summaryrefslogtreecommitdiff
path: root/drivers/target
AgeCommit message (Collapse)Author
2013-05-31iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handlingNicholas Bellinger
With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31target: Propigate up ->cmd_kref put return via transport_generic_free_cmdNicholas Bellinger
Go ahead and propigate up the ->cmd_kref put return value from target_put_sess_cmd() -> transport_release_cmd() -> transport_put_cmd() -> transport_generic_free_cmd(). This is useful for certain fabrics when determining the active I/O shutdown case with SCF_ACK_KREF where a final target_put_sess_cmd() is still required by the caller. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-30iscsi-target: fix heap buffer overflow on errorKees Cook
If a key was larger than 64 bytes, as checked by iscsi_check_key(), the error response packet, generated by iscsi_add_notunderstood_response(), would still attempt to copy the entire key into the packet, overflowing the structure on the heap. Remote preauthentication kernel memory corruption was possible if a target was configured and listening on the network. CVE-2013-2850 Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-30target/file: Fix off-by-one READ_CAPACITY bug for !S_ISBLK exportNicholas Bellinger
This patch fixes a bug where FILEIO was incorrectly reporting the number of logical blocks (+ 1) when using non struct block_device export mode. It changes fd_get_blocks() to follow all other backend ->get_blocks() cases, and reduces the calculated dev_size by one dev->dev_attrib.block_size number of bytes, and also fixes initial fd_block_size assignment at fd_configure_device() time introduced in commit 0fd97ccf4. Reported-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reported-by: Badari Pulavarty <pbadari@us.ibm.com> Tested-by: Badari Pulavarty <pbadari@us.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-29target: Re-instate sess_wait_list for target_wait_for_sess_cmdsNicholas Bellinger
Switch back to pre commit 1c7b13fe652 list splicing logic for active I/O shutdown with tcm_qla2xxx + ib_srpt fabrics. The original commit was done under the incorrect assumption that it's safe to walk se_sess->sess_cmd_list unprotected in target_wait_for_sess_cmds() after sess->sess_tearing_down = 1 has been set by target_sess_cmd_list_set_waiting() during session shutdown. So instead of adding sess->sess_cmd_lock protection around sess->sess_cmd_list during target_wait_for_sess_cmds(), switch back to sess->sess_wait_list to allow wait_for_completion() + TFO->release_cmd() to occur without having to walk ->sess_cmd_list after the list_splice. Also add a check to exit if target_sess_cmd_list_set_waiting() has already been called, and add a WARN_ON to check for any fabric bug where new se_cmds are added to sess->sess_cmd_list after sess->sess_tearing_down = 1 has already been set. Cc: Joern Engel <joern@logfs.org> Cc: Roland Dreier <roland@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-20target: Remove unused wait_for_tasks bit in target_wait_for_sess_cmdsJoern Engel
Drop unused transport_wait_for_tasks() check in target_wait_for_sess_cmds shutdown code, and convert tcm_qla2xxx + ib_srpt fabric drivers. Cc: Joern Engel <joern@logfs.org> Cc: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-16Merge branch 'queue' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull target fixes from Nicholas Bellinger: "A handful of fixes + minor changes this time around, along with one important >= v3.9 regression fix for IBLOCK backends. The highlights include: - Use FD_MAX_SECTORS in FILEIO for block_device as well as files (agrover) - Fix processing of out-of-order CmdSNs with iSBD driver (shlomo) - Close long-standing target_put_sess_cmd() vs. core_tmr_abort_task() race with the addition of kref_put_spinlock_irqsave() (joern + greg-kh) - Fix IBLOCK WCE=1 + DPOFUA=1 backend WRITE regression in >= v3.9 (nab + bootc) Note these four patches are CC'ed to stable. Also, there is still some work left to be done on the active I/O shutdown path in target_wait_for_sess_cmds() used by tcm_qla2xxx + ib_isert fabrics that is still being discussed on the list, and will hopefully be resolved soon." * 'queue' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: close target_put_sess_cmd() vs. core_tmr_abort_task() race target: removed unused transport_state flag target/iblock: Fix WCE=1 + DPOFUA=1 backend WRITE regression MAINTAINERS: Update target git tree URL iscsi-target: Fix typos in RDMAEXTENSIONS macro usage target/rd: Add ramdisk bit for NULLIO operation iscsi-target: Fix processing of OOO commands iscsi-target: Make buf param of iscsit_do_crypto_hash_buf() const void * iscsi-target: Fix NULL pointer dereference in iscsit_send_reject target: Have dev/enable show if TCM device is configured target: Use FD_MAX_SECTORS/FD_BLOCKSIZE for blockdevs using fileio target: Remove unused struct members in se_dev_entry
