summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-s3c64xx.c
AgeCommit message (Collapse)Author
2020-10-02spi: spi-s3c64xx: Turn on interrupts upon resumeŁukasz Stelmach
s3c64xx_spi_hwinit() disables interrupts. In s3c64xx_spi_probe() after calling s3c64xx_spi_hwinit() they are enabled with the following call. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Link: https://lore.kernel.org/r/20201002122243.26849-10-l.stelmach@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-02spi: spi-s3c64xx: Increase transfer timeoutŁukasz Stelmach
Increase timeout by 30 ms for some wiggle room and set the minimum value to 100 ms. This ensures a non-zero value for short transfers which may take less than 1 ms. The timeout value does not affect performance because it is used with a completion. Similar formula is used in other drivers e.g. sun4i, sun6i. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Link: https://lore.kernel.org/r/20201002122243.26849-9-l.stelmach@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-02spi: spi-s3c64xx: Ensure cur_speed holds actual clock valueŁukasz Stelmach
Make sure the cur_speed value used in s3c64xx_enable_datapath() to configure DMA channel and in s3c64xx_wait_for_*() to calculate the transfer timeout is set to the actual value of (half) the clock speed. Don't change non-CMU case, because no frequency calculation errors have been reported. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Suggested-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Link: https://lore.kernel.org/r/20201002122243.26849-8-l.stelmach@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-02spi: spi-s3c64xx: Fix doc comment for struct s3c64xx_spi_driver_dataŁukasz Stelmach
Remove descriptions for non-existent fields and fix indentation. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Link: https://lore.kernel.org/r/20201002122243.26849-7-l.stelmach@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-02spi: spi-s3c64xx: Rename S3C64XX_SPI_SLAVE_* to S3C64XX_SPI_CS_*Łukasz Stelmach
Rename S3C64XX_SPI_SLAVE_* to S3C64XX_SPI_CS_* to match documentation. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201002122243.26849-6-l.stelmach@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-02spi: spi-s3c64xx: Report more information when errors occurŁukasz Stelmach
Report amount of pending data when a transfer stops due to errors. Report if DMA was used to transfer data and print the status code. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Link: https://lore.kernel.org/r/20201002122243.26849-5-l.stelmach@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-02spi: spi-s3c64xx: Check return valuesŁukasz Stelmach
Check return values in prepare_dma() and s3c64xx_spi_config() and propagate errors upwards. Fixes: 788437273fa8 ("spi: s3c64xx: move to generic dmaengine API") Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Link: https://lore.kernel.org/r/20201002122243.26849-4-l.stelmach@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-02spi: spi-s3s64xx: Add S3C64XX_SPI_QUIRK_CS_AUTO for Exynos3250Łukasz Stelmach
Fix issues with DMA transfers bigger than 512 bytes on Exynos3250. Without the patches such transfers fail. The vendor kernel for ARTIK5 handles CS in a simmilar way. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201002122243.26849-3-l.stelmach@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-02spi: spi-s3c64xx: swap s3c64xx_spi_set_cs() and s3c64xx_enable_datapath()Łukasz Stelmach
Fix issues with DMA transfers bigger than 512 bytes on Exynos3250. Without the patches such transfers fail to complete. This solution to the problem is found in the vendor kernel for ARTIK5 boards based on Exynos3250. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Link: https://lore.kernel.org/r/20201002122243.26849-2-l.stelmach@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17spi: spi-s3c64xx: Add missing entries for structs 's3c64xx_spi_dma_data' and ↵Lee Jones
's3c64xx_spi_dma_data' Fixes the following W=1 kernel build warning(s): drivers/spi/spi-s3c64xx.c:150: warning: Function parameter or member 'quirks' not described in 's3c64xx_spi_port_config' drivers/spi/spi-s3c64xx.c:150: warning: Function parameter or member 'clk_ioclk' not described in 's3c64xx_spi_port_config' drivers/spi/spi-s3c64xx.c:189: warning: Function parameter or member 'pdev' not described in 's3c64xx_spi_driver_data' drivers/spi/spi-s3c64xx.c:189: warning: Function parameter or member 'rx_dma' not described in 's3c64xx_spi_driver_data' drivers/spi/spi-s3c64xx.c:189: warning: Function parameter or member 'tx_dma' not described in 's3c64xx_spi_driver_data' drivers/spi/spi-s3c64xx.c:189: warning: Function parameter or member 'port_conf' not described in 's3c64xx_spi_driver_data' drivers/spi/spi-s3c64xx.c:189: warning: Function parameter or member 'port_id' not described in 's3c64xx_spi_driver_data' Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Andi Shyti <andi@etezian.org> Cc: Jaswinder Singh <jassi.brar@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Link: https://lore.kernel.org/r/20200717135424.2442271-8-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15spi: s3c64xx: Use dma_request_chan() directly for channel requestPeter Ujfalusi
