| Age | Commit message (Collapse) | Author |
|---|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- several fixes for new drivers added for Kernel 4.8 addition (cec
core, pulse8 cec driver and Mediatek vcodec)
- a regression fix for cx23885 and saa7134 drivers
- an important fix for rcar-fcp, making rcar_fcp_enable() return 0 on
success
* tag 'media/v4.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (25 commits)
[media] cx23885/saa7134: assign q->dev to the PCI device
[media] rcar-fcp: Make sure rcar_fcp_enable() returns 0 on success
[media] cec: fix ioctl return code when not registered
[media] cec: don't Feature Abort broadcast msgs when unregistered
[media] vcodec:mediatek: Refine VP8 encoder driver
[media] vcodec:mediatek: Refine H264 encoder driver
[media] vcodec:mediatek: change H264 profile default to profile high
[media] vcodec:mediatek: Add timestamp and timecode copy for V4L2 Encoder
[media] vcodec:mediatek: Fix visible_height larger than coded_height issue in s_fmt_out
[media] vcodec:mediatek: Fix fops_vcodec_release flow for V4L2 Encoder
[media] vcodec:mediatek:code refine for v4l2 Encoder driver
[media] cec-funcs.h: add missing vendor-specific messages
[media] cec-edid: check for IEEE identifier
[media] pulse8-cec: fix error handling
[media] pulse8-cec: set correct Signal Free Time
[media] mtk-vcodec: add HAS_DMA dependency
[media] cec: ignore messages when log_addr_mask == 0
[media] cec: add item to TODO
[media] cec: set unclaimed addresses to CEC_LOG_ADDR_INVALID
[media] cec: add CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK flag
...
|
|
Conflicts:
drivers/net/ethernet/mediatek/mtk_eth_soc.c
drivers/net/ethernet/qlogic/qed/qed_dcbx.c
drivers/net/phy/Kconfig
All conflicts were cases of overlapping commits.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Don't return the confusing -EIO error code when the device is not registered,
instead return -ENODEV which is the proper thing to do in this situation.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
If the adapter is configured as 'Unregistered', then cec_receive_notify
incorrectly thinks that broadcast messages are directed messages. The
destination for broadcast messages is 0xf, and the logical address
assigned to Unregistered devices is also 0xf and the logic didn't handle
that correctly.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into work-linus
Jonathan writes:
First round of IIO fixes for the 4.8 cycle.
This is somewhat of a bumper set due to my unavailabilty earlier in the
month. The only slightly unusual ones are the dts updates for the
rockchip adc reset. The fix in the driver only makes sense with these
and the rockchip maintainer is happy with them going through IIO to
reach mainline.
Core stuff
* Fix an issue with a blocking op when !TASK_RUNNING. This been there
a while and snuck in with seemingly minor additions to some core
code paths.
* Tools
- generic_buffer failed to initialize the channel array pointer thus
in the case of no channels blows up trying to free a random memory
address.
* sw-trigger:
- Fix config group initialization when configfs is built as a module.
Drivers
* ad5933
- Fix an incorrect overwrite of an error value.
* ad799x
- A missed assignment of the update_scan_mode callback means buffered mode
doesn't work on the ad7991, ad7995 or ad7999.
* ads1015
- wrong pointer returned from i2c_get_clientdata (missmatch of assumptions)
* am2315
- Timestamps are reported, but never actually acquired from anywhere
(so always 0)
- missing buffer selects in Kconfig
* am335x adc
- Protect fifo1 from concurrent access.
- Increase timeout waiting for ADC to be long enough in all cases.
* as3935
- Timestamps are reported, but never actually acquired from anywhere
(so always 0)
* at91
- Fix reading of channel 3.
* atlas-ph-sensor
- Typo means that the scale of electrical conductivity readings is way off.
* bma220
- Timestamps are reported, but never actually acquired from anywhere
(so always 0)
- Missing buffer selects in Kconfig
* bmp280
- pass the write pointer to PTR_ERR (i.e. the one that was just checked
with IS_ERR).
- suspend /resume crash due to wrong assumption about what dev_get_drvdata
would return.
* hdc100x
- It superficially appeared that smbus_read_byte commands would allow
reading of the outputs in two goes. In reality it doesn't work, but
instead returns the same for the upper and lower bytes (nice catch from
Alison!)
* kxsd9
- Fix raw read return value to ensure it actually reports the value rather
than a blank string.
* max44000
- Missing buffer selects in Kconfig
* rockchip_saradc
- Add use of reset controller to enforce a clean state of the ADC.
Some bootloaders can leave it in an 'intersting' state and effectively
frozen without this. A couple of associated dts updates.
