summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-dw.c
AgeCommit message (Collapse)Author
2020-01-23Merge branch 'spi-5.6' into spi-nextMark Brown
2020-01-23Merge branch 'spi-5.5' into spi-linusMark Brown
2020-01-06spi: dw: use "smp_mb()" to avoid sending spi data errorXinwei Kong
Because of out-of-order execution about some CPU architecture, In this debug stage we find Completing spi interrupt enable -> prodrucing TXEI interrupt -> running "interrupt_transfer" function will prior to set "dw->rx and dws->rx_end" data, so this patch add memory barrier to enable dw->rx and dw->rx_end to be visible and solve to send SPI data error. eg: it will fix to this following low possibility error in testing environment which using SPI control to connect TPM Modules kernel: tpm tpm0: Operation Timed out kernel: tpm tpm0: tpm_relinquish_locality: : error -1 Signed-off-by: fengsheng <fengsheng5@huawei.com> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com> Link: https://lore.kernel.org/r/1578019930-55858-1-git-send-email-kong.kongxinwei@hisilicon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-06Merge tag 'spi-fix-v5.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A small collection of fixes here, one to make the newly added PTP timestamping code more accurate, a few driver fixes and a fix for the core DT binding to document the fact that we support eight wire buses" * tag 'spi-fix-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: Document Octal mode as valid SPI bus width spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent calls spi: spi-fsl-dspi: Fix 16-bit word order in 32-bit XSPI mode spi: Don't look at TX buffer for PTP system timestamping spi: uniphier: Fix FIFO threshold
2020-01-03spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent callswuxu.wu
dw_spi_irq() and dw_spi_transfer_one concurrent calls. I find a panic in dw_writer(): txw = *(u8 *)(dws->tx), when dw->tx==null, dw->len==4, and dw->tx_end==1. When tpm driver's message overtime dw_spi_irq() and dw_spi_transfer_one may concurrent visit dw_spi, so I think dw_spi structure lack of protection. Otherwise dw_spi_transfer_one set dw rx/tx buffer and then open irq, store dw rx/tx instructions and other cores handle irq load dw rx/tx instructions may out of order. [ 1025.321302] Call trace: ... [ 1025.321319] __crash_kexec+0x98/0x148 [ 1025.321323] panic+0x17c/0x314 [ 1025.321329] die+0x29c/0x2e8 [ 1025.321334] die_kernel_fault+0x68/0x78 [ 1025.321337] __do_kernel_fault+0x90/0xb0 [ 1025.321346] do_page_fault+0x88/0x500 [ 1025.321347] do_translation_fault+0xa8/0xb8 [ 1025.321349] do_mem_abort+0x68/0x118 [ 1025.321351] el1_da+0x20/0x8c [ 1025.321362] dw_writer+0xc8/0xd0 [ 1025.321364] interrupt_transfer+0x60/0x110 [ 1025.321365] dw_spi_irq+0x48/0x70 ... Signed-off-by: wuxu.wu <wuxu.wu@huawei.com> Link: https://lore.kernel.org/r/1577849981-31489-1-git-send-email-wuxu.wu@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-25Merge branch 'for-5.5' of ↵Mark Brown
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-5.6
2019-12-17Merge tag 'spi-fix-v5.5-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A relatively large set of fixes here, the biggest part of it is for fallout from the GPIO descriptor rework that affected several of the devices with usable native chip select support. There's also some new PCI IDs for Intel Jasper Lake devices. The conversion to platform_get_irq() in the fsl driver is an incremental fix for build errors introduced on SPARC by the earlier fix for error handling in probe in that driver" * tag 'spi-fix-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fsl: use platform_get_irq() instead of of_irq_to_resource() spi: nxp-fspi: Ensure width is respected in spi-mem operations spi: spi-ti-qspi: Fix a bug when accessing non default CS spi: fsl: don't map irq during probe spi: spi-cavium-thunderx: Add missing pci_release_regions() spi: sprd: Fix the incorrect SPI register gpiolib: of: Make of_gpio_spi_cs_get_count static spi: fsl: Handle the single hardwired chipselect case gpio: Handle counting of Freescale chipselects spi: fsl: Fix GPIO descriptor support spi: dw: Correct handling of native chipselect spi: cadence: Correct handling of native chipselect spi: pxa2xx: Add support for Intel Jasper Lake
2019-12-11spi: dw: Avoid BUG_ON() in case of host failureAditya Pakki
If dws is NULL in dw_spi_host_add(), we return the error to the upper callers instead of crashing. The patch replaces BUG_ON by returning -EINVAL to the caller. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Link: https://lore.kernel.org/r/20191205231421.9333-1-pakki001@umn.edu Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-28spi: dw: Correct handling of native chipselectCharles Keepax
