summaryrefslogtreecommitdiff
path: root/drivers/target/tcm_fc
AgeCommit message (Collapse)Author
2013-07-07target: make queue_tm_rsp() return voidJoern Engel
The return value wasn't checked by any of the callers. Assuming this is correct behaviour, we can simplify some code by not bothering to generate it. nab: Add srpt_queue_data_in() + srpt_queue_tm_rsp() nops around srpt_queue_response() void return Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-07target: remove unused codes from enum tcm_tmrsp_tableJoern Engel
Three have been checked for but were never set. Remove the dead code. Also renumbers the remaining ones to a) get rid of the holes after the removal and b) avoid a collision between TMR_FUNCTION_COMPLETE==0 and the uninitialized case. If we failed to set a code, we should rather fall into the default case then return success. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25tcm_fc: Check for aborted sequenceMark Rustad
Add a check for an aborted sequence, which has a NULL sequence pointer, to avoid target crashes. The most relevant messages from the crash (entered from video capture) include: BUG: unable to handle kernel paging request at ffffffffffffffdf IP: [<ffffffffa02d514c>] fc_seq_send+0x3c/0x150 [libfc] ... Call Trace: [<ffffffffa0443de6>] ft_queue_data_in+0x266/0x560 [tcm_fc] Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-25tcm_fc: using kfree_rcu() to simplify the codeWei Yongjun
The callback function of call_rcu() just calls a kfree(), so we can use kfree_rcu() instead of call_rcu() + callback function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-10tcm_fc: Do not report target role when target is not definedMark Rustad
Clear the target role when no target is provided for the node performing a PRLI. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Acked by Robert Love <robert.w.love@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-01-10tcm_fc: Do not indicate retry capability to initiatorsMark Rustad
When generating a PRLI response to an initiator, clear the FCP_SPPF_RETRY bit in the response. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Acked by Robert Love <robert.w.love@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-12-12target/tcm_fc: fix the lockdep warning due to inconsistent lock stateYi Zou
The lockdep warning below is in theory correct but it will be in really weird rare situation that ends up that deadlock since the tcm fc session is hashed based the rport id. Nonetheless, the complaining below is about rcu callback that does the transport_deregister_session() is happening in softirq, where transport_register_session() that happens earlier is not. This triggers the lockdep warning below. So, just fix this to make lockdep happy by disabling the soft irq before calling transport_register_session() in ft_prli. BTW, this was found in FCoE VN2VN over two VMs, couple of create and destroy would get this triggered. v1: was enforcing register to be in softirq context which was not righ. See, http://www.spinics.net/lists/target-devel/msg03614.html v2: following comments from Roland&Nick (thanks), it seems we don't have to do transport_deregister_session() in rcu callback, so move it into ft_sess_free() but still do kfree() of the corresponding ft_sess struct in rcu callback to make sure the ft_sess is not freed till the rcu callback. ... [ 1328.370592] scsi2 : FCoE Driver [ 1328.383429] fcoe: No FDMI support. [ 1328.384509] host2: libfc: Link up on port (000000) [ 1328.934229] host2: Assigned Port ID 00a292 [ 1357.232132] host2: rport 00a393: Remove port [ 1357.232568] host2: rport 00a393: Port sending LOGO from Ready state [ 1357.233692] host2: rport 00a393: Delete port [ 1357.234472] host2: rport 00a393: work event 3 [ 1357.234969] host2: rport 00a393: callback ev 3 [ 1357.235979] host2: rport 00a393: Received a LOGO response closed [ 1357.236706] host2: rport 00a393: work delete [ 1357.237481] [ 1357.237631] ================================= [ 1357.238064] [ INFO: inconsistent lock state ] [ 1357.238450] 3.7.0-rc7-yikvm+ #3 Tainted: G O [ 1357.238450] --------------------------------- [ 1357.238450] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 1357.238450] ksoftirqd/0/3 [HC0[0]:SC1[1]:HE0:SE0] takes: [ 1357.238450] (&(&se_tpg->session_lock)->rlock){+.?...