summaryrefslogtreecommitdiff
path: root/drivers/target/target_core_user.c
AgeCommit message (Collapse)Author
2019-04-27genetlink: optionally validate strictly/dumpsJohannes Berg
Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2019-03-22genetlink: make policy common to familyJohannes Berg
Since maxattr is common, the policy can't really differ sanely, so make it common as well. The only user that did in fact manage to make a non-common policy is taskstats, which has to be really careful about it (since it's still using a common maxattr!). This is no longer supported, but we can fake it using pre_doit. This reduces the size of e.g. nl80211.o (which has lots of commands): text data bss dec hex filename 398745 14323 2240 415308 6564c net/wireless/nl80211.o (before) 397913 14331 2240 414484 65314 net/wireless/nl80211.o (after) -------------------------------- -832 +8 0 -824 Which is obviously just 8 bytes for each command, and an added 8 bytes for the new policy pointer. I'm not sure why the ops list is counted as .text though. Most of the code transformations were done using the following spatch: @ops@ identifier OPS; expression POLICY; @@ struct genl_ops OPS[] = { ..., { - .policy = POLICY, }, ... }; @@ identifier ops.OPS; expression ops.POLICY; identifier fam; expression M; @@ struct genl_family fam = { .ops = OPS, .maxattr = M, + .policy = POLICY, ... }; This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing the cb->data as ops, which we want to change in a later genl patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-16Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "This is the final round of mostly small fixes and performance improvements to our initial submit. The main regression fix is the ia64 simscsi build failure which was missed in the serial number elimination conversion" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: ia64: simscsi: use request tag instead of serial_number scsi: aacraid: Fix performance issue on logical drives scsi: lpfc: Fix error codes in lpfc_sli4_pci_mem_setup() scsi: libiscsi: Hold back_lock when calling iscsi_complete_task scsi: hisi_sas: Change SERDES_CFG init value to increase reliability of HiLink scsi: hisi_sas: Send HARD RESET to clear the previous affiliation of STP target port scsi: hisi_sas: Set PHY linkrate when disconnected scsi: hisi_sas: print PHY RX errors count for later revision of v3 hw scsi: hisi_sas: Fix a timeout race of driver internal and SMP IO scsi: hisi_sas: Change return variable type in phy_up_v3_hw() scsi: qla2xxx: check for kstrtol() failure scsi: lpfc: fix 32-bit format string warning scsi: lpfc: fix unused variable warning scsi: target: tcmu: Switch to bitmap_zalloc() scsi: libiscsi: fall back to sendmsg for slab pages scsi: qla2xxx: avoid printf format warning scsi: lpfc: resolve static checker warning in lpfc_sli4_hba_unset scsi: lpfc: Correct __lpfc_sli_issue_iocb_s4 lockdep check scsi: ufs: hisi: fix ufs_hba_variant_ops passing scsi: qla2xxx: Fix panic in qla_dfs_tgt_counters_show ...
