Age | Commit message (Collapse) | Author |
|
In some advanced usage or debug scenarios, it could interesting to
change the value of ps_timeout or eventually to force use of PS-Poll
frames.
The wext API (used by iwconfig) provide a way to change ps_timeout.
However, this API is obsolete and it seems a little weird to use (it
seems it does apply the change, so the user have to disable then
re-enable de power save)
On side of nl80211, there is no way to change the ps_timeout.
This patch provides a file in debugfs to change the value of ps_timeout.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-13-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The device handles 4 queues (one per AC) for each virtual interface (and
maximum 4 virtual interfaces). Until now the driver unified the queue of
all interfaces and handled only 4 queues for whole device.
This architecture did not allow to balance the traffic between the vif. So,
this patch relocate the queues into the vif and change the API accordingly.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
During the calibration of the RF amplifier, the device is able to provide
some data about the status of the amplifier.
Record these data and expose them in debugfs.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200526171821.934581-5-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Strings are allowed to exceed 80 columns but, in this case, the format
arguments should be placed on a new line. Apply this rule to the whole
code of the driver.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200515083325.378539-3-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The field 'status' appears in most of structs returned by the hardware.
This field is encoded as little endian. Sparse complains this field is
not always correctly accessed:
drivers/staging/wfx/data_rx.c:53:16: warning: restricted __le32 degrades to integer
drivers/staging/wfx/data_rx.c:84:16: warning: restricted __le32 degrades to integer
drivers/staging/wfx/data_tx.c:526:24: warning: restricted __le32 degrades to integer
drivers/staging/wfx/data_tx.c:569:23: warning: restricted __le32 degrades to integer
drivers/staging/wfx/hif_rx.c:128:33: warning: restricted __le32 degrades to integer
drivers/staging/wfx/./traces.h:401:1: warning: restricted __le32 degrades to integer
drivers/staging/wfx/./traces.h:401:1: warning: restricted __le32 degrades to integer
In most of cases, this field is only compared with HIF_STATUS values.
Finally, it is more convenient to solve the problem by defining the
HIF_STATUS values directly in little endian.
It is also the right time to make some clean up in the HIF_STATUS names.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-15-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The kernel coding style promotes the use of kernel types (u8, u16, u32,
etc...) instead of the C99 ones.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200505123757.39506-16-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The kernel coding style expects no space after cast operator. This patch
make the wfx driver compliant with this rule.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200505123757.39506-15-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some function prototypes were not correctly aligned and/or exceed 80
columns.
In some other cases, the prototypes were written on more lines than
necessary.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200505123757.39506-14-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In order to keep the compilation times reasonable, we try to only
include the necessary headers (especially header included from other
headers).
This patch clean up unnecessary headers inclusions.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200505123757.39506-13-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When the chip starts in SDIO mode, the external IRQ (aka Out-Of-Band
IRQ) cannot be used before to configure it. Therefore, the first
exchanges with the chip have to be done without the OOB IRQ.
This patch allow to poll the data until the OOB IRQ is correctly setup.
In order to keep the code simpler, this patch also poll data even if OOB
IRQ is not used.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200505123757.39506-9-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In case of error in wfx_probe(), wdev->hw is freed. Since an error
occurred, wfx_free_common() is called, then wdev->hw is freed again.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Fixes: 4033714d6cbe ("staging: wfx: fix init/remove vs IRQ race")
Link: https://lore.kernel.org/r/20200505123757.39506-4-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The device take a few hundreds of milliseconds to start. However, the
current code wait up to 10 second for the chip. We can safely reduce
this value to 1 second. Thanks to that change, it is no more necessary
to use an interruptible timeout.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200505123757.39506-3-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The highest Rx value declared in ieee80211_supported_band had two
problems:
1. The value should be little endian
2. ShortGI was not taken into account. So value should be 72 instead
of 65.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200427134031.323403-9-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Device is able to detect a high temperature. In this case, the traffic
is not allowed to be sent until the temperature decrease.
This patch detects the warnings raised by the device and stop the
traffic accordingly. It also add a delayed task as safeguard in case the
chip would never send the indication that the temperature decrease.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200427134031.323403-7-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently code handle WEP keys manually. It is far easier to use
the set_default_unicast_key() callback provided by mac80211.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-11-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The only reason we ask to mac80211 to wait for a dtim before to
associate is to get an accurate DTIM value. However, we can temporary
set the dtim period to 1. Then we can waiting for
BSS_CHANGED_BEACON_INFO for the real value. Thus, the association
process is faster.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200415161147.69738-7-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, IBSS networks are started by the mean of
wfx_bss_info_changed(). It easier to use use callbacks provided by
mac80211.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200410133239.438347-16-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, wfx_bss_info_changed() check interface status changes and
guess when the pattern match with an AP start and AP stop (through
wfx_update_beaconing()). It is far easier to rely on start_ap and
stop_ap callbacks provided by mac80211.
wfx_bss_info_changed() keeps only the responsibility of updating the
frame templates.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200410133239.438347-5-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The definitions LINK_ID_NO_ASSOC and MAX_STA_IN_AP_MODE are imposed by
the hardware. Therefore, they should be located in the hardware
interface API.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200406111756.154086-3-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Until now, wfx_flush() flushed queue for while device instead of only
the queue of the intended vif. It sometime failed with a timeout, but
this error was not reported.
