and need to disable one of thermal zone on platform 3 dts file. For this, we just added entry status = "disabled" for that thermal zone on platform 3 dts file and along with this change to make it work. This way, we reuse the common file and control the enable/disable of the thermal zone from top level dts file. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-06-30thermal: Bind cooling devices with the correct argumentsPunit Agrawal
When binding cooling devices to thermal zones created from the device tree the minimum and maximum cooling states are in the wrong order leading to failure to bind. Fix the order of cooling states in the call to thermal_zone_bind_cooling_device to fix this. Cc:Zhang Rui <rui.zhang@intel.com> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-06-30thermal: Add braces around suspect codeStephen Boyd
It looks like this code is missing braces, otherwise the if statement shouldn't have been indented. Fix it. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-12-04thermal: introduce device tree parserEduardo Valentin
This patch introduces a device tree bindings for describing the hardware thermal behavior and limits. Also a parser to read and interpret the data and feed it in the thermal framework is presented. This patch introduces a thermal data parser for device tree. The parsed data is used to build thermal zones and thermal binding parameters. The output data can then be used to deploy thermal policies. This patch adds also documentation regarding this API and how to define tree nodes to use this infrastructure. Note that, in order to be able to have control on the sensor registration on the DT thermal zone, it was required to allow changing the thermal zone .get_temp callback. For this reason, this patch also removes the 'const' modifier from the .ops field of thermal zone devices. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 11:43:30 +0000