summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-atmel.c
AgeCommit message (Collapse)Author
2014-03-21spi: atmel: fix printk format warningsRandy Dunlap
Fix printk format warning by using %p extension 'ad' for dma_addr_t. drivers/spi/spi-atmel.c:1228:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat] drivers/spi/spi-atmel.c:1228:3: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05spi: atmel: add missing spi_master_{resume,suspend} calls to PM callbacksWenyou Yang
The PM callbacks implemented by the spi-atmel driver don't call spi_master_{resume,suspend}, fix that. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05spi: atmel: adopt pinctrl supportWenyou Yang
Amend the spi atmel pin controller to optionally take a pin control handle and set the state of the pins to: - "default" on boot, resume and before performing an spitransfer - "sleep" on suspend() This should make it possible to optimize energy usage for the pins both for the suspend/resume cycle Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03spi: atmel: Let spi core handle validating transfer lengthAxel Lin
spi core will handle validating transfer length since commit 4d94bd21b333 "spi: core: Validate length of the transfers in message". So remove the same checking in this driver. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03spi: atmel: Remove redundant list_empty checkingAxel Lin
This checking is already done in __spi_validate(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-12spi: Remove duplicate code to check chip_selectAxel Lin
In spi_add_device(), we have the code to validate spi->chip_select. So remove the duplicate code in various drivers. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03spi: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-09spi: atmel: Refactor spi-atmel to use SPI framework queueWenyou Yang
Replace the deprecated master->transfer with transfer_one_message() and allow the SPI subsystem handle all the queuing of messages. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08spi: atmel: add support for changing message transfer speedRichard Genoud
The only speed available was max_speed (the maximum speed declared for a device). This patch adds the support for spi_tranfer->speed_hz parameter. We can now set a different speed for each spi message. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-04spi: atmel: Use devm_*() functionsJingoo Han
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-23spi: atmel: fix return value check in atmel_spi_probe()Wei Yongjun
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-16spi/atmel: Convert to devm_ioremap_resource()Mark Brown
This simplifies error handling. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-16Merge remote-tracking branch 'spi/topic/trivial' into spi-atmelMark Brown
Conflicts (trivial overlapping cleanups): drivers/spi/spi-atmel.c
2013-10-16spi: Don't break user-visible strings to multiple source lines in driversJarkko Nikula
User-visible strings are more difficult to grep from sources if they are separated to multiple source lines. This is worse than over 80 columns long line code style violation. Fix this by making those to single-line strings or by breaking them between variables. While at there, convert if (printk_ratelimit()) dev_warn() to use dev_warn_ratelimited in spi-pxa2xx.c. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-14spi: atmel: Fix checkpatch issueJingoo Han
Fix the following checkpatch warning. WARNING: quoted string split across lines Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-07spi: atmel: Fix incorrect error pathSachin Kamat
'irq' was not released when clk_prepare_enable failed. Fix it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17spi: atmel: Silence checkpatch errorsSachin Kamat
Fixes the following types of checkpatch errors and warning: ERROR: space required after that ',' (ctx:VxV) WARNING: sizeof *as should be sizeof(*as) Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17spi: atmel: convert from legacy pm ops to dev_pm_opsJingoo Han
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Also, duplicated 'return' is removed from atmel_spi_resume(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-31spi/atmel: Fix format specifier warningsEmil Goode
This patch fixes the following sparse warnings. dma_addr_t can be either u32 or u64 so we should cast to the largest type and use the format specifier %llx. drivers/spi/spi-atmel.c: In function ‘atmel_spi_next_xfer_dma_submit’: drivers/spi/spi-atmel.c:631:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] drivers/spi/spi-atmel.c:631:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] drivers/spi/spi-atmel.c: In function ‘atmel_spi_pdc_next_xfer’: drivers/spi/spi-atmel.c:734:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] drivers/spi/spi-atmel.c:734:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] drivers/spi/spi-atmel.c:773:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] drivers/spi/spi-atmel.c:773:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] Signed-off-by: Emil Goode <emilgoode@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-28spi/atmel: Annotate lock/unlock functionsMark Brown
