summaryrefslogtreecommitdiff
path: root/drivers/spi
AgeCommit message (Collapse)Author
2014-01-06spi: dw-pci: fix typoBaruch Siach
Commit 04f421e7b0b10 (spi: dw: use managed resources) introduced a typo in struct field reference. Fix it. Fixes build failure: drivers/spi/spi-dw-pci.c: In function 'spi_pci_probe': drivers/spi/spi-dw-pci.c:50:29: error: 'dev' undeclared (first use in this function) dwpci = devm_kzalloc(&pdev-dev, sizeof(struct dw_spi_pci), GFP_KERNEL); ^ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-02Merge remote-tracking branches 'asoc/topic/ad1836', 'asoc/topic/ad193x', ↵Mark Brown
'asoc/topic/adav80x', 'asoc/topic/adsp', 'asoc/topic/ak4641', 'asoc/topic/ak4642', 'asoc/topic/arizona', 'asoc/topic/atmel', 'asoc/topic/au1x', 'asoc/topic/axi', 'asoc/topic/bcm2835', 'asoc/topic/blackfin', 'asoc/topic/cs4271', 'asoc/topic/cs42l52', 'asoc/topic/da7210', 'asoc/topic/davinci', 'asoc/topic/ep93xx', 'asoc/topic/fsl', 'asoc/topic/fsl-mxs', 'asoc/topic/generic', 'asoc/topic/hdmi', 'asoc/topic/jack', 'asoc/topic/jz4740', 'asoc/topic/max98090', 'asoc/topic/mxs', 'asoc/topic/omap', 'asoc/topic/pxa', 'asoc/topic/rcar', 'asoc/topic/s6000', 'asoc/topic/sai', 'asoc/topic/samsung', 'asoc/topic/sgtl5000', 'asoc/topic/spear', 'asoc/topic/ssm2518', 'asoc/topic/ssm2602', 'asoc/topic/tegra', 'asoc/topic/tlv320aic3x', 'asoc/topic/twl6040', 'asoc/topic/txx9', 'asoc/topic/uda1380', 'asoc/topic/width', 'asoc/topic/wm8510', 'asoc/topic/wm8523', 'asoc/topic/wm8580', 'asoc/topic/wm8711', 'asoc/topic/wm8728', 'asoc/topic/wm8731', 'asoc/topic/wm8741', 'asoc/topic/wm8750', 'asoc/topic/wm8753', 'asoc/topic/wm8776', 'asoc/topic/wm8804', 'asoc/topic/wm8900', 'asoc/topic/wm8901', 'asoc/topic/wm8940', 'asoc/topic/wm8962', 'asoc/topic/wm8974', 'asoc/topic/wm8985', 'asoc/topic/wm8988', 'asoc/topic/wm8990', 'asoc/topic/wm8991', 'asoc/topic/wm8994', 'asoc/topic/wm8995', 'asoc/topic/wm9081' and 'asoc/topic/x86' into asoc-next
2014-01-02spi: s3c64xx: Remove duplicate code to clear S3C64XX_SPI_SLAVE_SEL registerAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-02spi: core: Use list_first_entry_or_null() instead of open-codedAxel Lin
Use list_first_entry_or_null() to save a few lines. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31Merge tag 'v3.13-rc6' into spi-dwMark Brown
To resolve trivial overlaps with fixes. Linux 3.13-rc6
2013-12-31spi/qspi: Fix runtime resume pathSourav Poddar
Due to the following commit commit 160a061301c7adf54c40696e7ceedc73f6b747dd Author: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Date: Mon Nov 11 14:13:41 2013 +0800 spi/qspi: set correct platform drvdata in ti_qspi_probe() The ti_qspi_remove() use the platform drvdata as a type of struct ti_qspi, we should pass correct platform drvdata to platform_set_drvdata() in ti_qspi_probe(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@linaro.org> platform_set_drvdata was changed in the probe, so we need to correspondingly change deferencing of qspi in runtime resume path. Else, this will lead to a NULL dereference pointer. Based on v3.13-rc3 Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31spi: dw: fix memory leak on error pathBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31spi: dw-mmio: prepare the clock before enablingBaruch Siach
This is required for common clock support. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31spi: dw: use managed resourcesBaruch Siach
Migrate mmio code and core driver to managed resources to reduce boilerplate error handling code. Also, handle clk_enable() failure while at it, and drop unused dw_spi iolen field. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-30Merge tag 'v3.13-rc6' into spi-rcarMark Brown
To resolve spurious merge conflicts with fixes. Linux 3.13-rc6
2013-12-30spi: dw: drop unused struct dw_spi fieldBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-30spi: Eliminate 3WIRE spi_transfer checkTrent Piepho
Checking for SPI_3WIRE isn't needed. spi_setup() already prevents 3WIRE mode from being combined with DUAL or QUAD mode support. So there is no need to differentiate between a single bit device with SPI_3WIRE set and one with without. It doesn't change the allowed bit widths. Signed-off-by: Trent Piepho <tpiepho@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-24spi: rspi: Use u8 for 8-bit register valuesGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-24spi: rspi: Use DUMMY_DATA macro instead of hardcoded valueGeert Uytterhoeven
Make it more obvious that this value is dummy data. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-24spi: rspi: Make more pointers constGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-24spi: rspi: Remove castsGeert Uytterhoeven
