summaryrefslogtreecommitdiff
path: root/drivers/target
AgeCommit message (Collapse)Author
2012-03-22Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "This contains the usual set of updates and bugfixes to target-core + existing fabric module code, along with a handful of the patches destined for v3.3 stable. It also contains the necessary target-core infrastructure pieces required to run using tcm_qla2xxx.ko WWPNs with the new Qlogic Fibre Channel fabric module currently queued in target-pending/for-next-merge, and coming for round 2. The highlights for this series include: - Add target_submit_tmr() helper function for fabric task management (andy) - Convert tcm_fc to use target_submit_tmr() (andy) - Replace target core various cmd flags with a transport state (hch) - Convert loopback to use workqueue submission (hch) - Convert target core to use array_zalloc for tpg_lun_list (joern) - Convert target core to use array_zalloc for device_list (joern) - Add target core support for TMR_ABORT_TASK (nab) - Add target core se_sess->sess_kref + get/put helpers (nab) - Add target core se_node_acl->acl_kref for ->acl_free_comp usage (nab) - Convert iscsi-target to use target_put_session + sess_kref (nab) - Fix tcm_fc fc_exch memory leak in ft_send_resp_status (nab) - Fix ib_srpt srpt_handle_cmd send_ioctx->ioctx_kref leak on exception (nab) - Fix target core up handling of short INQUIRY buffers (roland) - Untangle target-core front-end and back-end meanings of max_sectors attribute (roland) - Set loopback residual field for SCSI commands (roland) - Fix target-core 16-bit target ports for SET TARGET PORT GROUPS emulation (roland) Thanks again to Andy, Christoph, Joern, Roland, and everyone who has contributed this round!" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (64 commits) ib_srpt: Fix srpt_handle_cmd send_ioctx->ioctx_kref leak on exception loopback: Fix transport_generic_allocate_tasks error handling iscsi-target: remove improper externs iscsi-target: Remove unused variables in iscsi_target_parameters.c target: remove obvious warnings target: Use array_zalloc for device_list target: Use array_zalloc for tpg_lun_list target: Fix sense code for unsupported SERVICE ACTION IN target: Remove hack to make READ CAPACITY(10) lie if thin provisioning is enabled target: Bump core version to v4.1.0-rc2-ml + fabric versions tcm_fc: Fix fc_exch memory leak in ft_send_resp_status target: Drop unused legacy target_core_fabric_ops API callers iscsi-target: Convert to use target_put_session + sess_kref target: Convert se_node_acl->acl_group removal to use ->acl_kref target: Add se_node_acl->acl_kref for ->acl_free_comp usage target: Add se_node_acl->acl_free_comp for NodeACL release path target: Add se_sess->sess_kref + get/put helpers target: Convert session_lock to irqsave target: Fix typo in drivers/target iscsi-target: Fix dynamic -> explict NodeACL pointer reference ...
2012-03-21Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates for 3.4 from James Morris: "The main addition here is the new Yama security module from Kees Cook, which was discussed at the Linux Security Summit last year. Its purpose is to collect miscellaneous DAC security enhancements in one place. This also marks a departure in policy for LSM modules, which were previously limited to being standalone access control systems. Chromium OS is using Yama, and I believe there are plans for Ubuntu, at least. This patchset also includes maintenance updates for AppArmor, TOMOYO and others." Fix trivial conflict in <net/sock.h> due to the jumo_label->static_key rename. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (38 commits) AppArmor: Fix location of const qualifier on generated string tables TOMOYO: Return error if fails to delete a domain AppArmor: add const qualifiers to string arrays AppArmor: Add ability to load extended policy TOMOYO: Return appropriate value to poll(). AppArmor: Move path failure information into aa_get_name and rename AppArmor: Update dfa matching routines. AppArmor: Minor cleanup of d_namespace_path to consolidate error handling AppArmor: Retrieve the dentry_path for error reporting when path lookup fails AppArmor: Add const qualifiers to generated string tables AppArmor: Fix oops in policy unpack auditing AppArmor: Fix error returned when a path lookup is disconnected KEYS: testing wrong bit for KEY_FLAG_REVOKED TOMOYO: Fix mount flags checking order. security: fix ima kconfig warning AppArmor: Fix the error case for chroot relative path name lookup AppArmor: fix mapping of META_READ to audit and quiet flags AppArmor: Fix underflow in xindex calculation AppArmor: Fix dropping of allowed operations that are force audited AppArmor: Add mising end of structure test to caps unpacking ...