* stk8ba50
- Missing buffer selects in Kconfig
* stx104
- Fix a possible race due to use of devm_iio_device_register when there
was other stuff in the remove function.
|
|
Support more error codes and fix a bug where MSGCODE_TRANSMIT_FAILED_LINE
was mapped to CEC_TX_STATUS_ARB_LOST, which is wrong.
Thanks to Pulse-Eight for providing me with the information needed
to handle this correctly (I hope).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Don't hardcode the signal free time to 3 bit periods, instead use
the value for the signal free time as passed in by the CEC framework.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Most CEC adapters will still receive broadcast messages, even if no logical
addresses are claimed. But those messages should only be passed on for
monitoring purposes, but not for processing by either kernel or userspace
if userspace didn't call CEC_ADAP_S_LOG_ADDRS first.
So if adap->log_addrs.log_addr_mask is 0, then just return before passing
the received message on to the processing code.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Up to 4 logical addresses can be claimed. Make sure that any
unclaimed logical addresses are set to CEC_LOG_ADDR_INVALID as
per the documentation.
Take special care in the unregistered case: when falling back to
unregistered num_log_addrs may be > 1, so mark those as invalid.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Currently if none of the requested logical addresses can be claimed, the
framework will fall back to the Unregistered logical address.
Add a flag to enable this explicitly. By default it will just go back to
the unconfigured state.
Usually Unregistered is not something you want since the functionality is
very limited. Unless the application has support for this, it will fail
to work correctly. So require that the application explicitly requests
this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
- The global lock was used in cec_get_device when it should have
used the devnode lock.
- cec_put_device also took the global lock, but since the release
function takes that lock as well this could lead to a deadlock.
Just don't take the lock here since there is no reason for it.
- cec_devnode_register() should take the global lock when clearing
the bit in the global bitmap.
- In cec_devnode_unregister() place the devnode->(un)register tests
and assignments under the devnode lock as well: this has to be
in a critical block.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
This lock will be used to protect more than just the fhs list.
So rename it to just 'lock'.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The current check for associatedsta being set to -1 to indicate it has
not been found is not working because associatedsta is initialized to
zero and will never be -1. Fix this by initializing it to ~0 and checking
for ~0 instead.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We can't pass NULL pointers to destroy_workqueue().
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix incorrect usage of completion interface by replacing
'wait_for_completion' with 'complete'. This error was introduced
accidentally while replacing semaphores with mutexes.
Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit ebb657babfa9 ("staging: comedi: ni_mio_common: clarify the
cmd->start_arg validation and use") introduced a backwards compatibility
issue in the use of asynchronous commands on the AO subdevice when
`start_src` is `TRIG_EXT`. Valid values for `start_src` are `TRIG_INT`
(for internal, software trigger), and `TRIG_EXT` (for external trigger).
When set to `TRIG_EXT`. In both cases, the driver relies on an
internal, software trigger to set things up (allowing the user
application to write sufficient samples to the data buffer before the
trigger), so it acts as a software "pre-trigger" in the `TRIG_EXT` case.
The software trigger is handled by `ni_ao_inttrig()`.
Prior to the above change, when `start_src` was `TRIG_INT`, `start_arg`
was required to be 0, and `ni_ao_inttrig()` checked that the software
trigger number was also 0. After the above change, when `start_src` was
`TRIG_INT`, any value was allowed for `start_arg`, and `ni_ao_inttrig()`
checked that the software trigger number matched this `start_arg` value.
The backwards compatibility issue is that the internal trigger number
now has to match `start_arg` when `start_src` is `TRIG_EXT` when it
previously had to be 0.
Fix the backwards compatibility issue in `ni_ao_inttrig()` by always
allowing software trigger number 0 when `start_src` is something other
than `TRIG_INT`.
Thanks to Spencer Olson for reporting the issue.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reported-by: Spencer Olson <olsonse@umich.edu>
Fixes: ebb657babfa9 ("staging: comedi: ni_mio_common: clarify the cmd->start_arg validation and use")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Bitwise | has higher precedence than ?: so we need to add some
parenthesis for this to work as intended.
Fixes: 7c9574090d30 ('staging: comedi: dt2811: simplify A/D reference configuration')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The CMDF_ROUND_DOWN case falls through and so always returns -EINVAL.