}, at: [<ffffffffa01eacd4>] transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] {SOFTIRQ-ON-W} state was registered at: [ 1357.238450] [<ffffffff810834f5>] mark_held_locks+0x6d/0x95 [ 1357.238450] [<ffffffff8108364a>] trace_hardirqs_on_caller+0x12d/0x197 [ 1357.238450] [<ffffffff810836c1>] trace_hardirqs_on+0xd/0xf [ 1357.238450] [<ffffffff8149caba>] _raw_spin_unlock_irq+0x2d/0x45 [ 1357.238450] [<ffffffffa01e8d10>] __transport_register_session+0xb8/0x122 [target_core_mod] [ 1357.238450] [<ffffffffa01e8dbe>] transport_register_session+0x44/0x5a [target_core_mod] [ 1357.238450] [<ffffffffa018e32c>] ft_prli+0x1e3/0x275 [tcm_fc] [ 1357.238450] [<ffffffffa0160e8d>] fc_rport_recv_req+0x95e/0xdc5 [libfc] [ 1357.238450] [<ffffffffa015be88>] fc_lport_recv_els_req+0xc4/0xd5 [libfc] [ 1357.238450] [<ffffffffa015c778>] fc_lport_recv_req+0x12f/0x18f [libfc] [ 1357.238450] [<ffffffffa015a6d7>] fc_exch_recv+0x8ba/0x981 [libfc] [ 1357.238450] [<ffffffffa0176d7a>] fcoe_percpu_receive_thread+0x47a/0x4e2 [fcoe] [ 1357.238450] [<ffffffff810549f1>] kthread+0xb1/0xb9 [ 1357.238450] [<ffffffff814a40ec>] ret_from_fork+0x7c/0xb0 [ 1357.238450] irq event stamp: 275411 [ 1357.238450] hardirqs last enabled at (275410): [<ffffffff810bb6a0>] rcu_process_callbacks+0x229/0x42a [ 1357.238450] hardirqs last disabled at (275411): [<ffffffff8149c2f7>] _raw_spin_lock_irqsave+0x22/0x8e [ 1357.238450] softirqs last enabled at (275394): [<ffffffff8103d669>] __do_softirq+0x246/0x26f [ 1357.238450] softirqs last disabled at (275399): [<ffffffff8103d6bb>] run_ksoftirqd+0x29/0x62 [ 1357.238450] [ 1357.238450] other info that might help us debug this: [ 1357.238450] Possible unsafe locking scenario: [ 1357.238450] [ 1357.238450] CPU0 [ 1357.238450] ---- [ 1357.238450] lock(&(&se_tpg->session_lock)->rlock); [ 1357.238450] <Interrupt> [ 1357.238450] lock(&(&se_tpg->session_lock)->rlock); [ 1357.238450] [ 1357.238450] *** DEADLOCK *** [ 1357.238450] [ 1357.238450] no locks held by ksoftirqd/0/3. [ 1357.238450] [ 1357.238450] stack backtrace: [ 1357.238450] Pid: 3, comm: ksoftirqd/0 Tainted: G O 3.7.0-rc7-yikvm+ #3 [ 1357.238450] Call Trace: [ 1357.238450] [<ffffffff8149399a>] print_usage_bug+0x1f5/0x206 [ 1357.238450] [<ffffffff8100da59>] ? save_stack_trace+0x2c/0x49 [ 1357.238450] [<ffffffff81082aae>] ? print_irq_inversion_bug.part.14+0x1ae/0x1ae [ 1357.238450] [<ffffffff81083336>] mark_lock+0x106/0x258 [ 1357.238450] [<ffffffff81084e34>] __lock_acquire+0x2e7/0xe53 [ 1357.238450] [<ffffffff8102903d>] ? pvclock_clocksource_read+0x48/0xb4 [ 1357.238450] [<ffffffff810ba6a3>] ? rcu_process_gp_end+0xc0/0xc9 [ 1357.238450] [<ffffffffa01eacd4>] ? transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffff81085ef1>] lock_acquire+0x119/0x143 [ 1357.238450] [<ffffffffa01eacd4>] ? transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffff8149c329>] _raw_spin_lock_irqsave+0x54/0x8e [ 1357.238450] [<ffffffffa01eacd4>] ? transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffffa01eacd4>] transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffff810bb6a0>] ? rcu_process_callbacks+0x229/0x42a [ 1357.238450] [<ffffffffa018ddc5>] ft_sess_rcu_free+0x17/0x24 [tcm_fc] [ 1357.238450] [<ffffffffa018ddae>] ? ft_sess_free+0x1b/0x1b [tcm_fc] [ 1357.238450] [<ffffffff810bb6d7>] rcu_process_callbacks+0x260/0x42a [ 1357.238450] [<ffffffff8103d55d>] __do_softirq+0x13a/0x26f [ 1357.238450] [<ffffffff8149b34e>] ? __schedule+0x65f/0x68e [ 1357.238450] [<ffffffff8103d6bb>] run_ksoftirqd+0x29/0x62 [ 1357.238450] [<ffffffff8105c83c>] smpboot_thread_fn+0x1a5/0x1aa [ 1357.238450] [<ffffffff8105c697>] ? smpboot_unregister_percpu_thread+0x47/0x47 [ 1357.238450] [<ffffffff810549f1>] kthread+0xb1/0xb9 [ 1357.238450] [<ffffffff8149b49d>] ? wait_for_common+0xbb/0x10a [ 1357.238450] [<ffffffff81054940>] ? __init_kthread_worker+0x59/0x59 [ 1357.238450] [<ffffffff814a40ec>] ret_from_fork+0x7c/0xb0 [ 1357.238450] [<ffffffff81054940>] ? __init_kthread_worker+0x59/0x59 [ 1417.440099] rport-2:0-0: blocked FC remote port time out: removing rport Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Open-FCoE <devel@open-fcoe.org> Cc: Nicholas A. Bellinger <nab@risingtidesystems.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17tcm_fc: move the dereference below the NULL testWei Yongjun
The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17tcm_fc: remove unused including <generated/utsrelease.h>Wei Yongjun
Remove including <generated/utsrelease.h> that don't need it. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target: Simplify fabric sense data length handlingRoland Dreier
