summaryrefslogtreecommitdiff
path: root/drivers/spi
AgeCommit message (Collapse)Author
2020-06-07Merge tag 'char-misc-5.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc driver patches for 5.8-rc1 Included in here are: - habanalabs driver updates, loads - mhi bus driver updates - extcon driver updates - clk driver updates (approved by the clock maintainer) - firmware driver updates - fpga driver updates - gnss driver updates - coresight driver updates - interconnect driver updates - parport driver updates (it's still alive!) - nvmem driver updates - soundwire driver updates - visorbus driver updates - w1 driver updates - various misc driver updates In short, loads of different driver subsystem updates along with the drivers as well. All have been in linux-next for a while with no reported issues" * tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits) habanalabs: correctly cast u64 to void* habanalabs: initialize variable to default value extcon: arizona: Fix runtime PM imbalance on error extcon: max14577: Add proper dt-compatible strings extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()' extcon: remove redundant assignment to variable idx w1: omap-hdq: print dev_err if irq flags are not cleared w1: omap-hdq: fix interrupt handling which did show spurious timeouts w1: omap-hdq: fix return value to be -1 if there is a timeout w1: omap-hdq: cleanup to add missing newline for some dev_dbg /dev/mem: Revoke mappings when a driver claims the region misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages() misc: xilinx-sdfec: cleanup return value in xsdfec_table_write() misc: xilinx-sdfec: improve get_user_pages_fast() error handling nvmem: qfprom: remove incorrect write support habanalabs: handle MMU cache invalidation timeout habanalabs: don't allow hard reset with open processes habanalabs: GAUDI does not support soft-reset habanalabs: add print for soft reset due to event habanalabs: improve MMU cache invalidation code ...
2020-05-30Merge remote-tracking branch 'spi/for-5.8' into spi-nextMark Brown
2020-05-30Merge remote-tracking branch 'spi/for-5.7' into spi-linusMark Brown
2020-05-29spi: spi-fsl-dspi: fix native data copyAngelo Dureghello
ColdFire is a big-endian cpu with a big-endian dspi hw module, so, it uses native access, but memcpy breaks the endianness. So, if i understand properly, by native copy we would mean be(cpu)->be(dspi) or le(cpu)->le(dspi) accesses, so my fix shouldn't break anything, but i couldn't test it on LS family, so every test is really appreciated. Fixes: 53fadb4d90c7 ("spi: spi-fsl-dspi: Simplify bytes_per_word gymnastics") Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20200529195756.184677-1-angelo.dureghello@timesys.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Refactor mid_spi_dma_setup() to separate DMA and IRQ configAndy Shevchenko
It's better to understand what bits are set for DMA and for IRQ handling in mid_spi_dma_setup() if they are grouped accordingly. Thus, refactor mid_spi_dma_setup() to separate DMA and IRQ configuration. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200529183150.44149-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Make DMA request line assignments explicit for Intel MedfieldAndy Shevchenko
The 2afccbd283ae ("spi: dw: Discard static DW DMA slave structures") did a clean up of global variables, which is fine, but messed up with the carefully provided information in the custom DMA slave structures. There reader can find an assignment of the DMA request lines in use. Partially revert the above mentioned commit to restore readability and maintainability of the code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200529183150.44149-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: bcm2835: Remove shared interrupt supportMark Brown
This reverts commit ecfbd3cf3b8b since Lukas Wunner noticed that we start operating on the hardware before we check to see if this is a spurious interrupt. Reported-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29Merge series "spi: dw: Add generic DW DMA controller support" from Serge ↵Mark Brown
Semin <Sergey.Semin@baikalelectronics.ru>: Baikal-T1 SoC provides a DW DMA controller to perform low-speed peripherals Mem-to-Dev and Dev-to-Mem transaction. This is also applicable to the DW APB SSI devices embedded into the SoC. Currently the DMA-based transfers are supported by the DW APB SPI driver only as a middle layer code for Intel MID/Elkhart PCI devices. Seeing the same code can be used for normal platform DMAC device we introduced a set of patches to fix it within this series. First of all we need to add the Tx and Rx DMA channels support into the DW APB SSI binding. Then there are several fixes and cleanups provided as a initial preparation for the Generic DMA support integration: add Tx/Rx finish wait methods, clear DMAC register when done or stopped, Fix native CS being unset, enable interrupts in accordance with DMA xfer mode, discard static DW DMA slave structures, discard unused void priv pointer and dma_width member of the dw_spi structure, provide the DMA Tx/Rx burst length parametrisation and make sure it's optionally set in accordance with the DMA max-burst capability. In order to have the DW APB SSI MMIO driver working with DMA we need to initialize the paddr field with the physical base address of the DW APB SSI registers space. Then we unpin the Intel MID specific code from the generic DMA one and placed it into the spi-dw-pci.c driver, which is a better place for it anyway. After that the naming cleanups are performed since the code is going to be used for a generic DMAC device. Finally the Generic DMA initialization can be added to the generic version of the DW APB SSI IP. Last but not least we traditionally convert the legacy plain text-based dt-binding file with yaml-based one and as a cherry on a cake replace the manually written DebugFS registers read method with a ready-to-use for the same purpose regset32 DebugFS interface usage. This patchset is rebased and tested