This patch reverts commit 6e0a32d6f376 ("spi: dw: Fix default polarity of native chipselect"). The SPI framework always called the set_cs callback with the logic level it desired on the chip select line, which is what the drivers original handling supported. commit f3186dd87669 ("spi: Optionally use GPIO descriptors for CS GPIOs") changed these symantics, but only in the case of drivers that also support GPIO chip selects, to true meaning apply slave select rather than logic high. This left things in an odd state where a driver that only supports hardware chip selects, the core would handle polarity but if the driver supported GPIOs as well the driver should handle polarity. At this point the reverted change was applied to change the logic in the driver to match new system. This was then broken by commit 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH setting when using native and GPIO CS") which reverted the core back to consistently calling set_cs with a logic level. This fix reverts the driver code back to its original state to match the current core code. This is probably a better fix as a) the set_cs callback is always called with consistent symantics and b) the inversion for SPI_CS_HIGH can be handled in the core and doesn't need to be coded in each driver supporting it. Fixes: 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH setting when using native and GPIO CS") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191127153936.29719-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-22Merge branch 'spi-5.5' into spi-nextMark Brown
2019-11-05spi: dw: Fix Designware SPI loopbackThor Thayer
The SPI_LOOP is set in spi->mode but not propagated to the register. A previous patch removed the bit during a cleanup. Fixes: e1bc204894ea ("spi: dw: fix potential variable assignment error") Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Link: https://lore.kernel.org/r/1572985330-5525-1-git-send-email-thor.thayer@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-30spi: dw: Remove runtime PM enable/disable from common part of the driverJarkko Nikula
Committed version of the commit b9fc2d207e54 ("spi: dw: Move runtime PM enable/disable from common to platform driver part") does not include by some reason changes to drivers/spi/spi-dw.c that were part of the original patch sent to the mailing list. Complete the code move by doing those changes now. Fixes: b9fc2d207e54 ("spi: dw: Move runtime PM enable/disable from common to platform driver part") Cc: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20191030113137.15459-1-jarkko.nikula@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-01spi: dw: Add basic runtime PM supportPhil Edworthy
Enable runtime PM so that the clock used to access the registers in the peripheral is turned on using a clock domain. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Gareth Williams <gareth.williams.jx@renesas.com> Link: https://lore.kernel.org/r/1568793876-9009-4-git-send-email-gareth.williams.jx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20Merge branch 'for-5.0' of ↵Mark Brown
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-5.1
2019-01-24spi: dw: Fix default polarity of native chipselectLinus Walleij
The DW controller also supports platforms specifying native chipselects. When I enforce the use of high CS for drivers opting in for using GPIO descriptors, I inadvertedly switched the driver to also use active high chip select for native chip selects. As it turns out, the DW hardware driving chip selects also thinks it is weird with active low chip selects so all we need to do is remove an inversion in the driver. Cc: Jan Kotas <jank@cadence.com> Reported-by: Jan Kotas <jank@cadence.com> Tested-by: Jan Kotas <jank@cadence.com> Fixes: 9400c41e77b8 ("spi: dw: Convert to use CS GPIO descriptors") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-15spi: dw: change snprintf to scnprintf for possible overflowSilvio Cesare
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems. 1) Uses of size += snprintf(buf, SIZE - size, fmt, ...) In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf. 2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration. The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE. Signed-off-by: Silvio Cesare <silvio.cesare@gmail.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-10spi: dw: fix warning unused variable 'ret'Anders Roxell
When CONFIG_SPI_DESIGNWARE are enabled we see the unused variable warning in dw_spi_setup. ../drivers/spi/spi-dw.c: In function ‘dw_spi_setup’: ../drivers/spi/spi-dw.c:400:6: warning: unused variable ‘ret’ [-Wunused-variable] int ret; ^~~ Remove the unused varable. Fixes: 9400c41e77b8 ("spi: dw: Convert to use CS GPIO descriptors") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-09spi: dw: Convert to use CS GPIO descriptorsLinus Walleij