2019-03-06scsi: target: tcmu: Switch to bitmap_zalloc()Andy Shevchenko
Switch to bitmap_zalloc() to show clearly what we are allocating. Besides that it returns pointer of bitmap type instead of opaque void *. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-06scsi: target: tcmu: wait for nl reply only if there are listeners or during ↵Cathy Avery
an add genlmsg_multicast_allns now returns the correct statuses when a message is sent to a listener. However in the case of adding a device we want to wait for the listener otherwise we may miss the the device during startup. Signed-off-by: Cathy Avery <cavery@redhat.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22scsi: tcmu: fix use after freeXiubo Li
Fixes: a94a2572b977 ("scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Mike Christie <mchristi@redhat.com> Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-11scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comesXiubo Li
Currently there is one cmd timeout timer and one qfull timer for each udev, and whenever any new command is coming in we will update the cmd timer or qfull timer. For some corner cases the timers are always working only for the ringbuffer's and full queue's newest cmd. That's to say the timer won't be fired even if one cmd has been stuck for a very long time and the deadline is reached. This fix will keep the cmd/qfull timers to be pended for the oldest cmd in ringbuffer and full queue, and will update them with the next cmd's deadline only when the old cmd's deadline is reached or removed from the ringbuffer and full queue. Signed-off-by: Xiubo Li <xiubli@redhat.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07scsi: target/tcmu: Fix queue_cmd_ring() declarationBart Van Assche
This patch does not change any functionality but avoids that sparse complains about the queue_cmd_ring() function and its callers. Fixes: 6fd0ce79724d ("tcmu: prep queue_cmd_ring to be used by unmap wq") Reviewed-by: David Disseldorp <ddiss@suse.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-15Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx, hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the continuing absence of Nic we have target updates for tcmu and target core (all with reviews and acks). The biggest observable change is going to be that we're (again) trying to switch to mulitqueue as the default (a user can still override the setting on the kernel command line). Other major core stuff is the removal of the remaining Microchannel drivers, an update of the internal timers and some reworks of completion and result handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue scsi: ufs: remove unnecessary query(DM) UPIU trace scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done() scsi: aacraid: Spelling fix in comment scsi: mpt3sas: Fix calltrace observed while running IO & reset scsi: aic94xx: fix an error code in aic94xx_init() scsi: st: remove redundant pointer STbuffer scsi: qla2xxx: Update driver version to 10.00.00.08-k scsi: qla2xxx: Migrate NVME N2N handling into state machine scsi: qla2xxx: Save frame payload size from ICB scsi: qla2xxx: Fix stalled relogin scsi: qla2xxx: Fix race between switch cmd completion and timeout scsi: qla2xxx: Fix Management Server NPort handle reservation logic scsi: qla2xxx: Flush mailbox commands on chip reset scsi: qla2xxx: Fix unintended Logout scsi: qla2xxx: Fix session state stuck in Get Port DB scsi: qla2xxx: Fix redundant fc_rport registration scsi: qla2xxx: Silent erroneous message scsi: qla2xxx: Prevent sysfs access when chip is down scsi: qla2xxx: Add longer window for chip reset ...
2018-07-30scsi: tcmu: use u64 for dev_sizeMike Christie
We use unsigned long, size_t and u64 for dev_size. This has us standardize on u64. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-30scsi: tcmu: use match_int for dev paramsMike Christie
Instead of doing strdup and kstrto* just use match_int for dev params. It will be ok to use int instead of unsigned long in tcmu_set_dev_attrib because that is only being used for max sectors and block size and the supported values for them are well under the max possible integer value. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-30scsi: tcmu: do not set max_blocks if data_bitmap has been setupMike Christie
This patch prevents a bug where data_bitmap is allocated in tcmu_configure_device, userspace changes the max_blocks setting, the device is mapped to a LUN, then we try to access the data_bitmap based on the new max_blocks limit which may now be out of range. To prevent this, we just check if data_bitmap has been setup. If it has then we fail the max_blocks update operation. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-30scsi: tcmu: unmap if dev is configuredMike Christie
The tcmu dev is added to the list of tcmu devices during configuration. At this time the tcmu setup has completed, but lio core has not completed its setup. The device is not yet usable so do not try to unmap blocks from it Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-30scsi: tcmu: check if dev is configured before block/resetMike Christie
Do not allow userspace to block or reset the ring until the device has been configured. This will prevent the bug where userspace can write to those files and access mb_addr before it has been setup. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-30scsi: tcmu: use lio core se_device configuration helperMike Christie
Use the lio core helper to check if the device is configured. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-30scsi: tcmu: initialize list headMike Christie
Use INIT_LIST_HEAD to initialize node list head. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-30scsi: target_core_user: fix double unlockMike Christie
