summaryrefslogtreecommitdiff
path: root/drivers/tee
AgeCommit message (Collapse)Author
2019-03-06Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "As usual, the drivers/tee and drivers/reset subsystems get merged here, with the expected set of smaller updates and some new hardware support. The tee subsystem now supports device drivers to be attached to a tee, the first example here is a random number driver with its implementation in the secure world. Three new power domain drivers get added for specific chip families: - Broadcom BCM283x chips (used in Raspberry Pi) - Qualcomm Snapdragon phone chips - Xilinx ZynqMP FPGA SoCs One new driver is added to talk to the BPMP firmware on NVIDIA Tegra210 Existing drivers are extended for new SoC variants from NXP, NVIDIA, Amlogic and Qualcomm" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits) tee: optee: update optee_msg.h and optee_smc.h to dual license tee: add cancellation support to client interface dpaa2-eth: configure the cache stashing amount on a queue soc: fsl: dpio: configure cache stashing destination soc: fsl: dpio: enable frame data cache stashing per software portal soc: fsl: guts: make fsl_guts_get_svr() static hwrng: make symbol 'optee_rng_id_table' static tee: optee: Fix unsigned comparison with less than zero hwrng: Fix unsigned comparison with less than zero tee: fix possible error pointer ctx dereferencing hwrng: optee: Initialize some structs using memset instead of braces tee: optee: Initialize some structs using memset instead of braces soc: fsl: dpio: fix memory leak of a struct qbman on error exit path clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static soc: qcom: llcc-slice: Fix typos qcom: soc: llcc-slice: Consolidate some code qcom: soc: llcc-slice: Clear the global drv_data pointer on error drivers: soc: xilinx: Add ZynqMP power domain driver firmware: xilinx: Add APIs to control node status/power dt-bindings: power: Add ZynqMP power domain bindings ...
2019-03-01Merge tag 'tee-misc-for-v5.1' of ↵Arnd Bergmann
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers OP-TEE driver - dual license for optee_msg.h and optee_smc.h Generic - add cancellation support to client interface * tag 'tee-misc-for-v5.1' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: optee: update optee_msg.h and optee_smc.h to dual license tee: add cancellation support to client interface Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-28tee: optee: update optee_msg.h and optee_smc.h to dual licenseJerome Forissier
The files optee_msg.h and optee_smc.h (under drivers/tee/optee) contain information originating from the OP-TEE OS project [1] [2], where the licensing terms are BSD 2-Clause. Therefore, apply a dual license to those files. Link: [1] https://github.com/OP-TEE/optee_os/blob/master/core/include/optee_msg.h Link: [2] https://github.com/OP-TEE/optee_os/blob/master/core/arch/arm/include/sm/optee_smc.h Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-02-28tee: add cancellation support to client interfaceIgor Opaniuk
Add support of cancellation request to the TEE kernel internal client interface. Can be used by software TPM drivers, that leverage TEE under the hood (for instance TPM2.0 mobile profile), for requesting cancellation of time-consuming operations (RSA key-pair generation etc.). Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-02-28tee: optee: add missing of_node_put after of_device_is_availableJulia Lawall
Add an of_node_put when a tested device node is not available. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ identifier f; local idexpression e; expression x; @@ e = f(...); ... when != of_node_put(e) when != x = e when != e = x when any if (<+...of_device_is_available(e)...+>) { ... when != of_node_put(e) ( return e; | + of_node_put(e); return ...; ) } // </smpl> Fixes: db878f76b9ff ("tee: optee: take DT status property into account") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-02-20tee: optee: Fix unsigned comparison with less than zeroYueHaibing
The return from the call to tee_client_invoke_func can be a negative error code however this is being assigned to an unsigned variable 'ret' hence the check is always false. Fix this by making 'ret' an int. Detected by Coccinelle ("Unsigned expression compared with zero: ret < 0") Fixes: c3fa24af9244 ("tee: optee: add TEE bus device enumeration support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-20tee: fix possible error pointer ctx dereferencingSumit Garg
Add check for valid ctx pointer and then only dereference ctx to configure supp_nowait flag. Fixes: 42bf4152d8a7 ("tee: add supp_nowait flag in tee_context struct") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-20tee: optee: Initialize some structs using memset instead of bracesNathan Chancellor