This converts the DesignWare (dw) SPI master driver to use GPIO descriptors for chip select handling. This driver has a duplicate DT parser in addition to the one in the core, sets up the line as non-asserted and relies on the core to drive the GPIOs. It is a pretty straight-forward conversion. Cc: Talel Shenhar <talel@amazon.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Linuxarm <linuxarm@huawei.com> Tested-by: Jay Fang <f.fangjian@huawei.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-07spi: dw: fix potential variable assignment errorshaftarger
spi::mode is defined by framework for several SPI capabilities, such as polarity, phase, bit-endian, wire number. Directly use this variable for setting controller's polarity and phase causes other bit in register being set. Since SPI framework has its definition, SPI_CPOL and SPI_CPHA offset may be changed by framwork change. Instead of just mask off the relevant bits, fetch required bit in spi::mode and set to register. Signed-off-by: shaftarger <shol@livemail.tw> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-04spi: dw-mmio: add ACPI supportJay Fang
The Hisilicon Hip08 platform, that uses ACPI, has this controller. Let's add ACPI support for DW SPI MMIO-based host. The ACPI ID used is "HISI0173" for the Designware SPI controller of Hisilicon Hip08 platform. Signed-off-by: Jay Fang <f.fangjian@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-11dw: spi: add support for Amazon's Alpine spi controllerTalel Shenhar
Add support for a new devicetree compatible string called 'amazon,alpine-apb-ssi', which is necessary for the Amazon Alpine spi controller. 'amazon,alpine-dw-apb-ssi' is used in the dw spi driver if specified in the devicetree. Otherwise, fall back to driver default behavior, i.e. original dw IP hw driver behavior. Signed-off-by: Talel Shenhar <talel@amazon.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-06spi: dw: support 4-16 bits per wordSimon Goldschmidt
The spi-dw driver currently only supports 8 or 16 bits per word. Since the hardware supports 4-16 bits per word, adapt the driver to also support this. Tested on socfpga cyclone5 with a 9-bit SPI display. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-05spi: Do not print a message if spi_controller_{suspend,resume}() failsGeert Uytterhoeven
spi_controller_{suspend,resume}() already prints an error message on failure, so there is no need to repeat this in individual drivers. Note: spi_master_{suspend,resume}() is an alias for spi_controller_{suspend,resume}(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Daniel Mack <daniel@zonque.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-10Merge branch 'spi-4.19' into spi-nextMark Brown
2018-07-30spi: dw: export dw_spi_set_csAlexandre Belloni
Export dw_spi_set_cs so it can be used from the various IP integration modules. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-18spi: dw: allow providing own set_cs callbackAlexandre Belloni
Allow platform specific drivers to provide their own set_cs callback when the IP integration requires it. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-18spi: dw: fix possible race conditionAlexandre Belloni
It is possible to get an interrupt as soon as it is requested. dw_spi_irq does spi_controller_get_devdata(master) and expects it to be different than NULL. However, spi_controller_set_devdata() is called after request_irq(), resulting in the following crash: CPU 0 Unable to handle kernel paging request at virtual address 00000030, epc == 8058e09c, ra == 8018ff90 [...] Call Trace: [<8058e09c>] dw_spi_irq+0x8/0x64 [<8018ff90>] __handle_irq_event_percpu+0x70/0x1d4 [<80190128>] handle_irq_event_percpu+0x34/0x8c [<801901c4>] handle_irq_event+0x44/0x80 [<801951a8>] handle_level_irq+0xdc/0x194 [<8018f580>] generic_handle_irq+0x38/0x50 [<804c6924>] ocelot_irq_handler+0x104/0x1c0 Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-12spi: dw: Convert to generalized SPI controller APIJarkko Nikula
Convert to generalized SPI controller API introduced by the commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller""). Inside driver variable name "master" is still used to indicate the driver is master only. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-26spi: dw: Remove unused members from struct chip_dataJarkko Nikula
Local struct chip_data has two members that are not used: - cs. Looks like was never used - enable_dma. Became unused by the commit f89a6d8f43eb ("spi: dw-mid: move to use core SPI DMA mappings"). Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-09spi: dw: Make debugfs use bus num and make irq name uniquePhil Reid
Instead of using device name it was suggested that bus number was more appropriate to differentiate debugfs names. Also reduce buffer size to more realistic 32 bytes instead of 128. When request_irq is called the bus number may not be assigned. Therefore the irq name was not unique when dynamic bus number was being used. As per most of the spi drivers use the device name instead. No other use of dws->name could be found so it was removed. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-31spi: dw: Make debugfs name unique between instancesPhil Reid