on the spi/for-next (5.7-rc5): base-commit: fe9fce6b2cf3 ("Merge remote-tracking branch 'spi/for-5.8' into spi-next") Link: https://lore.kernel.org/linux-spi/20200508132943.9826-1-Sergey.Semin@baikalelectronics.ru/ Changelog v2: - Rebase on top of the spi repository for-next branch. - Move bindings conversion patch to the tail of the series. - Move fixes to the head of the series. - Apply as many changes as possible to be applied the Generic DMA functionality support is added and the spi-dw-mid is moved to the spi-dw-dma driver. - Discard patch "spi: dw: Fix dma_slave_config used partly uninitialized" since the problem has already been fixed. - Add new patch "spi: dw: Discard unused void priv pointer". - Add new patch "spi: dw: Discard dma_width member of the dw_spi structure". n_bytes member of the DW SPI data can be used instead. - Build the DMA functionality into the DW APB SSI core if required instead of creating a separate kernel module. - Use conditional statement instead of the ternary operator in the ref clock getter. Link: https://lore.kernel.org/linux-spi/20200515104758.6934-1-Sergey.Semin@baikalelectronics.ru/ Changelog v3: - Use spi_delay_exec() method to wait for the DMA operation completion. - Explicitly initialize the dw_dma_slave members on stack. - Discard the dws->fifo_len utilization in the Tx FIFO DMA threshold setting from the patch where we just add the default burst length constants. - Use min() method to calculate the optimal burst values. - Add new patch which moves the spi-dw.c source file to spi-dw-core.c in order to preserve the DW APB SSI core driver name. - Add commas in the debugfs_reg32 structure initializer and after the last entry of the dw_spi_dbgfs_regs array. Link: https://lore.kernel.org/linux-spi/20200521012206.14472-1-Sergey.Semin@baikalelectronics.ru Changelog v4: - Get back ndelay() method to wait for an SPI transfer completion. spi_delay_exec() isn't suitable for the atomic context. Link: https://lore.kernel.org/linux-spi/20200522000806.7381-1-Sergey.Semin@baikalelectronics.ru Changelog v5: - Refactor the Tx/Rx DMA-based SPI transfers wait methods. - Add a new patch "spi: dw: Set xfer effective_speed_hz". - Add a new patch "spi: dw: Return any value retrieved from the dma_transfer callback" as a preparation patch before implementing the local DMA, Tx SPI and Rx SPI transfers wait methods. - Add a new patch "spi: dw: Locally wait for the DMA transactions completion", which provides a local DMA transaction complete method - Create a dedicated patch which adds the Rx-done wait method: "spi: dw: Add SPI Rx-done wait method to DMA-based transfer". - Add more detailed description of the problems the Tx/Rx-wait methods-related patches fix. - Wait for the SPI Tx and Rx transfers being finished in the mid_spi_dma_transfer() method executed in the task context. - Use spi_delay_exec() to wait for the SPI Tx/Rx completion, since now the driver calls the wait methods in the kernel thread context. - Use SPI_DELAY_UNIT_SCK spi_delay unit for Tx-wait delay, since SPI xfer's are now have the effective_speed_hz initialized. - Rx-wait for a delay correlated with the APB/SSI synchronous clock rate instead of using the SPI bus clock rate. Link: https://lore.kernel.org/linux-spi/20200529035915.20790-1-Sergey.Semin@baikalelectronics.ru Changelog v6: - Provide a more detailed description of the patch: 2901db35bea1 ("spi: dw: Locally wait for the DMA transfers completion") - Calculate the Rx delay with better accuracy by moving 4-multiplication to the head of the formulae: ns = 4U * NSEC_PER_SEC / dws->max_freq * nents. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Maxim Kaurkin <Maxim.Kaurkin@baikalelectronics.ru> Cc: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru> Cc: Ekaterina Skachko <Ekaterina.Skachko@baikalelectronics.ru> Cc: Vadim Vlasov <V.Vlasov@baikalelectronics.ru> Cc: Alexey Kolotnikov <Alexey.Kolotnikov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-spi@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Serge Semin (16): spi: dw: Set xfer effective_speed_hz spi: dw: Return any value retrieved from the dma_transfer callback spi: dw: Locally wait for the DMA transfers completion spi: dw: Add SPI Tx-done wait method to DMA-based transfer spi: dw: Add SPI Rx-done wait method to DMA-based transfer spi: dw: Parameterize the DMA Rx/Tx burst length spi: dw: Use DMA max burst to set the request thresholds spi: dw: Fix Rx-only DMA transfers spi: dw: Add core suffix to the DW APB SSI core source file spi: dw: Move Non-DMA code to the DW PCIe-SPI driver spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core spi: dw: Cleanup generic DW DMA code namings spi: dw: Add DMA support to the DW SPI MMIO driver spi: dw: Use regset32 DebugFS method to create regdump file dt-bindings: spi: Convert DW SPI binding to DT schema .../bindings/spi/snps,dw-apb-ssi.txt | 44 -- .../bindings/spi/snps,dw-apb-ssi.yaml | 127 +++++ .../devicetree/bindings/spi/spi-dw.txt | 24 - drivers/spi/Kconfig | 15 +- drivers/spi/Makefile | 5 +- drivers/spi/{spi-dw.c => spi-dw-core.c} | 95 ++-- drivers/spi/spi-dw-dma.c | 482 ++++++++++++++++++ drivers/spi/spi-dw-mid.c | 382 -------------- drivers/spi/spi-dw-mmio.c | 4 + drivers/spi/spi-dw-pci.c | 50 +- drivers/spi/spi-dw.h | 20 +- 11 files changed, 719 insertions(+), 529 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt create mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml delete mode 100644 Documentation/devicetree/bindings/spi/spi-dw.txt rename drivers/spi/{spi-dw.c => spi-dw-core.c} (82%) create mode 100644 drivers/spi/spi-dw-dma.c delete mode 100644 drivers/spi/spi-dw-mid.c -- 2.26.2
2020-05-29spi: dw: add reset controlDinh Nguyen
Add mechanism to get the reset control and deassert it in order to bring the IP out of reset. Signed-off-by: Liang Jin J <liang.j.jin@ericsson.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20200529155806.16758-1-dinguyen@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: bcm2835: Enable shared interrupt supportMartin Sperl