dma_request_slave_channel_reason() is: #define dma_request_slave_channel_reason(dev, name) \ dma_request_chan(dev, name) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Andi Shyti <andi@etezian.org> Link: https://lore.kernel.org/r/20191113094256.1108-8-peter.ujfalusi@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-17spi: spi-s3c64xx: Fix system resume supportMarek Szyprowski
Since Linux v4.10 release (commit 1d9174fbc55e "PM / Runtime: Defer resuming of the device in pm_runtime_force_resume()"), pm_runtime_force_resume() function doesn't runtime resume device if it was not runtime active before system suspend. Thus, driver should not do any register access after pm_runtime_force_resume() without checking the runtime status of the device. To fix this issue, simply move s3c64xx_spi_hwinit() call to s3c64xx_spi_runtime_resume() to ensure that hardware is always properly initialized. This fixes Synchronous external abort issue on system suspend/resume cycle on newer Exynos SoCs. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-04-25spi: s3c64xx: samsung: Remove support for Exynos5440Krzysztof Kozlowski
The Exynos5440 is not actively developed, there are no development boards available and probably there are no real products with it. Remove wide-tree support for Exynos5440. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-18spi: spi-s3c64xx: Allow higher transfer lengths in polling IO modeSylwester Nawrocki
Some variants of the SPI controller have no DMA support, in such case SPI transfers longer than the FIFO length are not currently properly handled by the driver. Fix it by doing multiple transfers in the s3c64xx_spi_transfer_one() function if the SPI transfer length exceeds the FIFO size. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Andi Shyti <andi@etezian.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-18spi: spi-s3c64xx: Use local variable for FIFO lengthSylwester Nawrocki
More references to fifo_len are added in subsequent patch. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Andi Shyti <andi@etezian.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-18spi: spi-s3c64xx: Add missing s3c64xx_ prefix to function namesSylwester Nawrocki
Add a s3c64xx_ prefix to remaining generic function names so it is clear the code is part of the driver when grepping or looking at debug logs. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Andi Shyti <andi@etezian.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-18spi: spi-s3c64xx: Drop unused enable_datapath() function argumentSylwester Nawrocki
The spi pointer argument is not used now so remove it. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Andi Shyti <andi@etezian.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-17spi: spi-s3c64xx: Fix indentation in the register offset definitionsSylwester Nawrocki
Change indentation so register address offset and register bit definitions are aligned to same column. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Andi Shyti <andi@etezian.org> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-17spi: spi-s3c64xx: Do not ignore timeout errors in polling I/O modeSylwester Nawrocki
Currently timeout errors in polling I/O mode transfer are silently ignored. Fix it by returning an error when we time out waiting on the RX FIFO level to reach the transfer length. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Andi Shyti <andi@etezian.org> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-17spi: spi-s3c64xx: Remove unused s3c64xx_spi_hwinit() function argumentSylwester Nawrocki
The channel argument is not used and anyway it could be retrieved from the passed driver data structure. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Andi Shyti <andi@etezian.org> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-17spi: spi-s3c64xx: Remove unused driver data structure tgl_spi fieldSylwester Nawrocki
The tgl_spi pointer is now unused so remove it. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Andi Shyti <andi@etezian.org> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08spi: s3c64xx: add SPDX identifierAndi Shyti
Replace the original license statement with the SPDX identifier. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-03spi: s3c64xx: remove redundant pointer sciColin Ian King
The pointer sci is assigned but never read, hence it is redundant and can be removed. Cleans up clang warning: drivers/spi/spi-s3c64xx.c:791:2: warning: Value stored to 'sci' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-19Merge remote-tracking branches 'spi/topic/rockchip', 'spi/topic/rspi', ↵Mark Brown