Every fabric driver has to supply a se_tfo->set_fabric_sense_len() method, just so iSCSI can return an offset of 2. However, every fabric driver is already allocating a sense buffer and passing it into the target core, either via transport_init_se_cmd() or target_submit_cmd(). So instead of having iSCSI pass the start of its sense buffer into the core and then later tell the core to skip the first 2 bytes, it seems easier for iSCSI just to do the offset of 2 when it passes the sense buffer into the core. Then we can drop the se_tfo->set_fabric_sense_len() everywhere, and just add a couple of lines of code to iSCSI to set the sense data length to the beginning of the buffer right before it sends it over the network. (nab: Remove .set_fabric_sense_len usage from tcm_qla2xxx_npiv_ops + change transport_get_sense_buffer to follow v3.6-rc6 code w/o ->set_fabric_sense_len usage) Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target: Remove unused target_core_fabric_ops.get_fabric_sense_len methodRoland Dreier
There are no callers of se_tfo->get_fabric_sense_len(), so we should stop having every fabric driver implement it. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-08-20tcm_fc: rcu_deref outside rcu lock/unlock sectionDenis Efremov
Use rcu_dereference_protected in order to prevent lockdep complaint. Sequel of the patch 863555be Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov <yefremov.denis@gmail.com> Acked-by: Mark D. Rustad <mark.d.rustad@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-08-16tcm_fc: Avoid debug overhead when not debuggingMark Rustad
Stop doing a pile of work related to debugging messages when the ft_debug_logging flag is not set. Use unlikely to add the check in a way that the check can be inlined without inlining the whole thing. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: Allow for target_submit_cmd() returning errorsRoland Dreier
We want it to be possible for target_submit_cmd() to return errors up to its fabric module callers. For now just update the prototype to return an int, and update all callers to handle non-zero return values as an error. This is immediately useful for tcm_qla2xxx to fix a long-standing active I/O session shutdown race, but tcm_fc, usb-gadget, and sbp-target the fabric maintainers need to check + ACK that handling a target_submit_cmd() failure due to session shutdown does not introduce regressions (nab: Respin against for-next after initial NACK + update docbook comment + fix double se_cmd init in exception path for usb-gadget) Cc: Chad Dupuis <chad.dupuis@qlogic.com> Cc: Arun Easi <arun.easi@qlogic.com> Cc: Chris Boot <bootc@bootc.net> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Mark Rustad <mark.d.rustad@intel.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Felipe Balbi <balbi@ti.com> Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16tcm_fc: Offload WRITE I/O backend submission to tpg workqueueChristoph Hellwig
Defer the write processing to the internal to be able to use target_execute_cmd. I'm not even entirely sure the calling code requires this due to the convoluted structure in libfc, but let's be safe for now. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Mark Rustad <mark.d.rustad@intel.com> Cc: Kiran Patil <Kiran.patil@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16target: remove control CDB flagsChristoph Hellwig
We don't need three flags to classifiy the CDB as we can check for a NULL S/G list for a dataless command, and can infer from the absence of the data flag that we deal with a control CDB. Also remove the _SG_IO from the data CDB flag as all I/O is dont on S/G lists now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-14tcm_fc: Fix crash seen with aborts and large readsMark Rustad
This patch fixes a crash seen when large reads have their exchange aborted by either timing out or being reset. Because the exchange abort results in the seq pointer being set to NULL, because the sequence is no longer valid, it must not be dereferenced. This patch changes the function ft_get_task_tag to return ~0 if it is unable to get the tag for this reason. Because the get_task_tag interface provides no means of returning an error, this seems like the best way to fix this issue at the moment. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-06tcm_fc: Resolve suspicious RCU usage warningsMark Rustad
Use rcu_dereference_protected to tell rcu that the ft_lport_lock is held during ft_lport_create. This resolved "suspicious RCU usage" warnings when debugging options are turned on. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14tcm_fc: Remove use of transport_do_task_sg_chain()Roland Dreier