bcm2711, Rasberry Pi 4's SoC, shares one interrupt for multiple instances of the bcm2835 SPI controller. So this enables shared interrupt support for them. The early bail out in the interrupt routine avoids messing with buffers of transfers being done by other means. Otherwise, the driver can handle receiving interrupts asserted by other controllers during an IRQ based transfer. Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20200528185805.28991-1-nsaenzjulienne@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: bcm2835: Implement shutdown callbackFlorian Fainelli
Make sure we clear the FIFOs, stop the block, disable the clock and release the DMA channel. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20200528190605.24850-1-f.fainelli@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Use regset32 DebugFS method to create regdump fileSerge Semin
DebugFS kernel interface provides a dedicated method to create the registers dump file. Use it instead of creating a generic DebugFS file with manually written read callback function. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-16-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Add DMA support to the DW SPI MMIO driverSerge Semin
Since the common code in the spi-dw-dma.c driver is ready to be used by the MMIO driver and now provides a method to generically (on any DT or ACPI-based platforms) retrieve the Tx/Rx DMA channel handlers, we can use it and a set of the common DW SPI DMA callbacks to enable DMA at least for generic "snps,dw-apb-ssi" and "snps,dwc-ssi-1.01a" devices. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-15-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Cleanup generic DW DMA code namingsSerge Semin
Since from now the former Intel MID platform layer is used as a generic DW SPI DMA module, let's alter the internal methods naming to be DMA-related instead of having the "mid_" prefix. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-14-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI coreSerge Semin
Seeing all of the DW SPI driver components like DW SPI DMA/PCI/MMIO depend on the DW SPI core code it's better to use the if-endif conditional kernel config statement to signify that common dependency. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-13-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Remove DW DMA code dependency from DW_DMAC_PCISerge Semin
Since there is a generic method available to initialize the DW SPI DMA interface on any DT and ACPI-based platforms, which in general can be designed with not only DW DMAC but with any DMA engine on board, we can freely remove the CONFIG_DW_DMAC_PCI config from dependency list of CONFIG_SPI_DW_DMA. Especially seeing that we don't use anything DW DMAC specific in the new driver. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-12-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Move Non-DMA code to the DW PCIe-SPI driverSerge Semin
This is a preparation patch before adding the DW DMA support into the DW SPI MMIO driver. We need to unpin the Non-DMA-specific code from the intended to be generic DW APB SSI DMA code. This isn't that hard, since the most part of the spi-dw-mid.c driver in fact implements a generic DMA interface for the DW SPI controller driver. The only Intel MID specifics concern getting the max frequency from the MRST Clock Control Unit and fetching the DMA controller channels from corresponding PCIe DMA controller. Since first one is related with the SPI interface configuration we moved it' implementation into the DW PCIe-SPI driver module. After that former spi-dw-mid.c file can be just renamed to be the DW SPI DMA module optionally compiled in to the DW APB SSI core driver. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-11-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Add core suffix to the DW APB SSI core source fileSerge Semin
Generic DMA support is going to be part of the DW APB SSI core object. In order to preserve the kernel loadable module name as spi-dw.ko, let's add the "-core" suffix to the object with generic DW APB SSI code and build it into the target spi-dw.ko driver. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-10-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Fix Rx-only DMA transfersSerge Semin
Tx-only DMA transfers are working perfectly fine since in this case the code just ignores the Rx FIFO overflow interrupts. But it turns out the SPI Rx-only transfers are broken since nothing pushing any data to the shift registers, so the Rx FIFO is left empty and the SPI core subsystems just returns a timeout error. Since DW DMAC driver doesn't support something like cyclic write operations of a single byte to a device register, the only way to support the Rx-only SPI transfers is to fake it by using a dummy Tx-buffer. This is what we intend to fix in this commit by setting the SPI_CONTROLLER_MUST_TX flag for DMA-capable platform. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-9-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Use DMA max burst to set the request thresholdsSerge Semin
Each channel of DMA controller may have a limited length of burst transaction (number of IO operations performed at ones in a single DMA client request). This parameter can be used to setup the most optimal DMA Tx/Rx data level values. In order to avoid the Tx buffer overrun we can set the DMA Tx level to be of FIFO depth minus the maximum burst transactions length. To prevent the Rx buffer underflow the DMA Rx level should be set to the maximum burst transactions length. This commit setups the DMA channels and the DW SPI DMA Tx/Rx levels in accordance with these rules. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-8-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Parameterize the DMA Rx/Tx burst lengthSerge Semin
It isn't good to have numeric literals in the code especially if there are multiple of them and they are related. Let's replace the Tx and Rx burst level literals with the corresponding constants. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-7-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Add SPI Rx-done wait method to DMA-based transferSerge Semin