'spi/topic/s3c64xx', 'spi/topic/sh-msiof' and 'spi/topic/slave' into spi-next
2017-02-13spi: s3c64xx: fix inconsistency between binding and driverAndi Shyti
Commit a92e7c3d82a1 ("spi: s3c64xx: consider the case when the CS line is not connected") introduced an inconsistency between the binding, where the disconnected CS line was marked as 'no-cs-readback', and the driver. The driver is erroneously checking for that attribute with property name of 'broken-cs'. Check for 'no-cs-readback' in the driver as well. Fixes: a92e7c3d82a1 ("spi: s3c64xx: consider the case when the CS line is not connected") Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2017-01-17spi: s3c64xx: potential oops on probe errorDan Carpenter
We accidentally mixed up freeing the rx and tx channels which would a leak and an oops. Fixes: 3d63a47a380a ("spi: s3c64xx: Don't request/release DMA channels for each SPI transfer") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-09spi: s3c64xx: Don't request/release DMA channels for each SPI transferMarek Szyprowski
Requesting a DMA channel might be a time consuming operation, so there is no need to acquire and release DMA channel for each SPI transfer. DMA channels can be requested during driver probe and kept all the time, also because there are no shared nor dynamically allocated channels on Samsung S3C/S5P/Exynos platforms. While moving dma_requrest_slave_channel calls, lets switch to dma_request_slave_channel_reason(), which returns error codes on failure, which can be properly propagated to the caller (this for example defers SPI probe when DMA controller is not yet available). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Tested-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-17spi: s3c64xx: Do not use platform_data for DMA parametersSylwester Nawrocki
All related platforms use either devicetree or the DMA slave map API for mapping DMA channels to DMA slaves so we can now stop using platform_data for passing DMA details. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Andi Shyti <andi.shyti@samsung.com> Tested-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-14spi: s3c64xx: restore removed commentsAndi Shyti
Patch a9e93e8 has erroneously removed some comments which are important to understand why the bus frequency is multiplied by two during the spi transfer. Reword the previous comment to a more appropriate message. Suggested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14spi: s3c64xx: add Exynos5433 compatible for ioclk handlingAndi Shyti
The new compatible is related to the Samsung Exynos5433 SoC. The difference between the previous is that in the exynos5433 the SPI controller is driven by three clocks instead of only one. The new clock (ioclk) is controlling the input/output clock whenever the controller is slave or master. The presence of the clock line is detected from the compatibility structure (exynos5433_spi_port_config) as a boolean value. The probe function checks whether the ioclk is present and if so, it acquires. The runtime suspend and resume functions will handle the clock enabling and disabling as well. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Michael Turquette <mturquette@baylibre.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14spi: s3c64xx: use error code from clk_prepare_enable()Andi Shyti
If clk_prepare_enable() fails do not return -EBUSY but use the value provided by the function itself. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Michael Turquette <mturquette@baylibre.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14spi: s3c64xx: rename goto labels to meaningful namesAndi Shyti
The goto labels of the style of err4: err3: err2: err1: are complex to insert in between new errors without renaming all the goto statements. Replace the errX naming style to meaningful names in order to make it easier to insert new goto exit points. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14spi: s3c64xx: fix reference leak to master in s3c64xx_spi_remove()Wei Yongjun
Once a spi_master_get() call succeeds, we need an additional spi_master_put() call to free the memory, otherwise we will leak a reference to master. Fix by removing the unnecessary spi_master_get() call. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-07spi: s3c64xx: do not disable the clock while configuring the spiAndi Shyti
When the clock is coming from the cmu it is not required to be disabled and then re-enabled in order to change the rate. Besides, some exynos chipsets (e.g. exynos5433) do not deliver any to the SFR if one from the pclk ("spi" in this case) or sclk ("busclk") is disabled. Remove the clock disabling/enabling to avoid falling into this situation. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-04spi: s3c64xx: indent an if statementDan Carpenter