2012-03-21Merge branch 'kmap_atomic' of git://github.com/congwang/linuxLinus Torvalds
Pull kmap_atomic cleanup from Cong Wang. It's been in -next for a long time, and it gets rid of the (no longer used) second argument to k[un]map_atomic(). Fix up a few trivial conflicts in various drivers, and do an "evil merge" to catch some new uses that have come in since Cong's tree. * 'kmap_atomic' of git://github.com/congwang/linux: (59 commits) feature-removal-schedule.txt: schedule the deprecated form of kmap_atomic() for removal highmem: kill all __kmap_atomic() [swarren@nvidia.com: highmem: Fix ARM build break due to __kmap_atomic rename] drbd: remove the second argument of k[un]map_atomic() zcache: remove the second argument of k[un]map_atomic() gma500: remove the second argument of k[un]map_atomic() dm: remove the second argument of k[un]map_atomic() tomoyo: remove the second argument of k[un]map_atomic() sunrpc: remove the second argument of k[un]map_atomic() rds: remove the second argument of k[un]map_atomic() net: remove the second argument of k[un]map_atomic() mm: remove the second argument of k[un]map_atomic() lib: remove the second argument of k[un]map_atomic() power: remove the second argument of k[un]map_atomic() kdb: remove the second argument of k[un]map_atomic() udf: remove the second argument of k[un]map_atomic() ubifs: remove the second argument of k[un]map_atomic() squashfs: remove the second argument of k[un]map_atomic() reiserfs: remove the second argument of k[un]map_atomic() ocfs2: remove the second argument of k[un]map_atomic() ntfs: remove the second argument of k[un]map_atomic() ...
2012-03-20Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU changes for v3.4 from Ingo Molnar. The major features of this series are: - making RCU more aggressive about entering dyntick-idle mode in order to improve energy efficiency - converting a few more call_rcu()s to kfree_rcu()s - applying a number of rcutree fixes and cleanups to rcutiny - removing CONFIG_SMP #ifdefs from treercu - allowing RCU CPU stall times to be set via sysfs - adding CPU-stall capability to rcutorture - adding more RCU-abuse diagnostics - updating documentation - fixing yet more issues located by the still-ongoing top-to-bottom inspection of RCU, this time with a special focus on the CPU-hotplug code path. * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits) rcu: Stop spurious warnings from synchronize_sched_expedited rcu: Hold off RCU_FAST_NO_HZ after timer posted rcu: Eliminate softirq-mediated RCU_FAST_NO_HZ idle-entry loop rcu: Add RCU_NONIDLE() for idle-loop RCU read-side critical sections rcu: Allow nesting of rcu_idle_enter() and rcu_idle_exit() rcu: Remove redundant check for rcu_head misalignment PTR_ERR should be called before its argument is cleared. rcu: Convert WARN_ON_ONCE() in rcu_lock_acquire() to lockdep rcu: Trace only after NULL-pointer check rcu: Call out dangers of expedited RCU primitives rcu: Rework detection of use of RCU by offline CPUs lockdep: Add CPU-idle/offline warning to lockdep-RCU splat rcu: No interrupt disabling for rcu_prepare_for_idle() rcu: Move synchronize_sched_expedited() to rcutree.c rcu: Check for illegal use of RCU from offlined CPUs rcu: Update stall-warning documentation rcu: Add CPU-stall capability to rcutorture rcu: Make documentation give more realistic rcutorture duration rcutorture: Permit holding off CPU-hotplug operations during boot rcu: Print scheduling-clock information on RCU CPU stall-warning messages ...