Clang warns: drivers/tee/optee/device.c:39:31: warning: suggest braces around initialization of subobject [-Wmissing-braces] struct tee_param param[4] = {0}; ^ {} drivers/tee/optee/device.c:92:48: warning: suggest braces around initialization of subobject [-Wmissing-braces] struct tee_ioctl_open_session_arg sess_arg = {0}; ^ {} 2 warnings generated. One way to fix these warnings is to add additional braces like Clang suggests; however, there has been a bit of push back from some maintainers, who just prefer memset as it is unambiguous, doesn't depend on a particular compiler version, and properly initializes all subobjects [1][2]. Do that here so there are no more warnings. [1]: https://lore.kernel.org/lkml/022e41c0-8465-dc7a-a45c-64187ecd9684@amd.com/ [2]: https://lore.kernel.org/lkml/20181128.215241.702406654469517539.davem@davemloft.net/ Fixes: c3fa24af9244 ("tee: optee: add TEE bus device enumeration support") Link: https://github.com/ClangBuiltLinux/linux/issues/370 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-01tee: optee: add TEE bus device enumeration supportSumit Garg
OP-TEE provides a pseudo TA to enumerate TAs which can act as devices/ services for TEE bus. So implement device enumeration using invoke function: PTA_CMD_GET_DEVICES provided by pseudo TA to fetch array of device UUIDs. Also register these enumerated devices with TEE bus as "optee-clntX" device. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> [jw: fix optee_enumerate_devices() with no devices found] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-02-01tee: add bus driver framework for TEE based devicesSumit Garg
Introduce a generic TEE bus driver concept for TEE based kernel drivers which would like to communicate with TEE based devices/services. Also add support in module device table for these new TEE based devices. In this TEE bus concept, devices/services are identified via Universally Unique Identifier (UUID) and drivers register a table of device UUIDs which they can support. So this TEE bus framework registers following apis: - match(): Iterates over the driver UUID table to find a corresponding match for device UUID. If a match is found, then this particular device is probed via corresponding probe api registered by the driver. This process happens whenever a device or a driver is registered with TEE bus. - uevent(): Notifies user-space (udev) whenever a new device is registered on this bus for auto-loading of modularized drivers. Also this framework allows for device enumeration to be specific to corresponding TEE implementation like OP-TEE etc. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-02-01tee: add supp_nowait flag in tee_context structSumit Garg
This flag indicates that requests in this context should not wait for tee-supplicant daemon to be started if not present and just return with an error code. It is needed for requests which should be non-blocking in nature like ones arising from TEE based kernel drivers or any in kernel api that uses TEE internal client interface. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-12-31Merge tag 'tee-subsys-optee-for-4.21' of ↵Olof Johansson
https://git.linaro.org/people/jens.wiklander/linux-tee into next/late OP-TEE dynamic shm log message Adds a log message in the OP-TEE driver to inform that dynamic shared memory is enabled. * tag 'tee-subsys-optee-for-4.21' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: optee: log message if dynamic shm is enabled Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-11tee: optee: log message if dynamic shm is enabledVictor Chong
When dynamic shared memory support is enabled in the OP-TEE Trusted OS, it doesn't mean that the driver supports it, which can confuse users during debugging. Log a message when dynamic shared memory is enabled in the driver, to let users know for sure. Suggested-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Victor Chong <victor.chong@linaro.org> Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-12-11tee: optee: avoid possible double list_del()Zhizhou Zhang
This bug occurs when: - a new request arrives, one thread(let's call it A) is pending in optee_supp_req() with req->busy is initial value false. - tee-supplicant is killed, then optee_supp_release() is called, this function calls list_del(&req->link), and set supp->ctx to NULL. And it also wake up process A. - process A continues, it firstly checks supp->ctx which is NULL, then checks req->busy which is false, at last run list_del(&req->link). This triggers double list_del() and results kernel panic. For solve this problem, we rename req->busy to req->in_queue, and associate it with state of whether req is linked to supp->reqs. So we can just only check req->in_queue to make decision calling list_del() or not. Signed-off-by: Zhizhou Zhang <zhizhouzhang@asrmicro.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-08-26Merge tag 'tee-drv-for-4.20' of ↵Olof Johansson
