summaryrefslogtreecommitdiff
path: root/drivers/target
AgeCommit message (Collapse)Author
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "This is the set of patches which arrived too late to stabilise in -next for the first pull. It's really just an lpfc driver update and an assortment of minor fixes, all in drivers. The only core update is to the zone block device driver, which isn't the one most people use" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: Update lpfc version to 12.8.0.3 scsi: lpfc: Fix LUN loss after cable pull scsi: lpfc: Fix validation of bsg reply lengths scsi: lpfc: Fix retry of PRLI when status indicates its unsupported scsi: lpfc: Fix oops when unloading driver while running mds diags scsi: lpfc: Fix RSCN timeout due to incorrect gidft counter scsi: lpfc: Fix no message shown for lpfc_hdw_queue out of range value scsi: lpfc: Fix FCoE speed reporting scsi: lpfc: Add missing misc_deregister() for lpfc_init() scsi: lpfc: nvmet: Avoid hang / use-after-free again when destroying targetport scsi: scsi_transport_sas: Add spaces around binary operator "|" scsi: sd_zbc: Improve zone revalidation scsi: libfc: Free skb in fc_disc_gpn_id_resp() for valid cases scsi: fcoe: Memory leak fix in fcoe_sysfs_fcf_del() scsi: target: Make iscsit_register_transport() return void
2020-08-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc updates from Andrew Morton: - a few MM hotfixes - kthread, tools, scripts, ntfs and ocfs2 - some of MM Subsystems affected by this patch series: kthread, tools, scripts, ntfs, ocfs2 and mm (hofixes, pagealloc, slab-generic, slab, slub, kcsan, debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, mincore, sparsemem, vmalloc, kasan, pagealloc, hugetlb and vmscan). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits) mm: vmscan: consistent update to pgrefill mm/vmscan.c: fix typo khugepaged: khugepaged_test_exit() check mmget_still_valid() khugepaged: retract_page_tables() remember to test exit khugepaged: collapse_pte_mapped_thp() protect the pmd lock khugepaged: collapse_pte_mapped_thp() flush the right range mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible mm: thp: replace HTTP links with HTTPS ones mm/page_alloc: fix memalloc_nocma_{save/restore} APIs mm/page_alloc.c: skip setting nodemask when we are in interrupt mm/page_alloc: fallbacks at most has 3 elements mm/page_alloc: silence a KASAN false positive mm/page_alloc.c: remove unnecessary end_bitidx for [set|get]_pfnblock_flags_mask() mm/page_alloc.c: simplify pageblock bitmap access mm/page_alloc.c: extract the common part in pfn_to_bitidx() mm/page_alloc.c: replace the definition of NR_MIGRATETYPE_BITS with PB_migratetype_bits mm/shuffle: remove dynamic reconfiguration mm/memory_hotplug: document why shuffle_zone() is relevant mm/page_alloc: remove nr_free_pagecache_pages() mm: remove vm_total_pages ...
2020-08-07mm, treewide: rename kzfree() to kfree_sensitive()Waiman Long
As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h] [akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-04scsi: target: Make iscsit_register_transport() return voidMax Gurtovoy
This function always returns 0. We can make it return void to simplify the code. Also, no caller ever checks the return value of this function. Link: https://lore.kernel.org/r/20200803150008.83920-1-maxg@mellanox.com Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-28scsi: target: tcmu: Make TMR notification optionalBodo Stroesser
Add "tmr_notification" configfs attribute to tcmu devices. If the default value 0 is used, tcmu only removes aborted commands from qfull_queue. If user changes tmr_notification to 1, additionally TMR notifications will be written to the cmd ring. Link: https://lore.kernel.org/r/20200726153510.13077-9-bstroesser@ts.fujitsu.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-28scsi: target: tcmu: Implement tmr_notify callbackBodo Stroesser
This patch implements the tmr_notify callback for tcmu. When the callback is called, tcmu checks the list of aborted commands it received as parameter: - aborted commands in the qfull_queue are removed from the queue and target_complete_command is called - from the cmd_ids of aborted commands currently uncompleted in cmd ring it creates a list of aborted cmd_ids. Finally a TMR notification is written to cmd ring containing TMR type and cmd_id list. If there is no space in ring, the TMR notification is queued on a TMR specific queue. The TMR specific queue 'tmr_queue' can be seen as a extension of the cmd ring. At the end of each iexecution of tcmu_complete_commands() we check whether tmr_queue contains TMRs and try to move them onto the ring. If tmr_queue is not empty after that, we don't call run_qfull_queue() because commands must not overtake TMRs. This way we guarantee that cmd_ids in TMR notification received by userspace either match an active, not yet completed command or are no longer valid due to userspace having complete some cmd_ids meanwhile. New commands that were assigned to an aborted cmd_id will always appear on the cmd ring _after_ the TMR. Link: https://lore.kernel.org/r/20200726153510.13077-8-bstroesser@ts.fujitsu.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-28scsi: target: tcmu: Fix and simplify timeout handlingBodo Stroesser
