summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-tegra20-slink.c
AgeCommit message (Collapse)Author
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 228 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-27spi: tegra20-slink: change chip select action orderRandolph Maaßen
To transfer via SPI the tegra20-slink driver first sets the command register, which contains the chip select value, and after that the command2 register, which contains the chip select line. This leads to a small spike in the chip selct 0 line between the set of the value and the selection of the chip select line. This commit changes the order of the register writes so that first the chip select line is chosen and then the value is set, removing the spike. Signed-off-by: Randolph Maaßen <gaireg@gaireg.de> Reviewed-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03spi: tegra20-slink: explicitly enable/disable clockMarcel Ziswiler
Depending on the SPI instance one may get an interrupt storm upon requesting resp. interrupt unless the clock is explicitly enabled beforehand. This has been observed trying to bring up instance 4 on T20. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-03-06spi: tegra20-slink: use true and false for boolean valuesGustavo A. R. Silva
Assign true or false to boolean variables instead of an integer value. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-19spi: tegra20-slink: explicitly request exclusive reset controlPhilipp Zabel
Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-spi@vger.kernel.org Cc: linux-tegra@vger.kernel.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-24spi: tegra: fix spelling mistake: "trasfer" -> "transfer"Colin Ian King
trivial fix to spelling mistake in dbg_err messages Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20spi: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-07spi: tegra20-slink: Make of_device_id array constJingoo Han
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-30Merge remote-tracking branches 'spi/topic/imx', 'spi/topic/init', ↵Mark Brown
'spi/topic/mpc512x-psc', 'spi/topic/mpc52xx', 'spi/topic/mxs', 'spi/topic/nuc900', 'spi/topic/oc-tiny' and 'spi/topic/octeon' into spi-next
2014-03-30Merge remote-tracking branches 'spi/topic/bus-num', 'spi/topic/cleanup', ↵Mark Brown
'spi/topic/clps711x', 'spi/topic/coldfire', 'spi/topic/completion' and 'spi/topic/davinci' into spi-next
2014-02-16spi: Remove explictly set bus_num and num_chipselect to default settingAxel Lin
The purpose of commit 1e8a52e18cfb "spi: By default setup spi_masters with 1 chipselect and dynamics bus number" is to avoid setting default value for bus_num and num_chipselect in spi master drivers. So let's remove the duplicate code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-By: David Daney <david.daney@cavium.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-12spi: Remove duplicate code to check chip_selectAxel Lin
In spi_add_device(), we have the code to validate spi->chip_select. So remove the duplicate code in various drivers. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-11spi: tegra20-slink: Convert to use master->max_speed_hzAxel Lin
Use master->max_speed_hz instead of tspi->spi_max_frequency, so spi core will handle checking transfer speed. In additional, since commit 052eb2d49006 'spi: core: Set max_speed_hz of spi_device default to max_speed_hz of controller', spi core will also set default spi->max_speed_hz if it is not set. So remove the duplicate code in tegra_slink_setup. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03spi: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-25Merge tag 'spi-v3.14-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "A respun version of the merges for the pull request previously sent with a few additional fixes. The last two merges were fixed up by hand since the branches have moved on and currently have the prior merge in them. Quite a busy release for the SPI subsystem, mostly in cleanups big and small scattered through the stack rather than anything else: - New driver for the Broadcom BC63xx HSSPI controller - Fix duplicate device registration for ACPI - Conversion of s3c64xx to DMAEngine (this pulls in platform and DMA changes upon which the transiton depends) - Some small optimisations to reduce the amount of time we hold locks in the datapath, eliminate some redundant checks and the size of a spi_transfer - Lots of fixes, cleanups and general enhancements to drivers, especially the rspi and Atmel drivers" * tag 'spi-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (112 commits) spi: core: Fix transfer failure when master->transfer_one returns positive value spi: Correct set_cs() documentation spi: Clarify transfer_one() w.r.t. spi_finalize_current_transfer() spi: Spelling s/finised/finished/ spi: sc18is602: Convert to use bits_per_word_mask spi: Remove duplicate code to set default bits_per_word setting spi/pxa2xx: fix compilation warning when !CONFIG_PM_SLEEP spi: clps711x: Add MODULE_ALIAS to support module auto-loading spi: rspi: Add missing clk_disable() calls in error and cleanup paths spi: rspi: Spelling s/transmition/transmission/ spi: rspi: Add support for specifying CPHA/CPOL spi/pxa2xx: initialize DMA channels to -1 to prevent inadvertent match spi: rspi: Add more QSPI register documentation spi: rspi: Add more RSPI register documentation spi: rspi: Remove dependency on DMAE for SHMOBILE spi/s3c64xx: Correct indentation spi: sh: Use spi_sh_clear_bit() instead of open-coded spi: bitbang: Grammar s/make to make/to make/ spi: sh-hspi: Spelling s/recive/receive/ spi: core: Improve tx/rx_nbits check comments ...