Remove useless casts, and do not cast away const. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-24spi: rspi: Use dev_get_platdata() instead of raw dev.platform_data accessGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-24spi: rspi: Fix typo when clearing SPSR_OVRFGeert Uytterhoeven
The overrun flag should be cleared in the SPI Status Register, not in the SPI Control Register, based on the SDK sample code. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-24spi: rspi: Fix NULL pointer dereference on SH7757Geert Uytterhoeven
SH7757 doesn't pass platform data, in which case spi-rspi uses default parameters. However, commit 5ce0ba88650f2606244a761d92e2b725f4ab3583 ("spi: rcar: add Renesas QSPI support on RSPI") added a new user of the platform data, but forgot to check for its validity first, causing a NULL pointer dereference on SH7757. Add the missing check to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-20spi: nuc900: remove redundant return value check of platform_get_resource()Wei Yongjun
Remove unneeded error handling on the result of a call to platform_get_resource() when the value is passed to devm_ioremap_resource(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-20spi: txx9: drop clk_put for devm_clk_get in txx9spi_probe()Wei Yongjun
devm_clk_get() is used so there is no reason to explicitly call clk_put() in txx9spi_probe() functions. Fixes: 18e34d568efa ('spi: txx9: Use devm_clk_get()') Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.og>
2013-12-20spi: spi-s3c24xx: remove redundant return value check of platform_get_resource()Wei Yongjun
Remove unneeded error handling on the result of a call to platform_get_resource() when the value is passed to devm_ioremap_resource(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-20spi: spi-imx: Fix out-of-order CS/SCLK operation at low speedsMarek Vasut
Problem: -------- The problem this patch addresses has the following assumptions about the SPI bus setup: - The hardware used to find this is Freescale i.MX537 @ 1200MHz - The SPI SCLK operate at very low speed, less than 200 kHz - There are two SPI devices attached to the bus - Each device uses different GPIO for chipselect - Each device requires different SCLK signal polarity The observation of the SCLK and GPIO chipselect lines with a logic analyzer shows, that the SCLK polarity change does sometimes happen after the GPIO chipselect is asserted. The SPI slave device reacts on that by counting the SCLK polarity change as a clock pulse, which disrupts the communication with the SPI slave device. Explanation: ------------ We found an interesting correlation, that the maximum delay between the write into the ECSPIx_CONFIGREG register and the change of SCLK polarity at each SCLK frequency of 10 kHz, 20 kHz, 50 kHz and 100 kHz is 100 uS, 50 uS, 20 uS and 10 uS respectively. This lead us to a theory, that at SCLK frequency of 1 Hz, the delay would be 1 S. Therefore, the time it takes for the write to ECSPIx_CONFIGREG to take effect in the hardware is up to the duration of 1 tick of the SCLK clock. During this delay period, if the SCLK frequency is too low, the execution of the spi-imx.c driver can advance so much, that the GPIO chipselect will be asserted. The GPIO chipselect is asserted almost immediatelly. Solution: --------- The solution this patch presents is simple. We calculate the resulting SCLK clock first by dividing the ECSPI block clock by both dividers that are to be programmed into the configuration register. Based on the resulting SCLK clock, we derive the delay it will take for the changes to get really applied. We are extra careful here so we delay twice as long as we should. Note that the patch does not create additional overhead at high speeds as the delay will likely be close to zero there. Signed-off-by: Marek Vasut <marex@denx.de> To: linux-spi@vger.kernel.org Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Huang Shijie <b32955@freescale.com> Cc: Mark Brown <broonie@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-19spi/qspi: parse register by name.Sourav Poddar
Modify the qspi driver to parse reg information by name. If "reg names" is not found, then revert back to normal get resource. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-18spi: mpc512x: Use devm_*() functionsJingoo Han
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17spi: bcm2835: Use devm_request_irq()Jingoo Han
Use devm_request_irq() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17spi: txx9: Use devm_clk_get()Jingoo Han
Use devm_clk_get() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17spi: s3c24xx: Use devm_*() functionsJingoo Han
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17spi: ath79: Use devm_*() functionsJingoo Han
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17spi: davinci: Use devm_*() functionsJingoo Han
