summaryrefslogtreecommitdiff
path: root/drivers/staging
AgeCommit message (Collapse)Author
2017-12-15Merge tag 'staging-4.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are some small staging driver fixes for 4.15-rc4. One patch for the ccree driver to prevent an unitialized value from being returned to a caller, and the other fixes a logic error in the pi433 driver" * tag 'staging-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: pi433: Fixes issue with bit shift in rf69_get_modulation staging: ccree: Uninitialized return in ssi_ahash_import()
2017-12-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) CAN fixes from Martin Kelly (cancel URBs properly in all the CAN usb drivers). 2) Revert returning -EEXIST from __dev_alloc_name() as this propagates to userspace and broke some apps. From Johannes Berg. 3) Fix conn memory leaks and crashes in TIPC, from Jon Malloc and Cong Wang. 4) Gianfar MAC can't do EEE so don't advertise it by default, from Claudiu Manoil. 5) Relax strict netlink attribute validation, but emit a warning. From David Ahern. 6) Fix regression in checksum offload of thunderx driver, from Florian Westphal. 7) Fix UAPI bpf issues on s390, from Hendrik Brueckner. 8) New card support in iwlwifi, from Ihab Zhaika. 9) BBR congestion control bug fixes from Neal Cardwell. 10) Fix port stats in nfp driver, from Pieter Jansen van Vuuren. 11) Fix leaks in qualcomm rmnet, from Subash Abhinov Kasiviswanathan. 12) Fix DMA API handling in sh_eth driver, from Thomas Petazzoni. 13) Fix spurious netpoll warnings in bnxt_en, from Calvin Owens. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits) net: mvpp2: fix the RSS table entry offset tcp: evaluate packet losses upon RTT change tcp: fix off-by-one bug in RACK tcp: always evaluate losses in RACK upon undo tcp: correctly test congestion state in RACK bnxt_en: Fix sources of spurious netpoll warnings tcp_bbr: reset long-term bandwidth sampling on loss recovery undo tcp_bbr: reset full pipe detection on loss recovery undo tcp_bbr: record "full bw reached" decision in new full_bw_reached bit sfc: pass valid pointers from efx_enqueue_unwind gianfar: Disable EEE autoneg by default tcp: invalidate rate samples during SACK reneging can: peak/pcie_fd: fix potential bug in restarting tx queue can: usb_8dev: cancel urb on -EPIPE and -EPROTO can: kvaser_usb: cancel urb on -EPIPE and -EPROTO can: esd_usb2: cancel urb on -EPIPE and -EPROTO can: ems_usb: cancel urb on -EPIPE and -EPROTO can: mcba_usb: cancel urb on -EPROTO usbnet: fix alignment for frames with no ethernet header tcp: use current time in tcp_rcv_space_adjust() ...
2017-12-08Merge tag 'media/v4.15-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "A series of fixes for the media subsytem: - The largest amount of fixes in this series is with regards to comments that aren't kernel-doc, but start with "/**". A new check added for 4.15 makes it to produce a *huge* amount of new warnings (I'm compiling here with W=1). Most of the patches in this series fix those. No code changes - just comment changes at the source files - rc: some fixed in order to better handle RC repetition codes - v4l-async: use the v4l2_dev from the root notifier when matching sub-devices - v4l2-fwnode: Check subdev count after checking port - ov 13858 and et8ek8: compilation fix with randconfigs - usbtv: a trivial new USB ID addition - dibusb-common: don't do DMA on stack on firmware load - imx274: Fix error handling, add MAINTAINERS entry - sir_ir: detect presence of port" * tag 'media/v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (50 commits) media: imx274: Fix error handling, add MAINTAINERS entry media: v4l: async: use the v4l2_dev from the root notifier when matching sub-devices media: v4l2-fwnode: Check subdev count after checking port media: et8ek8: select V4L2_FWNODE media: ov13858: Select V4L2_FWNODE media: rc: partial revert of "media: rc: per-protocol repeat period" media: dvb: i2c transfers over usb cannot be done from stack media: dvb-frontends: complete kernel-doc markups media: docs: add documentation for frontend attach info media: dvb_frontends: fix kernel-doc macros media: drivers: remove "/**" from non-kernel-doc comments media: lm3560: add a missing kernel-doc parameter media: rcar_jpu: fix two kernel-doc markups media: vsp1: add a missing kernel-doc parameter media: soc_camera: fix a kernel-doc markup media: mt2063: fix some kernel-doc warnings media: radio-wl1273: fix a parameter name at kernel-doc macro media: s3c-camif: add missing description at s3c_camif_find_format() media: mtk-vpu: add description for wdt fields at struct mtk_vpu media: vdec: fix some kernel-doc warnings ...