Having any data left in the Rx FIFO after the DMA engine claimed it has finished all DMA transactions is an abnormal situation, since the DW SPI controller driver expects to have all the data being fetched and placed into the SPI Rx buffer at that moment. In case if that has happened we hopefully assume that the DMA engine may still be doing the data fetching, thus we give it sometime to finish. If after a short period of time the data is still left in the Rx FIFO, the driver will give up waiting and return an error indicating that the SPI controller/DMA engine must have hung up or failed at some point of doing their duties. Fixes: 7063c0d942a1 ("spi/dw_spi: add DMA support") Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Add SPI Tx-done wait method to DMA-based transferSerge Semin
Since DMA transfers are performed asynchronously with actual SPI bus transfers, then even if DMA transactions are finished it doesn't mean all data is actually pushed to the SPI bus. Some data might still be in the controller FIFO. This is specifically true for Tx-only transfers. In this case if the next SPI transfer is recharged while a tail of the previous one is still in FIFO, we'll loose that tail data. In order to fix that problem let's add the wait procedure of the Tx SPI transfer completion after the DMA transactions are finished. Fixes: 7063c0d942a1 ("spi/dw_spi: add DMA support") Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-5-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Locally wait for the DMA transfers completionSerge Semin
In general each DMA-based SPI transfer can be split up into two stages: DMA data transmission/reception and SPI-bus transmission/reception. DMA asynchronous transactions completion can be tracked by means of the DMA async Tx-descriptor completion callback. But that callback being called indicates that the DMA transfer has been finished, it doesn't mean that SPI data transmission is also done. Moreover in fact it isn't for at least Tx-only SPI transfers. Upon DMA transfer completion some data is left in the Tx FIFO and being pushed out by the SPI controller. So in order to make sure that an SPI transfer is completely pushed to the SPI-bus, the driver has to wait for both DMA transaction and the SPI-bus transmission/reception are finished. Note if there is a way to asynchronously track the former event by means of the DMA async Tx callback, there isn't easy one for the later (IRQ-based solution won't work since SPI controller doesn't notify about Rx FIFO being empty). The DMA transfer completion callback isn't suitable to wait for the SPI controller activity finish either. The callback might (in case of DW DMAC it will) be called in the tasklet context. Waiting for the SPI controller to complete the transfer might take a considerable amount of time since SPI-bus might be pretty slow. In this case delaying the execution in the tasklet atomic context might cause significant system performance drop. So to speak the best option we've got to solve the problem is to consequently wait for both stages being finished in the locally implemented SPI transfer execution procedure even if it costs us of the local wait-function re-implementation. In this case we don't need to use the SPI-core transfer-wait functionality, but we'll make sure that all DMA and SPI-bus transactions are completely finished before the SPI-core transfer_one callback returns. In this commit we provide an implementation of the DMA-transfers completion wait functionality. The DW APB SSI DMA-specific SPI transfer_one function waits for both Tx and Rx DMA transfers being finished, and only then exits with zero returned signalling to the SPI core that the SPI transfer is finished. This implementation is fully equivalent to the currently used DMA-execution-SPI-core-wait algorithm. The SPI-bus transmission/reception wait methods will be added in the follow-up commits. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Return any value retrieved from the dma_transfer callbackSerge Semin
DW APB SSI DMA-part of the driver may need to perform the requested SPI-transfer synchronously. In that case the dma_transfer() callback will return 0 as a marker of the SPI transfer being finished so the SPI core doesn't need to wait and may proceed with the SPI message trasnfers pumping procedure. This will be needed to fix the problem when DMA transactions are finished, but there is still data left in the SPI Tx/Rx FIFOs being sent/received. But for now make dma_transfer to return 1 as the normal dw_spi_transfer_one() method. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-3-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Set xfer effective_speed_hzSerge Semin
Seeing DW APB SSI controller doesn't support setting the exactly requested SPI bus frequency, but only a rounded frequency determined by means of the odd-numbered half-worded reference clock divider, it would be good to tune the SPI core up and initialize the current transfer effective_speed_hz. By doing so the core will be able to execute the xfer-related delays with better accuracy. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-2-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-28Merge series "add ecspi ERR009165 for i.mx6/7 soc family" from Robin Gong ↵Mark Brown