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17spi: nuc900: Use devm_*() functionsJingoo Han
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17spi: bcm63xx: fix reference leak to master in bcm63xx_spi_remove()Wei Yongjun
Once a spi_master_get() call succeeds, we need an additional spi_master_put() call to free the memory, otherwise we will leak a reference to master. Fix by removing the unnecessary spi_master_get() call. Fixes: 247263dba208 ('spi: bcm63xx: use devm_spi_register_master()') Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17spi/bcm63xx: fix pm sleep supportJonas Gorski
Use the correct symbol to guard the callbacks and use appropriate defines for setting up the ops struct. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17spi/bcm63xx: check return value of clk_prepare_enableJonas Gorski
Ensure we notice if the clock cannot be enabled for any reason and pass the error down. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17spi/bcm63xx: don't reject reads >= 256 bytesJonas Gorski
The rx_tail register is only 8 bit wide, so it will wrap around after 256 read bytes. This makes it rather meaningless, so drop any usage of it to not treat reads over 256 as failed. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17spi: bcm63xx: Use devm_clk_get()Jingoo Han
Use devm_clk_get() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17spi/bcm63xx: don't substract prepend length from total lengthJonas Gorski
The spi command must include the full message length including any prepended writes, else transfers larger than 256 bytes will be incomplete. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-12-17spi/bcm63xx-hsspi: fix pm sleep supportJonas Gorski
Use the right CONFIG symbol to guard, properly (un)preprare clocks on suspend/resume, and check the result of it. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17spi/bcm63xx-hsspi: use devm_register_master()Jonas Gorski
Simplifies the remove call. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17spi/bcm63xx-hsspi: check result of clk_prepare_enableJonas Gorski
Ensure we notice if the clock cannot be enabled for any reason and pass the error down. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17spi: bcm63xx-hsspi: Use devm_clk_get()Jingoo Han
Use devm_clk_get() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-16spi: tegra: checking for ERR_PTR instead of NULLDan Carpenter
dma_request_slave_channel() returns NULL on error and not ERR_PTRs. I've fixed this by using dma_request_slave_channel_reason() which does return ERR_PTRs. Fixes: a915d150f68d ('spi: tegra: convert to standard DMA DT bindings') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-12spi/fsl-espi: Add Power Management support for eSPI controllerHou Zhiqiang
Add PM support for eSPI controller using callback function suspend and resume in .driver.pm of platform_driver. Signed-off-by: Hou Zhiqiang <b48286@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-11spi: tegra: convert to standard DMA DT bindingsStephen Warren
By using dma_request_slave_channel_or_err(), the DMA slave ID can be looked up from standard DT properties, and squirrelled away during channel allocation. Hence, there's no need to use a custom DT property to store the slave ID. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Brown <broonie@linaro.org>
2013-12-11spi: tegra: use reset frameworkStephen Warren
Tegra's clock driver now provides an implementation of the common reset API (include/linux/reset.h). Use this instead of the old Tegra- specific API; that will soon be removed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Brown <broonie@linaro.org> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-11spi/fsl-espi: fix the return value judgment of irq_of_parse_and_map.Hou Zhiqiang
Signed-off-by: Hou Zhiqiang <b48286@freescale.com> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-09spi: tegra20-sflash: use u32 for 32-bit register valuesMichal Nazarewicz
Previously used “unsigned long” may lead to confusion should the code be compiled for 64-bit machine. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-09spi: tegra20-slink: use u32 for 32-bit register valuesMichal Nazarewicz
Previously used “unsigned long” may lead to confusion should the code be compiled for 64-bit machine. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-09spi: tegra114: use u32 for 32-bit register valuesMichal Nazarewicz
Previously used “unsigned long” may lead to confusion should the code be compiled for 64-bit machine. This commit also removes some unused fields of the tegra_spi_data structure as well as removes duplicated #defines. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-09spi: rcar: Use devm_spi_register_master()Jingoo Han
Use devm_spi_register_master() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 14:41:59 +0000