Some system have multiple dw devices. Currently the driver uses a fixed name for the debugfs dir. Append dev name to the debugfs dir name to make it unique. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-11spi: dw: Set GPIO_SS flag to toggle Slave Select on GPIO CSThor Thayer
The Designware SPI master requires slave selection before the transfer can begin [1]. This patch uses the new master flag to indicate both the GPIO CS and the internal chip select should be used. Tested On: Altera CycloneV development kit Compile tested for build errors on x86_64 (allyesconfigs) [1] DesignWare dw_apb_ssi Databook, Version 3.20a (page 39) Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: dw: round up result of calculation for clock dividerMatthias Seidel
Avoid ending up with a higher frequency than requested Signed-off-by: Matthias Seidel <kernel@mseidel.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-06spi: dw: fix multiple slaves with different baudratesMatthias Seidel
Add current master clock to dws struct and compare it against the requestedtransfer speed. Update clock divider only if necessary. Signed-off-by: Matthias Seidel <kernel@mseidel.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-23spi: dw: Use SPI_TMOD_TR rather than magic const 0 to set tmodeJisheng Zhang
The TMODE available value is well defined and documented in the header file. Use it and remove the comment. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-28spi: dw: replace magic constant by DW_SPI_DRAndy Shevchenko
The offset 0x60 is the offset of the data register defined as DW_SPI_DR in the header file. Use it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-20spi: dw: remove a NULL check when call ->remove()Andy Shevchenko
Currently all users aware about calling dw_spi_remove_host() with properly set parameter. Remove unneeded check. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-20spi: dw: explicitly free IRQ handler in dw_spi_remove_host()Andy Shevchenko
The following warning occurs when DW SPI is compiled as a module and it's a PCI device. On the removal stage pcibios_free_irq() is called earlier than free_irq() due to the latter is called at managed resources free strage. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1003 at /home/andy/prj/linux/fs/proc/generic.c:575 remove_proc_entry+0x118/0x150() remove_proc_entry: removing non-empty directory 'irq/38', leaking at least 'dw_spi1' Modules linked in: spi_dw_midpci(-) spi_dw [last unloaded: dw_dmac_core] CPU: 1 PID: 1003 Comm: modprobe Not tainted 4.3.0-rc5-next-20151013+ #32 00000000 00000000 f5535d70 c12dc220 f5535db0 f5535da0 c104e912 c198a6bc f5535dcc 000003eb c198a638 0000023f c11b4098 c11b4098 f54f1ec8 f54f1ea0 f642ba20 f5535db8 c104e96e 00000009 f5535db0 c198a6bc f5535dcc f5535df0 Call Trace: [<c12dc220>] dump_stack+0x41/0x61 [<c104e912>] warn_slowpath_common+0x82/0xb0 [<c11b4098>] ? remove_proc_entry+0x118/0x150 [<c11b4098>] ? remove_proc_entry+0x118/0x150 [<c104e96e>] warn_slowpath_fmt+0x2e/0x30 [<c11b4098>] remove_proc_entry+0x118/0x150 [<c109b96a>] unregister_irq_proc+0xaa/0xc0 [<c109575e>] free_desc+0x1e/0x60 [<c10957d2>] irq_free_descs+0x32/0x70 [<c109b1a0>] irq_domain_free_irqs+0x120/0x150 [<c1039e8c>] mp_unmap_irq+0x5c/0x60 [<c16277b0>] intel_mid_pci_irq_disable+0x20/0x40 [<c1627c7f>] pcibios_free_irq+0xf/0x20 [<c13189f2>] pci_device_remove+0x52/0xb0 [<c13f6367>] __device_release_driver+0x77/0x100 [<c13f6da7>] driver_detach+0x87/0x90 [<c13f5eaa>] bus_remove_driver+0x4a/0xc0 [<c128bf0d>] ? selinux_capable+0xd/0x10 [<c13f7483>] driver_unregister+0x23/0x60 [<c10bad8a>] ? find_module_all+0x5a/0x80 [<c1317413>] pci_unregister_driver+0x13/0x60 [<f80ac654>] dw_spi_driver_exit+0xd/0xf [spi_dw_midpci] [<c10bce9a>] SyS_delete_module+0x17a/0x210 Explicitly call free_irq() at removal stage of the DW SPI driver. Fixes: 04f421e7b0b1 (spi: dw: use managed resources) Cc: stable@vger.kernel.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19spi: dw: introduce spi_shutdown_chip()Andy Shevchenko
This helper disables SPI controller and sets clock to 0. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19spi: dw: eliminate unused threshold variablesAndy Shevchenko
The tx_threshold and rx_threshold variables are not used anywhere. Remove them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19spi: dw: eliminate speed variable in ->transfer_one()Andy Shevchenko