2017-12-06staging: pi433: Fixes issue with bit shift in rf69_get_modulationMarcus Wolf
Fixes issue with bit shift in rf69_get_modulation Signed-off-by: Marcus Wolf <linux@wolf-entwicklungen.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-06staging: ccree: Uninitialized return in ssi_ahash_import()Dan Carpenter
The return value isn't initialized on some success paths. Fixes: c5f39d07860c ("staging: ccree: fix leak of import() after init()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05make sock_alloc_file() do sock_release() on failuresAl Viro
This changes calling conventions (and simplifies the hell out the callers). New rules: once struct socket had been passed to sock_alloc_file(), it's been consumed either by struct file or by sock_release() done by sock_alloc_file(). Either way the caller should not do sock_release() after that point. Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05Merge tag 'staging-4.15-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and iio driver fixes from Greg KH: "Here are a number of small staging and iio driver fixes for reported issues for 4.15-rc3. Nothing major here, the majority is IIO issues, like normal, but there are also some small bugfixes for a few staging drivers as well. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: stm32: fix adc/trigger link error iio: health: max30102: Temperature should be in milli Celsius iio: fix kernel-doc build errors iio: adc: meson-saradc: Meson8 and Meson8b do not have REG11 and REG13 iio: adc: meson-saradc: initialize the bandgap correctly on older SoCs iio: adc: meson-saradc: fix the bit_idx of the adc_en clock iio: proximity: sx9500: Assign interrupt from GpioIo() iio: adc: cpcap: fix incorrect validation staging: octeon-usb: use __delay() instead of cvmx_wait() staging: rtl8188eu: Fix incorrect response to SIOCGIWESSID staging: ccree: fix leak of import() after init() staging: comedi: ni_atmio: fix license warning.
2017-11-30media: atomisp: stop producing hundreds of kernel-doc warningsMauro Carvalho Chehab
A recent change on Kernel 4.15-rc1 causes all tags with /** to be handled as kernel-doc markups. Well, several atomisp modules, it doesn't use kernel-doc, but some other documentation markup (doxygen?). So, suppress all those warns by: - replacing /**< by /**. - replacing /** by /*. The core changes were done with: for i in $(find drivers/staging/media/atomisp -type f); do sed 's,/\*\* ,/\*, ' -i $i; done for i in $(find drivers/staging/media/atomisp -type f); do sed 's,/\*\*<,/\**,' -i $i; done for i in drivers/staging/media/atomisp/pci/atomisp2/css2400/runtime/debug/src/ia_css_debug.c drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css_sp.c drivers/staging/media/atomisp/pci/atomisp2/css2400/runtime/rmgr/src/rmgr_vbuf.c; do perl -ne 's,\/\*\*$,/*,g; print $_' $i > a && mv a $i; done; A few manual adjustments were made, where needed. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2017-11-28staging: octeon-usb: use __delay() instead of cvmx_wait()Aaro Koskinen
Commit edf188bee1d9 ("MIPS: Octeon: Remove usage of cvmx_wait() everywhere.") deleted cvmx_wait() but forgot to update OCTEON USB staging driver. Fix that to allow driver build. Fixes: edf188bee1d9 ("MIPS: Octeon: Remove usage of cvmx_wait() everywhere.") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: James Hogan <jhogan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28staging: rtl8188eu: Fix incorrect response to SIOCGIWESSIDLarry Finger
When not associated with an AP, wifi device drivers should respond to the SIOCGIWESSID ioctl with a zero-length string for the SSID, which is the behavior expected by dhcpcd. Currently, this driver returns an error code (-1) from the ioctl call, which causes dhcpcd to assume that the device is not a wireless interface and therefore it fails to work correctly with it thereafter. This problem was reported and tested at https://github.com/lwfinger/rtl8188eu/issues/234. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28staging: ccree: fix leak of import() after init()Gilad Ben-Yossef
crypto_ahash_import() may be called either after crypto_ahash_init() or without such call. Right now we always internally call init() as part of import(), thus leaking memory and mappings if the user has already called init() herself. Fix this by only calling init() internally if the state is not already initialized. Fixes: commit 454527d0d94f ("staging: ccree: fix hash import/export") Cc: stable <stable@vger.kernel.org> Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28staging: comedi: ni_atmio: fix license warning.Matthew Giassa
Resolving license check warning for drivers/staging/comedi. Added the license definitions present in the rest of the module and made sure it's aligned with the license (GPL) in the comments for the affected file (ni_atmio.c). Original warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/staging/comedi//drivers/ni_atmio.o see include/linux/module.h for more information. No longer present after change. Signed-off-by: Matthew Giassa <matthew@giassa.net> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-27Rename superblock flags (MS_xyz -> SB_xyz)Linus Torvalds
This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-21treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE castsKees Cook
