summaryrefslogtreecommitdiff
path: root/drivers/staging
AgeCommit message (Collapse)Author
2016-04-09Merge tag 'staging-4.6-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver fixes from Greg KH: "Here are some IIO driver fixes, along with two staging driver fixes for 4.6-rc3. One staging driver patch reverts the deletion of a driver that happened in 4.6-rc1. We thought that laptop.org was dead, but it's still alive and kicking, and has users that were mad we broke their hardware by deleting a driver for their machines. So that driver is added back and everyone is happy again. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Revert "Staging: olpc_dcon: Remove obsolete driver" staging/rdma/hfi1: select CRC32 iio: gyro: bmg160: fix buffer read values iio: gyro: bmg160: fix endianness when reading axes iio: accel: bmc150: fix endianness when reading axes iio: st_magn: always define ST_MAGN_TRIGGER_SET_STATE iio: fix config watermark initial value iio: health: max30100: correct FIFO check condition iio: imu: Fix inv_mpu6050 dependencies iio: adc: Fix build error of missing devm_ioremap_resource on UM iio: light: apds9960: correct FIFO check condition iio: adc: max1363: correct reference voltage iio: adc: max1363: add missing adc to max1363_id
2016-04-04Revert "Staging: olpc_dcon: Remove obsolete driver"Greg Kroah-Hartman
This reverts commit 82ef33af9dd30075adbd9f3dd161b606b8ba88ac. It turns out these machines are still out there, and the original patch broke them. So revert it, adding back the driver, so people's machines still work properly. Reported-by: James Cameron <quozl@laptop.org> Cc: Shraddha Barke <shraddha.6596@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-04staging/rdma/hfi1: select CRC32Markus Böhme
The function parse_platform_config in firmware.c calls crc32_le. Building without CRC32 selected causes a link error: drivers/built-in.o: In function `parse_platform_config': (.text+0x92ffa): undefined reference to `crc32_le' Signed-off-by: Markus Böhme <markus.boehme@mailbox.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-04mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usageKirill A. Shutemov
Mostly direct substitution with occasional adjustment or removing outdated comments. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Just a couple of dma-buf related fixes and some amdgpu fixes, along with a regression fix for radeon off but default feature, but makes my 30" monitor happy again" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: drm/radeon/mst: cleanup code indentation drm/radeon/mst: fix regression in lane/link handling. drm/amdgpu: add invalidate_page callback for userptrs drm/amdgpu: Revert "remove the userptr rmn->lock" drm/amdgpu: clean up path handling for powerplay drm/amd/powerplay: fix memory leak of tdp_table dma-buf/fence: fix fence_is_later v2 dma-buf: Update docs for SYNC ioctl drm: remove excess description dma-buf, drm, ion: Propagate error code from dma_buf_start_cpu_access() drm/atmel-hlcdc: use helper to get crtc state drm/atomic: use helper to get crtc state
2016-03-24Merge tag 'for-linus-20160324' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: "NAND: - Add sunxi_nand randomizer support - begin refactoring NAND ecclayout structs - fix pxa3xx_nand dmaengine usage - brcmnand: fix support for v7.1 controller - add Qualcomm NAND controller driver SPI NOR: - add new ls1021a, ls2080a support to Freescale QuadSPI - add new flash ID entries - support bottom-block protection for Winbond flash - support Status Register Write Protect - remove broken QPI support for Micron SPI flash JFFS2: - improve post-mount CRC scan efficiency General: - refactor bcm63xxpart parser, to later extend for NAND - add writebuf size parameter to mtdram Other minor code quality improvements" * tag 'for-linus-20160324' of git://git.infradead.org/linux-mtd: (72 commits) mtd: nand: remove kerneldoc for removed function parameter mtd: nand: Qualcomm NAND controller driver dt/bindings: qcom_nandc: Add DT bindings mtd: nand: don't select chip in nand_chip's block_bad op mtd: spi-nor: support lock/unlock for a few Winbond chips mtd: spi-nor: add TB (Top/Bottom) protect support mtd: spi-nor: add SPI_NOR_HAS_LOCK flag mtd: spi-nor: use BIT() for flash_info flags mtd: spi-nor: disallow further writes to SR if WP# is low mtd: spi-nor: make lock/unlock bounds checks more obvious and robust mtd: spi-nor: silently drop lock/unlock for already locked/unlocked region mtd: spi-nor: wait for SR_WIP to clear on initial unlock mtd: nand: simplify nand_bch_init() usage mtd: mtdswap: remove useless if (!mtd->ecclayout) test mtd: create an mtd_oobavail() helper and make use of it mtd: kill the ecclayout->oobavail field mtd: nand: check status before reporting timeout mtd: bcm63xxpart: give width specifier an 'int', not 'size_t' mtd: mtdram: Add parameter for setting writebuf size mtd: nand: pxa3xx_nand: kill unused field 'drcmr_cmd' ...
