summaryrefslogtreecommitdiff
path: root/drivers/thermal/broadcom
AgeCommit message (Collapse)Author
2020-01-27thermal: brcmstb_thermal: Register different ops per processFlorian Fainelli
Since we do not have interrupts on BCM7216, we cannot have trip point crossing, the thermal subsystem expects us to provide a NULL set_trips operation in that case, so make it possible to provide per-process thermal_zone_of_device_ops Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200114190607.29339-7-f.fainelli@gmail.com
2020-01-27thermal: brcmstb_thermal: Restructure interrupt registrationFlorian Fainelli
If we are successful grabbing the interrupt resource, then register an interrupt handler, this makes it easier to support the interrupt as being optional, which is it for 7216. Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200114190607.29339-6-f.fainelli@gmail.com
2020-01-27thermal: brcmstb_thermal: Add 16nm process thermal parametersFlorian Fainelli
Match the 7216 compatible string in order to derive the correct 16nm process thermal parameters to obtain correct readings. Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200114190607.29339-5-f.fainelli@gmail.com
2020-01-27thermal: brcmstb_thermal: Prepare to support a different processFlorian Fainelli
The driver is currently assuming that it is operating with a 28nm process chip, which has a specific formula to convert temperature to a code and vice versa. Update the code to support providing two key values: offset and multiplier to derive the correct formulas. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200114190607.29339-3-f.fainelli@gmail.com
2020-01-27thermal: brcmstb_thermal: Do not use DT coefficientsFlorian Fainelli
At the time the brcmstb_thermal driver and its binding were merged, the DT binding did not make the coefficients properties a mandatory one, therefore all users of the brcmstb_thermal driver out there have a non functional implementation with zero coefficients. Even if these properties were provided, the formula used for computation is incorrect. The coefficients are entirely process specific (right now, only 28nm is supported) and not board or SoC specific, it is therefore appropriate to hard code them in the driver given the compatibility string we are probed with which has to be updated whenever a new process is introduced. We remove the existing coefficients definition since subsequent patches are going to add support for a new process and will introduce new coefficients as well. Fixes: 9e03cf1b2dd5 ("thermal: add brcmstb AVS TMON driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200114190607.29339-2-f.fainelli@gmail.com
2020-01-27thermal: Add BCM2711 thermal driverStefan Wahren
This adds the thermal sensor driver for the Broadcom BCM2711 SoC, which is placed on the Raspberry Pi 4. The driver only provides SoC temperature reading so far. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1578941778-23321-3-git-send-email-stefan.wahren@i2se.com
2019-07-12Merge tag 'driver-core-5.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...
2019-06-21thermal: bcm2835: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-pm@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14thermal: broadcom: Remove ACPI supportSrinath Mannam
Unlike DT framework, thermal-zones and its parameters can't be parsed using ACPI framework. So that ACPI support is removed in this driver. Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Reported-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-03-18thermal: bcm2835: Fix crash in bcm2835_thermal_debugfsPhil Elwell
"cat /sys/kernel/debug/bcm2835_thermal/regset" causes a NULL pointer dereference in bcm2835_thermal_debugfs. The driver makes use of the implementation details of the thermal framework to retrieve a pointer to its private data from a struct thermal_zone_device, and gets it wrong - leading to the crash. Instead, store its private data as the drvdata and retrieve the thermal_zone_device pointer from it. Fixes: bcb7dd9ef206 ("thermal: bcm2835: add thermal driver for bcm2835 SoC") Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-02-05thermal: broadcom: Add Stingray thermal driverPramod Kumar
Stingray SoC has six temperature sensor and those are configured, controlled and accessed to read temperature and update in DDR memory using m0 firmware. All six sensors has been given 4 bytes of memory in DDR to write temperature in millivolts. This thermal driver read temperature values from DDR because no direct access to sensors. Like this all temparature sensors are monitored and trips at critical temperature. If driver can't handle thermal runaways because of any unknown reason, then firmware in m0 Processor will handle. Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Vikram Prakash <vikram.prakash@broadcom.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-05Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal SoC updates from Eduardo Valentin: - Tegra DT binding documentation for Tegra194 - Armada now supports ap806 and cp110 - RCAR thermal now supports R8A774C0 and R8A77990 - Fixes on thermal_hwmon, IMX, generic-ADC, ST, RCAR, Broadcom, Uniphier, QCOM, Tegra, PowerClamp, and Armada thermal drivers. * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (22 commits) thermal: generic-adc: Fix adc to temp interpolation thermal: rcar_thermal: add R8A77990 support dt-bindings: thermal: rcar-thermal: add R8A77990 support thermal: rcar_thermal: add R8A774C0 support dt-bindings: thermal: rcar-thermal: add R8A774C0 support dt-bindings: cp110: document the thermal interrupt capabilities dt-bindings: ap806: document the thermal interrupt capabilities MAINTAINERS: thermal: add entry for Marvell MVEBU thermal driver thermal: armada: add overheat interrupt support thermal: st: fix Makefile typo thermal: uniphier: Convert to SPDX identifier thermal/intel_powerclamp: Change to use DEFINE_SHOW_ATTRIBUTE macro thermal: tegra: soctherm: Change to use DEFINE_SHOW_ATTRIBUTE macro dt-bindings: thermal: tegra-bpmp: Add Tegra194 support thermal: imx: save one condition block for normal case of nvmem initialization thermal: imx: fix for dependency on cpu-freq thermal: tsens: qcom: do not create duplicate regmap debugfs entries thermal: armada: Use PTR_ERR_OR_ZERO in armada_thermal_probe_legacy() dt-bindings: thermal: rcar-gen3-thermal: All variants use 3 interrupts thermal: broadcom: use devm_thermal_zone_of_sensor_register ...