2012-03-20target: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-17loopback: Fix transport_generic_allocate_tasks error handlingNicholas Bellinger
This patch addresses a tcm_loop bug with transport_generic_allocate_tasks() return checking in tcm_loop_submission_work() where other non zero return codes (including -EBUSY for reservation conflicts) are incorrectly falling through to transport_generic_map_mem_to_cmd() -> transport_handle_cdb_direct(). This bug was introduced into target-pending/for-next-merge with the following for-3.4 commit: commit 16786454acec0e0e55e32d508b3058b32c1f23f3 Author: Christoph Hellwig <hch@infradead.org> Date: Thu Feb 2 17:04:42 2012 -0500 tcm_loop: switch to using transport_handle_cdb_direct Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-17iscsi-target: remove improper externsDan Carpenter
These externs aren't needed and Sparse complains about them. drivers/target/iscsi/iscsi_target_nodeattrib.c:52:12: warning: function 'iscsit_na_dataout_timeout' with external linkage has definition Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-15iscsi-target: Remove unused variables in iscsi_target_parameters.cJörn Engel
local_right_val was an obvious case, tmp_ptr is also write-only, but evades the compiler by being passed to simple_strtoul as char **endp. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-15target: remove obvious warningsJörn Engel
Get rid of a bunch of write-only variables. In a number of cases I suspect actual bugs to be present, so I left all of those for a second look. (nab: fix lio-core patch fuzz) Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-15target: Use array_zalloc for device_listJörn Engel
Turns an order-8 allocation into slab-sized ones, thereby preventing allocation failures with memory fragmentation. This likely saves memory as well, as the slab allocator can pack objects more tightly than the buddy allocator. (nab: Fix lio-core patch fuzz) Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-15target: Use array_zalloc for tpg_lun_listJörn Engel
Turns an order-10 allocation into slab-sized ones, thereby preventing allocation failures with memory fragmentation. This likely saves memory as well, as the slab allocator can pack objects more tightly than the buddy allocator. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-15target: Fix sense code for unsupported SERVICE ACTION INRoland Dreier
If we don't handle a given service action, we're supposed to return INVALID FIELD IN CDB, since we do handle the SERVICE ACTION IN opcode. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-15target: Remove hack to make READ CAPACITY(10) lie if thin provisioning is ↵Roland Dreier
enabled Remove the hack that has READ CAPACITY(10) return 0xFFFFFFFF as the number of sectors when thin provisioning is enabled. This is supposed to trigger the initiator to use READ CAPACITY(16) in this case so that it finds out about thin provisioning. But an initiator that cares about thin provisioning is going to ask anyway, and an initiator that doesn't know about READ CAPACITY(16) is going to get the wrong capacity. So just have READ CAPACITY(10) return the size it's supposed to. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-13iscsi-target: Fix reservation conflict -EBUSY response handling bugNicholas Bellinger
This patch addresses a iscsi-target specific bug related to reservation conflict handling in iscsit_handle_scsi_cmd() that has been causing reservation conflicts to complete and not fail as expected due to incorrect errno checking. The problem occured with the change to return -EBUSY from transport_generic_cmd_sequencer() -> transport_generic_allocate_tasks() failures, that broke iscsit_handle_scsi_cmd() checking for -EINVAL in order to invoke a non GOOD status response. This was manifesting itself as data corruption with legacy SPC-2 reservations, but also effects iscsi-target LUNs with SPC-3 persistent reservations. This bug was originally introduced in lio-core commit: commit 03e98c9eb916f3f0868c1dc344dde2a60287ff72 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Fri Nov 4 02:36:16 2011 -0700 target: Address legacy PYX_TRANSPORT_* return code breakage Reported-by: Martin Svec <martin.svec@zoner.cz> Cc: Martin Svec <martin.svec@zoner.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-13target: Fix compatible reservation handling (CRH=1) with legacy RESERVE/RELEASENicholas Bellinger