There is no point to have a separate variable for speed in ->transfer_one(). While here, remove !chip->clk_div from a condition since it is assigned simultaneously with chip->speed_hz. We can do this safely because a) transfer speed can't be higher than max_freq and therefore chip->clk_div can be 0 only when chip->speed_hz is 0, and b) transfer speed can't be 0, otherwise we will get division by zero exception. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19spi: dw: remove bits_per_word member of struct chip_dataAndy Shevchenko
There is no need to carry over spi->bits_per_word and Co from ->setup() in struct chip_data since ->transfer_one() will anyway take the transfer parameters from struct spi_transfer. This is since SPI core validates both bits_per_word transfer parameter and defaults to spi->bits_per_word in case that per transfer parameter is not set. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19spi: dw: remove unneeded cr0 member of struct chip_dataAndy Shevchenko
Since we recalculate cr0 each time we start a transfer the chip_data->cr0 becomes redundant. Remove it and related pieces. This is a follow up to commit 0ed36990a93b (spi: dw: Remove needless if statements). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19spi: dw: use plain struct device * at earlier ->probe()Andy Shevchenko
The name of the master device is set during registrationg which happens after we issue the error message. Change it to plain struct device * to see which device registration failed. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-17spi: dw: Remove test for non-zero spi->max_speed_hzJarkko Nikula
Test for non-zero spi->max_speed_hz in dw_spi_setup() looks needless as spi_setup() defaults to master->max_speed_hz in case it is not set. This drivers sets the master->max_speed_hz based on max_freq data passed to it via dw_spi_add_host() call. I suppose things have already fallen apart if dw_spi_mmio_probe() or spi_pci_probe() ever passes zero max_freq. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-17spi: dw: Remove needless if statementsJarkko Nikula
SPI core validates both bits_per_word and speed_hz transfer parameters and defaults to spi->bits_per_word and spi->max_speed_hz in case these per transfer parameters are not set. This allows to remove related if statements as they evaluate always to true and reduce indentation. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-21spi: dw: Allow interface drivers to limit data I/O to word sizesMichael van der Westhuizen
The commit dd11444327ce ("spi: dw-spi: Convert 16bit accesses to 32bit accesses") changed all 16bit accesses in the DW_apb_ssi driver to 32bit. This, unfortunately, breaks data register access on picoXcell, where the DW IP needs data register accesses to be word accesses (all other accesses appear to be OK). This change introduces a new master variable to allow interface drivers to specify that 16bit data transfer I/O is required. This change also introduces the ability to set this variable via device tree bindings in the MMIO interface driver. Both the core and the MMIO interface driver default to the current 32bit behaviour. Before this change, on a picoXcell pc3x3: spi_master spi32766: interrupt_transfer: fifo overrun/underrun m25p80 spi32766.0: error -5 reading 9f m25p80: probe of spi32766.0 failed with error -5 After this change: m25p80 spi32766.0: m25p40 (512 Kbytes) Fixes: dd11444327ce ("spi: dw-spi: Convert 16bit accesses to 32bit accesses") Signed-off-by: Michael van der Westhuizen <michael@smart-africa.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-25spi: dw: fix crash on setup stageAndy Shevchenko
The commit 1a7b7ee72c21 (spi: Ensure that CS line is in non-active state after spi_setup()) introduces an unconditional call of spi_set_cs() before ->setup(). The dw_spi_set_cs() relies on that fact that ->setup() is already called, but it doesn't now. This patch fixes the crash by adding an additional check to dw_spi_set_cs(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-17spi: dw-spi: Convert 16bit accesses to 32bit accessesThor Thayer
Altera's Arria10 SoC interconnect requires a 32-bit write for APB peripherals. The current spi-dw driver uses 16-bit accesses in some locations. This patch converts all the 16-bit reads and writes to 32-bit reads and writes. Additional Documentation to Support this Change: The DW_apb_ssi databook states: "All registers in the DW_apb_ssi are addressed at 32-bit boundaries to remain consistent with the AHB bus. Where the physical size of any register is less than 32-bits wide, the upper unused bits of the 32-bit boundary are reserved. Writing to these bits has no effect; reading from these bits returns 0." [1] [1] Section 6.1 of dw_apb_ssi.pdf (version 3.22a) Request for test with platforms using the DesignWare SPI IP. Tested On: Altera CycloneV development kit Altera Arria10 development kit Compile tested for build errors on x86_64 (allyesconfigs) Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Reviewed-and-tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 13:00:28 +0000