The caller of queue_cmd_ring grabs and releases the lock, so the tcmu_setup_cmd_timer failure handling inside queue_cmd_ring should not call mutex_unlock. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-26scsi: tcmu: Don't pass KERN_ERR to pr_errMike Christie
Fix warning: smatch warnings: drivers/target/target_core_user.c:301 tcmu_genl_cmd_done() warn: KERN_* level not at start of string Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-26scsi: tcmu: add module wide block/reset_netlink supportMike Christie
This patch based on Xiubo's patches adds 2 tcmu attr to block and reset the netlink interface. It's used during userspace daemon reinitialization after the daemon has crashed while there is outstanding nl requests. The daemon can block the nl interface, kill outstanding requests in the kernel and then reopen the netlink socket and unblock it to allow new requests. [mkp: typo] Signed-off-by: Mike Christie <mchristi@redhat.com> Tested-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-26scsi: tcmu: misc nl code cleanupMike Christie
Some misc cleanup of the nl rework patches. 1. Fix space instead of tabs use and extra newline 2. Drop initializing variables to 0 when not needed 3. Just pass the skb_buff and msg_header pointers to tcmu_netlink_event_send. Signed-off-by: Mike Christie <mchristi@redhat.com> Tested-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-26scsi: tcmu: simplify nl interfaceMike Christie
Just return EBUSY if a nl request comes in while processing one. The upper layers do not support sending multiple create/remove requests at the same time (you cannot have a create and remove at the same time or do multiple creates or removes at the same time) and doing a reconfig while a create/remove is still executing does not make sense. Signed-off-by: Mike Christie <mchristi@redhat.com> Tested-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-26scsi: tcmu: track nl commandsMike Christie
The next patch is going to fix the hung nl command issue so this adds a list of outstanding nl commands that we can later abort when the daemon is restarted. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-26scsi: tcmu: delete unused __waitMike Christie
When this code changed, this was never cleaned up. Signed-off-by: Mike Christie <mchristi@redhat.com> Tested-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-18scsi: tcmu: remove useless code and clean up the code style.Xiubo Li
Since the TCMU_RING_SIZE macro is not using here will discard it and at the same time clean up the code style. Signed-off-by: Xiubo Li <xiubli@redhat.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-18scsi: target: tcmu: add read length supportbstroesser@ts.fujitsu.com
Generally target core and TCMUser seem to work fine for tape devices and media changers. But there is at least one situation where TCMUser is not able to support sequential access device emulation correctly. The situation is when an initiator sends a SCSI READ CDB with a length that is greater than the length of the tape block to read. We can distinguish two subcases: A) The initiator sent the READ CDB with the SILI bit being set. In this case the sequential access device has to transfer the data from the tape block (only the length of the tape block) and transmit a good status. The current interface between TCMUser and the userspace does not support reduction of the read data size by the userspace program. The patch below fixes this subcase by allowing the userspace program to specify a reduced data size in read direction. B) The initiator sent the READ CDB with the SILI bit not being set. In this case the sequential access device has to transfer the data from the tape block as in A), but additionally has to transmit CHECK CONDITION with the ILI bit set and NO SENSE in the sensebytes. The information field in the sensebytes must contain the residual count. With the below patch a user space program can specify the real read data length and appropriate sensebytes. TCMUser then uses the se_cmd flag SCF_TREAT_READ_AS_NORMAL, to force target core to transmit the real data size and the sensebytes. Note: the flag SCF_TREAT_READ_AS_NORMAL is introduced by Lee Duncan's patch "[PATCH v4] target: transport should handle st FM/EOM/ILI reads" from Tue, 15 May 2018 18:25:24 -0700. Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Acked-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-10Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc, xfcp, hisi_sas, cxlflash, qla2xxx. In the absence of Nic, we're also taking target updates which are mostly minor except for the tcmu refactor. The only real core change to worry about is the removal of high page bouncing (in sas, storvsc and iscsi). This has been well tested and no problems have shown up so far" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits) scsi: lpfc: update driver version to 12.0.0.4 scsi: lpfc: Fix port initialization failure. scsi: lpfc: Fix 16gb hbas failing cq create. scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc scsi: lpfc: correct oversubscription of nvme io requests for an adapter scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx) scsi: hisi_sas: Mark PHY as in reset for nexus reset scsi: hisi_sas: Fix return value when get_free_slot() failed scsi: hisi_sas: Terminate STP reject quickly for v2 hw scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot scsi: hisi_sas: Try wait commands before before controller reset scsi: hisi_sas: Init disks after controller reset scsi: hisi_sas: Create a scsi_host_template per HW module scsi: hisi_sas: Reset disks when discovered scsi: hisi_sas: Add LED feature for v3 hw scsi: hisi_sas: Change common allocation mode of device id scsi: hisi_sas: change slot index allocation mode scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate() scsi: hisi_sas: fix a typo in hisi_sas_task_prep() ...