2016-03-24Merge tag 'staging-4.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some fixes that poped up due to the big staging tree merge, as well as the removal of a staging driver that now is covered by a "real" driver. All of these have been in linux-next for a few days with no reported issues" * tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: delete STE RMI4 hackish driver staging: android: ion_test: fix check of platform_device_register_simple() error code staging: wilc1000: fix a couple of memory leaks staging: fsl-mc: fix incorrect type passed to dev_err macros staging: fsl-mc: fix incorrect type passed to dev_dbg macros staging: wilc1000: fixed kernel panic when firmware is not started staging: comedi: ni_mio_common: fix the ni_write[blw]() functions staging: most: hdm-dim2: Remove possible dereference error staging: lustre: checking for NULL instead of IS_ERR staging: lustre: really make lustre dependent on LNet staging: refresh TODO for rtl8712 staging: refresh TODO for rtl8723au
2016-03-22staging: delete STE RMI4 hackish driverLinus Walleij
As of commit 62d5bdf972ebcfc99f72f734ae979713e4ca6450 "Merge branch 'synaptics-rmi4' into next" the input subsystem has a proper RMI4 infrastructure and touchscreen driver. The ST Ux500 platform has been converted to use the new driver and its devicetree bindings. Delete this ancient hack. Cc: Andrew Duggan <aduggan@synaptics.com> Cc: Christopher Heiny <cheiny@synaptics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22staging: android: ion_test: fix check of platform_device_register_simple() ↵Vladimir Zapolskiy
error code On error platform_device_register_simple() returns ERR_PTR() value, check for NULL always fails. The change corrects the check itself and propagates the returned error upwards. Fixes: 81fb0b901397 ("staging: android: ion_test: unregister the platform device") Cc: stable <stable@vger.kernel.org> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22staging: wilc1000: fix a couple of memory leaksColin Ian King
The ENOMEM error return paths are not free'ing allocated memory resulting in a memory leak of allocated structures. Perform the required kfree to fix the memory leaks. Issue discovered with static analysis using CoverityScan Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22staging: fsl-mc: fix incorrect type passed to dev_err macrosCihangir Akturk
dev_err macros expect const struct device ** as its second argument, but here the argument we are passing is of typ struct device **. This patch fixes this error. Fixes: 454b0ec8bf99 ("Staging: fsl-mc: Replace pr_err with dev_err") Cc: Bhumika Goyal <bhumirks@gmail.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Cihangir Akturk <cakturk@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22staging: fsl-mc: fix incorrect type passed to dev_dbg macrosCihangir Akturk
dev_dbg macros expect const struct device ** as its second argument but here the argument we are passing is of type struct device ** this patch fixes this error. Fixes: de71daf5c839 ("Staging: fsl-mc: Replace pr_debug with dev_dbg") Cc: Bhumika Goyal <bhumirks@gmail.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Cihangir Akturk <cakturk@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22staging: wilc1000: fixed kernel panic when firmware is not startedLeo Kim
This patch fixed the problems caused by if firmware is not started. That is why, in nl80211 put current TX power in interface info. If firmware is not started, this function(get_tx_power) does not work. Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22staging: comedi: ni_mio_common: fix the ni_write[blw]() functionsH Hartley Sweeten
Memory mapped io (dev->mmio) should not also be writing to the ioport (dev->iobase) registers. Add the missing 'else' to these functions. Fixes: 0953ee4acca0 ("staging: comedi: ni_mio_common: checkpatch.pl cleanup (else not useful)") Cc: <stable@vger.kernel.org> # 3.17+ Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22staging: most: hdm-dim2: Remove possible dereference errorAmitoj Kaur Chawla
Commit 3eced21a5afb ("staging: most: hdm-dim2: Replace request_irq with devm_request_irq") introduced the following static checker warning: drivers/staging/most/hdm-dim2/dim2_hdm.c:841 dim2_probe() error: 'dev->netinfo_task' dereferencing possible ERR_PTR() Remove the bug introduced by the commit due to change in control flow by returning PTR_ERR immediately rather than returning at the end of the function since we do not need to free anything. Fixes: 3eced21a5afb Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22staging: lustre: checking for NULL instead of IS_ERRDan Carpenter
lustre_cfg_new() returns error pointers on error, it never returns NULL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22staging: lustre: really make lustre dependent on LNetArnd Bergmann
A patch intended to add a dependency on LNET for lustre didn't actually do that and instead allowed configurations that contain lustre with lnet but without IPv4 support that subsequently fail to link: warning: (LUSTRE_FS) selects LNET which has unmet direct dependencies (STAGING && INET && m && MODULES) ERROR: "kernel_sendmsg" [drivers/staging/lustre/lnet/lnet/lnet.ko] undefined! ERROR: "sock_create_lite" [drivers/staging/lustre/lnet/lnet/lnet.ko] undefined! ERROR: "sock_release" [drivers/staging/lustre/lnet/lnet/lnet.ko] undefined! ERROR: "release_sock" [drivers/staging/lustre/lnet/klnds/socklnd/ksocklnd.ko] undefined! ERROR: "kernel_sendmsg" [drivers/staging/lustre/lnet/klnds/socklnd/ksocklnd.ko] undefined! ERROR: "tcp_sendpage" [drivers/staging/lustre/lnet/klnds/socklnd/ksocklnd.ko] undefined! This adds the one-line change that was evidently missing from the commit, doing what was intended there to have a correct set of dependencies. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: b08bb6bb5af5 ("staging: lustre: make lustre dependent on LNet") Acked-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22staging: refresh TODO for rtl8712Xose Vazquez Perez