With all callbacks converted, and the timer callback prototype switched over, the TIMER_FUNC_TYPE cast is no longer needed, so remove it. Conversion was done with the following scripts: perl -pi -e 's|\(TIMER_FUNC_TYPE\)||g' \ $(git grep TIMER_FUNC_TYPE | cut -d: -f1 | sort -u) perl -pi -e 's|\(TIMER_DATA_TYPE\)||g' \ $(git grep TIMER_DATA_TYPE | cut -d: -f1 | sort -u) The now unused macros are also dropped from include/linux/timer.h. Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21treewide: Switch DEFINE_TIMER callbacks to struct timer_list *Kees Cook
This changes all DEFINE_TIMER() callbacks to use a struct timer_list pointer instead of unsigned long. Since the data argument has already been removed, none of these callbacks are using their argument currently, so this renames the argument to "unused". Done using the following semantic patch: @match_define_timer@ declarer name DEFINE_TIMER; identifier _timer, _callback; @@ DEFINE_TIMER(_timer, _callback); @change_callback depends on match_define_timer@ identifier match_define_timer._callback; type _origtype; identifier _origarg; @@ void -_callback(_origtype _origarg) +_callback(struct timer_list *unused) { ... } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-17Merge branch 'work.get_user_pages_fast' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull get_user_pages_fast() conversion from Al Viro: "A bunch of places switched to get_user_pages_fast()" * 'work.get_user_pages_fast' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ceph: use get_user_pages_fast() pvr2fs: use get_user_pages_fast() atomisp: use get_user_pages_fast() st: use get_user_pages_fast() via_dmablit(): use get_user_pages_fast() fsl_hypervisor: switch to get_user_pages_fast() rapidio: switch to get_user_pages_fast() vchiq_2835_arm: switch to get_user_pages_fast()
2017-11-17Merge branch 'work.iov_iter' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull iov_iter updates from Al Viro: - bio_{map,copy}_user_iov() series; those are cleanups - fixes from the same pile went into mainline (and stable) in late September. - fs/iomap.c iov_iter-related fixes - new primitive - iov_iter_for_each_range(), which applies a function to kernel-mapped segments of an iov_iter. Usable for kvec and bvec ones, the latter does kmap()/kunmap() around the callback. _Not_ usable for iovec- or pipe-backed iov_iter; the latter is not hard to fix if the need ever appears, the former is by design. Another related primitive will have to wait for the next cycle - it passes page + offset + size instead of pointer + size, and that one will be usable for everything _except_ kvec. Unfortunately, that one didn't get exposure in -next yet, so... - a bit more lustre iov_iter work, including a use case for iov_iter_for_each_range() (checksum calculation) - vhost/scsi leak fix in failure exit - misc cleanups and detritectomy... * 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (21 commits) iomap_dio_actor(): fix iov_iter bugs switch ksocknal_lib_recv_...() to use of iov_iter_for_each_range() lustre: switch struct ksock_conn to iov_iter vhost/scsi: switch to iov_iter_get_pages() fix a page leak in vhost_scsi_iov_to_sgl() error recovery new primitive: iov_iter_for_each_range() lnet_return_rx_credits_locked: don't abuse list_entry xen: don't open-code iov_iter_kvec() orangefs: remove detritus from struct orangefs_kiocb_s kill iov_shorten() bio_alloc_map_data(): do bmd->iter setup right there bio_copy_user_iov(): saner bio size calculation bio_map_user_iov(): get rid of copying iov_iter bio_copy_from_iter(): get rid of copying iov_iter move more stuff down into bio_copy_user_iov() blk_rq_map_user_iov(): move iov_iter_advance() down bio_map_user_iov(): get rid of the iov_for_each() bio_map_user_iov(): move alignment check into the main loop don't rely upon subsequent bio_add_pc_page() calls failing ... and with iov_iter_get_pages_alloc() it becomes even simpler ...
2017-11-17Merge branch 'misc.compat' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull compat and uaccess updates from Al Viro: - {get,put}_compat_sigset() series - assorted compat ioctl stuff - more set_fs() elimination - a few more timespec64 conversions - several removals of pointless access_ok() in places where it was followed only by non-__ variants of primitives * 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (24 commits) coredump: call do_unlinkat directly instead of sys_unlink fs: expose do_unlinkat for built-in callers ext4: take handling of EXT4_IOC_GROUP_ADD into a helper, get rid of set_fs() ipmi: get rid of pointless access_ok() pi433: sanitize ioctl cxlflash: get rid of pointless access_ok() mtdchar: get rid of pointless access_ok() r128: switch compat ioctls to drm_ioctl_kernel() selection: get rid of field-by-field copyin VT_RESIZEX: get rid of field-by-field copyin i2c compat ioctls: move to ->compat_ioctl() sched_rr_get_interval(): move compat to native, get rid of set_fs() mips: switch to {get,put}_compat_sigset() sparc: switch to {get,put}_compat_sigset() s390: switch to {get,put}_compat_sigset() ppc: switch to {get,put}_compat_sigset() parisc: switch to {get,put}_compat_sigset() get_compat_sigset() get rid of {get,put}_compat_itimerspec() io_getevents: Use timespec64 to represent timeouts ...