2018-05-14scsi: target: tcmu: fix error resetting qfull_time_out to defaultPrasanna Kumar Kalever
Problem: $ cat /sys/kernel/config/target/core/user_0/block/attrib/qfull_time_out -1 $ echo "-1" > /sys/kernel/config/target/core/user_0/block/attrib/qfull_time_out -bash: echo: write error: Invalid argument Fix: This patch will help reset qfull_time_out to its default i.e. qfull_time_out=-1. Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08scsi: tcmu: refactor nl wr_cache attr with new helpersZhu Lingshan
use new netlink events helpers tcmu_netlink_init() and tcmu_netlink_send() to refactor netlink event attribute TCMU_ATTR_WRITECACHE(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also emulate_write_cache in configFS. Removed tcmu_netlink_event() since we have new netlink events helpers now. Signed-off-by: Zhu Lingshan <lszhu@suse.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08scsi: tcmu: refactor nl dev_size attr with new helpersZhu Lingshan
use new netlink events helpers tcmu_netlink_init() and tcmu_netlink_send() to refactor netlink event attribute TCMU_ATTR_DEV_SIZE(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also dev_size in configFS. Signed-off-by: Zhu Lingshan <lszhu@suse.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08scsi: tcmu: refactor nl dev_cfg attr with new nl helpersZhu Lingshan
use new netlink events helpers tcmu_netlink_init() and tcmu_netlink_send() to refactor netlink event attribute TCMU_ATTR_DEV_CFG(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also dev_config in configFS. Signed-off-by: Zhu Lingshan <lszhu@suse.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08scsi: tcmu: refactor rm_device cmd with new nl helpersZhu Lingshan
use new netlink events helpers tcmu_netlink_init() and tcmu_netlink_send() to refactor netlink event TCMU_CMD_REMOVED_DEVICE Signed-off-by: Zhu Lingshan <lszhu@suse.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08scsi: tcmu: refactor add_device cmd with new nl helpersZhu Lingshan
use new netlink events helpers tcmu_netlink_init() and tcmu_netlink_send() to refactor netlink event TCMU_CMD_ADDED_DEVICE Signed-off-by: Zhu Lingshan <lszhu@suse.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08scsi: tcmu: add new netlink events helpersZhu Lingshan
Add new netlink events helpers tcmu_netlink_event_init() and tcmu_netlink_event_send(). These new functions intend to replace existing netlink events helper function tcmu_netlink_event(). The existing function tcmu_netlink_event() works well for events like TCMU_ADDED_DEVICE and TCMU_REMOVED_DEVICE which only has one netlink attribute. But if there is a command requires more than one attributes to send out, we have to use a struct to adapt the paremeter reconfig_data, it is hard to use one struct or a union in one struct to adapt every command with different attributes, it may get long and ugly. With the new two functions, we can call tcmu_netlink_event_init() to initialize a netlink event, then add all attributes we need by using nla_put_xxx(), at last use tcmu_netlink_event_send() to send it out. So that we don't need to use a long struct or union if we want to send mulitple attributes for different commands. [mkp: typos] Signed-off-by: Zhu Lingshan <lszhu@suse.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-20scsi: target: target_core_user.[ch]: convert comments into DOC:Randy Dunlap
Make documentation on target-supported userspace-I/O design be usable by kernel-doc by using "DOC:". This is used in the driver-api Documentation chapter. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> To: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: linux-scsi@vger.kernel.org Cc: target-devel@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-19scsi: target: Change return type to vm_fault_tSouptick Joarder
Use new return type vm_fault_t for fault handler in struct vm_operations_struct. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-18tcmu: Fix trailing semicolonLuis de Bethencourt
The trailing semicolon is an empty statement that does no operation. It is completely stripped out by the compiler. Removing it since it doesn't do anything. Signed-off-by: Luis de Bethencourt <luisbg@kernel.org> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-18tcmu: fix cmd user after freeMike Christie
If we are failing the command due to a qfull timeout we are also freeing the tcmu command, so we cannot access it later to get the se_cmd. Note: The clearing of cmd->se_cmd is not needed. We do not check it later for something like determining if the command was failed due to a timeout. As a result I am dropping it. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-16tcmu: allow userspace to reset ringMike Christie