With the modern target core, se_cmd->t_data_sg already points to a sglist that covers the whole command. So task_sg chaining is needless overhead and obfuscation -- instead of splicing the split up task sglists back into one list, we can just use the original list directly. Signed-off-by: Roland Dreier <roland@purestorage.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Kiran Patil <Kiran.patil@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-06tcm_fc: Do not free tpg structure during wq allocation failureMark Rustad
Avoid freeing a registered tpg structure if an alloc_workqueue call fails. This fixes a bug where the failure was leaking memory associated with se_portal_group setup during the original core_tpg_register() call. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Acked-by: Kiran Patil <Kiran.patil@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-06tcm_fc: Add abort flag for gracefully handling exchange timeoutMark Rustad
Add abort flag and use it to terminate processing when an exchange is timed out or is reset. The abort flag is used in place of the transport_generic_free_cmd function call in the reset and timeout cases, because calling that function in that context would free memory that was in use. The aborted flag allows the lifetime to be managed in a more normal way, while truncating the processing. This change eliminates a source of memory corruption which manifested in a variety of ugly ways. (nab: Drop unused struct fc_exch *ep in ft_recv_seq) Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Acked-by: Kiran Patil <Kiran.patil@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-22Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "This contains the usual set of updates and bugfixes to target-core + existing fabric module code, along with a handful of the patches destined for v3.3 stable. It also contains the necessary target-core infrastructure pieces required to run using tcm_qla2xxx.ko WWPNs with the new Qlogic Fibre Channel fabric module currently queued in target-pending/for-next-merge, and coming for round 2. The highlights for this series include: - Add target_submit_tmr() helper function for fabric task management (andy) - Convert tcm_fc to use target_submit_tmr() (andy) - Replace target core various cmd flags with a transport state (hch) - Convert loopback to use workqueue submission (hch) - Convert target core to use array_zalloc for tpg_lun_list (joern) - Convert target core to use array_zalloc for device_list (joern) - Add target core support for TMR_ABORT_TASK (nab) - Add target core se_sess->sess_kref + get/put helpers (nab) - Add target core se_node_acl->acl_kref for ->acl_free_comp usage (nab) - Convert iscsi-target to use target_put_session + sess_kref (nab) - Fix tcm_fc fc_exch memory leak in ft_send_resp_status (nab) - Fix ib_srpt srpt_handle_cmd send_ioctx->ioctx_kref leak on exception (nab) - Fix target core up handling of short INQUIRY buffers (roland) - Untangle target-core front-end and back-end meanings of max_sectors attribute (roland) - Set loopback residual field for SCSI commands (roland) - Fix target-core 16-bit target ports for SET TARGET PORT GROUPS emulation (roland) Thanks again to Andy, Christoph, Joern, Roland, and everyone who has contributed this round!" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (64 commits) ib_srpt: Fix srpt_handle_cmd send_ioctx->ioctx_kref leak on exception loopback: Fix transport_generic_allocate_tasks error handling iscsi-target: remove improper externs iscsi-target: Remove unused variables in iscsi_target_parameters.c target: remove obvious warnings target: Use array_zalloc for device_list target: Use array_zalloc for tpg_lun_list target: Fix sense code for unsupported SERVICE ACTION IN target: Remove hack to make READ CAPACITY(10) lie if thin provisioning is enabled target: Bump core version to v4.1.0-rc2-ml + fabric versions tcm_fc: Fix fc_exch memory leak in ft_send_resp_status target: Drop unused legacy target_core_fabric_ops API callers iscsi-target: Convert to use target_put_session + sess_kref target: Convert se_node_acl->acl_group removal to use ->acl_kref target: Add se_node_acl->acl_kref for ->acl_free_comp usage target: Add se_node_acl->acl_free_comp for NodeACL release path target: Add se_sess->sess_kref + get/put helpers target: Convert session_lock to irqsave target: Fix typo in drivers/target iscsi-target: Fix dynamic -> explict NodeACL pointer reference ...
