summaryrefslogtreecommitdiff
path: root/drivers/spi
AgeCommit message (Collapse)Author
2016-12-14spi: armada-3700: fix unsigned compare than zero on irqColin Ian King
spi->irq is an unsigned integer hence the check if status is less than zero has no effect. Fix this by replacing spi->irq with an int irq so the less than zero compare will correctly detect errors. Issue found with static analysis with CoverityScan, CID1388567 Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Romain Perier <romain.perier@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-12Merge remote-tracking branches 'spi/topic/spidev', 'spi/topic/sunxi', ↵Mark Brown
'spi/topic/ti-qspi', 'spi/topic/topcliff-pch' and 'spi/topic/xlp' into spi-next
2016-12-12Merge remote-tracking branches 'spi/topic/orion', 'spi/topic/pxa2xx', ↵Mark Brown
'spi/topic/rspi' and 'spi/topic/s3c64xx' into spi-next
2016-12-12Merge remote-tracking branches 'spi/topic/fsl-lpspi', 'spi/topic/imx', ↵Mark Brown
'spi/topic/jcore' and 'spi/topic/omap' into spi-next
2016-12-12Merge remote-tracking branches 'spi/topic/delay', 'spi/topic/dw', ↵Mark Brown
'spi/topic/fsl-dspi' and 'spi/topic/fsl-espi' into spi-next
2016-12-12Merge remote-tracking branches 'spi/topic/armada', 'spi/topic/ath79', ↵Mark Brown
'spi/topic/atmel' and 'spi/topic/axi' into spi-next
2016-12-12Merge remote-tracking branch 'spi/topic/rcar' into spi-nextMark Brown
2016-12-12Merge remote-tracking branch 'spi/topic/dma' into spi-nextMark Brown
2016-12-12Merge remote-tracking branch 'spi/topic/core' into spi-nextMark Brown
2016-12-12Merge remote-tracking branches 'spi/fix/atmel', 'spi/fix/mvbeu' and ↵Mark Brown
'spi/fix/spidev' into spi-linus
2016-12-08spi: mvebu: fix baudrate calculation for armada variantUwe Kleine-König
The calculation of SPR and SPPR doesn't round correctly at several places which might result in baud rates that are too big. For example with tclk_hz = 250000001 and target rate 25000000 it determined a divider of 10 which is wrong. Instead of fixing all the corner cases replace the calculation by an algorithm without a loop which should even be quicker to execute apart from being correct. Fixes: df59fa7f4bca ("spi: orion: support armada extended baud rates") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-08spi: Add support for Armada 3700 SPI ControllerRomain Perier
Marvell Armada 3700 SoC comprises an SPI Controller. This Controller supports up to 4 SPI slave devices, with dedicated chip selects,supports SPI mode 0/1/2 and 3, CPIO or Fifo mode with DMA transfers and different SPI transfer mode (Single, Dual or Quad). This commit adds basic driver support for FIFO mode. In this mode, dedicated registers are used to store the instruction, the address, the read mode and the data. Write and Read FIFO are used to store the outcoming or incoming data. The data FIFOs are accessible via DMA or by the CPU. Only the CPU is supported for now. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-05spi: fsl-lpspi: quit reading rx fifo under error conditionGao Pan
In case that error occurs during waiting for txfifo empty, it is not necessary to read rx fifo. It's better to return directly. Signed-off-by: Gao Pan <pandy.gao@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-05spi: fsl-lpspi: use GPL as module licenseGao Pan
At the beginning of lpspi driver, it is claimed that the dirver is under the terms of the GNU General Public License, either version 2 of the License. While at the end I only declared GPL V2. This patch make the license consistent. Signed-off-by: Gao Pan <pandy.gao@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-01spi: fsl-espi: fix ioread16/iowrite16 endiannessHeiner Kallweit
fsl_espi_read_reg16 / fsl_espi_write_reg16 are supposed to read / write big endian values. Therefore ioread16be / iowrite16be have to be used. Fixes: 058234328445 ("eliminate need for linearization when writing to hardware") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30spi: fsl-espi: remove unused linearization codeHeiner Kallweit
After introducing direct transfers between hardware and transfer buffers remove all code which is unused now. This includes getting rid of the 64k linearization buffer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30spi: fsl-espi: eliminate need for linearization when reading from hardwareHeiner Kallweit
Eliminate need for linearization when reading from the hardware and write to the transfer buffers directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30spi: fsl-espi: eliminate need for linearization when writing to hardwareHeiner Kallweit
Eliminate need for linearization when writing to the hardware and read from the transfer buffers directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30spi: fsl-espi: determine need for byte swap only onceHeiner Kallweit
Determine need for byte swap only once and store it in new member swab in struct fsl_espi. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30spi: fsl-lpspi: read lpspi tx/rx fifo size in probe()Gao Pan
The lpspi tx/rx fifo size is a read only parameter resides lpspi Parameter Register. It's better to read lpspi tx/rx fifo size in probe(). Signed-off-by: Gao Pan <pandy.gao@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30spi: fsl-lpspi: use wait_for_completion_timeout() while waiting transfer doneGao Pan
It's a potential problem to use wait_for_completion() because the completion condition may never come. Thus, it's better to repalce wait_for_completion() with wait_for_completion_timeout(). Signed-off-by: Gao Pan <pandy.gao@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30spi: orion: fix comment to mention MVEBUUwe Kleine-König