2017-11-15Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.15. Core: - Atomic object lifetime fixes - Atomic iterator improvements - Sparse/smatch fixes - Legacy kms ioctls to be interruptible - EDID override improvements - fb/gem helper cleanups - Simple outreachy patches - Documentation improvements - Fix dma-buf rcu races - DRM mode object leasing for improving VR use cases. - vgaarb improvements for non-x86 platforms. New driver: - tve200: Faraday Technology TVE200 block. This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in the StorLink SL3516 (later Cortina Systems CS3516) as well as the Grain Media GM8180. New bridges: - SiI9234 support New panels: - S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba LT089AC19000, Innolux AT043TN24 i915: - Remove Coffeelake from alpha support - Cannonlake workarounds - Infoframe refactoring for DisplayPort - VBT updates - DisplayPort vswing/emph/buffer translation refactoring - CCS fixes - Restore GPU clock boost on missed vblanks - Scatter list updates for userptr allocations - Gen9+ transition watermarks - Display IPC (Isochronous Priority Control) - Private PAT management - GVT: improved error handling and pci config sanitizing - Execlist refactoring - Transparent Huge Page support - User defined priorities support - HuC/GuC firmware refactoring - DP MST fixes - eDP power sequencing fixes - Use RCU instead of stop_machine - PSR state tracking support - Eviction fixes - BDW DP aux channel timeout fixes - LSPCON fixes - Cannonlake PLL fixes amdgpu: - Per VM BO support - Powerplay cleanups - CI powerplay support - PASID mgr for kfd - SR-IOV fixes - initial GPU reset for vega10 - Prime mmap support - TTM updates - Clock query interface for Raven - Fence to handle ioctl - UVD encode ring support on Polaris - Transparent huge page DMA support - Compute LRU pipe tweaks - BO flag to allow buffers to opt out of implicit sync - CTX priority setting API - VRAM lost infrastructure plumbing qxl: - fix flicker since atomic rework amdkfd: - Further improvements from internal AMD tree - Usermode events - Drop radeon support nouveau: - Pascal temperature sensor support - Improved BAR2 handling - MMU rework to support Pascal MMU exynos: - Improved HDMI/mixer support - HDMI audio interface support tegra: - Prep work for tegra186 - Cleanup/fixes msm: - Preemption support for a5xx - Display fixes for 8x96 (snapdragon 820) - Async cursor plane fixes - FW loading rework - GPU debugging improvements vc4: - Prep for DSI panels - fix T-format tiling scanout - New madvise ioctl Rockchip: - LVDS support omapdrm: - omap4 HDMI CEC support etnaviv: - GPU performance counters groundwork sun4i: - refactor driver load + TCON backend - HDMI improvements - A31 support - Misc fixes udl: - Probe/EDID read fixes. tilcdc: - Misc fixes. pl111: - Support more variants adv7511: - Improve EDID handling. - HDMI CEC support sii8620: - Add remote control support" * tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits) drm/rockchip: analogix_dp: Use mutex rather than spinlock drm/mode_object: fix documentation for object lookups. drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU drm/i915: Move init_clock_gating() back to where it was drm/i915: Prune the reservation shared fence array drm/i915: Idle the GPU before shinking everything drm/i915: Lock llist_del_first() vs llist_del_all() drm/i915: Calculate ironlake intermediate watermarks correctly, v2. drm/i915: Disable lazy PPGTT page table optimization for vGPU drm/i915/execlists: Remove the priority "optimisation" drm/i915: Filter out spurious execlists context-switch interrupts drm/amdgpu: use irq-safe lock for kiq->ring_lock drm/amdgpu: bypass lru touch for KIQ ring submission drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories() drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs() drm/amd/powerplay: initialize a variable before using it drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug drm/rockchip: add CONFIG_OF dependency for lvds ...