git://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers Misc enhancement for tee driver subsystem * Adds a kernel internal tee client interface allowing other drivers etc to access a TEE * OP-TEE driver takes DT status property into account * tag 'tee-drv-for-4.20' of git://git.linaro.org/people/jens.wiklander/linux-tee: tee: add kernel internal client interface tee: optee: take DT status property into account Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-24tee: add kernel internal client interfaceJens Wiklander
Adds a kernel internal TEE client interface to be used by other drivers. Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Tested-by: Sumit Garg <sumit.garg@linaro.org> Tested-by: Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-08-24tee: optee: take DT status property into accountArd Biesheuvel
DT nodes may have a 'status' property which, if set to anything other than 'ok' or 'okay', indicates to the OS that the DT node should be treated as if it was not present. So add that missing logic to the OP-TEE driver. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-08-23Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Some of the larger changes this merge window: - Removal of drivers for Exynos5440, a Samsung SoC that never saw widespread use. - Uniphier support for USB3 and SPI reset handling - Syste control and SRAM drivers and bindings for Allwinner platforms - Qualcomm AOSS (Always-on subsystem) reset controller drivers - Raspberry Pi hwmon driver for voltage - Mediatek pwrap (pmic) support for MT6797 SoC" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits) drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests soc: fsl: cleanup Kconfig menu soc: fsl: dpio: Convert DPIO documentation to .rst staging: fsl-mc: Remove remaining files staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl staging: fsl-dpaa2: eth: move generic FD defines to DPIO soc: fsl: qe: gpio: Add qe_gpio_set_multiple usb: host: exynos: Remove support for Exynos5440 clk: samsung: Remove support for Exynos5440 soc: sunxi: Add the A13, A23 and H3 system control compatibles reset: uniphier: add reset control support for SPI cpufreq: exynos: Remove support for Exynos5440 ata: ahci-platform: Remove support for Exynos5440 soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs soc: mediatek: pwrap: fix cipher init setting error dt-bindings: pwrap: mediatek: add pwrap support for MT6797 reset: uniphier: add USB3 core reset control dt-bindings: reset: uniphier: add USB3 core reset support ...
2018-06-22Merge tag 'drm-misc-next-2018-06-21' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.19: UAPI Changes: - Add writeback connector (Brian Starkey/Liviu Dudau) - Add "content type" property to HDMI connectors (Stanislav Lisovskiy) Cross-subsystem Changes: - some devicetree Docs update - fix compile breakage on ION due to the dma-buf cleanups (Christian König) Core Changes: - Reject over-sized allocation requests early (Chris Wilson) - gem-fb-helper: Always do implicit sync (Daniel Vetter) - dma-buf cleanups (Christian König) Driver Changes: - Fixes for the otm8009a panel driver (Philippe Cornu) - Add Innolux TV123WAM panel driver support (Sandeep Panda) - Move GEM BO to drm_framebuffer in few drivers (Daniel Stone) - i915 pinning improvements (Chris Wilson) - Stop consulting plane->fb/crtc in a few drivers (Ville Syrjälä) Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621105428.GA20795@juma
2018-06-20dma-buf: remove kmap_atomic interfaceChristian König
Neither used nor correctly implemented anywhere. Just completely remove the interface. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/226645/
2018-06-20tee: optee: making OPTEE_SHM_NUM_PRIV_PAGES configurable via KconfigSahil Malhotra
This change adds KCONFIG option to set number of pages out of whole shared memory to be used for OP-TEE driver private data structures. Signed-off-by: Sahil Malhotra <sahil.malhotra@nxp.com> [jw: fixing trivial merge conflict] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-06-19tee: replace getnstimeofday64() with ktime_get_real_ts64()Arnd Bergmann
The two do the same thing, but we want to have a consistent naming in the kernel. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-05-07tee: check shm references are consistent in offset/sizeEtienne Carriere
This change prevents userland from referencing TEE shared memory outside the area initially allocated by its owner. Prior this change an application could not reference or access memory it did not own but it could reference memory not explicitly allocated by owner but still allocated to the owner due to the memory allocation granule. Reported-by: Alexandre Jutras <alexandre.jutras@nxp.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-05-07tee: shm: fix use-after-free via temporarily dropped referenceJann Horn
