summaryrefslogtreecommitdiff
path: root/drivers/spi
AgeCommit message (Collapse)Author
2019-05-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: Among the larger pieces: - Power management improvements for TI am335x and am437x (RTC suspend/wake) - Misc new additions for Amlogic (socinfo updates) - ZynqMP FPGA manager - Nvidia improvements for reset/powergate handling - PMIC wrapper for Mediatek MT8516 - Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits) soc: aspeed: fix Kconfig soc: add aspeed folder and misc drivers spi: zynqmp: Fix build break soc: imx: Add generic i.MX8 SoC driver MAINTAINERS: Update email for Qualcomm SoC maintainer memory: tegra: Fix a typos for "fdcdwr2" mc client Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+" memory: tegra: Replace readl-writel with mc_readl-mc_writel memory: tegra: Fix integer overflow on tick value calculation memory: tegra: Fix missed registers values latching ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30 optee: allow to work without static shared memory soc/tegra: pmc: Move powergate initialisation to probe soc/tegra: pmc: Remove reset sysfs entries on error soc/tegra: pmc: Fix reset sources and levels soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask fpga manager: Adding FPGA Manager support for Xilinx zynqmp dt-bindings: fpga: Add bindings for ZynqMP fpga driver firmware: xilinx: Add fpga API's ...
2019-05-14include/: refactor headers to allow kthread.h inclusion in psi_types.hSuren Baghdasaryan
kthread.h can't be included in psi_types.h because it creates a circular inclusion with kthread.h eventually including psi_types.h and complaining on kthread structures not being defined because they are defined further in the kthread.h. Resolve this by removing psi_types.h inclusion from the headers included from kthread.h. Link: http://lkml.kernel.org/r/20190319235619.260832-7-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dennis Zhou <dennis@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Li Zefan <lizefan@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-09Merge tag 'dmaengine-5.2-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: - Updates to stm32 dma residue calculations - Interleave dma capability to axi-dmac and support for ZynqMP arch - Rework of channel assignment for rcar dma - Debugfs for pl330 driver - Support for Tegra186/Tegra194, refactoring for new chips and support for pause/resume - Updates to axi-dmac, bcm2835, fsl-edma, idma64, imx-sdma, rcar-dmac, stm32-dma etc - dev_get_drvdata() updates on few drivers * tag 'dmaengine-5.2-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (34 commits) dmaengine: tegra210-adma: restore channel status dmaengine: tegra210-dma: free dma controller in remove() dmaengine: tegra210-adma: add pause/resume support dmaengine: tegra210-adma: add support for Tegra186/Tegra194 Documentation: DT: Add compatibility binding for Tegra186 dmaengine: tegra210-adma: prepare for supporting newer Tegra chips dmaengine: at_xdmac: remove a stray bottom half unlock dmaengine: fsl-edma: Adjust indentation dmaengine: fsl-edma: Fix typo in Vybrid name dmaengine: stm32-dma: fix residue calculation in stm32-dma dmaengine: nbpfaxi: Use dev_get_drvdata() dmaengine: bcm-sba-raid: Use dev_get_drvdata() dmaengine: stm32-dma: Fix unsigned variable compared with zero dmaengine: stm32-dma: use platform_get_irq() dmaengine: rcar-dmac: Update copyright information dmaengine: imx-sdma: Only check ratio on parts that support 1:1 dmaengine: xgene-dma: fix spelling mistake "descripto" -> "descriptor" dmaengine: idma64: Move driver name to the header dmaengine: bcm2835: Drop duplicate capability setting. dmaengine: pl330: _stop: clear interrupt status ...