2017-11-15Merge tag 'media/v4.15-1' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Documentation for digital TV (both kAPI and uAPI) are now in sync with the implementation (except for legacy/deprecated ioctls). This is a major step, as there were always a gap there - New sensor driver: imx274 - New cec driver: cec-gpio - New platform driver for rockship rga and tegra CEC - New RC driver: tango-ir - Several cleanups at atomisp driver - Core improvements for RC, CEC, V4L2 async probing support and DVB - Lots of drivers cleanup, fixes and improvements. * tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (332 commits) dvb_frontend: don't use-after-free the frontend struct media: dib0700: fix invalid dvb_detach argument media: v4l2-ctrls: Don't validate BITMASK twice media: s5p-mfc: fix lockdep warning media: dvb-core: always call invoke_release() in fe_free() media: usb: dvb-usb-v2: dvb_usb_core: remove redundant code in dvb_usb_fe_sleep media: au0828: make const array addr_list static media: cx88: make const arrays default_addr_list and pvr2000_addr_list static media: drxd: make const array fastIncrDecLUT static media: usb: fix spelling mistake: "synchronuously" -> "synchronously" media: ddbridge: fix build warnings media: av7110: avoid 2038 overflow in debug print media: Don't do DMA on stack for firmware upload in the AS102 driver media: v4l: async: fix unregister for implicitly registered sub-device notifiers media: v4l: async: fix return of unitialized variable ret media: imx274: fix missing return assignment from call to imx274_mode_regs media: camss-vfe: always initialize reg at vfe_set_xbar_cfg() media: atomisp: make function calls cleaner media: atomisp: get rid of storage_class.h media: atomisp: get rid of wrong stddef.h include ...
2017-11-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge updates from Andrew Morton: - a few misc bits - ocfs2 updates - almost all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (131 commits) memory hotplug: fix comments when adding section mm: make alloc_node_mem_map a void call if we don't have CONFIG_FLAT_NODE_MEM_MAP mm: simplify nodemask printing mm,oom_reaper: remove pointless kthread_run() error check mm/page_ext.c: check if page_ext is not prepared writeback: remove unused function parameter mm: do not rely on preempt_count in print_vma_addr mm, sparse: do not swamp log with huge vmemmap allocation failures mm/hmm: remove redundant variable align_end mm/list_lru.c: mark expected switch fall-through mm/shmem.c: mark expected switch fall-through mm/page_alloc.c: broken deferred calculation mm: don't warn about allocations which stall for too long fs: fuse: account fuse_inode slab memory as reclaimable mm, page_alloc: fix potential false positive in __zone_watermark_ok mm: mlock: remove lru_add_drain_all() mm, sysctl: make NUMA stats configurable shmem: convert shmem_init_inodecache() to void Unify migrate_pages and move_pages access checks mm, pagevec: rename pagevec drained field ...
2017-11-15mm: remove __GFP_COLDMel Gorman
As the page free path makes no distinction between cache hot and cold pages, there is no real useful ordering of pages in the free list that allocation requests can take advantage of. Juding from the users of __GFP_COLD, it is likely that a number of them are the result of copying other sites instead of actually measuring the impact. Remove the __GFP_COLD parameter which simplifies a number of paths in the page allocator. This is potentially controversial but bear in mind that the size of the per-cpu pagelists versus modern cache sizes means that the whole per-cpu list can often fit in the L3 cache. Hence, there is only a potential benefit for microbenchmarks that alloc/free pages in a tight loop. It's even worse when THP is taken into account which has little or no chance of getting a cache-hot page as the per-cpu list is bypassed and the zeroing of multiple pages will thrash the cache anyway. The truncate microbenchmarks are not shown as this patch affects the allocation path and not the free path. A page fault microbenchmark was tested but it showed no sigificant difference which is not surprising given that the __GFP_COLD branches are a miniscule percentage of the fault path. Link: http://lkml.kernel.org/r/20171018075952.10627-9-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: "This is a fairly plain pull request. Lots of driver updates across the stack, a huge number of static analysis cleanups including a close to 50 patch series from Bart Van Assche, and a number of new features inside the stack such as general CQ moderation support. Nothing really stands out, but there might be a few conflicts as you take things in. In particular, the cleanups touched some of the same lines as the new timer_setup changes. Everything in this pull request has been through 0day and at least two days of linux-next (since Stephen doesn't necessarily flag new errors/warnings until day2). A few more items (about 30 patches) from Intel and Mellanox showed up on the list on Tuesday. I've excluded those from this pull request, and I'm sure some of them qualify as fixes suitable to send any time, but I still have to review them fully. If they contain mostly fixes and little or no new development, then I will probably send them through by the end of the week just to get them out of the way. There was a break in my acceptance of patches which coincides with the computer problems I had, and then when I got things mostly back under control I had a backlog of patches to process, which I did mostly last Friday and Monday. So there is a larger number of patches processed in that timeframe than I was striving for. Summary: - Add iWARP support to qedr driver - Lots of misc fixes across subsystem - Multiple update series to hns roce driver - Multiple update series to hfi1 driver - Updates to vnic driver - Add kref to wait struct in cxgb4 driver - Updates to i40iw driver - Mellanox shared pull request - timer_setup changes - massive cleanup series from Bart Van Assche - Two series of SRP/SRPT changes from Bart Van Assche - Core updates from Mellanox - i40iw updates - IPoIB updates - mlx5 updates - mlx4 updates - hns updates - bnxt_re fixes - PCI write padding support - Sparse/Smatch/warning cleanups/fixes - CQ moderation support - SRQ support in vmw_pvrdma" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (296 commits) RDMA/core: Rename kernel modify_cq to better describe its usage IB/mlx5: Add CQ moderation capability to query_device IB/mlx4: Add CQ moderation capability to query_device IB/uverbs: Add CQ moderation capability to query_device IB/mlx5: Exposing modify CQ callback to uverbs layer IB/mlx4: Exposing modify CQ callback to uverbs layer IB/uverbs: Allow CQ moderation with modify CQ iw_cxgb4: atomically flush the qp iw_cxgb4: only call the cq comp_handler when the cq is armed iw_cxgb4: Fix possible circular dependency locking warning RDMA/bnxt_re: report vlan_id and sl in qp1 recv completion IB/core: Only maintain real QPs in the security lists IB/ocrdma_hw: remove unnecessary code in ocrdma_mbx_dealloc_lkey RDMA/core: Make function rdma_copy_addr return void RDMA/vmw_pvrdma: Add shared receive queue support RDMA/core: avoid uninitialized variable warning in create_udata RDMA/bnxt_re: synchronize poll_cq and req_notify_cq verbs RDMA/bnxt_re: Flush CQ notification Work Queue before destroying QP RDMA/bnxt_re: Set QP state in case of response completion errors RDMA/bnxt_re: Add memory barriers when processing CQ/EQ entries ...