Bump the file's refcount before moving the reference into the fd table, not afterwards. The old code could drop the file's refcount to zero for a short moment before calling get_file() via get_dma_buf(). This code can only be triggered on ARM systems that use Linaro's OP-TEE. Fixes: 967c9cca2cc5 ("tee: generic TEE subsystem") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-03-06tee: optee: report OP-TEE revision informationJérôme Forissier
When the driver initializes, report the following information about the OP-TEE OS: - major and minor version, - build identifier (if available). Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Reviewed-by: Matthias Brugger <mbruger@suse.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-03-06tee: optee: GET_OS_REVISION: document a2 as a build identifierJérôme Forissier
In the OPTEE_SMC_CALL_GET_OS_REVISION request, the previously reserved parameter a2 is now documented as being an optional build identifier (such as an SCM revision or commit ID, for instance). A new structure optee_smc_call_get_os_revision_result is introduced to be used when querying the secure OS version, instead of re-using the struct defined for OPTEE_SMC_CALLS_REVISION. Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Reviewed-by: Matthias Brugger <mbruger@suse.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-03-06tee: correct max value for id allocationPeng Fan
The privileged dev id range is [TEE_NUM_DEVICES / 2, TEE_NUM_DEVICES). The non-privileged dev id range is [0, TEE_NUM_DEVICES / 2). So when finding a slot for them, need to use different max value. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-01-11Merge tag 'tee-drv-dynamic-shm+fixes-for-v4.16' of ↵Olof Johansson
https://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers This pull request updates the previous tee-drv-dynamic-shm-for-v4.16 pull request with five new patches fixing review comments and errors. Apart from three small fixes there's two larger patches that in the end checks that memory to be registered really is normal cached memory. * tag 'tee-drv-dynamic-shm+fixes-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: shm: Potential NULL dereference calling tee_shm_register() tee: shm: don't put_page on null shm->pages tee: shm: make function __tee_shm_alloc static tee: optee: check type of registered shared memory tee: add start argument to shm_register callback Signed-off-by: Olof Johansson <olof@lixom.net>
2018-01-09tee: shm: Potential NULL dereference calling tee_shm_register()Dan Carpenter
get_user_pages_fast() can return zero in certain error paths. We should handle that or else it means we accidentally return ERR_PTR(0) which is NULL instead of an error pointer. The callers are not expecting that and will crash with a NULL dereference. Fixes: 033ddf12bcf5 ("tee: add register user memory") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-28tee: shm: don't put_page on null shm->pagesColin Ian King
In the case that shm->pages fails to allocate, the current exit error path will try to put_page on a null shm->pages and cause a null pointer dereference when accessing shm->pages[n]. Fix this by only performing the put_page and kfree on shm->pages if it is not null. Detected by CoverityScan, CID#1463283 ("Dereference after null check") Fixes: 033ddf12bcf5 ("tee: add register user memory") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-28tee: shm: make function __tee_shm_alloc staticColin Ian King
The function __tee_shm_alloc is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol '__tee_shm_alloc' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-28tee: optee: check type of registered shared memoryJens Wiklander
Checks the memory type of the pages to be registered as shared memory. Only normal cached memory is allowed. Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-28tee: add start argument to shm_register callbackJens Wiklander
Adds a start argument to the shm_register callback to allow the callback to check memory type of the passed pages. Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-21tee: optee: fix header dependenciesArnd Bergmann
The optee driver includes the header files in an unusual order, with asm/pgtable.h before the linux/*.h headers. For some reason this seems to trigger a build failure: drivers/tee/optee/call.c: In function 'optee_fill_pages_list': include/asm-generic/memory_model.h:64:14: error: implicit declaration of function 'page_to_section'; did you mean '__nr_to_section'? [-Werror=implicit-function-declaration] int __sec = page_to_section(__pg); \ drivers/tee/optee/call.c:494:15: note: in expansion of macro 'page_to_phys' optee_page = page_to_phys(*pages) + Let's just include linux/mm.h, which will then get the other header implicitly. Fixes: 3bb48ba5cd60 ("tee: optee: add page list manipulation functions") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-12-21Merge tag 'tee-drv-dynamic-shm-for-v4.16' of ↵Arnd Bergmann