During cmd timeout handling in check_timedout_devices(), due to a race, it can happen that tcmu_set_next_deadline() does not start a timer as expected: 1) Either tcmu_check_expired_ring_cmd() checks the inflight_queue or tcmu_check_expired_queue_cmd() checks the qfull_queue while jiffies has the value X 2) At the end of the check the queue contains one remaining command with deadline X (time_after(X, X) is false and thus the command is not handled as being timed out). 3) After tcmu_check_expired_xxxxx_cmd() a timer interrupt happens and jiffies is incremented to X+1. 4) Now tcmu_set_next_deadline() is called, but it skips the command, since time_after(X+1, X) is true. Therefore tcmu_set_next_deadline() finds no new deadline and stops the timer, which it shouldn't. Since commands that time out are removed from inflight_queue or qfull_queue, we don't need the check with time_after() in tcmu_set_next_deadline() but can use the deadline from the first cmd in the queue. Additionally, replace the remaining time_after() calls in tcmu_check_expired_xxxxx_cmd() with time_after_eq(), because it is not useful to set the timeout to deadline but then check for jiffies being greater than deadline. Simplify the end of tcmu_handle_completions() and change the check for no more pending commands from mb->cmd_tail == mb->cmd_head to idr_is_empty(&udev->commands) because the old check doesn't work correctly if paddings or in the future TMRs are in the ring. Finally tcmu_set_next_deadline() was shifted in the source as preparation for later implementation of tmr_notify callback. Link: https://lore.kernel.org/r/20200726153510.13077-7-bstroesser@ts.fujitsu.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-28scsi: target: tcmu: Factor out new helper ring_insert_paddingBodo Stroesser
The new helper ring_insert_padding is split off from and then called by queue_cmd_ring. It inserts a padding if necessary. The new helper will in a subsequent patch be used during writing of TMR notifications to command ring. Link: https://lore.kernel.org/r/20200726153510.13077-6-bstroesser@ts.fujitsu.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-28scsi: target: tcmu: Do not queue aborted commandsBodo Stroesser
If tcmu receives an already aborted command, tcmu_queue_cmd() should reject it. Link: https://lore.kernel.org/r/20200726153510.13077-5-bstroesser@ts.fujitsu.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-28scsi: target: tcmu: Use priv pointer in se_cmdBodo Stroesser
We initialize and clean up the se_cmd's priv pointer under cmd_ring_lock to point to the corresponding tcmu_cmd. In the patch that implements tmr_notify callback in tcmu we will use the priv pointer. Link: https://lore.kernel.org/r/20200726153510.13077-4-bstroesser@ts.fujitsu.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-28scsi: target: Add tmr_notify backend functionBodo Stroesser
Target core is modified to call an optional backend callback function if a TMR is received or commands are aborted implicitly after a PR command was received. The backend function takes as parameters the se_dev, the type of the TMR, and the list of aborted commands. If no commands were aborted, an empty list is supplied. Link: https://lore.kernel.org/r/20200726153510.13077-3-bstroesser@ts.fujitsu.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-28scsi: target: Modify core_tmr_abort_task()Bodo Stroesser
This patch modifies core_tmr_abort_task() to use same looping and locking scheme as core_tmr_drain_state_list() does. This frees the state_list element in se_cmd for later use by tmr notification handling. Note: __target_check_io_state() now is called with param 0 instead of dev->dev_attrib.emulate_tas, because tas is not relevant since we always get ABRT on same session like the aborted command. Link: https://lore.kernel.org/r/20200726153510.13077-2-bstroesser@ts.fujitsu.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-28scsi: target: iscsi: Fix inconsistent debug messageHou Pu
Commit 25cdda95fda7 ("iscsi-target: Fix initial login PDU asynchronous socket close OOPs") changed the return value of __iscsi_target_sk_check_close(). However, pr_debug is still printing FALSE when returning TRUE which is a little confusing. Link: https://lore.kernel.org/r/20200716100212.4237-3-houpu@bytedance.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Hou Pu <houpu@bytedance.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-28scsi: target: iscsi: Fix login error when receivingHou Pu