<yibin.gong@nxp.com>: There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO transfer to be send twice in DMA mode. Please get more information from: https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf. The workaround is adding new sdma ram script which works in XCH mode as PIO inside sdma instead of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0. The issue should be exist on all legacy i.mx6/7 soc family before i.mx6ul. NXP fix this design issue from i.mx6ul, so newer chips including i.mx6ul/ 6ull/6sll do not need this workaroud anymore. All other i.mx6/7/8 chips still need this workaroud. This patch set add new 'fsl,imx6ul-ecspi' for ecspi driver and 'ecspi_fixed' in sdma driver to choose if need errata or not. The first two reverted patches should be the same issue, though, it seems 'fixed' by changing to other shp script. Hope Sean or Sascha could have the chance to test this patch set if could fix their issues. Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not work on i.mx8mm because the event id is zero. PS: Please get sdma firmware from below linux-firmware and copy it to your local rootfs /lib/firmware/imx/sdma. https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma v2: 1.Add commit log for reverted patches. 2.Add comment for 'ecspi_fixed' in sdma driver. 3.Add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi' rather than remove. v3: 1.Confirm with design team make sure ERR009165 fixed on i.mx6ul/i.mx6ull /i.mx6sll, not fixed on i.mx8m/8mm and other i.mx6/7 legacy chips. Correct dts related dts patch in v2. 2.Clean eratta information in binding doc and new 'tx_glitch_fixed' flag in spi-imx driver to state ERR009165 fixed or not. 3.Enlarge burst size to fifo size for tx since tx_wml set to 0 in the errata workaroud, thus improve performance as possible. v4: 1.Add Ack tag from Mark and Vinod 2.Remove checking 'event_id1' zero as 'event_id0'. v5: 1.Add the last patch for compatible with the current uart driver which using rom script, so both uart ram script and rom script supported in latest firmware, by default uart rom script used. UART driver will be broken without this patch. v6: 1.Resend after rebase the latest next branch. 2.Remove below No.13~No.15 patches of v5 because they were mergered. ARM: dts: imx6ul: add dma support on ecspi ARM: dts: imx6sll: correct sdma compatible arm64: defconfig: Enable SDMA on i.mx8mq/8mm 3.Revert "dmaengine: imx-sdma: fix context cache" since 'context_loaded' removed. v7: 1.Put the last patch 13/13 'Revert "dmaengine: imx-sdma: fix context cache"' to the ahead of 03/13 'Revert "dmaengine: imx-sdma: refine to load context only once" so that no building waring during comes out during bisect. 2.Address Sascha's comments, including eliminating any i.mx6sx in this series, adding new 'is_imx6ul_ecspi()' instead imx in imx51 and taking care SMC bit for PIO. 3.Add back missing 'Reviewed-by' tag on 08/15(v5):09/13(v7) 'spi: imx: add new i.mx6ul compatible name in binding doc' v8: 1.remove 0003-Revert-dmaengine-imx-sdma-fix-context-cache.patch and merge it into 04/13 of v7 2.add 0005-spi-imx-fallback-to-PIO-if-dma-setup-failure.patch for no any ecspi function broken even if sdma firmware not updated. 3.merge 'tx.dst_maxburst' changes in the two continous patches into one patch to avoid confusion. 4.fix typo 'duplicated'. Robin Gong (13): Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core" Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores" Revert "dmaengine: imx-sdma: refine to load context only once" dmaengine: imx-sdma: remove duplicated sdma_load_context spi: imx: fallback to PIO if dma setup failure dmaengine: imx-sdma: add mcu_2_ecspi script spi: imx: fix ERR009165 spi: imx: remove ERR009165 workaround on i.mx6ul spi: imx: add new i.mx6ul compatible name in binding doc dmaengine: imx-sdma: remove ERR009165 on i.mx6ul dma: imx-sdma: add i.mx6ul compatible name dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm dmaengine: imx-sdma: add uart rom script .../devicetree/bindings/dma/fsl-imx-sdma.txt | 1 + .../devicetree/bindings/spi/fsl-imx-cspi.txt | 1 + arch/arm/boot/dts/imx6q.dtsi | 2 +- arch/arm/boot/dts/imx6qdl.dtsi | 8 +- drivers/dma/imx-sdma.c | 67 ++++++++++------ drivers/spi/spi-imx.c | 92 +++++++++++++++++++--- include/linux/platform_data/dma-imx-sdma.h | 8 +- 7 files changed, 135 insertions(+), 44 deletions(-) -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
2020-05-28spi: tegra20-sflash: Fix runtime PM imbalance on errorDinghao Liu
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20200523124758.28604-1-dinghao.liu@zju.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-28spi: tegra20-slink: Fix runtime PM imbalance on errorDinghao Liu
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20200523122909.25247-1-dinghao.liu@zju.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-28spi: tegra114: Fix runtime PM imbalance on errorDinghao Liu
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20200523125704.30300-1-dinghao.liu@zju.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-28spi: imx: fallback to PIO if dma setup failureRobin Gong
Fallback to PIO in case dma setup failed. For example, sdma firmware not updated but ERR009165 workaroud added in kernel. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/1590006865-20900-6-git-send-email-yibin.gong@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-26spi: spi-fsl-lpspi: Fix runtime PM imbalance on errorDinghao Liu
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20200523133859.5625-1-dinghao.liu@zju.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-26spi: Remove note about transfer limit for spi_write_then_read()Mark Brown
Originally spi_write_then_read() used a fixed statically allocated buffer which limited the maximum message size it could handle. This restriction was removed a while ago so that we could dynamically allocate a buffer if required but the kerneldoc was not updated to reflect this, do so. Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200525133120.57273-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-26spi: pxa2xx: Fix runtime PM ref imbalance on probe errorLukas Wunner
The PXA2xx SPI driver releases a runtime PM ref in the probe error path even though it hasn't acquired a ref earlier. Apparently commit e2b714afee32 ("spi: pxa2xx: Disable runtime PM if controller registration fails") sought to copy-paste the invocation of pm_runtime_disable() from pxa2xx_spi_remove(), but erroneously copied the call to pm_runtime_put_noidle() as well. Drop it. Fixes: e2b714afee32 ("spi: pxa2xx: Disable runtime PM if controller registration fails") Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org # v4.17+ Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/58b2ac6942ca1f91aaeeafe512144bc5343e1d84.1590408496.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-26spi: pxa2xx: Fix controller unregister orderLukas Wunner