2013-05-15target: close target_put_sess_cmd() vs. core_tmr_abort_task() raceJoern Engel
It is possible for one thread to to take se_sess->sess_cmd_lock in core_tmr_abort_task() before taking a reference count on se_cmd->cmd_kref, while another thread in target_put_sess_cmd() drops se_cmd->cmd_kref before taking se_sess->sess_cmd_lock. This introduces kref_put_spinlock_irqsave() and uses it in target_put_sess_cmd() to close the race window. Signed-off-by: Joern Engel <joern@logfs.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-15target/iblock: Fix WCE=1 + DPOFUA=1 backend WRITE regressionNicholas Bellinger
This patch fixes a regression bug introduced in v3.9-rc1 where if the underlying struct block_device for a IBLOCK backend is configured with WCE=1 + DPOFUA=1 settings, the rw = WRITE assignment no longer occurs in iblock_execute_rw(), and rw = 0 is passed to iblock_submit_bios() in effect causing a READ bio operation to occur. The offending commit is: commit d0c8b259f8970d39354c1966853363345d401330 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Tue Jan 29 22:10:06 2013 -0800 target/iblock: Use backend REQ_FLUSH hint for WriteCacheEnabled status Note the WCE=1 + DPOFUA=0, WCE=0 + DPOFUA=1, and WCE=0 + DPOFUA=0 cases are not affected by this regression bug. Reported-by: Chris Boot <bootc@bootc.net> Tested-by: Chris Boot <bootc@bootc.net> Reported-by: Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-11iscsi-target: Fix typos in RDMAEXTENSIONS macro usageNicholas Bellinger
This patch fixes a handful of typos in 'RDMAEXTENTIONS' -> 'RDMAEXTENSIONS' macro usage. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-11target/rd: Add ramdisk bit for NULLIO operationNicholas Bellinger
This patch adds a rd_nullio parameter that allows RAMDISK_MCP backends to function in NULLIO mode, where all se_cmd I/O is immediately completed in rd_execute_rw() without actually performing the SGL memory copy. This is useful for performance testing when the ramdisk SGL memory copy begins to eat lots of cycles during heavy small block workloads, so allow this bit to be enabled when necessary on a per rd_dev basis. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-07iscsi-target: Fix processing of OOO commandsShlomo Pongratz
Fix two issues in OOO commands processing done at iscsit_attach_ooo_cmdsn. Handle command serial numbers wrap around by using iscsi_sna_lt and not regular comparisson. The routine iterates until it finds an entry whose serial number is greater than the serial number of the new one, thus the new entry should be inserted before that entry and not after. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-03iscsi-target: Make buf param of iscsit_do_crypto_hash_buf() const void *Geert Uytterhoeven
Make the "buf" input param of iscsit_do_crypto_hash_buf() "const void *". This allows to remove lots of casts in its callers. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-03iscsi-target: Fix NULL pointer dereference in iscsit_send_rejectNicholas Bellinger
Fix up a NULL pointer dereference regression in iscsit_send_reject() introduced by from commit 2ec5a8c11. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-03target: Have dev/enable show if TCM device is configuredAndy Grover
User tools need to know if the device is properly configured, since if not, some other attributes are invalid. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-03target: Use FD_MAX_SECTORS/FD_BLOCKSIZE for blockdevs using fileioAndy Grover
We can still see the error reported in https://patchwork.kernel.org/patch/2338981/ when using fileio backed by a block device. I'm assuming this will get us past that error (from sbc_parse_cdb), and also assuming it's OK to have our max_sectors be larger than the block's queue max hw sectors? Reported-by: Eric Harney <eharney@redhat.com> Signed-off-by: Andy Grover <agrover@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-03target: Remove unused struct members in se_dev_entryAndy Grover