This patch addresses a bug with target_check_scsi2_reservation_conflict() return checking in target_scsi2_reservation_[reserve,release]() that was preventing CRH=1 operation from silently succeeding in the two special cases defined by SPC-3, and not failing with reservation conflict status when dealing with legacy RESERVE/RELEASE + active SPC-3 PR logic. Also explictly set cmd->scsi_status = SAM_STAT_RESERVATION_CONFLICT during the early non reservation holder failure from pr_ops->t10_seq_non_holder() check in transport_generic_cmd_sequencer() for fabrics that already expect it to be set. This bug was originally introduced in mainline commit: commit eacac00ce5bfde8086cd0615fb53c986f7f970fe Author: Christoph Hellwig <hch@infradead.org> Date: Thu Nov 3 17:50:40 2011 -0400 target: split core_scsi2_emulate_crh Reported-by: Martin Svec <martin.svec@zoner.cz> Cc: Martin Svec <martin.svec@zoner.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10target: Bump core version to v4.1.0-rc2-ml + fabric versionsNicholas Bellinger
Bump core version to v4.1.0-rc2-ml, and for versions from the following mainline fabric modules: loopback: v2.1-rc2 tcm_fc: v0.4 iscsi-target: v4.1.0-rc2 Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10tcm_fc: Fix fc_exch memory leak in ft_send_resp_statusNicholas Bellinger
This patch fixes a bug in tcm_fc where fc_exch memory from fc_exch_mgr->ep_pool is currently being leaked by ft_send_resp_status() usage. Following current code in ft_queue_status() response path, using lport->tt.seq_send() needs to be followed by a lport->tt.exch_done() in order to release fc_exch memory back into libfc_em kmem_cache. ft_send_resp_status() code is currently used in pre submit se_cmd ft_send_work() error exceptions, TM request setup exceptions, and main TM response callback path in ft_queue_tm_resp(). This bugfix addresses the leak in these cases. Cc: Mark D Rustad <mark.d.rustad@intel.com> Cc: Kiran Patil <kiran.patil@intel.com> Cc: Robert Love <robert.w.love@intel.com> Cc: Andy Grover <agrover@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10target: Drop unused legacy target_core_fabric_ops API callersNicholas Bellinger
This patch drops the following unused legacy API callers from target_core_fabric.h: *) TFO->fall_back_to_erl0() *) TFO->stop_session() *) TFO->sess_logged_in() *) TFO->is_state_remove() This patch also removes the stub usage in loopback, tcm_fc, iscsi_target, and ib_srpt fabric modules. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10iscsi-target: Convert to use target_put_session + sess_krefNicholas Bellinger
This patch converts iscsi-target session code to use se_sess->sess_kref counting for iscsi session shutdown. The following cases include: *) last iscsit_close_connection() shutdown path to invoke close session *) iscsit_logout_post_handler_closesession() for explict logout *) iscsit_free_session() caller for explict shutdown It also moves iscsit_stop_session() call from lio_tpg_close_session() into lio_tpg_shutdown_session() TFO callbacks to invoke an explict shutdown, and also changes iscsi_check_for_session_reinstatement() login code to use se_sess->sess_kref. (v2: Make iscsit_handle_time2retain_timeout() use target_put_session) Cc: Andy Grover <agrover@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10target: Convert se_node_acl->acl_group removal to use ->acl_krefNicholas Bellinger
This patch converts core_tpg_del_initiator_node_acl() shutdown from configfs context to use se_node_acl->acl_kref and ->acl_free_comp in order to wait for outstanding fabric callbacks to complete via transport_deregister_session() callbacks before waking ->acl_free_comp from the last ->acl_kref put. It also changes core_tpg_del_initiator_node_acl() to setup a local sess_list with target_get_session() + acl->acl_stop = 1 for active sessions that will be shutdown, and changes transport_deregister_session_configfs() to check for ->acl_stop usage. Cc: Roland Dreier <roland@purestorage.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Joern Engel <joern@logfs.org> Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10target: Add se_node_acl->acl_kref for ->acl_free_comp usageNicholas Bellinger