2013-12-16spi: tegra: checking for ERR_PTR instead of NULLDan Carpenter
dma_request_slave_channel() returns NULL on error and not ERR_PTRs. I've fixed this by using dma_request_slave_channel_reason() which does return ERR_PTRs. Fixes: a915d150f68d ('spi: tegra: convert to standard DMA DT bindings') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-11spi: tegra: convert to standard DMA DT bindingsStephen Warren
By using dma_request_slave_channel_or_err(), the DMA slave ID can be looked up from standard DT properties, and squirrelled away during channel allocation. Hence, there's no need to use a custom DT property to store the slave ID. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Brown <broonie@linaro.org>
2013-12-11spi: tegra: use reset frameworkStephen Warren
Tegra's clock driver now provides an implementation of the common reset API (include/linux/reset.h). Use this instead of the old Tegra- specific API; that will soon be removed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Brown <broonie@linaro.org> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-09spi: tegra20-slink: use u32 for 32-bit register valuesMichal Nazarewicz
Previously used “unsigned long” may lead to confusion should the code be compiled for 64-bit machine. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-15tree-wide: use reinit_completion instead of INIT_COMPLETIONWolfram Sang
Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-25Merge remote-tracking branch 'spi/topic/tegra-slink' into spi-nextMark Brown
2013-10-25Merge remote-tracking branch 'spi/topic/tegra' into spi-nextMark Brown
2013-10-17spi/tegra20-slink: Move first transfer preparation to prepare_messageMark Brown
This is more idiomatic for the factored out message processing and gives a small simplification of the code since we always set the per-transfer parameters in the same fashion. Signed-off-by: Mark Brown <broonie@linaro.org> Tested-by: Stephen Warren <swarren@nvidia.com>
2013-10-17spi/tegra20-slink: Crude refactoring to use core message parsingMark Brown
This is a half done conversion with minimal code reorganisation provided for bisection purposes. A further patch will move the first transfer preparation into tegra_slink_prepare_message(). The cs_change and udelay handling is removed, these should be implemented by the framework and in any case are buggy - the two fields should not be related and the cs_change handling appears to at best only work the first time it's used in a message. Signed-off-by: Mark Brown <broonie@linaro.org> Tested-by: Stephen Warren <swarren@nvidia.com>
2013-10-15spi: tegra20-slink: Fix checkpatch issueJingoo Han
Fix the following checkpatch warning. WARNING: space prohibited before semicolon Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-07spi/tegra20-slink: Remove unused is_single_xfer checkMark Brown
Currently transfer_one_message() checks to see if the message consists of a single spi_transfer and tells _start_transfer_one() but it just ignores this. Don't bother. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
2013-09-26spi: tegra20-slink: use devm_spi_register_master()Jingoo Han
Use devm_spi_register_master() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17spi: tegra: Use DIV_ROUND_UP instead of open codedAxel Lin
This also makes the intention more clear. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29spi/tegra20-slink: Use core runtime PMMark Brown
Signed-off-by: Mark Brown <broonie@linaro.org> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2013-07-29spi/tegra-slink: Factor runtime PM out into transfer prepare/unprepareMark Brown
Currently the tegra slink driver acquires a runtime PM reference for the duration of each transfer. This may result in the IP being powered down between transfers which would be at best wasteful. Instead it is better to do this in the callbacks that are generated before and after starting a series of transfers, keeping the IP powered throughout. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
2013-05-23spi: use platform_{get,set}_drvdata()Jingoo Han
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-08spi: tegra: slink: make local symbols staticWei Yongjun
Neither tegra20_spi_cdata nor tegra30_spi_cdata are used outside this file so they can, and should, be static. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-07spi/tegra-slink: assume CONFIG_OF, remove platform dataStephen Warren
Tegra only supports, and always enables, device tree. Remove all ifdefs and runtime checks for DT support from the driver. Platform data is therefore no longer required. Rework the driver to parse the device tree directly into struct tegra_slink_data. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/tegra-slink: remove redundant codeStephen Warren
There is no code to set spi->controller_data, and hence the HW CS logic can never trigger. Remove the unused code. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-03spi: tegra: slink: do prepare dma transfer with DMA_CTRL_ACK flagMark Brown
This reverts commit faa98f7ea6c720beec8a800c9ac6975f760467e2 which was applied in error due to discussion ending up in the wrong thread.