iscsi_target_sk_data_ready() could be invoked indirectly by iscsi_target_do_login_rx() from the workqueue like this: iscsi_target_do_login_rx() iscsi_target_do_login() iscsi_target_do_tx_login_io() iscsit_put_login_tx() iscsi_login_tx_data() tx_data() sock_sendmsg_nosec() tcp_sendmsg() release_sock() sk_backlog_rcv() tcp_v4_do_rcv() tcp_data_ready() iscsi_target_sk_data_ready() At that time LOGIN_FLAGS_READ_ACTIVE is not cleared and iscsi_target_sk_data_ready will not read data from the socket. Some iscsi initiators (libiscsi) will wait forever for a reply. LOGIN_FLAGS_READ_ACTIVE should be cleared early just after doing the receive and before writing to the socket in iscsi_target_do_login_rx. Unfortunately, LOGIN_FLAGS_READ_ACTIVE is also used by sk_state_change to do login cleanup if a socket was closed at login time. It is supposed to be cleared after the login PDU is successfully processed and replied. Introduce another flag, LOGIN_FLAGS_WRITE_ACTIVE, to cover the transmit part. Link: https://lore.kernel.org/r/20200716100212.4237-2-houpu@bytedance.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Hou Pu <houpu@bytedance.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-13scsi: target: Remove unused variable 'tpg'Wei Yongjun
Gcc reports warning as follows: drivers/target/target_core_pr.c:1162:26: warning: variable 'tpg' set but not used [-Wunused-but-set-variable] 1162 | struct se_portal_group *tpg; | ^~~ After commit 63c9ffe473d3 ("scsi: target: Check enforce_pr_isids during registration"), 'tpg' is never used. Remove it to avoid build warning. Link: https://lore.kernel.org/r/20200709114636.69256-1-weiyongjun1@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08scsi: target: cxgbit: Remove tx flow control codeVarun Prakash
Firmware does tx flow control so remove tx flow control code from the driver. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08scsi: target: cxgbit: Check connection state before issuing hardware commandVarun Prakash
Current code does not check connection state before issuing header/data digest offload and DDP page size setup hardware command. Add a connection state check to issue hardware command only if connection is in established state. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08scsi: target: Handle short iSIDsMike Christie
SPC4 has: The first ISCSI INITIATOR SESSION ID field byte containing an ASCII null character terminates the ISCSI INITIATOR SESSION ID field without regard for the specified length of the iSCSI TransportID or the contents of the ADDITIONAL LENGTH field. ---------------------------------------- which sounds like we can get an iSID shorter than 12 chars. SPC and the iSCSI RFC do not say how to handle that case other than just cutting off the iSID. This patch just makes sure that if we get an iSID like that, we only copy/send that string. There is no OS that does this right now, so there was no test case. I did test with sg utils to check it works as expected and nothing breaks. Link: https://lore.kernel.org/r/1593654203-12442-8-git-send-email-michael.christie@oracle.com Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08scsi: target: Fix iscsi transport id buf len calculationMike Christie
The isid returned to the initiator is in string format which is 12 bytes. We also only add 1 terminating NULL and not one after the initiator name and another one after the isid. Link: https://lore.kernel.org/r/1593654203-12442-7-git-send-email-michael.christie@oracle.com Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08scsi: target: Fix iscsi transport id buffer setupMike Christie
This fixes the following bugs with the transport id setup for iscsi: 1. Incorrectly adding NULL after initiator name for TPID format 1. 2. For TPID format 1 buffer setup we are doing off+len, off++ and then also len+=some_value. This results in the isid going past buffer boundaries when we then do buf[off+len] 3. The pr_reg_isid is the isid in string format which is 12 bytes, but we are only copying 6 bytes. Link: https://lore.kernel.org/r/1593654203-12442-6-git-send-email-michael.christie@oracle.com Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08scsi: target: Fix iscsi transport id parsingMike Christie
The length passed in the ADDITIONAL LENGTH field includes padding and the terminating NULL for the last field (name or isid depending on the format), so we should not also try to calculate that and then double add that to the returned length. Link: https://lore.kernel.org/r/1593654203-12442-5-git-send-email-michael.christie@oracle.com Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08scsi: target: Fix crash during SPEC_I_PT handlingMike Christie