This patch adds se_node_acl->acl_kref for use with ->acl_free_comp during explict se_node_acl release. It adds kref_init() during se_node_acl setup, kref_get() during __transport_register_session() -> target_put_nacl() with existing transport_deregister_session() fabric callback usage. It also moves transport_free_session() to release *se_sess memory after target_put_nacl() execution in transport_deregister_session() Cc: Roland Dreier <roland@purestorage.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Joern Engel <joern@logfs.org> Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10target: Add se_node_acl->acl_free_comp for NodeACL release pathNicholas Bellinger
Add se_node_acl->acl_free_comp for NodeACL release path to wait for outstanding fabric session shutdown to complete in transport_deregister_session() before finishing NodeACL release from configfs process context. Also make transport_deregister_session() clear the comp_nacl bit to skip se_node_acl->acl_free_comp completion for dynamically generated NodeACL during fabric session shutdown. Cc: Roland Dreier <roland@purestorage.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Joern Engel <joern@logfs.org> Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10target: Add se_sess->sess_kref + get/put helpersNicholas Bellinger
This patch adds basic se_session->sess_kref and get/put helpers for fabric session reference counting. It sets the initial kref in transport_init_session() and adds a target_release_session() callback to invoke TFO->close_session() for final session shutdown. Cc: Roland Dreier <roland@purestorage.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Joern Engel <joern@logfs.org> Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10target: Convert session_lock to irqsaveNicholas Bellinger
This patch converts the remaining struct se_portal_group->session_lock usage to use irqsave+irqrestore to address the following warnings for hardware target mode interrupt context usage. This change generate other warnings for current iscsi-target mode still using ->session_lock with spin_lock_bh, which will need to be converted in a seperate patch. [ 492.480728] [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] [ 492.488194] 3.0.0+ #23 [ 492.490820] ------------------------------------------------------ [ 492.497704] sh/7162 [HC0[0]:SC0[2]:HE0:SE0] is trying to acquire: [ 492.504493] (&(&se_tpg->session_lock)->rlock){+.....}, at: [<ffffffffa022364d>] transport_deregister_session+0x2d/0x163 [target_core_mod] 492.518390] [ 492.518390] and this task is already holding: [ 492.524897] (&(&ha->hardware_lock)->rlock){-.-...}, at: [<ffffffffa00b9146>] qla_tgt_stop_phase1+0x5e/0x27e [qla2xxx] [ 492.536856] which would create a new lock dependency: [ 492.542481] (&(&ha->hardware_lock)->rlock){-.-...} -> (&(&se_tpg->session_lock)->rlock){+.....} [ 492.552321] [ 492.552321] but this new dependency connects a HARDIRQ-irq-safe lock: [ 492.561149] (&(&ha->hardware_lock)->rlock){-.-...} [ 492.566400] ... which became HARDIRQ-irq-safe at: [ 492.571841] [<ffffffff81064720>] __lock_acquire+0x68f/0x921 [ 492.578247] [<ffffffff81064eff>] lock_acquire+0xe0/0x10d [ 492.584367] [<ffffffff813a74c6>] _raw_spin_lock_irqsave+0x44/0x56 [ 492.591358] [<ffffffffa009b1be>] qla24xx_msix_default+0x5c/0x2aa [qla2xxx] [ 492.599227] [<ffffffff81088582>] handle_irq_event_percpu+0x5a/0x197 [ 492.606413] [<ffffffff810886fb>] handle_irq_event+0x3c/0x5c [ 492.612822] [<ffffffff8108a6dc>] handle_edge_irq+0xcc/0xf1 [ 492.619138] [<ffffffff810039b9>] handle_irq+0x83/0x8e [ 492.624971] [<ffffffff8100333e>] do_IRQ+0x48/0xaf [ 492.630413] [<ffffffff813a7cd3>] ret_from_intr+0x0/0x1a [ 492.636437] [<ffffffff81001dc1>] cpu_idle+0x5b/0x8d [ 492.642073] [<ffffffff81392709>] rest_init+0xad/0xb4 [ 492.647809] [<ffffffff81a1cbbc>] start_kernel+0x366/0x371 [ 492.654030] [<ffffffff81a1c2b1>] x86_64_start_reservations+0xb8/0xbc [ 492.661311] [<ffffffff81a1c3b6>] x86_64_start_kernel+0x101/0x110 [ 492.668204] [ 492.668205] to a HARDIRQ-irq-unsafe lock: [ 492.674324] (&(&se_tpg->session_lock)->rlock){+.....