Some were incremented, but never used anywhere from what I could tell. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-04-25tcm_fc: Check for aborted sequenceMark Rustad
Add a check for an aborted sequence, which has a NULL sequence pointer, to avoid target crashes. The most relevant messages from the crash (entered from video capture) include: BUG: unable to handle kernel paging request at ffffffffffffffdf IP: [<ffffffffa02d514c>] fc_seq_send+0x3c/0x150 [libfc] ... Call Trace: [<ffffffffa0443de6>] ft_queue_data_in+0x266/0x560 [tcm_fc] Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Add iser network portal attributeNicholas Bellinger
This patch adds a new network portal attribute for iser, that lives under existing iscsi-target configfs layout at: /sys/kernel/config/target/iscsi/$TARGETNAME/$TPGT/np/$PORTAL/iser When lio_target_np_store_iser() is enabled, iscsit_tpg_add_network_portal() will attempt to start an rdma_cma network portal for iser-target, only if the external ib_isert module transport has been loaded. When disabled, iscsit_tpg_del_network_portal() will cease iser login service on the network portal, and release any external ib_isert module reference. v4 changes: - Add request_module for ib_isert to lio_target_np_store_iser() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Refactor TX queue logic + export response PDU creationNicholas Bellinger
This patch refactors TX immediate + response queue handling to use the new iscsit_transport API callers, and exports the necessary traditional iscsi PDU response creation functions for iser-target to utilize. This includes: - Add iscsit_build_datain_pdu() for DATAIN PDU init + convert iscsit_build_datain_pdu() - Add iscsit_build_logout_rsp() for LOGOUT_RSP PDU init + convert iscsit_send_logout() - Add iscsit_build_nopin_rsp() for NOPIN_RSP PDU init + convert iscsit_send_nopin() - Add iscsit_build_rsp_pdu() for SCSI_RSP PDU init + convert iscsit_send_response() - Add iscsit_build_task_mgt_rsp for TM_RSP PDU init + convert iscsit_send_task_mgt_rsp() - Refactor immediate queue state switch into iscsit_immediate_queue() - Convert handle_immediate_queue() to use iscsit_transport caller - Refactor response queue state switch into iscsit_response_queue() - Convert handle_response_queue to use iscsit_transport caller - Export iscsit_logout_post_handler(), iscsit_increment_maxcmdsn() and iscsit_tmr_post_handler() for external transport module usage v5 changes: - Fix solicited NopIN handling with RDMAExtensions=No (nab) v3 changes: - Add iscsit_build_reject for REJECT PDU init + convert iscsit_send_reject() v2 changes: - Add iscsit_queue_rsp() for iscsit_transport->iscsit_queue_data_in() and iscsit_transport->iscsit_queue_status() - Update lio_queue_data_in() to use ->iscsit_queue_data_in() - Update lio_queue_status() to use ->iscsit_queue_status() - Use mutex_trylock() in iscsit_increment_maxcmdsn() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Refactor RX PDU logic + export request PDU handlingNicholas Bellinger
This patch refactors existing traditional iscsi RX side PDU handling to use iscsit_transport, and exports the necessary logic for external transport modules. This includes: - Refactor iscsit_handle_scsi_cmd() into PDU setup / processing - Add updated iscsit_handle_scsi_cmd() for tradtional iscsi code - Add iscsit_set_unsoliticed_dataout() wrapper - Refactor iscsit_handle_data_out() into PDU check / processing - Add updated iscsit_handle_data_out() for tradtional iscsi code - Add iscsit_handle_nop_out() + iscsit_handle_task_mgt_cmd() to accept pre-allocated struct iscsi_cmd - Add iscsit_build_r2ts_for_cmd() caller for iscsi_target_transport to handle ISTATE_SEND_R2T for TX immediate queue - Refactor main traditional iscsi iscsi_target_rx_thread() PDU switch into iscsi_target_rx_opcode() using iscsit_allocate_cmd() - Turn iscsi_target_rx_thread() process context into NOP for ib_isert side work-queue. v5 changes: - Make iscsit_handle_scsi_cmd() static (Fengguang) - Fix iscsit_handle_scsi_cmd() exception se_cmd leak (nab) v3 changes: - Add extra target_put_sess_cmd call in iscsit_add_reject_from_cmd after completion v2 changes: - Disable