2012-03-21Merge branch 'kmap_atomic' of git://github.com/congwang/linuxLinus Torvalds
Pull kmap_atomic cleanup from Cong Wang. It's been in -next for a long time, and it gets rid of the (no longer used) second argument to k[un]map_atomic(). Fix up a few trivial conflicts in various drivers, and do an "evil merge" to catch some new uses that have come in since Cong's tree. * 'kmap_atomic' of git://github.com/congwang/linux: (59 commits) feature-removal-schedule.txt: schedule the deprecated form of kmap_atomic() for removal highmem: kill all __kmap_atomic() [swarren@nvidia.com: highmem: Fix ARM build break due to __kmap_atomic rename] drbd: remove the second argument of k[un]map_atomic() zcache: remove the second argument of k[un]map_atomic() gma500: remove the second argument of k[un]map_atomic() dm: remove the second argument of k[un]map_atomic() tomoyo: remove the second argument of k[un]map_atomic() sunrpc: remove the second argument of k[un]map_atomic() rds: remove the second argument of k[un]map_atomic() net: remove the second argument of k[un]map_atomic() mm: remove the second argument of k[un]map_atomic() lib: remove the second argument of k[un]map_atomic() power: remove the second argument of k[un]map_atomic() kdb: remove the second argument of k[un]map_atomic() udf: remove the second argument of k[un]map_atomic() ubifs: remove the second argument of k[un]map_atomic() squashfs: remove the second argument of k[un]map_atomic() reiserfs: remove the second argument of k[un]map_atomic() ocfs2: remove the second argument of k[un]map_atomic() ntfs: remove the second argument of k[un]map_atomic() ...
2012-03-20target: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-15target: remove obvious warningsJörn Engel
Get rid of a bunch of write-only variables. In a number of cases I suspect actual bugs to be present, so I left all of those for a second look. (nab: fix lio-core patch fuzz) Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10target: Bump core version to v4.1.0-rc2-ml + fabric versionsNicholas Bellinger
Bump core version to v4.1.0-rc2-ml, and for versions from the following mainline fabric modules: loopback: v2.1-rc2 tcm_fc: v0.4 iscsi-target: v4.1.0-rc2 Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10tcm_fc: Fix fc_exch memory leak in ft_send_resp_statusNicholas Bellinger
This patch fixes a bug in tcm_fc where fc_exch memory from fc_exch_mgr->ep_pool is currently being leaked by ft_send_resp_status() usage. Following current code in ft_queue_status() response path, using lport->tt.seq_send() needs to be followed by a lport->tt.exch_done() in order to release fc_exch memory back into libfc_em kmem_cache. ft_send_resp_status() code is currently used in pre submit se_cmd ft_send_work() error exceptions, TM request setup exceptions, and main TM response callback path in ft_queue_tm_resp(). This bugfix addresses the leak in these cases. Cc: Mark D Rustad <mark.d.rustad@intel.com> Cc: Kiran Patil <kiran.patil@intel.com> Cc: Robert Love <robert.w.love@intel.com> Cc: Andy Grover <agrover@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10target: Drop unused legacy target_core_fabric_ops API callersNicholas Bellinger
This patch drops the following unused legacy API callers from target_core_fabric.h: *) TFO->fall_back_to_erl0() *) TFO->stop_session() *) TFO->sess_logged_in() *) TFO->is_state_remove() This patch also removes the stub usage in loopback, tcm_fc, iscsi_target, and ib_srpt fabric modules. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25target: Allow target_submit_tmr interrupt context + pass ABORT_TASK tagNicholas Bellinger
This patch allows target_submit_tmr() to pass gfp_t for se_cmd->se_tmr_req allocation, and also set up se_cmd->se_tmr_req->ref_task_tag for passed tag with TMR_ABORT_TASK. Also update tcm_fc(fcoe) parameter usgae and add ref_task_tag FIXME for TMR_ABORT_TASK usage, Cc: Andy Grover <agrover@redhat.com> Cc: Kiran Patil <kiran.patil@intel.com> Cc: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25tcm_fc: Handle target_submit_tmr allocation failureNicholas Bellinger