2019-05-07Merge tag 'staging-5.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / IIO driver updates from Greg KH: "Here is the big staging and iio driver update for 5.2-rc1. Lots of tiny fixes all over the staging and IIO driver trees here, along with some new IIO drivers. The "counter" subsystem was added in here as well, as it is needed by the IIO drivers and subsystem. Also we ended up deleting two drivers, making this pull request remove a few hundred thousand lines of code, always a nice thing to see. Both of the drivers removed have been replaced with "real" drivers in their various subsystem directories, and they will be coming to you from those locations during this merge window. There are some core vt/selection changes in here, that was due to some cleanups needed for the speakup fixes. Those have all been acked by the various subsystem maintainers (i.e. me), so those are ok. We also added a few new drivers, for some odd hardware, giving new developers plenty to work on with basic coding style cleanups to come in the near future. Other than that, nothing unusual here. All of these have been in linux-next for a while with no reported issues, other than an odd gcc warning for one of the new drivers that should be fixed up soon" [ I fixed up the warning myself - Linus ] * tag 'staging-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (663 commits) staging: kpc2000: kpc_spi: Fix build error for {read,write}q Staging: rtl8192e: Remove extra space before break statement Staging: rtl8192u: ieee80211: Fix if-else indentation warning Staging: rtl8192u: ieee80211: Fix indentation errors by removing extra spaces staging: most: cdev: fix chrdev_region leak in mod_exit staging: wlan-ng: Fix improper SPDX comment style staging: rtl8192u: ieee80211: Resolve ERROR reported by checkpatch staging: vc04_services: bcm2835-camera: Compress two lines into one line staging: rtl8723bs: core: Use !x in place of NULL comparison. staging: rtl8723bs: core: Prefer using the BIT Macro. staging: fieldbus: anybus-s: fix wait_for_completion_timeout return handling staging: kpc2000: fix up build problems with readq() staging: rtlwifi: move remaining phydm .h files staging: rtlwifi: strip down phydm .h files staging: rtlwifi: delete the staging driver staging: fieldbus: anybus-s: rename bus id field to avoid confusion staging: fieldbus: anybus-s: keep device bus id in bus endianness Staging: sm750fb: Change *array into *const array staging: rtl8192u: ieee80211: Fix spelling mistake staging: rtl8192u: ieee80211: Replace bit shifting with BIT macro ...
2019-05-07Merge tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linuxLinus Torvalds
Pull stream_open conversion from Kirill Smelkov: - remove unnecessary double nonseekable_open from drivers/char/dtlk.c as noticed by Pavel Machek while reviewing nonseekable_open -> stream_open mass conversion. - the mass conversion patch promised in commit 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock") and is automatically generated by running $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. More details on this in the patch. - finally, change VFS to pass ppos=NULL into .read/.write for files that declare themselves streams. It was suggested by Rasmus Villemoes and makes sure that if ppos starts to be erroneously used in a stream file, such bug won't go unnoticed and will produce an oops instead of creating illusion of position change being taken into account. Note: this patch does not conflict with "fuse: Add FOPEN_STREAM to use stream_open()" that will be hopefully coming via FUSE tree, because fs/fuse/ uses new-style .read_iter/.write_iter, and for these accessors position is still passed as non-pointer kiocb.ki_pos . * tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linux: vfs: pass ppos=NULL to .read()/.write() of FMODE_STREAM files *: convert stream-like files from nonseekable_open -> stream_open dtlk: remove double call to nonseekable_open
2019-05-07Merge tag 'spi-v5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "One small feature was added this release but the bulk of the diffstat and the changelog comes from the fact that several older drivers got some fairly hefty reworks and a couple of new drivers were added: - Support for detailed control of timing around chip selects from Sowjanya Komatineni. - A big set of fixes and imrovements for the Tegra114 driver from Sowjanya Komatineni. - A big simplification of the GPIO driver from Andrey Smirnov. - DMA support and fixes for the Freescale LPSPI driver from Clark Wang. - Fixes and optimizations for the bcm2835aux from Martin Sparl. - New drivers for Mediatek MT7621 (graduated from staging) and Zynq QSPI" [ This is a so-called "evil merge" that additionally removes a warning due to an unused variable 'i' introduced by commit 1dfbf334f123 ("spi: ep93xx: Convert to use CS GPIO descriptors") - Linus ] * tag 'spi-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (127 commits) spi: rspi: Fix handling of QSPI code when transmit and receive spi: atmel-quadspi: fix crash while suspending spi: stm32: return the get_irq error spi: tegra114: fix PIO transfer spi: pxa2xx: fix SCR (divisor) calculation spi: Clear SPI_CS_HIGH flag from bad_bits for GPIO chip-select spi: ep93xx: Convert to use CS GPIO descriptors spi: AD ASoC: declare missing of table spi: spi-mem: zynq-qspi: Fix build error on architectures missing readsl/writesl spi: stm32-qspi: manage the get_irq error case spi/spi-bcm2835: Split transfers that exceed DLEN spi: expand mode support dt-bindings: spi: spi-mt65xx: add support for MT8516 spi: pxa2xx: Add support for Intel Comet Lake spi/trace: Cap buffer contents at 64 bytes spi: Release spi_res after finalizing message spi: Remove warning in spi_split_transfers_maxsize() spi: Remove one needless transfer speed fall back case spi: sh-msiof: Document r8a77470 bindings spi: pxa2xx: use a module softdep for dw_dmac ...