Fixes: 14b93bb6bbf0 ("staging: comedi: adv_pci_dio: separate out PCI-1760 support")
Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For counter subdevices, the `s->insn_write` handler is being set to the
wrong function, `ni_tio_insn_read()`. It should be
`ni_tio_insn_write()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reported-by: Éric Piel <piel@delmic.com>
Fixes: 10f74377eec3 ("staging: comedi: ni_tio: make ni_tio_winsn() a
proper comedi (*insn_write)"
Cc: <stable@vger.kernel.org> # 3.17+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 73e0e4dfed4c ("staging: comedi: comedi_test: fix timer lock-up")
fixed a lock-up in the timer routine `waveform_ai_timer()` (which was
called `waveform_ai_interrupt()` at the time) caused by
commit 240512474424 ("staging: comedi: comedi_test: use
comedi_handle_events()"). However, it introduced a race condition that
can result in the timer routine misbehaving, such as accessing freed
memory or dereferencing a NULL pointer.
73e0... changed the timer routine to do nothing unless a
`WAVEFORM_AI_RUNNING` flag was set, and changed `waveform_ai_cancel()`
to clear the flag and replace a call to `del_timer_sync()` with a call
to `del_timer()`. `waveform_ai_cancel()` may be called from the timer
routine itself (via `comedi_handle_events()`), or from `do_cancel()`.
(`do_cancel()` is called as a result of a file operation (usually a
`COMEDI_CANCEL` ioctl command, or a release), or during device removal.)
When called from `do_cancel()`, the call to `waveform_ai_cancel()` is
followed by a call to `do_become_nonbusy()`, which frees up stuff for
the current asynchronous command under the assumption that it is now
safe to do so. The race condition occurs when the timer routine
`waveform_ai_timer()` checks the `WAVEFORM_AI_RUNNING` flag just before
it is cleared by `waveform_ai_cancel()`, and is still running during the
call to `do_become_nonbusy()`. In particular, it can lead to a NULL
pointer dereference:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffffc0c63add>] waveform_ai_timer+0x17d/0x290 [comedi_test]
That corresponds to this line in `waveform_ai_timer()`:
unsigned int chanspec = cmd->chanlist[async->cur_chan];
but `do_become_nonbusy()` frees `cmd->chanlist` and sets it to `NULL`.
Fix the race by calling `del_timer_sync()` instead of `del_timer()` in
`waveform_ai_cancel()` when not in an interrupt context. The only time
`waveform_ai_cancel()` is called in an interrupt context is when it is
called from the timer routine itself, via `comedi_handle_events()`.
There is no longer any need for the `WAVEFORM_AI_RUNNING` flag, so get
rid of it.
The bug was copied from the AI subdevice to the AO when support for
commands on the AO subdevice was added by commit 0cf55bbef2f9 ("staging:
comedi: comedi_test: implement commands on AO subdevice"). That
involves the timer routine `waveform_ao_timer()`, the comedi "cancel"
routine `waveform_ao_cancel()`, and the flag `WAVEFORM_AO_RUNNING`. Fix
it in the same way as for the AI subdevice.
Fixes: 73e0e4dfed4c ("staging: comedi: comedi_test: fix timer lock-up")
Fixes: 0cf55bbef2f9 ("staging: comedi: comedi_test: implement commands
on AO subdevice")
Reported-by: Éric Piel <piel@delmic.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: <stable@vger.kernel.org> # 4.4+
Cc: Éric Piel <piel@delmic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
`daqboard2000_find_boardinfo()` is supposed to check if the
DaqBoard/2000 series model is supported, based on the PCI subvendor and
subdevice ID. The current code is wrong as it is comparing the PCI
device's subdevice ID to an expected, fixed value for the subvendor ID.
It should be comparing the PCI device's subvendor ID to this fixed
value. Correct it.
Fixes: 7e8401b23e7f ("staging: comedi: daqboard2000: add back
subsystem_device check")
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: <stable@vger.kernel.org> # 3.7+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Minor overlapping changes for both merge conflicts.
Resolution work done by Stephen Rothwell was used
as a reference.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Right now, if it's an open of a negative dentry, a race is possible
with several openers who all try to instantiate/rehash the same
dentry and would hit a BUG_ON in d_add.
But in fact if we got a negative dentry in atomic_open, that means
we just revalidated it so no point in talking to MDS at all,
just return ENOENT and make the race go away completely.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Cc: stable <stable@vger.kernel.org> # 4.7+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The 'break' statement after calling ad5933_cmd only breaks out of the
'for' loop, which then unconditionally sets the return value to -EINVAL.
Move the initialisation of 'ret' so we return the correct value.
Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
There are two generics functions phy_ethtool_{get|set}_link_ksettings,
so we can use them instead of defining the same code in the driver.
There was a check on CAP_NET_ADMIN in cvm_oct_set_settings, but this
check is already done in dev_ethtool, so no need to repeat it before
calling the generic function.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phydev in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more vfs updates from Al Viro:
"Assorted cleanups and fixes.