MVEBU chips (Armada XP, Armada 370 and others) are supported by this driver. Mention this in the help text to make more obvious what is already specified in the dependencies of this symbol. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-25spi: atmel: remove the use of private channel fieldsNicolas Ferre
For DMA transfers, we now use the core DMA framework which provides channel fields in the spi_master structure. Remove the private channels from atmel_spi stucture which were located in a sub-structure. This last one (atmel_spi_dma) which is now empty is also removed. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-25spi: atmel: trivial: remove unused fields in DMA structureNicolas Ferre
The atmel_spi_dma structure was cluttered with unused fields relative to older DMA channel selection API. Remove them. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-25spi: atmel: Use SPI core DMA mapping frameworkCyrille Pitchen
Use the SPI core DMA mapping framework instead of our own in case of DMA support. PDC support is not converted to this framework. The driver is now able to transfer a complete sg list through DMA. This eventually fix an issue with vmalloc'ed DMA memory that is provided for example by UBI/UBIFS layers. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> [nicolas.ferre@atmel.com: restrict the use to non-PDC DMA] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-25spi: atmel: Use core SPI_MASTER_MUST_[RT]X handlingNicolas Ferre
We need both RX and TX data for each transfer in any case (PIO, PDC, DMA). So convert the driver to the core dummy buffer handling with the SPI_MASTER_MUST_RX/SPI_MASTER_MUST_TX infrastructure. This move changes the maximum PDC/DMA buffer handling to 65535 bytes instead of a single page and sets master->max_dma_len to this value. All dummy buffer management is removed from the driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-25spi: atmel: trivial: move info banner to latest probe actionNicolas Ferre
The info banner is here to tell that everything went well, so place it at the very end of the probe function. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-25spi: imx: replace schedule() with cond_resched()Gao Pan
It's more rational that just do the schedule when necessary other than do it every time. Thus, it's better to replace schedule() with cond_resched() in fsl_lpspi_txfifo_empty(), which contributes to saving cpu time. Signed-off-by: Gao Pan <pandy.gao@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-25spi: imx: fix potential shift truncationGao Pan
There is a static checker warning in fsl_lpspi_set_cmd(). I intended to write "temp |= (fsl_lpspi->config.mode & 0x3) << 30", but used "temp |= (fsl_lpspi->config.mode & 0x11) << 30" by mistake. This patch fixes this potential shift truncation. Signed-off-by: Gao Pan <pandy.gao@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-25spi: imx: use prepare_transfer_hardware() for lpspiGao Pan
The old driver enable clk in fsl_lpspi_prepare_message() and disable clk in fsl_lpspi_unprepare_message(). Rather than doing this per message it's a bit better to do it in prepare_transfer_hardware(), that way if there's a sequence of messages queued one after another we don't turn the clock on and off all the time. Signed-off-by: Gao Pan <pandy.gao@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-23spi: ath79: Fix module autoload for OF registrationJavier Martinez Canillas
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/spi/spi-ath79.ko | grep alias alias: platform:ath79-spi After this patch: $ modinfo drivers/spi/spi-ath79.ko | grep alias alias: platform:ath79-spi alias: of:N*T*Cqca,ar7100-spiC* alias: of:N*T*Cqca,ar7100-spi Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-23spi: xlp: Fix module autoload for OF registrationJavier Martinez Canillas
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/spi/spi-xlp.ko | grep alias alias: acpi*:BRCM900D:* After this patch: $ modinfo drivers/spi/spi-xlp.ko | grep alias alias: acpi*:BRCM900D:* alias: of:N*T*Cnetlogic,xlp832-spiC* alias: of:N*T*Cnetlogic,xlp832-spi Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-23spi: jcore: Fix module autoload for OF registrationJavier Martinez Canillas
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/spi/spi-jcore.ko | grep alias alias: platform:jcore_spi After this patch: $ modinfo drivers/spi/spi-jcore.ko | grep alias alias: platform:jcore_spi alias: of:N*T*Cjcore,spi2C* alias: of:N*T*Cjcore,spi2 Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-23spi: spi-axi: Fix module autoloadJavier Martinez Canillas
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/spi/spi-axi-spi-engine.ko | grep alias $ After this patch: $ modinfo drivers/spi/spi-axi-spi-engine.ko | grep alias alias: of:N*T*Cadi,axi-spi-engine-1.00.aC* alias: of:N*T*Cadi,axi-spi-engine-1.00.a Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-22spi: imx: add lpspi bus driverGao Pan
This patch adds lpspi driver to support new i.MX products which use lpspi instead of ecspi. The lpspi can continue operating in stop mode when an appropriate clock is available. It is also designed for low CPU overhead with DMA offloading of FIFO register accesses. Signed-off-by: Gao Pan <pandy.gao@nxp.com> Reviewed-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-22spi: spi-fsl-dspi: Fix continuous selection formatSanchayan Maity