https://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers Pull "tee dynamic shm for v4.16" from Jens Wiklander: This pull request enables dynamic shared memory support in the TEE subsystem as a whole and in OP-TEE in particular. Global Platform TEE specification [1] allows client applications to register part of own memory as a shared buffer between application and TEE. This allows fast zero-copy communication between TEE and REE. But current implementation of TEE in Linux does not support this feature. Also, current implementation of OP-TEE transport uses fixed size pre-shared buffer for all communications with OP-TEE OS. This is okay in the most use cases. But this prevents use of OP-TEE in virtualized environments, because: a) We can't share the same buffer between different virtual machines b) Physically contiguous memory as seen by VM can be non-contiguous in reality (and as seen by OP-TEE OS) due to second stage of MMU translation. c) Size of this pre-shared buffer is limited. So, first part of this pull request adds generic register/unregister interface to tee subsystem. The second part adds necessary features into OP-TEE driver, so it can use not only static pre-shared buffer, but whole RAM to communicate with OP-TEE OS. This change is backwards compatible allowing older secure world or user space to work with newer kernels and vice versa. [1] https://www.globalplatform.org/specificationsdevice.asp * tag 'tee-drv-dynamic-shm-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: shm: inline tee_shm_get_id() tee: use reference counting for tee_context tee: optee: enable dynamic SHM support tee: optee: add optee-specific shared pool implementation tee: optee: store OP-TEE capabilities in private data tee: optee: add registered buffers handling into RPC calls tee: optee: add registered shared parameters handling tee: optee: add shared buffer registration functions tee: optee: add page list manipulation functions tee: optee: Update protocol definitions tee: shm: add page accessor functions tee: shm: add accessors for buffer size and page offset tee: add register user memory tee: flexible shared memory pool creation
2017-12-21Merge tag 'tee-drv-async-supplicant-for-v4.16' of ↵Arnd Bergmann
https://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers Pull "Enable async communication with tee supplicant" from Jens Wiklander: This pull request enables asynchronous communication with TEE supplicant by introducing meta parameters in the user space API. The meta parameters can be used to tag requests with an id that can be matched against an asynchronous response as is done here in the OP-TEE driver. Asynchronous supplicant communication is needed by OP-TEE to implement GlobalPlatforms TEE Sockets API Specification v1.0.1. The specification is available at https://www.globalplatform.org/specificationsdevice.asp. This change is backwards compatible allowing older supplicants to work with newer kernels and vice versa. * tag 'tee-drv-async-supplicant-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee: optee: support asynchronous supplicant requests tee: add TEE_IOCTL_PARAM_ATTR_META tee: add tee_param_is_memref() for driver use
2017-12-15tee: shm: inline tee_shm_get_id()Volodymyr Babchuk
Now, when struct tee_shm is defined in public header, we can inline small getter functions like this one. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: use reference counting for tee_contextVolodymyr Babchuk
We need to ensure that tee_context is present until last shared buffer will be freed. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: optee: enable dynamic SHM supportVolodymyr Babchuk
Previous patches added various features that are needed for dynamic SHM. Dynamic SHM allows Normal World to share any buffers with OP-TEE. While original design suggested to use pre-allocated region (usually of 1M to 2M of size), this new approach allows to use all non-secure RAM for command buffers, RPC allocations and TA parameters. This patch checks capability OPTEE_SMC_SEC_CAP_DYNAMIC_SHM. If it was set by OP-TEE, then kernel part of OP-TEE will use kernel page allocator to allocate command buffers. Also it will set TEE_GEN_CAP_REG_MEM capability to tell userspace that it supports shared memory registration. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: optee: add optee-specific shared pool implementationVolodymyr Babchuk