In the "trivial API change" department - ->d_compare() losing 'parent'
argument"
* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
cachefiles: Fix race between inactivating and culling a cache object
9p: use clone_fid()
9p: fix braino introduced in "9p: new helper - v9fs_parent_fid()"
vfs: make dentry_needs_remove_privs() internal
vfs: remove file_needs_remove_privs()
vfs: fix deadlock in file_remove_privs() on overlayfs
get rid of 'parent' argument of ->d_compare()
cifs, msdos, vfat, hfs+: don't bother with parent in ->d_compare()
affs ->d_compare(): don't bother with ->d_inode
fold _d_rehash() and __d_rehash() together
fold dentry_rcuwalk_invalidate() into its only remaining caller
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull qstr constification updates from Al Viro:
"Fairly self-contained bunch - surprising lot of places passes struct
qstr * as an argument when const struct qstr * would suffice; it
complicates analysis for no good reason.
I'd prefer to feed that separately from the assorted fixes (those are
in #for-linus and with somewhat trickier topology)"
* 'work.const-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
qstr: constify instances in adfs
qstr: constify instances in lustre
qstr: constify instances in f2fs
qstr: constify instances in ext2
qstr: constify instances in vfat
qstr: constify instances in procfs
qstr: constify instances in fuse
qstr constify instances in fs/dcache.c
qstr: constify instances in nfs
qstr: constify instances in ocfs2
qstr: constify instances in autofs4
qstr: constify instances in hfs
qstr: constify instances in hfsplus
qstr: constify instances in logfs
qstr: constify dentry_init_security
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull more USB updates from Greg KH:
"Here are a few more straggler patches for USB for 4.8-rc1.
Most of these are for the usb-serial driver tree. All of those have
been in linux-next for a long time, but missed my previous pull
request to you.
The remaining change is to fix up a staging tree build error, due to
some USB gadget driver changes that went in. I put it in this tree as
it was for a USB driver and people are reporting the build error on
your tree.
All of these have been in linux-next for this week, and longer for the
usb-serial changes"
* tag 'usb-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
staging: emxx_udc: allow modular build
USB: serial: use variable for status
USB: serial: option: add support for Telit LE910 PID 0x1206
USB: serial: cp210x: use kmemdup
USB: serial: ti_usb_3410_5052: use functions rather than macros
USB: serial: ti_usb_3410_5052: remove ti_usb_3410_5052.h
USB: serial: ti_usb_3410_5052: use __packed
USB: serial: ti_usb_3410_5052: remove useless comments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media DocBook removal and some fixups from Mauro Carvalho Chehab:
- removal of the media DocBook (since it's all in Sphinx now)
- videobuf2: Fix an allocation regression
- a few fixes related to the CEC drivers
* tag 'media/v4.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] cec: fix off-by-one memset
[media] staging: add MEDIA_SUPPORT dependency
[media] vivid: don't handle CEC_MSG_SET_STREAM_PATH
[media] media: adv7180: Fix broken interrupt register access
[media] vb2: Fix allocation size of dma_parms
[media] vim2m: copy the other colorspace-related fields as well
[media] adv7511: fix VIC autodetect
doc-rst: Remove the media docbook
|
|
Merge drm updates from Dave Airlie:
"This is the main drm pull request for 4.8.
I'm down with a cold at the moment so hopefully this isn't in too bad
a state, I finished pulling stuff last week mostly (nouveau fixes just
went in today), so only this message should be influenced by illness.
Apologies to anyone who's major feature I missed :-)
Core:
Lockless GEM BO freeing
Non-blocking atomic work
Documentation changes (rst/sphinx)
Prep for new fencing changes
Simple display helpers
Master/auth changes
Register/unregister rework
Loads of trivial patches/fixes.
New stuff:
ARM Mali display driver (not the 3D chip)
sii902x RGB->HDMI bridge
Panel:
Support for new panels
Improved backlight support
Bridge:
Convert ADV7511 to bridge driver
ADV7533 support
TC358767 (DSI/DPI to eDP) encoder chip support
i915:
BXT support enabled by default
GVT-g infrastructure
GuC command submission and fixes
BXT workarounds
SKL/BKL workarounds
Demidlayering device registration
Thundering herd fixes
Missing pci ids
Atomic updates
amdgpu/radeon:
ATPX improvements for better dGPU power control on PX systems
New power features for CZ/BR/ST
Pipelined BO moves and evictions in TTM
GPU scheduler improvements
GPU reset improvements
Overclocking on dGPUs with amdgpu
Polaris powermanagement enabled
nouveau:
GK20A/GM20B volt and clock improvements.