People should not waste time and energy working on this staging driver. At least four drivers were written for this hardware: https://marc.info/?l=linux-wireless&m=138358275410975 And there is a replacement using the kernel wireless stack at: https://github.com/chunkeey/rtl8192su Also a fullmac/cfg80211 driver(r92su) is available. Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: Joshua Roys <Joshua.Roys@gtri.gatech.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linux Driver Project Developer List <driverdev-devel@linuxdriverproject.org> Cc: Linux Wireless <linux-wireless@vger.kernel.org> Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22staging: refresh TODO for rtl8723auXose Vazquez Perez
People should not waste time and energy working on this staging driver. A replacement(rtl8xxxu) using the kernel wireless stack already was merged in the 4.3 kernel. Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge third patch-bomb from Andrew Morton: - more ocfs2 changes - a few hotfixes - Andy's compat cleanups - misc fixes to fatfs, ptrace, coredump, cpumask, creds, eventfd, panic, ipmi, kgdb, profile, kfifo, ubsan, etc. - many rapidio updates: fixes, new drivers. - kcov: kernel code coverage feature. Like gcov, but not "prohibitively expensive". - extable code consolidation for various archs * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (81 commits) ia64/extable: use generic search and sort routines x86/extable: use generic search and sort routines s390/extable: use generic search and sort routines alpha/extable: use generic search and sort routines kernel/...: convert pr_warning to pr_warn drivers: dma-coherent: use memset_io for DMA_MEMORY_IO mappings drivers: dma-coherent: use MEMREMAP_WC for DMA_MEMORY_MAP memremap: add MEMREMAP_WC flag memremap: don't modify flags kernel/signal.c: add compile-time check for __ARCH_SI_PREAMBLE_SIZE mm/mprotect.c: don't imply PROT_EXEC on non-exec fs ipc/sem: make semctl setting sempid consistent ubsan: fix tree-wide -Wmaybe-uninitialized false positives kfifo: fix sparse complaints scripts/gdb: account for changes in module data structure scripts/gdb: add cmdline reader command scripts/gdb: add version command kernel: add kcov code coverage profile: hide unused functions when !CONFIG_PROC_FS hpwdt: use nmi_panic() when kernel panics in NMI handler ...
2016-03-22Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull more rdma updates from Doug Ledford: "Round two of 4.6 merge window patches. This is a monster pull request. I held off on the hfi1 driver updates (the hfi1 driver is intimately tied to the qib driver and the new rdmavt software library that was created to help both of them) in my first pull request. The hfi1/qib/rdmavt update is probably 90% of this pull request. The hfi1 driver is being left in staging so that it can be fixed up in regards to the API that Al and yourself didn't like. Intel has agreed to do the work, but in the meantime, this clears out 300+ patches in the backlog queue and brings my tree and their tree closer to sync. This also includes about 10 patches to the core and a few to mlx5 to create an infrastructure for configuring SRIOV ports on IB devices. That series includes one patch to the net core that we sent to netdev@ and Dave Miller with each of the three revisions to the series. We didn't get any response to the patch, so we took that as implicit approval. Finally, this series includes Intel's new iWARP driver for their x722 cards. It's not nearly the beast as the hfi1 driver. It also has a linux-next merge issue, but that has been resolved and it now passes just fine. Summary: - A few minor core fixups needed for the next patch series - The IB SRIOV series. This has bounced around for several versions. Of note is the fact that the first patch in this series effects the net core. It was directed to netdev and DaveM for each iteration of the series (three versions total). Dave did not object, but did not respond either. I've taken this as permission to move forward with the series. - The new Intel X722 iWARP driver - A huge set of updates to the Intel hfi1 driver. Of particular interest here is that we have left the driver in staging since it still has an API that people object to. Intel is working on a fix, but getting these patches in now helps keep me sane as the upstream and Intel's trees were over 300 patches apart" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (362 commits) IB/ipoib: Allow mcast packets from other VFs IB/mlx5: Implement callbacks for manipulating VFs net/mlx5_core: Implement modify HCA vport command net/mlx5_core: Add VF param when querying vport counter IB/ipoib: Add ndo operations for configuring VFs IB/core: Add interfaces to control VF attributes IB/core: Support accessing SA in virtualized environment IB/core: Add subnet prefix to port info IB/mlx5: Fix decision on using MAD_IFC net/core: Add support for configuring VF GUIDs IB/{core, ulp} Support above 32 possible device capability flags IB/core: Replace setting the zero values in ib_uverbs_ex_query_device net/mlx5_core: Introduce offload arithmetic hardware capabilities net/mlx5_core: Refactor device capability function net/mlx5_core: Fix caching ATOMIC endian mode capability ib_srpt: fix a WARN_ON() message i40iw: Replace the obsolete crypto hash interface with shash IB/hfi1: Add SDMA cache eviction algorithm IB/hfi1: Switch to using the pin query function IB/hfi1: Specify mm when releasing pages ...