} [ 492.679862] ... which became HARDIRQ-irq-unsafe at: [ 492.685497] ... [<ffffffff8106479a>] __lock_acquire+0x709/0x921 [ 492.692209] [<ffffffff81064eff>] lock_acquire+0xe0/0x10d [ 492.698330] [<ffffffff813a75ed>] _raw_spin_lock_bh+0x31/0x40 [ 492.704836] [<ffffffffa021c208>] core_tpg_del_initiator_node_acl+0x89/0x336 [target_core_mod] [ 492.714546] [<ffffffffa02fb075>] tcm_qla2xxx_drop_nodeacl+0x20/0x2d [tcm_qla2xxx] [ 492.723087] [<ffffffffa02108d9>] target_fabric_nacl_base_release+0x22/0x24 [target_core_mod] [ 492.732698] [<ffffffffa01661c8>] config_item_release+0x7d/0xa3 [configfs] [ 492.740465] [<ffffffff811d48fe>] kref_put+0x43/0x4d [ 492.746101] [<ffffffffa0166149>] config_item_put+0x19/0x1b [configfs] [ 492.753481] [<ffffffffa0164987>] configfs_rmdir+0x1eb/0x258 [configfs] [ 492.760957] [<ffffffff810ecc54>] vfs_rmdir+0x79/0xd0 [ 492.766690] [<ffffffff810eec4a>] do_rmdir+0xc2/0x111 [ 492.772423] [<ffffffff810eecd0>] sys_rmdir+0x11/0x13 [ 492.778156] [<ffffffff813ae4d2>] system_call_fastpath+0x16/0x1b [ 492.784953] Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10target: Fix typo in drivers/targetMasanari Iida
Correct spelling "exeeds" to "exceeds" in iscsi/iscsi_target_nego.c Correct spelling "diabled" to "disabled" in target_core_configfs.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-08iscsi-target: Fix dynamic -> explict NodeACL pointer referenceNicholas Bellinger
This patch fixes a free after use in lio_target_make_nodeacl() where iscsi_node_acl was referenced from the original se_nacl_new allocation, instead of from core_tpg_add_initiator_node_acl() in the case of dynamic -> explict NodeACL conversion. Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25target: Allow target_submit_tmr interrupt context + pass ABORT_TASK tagNicholas Bellinger
This patch allows target_submit_tmr() to pass gfp_t for se_cmd->se_tmr_req allocation, and also set up se_cmd->se_tmr_req->ref_task_tag for passed tag with TMR_ABORT_TASK. Also update tcm_fc(fcoe) parameter usgae and add ref_task_tag FIXME for TMR_ABORT_TASK usage, Cc: Andy Grover <agrover@redhat.com> Cc: Kiran Patil <kiran.patil@intel.com> Cc: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25target: Push target_submit_tmr LUN lookup failure to system_wq contextNicholas Bellinger
In order to handle incoming target_submit_tmr() callers using interrupt context, use system_wq process context for transport_lookup_tmr_lun() failures to return TMR_LUN_DOES_NOT_EXIST status for fabric TM response. Cc: Andy Grover <agrover@redhat.com> Cc: Kiran Patil <kiran.patil@intel.com> Cc: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25tcm_fc: Handle target_submit_tmr allocation failureNicholas Bellinger
This patch makes ft_send_tm() handle target_submit_tmr() allocation failures via an ft_send_resp_code_and_free() w/ FCP_TMF_FAILED status. Cc: Andy Grover <agrover@redhat.com> Cc: Kiran Patil <kiran.patil@intel.com> Cc: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25target: Fix target_submit_tmr se_tmr_req allocation failuresNicholas Bellinger
This patch makes target_submit_tmr() se_tmr_req allocation occur before target_get_sess_cmd(), and changes target_submit_tmr() to return a failure w/ non zero status to the fabric caller upon core_tmr_alloc_req() failure. Cc: Andy Grover <agrover@redhat.com> Cc: Kiran Patil <kiran.patil@intel.com> Cc: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25target: Fix target_submit_tmr LUN lookup failuresNicholas Bellinger
This patch changes target_submit_tmr() LUN lookup failures to set response status TMR_LUN_DOES_NOT_EXIST and invoke TFO->queue_tm_rsp(), instead of sending CHECK_CONDITION status that can cause problems with Linux FCoE clients. Tested with tcm_fc ports and explict LUN_RESET lookup failures. Cc: Andy Grover <agrover@redhat.com> Cc: Kiran Patil <kiran.patil@intel.com> Cc: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25iscsi-target: Fix iscsit_alloc_buffs() failure casesNicholas Bellinger