Initial support for GP100/GP104 GPUs, GP104 will not yet support
acceleration due to NVIDIA having not released firmware for them as of yet.
exynos:
Exynos5433 SoC with IOMMU support.
vc4:
Shader validation for branching
imx-drm:
Atomic mode setting conversion
Reworked DMFC FIFO allocation
External bridge support
analogix-dp:
RK3399 eDP support
Lots of fixes.
rockchip:
Lots of small fixes.
msm:
DT bindings cleanups
Shrinker and madvise support
ASoC HDMI codec support
tegra:
Host1x driver cleanups
SOR reworking for DP support
Runtime PM support
omapdrm:
PLL enhancements
Header refactoring
Gamma table support
arcgpu:
Simulator support
virtio-gpu:
Atomic modesetting fixes.
rcar-du:
Misc fixes.
mediatek:
MT8173 HDMI support
sti:
ASOC HDMI codec support
Minor fixes
fsl-dcu:
Suspend/resume support
Bridge support
amdkfd:
Minor fixes.
etnaviv:
Enable GPU clock gating
hisilicon:
Vblank and other fixes"
* tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux: (1575 commits)
drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup
drm/nouveau/acpi: fix lockup with PCIe runtime PM
drm/nouveau/acpi: check for function 0x1B before using it
drm/nouveau/acpi: return supported DSM functions
drm/nouveau/acpi: ensure matching ACPI handle and supported functions
drm/nouveau/fbcon: fix font width not divisible by 8
drm/amd/powerplay: remove enable_clock_power_gatings_tasks from initialize and resume events
drm/amd/powerplay: move clockgating to after ungating power in pp for uvd/vce
drm/amdgpu: add query device id and revision id into system info entry at CGS
drm/amdgpu: add new definition in bif header
drm/amd/powerplay: rename smum header guards
drm/amdgpu: enable UVD context buffer for older HW
drm/amdgpu: fix default UVD context size
drm/amdgpu: fix incorrect type of info_id
drm/amdgpu: make amdgpu_cgs_call_acpi_method as static
drm/amdgpu: comment out unused defaults_staturn_pro static const structure to fix the build
drm/amdgpu: enable UVD VM only on polaris
drm/amdgpu: increase timeout of IB test
drm/amdgpu: add destroy session when generate VCE destroy msg.
drm/amd: fix deadlock of job_list_lock V2
...
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull userns vfs updates from Eric Biederman:
"This tree contains some very long awaited work on generalizing the
user namespace support for mounting filesystems to include filesystems
with a backing store. The real world target is fuse but the goal is
to update the vfs to allow any filesystem to be supported. This
patchset is based on a lot of code review and testing to approach that
goal.
While looking at what is needed to support the fuse filesystem it
became clear that there were things like xattrs for security modules
that needed special treatment. That the resolution of those concerns
would not be fuse specific. That sorting out these general issues
made most sense at the generic level, where the right people could be
drawn into the conversation, and the issues could be solved for
everyone.
At a high level what this patchset does a couple of simple things:
- Add a user namespace owner (s_user_ns) to struct super_block.
- Teach the vfs to handle filesystem uids and gids not mapping into
to kuids and kgids and being reported as INVALID_UID and
INVALID_GID in vfs data structures.
By assigning a user namespace owner filesystems that are mounted with
only user namespace privilege can be detected. This allows security
modules and the like to know which mounts may not be trusted. This
also allows the set of uids and gids that are communicated to the
filesystem to be capped at the set of kuids and kgids that are in the
owning user namespace of the filesystem.
One of the crazier corner casees this handles is the case of inodes
whose i_uid or i_gid are not mapped into the vfs. Most of the code
simply doesn't care but it is easy to confuse the inode writeback path
so no operation that could cause an inode write-back is permitted for
such inodes (aka only reads are allowed).
This set of changes starts out by cleaning up the code paths involved
in user namespace permirted mounts. Then when things are clean enough
adds code that cleanly sets s_user_ns. Then additional restrictions
are added that are possible now that the filesystem superblock
contains owner information.
These changes should not affect anyone in practice, but there are some
parts of these restrictions that are changes in behavior.
- Andy's restriction on suid executables that does not honor the
suid bit when the path is from another mount namespace (think
/proc/[pid]/fd/) or when the filesystem was mounted by a less
privileged user.
- The replacement of the user namespace implicit setting of MNT_NODEV
with implicitly setting SB_I_NODEV on the filesystem superblock
instead.
Using SB_I_NODEV is a stronger form that happens to make this state
user invisible. The user visibility can be managed but it caused
problems when it was introduced from applications reasonably
expecting mount flags to be what they were set to.
There is a little bit of work remaining before it is safe to support
mounting filesystems with backing store in user namespaces, beyond
what is in this set of changes.
- Verifying the mounter has permission to read/write the block device
during mount.