2016-03-22staging/lustre: switch from is_compat_task to in_compat_syscallAndy Lutomirski
AFAICT, lustre is trying to determine syscall bitness. Use the new accessor. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-21Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.6 kernel. Overall the coolest thing here for me is the nouveau maxwell signed firmware support from NVidia, it's taken a long while to extract this from them. I also wish the ARM vendors just designed one set of display IP, ARM display block proliferation is definitely increasing. Core: - drm_event cleanups - Internal API cleanup making mode_fixup optional. - Apple GMUX vga switcheroo support. - DP AUX testing interface Panel: - Refactoring of DSI core for use over more transports. New driver: - ARM hdlcd driver i915: - FBC/PSR (framebuffer compression, panel self refresh) enabled by default. - Ongoing atomic display support work - Ongoing runtime PM work - Pixel clock limit checks - VBT DSI description support - GEM fixes - GuC firmware scheduler enhancements amdkfd: - Deferred probing fixes to avoid make file or link ordering. amdgpu/radeon: - ACP support for i2s audio support. - Command Submission/GPU scheduler/GPUVM optimisations - Initial GPU reset support for amdgpu vmwgfx: - Support for DX10 gen mipmaps - Pageflipping and other fixes. exynos: - Exynos5420 SoC support for FIMD - Exynos5422 SoC support for MIPI-DSI nouveau: - GM20x secure boot support - adds acceleration for Maxwell GPUs. - GM200 support - GM20B clock driver support - Power sensors work etnaviv: - Correctness fixes for GPU cache flushing - Better support for i.MX6 systems. imx-drm: - VBlank IRQ support - Fence support - OF endpoint support msm: - HDMI support for 8996 (snapdragon 820) - Adreno 430 support - Timestamp queries support virtio-gpu: - Fixes for Android support. rockchip: - Add support for Innosilicion HDMI rcar-du: - Support for 4 crtcs - R8A7795 support - RCar Gen 3 support omapdrm: - HDMI interlace output support - dma-buf import support - Refactoring to remove a lot of legacy code. tilcdc: - Rewrite of pageflipping code - dma-buf support - pinctrl support vc4: - HDMI modesetting bug fixes - Significant 3D performance improvement. fsl-dcu (FreeScale): - Lots of fixes tegra: - Two small fixes sti: - Atomic support for planes - Improved HDMI support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1063 commits) drm/amdgpu: release_pages requires linux/pagemap.h drm/sti: restore mode_fixup callback drm/amdgpu/gfx7: add MTYPE definition drm/amdgpu: removing BO_VAs shouldn't be interruptible drm/amd/powerplay: show uvd/vce power gate enablement for tonga. drm/amd/powerplay: show uvd/vce power gate info for fiji drm/amdgpu: use sched fence if possible drm/amdgpu: move ib.fence to job.fence drm/amdgpu: give a fence param to ib_free drm/amdgpu: include the right version of gmc header files for iceland drm/radeon: fix indentation. drm/amd/powerplay: add uvd/vce dpm enabling flag to fix the performance issue for CZ drm/amdgpu: switch back to 32bit hw fences v2 drm/amdgpu: remove amdgpu_fence_is_signaled drm/amdgpu: drop the extra fence range check v2 drm/amdgpu: signal fences directly in amdgpu_fence_process drm/amdgpu: cleanup amdgpu_fence_wait_empty v2 drm/amdgpu: keep all fences in an RCU protected array v2 drm/amdgpu: add number of hardware submissions to amdgpu_fence_driver_init_ring drm/amdgpu: RCU protected amd_sched_fence_release ...
2016-03-21IB/hfi1: Add SDMA cache eviction algorithmMitko Haralanov
This commit adds a cache eviction algorithm for the SDMA user buffer cache. Besides the interval RB tree used for node lookup, the cache nodes are also arranged in a doubly-linked list. When a node is used, it is put at the beginning of the list. Less frequently used nodes naturally move to the tail of the list. When the cache limit is reached, the eviction code starts traversing the linked list in reverse, freeing buffers until enough space has been freed to fit the new user buffer. This guarantees that only the least used cache nodes will be removed from the cache. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-21IB/hfi1: Switch to using the pin query functionMitko Haralanov
Use the new function to query whether the expected receive user buffer can be pinned successfully. This requires that a new variable be added to the hfi1_filedata structure used to hold the number of pages pinned by the expected receive code. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-21IB/hfi1: Specify mm when releasing pagesMitko Haralanov
This change adds a pointer to the process mm_struct when calling hfi1_release_user_pages(). Previously, the function used the mm_struct of the current process to adjust the number of pinned pages. However, is some cases, namely when unpinning pages due to a MMU notifier call, we want to drop into that code block as it will cause a deadlock (the MMU notifiers take the process' mmap_sem prior to calling the callbacks). By allowing to caller to specify the pointer to the mm_struct, the caller has finer control over that part of hfi1_release_user_pages(). Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-21IB/hfi1: Add pin query functionMitko Haralanov
System administrators can use the locked memory ulimit setting to set the maximum amount of memory a user can lock/pin. However, this setting alone is not enough to guarantee good operation of the hfi1 driver due to the fact that the setting does not have fine enough granularity to account for the limit being used by multiple user processes and caches. Therefore, a better limiting algorithm is needed. This is where the new hfi1_can_pin_pages() function and the cache_size module parameter come in. The function works by looking at the ulimit and cache_size value to compute a cache size. The algorithm examines the ulimit value and, if it is not "unlimited", computes a per-cache limit based on the number of configured user contexts. After that, the lower of the two - cache_size and computed per-cache limit - is used. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-21IB/hfi1: Implement SDMA-side buffer cachingMitko Haralanov