2017-11-14Merge tag 'staging-4.15-rc1' into v4l_for_linusMauro Carvalho Chehab
There are some conflicts between staging and media trees, as reported by Stephen Rothwell <sfr@canb.auug.org.au>. So, merge from staging. * tag 'staging-4.15-rc1': (775 commits) staging: lustre: add SPDX identifiers to all lustre files staging: greybus: Remove redundant license text staging: greybus: add SPDX identifiers to all greybus driver files staging: ccree: simplify ioread/iowrite staging: ccree: simplify registers access staging: ccree: simplify error handling logic staging: ccree: remove dead code staging: ccree: handle limiting of DMA masks staging: ccree: copy IV to DMAable memory staging: fbtft: remove redundant initialization of buf staging: sm750fb: Fix parameter mistake in poke32 staging: wilc1000: Fix bssid buffer offset in Txq staging: fbtft: fb_ssd1331: fix mirrored display staging: android: Fix checkpatch.pl error staging: greybus: loopback: convert loopback to use generic async operations staging: greybus: operation: add private data with get/set accessors staging: greybus: loopback: Fix iteration count on async path staging: greybus: loopback: Hold per-connection mutex across operations staging: greybus/loopback: use ktime_get() for time intervals staging: fsl-dpaa2/eth: Extra headroom in RX buffers ... Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-13Merge tag 'usb-4.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver updates for 4.15-rc1. There is the usual amount of gadget and xhci driver updates, along with phy and chipidea enhancements. There's also a lot of SPDX tags and license boilerplate cleanups as well, which provide some churn in the diffstat. Other major thing is the typec code that moved out of staging and into the "real" part of the drivers/usb/ tree, which was nice to see happen. All of these have been in linux-next with no reported issues for a while" * tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) usb: gadget: f_fs: Fix use-after-free in ffs_free_inst USB: usbfs: compute urb->actual_length for isochronous usb: core: message: remember to reset 'ret' to 0 when necessary USB: typec: Remove remaining redundant license text USB: typec: add SPDX identifiers to some files USB: renesas_usbhs: rcar?.h: add SPDX tags USB: chipidea: ci_hdrc_tegra.c: add SPDX line USB: host: xhci-debugfs: add SPDX lines USB: add SPDX identifiers to all remaining Makefiles usb: host: isp1362-hcd: remove a couple of redundant assignments USB: adutux: remove redundant variable minor usb: core: add a new usb_get_ptm_status() helper usb: core: add a 'type' parameter to usb_get_status() usb: core: introduce a new usb_get_std_status() helper usb: core: rename usb_get_status() 'type' argument to 'recip' usb: core: add Status Type definitions USB: gadget: Remove redundant license text USB: gadget: function: Remove redundant license text USB: gadget: udc: Remove redundant license text USB: gadget: legacy: Remove redundant license text ...