- Teaching the integrity modules IMA and EVM to handle filesystems
mounted with only user namespace root and to reduce trust in their
security xattrs accordingly.
- Capturing the mounters credentials and using that for permission
checks in d_automount and the like. (Given that overlayfs already
does this, and we need the work in d_automount it make sense to
generalize this case).
Furthermore there are a few changes that are on the wishlist:
- Get all filesystems supporting posix acls using the generic posix
acls so that posix_acl_fix_xattr_from_user and
posix_acl_fix_xattr_to_user may be removed. [Maintainability]
- Reducing the permission checks in places such as remount to allow
the superblock owner to perform them.
- Allowing the superblock owner to chown files with unmapped uids and
gids to something that is mapped so the files may be treated
normally.
I am not considering even obvious relaxations of permission checks
until it is clear there are no more corner cases that need to be
locked down and handled generically.
Many thanks to Seth Forshee who kept this code alive, and putting up
with me rewriting substantial portions of what he did to handle more
corner cases, and for his diligent testing and reviewing of my
changes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (30 commits)
fs: Call d_automount with the filesystems creds
fs: Update i_[ug]id_(read|write) to translate relative to s_user_ns
evm: Translate user/group ids relative to s_user_ns when computing HMAC
dquot: For now explicitly don't support filesystems outside of init_user_ns
quota: Handle quota data stored in s_user_ns in quota_setxquota
quota: Ensure qids map to the filesystem
vfs: Don't create inodes with a uid or gid unknown to the vfs
vfs: Don't modify inodes with a uid or gid unknown to the vfs
cred: Reject inodes with invalid ids in set_create_file_as()
fs: Check for invalid i_uid in may_follow_link()
vfs: Verify acls are valid within superblock's s_user_ns.
userns: Handle -1 in k[ug]id_has_mapping when !CONFIG_USER_NS
fs: Refuse uid/gid changes which don't map into s_user_ns
selinux: Add support for unprivileged mounts from user namespaces
Smack: Handle labels consistently in untrusted mounts
Smack: Add support for unprivileged mounts from user namespaces
fs: Treat foreign mounts as nosuid
fs: Limit file caps to the user namespace of the super block
userns: Remove the now unnecessary FS_USERNS_DEV_MOUNT flag
userns: Remove implicit MNT_NODEV fragility.
...
|
|
Merge more updates from Andrew Morton:
"The rest of MM"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (101 commits)
mm, compaction: simplify contended compaction handling
mm, compaction: introduce direct compaction priority
mm, thp: remove __GFP_NORETRY from khugepaged and madvised allocations
mm, page_alloc: make THP-specific decisions more generic
mm, page_alloc: restructure direct compaction handling in slowpath
mm, page_alloc: don't retry initial attempt in slowpath
mm, page_alloc: set alloc_flags only once in slowpath
lib/stackdepot.c: use __GFP_NOWARN for stack allocations
mm, kasan: switch SLUB to stackdepot, enable memory quarantine for SLUB
mm, kasan: account for object redzone in SLUB's nearest_obj()
mm: fix use-after-free if memory allocation failed in vma_adjust()
zsmalloc: Delete an unnecessary check before the function call "iput"
mm/memblock.c: fix index adjustment error in __next_mem_range_rev()
mem-hotplug: alloc new page from a nearest neighbor node when mem-offline
mm: optimize copy_page_to/from_iter_iovec
mm: add cond_resched() to generic_swapfile_activate()
Revert "mm, mempool: only set __GFP_NOMEMALLOC if there are free elements"
mm, compaction: don't isolate PageWriteback pages in MIGRATE_SYNC_LIGHT mode
mm: hwpoison: remove incorrect comments
make __section_nr() more efficient
...
|
|
The unused bytes of the features array should be zeroed, but the start index was one
byte too early. This caused the device features byte to be overwritten by 0.
The compliance test for the CEC_S_LOG_ADDRS ioctl didn't catch this because it tested
byte continuation with the second device features byte being 0 :-(
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
staging media drivers tend to have a build time dependency on the
media support. In particular, the newly added pulse8 cec driver can
only be a loadable module if MEDIA_SUPPORT=m, but its build dependency
is on a 'bool' symbol (MEDIA_CEC), so a randconfig build can fail
with pulse8_cec built-in:
drivers/staging/built-in.o: In function `pulse8_disconnect':
dgnc_utils.c:(.text+0x114): undefined reference to `cec_unregister_adapter'
drivers/staging/built-in.o: In function `pulse8_irq_work_handler':
dgnc_utils.c:(.text+0x1bc): undefined reference to `cec_transmit_done'
dgnc_utils.c:(.text+0x1d8): undefined reference to `cec_received_msg'
dgnc_utils.c:(.text+0x1f4): undefined reference to `cec_transmit_done'
dgnc_utils.c:(.text+0x218): undefined reference to `cec_transmit_done'
dgnc_utils.c:(.text+0x23c): undefined reference to `cec_transmit_done'
drivers/staging/built-in.o: In function `pulse8_connect':
dgnc_utils.c:(.text+0x844): undefined reference to `cec_allocate_adapter'
dgnc_utils.c:(.text+0x8a4): undefined reference to `cec_delete_adapter'
dgnc_utils.c:(.text+0xa10): undefined reference to `cec_register_adapter'
Originally, MEDIA_CEC itself was a tristate symbol, which would have
prevented this, but since 5bb2399a4fe4 ("[media] cec: fix Kconfig
dependency problems"), it doesn't work like that any more.