Add support for caching of user buffers used for SDMA transfers. This change improves performance by avoiding repeatedly pinning the pages of buffers, which are being re-used by the application. While the cost of the pinning operation has been made heavier by adding the extra code to search the cache tree, re-allocate pages arrays, and future cache evictions, that cost will be amortized against the savings when the same buffer is re-used. It is also worth noting that in most cases, the cost of pinning should be much lower due to the buffer already being in the cache. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-21IB/hfi1: Adjust last address values for intervalsMitko Haralanov
Last address values for intervals in the interval RB tree nodes should be non-inclusive in order to avoid confusing ranges. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-21IB/hfi1: Add filter callbackMitko Haralanov
This commit adds a filter callback, which can be used to filter out interval RB nodes matching a certain interval down to a single one. This is needed for the upcoming SDMA-side caching where buffers will need to be filtered by their virtual address. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-21IB/hfi1: Remove compare callbackMitko Haralanov
Interval RB trees provide their own searching function, which also takes care of determining the path through the tree that should be taken. This make the compare callback unnecessary. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-21IB/hfi1: Add MMU tracingMitko Haralanov
Add a new tracepoint type for the MMU functions and calls to that tracepoint to allow tracing of MMU functionality. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-21IB/hfi1: Use interval RB treesMitko Haralanov
The interval RB trees can handle RB nodes which hold ranged information. This is exactly the usage for the buffer cache implemented in the expected receive code path. Convert the MMU/RB functions to use the interval RB tree API. This will help with future users of the caching API, as well. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-21IB/hfi1: Notify remove MMU/RB callback of calling contextMitko Haralanov
Tell the remove MMU/RB callback if it's being called as part of a memory invalidation or not. This can be important in preventing a deadlock if the remove callback attempts to take the map_sem semaphore because the kernel's MMU invalidation functions have already taken it. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-21IB/hfi1: Remove the use of add/remove RB function pointersMitko Haralanov
The usage of function pointers for RB node insertion and removal in the expected receive code path was meant to be a small performance optimization. However, maintaining it, especially with the new MMU API, would become more troublesome as the API is extended. Since the performance optimization is minor, remove the function pointers and replace with direct calls. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-21IB/hfi1: Allow remove MMU callbacks to free nodesMitko Haralanov
In order to allow the remove MMU callbacks to free the RB nodes, it is necessary to prevent any references to the nodes after the remove callback has been called. Therefore, remove the node from the tree prior to calling the callback. In other words, the MMU/RB API now guarantees that all RB node operations it performs will be done prior to calling the remove callback and that the RB node will not be touched afterwards. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-21IB/hfi1: Prevent NULL pointer dereferenceMitko Haralanov
Prevent a potential NULL pointer dereference (found by code inspection) when unregistering an MMU handler. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-21IB/hfi1: Allow MMU function execution in IRQ contextMitko Haralanov
Future users of the MMU/RB functions might be searching or manipulating the MMU RB trees in interrupt context. Therefore, the MMU/RB functions need to be able to run in interrupt context. This requires that we use the IRQ-aware API for spin locks. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-21IB/hfi1: Re-factor MMU notification codeMitko Haralanov
The MMU notification code added to the expected receive side has been re-factored and split into it's own file. This was done in order to make the code more general and, therefore, usable by other parts of the driver. The caching behavior remains the same. However, the handling of the RB tree (insertion, deletions, and searching) as well as the MMU invalidation processing is now handled by functions in the mmu_rb.[ch] files. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-20Merge branch 'mm-pkeys-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 protection key support from Ingo Molnar: "This tree adds support for a new memory protection hardware feature that is available in upcoming Intel CPUs: 'protection keys' (pkeys). There's a background article at LWN.net: https://lwn.net/Articles/643797/ The gist is that protection keys allow the encoding of user-controllable permission masks in the pte. So instead of having a fixed protection mask in the pte (which needs a system call to change and works on a per page basis), the user can map a (handful of) protection mask variants and can change the masks runtime relatively cheaply, without having to change every single page in the affected virtual memory range. This allows the dynamic switching of the protection bits of large amounts of virtual memory, via user-space instructions. It also allows more precise control of MMU permission bits: for example the executable bit is separate from the read bit (see more about that below). This tree adds the MM infrastructure and low level x86 glue needed for that, plus it adds a high level API to make use of protection keys - if a user-space application calls: mmap(..., PROT_EXEC); or mprotect(ptr, sz, PROT_EXEC); (note PROT_EXEC-only, without PROT_READ/WRITE), the kernel will notice this special case, and will set a special protection key on this memory range. It also sets the appropriate bits in the Protection Keys User Rights (PKRU) register so that the memory becomes unreadable and unwritable. So using protection keys the kernel is able to implement 'true' PROT_EXEC on x86 CPUs: without protection keys PROT_EXEC implies PROT_READ as well. Unreadable executable mappings have security advantages: they cannot be read via information leaks to figure out ASLR details, nor can they be scanned for ROP gadgets - and they cannot be used by exploits for data purposes either. We know about no user-space code that relies on pure PROT_EXEC mappings today, but binary loaders could start making use of this new feature to map binaries and libraries in a more secure fashion. There is other pending pkeys work that offers more high level system call APIs to manage protection keys - but those are not part of this pull request. Right now there's a Kconfig that controls this feature (CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) that is default enabled (like most x86 CPU feature enablement code that has no runtime overhead), but it's not user-configurable at the moment. If there's any serious problem with this then we can make it configurable and/or flip the default" * 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits) x86/mm/pkeys: Fix mismerge of protection keys CPUID bits mm/pkeys: Fix siginfo ABI breakage caused by new u64 field x86/mm/pkeys: Fix access_error() denial of writes to write-only VMA mm/core, x86/mm/pkeys: Add execute-only protection keys support x86/mm/pkeys: Create an x86 arch_calc_vm_prot_bits() for VMA flags x86/mm/pkeys: Allow kernel to modify user pkey rights register x86/fpu: Allow setting of XSAVE state x86/mm: Factor out LDT init from context init mm/core, x86/mm/pkeys: Add arch_validate_pkey() mm/core, arch, powerpc: Pass a protection key in to calc_vm_flag_bits() x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU x86/mm/pkeys: Add Kconfig prompt to existing config option x86/mm/pkeys: Dump pkey from VMA in /proc/pid/smaps x86/mm/pkeys: Dump PKRU with other kernel registers mm/core, x86/mm/pkeys: Differentiate instruction fetches x86/mm/pkeys: Optimize fault handling in access_error() mm/core: Do not enforce PKEY permissions on remote mm access um, pkeys: Add UML arch_*_access_permitted() methods mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys x86/mm/gup: Simplify get_user_pages() PTE bit handling ...
2016-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Support more Realtek wireless chips, from Jes Sorenson. 2) New BPF types for per-cpu hash and arrap maps, from Alexei Starovoitov. 3) Make several TCP sysctls per-namespace, from Nikolay Borisov. 4) Allow the use of SO_REUSEPORT in order to do per-thread processing of incoming TCP/UDP connections. The muxing can be done using a BPF program which hashes the incoming packet. From Craig Gallek. 5) Add a multiplexer for TCP streams, to provide a messaged based interface. BPF programs can be used to determine the message boundaries. From Tom Herbert. 6) Add 802.1AE MACSEC support, from Sabrina Dubroca. 7) Avoid factorial complexity when taking down an inetdev interface with lots of configured addresses. We were doing things like traversing the entire address less for each address removed, and flushing the entire netfilter conntrack table for every address as well. 8) Add and use SKB bulk free infrastructure, from Jesper Brouer. 9) Allow offloading u32 classifiers to hardware, and implement for ixgbe, from John Fastabend. 10) Allow configuring IRQ coalescing parameters on a per-queue basis, from Kan Liang. 11) Extend ethtool so that larger link mode masks can be supported. From David Decotigny. 12) Introduce devlink, which can be used to configure port link types (ethernet vs Infiniband, etc.), port splitting, and switch device level attributes as a whole. From Jiri Pirko. 13) Hardware offload support for flower classifiers, from Amir Vadai. 14) Add "Local Checksum Offload". Basically, for a tunneled packet the checksum of the outer header is 'constant' (because with the checksum field filled into the inner protocol header, the payload of the outer frame checksums to 'zero'), and we can take advantage of that in various ways. From Edward Cree" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits) bonding: fix bond_get_stats() net: bcmgenet: fix dma api length mismatch net/mlx4_core: Fix backward compatibility on VFs phy: mdio-thunder: Fix some Kconfig typos lan78xx: add ndo_get_stats64 lan78xx: handle statistics counter rollover RDS: TCP: Remove unused constant RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket net: smc911x: convert pxa dma to dmaengine team: remove duplicate set of flag IFF_MULTICAST bonding: remove duplicate set of flag IFF_MULTICAST net: fix a comment typo ethernet: micrel: fix some error codes ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it bpf, dst: add and use dst_tclassid helper bpf: make skb->tc_classid also readable net: mvneta: bm: clarify dependencies cls_bpf: reset class and reuse major in da ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c ldmvsw: Add ldmvsw.c driver code ...