2017-11-13Merge tag 'staging-4.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO updates from Greg KH: "Here is the "big" staging and IIO driver update for 4.15-rc1. Lots and lots of little changes, almost all minor code cleanups as the Outreachy application process happened during this development cycle. Also happened was a lot of IIO driver activity, and the typec USB code moving out of staging to drivers/usb (same commits are in the USB tree on a persistent branch to not cause merge issues.) Overall, it's a wash, I think we added a few hundred more lines than removed, but really only a few thousand were modified at all. All of these have been in linux-next for a while. There might be a merge issue with Al's vfs tree in the pi433 driver (take his changes, they are always better), and the media tree with some of the odd atomisp cleanups (take the media tree's version)" * tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits) staging: lustre: add SPDX identifiers to all lustre files staging: greybus: Remove redundant license text staging: greybus: add SPDX identifiers to all greybus driver files staging: ccree: simplify ioread/iowrite staging: ccree: simplify registers access staging: ccree: simplify error handling logic staging: ccree: remove dead code staging: ccree: handle limiting of DMA masks staging: ccree: copy IV to DMAable memory staging: fbtft: remove redundant initialization of buf staging: sm750fb: Fix parameter mistake in poke32 staging: wilc1000: Fix bssid buffer offset in Txq staging: fbtft: fb_ssd1331: fix mirrored display staging: android: Fix checkpatch.pl error staging: greybus: loopback: convert loopback to use generic async operations staging: greybus: operation: add private data with get/set accessors staging: greybus: loopback: Fix iteration count on async path staging: greybus: loopback: Hold per-connection mutex across operations staging: greybus/loopback: use ktime_get() for time intervals staging: fsl-dpaa2/eth: Extra headroom in RX buffers ...
2017-11-13Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-11-11staging: lustre: add SPDX identifiers to all lustre filesGreg Kroah-Hartman
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/staging/lustre files files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: James Simmons <jsimmons@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-11staging: greybus: Remove redundant license textGreg Kroah-Hartman
Now that the SPDX tag is in all greybus files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org> Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com> Acked-by: David Lin <dtwlin@gmail.com> Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Mark Greer <mgreer@animalcreek.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Acked-by: "Bryan O'Donoghue" <pure.logic@nexus-software.ie> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-11staging: greybus: add SPDX identifiers to all greybus driver filesGreg Kroah-Hartman
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/staging/greybus files files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com> Cc: "Bryan O'Donoghue" <pure.logic@nexus-software.ie> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com> Acked-by: David Lin <dtwlin@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org> Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Mark Greer <mgreer@animalcreek.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-10pi433: sanitize ioctlAl Viro
a) those access_ok() are pointless b) guarding against the ioctl number declaration changes in that way is pointless, especially since we _know_ the size of object we want to copy. [folded braino fixes from Colin Ian King and Dan Carpenter] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-07usb: core: introduce a new usb_get_std_status() helperFelipe Balbi
This new helper is a simple wrapper around usb_get_status(). This patch is in preparation to adding support for fetching PTM_STATUS types. No functional changes. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-06staging: ccree: simplify ioread/iowriteGilad Ben-Yossef
Registers ioread/iowrite operations were done via macros, sometime using a "magical" implicit parameter. Replace all register access with simple inline macros. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-06staging: ccree: simplify registers accessGilad Ben-Yossef
The register offset calculation macro was taking a HW block base parameter that was not actually used. Simplify the whole thing by dropping it and rename the macro for better readability. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-06staging: ccree: simplify error handling logicGilad Ben-Yossef
Turn the code sites that don't require any special handling on error return to a simple return. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-06staging: ccree: remove dead codeGilad Ben-Yossef
The inflight_counter field is updated in a single location and never used. Remove it. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-06staging: ccree: handle limiting of DMA masksGilad Ben-Yossef
Properly handle limiting of DMA masks based on device and bus capabilities. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-06staging: ccree: copy IV to DMAable memoryGilad Ben-Yossef
We are being passed an IV buffer from unknown origin, which may be stack allocated and thus not safe for DMA. Allocate a DMA safe buffer for the IV and use that instead. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-06staging: fbtft: remove redundant initialization of bufColin Ian King
The pointer buf is being set on each iteration of a for-loop and so the initialization of buf at declaration time is redundant and can be removed. Cleans up clang warning: drivers/staging/fbtft/fb_uc1701.c:130:6: warning: Value stored to 'buf' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-06staging: sm750fb: Fix parameter mistake in poke32Huacai Chen
In commit c075b6f2d357ea9 ("staging: sm750fb: Replace POKE32 and PEEK32 by inline functions"), POKE32 has been replaced by the inline function poke32. But it exchange the "addr" and "data" parameters by mistake, so fix it. Fixes: c075b6f2d357ea9 ("staging: sm750fb: Replace POKE32 and PEEK32 by inline functions"), Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Liangliang Huang <huangll@lemote.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-06staging: wilc1000: Fix bssid buffer offset in TxqAditya Shankar
