summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-omap2-mcspi.c
AgeCommit message (Collapse)Author
2015-05-25spi: omap2-mcspi: Handle error on gpio_requestMichael Welling
If a valid GPIO is specified but cannot be requested by the driver, print a message and error out of omap2_mcspi_setup. Signed-off-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-25spi: omap2-mcspi: Fix GPIO chip select supportMichael Welling
The OMAP2_MCSPI_CHCONF_FORCE must be toggled even when using GPIO chip selects. This patch conditionally calls the omap2_mcspi_set_cs function to do so when using GPIO chip selects. Signed-off-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-25spi: omap2-mcspi: Fix set_cs function for active highMichael Welling
The core spi driver swaps the polarity of the enable based on SPI_CS_HIGH. The omap2 controller has an internal configuration register bit called OMAP2_MCSPI_CHCONF_EPOL to handle active high chip selects as well. So we have to revert swap the polarity back for the correct setting of the OMAP2_MCSPI_CHCONF_FORCE bit in omap2_mcspi_set_cs. Signed-off-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-25spi: omap2-mcspi: Remove unnecessary delayMichael Welling
The core spi driver handles the delay between transactions. This is a remanant from the transfer_one conversion. Signed-off-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12spi: omap2-mcspi: Fix native cs with new set_csMichael Welling
GPIO chip select patch series appears to have broken the native chip select support. This patch pulls the manual native chip select toggling out of the transfer_one routine and adds a set_cs routine. Tested natively on AM3354 with SPI serial flash on spi0cs0. Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Michael Welling <mwelling@ieee.org> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-08spi: omap2-mcspi: Add gpio_request and init CSMichael Welling
If GPIO chip select is specified, request the GPIO in the setup function and release it in the cleanup function. Signed-off-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-08spi: omap2-mcspi: Switch driver to use transfer_oneMichael Welling
Switches from transfer_one_message to transfer_one to prepare driver for use of GPIO chip selects. Signed-off-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-24spi/omap2-mcpsi: Always call spi_finalize_current_message()Fionn Cleary
The spi queue waits forever for spi_finalize_current_message() to be called, blocking the bus. Ensure that all error paths from omap2_mcspi_transfer_one_message() call spi_finalize_current_message(). Signed-off-by: Fionn Cleary <fionn.cleary@streamunlimited.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22spi: Remove FSF mailing addressesJarkko Nikula
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20spi: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-08-11spi/omap-mcspi: Fix the spi task hangs waiting dma_rxJorge A. Ventura
The spi hangs waiting the completion of omap2_mcspi_rx_callback. Signed-off-by: Jorge A. Ventura <jorge.araujo.ventura@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-07-03spi: omap2-mcspi: Configure hardware when slave driver changes modeMark A. Greer
Commit id 2bd16e3e23d9df41592c6b257c59b6860a9cc3ea (spi: omap2-mcspi: Do not configure the controller on each transfer unless needed) does its job too well so omap2_mcspi_setup_transfer() isn't called even when an SPI slave driver changes 'spi->mode'. The result is that the mode requested by the SPI slave driver never takes effect. Fix this by adding the 'mode' member to the omap2_mcspi_cs structure which holds the mode value that the hardware is configured for. When the SPI slave driver changes 'spi->mode' it will be different than the value of this new member and the SPI master driver will know that the hardware must be reconfigured (by calling omap2_mcspi_setup_transfer()). Fixes: 2bd16e3e23 (spi: omap2-mcspi: Do not configure the controller on each transfer unless needed) Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-04-10Merge remote-tracking branches 'spi/fix/complete', 'spi/fix/efm32', ↵Mark Brown
'spi/fix/omap2-mcspi' and 'spi/fix/qup' into spi-linus
2014-04-03spi: omap2-mcspi: Convert to use devm_kcallocAxel Lin
This saves a few unwind code and return proper error if devm_kcalloc fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-30Merge remote-tracking branches 'spi/topic/omap-uwire', 'spi/topic/omap100k', ↵Mark Brown