This patch adds 2 tcmu attrs to block/unblock a device and reset the ring buffer. They are used when the userspace daemon has crashed or forced to shutdown while IO is executing. On restart, the daemon can block the device so new IO is not sent to userspace while it puts the ring in a clean state. Notes: The reset ring opreation is specific to tcmu, but the block one could be generic. I kept it tcmu specific, because it requires some extra locking/state checks in the main IO path and since other backend modules did not need this functionality I thought only tcmu should take the perf hit. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12tcmu: fix error return code in tcmu_configure_device()Wei Yongjun
Fix to return error code -ENOMEM from the kzalloc() error handling case instead of 0, as done elsewhere in this function. Fixes: 80eb876 ("tcmu: allow max block and global max blocks to be settable") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12target_core_user: add cmd id to broken ring messageMike Christie
Log cmd id that was not found in the tcmu_handle_completions lookup failure path. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12tcmu: prevent corruption when invalid data page requestedMike Christie
We will always have a page mapped for cmd data if it is valid command. If the mapping does not exist then something bad happened in userspace and it should not proceed. This has us return VM_FAULT_SIGBUS when this happens instead of returning a freshly allocated paged. The latter can cause corruption because userspace might write the pages data overwriting valid data or return it to the initiator. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12tcmu: allow max block and global max blocks to be settableMike Christie
Users might have a physical system to a target so they could have a lot more than 2 gigs of memory they want to devote to tcmu. OTOH, we could be running in a vm and so a 2 gig global and 1 gig per dev limit might be too high. This patch allows the user to specify the limits. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12tcmu: make ring buffer timer configurableMike Christie
This adds a timer, qfull_time_out, that controls how long a device will wait for ring buffer space to open before failing the commands in the queue. It is useful to separate this timer from the cmd_time_out and default 30 sec one, because for HA setups cmd_time_out may be disbled and 30 seconds is too long to wait when some OSs like ESX will timeout commands after as little as 8 - 15 seconds. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12tcmu: don't block submitting context for block waitsMike Christie
This patch has tcmu internally queue cmds if its ring buffer is full. It also makes the TCMU_GLOBAL_MAX_BLOCKS limit a hint instead of a hard limit, so we do not have to add any new locks/atomics in the main IO path except when IO is not running. This fixes the following bugs: 1. We cannot sleep from the submitting context because it might be called from a target recv context. This results in transport level commands timing out. For example if the ring is full, we would sleep, and a iscsi initiator would send a iscsi ping/nop which times out because the target's recv thread is sleeping here. 2. Devices were not fairly scheduled to run when they hit the global limit so they could time out waiting for ring space while others got run. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12tcmu: simplify dbi thresh handlingMike Christie
We do not really save a lot by trying to increase thresh a multiple of the existing value. This just simplifies the code by increasing it to whatever is needed for the command being executed. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12tcmu: prep queue_cmd_ring to be used by unmap wqMike Christie
In the next patches we will call queue_cmd_ring from the submitting context and also the completion path. This changes the queue_cmd_ring return code so in the next patches we can return a sense_reason_t and also signal if a command was requeued. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12tcmu: clean up the scatter helperXiubo Li
Add some comments to make the scatter code to be more readable, and drop unused arg to new_iov. Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12tcmu: fix free block calculationMike Christie
The blocks_left calculation does not account for free blocks between 0 and thresh, so we could be queueing/waiting when there are enough blocks free. This has us add in the blocks between 0 and thresh as well as at the end from thresh to DATA_BLOCK_BITS. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 06:37:43 +0000