Commit 46949b48568b ("staging: wilc1000: New cfg packet format in handle_set_wfi_drv_handler") updated the frame format sent from host to the firmware. The code to update the bssid offset in the new frame was part of a second patch in the series which did not make it in and thus causes connection problems after associating to an AP. This fix adds the proper offset of the bssid value in the Tx queue buffer to fix the connection issues. Fixes: 46949b48568b ("staging: wilc1000: New cfg packet format in handle_set_wfi_drv_handler") Cc: stable@vger.kernel.org Signed-off-by: Aditya Shankar <Aditya.Shankar@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-06staging: fbtft: fb_ssd1331: fix mirrored displayJohannes H. Jensen
When the row scan order is reversed (the default) we also need to reverse the column scan order. This was not done previously, resulting in a mirrored display. Also add support for 180 degree display rotation, in which case simply disable reversed row and column scan order. Tested on an Adafruit 0.96" mini Color OLED display. Signed-off-by: Johannes H. Jensen <joh@pseudoberries.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-06staging: android: Fix checkpatch.pl errorSidong Yang
Remove space prohibited before the close parenthesis ')'. Signed-off-by: Sidong Yang <realwakka@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-06staging: greybus: loopback: convert loopback to use generic async operationsBryan O'Donoghue
Loopback has its own internal method for tracking and timing out asynchronous operations however previous patches make it possible to use functionality provided by operation.c to do this instead. Using the code in operation.c means we can completely subtract the timer, the work-queue, the kref and the cringe-worthy 'pending' flag. The completion callback triggered by operation.c will provide an authoritative result code - including -ETIMEDOUT for asynchronous operations. Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Reviewed-by: Johan Hovold <johan@kernel.org> Cc: Alex Elder <elder@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Mitch Tasman <tasman@leaflabs.com> Cc: greybus-dev@lists.linaro.org Cc: devel@driverdev.osuosl.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-06staging: greybus: operation: add private data with get/set accessorsBryan O'Donoghue
Asynchronous operation completion handler's lives are made easier if there is a generic pointer that can store private data associated with the operation. This patch adds a pointer field to struct gb_operation and get/set methods to access that pointer. Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Johan Hovold <johan@kernel.org> Cc: Alex Elder <elder@kernel.org> Cc: Mitch Tasman <tasman@leaflabs.com> Cc: greybus-dev@lists.linaro.org Cc: devel@driverdev.osuosl.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-06staging: greybus: loopback: Fix iteration count on async pathBryan O'Donoghue
Commit 12927835d211 ("greybus: loopback: Add asynchronous bi-directional support") does what it says on the tin - namely, adds support for asynchronous bi-directional loopback operations. What it neglects to do though is increment the per-connection gb->iteration_count on an asynchronous operation error. This patch fixes that omission. Fixes: 12927835d211 ("greybus: loopback: Add asynchronous bi-directional support") Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Reported-by: Mitch Tasman <tasman@leaflabs.com> Reviewed-by: Johan Hovold <johan@kernel.org> Cc: Alex Elder <elder@kernel.org> Cc: Mitch Tasman <tasman@leaflabs.com> Cc: greybus-dev@lists.linaro.org Cc: devel@driverdev.osuosl.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-06staging: greybus: loopback: Hold per-connection mutex across operationsBryan O'Donoghue
Commit d9fb3754ecf8 ("greybus: loopback: Relax locking during loopback operations") changes the holding of the per-connection mutex to be less restrictive because at the time of that commit per-connection mutexes were encapsulated by a per-driver level gb_dev.mutex. Commit 8e1d6c336d74 ("greybus: loopback: drop bus aggregate calculation") on the other hand subtracts the driver level gb_dev.mutex but neglects to move the mutex back to the place it was prior to commit d9fb3754ecf8 ("greybus: loopback: Relax locking during loopback operations"), as a result several members of the per connection struct gb_loopback are racy. The solution is restoring the old location of mutex_unlock(&gb->mutex) as it was in commit d9fb3754ecf8 ("greybus: loopback: Relax locking during loopback operations"). Fixes: 8e1d6c336d74 ("greybus: loopback: drop bus aggregate calculation") Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Reviewed-by: Johan Hovold <johan@kernel.org> Cc: Alex Elder <elder@kernel.org> Cc: Mitch Tasman <tasman@leaflabs.com> Cc: greybus-dev@lists.linaro.org Cc: devel@driverdev.osuosl.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-06staging: greybus/loopback: use ktime_get() for time intervalsArnd Bergmann
This driver is the only one using the deprecated timeval_to_ns() helper. Changing it from do_gettimeofday() to ktime_get() makes the code more efficient, more robust against concurrent settimeofday(), more accurate and lets us get rid of that helper in the future. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-03staging: fsl-dpaa2/eth: Extra headroom in RX buffersBogdan Purcareata
The needed headroom that we ask the stack to reserve for us in TX skbs is larger than the headroom available in RX frames, which leads to skb reallocations in forwarding scenarios involving two DPNI interfaces. Configure the hardware to reserve some extra space in the RX frame headroom to avoid this situation. The value is chosen based on the Tx frame data offset, the Rx buffer alignment value and the netdevice required headroom. The network stack will take care to reserve space for HH_DATA_MOD when building the skb, so there's no need to account for it in the netdevice needed headroom. Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com> Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>