2013-04-01spi: tegra: slink: do not prepare dma transfer with DMA_CTRL_ACK flagLaxman Dewangan
Spi starts transfer using dma with DMA_CTRL_ACK which is not require becasue spi driver does not use completed dma_desc after transfer done and so it does not ack the dma descriptor. Removing the DMA_CTRL_ACK flag to avoid memory leak in dma driver. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01spi: remove unused variable in tegra_slink_read_rx_fifo_to_client_rxbuf()Wei Yongjun
The variable bits_per_word is initialized but never used otherwise, so remove the unused variable. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-By: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12spi: slink-tegra20: move runtime pm calls to transfer_one_messageLaxman Dewangan
The prepare_transfer_hardware() is called in atomic context and calling synchronous runtime pm calls can create scheduling deadlock. Therefore, in place of calling runtime PM calls from prepare/unprepare message transfer, calling this in transfer_one_message(). Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-21Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC-specific updates from Arnd Bergmann: "This is a larger set of new functionality for the existing SoC families, including: - vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850 - prima2 gains support for the "marco" SoC family, its SMP based cousin - tegra gains support for the new Tegra4 (Tegra114) family - socfpga now supports a newer version of the hardware including SMP - i.mx31 and bcm2835 are now using DT probing for their clocks - lots of updates for sh-mobile - OMAP updates for clocks, power management and USB - i.mx6q and tegra now support cpuidle - kirkwood now supports PCIe hot plugging - tegra clock support is updated - tegra USB PHY probing gets implemented diffently" * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits) ARM: prima2: remove duplicate v7_invalidate_l1 ARM: shmobile: r8a7779: Correct TMU clock support again ARM: prima2: fix __init section for cpu hotplug ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3) ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3) arm: socfpga: Add SMP support for actual socfpga harware arm: Add v7_invalidate_l1 to cache-v7.S arm: socfpga: Add entries to enable make dtbs socfpga arm: socfpga: Add new device tree source for actual socfpga HW ARM: tegra: sort Kconfig selects for Tegra114 ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114 ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC ARM: tegra: Fix build error for gic update ARM: tegra: remove empty tegra_smp_init_cpus() ARM: shmobile: Register ARM architected timer ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move ARM: shmobile: r8a7779: Correct TMU clock support ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles ARM: mxs: use apbx bus clock to drive the timers on timrotv2 ...
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-05spi/tegra: remove checks for valid speedLaxman Dewangan
SPI core make sure that all transfer has proper speed set before calling low level spi transfer. Hence, it is not require to have check in spi driver. Remove the check for speed validity from transfer and use it directly. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05spi: remove check for bits_per_word on transfer from low level driverLaxman Dewangan
The spi core make sure that each transfer structure have the proper setting for bits_per_word before calling low level transfer APIs. Hence it is no more require to check again in low level driver for this field whether this is set correct or not. Removing such code from low level driver. The txx9 change also removes a test for bits_per_word set to 0, and forcing it to 8 in that case. This can also be removed now since spi_setup() ensures spi->bits_per_word is not zero. if (!spi->bits_per_word) spi->bits_per_word = 8; Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-01-28spi: tegra: do not use clock name to get clockPrashant Gaikwad
Since Tegra spi devices do not have multiple clocks, no need to use clock name to get the clock. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28ARM: tegra: migrate to new clock codePrashant Gaikwad
Migrate Tegra clock support to drivers/clk/tegra, this involves moving: 1. definition of tegra_cpu_car_ops to clk.c 2. definition of reset functions to clk-peripheral.c 3. change parent of cpu clock. 4. Remove legacy clock initialization. 5. Initialize clocks using DT. 6. Remove all instance of mach/clk.h Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: use to_clk_periph_gate().] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-25spi: Convert to devm_ioremap_resource()Thierry Reding
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-07spi: Remove HOTPLUG section attributesGrant Likely
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Bill Pemberton has done most of the legwork on this series. I've used his script to purge the attributes from the drivers/gpio tree. Reported-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-09spi: tegra: sequence compatible strings as per preferenceLaxman Dewangan
Sequence compatible list for tegra20-slink driver to first look for Tegra30 and then Tegra20. Tegra30 have additional feature in HW which need to be utilize if it is provided from DT. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-09spi: make sure all transfer has bits_per_word setLaxman Dewangan
When spi client does the spi transfer and does not sets the bits_per_word for each transfer then set it as default of spi device in spi core before calling low level transfer. Removing the similar code from spi-tegra20-slink driver as it is not required. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-30spi: tegra: add spi driver for SLINK controllerLaxman Dewangan
Tegra20/Tegra30 supports the spi interface through its SLINK controller. Add spi driver for SLINK controller. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 14:14:00 +0000