The PXA2xx SPI driver uses devm_spi_register_controller() on bind. As a consequence, on unbind, __device_release_driver() first invokes pxa2xx_spi_remove() before unregistering the SPI controller via devres_release_all(). This order is incorrect: pxa2xx_spi_remove() disables the chip, rendering the SPI bus inaccessible even though the SPI controller is still registered. When the SPI controller is subsequently unregistered, it unbinds all its slave devices. Because their drivers cannot access the SPI bus, e.g. to quiesce interrupts, the slave devices may be left in an improper state. As a rule, devm_spi_register_controller() must not be used if the ->remove() hook performs teardown steps which shall be performed after unregistering the controller and specifically after unbinding of slaves. Fix by reverting to the non-devm variant of spi_register_controller(). An alternative approach would be to use device-managed functions for all steps in pxa2xx_spi_remove(), e.g. by calling devm_add_action_or_reset() on probe. However that approach would add more LoC to the driver and it wouldn't lend itself as well to backporting to stable. The improper use of devm_spi_register_controller() was introduced in 2013 by commit a807fcd090d6 ("spi: pxa2xx: use devm_spi_register_master()"), but all earlier versions of the driver going back to 2006 were likewise broken because they invoked spi_unregister_master() at the end of pxa2xx_spi_remove(), rather than at the beginning. Fixes: e0c9905e87ac ("[PATCH] SPI: add PXA2xx SSP SPI Driver") Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org # v2.6.17+ Cc: Tsuchiya Yuto <kitakar@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=206403#c1 Link: https://lore.kernel.org/r/834c446b1cf3284d2660f1bee1ebe3e737cd02a9.1590408496.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-26spi: dw: Fix controller unregister orderLukas Wunner
The Designware SPI driver uses devm_spi_register_controller() on bind. As a consequence, on unbind, __device_release_driver() first invokes dw_spi_remove_host() before unregistering the SPI controller via devres_release_all(). This order is incorrect: dw_spi_remove_host() shuts down the chip, rendering the SPI bus inaccessible even though the SPI controller is still registered. When the SPI controller is subsequently unregistered, it unbinds all its slave devices. Because their drivers cannot access the SPI bus, e.g. to quiesce interrupts, the slave devices may be left in an improper state. As a rule, devm_spi_register_controller() must not be used if the ->remove() hook performs teardown steps which shall be performed after unregistering the controller and specifically after unbinding of slaves. Fix by reverting to the non-devm variant of spi_register_controller(). An alternative approach would be to use device-managed functions for all steps in dw_spi_remove_host(), e.g. by calling devm_add_action_or_reset() on probe. However that approach would add more LoC to the driver and it wouldn't lend itself as well to backporting to stable. Fixes: 04f421e7b0b1 ("spi: dw: use managed resources") Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org # v3.14+ Cc: Baruch Siach <baruch@tkos.co.il> Link: https://lore.kernel.org/r/3fff8cb8ae44a9893840d0688be15bb88c090a14.1590408496.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-25spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't be ↵dillon min
coexit with 'SPI_3WIRE' mode since chip spi driver need get the transfer direction by 'tx_buf' and 'rx_buf' of 'struct spi_transfer' in 'SPI_3WIRE' mode. so, we need bypass 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' feature in 'SPI_3WIRE' mode Signed-off-by: dillon min <dillon.minfei@gmail.com> Link: https://lore.kernel.org/r/1590378348-8115-9-git-send-email-dillon.minfei@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-25spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4dillon min
in l3gd20 driver startup, there is a setup failed error return from stm32 spi driver " [ 2.687630] st-gyro-spi spi0.0: supply vdd not found, using dummy regulator [ 2.696869] st-gyro-spi spi0.0: supply vddio not found, using dummy regulator [ 2.706707] spi_stm32 40015000.spi: SPI transfer setup failed [ 2.713741] st-gyro-spi spi0.0: SPI transfer failed: -22 [ 2.721096] spi_master spi0: failed to transfer one message from queue [ 2.729268] iio iio:device0: failed to read Who-Am-I register. [ 2.737504] st-gyro-spi: probe of spi0.0 failed with error -22 " after debug into spi-stm32 driver, st-gyro-spi split two steps to read l3gd20 id first: send command to l3gd20 with read id command in tx_buf, rx_buf is null. second: read id with tx_buf is null, rx_buf not null. so, for second step, stm32 driver recongise this process as 'SPI_SIMPLE_RX' from stm32_spi_communication_type(), but there is no related process for this type in stm32f4_spi_set_mode(), then we get error from stm32_spi_transfer_one_setup(). we can use two method to fix this bug. 1, use stm32 spi's "In unidirectional receive-only mode (BIDIMODE=0 and RXONLY=1)". but as our code running in sdram, the read latency is too large to get so many receive overrun error in interrupts handler. 2, use stm32 spi's "In full-duplex (BIDIMODE=0 and RXONLY=0)", as tx_buf is null, so add flag 'SPI_MASTER_MUST_TX' to spi master. Change since V4: 1 remove dummy data sent out by stm32 spi driver 2 add flag 'SPI_MASTER_MUST_TX' to spi master Signed-off-by: dillon min <dillon.minfei@gmail.com> Link: https://lore.kernel.org/r/1590378348-8115-8-git-send-email-dillon.minfei@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-25spi: mux: repair mux usagePeter Rosin