This is simple pool that uses kernel page allocator. This pool can be used in case OP-TEE supports dynamic shared memory. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: optee: store OP-TEE capabilities in private dataVolodymyr Babchuk
Those capabilities will be used in subsequent patches. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: optee: add registered buffers handling into RPC callsVolodymyr Babchuk
With latest changes to OP-TEE we can use any buffers as a shared memory. Thus, it is possible for supplicant to provide part of own memory when OP-TEE asks to allocate a shared buffer. This patch adds support for such feature into RPC handling code. Now when OP-TEE asks supplicant to allocate shared buffer, supplicant can use TEE_IOC_SHM_REGISTER to provide such buffer. RPC handler is aware of this, so it will pass list of allocated pages to OP-TEE. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> [jw: fix parenthesis alignment in free_pages_list()] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: optee: add registered shared parameters handlingVolodymyr Babchuk
Now, when client applications can register own shared buffers in OP-TEE, we need to extend ABI for parameter passing to/from OP-TEE. So, if OP-TEE core detects that parameter belongs to registered shared memory, it will use corresponding parameter attribute. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: optee: add shared buffer registration functionsVolodymyr Babchuk
This change adds ops for shm_(un)register functions in tee interface. Client application can use these functions to (un)register an own shared buffer in OP-TEE address space. This allows zero copy data sharing between Normal and Secure Worlds. Please note that while those functions were added to optee code, it does not report to userspace that those functions are available. OP-TEE code does not set TEE_GEN_CAP_REG_MEM flag. This flag will be enabled only after all other features of dynamic shared memory will be implemented in subsequent patches. Of course user can ignore presence of TEE_GEN_CAP_REG_MEM flag and try do call those functions. This is okay, driver will register shared buffer in OP-TEE, but any attempts to use this shared buffer will fail. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: optee: add page list manipulation functionsVolodymyr Babchuk
These functions will be used to pass information about shared buffers to OP-TEE. ABI between Linux and OP-TEE is defined in optee_msg.h and optee_smc.h. optee_msg.h defines OPTEE_MSG_ATTR_NONCONTIG attribute for shared memory references and describes how such references should be passed. Note that it uses 64-bit page addresses even on 32 bit systems. This is done to support LPAE and to unify interface. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> [jw: replacing uint64_t with u64 in optee_fill_pages_list()] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: optee: Update protocol definitionsVolodymyr Babchuk
There were changes in REE<->OP-TEE ABI recently. Now ABI allows us to pass non-contiguous memory buffers as list of pages to OP-TEE. This can be achieved by using new parameter attribute OPTEE_MSG_ATTR_NONCONTIG. OP-TEE also is able to use all non-secure RAM for shared buffers. This new capability is enabled with OPTEE_SMC_SEC_CAP_DYNAMIC_SHM flag. This patch adds necessary definitions to the protocol definition files at Linux side. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: add register user memoryJens Wiklander
Added new ioctl to allow users register own buffers as a shared memory. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> [jw: moved tee_shm_is_registered() declaration] [jw: added space after __tee_shm_alloc() implementation] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: flexible shared memory pool creationJens Wiklander
Makes creation of shm pools more flexible by adding new more primitive functions to allocate a shm pool. This makes it easier to add driver specific shm pool management. Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com>
2017-11-29optee: support asynchronous supplicant requestsJens Wiklander
Adds support for asynchronous supplicant requests, meaning that the supplicant can process several requests in parallel or block in a request for some time. Acked-by: Etienne Carriere <etienne.carriere@linaro.org> Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (b2260 pager=y/n) Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-11-29tee: add TEE_IOCTL_PARAM_ATTR_METAJens Wiklander
Adds TEE_IOCTL_PARAM_ATTR_META which can be used to indicate meta parameters when communicating with user space. These meta parameters can be used by supplicant support multiple parallel requests at a time. Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 02:40:45 +0000