2019-01-02thermal: broadcom: use devm_thermal_zone_of_sensor_registerJulia Lawall
Using devm_thermal_zone_of_sensor_register allows to simplify some error handling code, drop a label, and drop the remove function. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: bcm2835: enable hwmon explicitlyMatthias Brugger
By defaul of-based thermal driver do not enable hwmon. This patch does this explicitly, so that the temperature can be read through the common hwmon sysfs. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-05thermal: broadcom: constify thermal_zone_of_device_ops structureJulia Lawall
The thermal_zone_of_device_ops structure can be const as it is only passed as the last argument of thermal_zone_of_sensor_register and the corresponding parameter is declared as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-04thermal: bcm2835: Switch to SPDX identifierStefan Wahren
Adopt the SPDX license identifier headers to ease license compliance management. Cc: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-06-05thermal: bcm2835: Stop using printk format %pCrGeert Uytterhoeven
Printk format "%pCr" will be removed soon, as clk_get_rate() must not be called in atomic context. Replace it by printing the variable that already holds the clock rate. Note that calling clk_get_rate() is safe here, as the code runs in task context. Link: http://lkml.kernel.org/r/1527845302-12159-3-git-send-email-geert+renesas@glider.be To: Jia-Ju Bai <baijiaju1990@gmail.com> To: Jonathan Corbet <corbet@lwn.net> To: Michael Turquette <mturquette@baylibre.com> To: Stephen Boyd <sboyd@kernel.org> To: Zhang Rui <rui.zhang@intel.com> To: Eduardo Valentin <edubezval@gmail.com> To: Eric Anholt <eric@anholt.net> To: Stefan Wahren <stefan.wahren@i2se.com> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-doc@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2017-10-31thermal: add brcmstb AVS TMON driverBrian Norris
The AVS TMON core provides temperature readings, a pair of configurable high- and low-temperature threshold interrupts, and an emergency over-temperature chip reset. The driver utilizes the first two to provide temperature readings and high-temperature notifications to applications. The over-temperature reset is not exposed to applications; this reset threshold is critical to the system and should be set with care within the bootloader. Applications may choose to utilize the notification mechanism, the temperature reading mechanism (e.g., through polling), or both. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-08-11thermal: bcm2835: constify thermal_zone_of_device_ops structuresJulia Lawall
The thermal_zone_of_device_ops structure is only passed as the fourth argument to thermal_zone_of_sensor_register, which is declared as const. Thus the thermal_zone_of_device_ops structure itself can be const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-07-05Merge branch 'linus' of ↵Zhang Rui
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc
2017-06-30thermal: bcm2835: fix an error code in probe()Dan Carpenter
This causes a static checker because we're passing a valid pointer to PTR_ERR(). "err" is already the correct error code, so we can just delete this line. Fixes: bcb7dd9ef206 ("thermal: bcm2835: add thermal driver for bcm2835 SoC") Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-23thermal: broadcom: ns-thermal: default on iProc SoCsJon Mason
Tweak the Kconfig description to mention support for NSP and make the default on for iProc based platforms. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-04-23thermal: bcm2835: move to the broadcom subdirectoryRafał Miłecki
We already have 2 Broadcom drivers and at least 1 more is coming. This made us create broadcom subdirectory where bcm2835 should be moves now. Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-04-23thermal: broadcom: ns: specify myself as MODULE_AUTHORRafał Miłecki
Just in case someone uses modinfo to find (blame) me. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-04-06thermal: broadcom: add Northstar thermal driverRafał Miłecki
Northstar is a SoC family commonly used in home routers. This commit adds a driver for checking CPU temperature. As Northstar Plus seems to also have this IP block this new symbol gets ARCH_BCM_IPROC dependency. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 18:41:21 +0000