iscsit_ack_from_expstatsn() usage for RDMAExtentions=Yes - Disable iscsit_allocate_datain_req() usage for RDMAExtentions=Yes - Add target_get_sess_cmd() reference counting to iscsit_setup_scsi_cmd() - Add TFO->lio_check_stop_free() fabric API caller - Add export of iscsit_stop_dataout_timer() symbol - Add iscsit_build_r2ts_for_cmd() for iscsit_transport->iscsit_get_dataout() - Convert existing usage of iscsit_build_r2ts_for_cmd() to ->iscsit_get_dataout() - Drop RDMAExtentions=Yes specific check in iscsit_build_r2ts_for_cmd() - Fix RDMAExtentions -> RDMAExtensions typo (andy) - Pass correct dump_payload value into iscsit_get_immediate_data() for iscsit_handle_scsi_cmd() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Add per transport iscsi_cmd alloc/freeNicholas Bellinger
This patch converts struct iscsi_cmd memory allocation + free to use ->iscsit_alloc_cmd() iscsit_transport API caller, and export iscsit_allocate_cmd() symbols Also add iscsi_cmd->release_cmd() to be used seperately from iscsit_transport for connection/session shutdown. v2 changes: - Remove unnecessary checks in iscsit_alloc_cmd (asias) - Drop iscsit_transport->iscsit_free_cmd() usage - Drop iscsit_transport->iscsit_unmap_cmd() usage - Add iscsi_cmd->release_cmd() - Convert lio_release_cmd() to use iscsi_cmd->release_cmd() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Add iser-target parameter keys + setup during loginNicholas Bellinger
This patch adds RDMAExtensions, InitiatorRecvDataSegmentLength and TargetRecvDataSegmentLength parameters keys necessary for iser-target login to occur. This includes setting the necessary parameters during login path code within iscsi_login_zero_tsih_s2(), and currently PAGE_SIZE aligning the target's advertised MRDSL for immediate data and unsolicited data-out incoming payloads. v3 changes: - Add iscsi_post_login_start_timers FIXME for ISER v2 changes: - Fix RDMAExtentions -> RDMAExtensions typo (andy) - Drop unnecessary '== true' conditional checks for type bool Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Initial traditional TCP conversion to iscsit_transportNicholas Bellinger
This patch performs the initial conversion of existing traditional iscsi to use iscsit_transport API callers. This includes: - iscsi-np cleanups for iscsit_transport_type - Add iscsi-np transport calls w/ ->iscsit_setup_up() and ->iscsit_free_np() - Convert login thread process context to use ->iscsit_accept_np() for connections with pre-allocated struct iscsi_conn - Convert existing socket accept code to iscsit_accept_np() - Convert login RX/TX callers to use ->iscsit_get_login_rx() and ->iscsit_put_login_tx() to exchange request/response PDUs - Convert existing socket login RX/TX calls into iscsit_get_login_rx() and iscsit_put_login_tx() - Change iscsit_close_connection() to invoke ->iscsit_free_conn() + iscsit_put_transport() calls. - Add iscsit_register_transport() + iscsit_unregister_transport() calls to module init/exit v4 changes: - Add missing iscsit_put_transport() call in iscsi_target_setup_login_socket() failure case v2 changes: - Update module init/exit to use register_transport() + unregister_transport() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25iscsi-target: Add iscsit_transport API templateNicholas Bellinger
Add basic struct iscsit_transport API template to allow iscsi-target for running with external transport modules using existing iscsi_target_core.h code. For all external modules, this calls try_module_get() and module_put() to obtain + release an external iscsit_transport module reference count. Also include the iscsi-target symbols necessary in iscsi_transport.h to allow external transport modules to function. v3 changes: - Add iscsit_build_reject export for ISTATE_SEND_REJECT usage v2 changes: - Drop unnecessary export of iscsit_get_transport + iscsit_put_transport (roland) - Add ->iscsit_queue_data_in() to remove extra context switch on RDMA_WRITE - Add ->iscsit_queue_status() to remove extra context switch on IB_SEND status - Add ->iscsit_get_dataout() to remove extra context switch on RDMA_READ - Drop ->iscsit_free_cmd() - Drop ->iscsit_unmap_cmd() - Rename iscsit_create_transport() -> iscsit_register_transport() (andy) - Rename iscsit_destroy_transport() -> iscsit_unregister_transport() (andy) Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target: Add export of target_get_sess_cmd symbolNicholas Bellinger