'spi/topic/omap2', 'spi/topic/orion', 'spi/topic/pl022', 'spi/topic/qup', 'spi/topic/rspi' and 'spi/topic/s3c24xx' into spi-next
2014-02-19spi: omap2-mcspi: Convert to let spi core validate transfer speedAxel Lin
Set master->max_speed_hz and master->min_speed_hz then spi core will handle checking transfer speed. So we can remove the same checking in this driver. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-19spi: omap2-mcspi: Remove list_empty checking in omap2_mcspi_transfer_one_messageAxel Lin
This checking is done in __spi_validate(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03spi: omap2-mcspi: Support divide-by-n clock dividersStefan Sørensen
Currently a divide-by-2^n clock is used, causing a very coarse clock selection, i.e. a 10MHz device will need to use a 6MHz clock. The McSPI can also use a divide-by-n clock, this patch adds support for selecting that when possible. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03spi: omap2-mcspi: Do not configure the controller on each transfer unless neededStefan Sørensen
spi_transfer->speed_hz and spi_transfer->bits_per_word used to only be set when not using the default settings but are not set on every transfer, causing omap2_mcspi_setup_transfer to be called on each transfer. This patch changes the check to only call omap2_mcspi_setup_transfer if the settings needs to be changed. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03spi: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-24spi: omap2-mcspi: raw read and write endian fixVictor Kamensky
All OMAP IP blocks expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_read[lw] and __raw_write[lw] functions code need to use read[lw]_relaxed and write[lw]_relaxed functions. If the first simply reads/writes register, the second will byteswap it if host operates in BE mode. Changes are trivial sed like replacement of __raw_xxx functions with xxx_relaxed variant. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-25Merge remote-tracking branch 'spi/topic/bfin' into spi-nextMark Brown
2013-10-25Merge remote-tracking branch 'spi/topic/atmel' into spi-nextMark Brown
2013-10-16spi: Add missing newline to dev_ prints in driversJarkko Nikula
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-09spi: omap2-mcspi: Fix FIFO support for transmit-and-receive modeIllia Smyrnov
This patch fixes MCSPI FIFO buffer support when transmit-and-receive (full duplex) mode is used. In this mode FIFO can be used for RX or for TX or for both directions. If FIFO used for both directions the buffer is split into two 32-byte buffers - one for each direction. Also for full duplex mode both AEL and AFL need to be set in CHCONF0 register. Signed-off-by: Illia Smyrnov <illia.smyrnov@globallogic.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-26spi: omap2-mcspi: use devm_spi_register_master()Jingoo Han
Use devm_spi_register_master() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-01Merge remote-tracking branch 'spi/topic/qspi' into spi-nextMark Brown
2013-08-29spi: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29spi/omap2: Covert to core runtime PMMark Brown
Signed-off-by: Mark Brown <broonie@linaro.org> Reviewed-by: Felipe Balbi <balbi@ti.com>
2013-06-26Merge remote-tracking branch 'spi/topic/pdata' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/topic/omap' into spi-nextMark Brown
2013-06-24spi: omap2-mcspi: convert to dma_request_slave_channel_compat()Matt Porter
Convert dmaengine channel requests to use dma_request_slave_channel_compat(). This supports the DT case of platforms requiring channel selection from either the OMAP DMA or the EDMA engine. AM33xx only boots from DT and is the only user implementing EDMA so in the !DT case we can default to the OMAP DMA filter. Signed-off-by: Matt Porter <mporter@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Joel A Fernandes <joelagnel@ti.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-17spi: omap2-mcspi: Add FIFO buffer supportIllia Smyrnov
The MCSPI controller has a built-in FIFO buffer to unload the DMA or interrupt handler and improve data throughput. This patch adds FIFO buffer support for SPI transfers in DMA mode. For SPI transfers in DMA mode, the largest possible FIFO buffer size will be calculated and set up. The FIFO won't be used for the SPI transfers in DMA mode if: calculated FIFO buffer size is less then 2 bytes or the FIFO buffer size isn't multiple of the SPI word length. Signed-off-by: Illia Smyrnov <illia.smyrnov@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-17spi: omap2-mcspi: Move bytes per word calculation to the functionIllia Smyrnov