2019-05-06*: convert stream-like files from nonseekable_open -> stream_openKirill Smelkov
Using scripts/coccinelle/api/stream_open.cocci added in 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock"), search and convert to stream_open all in-kernel nonseekable_open users for which read and write actually do not depend on ppos and where there is no other methods in file_operations which assume @offset access. I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. The script also does not convert files that should be valid to convert, but that currently have .llseek = noop_llseek or generic_file_llseek for unknown reason despite file being opened with nonseekable_open (e.g. drivers/input/mousedev.c) Among cases converted 14 were potentially vulnerable to read vs write deadlock (see details in 10dce8af3422): drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/infiniband/core/user_mad.c:988:1-17: ERROR: umad_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/misc/uinput.c:401:1-17: ERROR: uinput_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. and the rest were just safe to convert to stream_open because their read and write do not use ppos at all and corresponding file_operations do not have methods that assume @offset file access(*): arch/powerpc/platforms/52xx/mpc52xx_gpt.c:631:8-24: WARNING: mpc52xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/um/drivers/harddog_kern.c:88:8-24: WARNING: harddog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/x86/kernel/cpu/microcode/core.c:430:33-49: WARNING: microcode_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ds1620.c:215:8-24: WARNING: ds1620_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/dtlk.c:301:1-17: WARNING: dtlk_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ipmi/ipmi_watchdog.c:840:9-25: WARNING: ipmi_wdog_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/pcmcia/scr24x_cs.c:95:8-24: WARNING: scr24x_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/tb0219.c:246:9-25: WARNING: tb0219_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/firewire/nosy.c:306:8-24: WARNING: nosy_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/fschmd.c:840:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/w83793.c:1344:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucma.c:1747:8-24: WARNING: ucma_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucm.c:1178:8-24: WARNING: ucm_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/uverbs_main.c:1086:8-24: WARNING: uverbs_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/input/joydev.c:282:1-17: WARNING: joydev_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/pci/switch/switchtec.c:393:1-17: WARNING: switchtec_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/platform/chrome/cros_ec_debugfs.c:135:8-24: WARNING: cros_ec_console_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-ds1374.c:470:9-25: WARNING: ds1374_wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-m41t80.c:805:9-25: WARNING: wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/tape_char.c:293:2-18: WARNING: tape_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/zcore.c:194:8-24: WARNING: zcore_reipl_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/crypto/zcrypt_api.c:528:8-24: WARNING: zcrypt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/spi/spidev.c:594:1-17: WARNING: spidev_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/staging/pi433/pi433_if.c:974:1-17: WARNING: pi433_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/acquirewdt.c:203:8-24: WARNING: acq_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/advantechwdt.c:202:8-24: WARNING: advwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim1535_wdt.c:252:8-24: WARNING: ali_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim7101_wdt.c:217:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ar7_wdt.c:166:8-24: WARNING: ar7_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/at91rm9200_wdt.c:113:8-24: WARNING: at91wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ath79_wdt.c:135:8-24: WARNING: ath79_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/bcm63xx_wdt.c:119:8-24: WARNING: bcm63xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpu5wdt.c:143:8-24: WARNING: cpu5wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpwd.c:397:8-24: WARNING: cpwd_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/eurotechwdt.c:319:8-24: WARNING: eurwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/f71808e_wdt.c:528:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/gef_wdt.c:232:8-24: WARNING: gef_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/geodewdt.c:95:8-24: WARNING: geodewdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ib700wdt.c:241:8-24: WARNING: ibwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ibmasr.c:326:8-24: WARNING: asr_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/indydog.c:80:8-24: WARNING: indydog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/intel_scu_watchdog.c:307:8-24: WARNING: intel_scu_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/iop_wdt.c:104:8-24: WARNING: iop_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/it8712f_wdt.c:330:8-24: WARNING: it8712f_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ixp4xx_wdt.c:68:8-24: WARNING: ixp4xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ks8695_wdt.c:145:8-24: WARNING: ks8695wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/m54xx_wdt.c:88:8-24: WARNING: m54xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/machzwd.c:336:8-24: WARNING: zf_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mixcomwd.c:153:8-24: WARNING: mixcomwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mtx-1_wdt.c:121:8-24: WARNING: mtx1_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mv64x60_wdt.c:136:8-24: WARNING: mv64x60_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nuc900_wdt.c:134:8-24: WARNING: nuc900wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nv_tco.c:164:8-24: WARNING: nv_tco_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pc87413_wdt.c:289:8-24: WARNING: pc87413_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:698:8-24: WARNING: pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:737:8-24: WARNING: pcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:581:8-24: WARNING: pcipcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:623:8-24: WARNING: pcipcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:488:8-24: WARNING: usb_pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:527:8-24: WARNING: usb_pcwd_temperature_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pika_wdt.c:121:8-24: WARNING: pikawdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pnx833x_wdt.c:119:8-24: WARNING: pnx833x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rc32434_wdt.c:153:8-24: WARNING: rc32434_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rdc321x_wdt.c:145:8-24: WARNING: rdc321x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/riowd.c:79:1-17: WARNING: riowd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sa1100_wdt.c:62:8-24: WARNING: sa1100dog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc60xxwdt.c:211:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc7240_wdt.c:139:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc8360.c:274:8-24: WARNING: sbc8360_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_epx_c3.c:81:8-24: WARNING: epx_c3_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_fitpc2_wdt.c:78:8-24: WARNING: fitpc2_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sb_wdog.c:108:1-17: WARNING: sbwdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc1200wdt.c:181:8-24: WARNING: sc1200wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc520_wdt.c:261:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sch311x_wdt.c:319:8-24: WARNING: sch311x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/scx200_wdt.c:105:8-24: WARNING: scx200_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/smsc37b787_wdt.c:369:8-24: WARNING: wb_smsc_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83877f_wdt.c:227:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83977f_wdt.c:301:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wafer5823wdt.c:200:8-24: WARNING: wafwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/watchdog_dev.c:828:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:379:8-24: WARNING: wdrtas_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:445:8-24: WARNING: wdrtas_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt285.c:104:1-17: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt977.c:276:8-24: WARNING: wdt977_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:424:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:484:8-24: WARNING: wdt_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:464:8-24: WARNING: wdtpci_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:527:8-24: WARNING: wdtpci_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. net/batman-adv/log.c:105:1-17: WARNING: batadv_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/control.c:57:7-23: WARNING: snd_ctl_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/rawmidi.c:385:7-23: WARNING: snd_rawmidi_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/seq/seq_clientmgr.c:310:7-23: WARNING: snd_seq_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/timer.c:1428:7-23: WARNING: snd_timer_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. One can also recheck/review the patch via generating it with explanation comments included via $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci SPFLAGS="-D explain" (*) This second group also contains cases with read/write deadlocks that stream_open.cocci don't yet detect, but which are still valid to convert to stream_open since ppos is not used. For example drivers/pci/switch/switchtec.c calls wait_for_completion_interruptible() in its .read, but stream_open.cocci currently detects only "wait_event*" as blocking. Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yongzhi Pan <panyongzhi@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Tejun Heo <tj@kernel.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Nikolaus Rath <Nikolaus@rath.org> Cc: Han-Wen Nienhuys <hanwen@google.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James R. Van Zandt" <jrv@vanzandt.mv.com> Cc: Corey Minyard <minyard@acm.org> Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Lubomir Rintel <lkundrak@v3.sk> [scr24x_cs] Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Johan Hovold <johan@kernel.org> Cc: David Herrmann <dh.herrmann@googlemail.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Jean Delvare <jdelvare@suse.com> Acked-by: Guenter Roeck <linux@roeck-us.net> [watchdog/* hwmon/*] Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> [drivers/pci/switch/switchtec] Acked-by: Bjorn Helgaas <bhelgaas@google.com> [drivers/pci/switch/switchtec] Cc: Benson Leung <bleung@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> [platform/chrome] Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [rtc/*] Cc: Mark Brown <broonie@kernel.org> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Zwane Mwaikambo <zwanem@gmail.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: "David S. Miller" <davem@davemloft.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
2019-05-02Merge branch 'spi-5.2' into spi-nextMark Brown
2019-05-02Merge branch 'spi-5.1' into spi-linusMark Brown
2019-05-02spi: rspi: Fix handling of QSPI code when transmit and receiveHoan Nguyen An
Process handling QSPI when transmit/receive at qspi_trigger_transfer_out_in() as follows: Setting the trigger, is the number of bytes in the FIFO buffer to determine when there is an interrupt. Then check if the value of triggering number is 32-bytes or 1-byte, there will be corresponding processing Handling (if (n == QSPI_BUFFER_SIZE) esle) this is unnecessary, leads to the same processing of data transmission or reception, The difference here are with ret = rspi_wait_for_tx_empty(rspi); ret = rspi_wait_for_rx_full(rspi); When the nummber trigger is 32 bytes, we only write into FIFO when the FIFO is completely empty (interrupt transmission), and only receive if FIFO is full of 32 bytes of data. In the case of a nummber trigger that is 1 byte, in principle we still need to process rspi_wait_for_tx_empty/full so that FIFO is empty only with the amount of data we need to write to or equal to the number of bytes we need to receive, There is currently no processing of this. And in the current case with this patch, at this time it only needs at least 1 byte received in FIFO that has interrupt received, or FIFO at least 1bytes free can be written into FIFO, This patch therefore does not affect this processing. So we need to eliminate unnecessary waste processing (if (n == QSPI_BUFFER_SIZE) esle), more precisely in waiting for FIFO status. The same with handling in qspi_transfer_out()/qspi_transfer_in(). Signed-off-by: Hoan Nguyen An <na-hoan@jinso.co.jp> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-02spi: atmel-quadspi: fix crash while suspendingClaudiu Beznea
atmel_qspi objects are kept in spi_controller objects, so, first get pointer to spi_controller object and then get atmel_qspi object from spi_controller object. Fixes: 2d30ac5ed633 ("mtd: spi-nor: atmel-quadspi: Use spi-mem interface for atmel-quadspi driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-02spi: stm32: return the get_irq errorFabien Dessenne
During probe, return the "get_irq" error value instead of -ENOENT. This allows the driver to be defer probed if needed. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-02spi: tegra114: fix PIO transferSowjanya Komatineni
This patch fixes PIO mode transfer to use PIO bit in SPI_COMMAND1 register. Current driver uses DMA_EN instead of PIO bit. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-02spi: pxa2xx: fix SCR (divisor) calculationFlavio Suligoi
Calculate the divisor for the SCR (Serial Clock Rate), avoiding that the SSP transmission rate can be greater than the device rate. When the division between the SSP clock and the device rate generates a reminder, we have to increment by one the divisor. In this way the resulting SSP clock will never be greater than the device SPI max frequency. For example, with: - ssp_clk = 50 MHz - dev freq = 15 MHz without this patch the SSP clock will be greater than 15 MHz: - 25 MHz for PXA25x_SSP and CE4100_SSP - 16,56 MHz for the others Instead, with this patch, we have in both case an SSP clock of 12.5MHz, so the max rate of the SPI device clock is respected. Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-02spi: Clear SPI_CS_HIGH flag from bad_bits for GPIO chip-selectSerge Semin