It is not valid to cache/short out selection of the mux. mux_control_select() only locks the mux until mux_control_deselect() is called. mux_control_deselect() may put the mux in some low power state or some other user of the mux might select it for other purposes. These things are probably not happening in the original setting where this driver was developed, but it is said to be a generic SPI mux. Also, the mux framework will short out the actual low level muxing operation when/if that is possible. Fixes: e9e40543ad5b ("spi: Add generic SPI multiplexer") Signed-off-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/20200525104352.26807-1-peda@axentia.se Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-22spi: Make spi_delay_exec() warn if called from atomic contextMark Brown
If the delay used is long enough the spi_delay_exec() will use a sleeping function to implement it. Add a might_sleep() here to help avoid callers using this from an atomic context and running into problems at runtime on other systems. Suggested-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200522155005.46099-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-22Merge series "spi: dw: Add generic DW DMA controller support" from Serge ↵Mark Brown
Semin <Sergey.Semin@baikalelectronics.ru>: Baikal-T1 SoC provides a DW DMA controller to perform low-speed peripherals Mem-to-Dev and Dev-to-Mem transaction. This is also applicable to the DW APB SSI devices embedded into the SoC. Currently the DMA-based transfers are supported by the DW APB SPI driver only as a middle layer code for Intel MID/Elkhart PCI devices. Seeing the same code can be used for normal platform DMAC device we introduced a set of patches to fix it within this series. First of all we need to add the Tx and Rx DMA channels support into the DW APB SSI binding. Then there are several fixes and cleanups provided as a initial preparation for the Generic DMA support integration: add Tx/Rx finish wait methods, clear DMAC register when done or stopped, Fix native CS being unset, enable interrupts in accordance with DMA xfer mode, discard static DW DMA slave structures, discard unused void priv pointer and dma_width member of the dw_spi structure, provide the DMA Tx/Rx burst length parametrisation and make sure it's optionally set in accordance with the DMA max-burst capability. In order to have the DW APB SSI MMIO driver working with DMA we need to initialize the paddr field with the physical base address of the DW APB SSI registers space. Then we unpin the Intel MID specific code from the generic DMA one and placed it into the spi-dw-pci.c driver, which is a better place for it anyway. After that the naming cleanups are performed since the code is going to be used for a generic DMAC device. Finally the Generic DMA initialization can be added to the generic version of the DW APB SSI IP. Last but not least we traditionally convert the legacy plain text-based dt-binding file with yaml-based one and as a cherry on a cake replace the manually written DebugFS registers read method with a ready-to-use for the same purpose regset32 DebugFS interface usage. This patchset is rebased and tested on the spi/for-next (5.7-rc5): base-commit: fe9fce6b2cf3 ("Merge remote-tracking branch 'spi/for-5.8' into spi-next") Link: https://lore.kernel.org/linux-spi/20200508132943.9826-1-Sergey.Semin@baikalelectronics.ru/ Changelog v2: - Rebase on top of the spi repository for-next branch. - Move bindings conversion patch to the tail of the series. - Move fixes to the head of the series. - Apply as many changes as possible to be applied the Generic DMA functionality support is added and the spi-dw-mid is moved to the spi-dw-dma driver. - Discard patch "spi: dw: Fix dma_slave_config used partly uninitialized" since the problem has already been fixed. - Add new patch "spi: dw: Discard unused void priv pointer". - Add new patch "spi: dw: Discard dma_width member of the dw_spi structure". n_bytes member of the DW SPI data can be used instead. - Build the DMA functionality into the DW APB SSI core if required instead of creating a separate kernel module. - Use conditional statement instead of the ternary operator in the ref clock getter. Link: https://lore.kernel.org/linux-spi/20200515104758.6934-1-Sergey.Semin@baikalelectronics.ru/ Changelog v3: - Use spi_delay_exec() method to wait for the DMA operation completion. - Explicitly initialize the dw_dma_slave members on stack. - Discard the dws->fifo_len utilization in the Tx FIFO DMA threshold setting from the patch where we just add the default burst length constants. - Use min() method to calculate the optimal burst values. - Add new patch which moves the spi-dw.c source file to spi-dw-core.c in order to preserve the DW APB SSI core driver name. - Add commas in the debugfs_reg32 structure initializer and after the last entry of the dw_spi_dbgfs_regs array. Link: https://lore.kernel.org/linux-spi/20200521012206.14472-1-Sergey.Semin@baikalelectronics.ru Changelog v4: - Get back ndelay() method to wait for an SPI transfer completion. spi_delay_exec() isn't suitable for the atomic context. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Maxim Kaurkin <Maxim.Kaurkin@baikalelectronics.ru> Cc: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru> Cc: Ekaterina Skachko <Ekaterina.Skachko@baikalelectronics.ru> Cc: Vadim Vlasov <V.Vlasov@baikalelectronics.ru> Cc: Alexey Kolotnikov <Alexey.Kolotnikov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-spi@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Serge Semin (16): spi: dw: Add Tx/Rx finish wait methods to the MID DMA spi: dw: Enable interrupts in accordance with DMA xfer mode spi: dw: Discard static DW DMA slave structures spi: dw: Discard unused void priv pointer spi: dw: Discard dma_width member of the dw_spi structure spi: dw: Parameterize the DMA Rx/Tx burst length spi: dw: Use DMA max burst to set the request thresholds spi: dw: Fix Rx-only DMA transfers spi: dw: Add core suffix to the DW APB SSI core source file spi: dw: Move Non-DMA code to the DW PCIe-SPI driver spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core spi: dw: Cleanup generic DW DMA code namings spi: dw: Add DMA support to the DW SPI MMIO driver spi: dw: Use regset32 DebugFS method to create regdump file dt-bindings: spi: Convert DW SPI binding to DT schema .../bindings/spi/snps,dw-apb-ssi.txt | 44 --- .../bindings/spi/snps,dw-apb-ssi.yaml | 127 +++++++++ .../devicetree/bindings/spi/spi-dw.txt | 24 -- drivers/spi/Kconfig | 15 +- drivers/spi/Makefile | 5 +- drivers/spi/{spi-dw.c => spi-dw-core.c} | 88 ++---- drivers/spi/{spi-dw-mid.c => spi-dw-dma.c} | 261 ++++++++++-------- drivers/spi/spi-dw-mmio.c | 4 + drivers/spi/spi-dw-pci.c | 50 +++- drivers/spi/spi-dw.h | 33 ++- 10 files changed, 392 insertions(+), 259 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt create mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml delete mode 100644 Documentation/devicetree/bindings/spi/spi-dw.txt rename drivers/spi/{spi-dw.c => spi-dw-core.c} (82%) rename drivers/spi/{spi-dw-mid.c => spi-dw-dma.c} (55%) -- 2.25.1
2020-05-22spi: rb4xx: update driver to be device tree awareChristopher Hill
This patch updates the spi driver spi-rb4xx.c to be device tree aware Signed-off-by: Christopher Hill <ch6574@gmail.com> Link: https://lore.kernel.org/r/20200521183631.37806-2-ch6574@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-22spi: rb4xx: null pointer bug fixChristopher Hill
This patch fixes a null pointer bug in the spi driver spi-rb4xx.c by moving the private data initialization to earlier in probe Signed-off-by: Christopher Hill <ch6574@gmail.com> Link: https://lore.kernel.org/r/20200521183631.37806-1-ch6574@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-22spi: dw: Discard dma_width member of the dw_spi structureSerge Semin
This member has exactly the same value as n_bytes of the DW SPI private data object, it's calculated at the same point of the transfer method, n_bytes isn't changed during the whole transfer, and they even serve for the same purpose - keep number of bytes per transfer word, though the dma_width is used only to calculate the DMA source/destination addresses width, which n_bytes could be also utilized for. Taking all of these into account let's replace the dma_width member usage with n_bytes one and remove the former. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200522000806.7381-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-22spi: dw: Discard unused void priv pointerSerge Semin
Seeing the "void *priv" member of the dw_spi data structure is unused let's remove it. The glue-layers can embed the DW APB SSI controller descriptor into their private data object. MMIO driver for instance already utilizes that design pattern. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200522000806.7381-5-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-22spi: dw: Discard static DW DMA slave structuresSerge Semin
Having them declared is redundant since each struct dw_dma_chan has the same structure embedded and the structure from the passed dma_chan private pointer will be copied there as a result of the next calls chain: dma_request_channel() -> find_candidate() -> dma_chan_get() -> device_alloc_chan_resources() = dwc_alloc_chan_resources() -> dw_dma_filter(). So just remove the static dw_dma_chan structures and use a locally declared data instance with dst_id/src_id set to the same values as the static copies used to have. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200522000806.7381-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-22spi: dw: Enable interrupts in accordance with DMA xfer modeSerge Semin
It's pointless to track the Tx overrun interrupts if Rx-only SPI transfer is issued. Similarly there is no need in handling the Rx overrun/underrun interrupts if Tx-only SPI transfer is executed. So lets unmask the interrupts only if corresponding SPI transactions are implied. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200522000806.7381-3-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-20spi: bcm2835: Tear down DMA before turning off SPI controllerLukas Wunner
On unbind of the BCM2835 SPI driver, the SPI controller is disabled first and the DMA channels are terminated and torn down afterwards. This seems backwards: In the theoretical case that DMA is active, it might try to fill the SPI FIFOs even after the controller has been disabled. Reverse the order, thereby mirroring what's done on ->probe(). Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/ac79f1e3d6fd9a1f5e0cb4008c43b98ea70be3c2.1589557526.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-20Merge branch 'for-5.7' of ↵Mark Brown
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-5.8
2020-05-20spi: bcm2835aux: Fix controller unregister orderLukas Wunner
The BCM2835aux SPI driver uses devm_spi_register_master() on bind. As a consequence, on unbind, __device_release_driver() first invokes bcm2835aux_spi_remove() before unregistering the SPI controller via devres_release_all(). This order is incorrect: bcm2835aux_spi_remove() turns off the SPI controller, including its interrupts and clock. The SPI controller is thus no longer usable. When the SPI controller is subsequently unregistered, it unbinds all its slave devices. If their drivers need to access the SPI bus, e.g. to quiesce their interrupts, unbinding will fail. As a rule, devm_spi_register_master() must not be used if the ->remove() hook performs teardown steps which shall be performed after unbinding of slaves. Fix by using the non-devm variant spi_register_master(). Note that the struct spi_master as well as the driver-private data are not freed until after bcm2835aux_spi_remove() has finished, so accessing them is safe. Fixes: 1ea29b39f4c8 ("spi: bcm2835aux: add bcm2835 auxiliary spi device driver") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.4+ Cc: Martin Sperl <kernel@martin.sperl.org> Link: https://lore.kernel.org/r/32f27f4d8242e4d75f9a53f7e8f1f77483b08669.1589557526.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 10:12:02 +0000