This patch makes ft_send_tm() handle target_submit_tmr() allocation failures via an ft_send_resp_code_and_free() w/ FCP_TMF_FAILED status. Cc: Andy Grover <agrover@redhat.com> Cc: Kiran Patil <kiran.patil@intel.com> Cc: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25tcm_fc: Convert ft_send_tm to use target_submit_tmrAndy Grover
Change ft_send_tm() make use of the new target_submit_tmr helper Signed-off-by: Andy Grover <agrover@redhat.com> Cc: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25tcm_fc: Use transport_generic_free_cmd for ft_sess_put in ft_send_tmAndy Grover
transport_generic_free_cmd will end up calling ft_sess_put, so it should work just the same. Signed-off-by: Andy Grover <agrover@redhat.com> Cc: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25tcm_fc: Call lookup_tmr_lun() for all TM typesAndy Grover
Don't see a reason to differentiate, so drop the fabric specific switch statement in ft_send_tm() ahead of conversion to use target_submit_tmr(). Signed-off-by: Andy Grover <agrover@redhat.com> Cc: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25tcm_fc: Move core->fc code conversion earlier in ft_send_tm()Andy Grover
No dependencies on rest of code, let's get tm_func set asap. Signed-off-by: Andy Grover <agrover@redhat.com> Cc: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25target: Add SCF_SCSI_TMR_CDB usage and drop se_tmr_req_cacheAndy Grover
Change the test for if a cmd is a tmr request to checking if SCF_SCSI_TMR_CDB (a new flag) is set in cmd->se_cmd_flags. Also remove se_tmr_req_cache usage in favor of kzalloc usage, and make core_tmr_alloc_req() return int + setup se_cmd->se_tmr_req directly and fix up various fabric module usages Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25tcm_fc: Remove cmd->cdb data memberAndy Grover
It's used only for debug output. Debug output may want to make use of fcp->fc_cdb directly. Signed-off-by: Andy Grover <agrover@redhat.com> Cc: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25tcm_fc: Simplify ft_send_work for tmr pathAndy Grover
Check fc_tm_flags early and call ft_send_tm() right away. Don't need to set local vars for tm case. data_len local var now unneeded, remove. Signed-off-by: Andy Grover <agrover@redhat.com> Cc: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25scsi: Use struct scsi_lun in fc/fcp.hAndy Grover
This allows us to use scsilun_to_int without an ugly cast. Fix up places that use scsilun_to_int on fcp->fc_lun accordingly. In fc target, this leaves ft_cmd.lun unused, so remove it. Signed-off-by: Andy Grover <agrover@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Kiran Patil <kiran.patil@intel.com> Cc: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-21tcm_fc: Convert call_rcu() to kfree_rcu(), drop ft_tport_rcu_free()Paul E. McKenney
The call_rcu() in ft_tport_delete() invokes ft_tport_rcu_free(), which just does a kfree(). So convert the call_rcu() to kfree_rcu(), allowing ft_tport_rcu_free() to be eliminated. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jesper Juhl <jj@chaosbits.net> Cc: linux-scsi@vger.kernel.org Cc: target-devel@vger.kernel.org
2012-02-07target: Change target_submit_cmd() to return voidAndy Grover
Retval not very useful, and may even be harmful. Once submitted, fabrics should expect a sense error if anything goes wrong. All fabrics checking of this retval are useless or broken: fc checks it just to emit more debug output. ib_srpt trickles retval up, then it is ignored. qla2xxx trickles it up, which then causes a bug because the abort goto in qla_target.c thinks cmd hasn't been sent to target. Just returning nothing is best. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14tcm_fc: Convert ft_send_work to use target_submit_cmdNicholas Bellinger
This patch converts the main ft_send_work() I/O path to use target_submit_cmd() with a single se_cmd->cmd_kref reference that is released via the existing ft_check_stop_free() response path callback. It also makes ft_send_tm() use transport_init_se_cmd() and target_get_sess_cmd() to also use single se_cmd->cmd_kref reference. Cc: Christoph Hellwig <hch@lst.de> Cc: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: header reshuffle, part2Christoph Hellwig
This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: Drop config_item_name usage in fabric TFO->free_wwn()Nicholas Bellinger