This encloses all of the staging media drivers in a CONFIG_MEDIA_SUPPORT
dependency in Kconfig, which solves the problem by enforcing that none
of the drivers can be built-in if the media core is a module.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There are now a number of accounting oddities such as mapped file pages
being accounted for on the node while the total number of file pages are
accounted on the zone. This can be coped with to some extent but it's
confusing so this patch moves the relevant file-based accounted. Due to
throttling logic in the page allocator for reliable OOM detection, it is
still necessary to track dirty and writeback pages on a per-zone basis.
[mgorman@techsingularity.net: fix NR_ZONE_WRITE_PENDING accounting]
Link: http://lkml.kernel.org/r/1468404004-5085-5-git-send-email-mgorman@techsingularity.net
Link: http://lkml.kernel.org/r/1467970510-21195-20-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This moves the LRU lists from the zone to the node and related data such
as counters, tracing, congestion tracking and writeback tracking.
Unfortunately, due to reclaim and compaction retry logic, it is
necessary to account for the number of LRU pages on both zone and node
logic. Most reclaim logic is based on the node counters but the retry
logic uses the zone counters which do not distinguish inactive and
active sizes. It would be possible to leave the LRU counters on a
per-zone basis but it's a heavier calculation across multiple cache
lines that is much more frequent than the retry checks.
Other than the LRU counters, this is mostly a mechanical patch but note
that it introduces a number of anomalies. For example, the scans are
per-zone but using per-node counters. We also mark a node as congested
when a zone is congested. This causes weird problems that are fixed
later but is easier to review.
In the event that there is excessive overhead on 32-bit systems due to
the nodes being on LRU then there are two potential solutions
1. Long-term isolation of highmem pages when reclaim is lowmem
When pages are skipped, they are immediately added back onto the LRU
list. If lowmem reclaim persisted for long periods of time, the same
highmem pages get continually scanned. The idea would be that lowmem
keeps those pages on a separate list until a reclaim for highmem pages
arrives that splices the highmem pages back onto the LRU. It potentially
could be implemented similar to the UNEVICTABLE list.
That would reduce the skip rate with the potential corner case is that
highmem pages have to be scanned and reclaimed to free lowmem slab pages.
2. Linear scan lowmem pages if the initial LRU shrink fails
This will break LRU ordering but may be preferable and faster during
memory pressure than skipping LRU pages.
Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This changes the vfs dentry hashing to mix in the parent pointer at the
_beginning_ of the hash, rather than at the end.
That actually improves both the hash and the code generation, because we
can move more of the computation to the "static" part of the dcache
setup, and do less at lookup runtime.
It turns out that a lot of other hash users also really wanted to mix in
a base pointer as a 'salt' for the hash, and so the slightly extended
interface ends up working well for other cases too.
Users that want a string hash that is purely about the string pass in a
'salt' pointer of NULL.
* merge branch 'salted-string-hash':
fs/dcache.c: Save one 32-bit multiply in dcache lookup
vfs: make the string hashes salt the hash
|
|
Pull networking updates from David Miller:
1) Unified UDP encapsulation offload methods for drivers, from
Alexander Duyck.
2) Make DSA binding more sane, from Andrew Lunn.
3) Support QCA9888 chips in ath10k, from Anilkumar Kolli.
4) Several workqueue usage cleanups, from Bhaktipriya Shridhar.
5) Add XDP (eXpress Data Path), essentially running BPF programs on RX
packets as soon as the device sees them, with the option to mirror
the packet on TX via the same interface. From Brenden Blanco and
others.
6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet.
7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli.
8) Simplify netlink conntrack entry layout, from Florian Westphal.
9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido
Schimmel, Yotam Gigi, and Jiri Pirko.
10) Add SKB array infrastructure and convert tun and macvtap over to it.
From Michael S Tsirkin and Jason Wang.
11) Support qdisc packet injection in pktgen, from John Fastabend.