2016-03-19dma-buf, drm, ion: Propagate error code from dma_buf_start_cpu_access()Chris Wilson
Drivers, especially i915.ko, can fail during the initial migration of a dma-buf for CPU access. However, the error code from the driver was not being propagated back to ioctl and so userspace was blissfully ignorant of the failure. Rendering corruption ensues. Whilst fixing the ioctl to return the error code from dma_buf_start_cpu_access(), also do the same for dma_buf_end_cpu_access(). For most drivers, dma_buf_end_cpu_access() cannot fail. i915.ko however, as most drivers would, wants to avoid being uninterruptible (as would be required to guarrantee no failure when flushing the buffer to the device). As userspace already has to handle errors from the SYNC_IOCTL, take advantage of this to be able to restart the syscall across signals. This fixes a coherency issue for i915.ko as well as reducing the uninterruptible hold upon its BKL, the struct_mutex. Fixes commit c11e391da2a8fe973c3c2398452000bed505851e Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Feb 11 20:04:51 2016 -0200 dma-buf: Add ioctls to allow userspace to flush Testcase: igt/gem_concurrent_blit/*dmabuf*interruptible Testcase: igt/prime_mmap_coherency/ioctl-errors Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tiago Vignatti <tiago.vignatti@intel.com> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Daniel Vetter <daniel.vetter@intel.com> CC: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Cc: intel-gfx@lists.freedesktop.org Cc: devel@driverdev.osuosl.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1458331359-2634-1-git-send-email-chris@chris-wilson.co.uk
2016-03-17Merge tag 'staging-4.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big staging driver pull request for 4.6-rc1. Lots of little things here, over 1600 patches or so. Notable is all of the good Lustre work happening, those developers have finally woken up and are cleaning up their code greatly. The Outreachy intern application process is also happening, which brought in another 400 or so patches. Full details are in the very long shortlog. All of these have been in linux-next with no reported issues" * tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1673 commits) staging: lustre: fix aligments in lnet selftest staging: lustre: report minimum of two buffers for LNet selftest load test staging: lustre: test for proper errno code in lstcon_rpc_trans_abort staging: lustre: filter remaining extra spacing for lnet selftest staging: lustre: remove extra spacing when setting variable for lnet selftest staging: lustre: remove extra spacing of variable declartions for lnet selftest staging: lustre: fix spacing issues checkpatch reported in lnet selftest staging: lustre: remove returns in void function for lnet selftest staging: lustre: fix bogus lst errors for lnet selftest staging: netlogic: Replacing pr_err with dev_err after the call to devm_kzalloc staging: mt29f_spinand: Replacing pr_info with dev_info after the call to devm_kzalloc staging: android: ion: fix up file mode staging: ion: debugfs invalid gfp mask staging: rts5208: Replace pci_enable_device with pcim_enable_device Staging: ieee80211: Place constant on right side of the test. staging: speakup: Replace del_timer with del_timer_sync staging: lowmemorykiller: fix 2 checks that checkpatch complained staging: mt29f_spinand: Drop void pointer cast staging: rdma: hfi1: file_ops: Replace ALIGN with PAGE_ALIGN staging: rdma: hfi1: driver: Replace IS_ALIGNED with PAGE_ALIGNED ...
2016-03-17Merge tag 'tty-4.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here's the big tty/serial driver pull request for 4.6-rc1. Lots of changes in here, Peter has been on a tear again, with lots of refactoring and bugs fixes, many thanks to the great work he has been doing. Lots of driver updates and fixes as well, full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (220 commits) serial: 8250: describe CONFIG_SERIAL_8250_RSA serial: samsung: optimize UART rx fifo access routine serial: pl011: add mark/space parity support serial: sa1100: make sa1100_register_uart_fns a function tty: serial: 8250: add MOXA Smartio MUE boards support serial: 8250: convert drivers to use up_to_u8250p() serial: 8250/mediatek: fix building with SERIAL_8250=m serial: 8250/ingenic: fix building with SERIAL_8250=m serial: 8250/uniphier: fix modular build Revert "drivers/tty/serial: make 8250/8250_ingenic.c explicitly non-modular" Revert "drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular" serial: mvebu-uart: initial support for Armada-3700 serial port serial: mctrl_gpio: Add missing module license serial: ifx6x60: avoid uninitialized variable use tty/serial: at91: fix bad offset for UART timeout register tty/serial: at91: restore dynamic driver binding serial: 8250: Add hardware dependency to RT288X option TTY, devpts: document pty count limiting tty: goldfish: support platform_device with id -1 drivers: tty: goldfish: Add device tree bindings ...
2016-03-17Merge tag 'char-misc-4.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big char/misc driver update for 4.6-rc1. The majority of the patches here is hwtracing and some new mic drivers, but there's a lot of other driver updates as well. Full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'char-misc-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (238 commits) goldfish: Fix build error of missing ioremap on UM nvmem: mediatek: Fix later provider initialization nvmem: imx-ocotp: Fix return value of imx_ocotp_read nvmem: Fix dependencies for !HAS_IOMEM archs char: genrtc: replace blacklist with whitelist drivers/hwtracing: make coresight-etm-perf.c explicitly non-modular drivers: char: mem: fix IS_ERROR_VALUE usage char: xillybus: Fix internal data structure initialization pch_phub: return -ENODATA if ROM can't be mapped Drivers: hv: vmbus: Support kexec on ws2012 r2 and above Drivers: hv: vmbus: Support handling messages on multiple CPUs Drivers: hv: utils: Remove util transport handler from list if registration fails Drivers: hv: util: Pass the channel information during the init call Drivers: hv: vmbus: avoid unneeded compiler optimizations in vmbus_wait_for_unload() Drivers: hv: vmbus: remove code duplication in message handling Drivers: hv: vmbus: avoid wait_for_completion() on crash Drivers: hv: vmbus: don't loose HVMSG_TIMER_EXPIRED messages misc: at24: replace memory_accessor with nvmem_device_read eeprom: 93xx46: extend driver to plug into the NVMEM framework eeprom: at25: extend driver to plug into the NVMEM framework ...