Make iscsit_alloc_buffs() failure case for page_alloc_failed use correct __free_page() SGL pointer, and return -ENOMEM for iscsit_allocate_iovecs failure to push se_cmd->t_mem_sg release into iscsit_release_cmd() callback during iscsit_add_reject_from_cmd() connection reset. Also drop cmd->t_mem_sg = NULL assignment from page_alloc_failed failure case. Reported-by: Roland Dreier <roland@purestorage.com> Cc: Andy Grover <agrover@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25target: Fix 16-bit target ports for SET TARGET PORT GROUPS emulationRoland Dreier
The old code did (MSB << 8) & 0xff, which always evaluates to 0. Just use get_unaligned_be16() so we don't have to worry about whether our open-coded version is correct or not. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25target/pscsi: fix PHV_VIRUTAL_HOST_ID typoStefan Hajnoczi
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25target: Fix off-by-seven in target_report_lunsJörn Engel
cdb_offset is always equal to offset - 8, so remove that one. More importantly, the existing code only worked correct if se_cmd->data_length is a multiple of 8. Pass in a length of, say, 9 and we will happily overwrite 7 bytes of "unallocated" memory. Now, afaics this bug is currently harmless, as allocations will implicitly be padded to multiples of 8 bytes. But depending on such a fact wouldn't qualify as sound engineering practice. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25target: prevent NULL pointer dereference in target_report_lunsJörn Engel
transport_kmap_data_sg can return NULL. I never saw this trigger, but returning -ENOMEM seems better than a crash. Also removes a pointless case while at it. Signed-off-by: Joern Engel <joern@logfs.org> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25target: fix use after free in target_report_lunsJörn Engel
Fix possible NULL pointer dereference in target_report_luns failure path. Signed-off-by: Joern Engel <joern@logfs.org> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25tcm_loop: Set residual field for SCSI commandsRoland Dreier
If the target core signals an over- or under-run, tcm_loop should call scsi_set_resid() to tell the SCSI midlayer about the residual data length. The difference can be seen by doing something like strace -eioctl sg_raw -r 1024 /dev/sda 8 0 0 0 1 0 > /dev/null and looking at the "resid=" part of the SG_IO ioctl -- after this patch, the field is correctly reported as 512. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25target: Untangle front-end and back-end meanings of max_sectors attributeRoland Dreier
se_dev_attrib.max_sectors currently has two independent meanings: - It is reported in the block limits VPD page as the maximum transfer length, ie the largest IO that the front-end (fabric) can handle. Also the target core doesn't enforce this maximum transfer length. - It is used to hold the size of the largest IO that the back-end can handle, so we know when to split SCSI commands into multiple tasks. Fix this by adding a new se_dev_attrib.fabric_max_sectors to hold the maximum transfer length, and checking incoming IOs against that limit. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25target: Don't set WBUS16 or SYNC bits in INQUIRY responseRoland Dreier
SPC-4 says about the WBUS16 and SYNC bits: The meanings of these fields are specific to SPI-5 (see 6.4.3). For SCSI transport protocols other than the SCSI Parallel Interface, these fields are reserved. We don't have a SPI fabric module, so we should never set these bits. (The comment was misleading, since it only mentioned Sync but the actual code set WBUS16 too). Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25target: Set peripheral device type consistently in INQUIRY responseRoland Dreier
Current code sets the peripheral device type to 0x3f == "not present unknown" for virtual LUN 0 for standard INQUIRY commands, but leaves it as 0 == "connected direct access block" for VPD INQUIRY commands. This is just because the check for LUN 0 only happens in some code paths. Make our peripheral device type consistent by moving the LUN 0 check into the common emulate_inquiry() code. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25target: Fix up handling of short INQUIRY buffersRoland Dreier