This patch removes config_item_name() informational usage of TFO->free_wwn() treewide in loopback, tcm_fc, ib_srpt and tcm_vhost module code. Using v4 target_core_fabric_configfs.c logic, a fabric call for config_item_name() in TFO->drop_wwn() context returns NULL as target_fabric_drop_wwn() invoking config_item_put() -> config_group_put() will release fabric_port->port_wwn.wwn_group before the last config_item_put() -> TFO->drop_wwn() is invoked. Reported-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: Address legacy PYX_TRANSPORT_* return code breakageNicholas Bellinger
This patch removes legacy usage of PYX_TRANSPORT_* return codes in a number of locations and addresses cases where transport_generic_request_failure() was returning the incorrect sense upon CHECK_CONDITION status after the v3.1 converson to use errno return codes. This includes the conversion of transport_generic_request_failure() to process cmd->scsi_sense_reason and handle extra TCM_RESERVATION_CONFLICT before calling transport_send_check_condition_and_sense() to queue up response status. It also drops PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES legacy usgae, and returns TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE w/ a response for these cases. transport_generic_allocate_tasks(), transport_generic_new_cmd(), backend SCF_SCSI_DATA_SG_IO_CDB ->do_task(), and emulated ->execute_task() have all been updated to set se_cmd->scsi_sense_reason and return errno codes universally upon failure. This includes cmd->scsi_sense_reason assignment in target_core_alua.c, target_core_pr.c and target_core_cdb.c emulation code. Finally it updates fabric modules to remove the legacy usage, and for TFO->new_cmd_map() callers forwards return values outside of fabric code. iscsi-target has also been updated to remove a handful of special cases related to the cleanup and signaling QUEUE_FULL handling w/ ft_write_pending() (v2: Drop extra SCF_SCSI_CDB_EXCEPTION check during failure from transport_generic_new_cmd, and re-add missing task->task_error_status assignment in transport_complete_task) Cc: Christoph Hellwig <hch@lst.de> Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-02target: Make TFO->check_stop_free return free statusNicholas Bellinger
This patch converts target_core_fabric_ops->check_stop_free() usage in transport_cmd_check_stop() and associated fabric module usage to return '1' when the passed se_cmd has been released directly within ->check_stop_free(), or return '0' when the passed se_cmd has not been released. This addresses an issue where transport_cmd_finish_abort() -> transport_cmd_check_stop_to_fabric() was leaking descriptors during LUN_RESET for modules using ->check_stop_free(), but not directly releasing se_cmd in all cases. Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
2011-10-24target: remove the TRANSPORT_REMOVE stateChristoph Hellwig
We never queue an command with this state, and only set it in a completely bogus place in tcm_fc. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-10-24target: Have core_tmr_alloc_req() take an explicit GFP_xxx flagRoland Dreier
Testing in_interrupt() to know when sleeping is allowed is not really reliable (since eg it won't be true if the caller is holding a spinlock). Instead have the caller tell core_tmr_alloc_req() what GFP_xxx to use; every caller except tcm_qla2xxx can use GFP_KERNEL. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-10-24tcm_fc: remove custom hex_to_bin in ft_parse_wwnAndy Shevchenko
This patch converts ft_parse_wwn() to use hex_to_bin() instead of custom conversion code. (Andy: Re-add missing strict && isupper(c) check) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-10-24target: push session reinstatement out of transport_generic_free_cmdChristoph Hellwig
Push session reinstatement out of transport_generic_free_cmd into the only caller that actually needs it. Clean up transport_generic_free_cmd a bit, and remove the useless comment. I'd love to add a more useful kerneldoc comment for it, but as this point I'm still a bit confused in where it stands in the command release stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 23:01:22 +0000