When GPIO chip-select is used nothing prevents any available SPI controllers to work with both CS-high and traditional CS-low modes. In fact the SPI bus core code already does it, so we don't need to introduce any modification there. But spi_setup() still fails to switch the interface settings if CS-high flag is set for the case of GPIO-driven slave chip-select when the SPI controller doesn't support the hardwired CS-inversion. Lets fix it by clearing the SPI_CS_HIGH flag out from bad_bits (unsupported by controller) when client chip is selected by GPIO. This feature is useful for slave devices, which in accordance with communication protocol can work with both active-high and active-low chip-selects. I am aware of one such device. It is MMC-SPI interface, when at init sequence the driver needs to perform a read operation with low and high chip-select sequentially (requirement of 74 clock cycles with both chipselect, see the mmc_spi driver for details). Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-02spi: ep93xx: Convert to use CS GPIO descriptorsLinus Walleij
This converts the EP93xx SPI master driver to use GPIO descriptors for chip select handling. EP93xx was using platform data to pass in GPIO lines, by converting all board files to use GPIO descriptor tables the core will look up the GPIO lines from the SPI device in the same manner as for device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-02spi: spi-mem: zynq-qspi: Fix build error on architectures missing readsl/writeslNaga Sureshkumar Relli
Alpha and some of the architectures are missing readsl/writesl functions. so the zynq-qspi driver won't be able to build on these arches. hence use ioread32_rep()/iowrite32_rep() instead of readsl()/writesl(). Signed-off-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-02spi: stm32-qspi: manage the get_irq error caseFabien Dessenne
During probe, check the "get_irq" error value. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-02spi/spi-bcm2835: Split transfers that exceed DLENMeghana Madhyastha
Split spi transfers into chunks of <=65532 to enable the driver to perform DMA transfer on big buffers. The DLEN register specifies the number of bytes to transfer in DMA mode. It is 16-bit wide and thus the maximum DMA transfer is 65535 bytes. Set the maximum to 65532 (4 byte aligned) since the FIFO in DMA mode is accessed in 4 byte chunks. ->max_dma_len is the value the spi core uses when splitting the buffer into scatter gather entries. The BCM2835 DMA block has 2 types of channels/engines: - Normal: Max length: 1G - Lite: Max length: 65535 Even when using a Lite channel we will not exceed the max length, so let's drop setting ->max_dma_len. Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-02spi: pxa2xx: Add support for Intel Comet LakeEvan Green
Add PCI IDs for SPI on Comet Lake. Signed-off-by: Evan Green <evgreen@chromium.org> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-02spi: Release spi_res after finalizing messageNoralf Trønnes
spi_split_transfers_maxsize() can be used to split a transfer. This function uses spi_res to lifetime manage the added transfer structures. So in order to finalize the current message while it contains the split transfers, spi_res_release() must be called after finalizing. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-02spi: Remove warning in spi_split_transfers_maxsize()Noralf Trønnes
Don't warn about splitting transfers, the info is available in the statistics if needed. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-02spi: Remove one needless transfer speed fall back caseJarkko Nikula
Falling back to maximum speed of the controller in case of SPI slave maximum speed is not set is needless. It already defaults to maximum speed of the controller since commit 052eb2d49006 ("spi: core: Set max_speed_hz of spi_device default to max_speed_hz of controller"). Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-02spi: pxa2xx: use a module softdep for dw_dmacFlavio Suligoi
With dw_dmac, sometimes the request of a DMA channel fails because the DMA driver is not ready, so an explicit dependency request is necessary. Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-29spi: zynqmp: Fix build breakOlof Johansson
Missing include: drivers/spi/spi-zynqmp-gqspi.c:1025:13: error: implicit declaration of function 'zynqmp_pm_get_eemi_ops'; did you mean 'zynqmp_process_dma_irq'? [-Werror=implicit-function-declaration] Fixes: 3d0313786470a ('drivers: Defer probe if firmware is not ready') Cc: Rajan Vaja <rajan.vaja@xilinx.com> Cc: Jolly Shah <jollys@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-08spi: add a method for configuring CS timingSowjanya Komatineni