If the initiator sends us an INQUIRY command with an allocation length that's shorter than what we want to return, we're simply supposed to truncate our response and return what the initiator gave us space for, without signaling any error. Current target code has various tests that don't fill out the full response if the buffer is too short and sometimes return errors incorrectly. Fix this up by allocating a bounce buffer for INQUIRY responses if we need to, ie if we have cmd->data_length too small as well as SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC set in cmd->se_cmd_flags -- for most fabrics, we always allocate at least a full page, but for tcm_loop we may have a small buffer coming directly from the SCSI stack. This lets us delete a lot of cmd->data_length checking, and also makes our INQUIRY handling correct per SPC in a lot more cases. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25target: Add TMR_ABORT_TASK task management supportNicholas Bellinger
This patch adds initial support for TMR_ABORT_TASK ops for se_cmd descriptors using se_sess->sess_cmd_list and se_cmd->cmd_kref counting. It will perform an explict abort for all outstanding se_cmd ops based upon tmr->ref_task_tag that have not been set CMD_T_COMPLETE. It will cancel se_cmd->work and wait for backing I/O to complete before attempting to send SAM_STAT_TASK_ABORTED and perform target_put_sess_cmd() to release the referenced descriptor. It also adds a CMD_T_ABORTED check into transport_complete_task() to catch the completion from backend I/O that has been aborted, and updates transport_wait_for_tasks() to allow CMD_T_ABORTED usage with core_tmr_abort_task() context. Reported-by: Roland Dreier <roland@purestorage.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25target: Make target_release_cmd_kref release on empty listNicholas Bellinger
This patch changes target_release_cmd_kref() to make TFO->release_cmd() call when list_empty(&se_cmd->se_cmd_list) is TRUE. This is required for TMR_ABORT_TASK operation where the referenced tag descriptor may have already been pulled of the session command list. Reported-by: Roland Dreier <roland@purestorage.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25target: Add SCF_ACK_KREF flag for acknowledgement krefNicholas Bellinger
When TARGET_SCF_ACK_KREF is in use with target_submit_cmd() for setting the extra acknowledgement reference to se_cmd->cmd_kref, go ahead and set SCF_ACK_KREF in order to be used later by abort task. Reported-by: Roland Dreier <roland@purestorage.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25target: Export transport_generic_request_failure symbolNicholas Bellinger
transport_generic_request_failure() is a wrapper around calling transport_send_check_condition_and_sense() that is required once an se_cmd->cmd_kref has been obtained via target_submit_cmd() -> target_get_sess_cmd(). tcm_qla2xxx currently requires this, and since it's necessary for other callers using target_submit_cmd() make it exportable now. Reported-by: Roland Dreier <roland@purestorage.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25target: Cleanup transport_kunmap_data_sg()Andy Grover
This code isn't broken per se, but it's scary to look at! It looks like in the t_data_nents==1 case we're doing both a kunmap and a vunmap, what's saving us is that t_data_vmap in this case is 0, so vunmap doesn't do anything. Return after kunmap, so the handling of the three cases does not overlap. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25tcm_loop: switch to using transport_handle_cdb_directChristoph Hellwig
Now that we use a workqueue for I/O submission there is no need to use transport_generic_handle_cdb_map any more. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25tcm_loop: defer all command submissions to workqueueChristoph Hellwig
Apply the qla2xxx model of submitting all commands from a workqueue. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25tcm_loop: kill tcm_loop_allocate_core_cmdChristoph Hellwig
This function makes little sense as a separate abstraction as it's deeply interwinded with the control flow of its only caller. Merged it into tcm_loop_queuecommand after factoring out a helper to convert the task attribute representation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 15:53:31 +0000