__core_scsi3_add_registration clears the t10_pr_registration pr_reg_deve and does a core_scsi3_lunacl_undepend_item which does an undepend and also does a kref_put from the get done in __core_scsi3_alloc_registration. So when we get to the bottom of core_scsi3_decode_spec_i_port the pr_reg_deve is NULL and we crash when trying to access the local_pr_reg's pr_reg_deve. We've also done an extra undepend for local_pr_reg and if we didn't crash on the NULL we would have done an extra kref_put too. This patch has us do a core_scsi3_lunacl_depend_item for local_pr_reg and then let __core_scsi3_add_registration handle the cleanup for the pr_reg_deve. We then just skip the undepend for the acl and tpg for the local pr_reg. The error path then works in a similar way, but we always do the core_scsi3_lunacl_undepend_item since we never call __core_scsi3_add_registration in that code path. Link: https://lore.kernel.org/r/1593654203-12442-4-git-send-email-michael.christie@oracle.com Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08scsi: target: Fix xcopy sess release leakMike Christie
transport_init_session can allocate memory via percpu_ref_init, and target_xcopy_release_pt never frees it. This adds a transport_uninit_session function to handle cleanup of resources allocated in the init function. Link: https://lore.kernel.org/r/1593654203-12442-3-git-send-email-michael.christie@oracle.com Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08scsi: target: Check enforce_pr_isids during registrationMike Christie
Move the check for enforce_pr_isids to the registration code where we can fail at the time an initiator tries to register a path without an isid. In its current place in __core_scsi3_locate_pr_reg, it is too late because it can be registered and be reported in PR in commands and it is stuck in this state because we cannot unregister it. [mkp: applied by hand] Link: https://lore.kernel.org/r/1593654203-12442-2-git-send-email-michael.christie@oracle.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-29scsi: target: tcmu: Fix crash on ARM during cmd completionBodo Stroesser
If tcmu_handle_completions() has to process a padding shorter than sizeof(struct tcmu_cmd_entry), the current call to tcmu_flush_dcache_range() with sizeof(struct tcmu_cmd_entry) as length param is wrong and causes crashes on e.g. ARM, because tcmu_flush_dcache_range() in this case calls flush_dcache_page(vmalloc_to_page(start)); with start being an invalid address above the end of the vmalloc'ed area. The fix is to use the minimum of remaining ring space and sizeof(struct tcmu_cmd_entry) as the length param. The patch was tested on kernel 4.19.118. See https://bugzilla.kernel.org/show_bug.cgi?id=208045#c10 Link: https://lore.kernel.org/r/20200629093756.8947-1-bstroesser@ts.fujitsu.com Tested-by: JiangYu <lnsyyj@hotmail.com> Acked-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-19scsi: target: tcmu: Fix crash in tcmu_flush_dcache_range on ARMBodo Stroesser
This patch fixes the following crash (see https://bugzilla.kernel.org/show_bug.cgi?id=208045) Process iscsi_trx (pid: 7496, stack limit = 0x0000000010dd111a) CPU: 0 PID: 7496 Comm: iscsi_trx Not tainted 4.19.118-0419118-generic #202004230533 Hardware name: Greatwall QingTian DF720/F601, BIOS 601FBE20 Sep 26 2019 pstate: 80400005 (Nzcv daif +PAN -UAO) pc : flush_dcache_page+0x18/0x40 lr : is_ring_space_avail+0x68/0x2f8 [target_core_user] sp : ffff000015123a80 x29: ffff000015123a80 x28: 0000000000000000 x27: 0000000000001000 x26: ffff000023ea5000 x25: ffffcfa25bbe08b8 x24: 0000000000000078 x23: ffff7e0000000000 x22: ffff000023ea5001 x21: ffffcfa24b79c000 x20: 0000000000000fff x19: ffff7e00008fa940 x18: 0000000000000000 x17: 0000000000000000 x16: ffff2d047e709138 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: ffff2d047fbd0a40 x11: 0000000000000000 x10: 0000000000000030 x9 : 0000000000000000 x8 : ffffc9a254820a00 x7 : 00000000000013b0 x6 : 000000000000003f x5 : 0000000000000040 x4 : ffffcfa25bbe08e8 x3 : 0000000000001000 x2 : 0000000000000078 x1 : ffffcfa25bbe08b8 x0 : ffff2d040bc88a18 Call trace: flush_dcache_page+0x18/0x40 is_ring_space_avail+0x68/0x2f8 [target_core_user] queue_cmd_ring+0x1f8/0x680 [target_core_user] tcmu_queue_cmd+0xe4/0x158 [target_core_user] __target_execute_cmd+0x30/0xf0 [target_core_mod] target_execute_cmd+0x294/0x390 [target_core_mod] transport_generic_new_cmd+0x1e8/0x358 [target_core_mod] transport_handle_cdb_direct+0x50/0xb0 [target_core_mod] iscsit_execute_cmd+0x2b4/0x350 [iscsi_target_mod] iscsit_sequence_cmd+0xd8/0x1d8 [iscsi_target_mod] iscsit_process_scsi_cmd+0xac/0xf8 [iscsi_target_mod] iscsit_get_rx_pdu+0x404/0xd00 [iscsi_target_mod] iscsi_target_rx_thread+0xb8/0x130 [iscsi_target_mod] kthread+0x130/0x138 ret_from_fork+0x10/0x18 Code: f9000bf3 aa0003f3 aa1e03e0 d503201f (f9400260) ---[ end trace 1e451c73f4266776 ]--- The solution is based on patch: "scsi: target: tcmu: Optimize use of flush_dcache_page" which restricts the use of tcmu_flush_dcache_range() to addresses from vmalloc'ed areas only. This patch now replaces the virt_to_page() call in tcmu_flush_dcache_range() - which is wrong for vmalloced addrs - by vmalloc_to_page(). The patch was tested on ARM with kernel 4.19.118 and 5.7.2 Link: https://lore.kernel.org/r/20200618131632.32748-3-bstroesser@ts.fujitsu.com Tested-by: JiangYu <lnsyyj@hotmail.com> Tested-by: Daniel Meyerholt <dxm523@gmail.com> Acked-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-19scsi: target: tcmu: Optimize use of flush_dcache_pageBodo Stroesser
(scatter|gather)_data_area() need to flush dcache after writing data to or before reading data from a page in uio data area. The two routines are able to handle data transfer to/from such a page in fragments and flush the cache after each fragment was copied by calling the wrapper tcmu_flush_dcache_range(). That means: 1) flush_dcache_page() can be called multiple times for the same page. 2) Calling flush_dcache_page() indirectly using the wrapper does not make sense, because each call of the wrapper is for one single page only and the calling routine already has the correct page pointer. Change (scatter|gather)_data_area() such that, instead of calling tcmu_flush_dcache_range() before/after each memcpy, it now calls flush_dcache_page() before unmapping a page (when writing is complete for that page) or after mapping a page (when starting to read the page). After this change only calls to tcmu_flush_dcache_range() for addresses in vmalloc'ed command ring are left over. The patch was tested on ARM with kernel 4.19.118 and 5.7.2 Link: https://lore.kernel.org/r/20200618131632.32748-2-bstroesser@ts.fujitsu.com Tested-by: JiangYu <lnsyyj@hotmail.com> Tested-by: Daniel Meyerholt <dxm523@gmail.com> Acked-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-19scsi: target: tcmu: Remove unnecessary bit TCMU_CMD_BIT_INFLIGHTBodo Stroesser
Since commit 61fb24822166 ("scsi: target: tcmu: Userspace must not complete queued commands") tcmu_cmd bit TCMU_CMD_BIT_INFLIGHT is set but never checked. So we can remove it safely. [mkp: fixed Mike's email address] Link: https://lore.kernel.org/r/20200619173806.5016-1-bstroesser@ts.fujitsu.com Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Acked-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-13Merge tag 'kbuild-v5.8-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - fix build rules in binderfs sample - fix build errors when Kbuild recurses to the top Makefile - covert '---help---' in Kconfig to 'help' * tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: treewide: replace '---help---' in Kconfig files with 'help' kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables samples: binderfs: really compile this sample and fix build issues
2020-06-13Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "This is the set of changes collected since just before the merge window opened. It's mostly minor fixes in drivers. The one non-driver set is the three optical disk (sr) changes where two are error path fixes and one is a helper conversion. The big driver change is the hpsa compat_alloc_userspace rework by Al so he can kill the remaining user. This has been tested and acked by the maintainer" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits) scsi: acornscsi: Fix an error handling path in acornscsi_probe() scsi: storvsc: Remove memset before memory freeing in storvsc_suspend() scsi: cxlflash: Remove an unnecessary NULL check scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM scsi: sr: Fix sr_probe() missing deallocate of device minor scsi: sr: Fix sr_probe() missing mutex_destroy scsi: st: Convert convert get_user_pages() --> pin_user_pages() scsi: target: Rename target_setup_cmd_from_cdb() to target_cmd_parse_cdb() scsi: target: Fix NULL pointer dereference scsi: target: Initialize LUN in transport_init_se_cmd() scsi: target: Factor out a new helper, target_cmd_init_cdb() scsi: hpsa: hpsa_ioctl(): Tidy up a bit scsi: hpsa: Get rid of compat_alloc_user_space() scsi: hpsa: Don't bother with vmalloc for BIG_IOCTL_Command_struct scsi: hpsa: Lift {BIG_,}IOCTL_Command_struct copy{in,out} into hpsa_ioctl() scsi: ufs: Remove redundant urgent_bkop_lvl initialization scsi: ufs: Don't update urgent bkops level when toggling auto bkops scsi: qedf: Remove redundant initialization of variable rc scsi: mpt3sas: Fix memset() in non-RDPQ mode scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj ...