This patch creates set_cs_timing SPI master optional method for SPI masters to implement configuring CS timing if applicable. This patch also creates spi_cs_timing accessory for SPI clients to use for requesting SPI master controllers to configure device requested CS setup time, hold time and inactive delay. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-08spi: tegra114: add support for interrupt maskSowjanya Komatineni
This patch creates tegra_spi_soc_data structure to maintain and implement SPI HW feature differences between different Tegra chips and also creates a separate compatible string for T124/T210. Tegra210 and later has a separate interrupt mask register SPI_INTR_MASK for enabling or disabling interrupts while Tegra124 and prior uses interrupt enable bits in SPI_DMA_CTL register. This patch creates flag has_intr_mask_reg in tegra_spi_soc_data to identify this and implements accordingly. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-08spi: tegra114: add 3 wire transfer mode supportSowjanya Komatineni
This patch adds 3 wire transfer support to SPI mode list along with its implementation. 3 wire or Bi-directional mode uses only one serial data pin for the transfer. SPI in master mode uses MOSI data line only and MISO data line is not used. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-08spi: tegra114: add dual mode supportSowjanya Komatineni
This patch adds support for dual mode SPI transfer. Dual mode uses both MOSI and MISO lines in parallel where the data is interleaved on MOSI and MISO lines increasing the throughput. Packet from Tx FIFO is transmitted on both MOSI and MISO lines and packet to Rx FIFO is received from both MOSI and MISO lines. Even bits are transmitted or received on the MOSI data line and odd bits are transmitted or received on the MISO data line. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-08spi: gpio: Use devm_spi_register_master()Andrey Smirnov
Replace spi_bitbang_start() with a combination of spi_bitbang_init() and devm_spi_register_master() and drop all of the explicit cleanup-related code that's no longer necessary. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-spi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-08spi: bitbang: Introduce spi_bitbang_init()Andrey Smirnov
Move all of the code doing struct spi_bitbang initialization, so that it can be paired with devm_spi_register_master() in order to avoid having to call spi_bitbang_stop() explicitly. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-spi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-08spi: gpio: Make sure spi_master_put() is called in every error pathAndrey Smirnov
There's a number of failure paths in spi_gpio_probe() that do not call spi_master_put() potentially leaking memory. Fix this problem by registering a cleanup funciont via devm_add_action_or_reset() right after SPI controller is allocated. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-spi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-08spi: pxa2xxx: change "no DMA channels..." msg from debug to warningFlavio Suligoi
Change the type of the diagnostic message: "no DMA channels available, using PIO" from debug to warning. The lack of an available DMA channel is very important regard the spi-pxa2xx performance. The transfer speed can be reduced more than 50%. So it is very important to warn the user about this, without enabling the full SPI debug with CONFIG_SPI_DEBUG. Moreover, enabling the full SPI debug only to enable this specific debug message, the dmesg buffer fills quickly with a lot of repetitive information during the SPI data transfer. This cause the loss of all the first important messages written during the initialization. Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-08spi: fsl-lpspi: Clean up fsl_lpspi_probeAxel Lin
Use is_slave local variable to avoid calling of_property_read_bool() twice. Remove redudant assignment for controller->bus_num, set it once is enough. Move setting controller->bits_per_word_mask close to the code init other controller fields. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-08spi: fsl-lpspi: Fix build warning when !CONFIG_PMAxel Lin
Add #ifdef CONFIG_PM guard to fix build warning when !CONFIG_PM drivers/spi/spi-fsl-lpspi.c:810:12: warning: ‘fsl_lpspi_runtime_suspend’ defined but not used [-Wunused-function] static int fsl_lpspi_runtime_suspend(struct device *dev) ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/spi/spi-fsl-lpspi.c:789:12: warning: ‘fsl_lpspi_runtime_resume’ defined but not used [-Wunused-function] static int fsl_lpspi_runtime_resume(struct device *dev) ^~~~~~~~~~~~~~~~~~~~~~~~ Fixes: 944c01a889d9 ("spi: lpspi: enable runtime pm for lpspi") Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-08spi: fsl-lpspi: Fix problematic dev_set_drvdata callAxel Lin
The original code already set controller as drvdata: platform_set_drvdata(pdev, controller); But commit 944c01a889d9 ("spi: lpspi: enable runtime pm for lpspi") added dev_set_drvdata(&pdev->dev, fsl_lpspi); so fsl_lpspi_remove() will get wrong pointer by platform_get_drvdata(). Fixes: 944c01a889d9 ("spi: lpspi: enable runtime pm for lpspi") Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-08spi-mem: fix kernel-doc for spi_mem_dirmap_{read|write}()Sergei Shtylyov