Moreover, if the device was frozen, wfx_flush didn't do anything and it
results a potential warning (and maybe a resource leak) when the frozen
device was unregistered.
We can also notice that wfx_tx_queues_wait_empty_vif() did only exist to
work around the broken feature of wfx_flush().
This patch repair wfx_flush() and therefore drop
wfx_tx_queues_wait_empty_vif().
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-29-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, the driver tracks power save state of the stations with the
variable sta_asleep_mask. Then, it takes care to not sent data to asleep
stations.
However, this work is already done by mac80211. Normally, there are no
frames for asleep stations in our queues. So, driver do not have to
filter frames in its queues (apart the frames marked "AFTER_DTIM").
Notice that there is a risk of race between state of the station and
data send to the firmware. However, this risk is limited since the
number of frame in queues are small. In add, this race also exists with
the current code. Anyway, the firmware is able to detect the problem and
driver will receive a 'REQUEUE' status (translated in
TX_STAT_TX_FILTERED for mac80211).
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-13-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Driver calls GPIO get/set only from non-atomic context and so can use any
GPIOs.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/cb19e7c521712d5a166e0b7e9cac4450798fdce0.1581416843.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Current code races in init/exit with interrupt handlers. This is noticed
by the warning below. Fix it by using devres for ordering allocations and
IRQ de/registration.
WARNING: CPU: 0 PID: 827 at drivers/staging/wfx/bus_spi.c:142 wfx_spi_irq_handler+0x5c/0x64 [wfx]
race condition in driver init/deinit
Cc: stable@vger.kernel.org
Fixes: 0096214a59a7 ("staging: wfx: add support for I/O access")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/f0c66cbb3110c2736cd4357c753fba8c14ee3aee.1581416843.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
mac80211 and the device are both able to control power-save per vif.
But, the current code retrieve power-save from wfx_config(). So, it does
not allow to setup power-save independently for each vif. Driver just
has to rely on wfx_bss_info_changed() instead of wfx_config().
wfx_config() has nothing to do anymore, but we keep it since it is
mandatory for mac80211.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200115135338.14374-41-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some userspace tools (hostapd) rely on probe_resp_offload fields for
certain features.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200115135338.14374-4-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The device provides an API to abort a scan request. Expose this feature
to mac80211.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-55-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Obviously, current code can be replaced by IS_ERR_OR_NULL().
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-16-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The sum of all retries for a Tx frame cannot be superior to 32.
There are 4 rates at most. So this patch limits number of retries per
rate to 8.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Align to fix multiple warnings of line over 80 characters.
Issue detected by checkpatch tool.
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Link: https://lore.kernel.org/r/20191113110052.14855-1-jbi.octave@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
MAC address read from chip is unconditionally used even if a MAC
address is configured in device tree.
Reported-by: Marc Dorval <marc.dorval@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191017093954.657-5-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In most case, of_get_mac_address() return NULL in case of error.
However, if CONFIG_OF_NET is not set, it return -ENODEV.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191017093954.657-4-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
"Secure link" feature is not available in in-tree driver (because it
depends on mbedtls). Thus, secure_link.h only empty functions.
Module parameter "slk_key" and associated function wfx_fill_sl_key() had
an unjustifiable place in main.c. This patch relocate them to
secure_link.h.
BTW, content of wfx_fill_sl_key() is now useless. Just keep a warning if
user try to use "slk_key" attribute (unsupported by this driver).
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191017093954.657-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
wfx_version.h says that this code is same same than driver 2.3.1 hosted
on github:
https://github.com/siliconlabs/wfx-linux-driver/tree/2.3.1-public
However, it is inaccurate, driver in-tree contains multiple small
patches ahead 2.3.1.
I prefer to drop this confusing information.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191017093954.657-1-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a spelling mistake in the documentation and a module parameter
description. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20191008082205.19740-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Finish to fill struct ieee80211_ops with necessary callbacks. Driver is
now ready to be registered to mac80211.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20190919142527.31797-21-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
wfx_set_key() mostly copy bytes on correct offsets. A big piece of code
for a simple work. Unfortunately, I did not found any way to factorize
it.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20190919142527.31797-20-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Chip can make foreground scan or background, but both can't be mixed in
same request. So, we need to split each mac80211 requests into multiple
HIF requests.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20190919142527.31797-19-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Three things make this task more complex than it should:
- Chip necessitate to associate a link-id to each station. It is same
thing than association ID but, using 8 bits only.
