summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-sh-msiof.c
AgeCommit message (Collapse)Author
2013-12-02spi: spi-sh-msiof: set hi/low Active for HW CSTakashi Yoshii
Set hardware CS(CS control function on MSIOF <-> GPIO CS) polarity according to SPI_CS_HIGH flag on spi->mode. Signed-off-by: Takashi Yoshii <takasi-y@ops.dti.ne.jp> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-02spi: spi-sh-msiof: round up div to fix freq calculationTakashi Yoshii
Truncation on integer division in sh_msiof_spi_set_clk_regs() results in insufficient transfer frequency (> max_speed_freq). For example, source 52MHz, required max 6MHz 52/6 = 8.6 --> 8, then 1/8 table selected, and result in 52/8 = 6.5 MHz (>6MHz) Rounding it up is a simple solution. 52/6 = 8.6 --> 9, then 1/16 table selected, and result in 52/16 = 3.25 MHz Signed-off-by: Takashi Yoshii <takasi-y@ops.dti.ne.jp> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-28spi: sh-msiof: Convert to clk_prepare/unprepareLaurent Pinchart
Get the driver ready for the migration to the common clock framework by calling clk_prepare() and clk_unprepare(). The calls are added in the probe and remove handlers as the clk_enable() and clk_disable() calls are located in atomic context and there's no callback function in non-atomic context that can be used to prepare/unprepare the clock. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-28spi: sh-msiof: Use devm_* managed allocatorsLaurent Pinchart
This simplifies error and cleanup code paths. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-27spi: sh-msiof: Fix warnings due to improper castsLaurent Pinchart
Cast pointers to uintptr_t instead of unsigned int. This fixes warnings on platforms where pointers have a different size than int. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-15tree-wide: use reinit_completion instead of INIT_COMPLETIONWolfram Sang
Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-01Merge remote-tracking branch 'spi/topic/sh-msiof' into spi-nextMark Brown
2013-08-29spi: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-28spi/sh-msiof: Remove unneeded empty runtime PM callbacksMark Brown
Previously the runtime PM API insisted on having callbacks for everything but this requirement was removed a while ago so the empty callbacks can also be removed. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-04-01spi: spi-sh-msiof: Use of_match_ptr() macroSachin Kamat
This eliminates having an #ifdef returning NULL for the case when OF is disabled. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-05spi/sh-msiof: Add device tree parsing to driverBastian Hecht
This adds the capability to retrieve setup data from the device tree node. The usage of platform data is still available. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-06spi/sh-msiof: Remove unneeded clock nameBastian Hecht
clk_get() no longer needs a character string for associating the right clock as this is done via the device struct now. Signed-off-by: Bastian Hecht <hechtb@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-31spi: Add module.h to implicit users in drivers/spiPaul Gortmaker
We are clipping down the presence of module.h, since it was everywhere. If you really need it, you better call it out, as per this changeset. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-25drivercore: Add helper macro for platform_driver boilerplateGrant Likely
For simple modules that contain a single platform_driver without any additional setup code then ends up being a block of duplicated boilerplate. This patch adds a new macro, module_platform_driver(), which replaces the module_init()/module_exit() registrations with template functions. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Reviewed-by: Magnus Damm <magnus.damm@gmail.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2011-10-24spi: irq: Remove IRQF_DISABLEDYong Zhang
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-06spi: reorganize driversGrant Likely
Sort the SPI makefile and enforce the naming convention spi_*.c for spi drivers. This change also rolls the contents of atmel_spi.h into the .c file since there is only one user of that particular include file. v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be be the predominant pattern for subsystem prefixes. - Clean up filenames in Kconfig and header comment blocks Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 04:47:14 +0000