12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy.
13) Add NV congestion control support to TCP, from Lawrence Brakmo.
14) Add GSO support to SCTP, from Marcelo Ricardo Leitner.
15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni.
16) Support MPLS over IPV4, from Simon Horman.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits)
xgene: Fix build warning with ACPI disabled.
be2net: perform temperature query in adapter regardless of its interface state
l2tp: Correctly return -EBADF from pppol2tp_getname.
net/mlx5_core/health: Remove deprecated create_singlethread_workqueue
net: ipmr/ip6mr: update lastuse on entry change
macsec: ensure rx_sa is set when validation is disabled
tipc: dump monitor attributes
tipc: add a function to get the bearer name
tipc: get monitor threshold for the cluster
tipc: make cluster size threshold for monitoring configurable
tipc: introduce constants for tipc address validation
net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update()
MAINTAINERS: xgene: Add driver and documentation path
Documentation: dtb: xgene: Add MDIO node
dtb: xgene: Add MDIO node
drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset
drivers: net: xgene: Use exported functions
drivers: net: xgene: Enable MDIO driver
drivers: net: xgene: Add backward compatibility
drivers: net: phy: xgene: Add MDIO driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new framework support for HDMI CEC and remote control support
- new encoding codec driver for Mediatek SoC
- new frontend driver: helene tuner
- added support for NetUp almost universal devices, with supports
DVB-C/S/S2/T/T2 and ISDB-T
- the mn88472 frontend driver got promoted from staging
- a new driver for RCar video input
- some soc_camera legacy drivers got removed: timb, omap1, mx2, mx3
- lots of driver cleanups, improvements and fixups
* tag 'media/v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
[media] cec: always check all_device_types and features
[media] cec: poll should check if there is room in the tx queue
[media] vivid: support monitor all mode
[media] cec: fix test for unconfigured adapter in main message loop
[media] cec: limit the size of the transmit queue
[media] cec: zero unused msg part after msg->len
[media] cec: don't set fh to NULL in CEC_TRANSMIT
[media] cec: clear all status fields before transmit and always fill in sequence
[media] cec: CEC_RECEIVE overwrote the timeout field
[media] cxd2841er: Reading SNR for DVB-C added
[media] cxd2841er: Reading BER and UCB for DVB-C added
[media] cxd2841er: fix switch-case for DVB-C
[media] cxd2841er: fix signal strength scale for ISDB-T
[media] cxd2841er: adjust the dB scale for DVB-C
[media] cxd2841er: provide signal strength for DVB-C
[media] cxd2841er: fix BER report via DVBv5 stats API
[media] mb86a20s: apply mask to val after checking for read failure
[media] airspy: fix error logic during device register
[media] s5p-cec/TODO: add TODO item
[media] cec/TODO: drop comment about sphinx documentation
...
|
|
A change to the usb gadget core allowed certain API functions to be
part of a loadable module, which breaks having emxx_udc built-in:
drivers/staging/built-in.o: In function `nbu2ss_drv_probe':
(.text+0x2428): undefined reference to `usb_ep_set_maxpacket_limit'
The original patch already fixed tons of other cases that have the
added dependency but apparently missed this one that now appears
in an ARM allmodconfig build.
This patch makes the symbol "tristate", which lets the Kconfig
dependency tracking handle it correctly. To make the module
actually usable, I also revert 0af61e66ee16 ("drivers/staging:
make emxx_udc.c explicitly non-modular"), which Paul Gortmaker
added after noticing that the Kconfig symbol was 'bool'.
Compared to the original version however, I leave out the
'__exit' annotation on the remove callback, as Paul pointed
out that this was incorrect.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 5a8d651a2bde ("usb: gadget: move gadget API functions to udc-core")
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Linux 4.7
As requested by Daniel Vetter as the conflicts were getting messy.
|
|
Even when the adapter is configured for CEC 1.4, we still check and
use the CEC 2.0 parts of struct cec_log_addrs. Although these aren't
used in CEC messages, the information contained in them is still of
use in the CEC framework itself, so keep this information.
Also zero the unused trailing features[] data and unused logical address
data so the contents isn't random data.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
For POLLOUT poll only checked if the adapter was configured, not
if there was room in the transmit queue. Add that check.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The main message loop checks if the physical address was valid, and if
not it is assumed that the adapter had been unconfigured.
However, this check is no longer correct, instead it should check
that both adap->is_configured and adap->is_configuring are false.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The size of the transmit queue was unlimited, which meant that
in non-blocking mode you could flood the CEC adapter with messages
to be transmitted.
Limit this to 18 messages.
Also print the number of pending transmits and the timeout value
in the status debugfs file.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