It generates a static checker warning if an if statement isn't indented. I think the code is fine except for the white space issue. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-29spi: s3c64xx: simplify if statement in prepare_transfer functionAndi Shyti
The whole function is inside an 'if' statement ("!is_polling(sdd)"). Check the opposite of that statement at the beginning and exit, this way we can have one level less of indentation. Remove the goto paths as they are redundant. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-29spi: s3c64xx: do not configure the device twiceAndi Shyti
At the start of the transfer, the spi_config function is called twice, the first time when the 3c64xx_spi_prepare_message is called and the second time with the s3c64xx_spi_transfer_one, both called from the spi framework. Remove the first call at the prepare message because in that point we don't have the imformation about "bit per word" and frequency. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-29spi: s3c64xx: consider the case when the CS line is not connectedAndi Shyti
When the CS line is not connected, it is not needed to enable or disable the chip selection functionality from the s3c64xx devices in order to perform a transfer. Set the CS controller logically always enabled already during initialization (by writing '0' in the S3C64XX_SPI_SLAVE_SEL register) and never disable it. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-29spi: s3c64xx: group the CS signalling writes in a single functionAndi Shyti
To enable/disable the CS line, the driver performs a writel in the S3C64XX_SPI_SLAVE_SEL registers. Group the register's configuration in a single function. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-30spi: s3c64xx: Remove unused platform_device_id entriesSylwester Nawrocki
s5pv210 and exynos4 are now DT only platforms hence these entries can now be safely removed from the match table. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-18spi: s3c64xx: pass DMA arguments in platform dataArnd Bergmann
The s3c64xx platform data already contains a pointer to the DMA filter function, but not to the associated data. This simplifies the code and makes it more generic by passing the data along with the filter function like we do for other drivers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-16spi: s3c64xx: Use transfer speed unconditionallyJarkko Nikula
SPI core validates the transfer speed and defaults to spi->max_speed_hz in case the transfer speed is not set. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-14spi: s3c64xx: replace clock disabling with runtime PM suspend call in remove ↵Heiner Kallweit
function Simplify s3c64xx_spi_remove by replacing the clock disabling with calling runtime PM suspend which does the same. Waking up the device if it was suspended wouldn't be strictly needed for this driver but using pm_runtime_get_sync is cleaner and makes s3c64xx_spi_remove more consistent with the runtime PM handling in s3c64xx_spi_setup. pm_runtime_force_suspend does most of the work for us: disabling the clocks, disabling runtime PM and setting it to "suspended" state. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-14spi: s3c64xx: simplify suspend / resume handlersHeiner Kallweit
The runtime PM suspend / resume handlers take care of the enabling/ disabling the clocks already. Therefore replace the duplicated clock handling with pm_runtime_force_suspend/resume. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-14spi: s3c64xx: extend driver to make full use of runtime PM autosuspendHeiner Kallweit
Extend the driver to make full use of runtime PM autosuspend. Before only the SPI core was instructed to use autosuspend by setting master->auto_runtime_pm. Nevertheless due to the missing pm_runtime_use_autosuspend call autosuspend wasn't active. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-14spi: s3c64xx: clean up runtime PM if driver registration failsHeiner Kallweit
Fix missing runtime PM cleanup if driver registration fails. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-28spi: s3c64xx: print fifo size on probe.Michal Suchanek
Printing the FIFO depth does not add much noise in the log and can be useful for debugging transfer issues. Signed-off-by: Michal Suchanek <hramrach@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-01spi: s3c64xx: Constify platform_device_idKrzysztof Kozlowski
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-24spi: s3c64xx: fix compiler warning in spi-s3c64xxAndre Przywara
The Exynos 7 arm64 support now allows the S3C64xx SPI driver to be compiled into an ARM64 kernel, so the cast from the [rt]x_dmach int variable to a void* in this driver now triggers a warning. Add a long cast to silence the compiler. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22spi: Remove FSF mailing addressesJarkko Nikula
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 19:40:37 +0000