Export target_get_sess_cmd() symbol so that it can be used by iscsi-target. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target: Change default sense key of NOT_READYJörn Engel
As the comment sais, this allows Solaris initiators to survive intermittent errors. The comment from someone reading the Solaris sources seem to imply that multipathing would be broken without this patch as well. Signed-off-by: Joern Engel <joern@logfs.org> Cc: Brian Bunker <brian@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target/file: Set is_nonrot attributeAsias He
Set is_nonrot attribute according to the block queue if the backend device is a block device. Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target: Add sbc_execute_unmap() helperAsias He
iblock_execute_unmap() and fd_execute_unmap share a lot of code. Add sbc_execute_unmap() helper to remove duplicated code for iblock_execute_unmap() and fd_execute_unmap(). Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target/iblock: Add iblock_do_unmap() helperAsias He
Add helper iblock_do_unmap() to remove duplicated code in iblock_execute_write_same_unmap() and iblock_execute_unmap(). Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target/file: Add fd_do_unmap() helperAsias He
Add helper fd_do_unmap() to remove duplicated code in fd_execute_write_same_unmap() and fd_execute_unmap(). Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target/file: Add UNMAP emulation supportAsias He
This patch adds support for emulation of UNMAP within fd_execute_unmap() backend code. If the FILEIO backend is normal file, the emulation uses fallocate to punch hole to reclaim the free space used by the file. If the FILEIO backend is block device, the emulation uses blkdev_issue_discard(). Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target/file: Add WRITE_SAME w/ UNMAP=1 emulation supportAsias He
This patch adds support for emulation of WRITE_SAME w/ UNMAP=1 within fd_execute_write_same_unmap() backend code. If the FILEIO backend is normal file, the emulation uses fallocate to punch hole to reclaim the free space used by the file. If the FILEIO backend is block device, the emulation uses blkdev_issue_discard(). Tested with 512, 1k, 2k, and 4k block_sizes. Changes in v2: - Set the various dev->dev_attrib.*unmap* values (nab) Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25tcm_fc: using kfree_rcu() to simplify the codeWei Yongjun
The callback function of call_rcu() just calls a kfree(), so we can use kfree_rcu() instead of call_rcu() + callback function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target/iscsi: Use ISCSI_LOGIN_CURRENT/NEXT_STAGE macrosAndy Grover
Fix bit-clearing in login_rsp->flags for case 0. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25target/iscsi: Remove chap_set_random()Andy Grover
The result from get_random_bytes should already be random, so further manipulation and mixing should not be needed. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-11target: Fix incorrect fallthrough of ALUA Standby/Offline/Transition CDBsNicholas Bellinger
This patch fixes a bug where a handful of informational / control CDBs that should be allowed during ALUA access state Standby/Offline/Transition where incorrectly returning CHECK_CONDITION + ASCQ_04H_ALUA_TG_PT_*. This includes INQUIRY + REPORT_LUNS, which would end up preventing LUN registration when LUN scanning occured during these ALUA access states. Cc: Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-09tcm: switch to ->show_info()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-28target: Fix RESERVATION_CONFLICT status regression for iscsi-target special caseNicholas Bellinger
This patch fixes a regression introduced in v3.8-rc1 code where a failed target_check_reservation() check in target_setup_cmd_from_cdb() was causing an incorrect SAM_STAT_GOOD status to be returned during a WRITE operation performed by an unregistered / unreserved iscsi initiator port. This regression is only effecting iscsi-target due to a special case check for TCM_RESERVATION_CONFLICT within iscsi_target_erl1.c:iscsit_execute_cmd(), and was still correctly disallowing WRITE commands from backend submission for unregistered / unreserved initiator ports, while returning the incorrect SAM_STAT_GOOD status due to the missing SAM_STAT_RESERVATION_CONFLICT assignment. This regression was first introduced with: commit de103c93aff0bed0ae984274e5dc8b95899badab Author: Christoph Hellwig <hch@lst.de> Date: Tue Nov 6 12:24:09 2012 -0800 target: pass sense_reason as a return value Go ahead and re-add the missing SAM_STAT_RESERVATION_CONFLICT assignment during a target_check_reservation() failure, so that iscsi-target code sends the correct SCSI status. All other fabrics using target_submit_cmd_*() with a RESERVATION_CONFLICT call to transport_generic_request_failure() are not effected by this bug. Reported-by: Jeff Leung <jleung@curriegrad2004.