Let checkers like sparse know that the locking imbalances are intentional in these functions. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-17spi: atmel: prepare clk before calling enableBoris BREZILLON
Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to avoid common clk framework warnings. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-26Merge remote-tracking branch 'spi/topic/bpw' into spi-nextMark Brown
2013-06-03spi: atmel: convert to dma_request_slave_channel_compat()Richard Genoud
Use generic DMA DT helper. Platforms booting with or without DT populated are both supported. Based on Ludovic Desroches <ludovic.desroches@atmel.com> patchset "ARM: at91: move to generic DMA device tree binding" Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Ludovic Desroches <ludovic.desroches@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-05-29spi: convert drivers to use bits_per_word_maskStephen Warren
Fill in the recently added spi_master.bits_per_word_mask field in as many drivers as possible. Make related cleanups, such as removing any redundant error-checking, or empty setup callbacks. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-13Merge remote-tracking branch 'spi/fix/grant' into spi-linusMark Brown
2013-05-02spi/spi-atmel: BUG: fix doesn' support 16 bits transfers using PIORichard Genoud
Fix using PIO transfer mode only support 8 bits transfer, doesn't support 16 bits. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> [wenyou.yang@atmel.com: submit the patch] Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-24spi/spi-atmel: add dmaengine supportNicolas Ferre
Add dmaengine support. Using "has_dma_support" member of struct is used to select the transfer mode: dmaengine or pdc. For the dmaengine transfer mode, it supports both 8 bits and 16 bits transfer. For the dmaengine transfer mode, if it fails to config dmaengine, or if the message length is less than 16 bytes, it will use the PIO transfer mode. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> [wenyou.yang@atmel.com: using "has_dma_support" to select dmaengine as the spi xfer mode] [wenyou.yang@atmel.com: fix DMA: OOPS if buffer > 4096 bytes] [wenyou.yang@atmel.com: submit the patch] Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> [richard.genoud@gmail.com: update with dmaengine interface] [richard.genoud@gmail.com: fix __init/__devinit sections mismatch] [richard.genoud@gmail.com: adapt to slave_config changes] [richard.genoud@gmail.com: add support t0 16 bits transfer] Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-23spi/spi-atmel: add flag to controller data for lock operationsNicolas Ferre
Will allow to drop the lock during DMA operations. Replacing non-irqsave versions with irqsave versions of the lock to make it correct in both pdc and dmaengine transfer mode Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> [wenyou.yang@atmel.com: submit the patch] Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-23spi/spi-atmel: add physical base addressNicolas Ferre
Needed for future use with dmaengine enabled driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> [wenyou.yang@atmel.com: submit the patch] Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-07spi/atmel: fix speed_hz check in atmel_spi_transfer()Joachim Eastwood
atmel_spi_transfer() would check speed_hz and fail if the speed was changed in the transfer. After commit "spi: make sure all transfer has proper speed set" this would happen on all transfers. Change speed_hz check to only fail if a lower speed than max is requested. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-01spi/spi-atmel: status information passed through controller dataNicolas Ferre
The status of transfer is stored in controller data structure so that it can be used not only by atmel_spi_msg_done() function. This will be useful for upcoming dmaengine enabled driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01spi/spi-atmel: call unmapping on transfers buffersNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01spi/spi-atmel: add support transfer on CS1,2,3, not only on CS0Wenyou Yang
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01spi/spi-atmel: detect the capabilities of SPI core by reading the VERSION ↵Wenyou Yang
register. The "has_dma_support" needed for future use with dmaengine driver. [Fixed some unneded ternery operators -- broonie] Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-05spi: Remove erroneous __init, __exit and __exit_p() references in driversGrant Likely