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-09scsi: target: Rename target_setup_cmd_from_cdb() to target_cmd_parse_cdb()Sudhakar Panneerselvam
This commit also removes the unused argument, cdb, that was passed to this function. Link: https://lore.kernel.org/r/1591559913-8388-5-git-send-email-sudhakar.panneerselvam@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-09scsi: target: Fix NULL pointer dereferenceSudhakar Panneerselvam
NULL pointer dereference happens when the following conditions are met: 1) A SCSI command is received for a non-existing LU or cdb initialization fails in target_setup_cmd_from_cdb(). 2) Tracing is enabled. The following call sequences lead to NULL pointer dereference: 1) iscsit_setup_scsi_cmd transport_lookup_cmd_lun <-- lookup fails. or target_setup_cmd_from_cdb() <-- cdb initialization fails iscsit_process_scsi_cmd iscsit_sequence_cmd transport_send_check_condition_and_sense trace_target_cmd_complete <-- NULL dereference 2) target_submit_cmd_map_sgls transport_lookup_cmd_lun <-- lookup fails or target_setup_cmd_from_cdb() <-- cdb initialization fails transport_send_check_condition_and_sense trace_target_cmd_complete <-- NULL dereference In the above sequence, cmd->t_task_cdb is uninitialized which when referenced in trace_target_cmd_complete() causes NULL pointer dereference. The fix is to use the helper, target_cmd_init_cdb() and call it after transport_init_se_cmd() is called, so that cmd->t_task_cdb can be initialized and hence can be referenced in trace_target_cmd_complete(). Link: https://lore.kernel.org/r/1591559913-8388-4-git-send-email-sudhakar.panneerselvam@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-09scsi: target: Initialize LUN in transport_init_se_cmd()Sudhakar Panneerselvam
Initialization of orig_fe_lun is moved to transport_init_se_cmd() from transport_lookup_cmd_lun(). This helps for the cases where the SCSI request fails before the call to transport_lookup_cmd_lun() so that trace_target_cmd_complete() can print the LUN information to the trace buffer. Due to this change, the lun parameter is removed from transport_lookup_cmd_lun() and transport_lookup_tmr_lun(). Link: https://lore.kernel.org/r/1591559913-8388-3-git-send-email-sudhakar.panneerselvam@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-09scsi: target: Factor out a new helper, target_cmd_init_cdb()Sudhakar Panneerselvam
target_setup_cmd_from_cdb() is called after a successful call to transport_lookup_cmd_lun(). The new helper factors out the code that can be called before the call to transport_lookup_cmd_lun(). This helper will be used in an upcoming commit to address NULL pointer dereference. Link: https://lore.kernel.org/r/1591559913-8388-2-git-send-email-sudhakar.panneerselvam@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-05Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: :This series consists of the usual driver updates (qla2xxx, ufs, zfcp, target, scsi_debug, lpfc, qedi, qedf, hisi_sas, mpt3sas) plus a host of other minor updates. There are no major core changes in this series apart from a refactoring in scsi_lib.c" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits) scsi: ufs: ti-j721e-ufs: Fix unwinding of pm_runtime changes scsi: cxgb3i: Fix some leaks in init_act_open() scsi: ibmvscsi: Make some functions static scsi: iscsi: Fix deadlock on recovery path during GFP_IO reclaim scsi: ufs: Fix WriteBooster flush during runtime suspend scsi: ufs: Fix index of attributes query for WriteBooster feature scsi: ufs: Allow WriteBooster on UFS 2.2 devices scsi: ufs: Remove unnecessary memset for dev_info scsi: ufs-qcom: Fix scheduling while atomic issue scsi: mpt3sas: Fix reply queue count in non RDPQ mode scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event scsi: target: tcmu: Fix a use after free in tcmu_check_expired_queue_cmd() scsi: vhost: Notify TCM about the maximum sg entries supported per command scsi: qla2xxx: Remove return value from qla_nvme_ls() scsi: qla2xxx: Remove an unused function scsi: iscsi: Register sysfs for iscsi workqueue scsi: scsi_debug: Parser tables and code interaction scsi: core: Refactor scsi_mq_setup_tags function scsi: core: Fix incorrect usage of shost_for_each_device scsi: qla2xxx: Fix endianness annotations in source files ...