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-19target/pscsi: Reject cross page boundary case in pscsi_map_sgAsias He
We can only have one page of data in each sg element, so we can not cross a page boundary. Fail this case. The 'while (len > 0 && data_len > 0) {}' loop is not necessary. The loop can only be executed once. Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-19target/file: Bump FD_MAX_SECTORS to 2048 to handle 1M sized I/OsNicholas Bellinger
This patch bumps the default FILEIO backend FD_MAX_SECTORS value from 1024 -> 2048 in order to allow block_size=512 to handle 1M sized I/Os. The current default rejects I/Os larger than 512K in sbc_parse_cdb(): [12015.915146] SCSI OP 2ah with too big sectors 1347 exceeds backend hw_max_sectors: 1024 [12015.977744] SCSI OP 2ah with too big sectors 2048 exceeds backend hw_max_sectors: 1024 This issue is present in >= v3.5 based kernels, introduced after the removal of se_task logic. Reported-by: Viljami Ilola <azmulx@netikka.fi> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-18target: fix possible memory leak in core_tpg_register()Wei Yongjun
'se_tpg->tpg_lun_list' is malloced in core_tpg_register() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. 'se_tpg' is malloced out of this function, and will be freed if we return error, so remove free for 'se_tpg'. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-18target/iscsi: Fix mutual CHAP auth on big-endian archesAndy Grover
See https://bugzilla.redhat.com/show_bug.cgi?id=916290 Used a temp var since we take its address in sg_init_one. Signed-off-by: Andy Grover <agrover@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-18target_core_sbc: use noop for SYNCHRONIZE_CACHEHannes Reinecke
Windows does not expect SYNCHRONIZE_CACHE to be not supported, and will generate a BSOD upon shutdown when using rd_mcp backend. So better use a noop here. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-02Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target patches from Nicholas Bellinger: "Here are the remaining target-pending patches for v3.9-rc1. The most important one here is the immediate queue starvation regression fix for iscsi-target, which addresses a bug that's effecting v3.5+ kernels under heavy sustained READ only workloads. Thanks alot to Benjamin Estrabaud for helping to track this down! Also included is a pSCSI exception bugfix from Asias, along with a handful of other minor changes. Both bugfixes are CC'ed to stable." * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target/pscsi: Rename sg_num to nr_vecs in pscsi_get_bio() target/pscsi: Fix page increment target/pscsi: Drop unnecessary NULL assignment to bio->bi_next target: Add __exit annotation for module_exit functions iscsi-target: Fix immediate queue starvation regression with DATAIN
2013-02-27target/pscsi: Rename sg_num to nr_vecs in pscsi_get_bio()Asias He
It is actually a vector not a sg, so nr_vecs is better than sg_num. Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-27target/pscsi: Fix page incrementAsias He
The page++ is wrong. It makes bio_add_pc_page() pointing to a wrong page address if the 'while (len > 0 && data_len > 0) { ... }' loop is executed more than one once. Signed-off-by: Asias He <asias@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-27target/pscsi: Drop unnecessary NULL assignment to bio->bi_nextAsias He
Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-27target: Add __exit annotation for module_exit functionsAsias He
Inclues sbp_exit, fileio_module_exit, iblock_module_exit and pscsi_module_exit. Note: rd_module_exit() can not be annotated by __exit, becasue it is called by target_core_init_configfs() which is annotated by __init. Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>