Introduce mcspi_bytes_per_word function as replacement for the next code fragment: int c = (word_len <= 8) ? 1 : (word_len <= 16) ? 2 : /* word_len <= 32 */ 4; This code used 2 times in current driver code and will be used 2 times in the next FIFO buffer support patch. Replace it with inline function with clear name to improve code legibility. Signed-off-by: Illia Smyrnov <illia.smyrnov@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-05-29spi: convert drivers to use bits_per_word_maskStephen Warren
Fill in the recently added spi_master.bits_per_word_mask field in as many drivers as possible. Make related cleanups, such as removing any redundant error-checking, or empty setup callbacks. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-23spi: use platform_{get,set}_drvdata()Jingoo Han
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-13spi/omap2: Let device core handle pinctrlMark Brown
Since commit ab78029 (drivers/pinctrl: grab default handles from device core) we can rely on device core for handling pinctrl so remove devm_pinctrl_get_select_default() from the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-18spi: omap2-mcspi: fix error return code in omap2_mcspi_probe()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-15spi: omap2-mcspi: Fix transfers if DMADEVICES is not setTony Lindgren
Selecting CONFIG_DMADEVICES is optional, and we must be able to continue even without DMA. Otherwise things like omap4430sdp nfsroot will fail if DMA is not selected. Note that the driver already supports PIO mode, but we fail to fall back to PIO if requesting DMA channels fails. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01spi/omap-mcspi: check condition also after timeoutSebastian Andrzej Siewior
It is possible that the handler gets interrupted after checking the status. After it resumes the time out is due but the condition it was waiting for might be true as well. Therefore it is necessary to check the condition in case of an time out to be sure that the condition is not true after the time passed by. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-05Merge branch 'broonie/spi-next' of ↵Grant Likely
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc.git Minor features and bug fixes for PXA, OMAP and GPIO deivce drivers and a cosmetic change to the bitbang driver. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05spi/omap2: disable DMA requests before complete()Felipe Balbi
No actual errors have been found for completing before disabling DMA request lines, but it just looks more semantically correct that on our DMA callback we quiesce the whole thing before stating transfer is finished. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-01-26spi: spi-omap2-mcspi.c: Toggle CS after each wordMatthias Brugger
This patch allows the board code to define SPI devices which needs to toggle the chip select after every word send. This is needed to get a better resolution reading e.g. an ADC data stream. Apart from that, as in the normal code CS is controlled by software, a transfer is done much faster. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-26spi: spi-omap2-mcspi.c: fix coding styleMatthias Brugger
This patch fixes some indentation errors. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-25spi: Convert to devm_ioremap_resource()Thierry Reding
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-07spi: Remove HOTPLUG section attributesGrant Likely
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Bill Pemberton has done most of the legwork on this series. I've used his script to purge the attributes from the drivers/gpio tree. Reported-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-03spi: omap2-mcspi: remove duplicate inclusion of linux/err.hSachin Kamat
linux/err.h was included twice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-03spi: omap2-mcspi: Fix the redifine warningShubhrajyoti D
Fix the below warning drivers/spi/spi-omap2-mcspi.c:336:34: warning: symbol 'tx' shadows an earlier one drivers/spi/spi-omap2-mcspi.c:327:12: originally declared here So delete the u8 tx as it is assigned and not used(resigned afterwards). Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-14Merge branch 'spi-mcspi' into spi-nextMark Brown
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 18:16:36 +0000