2020-06-02scsi: target: tcmu: Fix size in calls to tcmu_flush_dcache_rangeBodo Stroesser
1) If remaining ring space before the end of the ring is smaller then the next cmd to write, tcmu writes a padding entry which fills the remaining space at the end of the ring. Then tcmu calls tcmu_flush_dcache_range() with the size of struct tcmu_cmd_entry as data length to flush. If the space filled by the padding was smaller then tcmu_cmd_entry, tcmu_flush_dcache_range() is called for an address range reaching behind the end of the vmalloc'ed ring. tcmu_flush_dcache_range() in a loop calls flush_dcache_page(virt_to_page(start)); for every page being part of the range. On x86 the line is optimized out by the compiler, as flush_dcache_page() is empty on x86. But I assume the above can cause trouble on other architectures that really have a flush_dcache_page(). For paddings only the header part of an entry is relevant due to alignment rules the header always fits in the remaining space, if padding is needed. So tcmu_flush_dcache_range() can safely be called with sizeof(entry->hdr) as the length here. 2) After it has written a command to cmd ring, tcmu calls tcmu_flush_dcache_range() using the size of a struct tcmu_cmd_entry as data length to flush. But if a command needs many iovecs, the real size of the command may be bigger then tcmu_cmd_entry, so a part of the written command is not flushed then. Link: https://lore.kernel.org/r/20200528193108.9085-1-bstroesser@ts.fujitsu.com Acked-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-28ipv4: add ip_sock_set_freebindChristoph Hellwig
Add a helper to directly set the IP_FREEBIND sockopt from kernel space without going through a fake uaccess. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28tcp: add tcp_sock_set_nodelayChristoph Hellwig
Add a helper to directly set the TCP_NODELAY sockopt from kernel space without going through a fake uaccess. Cleanup the callers to avoid pointless wrappers now that this is a simple function call. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: add sock_set_reuseaddrChristoph Hellwig
Add a helper to directly set the SO_REUSEADDR sockopt from kernel space without going through a fake uaccess. For this the iscsi target now has to formally depend on inet to avoid a mostly theoretical compile failure. For actual operation it already did depend on having ipv4 or ipv6 support. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26scsi: target: tcmu: Fix a use after free in tcmu_check_expired_queue_cmd()Dan Carpenter
The pr_debug() dereferences "cmd" after we already freed it by calling tcmu_free_cmd(cmd). The debug printk needs to be done earlier. Link: https://lore.kernel.org/r/20200523101129.GB98132@mwanda Fixes: 61fb24822166 ("scsi: target: tcmu: Userspace must not complete queued commands") Reviewed-by: Mike Christie <mchristi@redhat.com> Reviewed-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-19scsi: target: tcmu: Userspace must not complete queued commandsBodo Stroesser
When tcmu queues a new command - no matter whether in command ring or in qfull_queue - a cmd_id from IDR udev->commands is assigned to the command. If userspace sends a wrong command completion containing the cmd_id of a command on the qfull_queue, tcmu_handle_completions() finds the command in the IDR and calls tcmu_handle_completion() for it. This might do some nasty things because commands in qfull_queue do not have a valid dbi list. To fix this bug, we no longer add queued commands to the idr. Instead the cmd_id is assign when a command is written to the command ring. Due to this change I had to adapt the source code at several places where up to now an idr_for_each had been done. [mkp: fix checkpatch warnings] Link: https://lore.kernel.org/r/20200518164833.12775-1-bstroesser@ts.fujitsu.com Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-19scsi: target: core: Add initiatorname to NON_EXISTENT_LUN errorLance Digby
The NON_EXISTENT_LUN error can be written without an error condition on the initiator responsible. Adding the initiatorname to this message will reduce the effort required to fix this when many initiators are supported by a target. This version ensures the initiator name is also printed on the same message in transport_lookup_tmr_lun for consistency. Link: https://lore.kernel.org/r/9b13bb2e1f52f1792cd81850ee95bf3781bb5363.1589759816.git.lance.digby@gmail.com Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Lance Digby <lance.digby@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-14scsi: target: Put lun_ref at end of tmr processingBodo Stroesser