Current DMA implementation was not handling the continuous selection format viz. SPI chip select would be deasserted even between sequential serial transfers. Use existing dspi_data_to_pushr function to restructure the transmit code path and set or reset the CONT bit on same lines as code path in EOQ mode does. This correctly implements continuous selection format while also correcting and cleaning up the transmit code path. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-22spi: spi-fsl-dspi: Fix incorrect DMA setupSanchayan Maity
Currently dmaengine_prep_slave_single was being called with length set to the complete DMA buffer size. This resulted in unwanted bytes being transferred to the SPI register leading to clock and MOSI lines having unwanted data even after chip select got deasserted and the required bytes having been transferred. While at it also clean up the use of curr_xfer_len which is central to the DMA setup, from bytes to DMA transfers for every use. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-22spi: spi-fsl-dspi: Fix incorrect freeing of DMA allocated buffersSanchayan Maity
Buffers allocated with a call to dma_alloc_coherent should be freed with dma_free_coherent instead of the currently used devm_kfree. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-22spi: use sg_next for walking through the allocated scatterlist tableJuan Gutierrez
A null dereference or Oops exception might occurs when reading at once the whole content of an spi-nor of big enough size that requires an scatterlist table that does not fit into one single page. The spi_map_buf function is ignoring the chained sg case by dereferenceing the scatterlist elements in an array fashion. This wrongly assumes that the allocation of the scatterlist elements are contiguous. This is true as long as the scatterlist table fits within a PAGE_SIZE. However, for allocation where the scatter table is bigger than that, the pages allocated by sg_alloc might not be contigous. The sg table can be properly walked by sg_next instead of using an array. Signed-off-by: Juan Gutierrez <juan.gutierrez@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-21spi: spi-topcliff-pch: Remove some dead codeChristophe JAILLET
Since commit 0d35773979b9 ("spi: spi-topcliff-pch: Remove deprecated create_singlethread_workqueue"), 'retval' is no more used in this function. So some now dead code can be removed. Also axe a debug message which looks useless now. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-21spi: sh-msiof: Add support for R-Car M3-WGeert Uytterhoeven
MSIOF in R-Car M3-W (r8a7796) is handled fine by the existing driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-18spi: spi-fsl-dspi: Fix SPI transfer issue when using multiple SPI_IOC_MESSAGESanchayan Maity
Current DMA implementation had a bug where the DMA transfer would exit the loop in dspi_transfer_one_message after the completion of a single transfer. This results in a multi message transfer submitted with SPI_IOC_MESSAGE to terminate incorrectly without an error. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-16spi: fsl-espi: set spi_master members min_speed_hz and max_speed_hzHeiner Kallweit
ESPI has a max and min supported SPI frequency, determined by the clock divider range. Set master->min_speed_hz/max_speed_hz to inform the SPI core about these limits. Then the SPI core handles cases where a transfer requests a frequency outside the supported range. So far the driver simply set the lowest supported frequency if the requested frequency was below the supported range. This is not necessarily an appropriate action as the device might not support frequencies greater than the requested one. With this patch the SPI core will reject transfers requesting a too low frequency. The check in fsl_espi_setup can be removed because the SPI core sets spi->max_speed_hz to master->max_speed_hz if it's not set already. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-16spi: fsl-espi: simplify of_fsl_espi_suspendHeiner Kallweit
Simplify of_fsl_espi_suspend a little. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-15spi: atmel: Fix scheduling while atomicBen Whitten
A call to clk_get_rate appears to be called in the context of an interrupt, cache the bus clock for the frequency calculations in transmission. This fixes a 'BUG: scheduling while atomic' and 'WARNING: CPU: 0 PID: 777 at kernel/sched/core.c:2960 atmel_spi_unlock' Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com> Signed-off-by: Steve deRosier <steve.derosier@lairdtech.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-15spi: spi-ti-qspi: reinit of completion variablePrahlad V
completion variable should be reinitialized before reusing. Signed-off-by: Prahlad V <prahlad.eee@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-14spi: atmel: fix indenting in atmel_spi_gpio_cs()Dan Carpenter
These lines were indented one extra tab. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-14spi: spi-pxa2xx: Remove unused macroJarkko Nikula
IS_DMA_ALIGNED() became unused by the commit 6356437e65c2 ("spi: spi-pxa2xx: remove legacy PXA DMA bits"). Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-14spi: fsl-espi: separate fsl-espi from fsl-lib completelyHeiner Kallweit
After having removed all code dependencies we can make fsl-espi completely independent of fsl-lib now. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-14spi: fsl-espi: introduce struct fsl_espiHeiner Kallweit
Only few members of struct mpc8xxx_spi are relevant for fsl-espi. Therefore replace it with a ESPI-specific struct fsl_espi. Replace variable names mpc8xxx_spi and mspi with espi. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 15:06:55 +0000