The function names in the kernel-doc comments were mistyped, with a word "dirmap" being repeated twice, so fix them. Fixes: aa167f3fed0c ("spi: spi-mem: Add a new API to support direct mapping") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-08spi: bcm2835aux: Fix build error without CONFIG_DEBUG_FSYueHaibing
When building CONFIG_DEBUG_FS is not set gcc warn this: drivers/spi/spi-bcm2835aux.c: In function bcm2835aux_spi_probe: drivers/spi/spi-bcm2835aux.c:591:2: error: too many arguments to function bcm2835aux_debugfs_create bcm2835aux_debugfs_create(bs, dev_name(&pdev->dev)); ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/spi/spi-bcm2835aux.c:145:13: note: declared here static void bcm2835aux_debugfs_create(struct bcm2835aux_spi *bs) Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 8048d151eb4d ("spi: bcm2835aux: add driver stats to debugfs") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-08spi: kill useless initializer in spi_register_controller()Sergei Shtylyov
The 'status' local variable is initialized but this value is never used, thus kill that initializer. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-05spi: spi-mem: Add support for Zynq QSPI controllerNaga Sureshkumar Relli
Add support for QSPI controller driver used by Xilinx Zynq SOC. Signed-off-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-05spi: gpio: Drop unused pdev field in struct spi_gpioAndrey Smirnov
There's no code using 'pdev' field in struct spi_gpio. Drop it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-spi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-05spi: gpio: Drop mflags argument from spi_gpio_request()Andrey Smirnov
The logic of setting mflags in spi_gpio_request() is very simple and there isn't much benefit in having it in that function. Move all of that code outside into spi_gpio_probe() in order to simplify things. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-spi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-05spi: Don't call spi_get_gpio_descs() before device name is setAndrey Smirnov
Move code calling spi_get_gpio_descs() to happen after ctlr->dev's name is set in order to have proper GPIO consumer names. Before: cat /sys/kernel/debug/gpio gpiochip0: GPIOs 0-31, parent: platform/40049000.gpio, vf610-gpio: gpio-6 ( |regulator-usb0-vbus ) out lo gpiochip1: GPIOs 32-63, parent: platform/4004a000.gpio, vf610-gpio: gpio-36 ( |scl ) in hi gpio-37 ( |sda ) in hi gpio-40 ( |(null) CS1 ) out lo gpio-41 ( |(null) CS0 ) out lo ACTIVE LOW gpio-42 ( |miso ) in hi gpio-43 ( |mosi ) in lo gpio-44 ( |sck ) out lo After: cat /sys/kernel/debug/gpio gpiochip0: GPIOs 0-31, parent: platform/40049000.gpio, vf610-gpio: gpio-6 ( |regulator-usb0-vbus ) out lo gpiochip1: GPIOs 32-63, parent: platform/4004a000.gpio, vf610-gpio: gpio-36 ( |scl ) in hi gpio-37 ( |sda ) in hi gpio-40 ( |spi0 CS1 ) out lo gpio-41 ( |spi0 CS0 ) out lo ACTIVE LOW gpio-42 ( |miso ) in hi gpio-43 ( |mosi ) in lo gpio-44 ( |sck ) out lo Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-spi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-05spi: gpio: Don't request CS GPIO in DT use-caseAndrey Smirnov
DT use-case already relies on SPI core to control CS (requested by of_spi_register_master() and controlled spi_set_cs()), so there's no need to try to request those GPIO in spi-gpio code. Change the code such that spi-gpio's CS related code is only used if device is probed via pdata. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-spi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-05spi: tegra114: set bus number based on idSowjanya Komatineni
This patch sets SPI device id from the device tree as the bus number. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-05spi: tegra114: use unpacked mode for below 4 bytesSowjanya Komatineni
Packed mode expects minimum transfer length of 4 bytes. This patch fixes this by using unpacked mode for transfers less than 4 bytes. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-05spi: tegra114: set supported bits per wordSowjanya Komatineni
Tegra SPI supports 4 through 32 bits per word. This patch sets bits_per_word_mask accordingly to support transfer with these bits per word. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-05spi: tegra114: dump SPI registers during timeoutSowjanya Komatineni
This patch dumps SPI registers on transfer error or timeout for debug purpose. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-05Merge branch 'spi-5.1' into spi-5.2Mark Brown
2019-04-05spi: tegra114: avoid reset call in atomic contextSowjanya Komatineni
This patch moves SPI controller reset out of spin lock. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 12:20:57 +0000