Testing with Loopback I found that, after a Loopback LUN has executed a TMR, I can no longer unlink the LUN. The rm command hangs in transport_clear_lun_ref() at wait_for_completion(&lun->lun_shutdown_comp) The reason is, that transport_lun_remove_cmd() is not called at the end of target_tmr_work(). It seems, that in other fabrics this call happens implicitly when the fabric drivers call transport_generic_free_cmd() during their ->queue_tm_rsp(). Unfortunately Loopback seems to not comply to the common way of calling transport_generic_free_cmd() from ->queue_*(). Instead it calls transport_generic_free_cmd() from its ->check_stop_free() only. But the ->check_stop_free() is called by transport_cmd_check_stop_to_fabric() after it has reset the se_cmd->se_lun pointer. Therefore the following transport_generic_free_cmd() skips the transport_lun_remove_cmd(). So this patch re-adds the transport_lun_remove_cmd() at the end of target_tmr_work(), which was removed during commit 2c9fa49e100f ("scsi: target/core: Make ABORT and LUN RESET handling synchronous"). For fabrics using transport_generic_free_cmd() in the usual way the double call to transport_lun_remove_cmd() doesn't harm, as transport_lun_remove_cmd() checks for this situation and does not release lun_ref twice. Link: https://lore.kernel.org/r/20200513153443.3554-1-bstroesser@ts.fujitsu.com Fixes: 2c9fa49e100f ("scsi: target/core: Make ABORT and LUN RESET handling synchronous") Cc: stable@vger.kernel.org Tested-by: Bryant G. Ly <bryangly@gmail.com> Reviewed-by: Bart van Assche <bvanassche@acm.org> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-11scsi: target: loopback: Fix READ with data and sensebytesBodo Stroesser
We use tcm_loop with tape emulations running on tcmu. In case application reads a short tape block with a longer READ, or a long tape block with a short READ, according to SCC spec data has to be tranferred _and_ sensebytes with ILI set and information field containing the residual count. Similar problem also exists when using fixed block size in READ. Up to now tcm_loop is not prepared to handle sensebytes if input data is provided, as in tcm_loop_queue_data_in() it only sets SAM_STAT_GOOD and, if necessary, the residual count. To fix the bug, the same handling for sensebytes as present in tcm_loop_queue_status() must be done in tcm_loop_queue_data_in() also. After adding this handling, the two function now are nearly identical, so I created a single function with two wrappers. Link: https://lore.kernel.org/r/20200428182617.32726-1-bstroesser@ts.fujitsu.com Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-07scsi: target: tcmu: Make pgr_support and alua_support attributes writableBodo Stroesser
Currently in tcmu reservation commands are handled by core's pr implementation (default) or completely rejected (emulate_pr set to 0). We additionally want to be able to do full reservation handling in userspace. Therefore we need a way to set TRANSPORT_FLAG_PASSTHROUGH_PGR. The inverted flag is displayed by attribute pgr_support. Since we moved the flag from transport/backend to se_device in the previous commit, we now can make it changeable per device by allowing to write the attribute. The new field transport_flags_changeable in transport/backend is used to reject writing if not allowed for a backend. Regarding ALUA we also want to be able to passthrough commands to userspace in tcmu. Therefore we need TRANSPORT_FLAG_PASSTHROUGH_ALUA to be changeable, because by setting it we can switch off all ALUA checks in core. So we also set TRANSPORT_FLAG_PASSTHROUGH_ALUA in tcmu's transport_flags_changeable. Of course, ALUA and reservation handling in userspace will work only, if session/nexus information is sent to userspace along with every command. This will be object of a patch series announced by Mike Christie. Link: https://lore.kernel.org/r/20200427150823.15350-5-bstroesser@ts.fujitsu.com Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-07scsi: target: Make transport_flags per deviceBodo Stroesser
pgr_support and alua_support device attributes show the inverted value of the transport_flags: * TRANSPORT_FLAG_PASSTHROUGH_PGR * TRANSPORT_FLAG_PASSTHROUGH_ALUA These attributes are per device, while the flags are per backend. Rename the transport_flags in backend/transport to transport_flags_default and use this value to initialize the new transport_flags field in the se_device structure. Now data and attribute both are per se_device. Link: https://lore.kernel.org/r/20200427150823.15350-4-bstroesser@ts.fujitsu.com Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-07scsi: target: tcmu: Add attributes enforce_pr_isids and force_pr_aptplBodo Stroesser
tcmu has not set TRANSPORT_FLAG_PASSTHROUGH_PGR. Therefore the in-core pr emulation is active by default, but there are some attributes for configuration missing. Add them. Link: https://lore.kernel.org/r/20200427150823.15350-3-bstroesser@ts.fujitsu.com Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-07scsi: target: Add missing emulate_pr attribute to passthrough backendsBodo Stroesser
In commit b49d6f788530 ("scsi: target: add emulate_pr backstore attr to toggle PR support") the new attribute emulate_pr was added. passthrough_parse_cdb() uses the attribute's value to distinguish whether reservation commands should be rejected or not. But the new attribute was not added to passthrough_attrib_attrs, so in pscsi and tcmu - the users of passthrough_parse_cdb() - the attribute is not available to change parser's behavior. Link: https://lore.kernel.org/r/20200427150823.15350-2-bstroesser@ts.fujitsu.com Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>