- Rate policy is sent separately from Tx frames
- Driver try to handle itself power saving of stations and multicast
data
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20190919142527.31797-17-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add traces when debug events happen and allow to ask internal
information to chip.
These features work independently from mac80211.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20190919142527.31797-16-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A few tasks remain to be done in order to finish chip initial
configuration:
- configure chip to use multi-tx confirmation (speed up data
transfer)
- configure chip to use wake-up feature (save power consumption
during runtime)
- set hardware configuration (clocks, RF, pinout, etc...) using a
Platform Data Set (PDS) file
On release, driver completely shutdown the chip to save power
consumption.
Documentation about PDS and PDS data for sample boards are available
here[1]. One day, PDS data may find a place in device tree but,
currently, PDS is too much linked with firmware to allowing that.
This patch also add "send_pds" file in debugfs to be able to dynamically
change PDS (only for debug, of course).
[1]: https://github.com/SiliconLabs/wfx-firmware/tree/master/PDS
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20190919142527.31797-15-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Chip support encryption of the link between host and chip. This feature
is called "secure link". Driver code on github[1] support it. However,
it relies on mbedtls for cryptographic functions. So, I decided to not
import this feature in current patch. However, in order to keep code
synchronized between github and kernel, I imported all code related to
this feature, even if most of it is just no-op.
[1]: https://github.com/SiliconLabs/wfx-linux-driver/
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20190919142527.31797-14-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Chip has multiple input buffers and can handle multiple 802.11 frames
in parallel. However, other HIF command must be sent sequentially.
wsm_send_cmd() handles these requests.
This commit also add send_hif_cmd in debugfs. This file allows to send
arbitrary commands to chip. It can be used for debug and testing.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20190919142527.31797-12-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allocate a struct ieee80211_hw but do not yet register it.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20190919142527.31797-11-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Once firmware is loaded, it send a first indication to host. This
indication signalize that host can start to communicate with firmware.
In add, it contains information about chip and firmware (MAC addresses,
firmware version, etc...).
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20190919142527.31797-10-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
bh_work() is in charge to schedule all HIF message from/to chip.
On normal operation, when an IRQ is received, driver can get size of
next message in control register. In order to save control register
access, when chip send a message, it also appends a copy of control
register after the message (this register is not accounted in message
length declared in message header, but must accounted in bus request).
This copy of control register is called "piggyback".
It also handles a power saving mechanism specific to WFxxx series. This
mechanism is based on a GPIO called "wakeup" GPIO. Obviously, this gpio
is not part of SPI/SDIO standard buses and must be declared
independently (this is the main reason for why SDIO mode try to get
parameters from DT).
When wakeup is enabled, host can communicate with chip only if it is
awake. To wake up chip, there are two cases:
- host receive an IRQ from chip (chip initiate communication): host
just have to set wakeup GPIO before reading data
- host want to send data to chip: host set wakeup GPIO, then wait
for an IRQ (in fact, wait for an empty message) and finally send data
bh_work() is also in charge to track usage of chip buffers. Normally
each request expect a confirmation. However, you can notice that special
"multi tx" confirmation can acknowledge multiple requests at time.
Finally, note that wfx_bh_request_rx() is not atomic (because of
control_reg_read()). So, in SPI mode, hard-irq handler only postpone all
processing to wfx_spi_request_rx().
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20190919142527.31797-8-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A firmware is necessary to run the chip. wfx_init_device() is in charge
of loading firmware on chip and doing low level initialization.
Firmwares for WF200 are available here:
https://github.com/SiliconLabs/wfx-firmware/
Note that firmware are encrypted. Driver checks that key used to encrypt
firmware match with key burned into chip.
Currently, "C0" key is used for production chips.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20190919142527.31797-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce bus level communication layer. At this level, 7 registers can
be addressed.
Notice that SPI driver is able to manage chip reset. SDIO mode relies
on an external driver (`mmc-pwrseq`) to reset chip.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20190919142527.31797-3-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Instantiate build infrastructure WFx driver. This driver provides support
for Wifi chipset Silicon Labs WF200 and further:
https://www.silabs.com/documents/public/data-sheets/wf200-datasheet.pdf
This chip support SPI and SDIO bus.
SDIO interface has two particularities:
1. Some parameters may be useful for end user (I will talk about
gpio_wakeup later).
2. The SDIO VID and PID of WF200 are 0000:0001 which are too much
generic to rely on.
So, current code checks VID/PID and looks for a node in DT (since WF200
targets embedded platforms, I don't think it is a problem to rely on
DT). DT can also be used to define to parameters for driver. Currently,
if no node is found, a warning is emitted, but it could be changed in
error.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20190919142527.31797-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|