Some of the spi driver module remove hooks were annotated with __exit and referenced with __exit_p(). Presumably these were supposed to be __devinit, __devexit and __devexit_p() since __init/__exit for a probe/remove hook has never been correct. They also got missed during the big __devinit/__devexit purge since they didn't match the pattern. Remove then now to be rid of it. v2: purge __init also Reported-by: Arnd Bergmann <arnd@arndb.de> [Arnd set a patch cleaning up one, and then I found more] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-17spi/atmel: add DT supportJean-Christophe PLAGNIOL-VILLARD
Use the newly introduce cs-gpios dt support on atmel. We do not use the hardware cs as it's wired and has bugs and limitations. As the controller believes that only active-low devices/systems exists. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-13Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull SPI updates from Grant Likely: "Primarily SPI device driver bug fixes, one removal of an old driver, and some new tegra support. There is some core code change too, but all in all pretty small stuff. The new features to note are: - Common code for describing GPIO CS lines in the device tree - Remove the SPI_BUFSIZ limitation on spi_write_the_read() - core spi ensures bits_per_word is set correctly - SPARC can now use SPI" * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6: (36 commits) spi/sparc: Allow of_register_spi_devices for sparc spi: Remove HOTPLUG section attributes spi: Add support for specifying 3-wire mode via device tree spi: Fix comparison of different integer types spi/orion: Add SPI_CHPA and SPI_CPOL support to kirkwood driver. spi/sh: Add SH Mobile series as dependency to MSIOF controller spi/sh-msiof: Remove unneeded clock name spi: Remove SPI_BUFSIZ restriction on spi_write_then_read() spi/stmp: remove obsolete driver spi/clps711x: New SPI master driver spi: omap2-mcspi: remove duplicate inclusion of linux/err.h spi: omap2-mcspi: Fix the redifine warning spi/sh-hspi: add CS manual control support of_spi: add generic binding support to specify cs gpio spi: omap2-mcspi: remove duplicated include from spi-omap2-mcspi.c spi/bitbang: (cosmetic) simplify list manipulation spi/bitbang: avoid needless loop flow manipulations spi/omap: fix D0/D1 direction confusion spi: tegra: add spi driver for sflash controller spi: Dont call master->setup if not populated ...
2012-12-07spi: Remove HOTPLUG section attributesGrant Likely
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Bill Pemberton has done most of the legwork on this series. I've used his script to purge the attributes from the drivers/gpio tree. Reported-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-06arm: at91: move platfarm_data to include/linux/platform_data/atmel.hJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-09atmel/spi: fix missing probeJean-Christophe PLAGNIOL-VILLARD
Commit 940ab889 "drivercore: Add helper macro for platform_driver boilerplate" converted this driver to use module_platform_driver, but due to the use of platform_driver_probe(), this resulted in the call to atmel_spi_probe being lost. Place the call to this function into the driver structure. fix section missmatch atmel_spi_probe is marked __init where it's supposed to be __devinit atmel_spi_remove is marked __exit where it's supposed to be __devexit Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-10-29Merge branch 'spi/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'spi/next' of git://git.secretlab.ca/git/linux-2.6: drivercore: Add helper macro for platform_driver boilerplate spi: irq: Remove IRQF_DISABLED OMAP: SPI: Fix the trying to free nonexistent resource error spi/spi-ep93xx: add module.h include spi/tegra: fix compilation error in spi-tegra.c spi: spi-dw: fix all sparse warnings spi/spi-pl022: Call pl022_dma_remove(pl022) only if enable_dma is true spi/spi-pl022: calculate_effective_freq() must set rate <= requested rate spi/spi-pl022: Don't allocate more sg than required. spi/spi-pl022: Use GFP_ATOMIC for allocation from tasklet spi/spi-pl022: Resolve formatting issues
2011-10-25drivercore: Add helper macro for platform_driver boilerplateGrant Likely
For simple modules that contain a single platform_driver without any additional setup code then ends up being a block of duplicated boilerplate. This patch adds a new macro, module_platform_driver(), which replaces the module_init()/module_exit() registrations with template functions. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Reviewed-by: Magnus Damm <magnus.damm@gmail.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2011-08-08ARM: gpio: at91: convert drivers to use asm/gpio.h rather than mach/gpio.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-06spi: reorganize driversGrant Likely
Sort the SPI makefile and enforce the naming convention spi_*.c for spi drivers. This change also rolls the contents of atmel_spi.h into the .c file since there is only one user of that particular include file. v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be be the predominant pattern for subsystem prefixes. - Clean up filenames in Kconfig and header comment blocks Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 20:46:40 +0000