2016-03-17IB/hfi1: Enable adaptive pio by defaultMike Marciniszyn
Set the piothreshold to the agreed upon default of 256B. Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-17IB/hfi1: Fix adaptive pio packet corruptionMike Marciniszyn
The adaptive pio heuristic missed a case that causes a corrupted packet on the wire. The case is if SDMA egress had been chosen for a pio-able packet and then encountered a ring space wait, the packet is queued. The sge cursor had been incremented as part of the packet build out for SDMA. After the send engine restart, the heuristic might now chose pio based on the sdma count being zero and start the mmio copy using the already incremented sge cursor. Fix this by forcing SDMA egress when the SDMA descriptor has already been built. Additionally, the code to wait for a QPs pio count to zero when switching to SDMA was missing. Add it. There is also an issue with UD QPs, in that the different SLs can pick a different egress send context. For now, just insure the UD/GSI always go through SDMA. Reviewed-by: Vennila Megavannan <vennila.megavannan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-17IB/hfi1: Fix panic in adaptive pioMike Marciniszyn
The following panic occurs while running ib_send_bw -a with adaptive pio turned on: [ 8551.143596] BUG: unable to handle kernel NULL pointer dereference at (null) [ 8551.152986] IP: [<ffffffffa0902a94>] pio_wait.isra.21+0x34/0x190 [hfi1] [ 8551.160926] PGD 80db21067 PUD 80bb45067 PMD 0 [ 8551.166431] Oops: 0000 [#1] SMP [ 8551.276725] task: ffff880816bf15c0 ti: ffff880812ac0000 task.ti: ffff880812ac0000 [ 8551.285705] RIP: 0010:[<ffffffffa0902a94>] pio_wait.isra.21+0x34/0x190 [hfi1] [ 8551.296462] RSP: 0018:ffff880812ac3b58 EFLAGS: 00010282 [ 8551.303029] RAX: 000000000000002d RBX: 0000000000000000 RCX: 0000000000000800 [ 8551.311633] RDX: ffff880812ac3c08 RSI: 0000000000000000 RDI: ffff8800b6665e40 [ 8551.320228] RBP: ffff880812ac3ba0 R08: 0000000000001000 R09: ffffffffa09039a0 [ 8551.328820] R10: ffff880817a0c000 R11: 0000000000000000 R12: ffff8800b6665e40 [ 8551.337406] R13: ffff880817a0c000 R14: ffff8800b6665800 R15: ffff8800b6665e40 [ 8551.355640] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8551.362674] CR2: 0000000000000000 CR3: 000000080abe8000 CR4: 00000000001406e0 [ 8551.371262] Stack: [ 8551.374119] ffff880812ac3bf0 ffff88080cf54010 ffff880800000800 ffff880812ac3c08 [ 8551.383036] ffff8800b6665800 ffff8800b6665e40 0000000000000202 ffffffffa08e7b80 [ 8551.391941] 00000001007de431 ffff880812ac3bc8 ffffffffa0904645 ffff8800b6665800 [ 8551.400859] Call Trace: [ 8551.404214] [<ffffffffa08e7b80>] ? hfi1_del_timers_sync+0x30/0x30 [hfi1] [ 8551.412417] [<ffffffffa0904645>] hfi1_verbs_send+0x215/0x330 [hfi1] [ 8551.420154] [<ffffffffa08ec126>] hfi1_do_send+0x166/0x350 [hfi1] [ 8551.427618] [<ffffffffa055a533>] rvt_post_send+0x533/0x6a0 [rdmavt] [ 8551.435367] [<ffffffffa050760f>] ib_uverbs_post_send+0x30f/0x530 [ib_uverbs] [ 8551.443999] [<ffffffffa0501367>] ib_uverbs_write+0x117/0x380 [ib_uverbs] [ 8551.452269] [<ffffffff815810ab>] ? sock_recvmsg+0x3b/0x50 [ 8551.459071] [<ffffffff81581152>] ? sock_read_iter+0x92/0xe0 [ 8551.466068] [<ffffffff81212857>] __vfs_write+0x37/0x100 [ 8551.472692] [<ffffffff81213532>] ? rw_verify_area+0x52/0xd0 [ 8551.479682] [<ffffffff81213782>] vfs_write+0xa2/0x1a0 [ 8551.486089] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70 [ 8551.493891] [<ffffffff812146c5>] SyS_write+0x55/0xc0 [ 8551.500220] [<ffffffff816ae0ee>] entry_SYSCALL_64_fastpath+0x12/0x71 [ 8551.531284] RIP [<ffffffffa0902a94>] pio_wait.isra.21+0x34/0x190 [hfi1] [ 8551.539508] RSP <ffff880812ac3b58> [ 8551.544110] CR2: 0000000000000000 The priv s_sendcontext pointer was not setup properly. Fix with this patch by using the s_sendcontext and eliminating its send engine use. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-17IB/hfi1: Fix PIO wakeup timing holeMike Marciniszyn
There is a timing hole if there had been greater than PIO_WAIT_BATCH_SIZE waiters. This code will dispatch the first batch but leave the others in the queue. If the restarted waiters don't in turn wait on a buffer, there is a hang. Fix by forcing a return when the QP queue is non-empty. Reviewed-by: Vennila Megavannan <vennila.megavannan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 02:58:25 +0000