summaryrefslogtreecommitdiff
path: root/drivers/soundwire
AgeCommit message (Collapse)Author
2020-04-20soundwire: intel: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI ↵Kuninori Morimoto
pointer Now ALSA SoC needs to use asoc_rtd_to_codec(), otherwise, it will be compile error. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-By: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/87y2qqvdxu.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-03Merge tag 'char-misc-5.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc/other driver patches for 5.7-rc1. Lots of things in here, and it's later than expected due to some reverts to resolve some reported issues. All is now clean with no reported problems in linux-next. Included in here is: - interconnect updates - mei driver updates - uio updates - nvmem driver updates - soundwire updates - binderfs updates - coresight updates - habanalabs updates - mhi new bus type and core - extcon driver updates - some Kconfig cleanups - other small misc driver cleanups and updates As mentioned, all have been in linux-next for a while, and with the last two reverts, all is calm and good" * tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits) Revert "driver core: platform: Initialize dma_parms for platform devices" Revert "amba: Initialize dma_parms for amba devices" amba: Initialize dma_parms for amba devices driver core: platform: Initialize dma_parms for platform devices bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device() bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture bus: mhi: core: Add support for reading MHI info from device misc: rtsx: set correct pcr_ops for rts522A speakup: misc: Use dynamic minor numbers for speakup devices mei: me: add cedar fork device ids coresight: do not use the BIT() macro in the UAPI header Documentation: provide IBM contacts for embargoed hardware nvmem: core: remove nvmem_sysfs_get_groups() nvmem: core: use is_bin_visible for permissions nvmem: core: use device_register and device_unregister nvmem: core: add root_only member to nvmem device struct extcon: axp288: Add wakeup support extcon: Mark extcon_get_edev_name() function as exported symbol extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format ...
2020-03-20Merge branch 'topic/ro_wordlength' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into asoc-5.7
2020-03-20soundwire: qcom: add support for get_sdw_stream()Srinivas Kandagatla
Adding support to new get_sdw_stream() that can help machine driver to deal with soundwire stream. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200317092645.5705-1-srinivas.kandagatla@linaro.org [fix checkpatch error for "void * qcom_swrm_get_sdw_stream"] Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-20Merge branch 'topic/ro_wordlength' into nextVinod Koul
2020-03-20soundwire: stream: Add read_only_wordlength flag to port propertiesSrinivas Kandagatla
According to SoundWire Specification Version 1.2. "A Data Port number X (in the range 0-14) which supports only one value of WordLength may implement the WordLength field in the DPX_BlockCtrl1 Register as Read-Only, returning the fixed value of WordLength in response to reads." As WSA881x interfaces in PDM mode making the only field "WordLength" in DPX_BlockCtrl1" fixed and read-only. Behaviour of writing to this register on WSA881x soundwire slave with Qualcomm Soundwire Controller is throwing up an error. Not sure how other controllers deal with writing to readonly registers, but this patch provides a way to avoid writes to DPN_BlockCtrl1 register by providing a read_only_wordlength flag in struct sdw_dpn_prop Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200311113545.23773-2-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: clear FIFO to avoid pop noise issue on playback startranderwang
Driver should clear FIFO in PDI, or the previously stored sample data in FIFO will generate pop noise when stream is started. The soft reset bit will clear all the FIFO to zero and is self-cleared after that. Signed-off-by: randerwang <rander.wang@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-18-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: multi-link supportPierre-Louis Bossart
Enable multi-link (aka multi-master configuration). In this configuration, updates and commands with the 'ssp_sync' tag will be deferred and controlled by the gsync hardware signal. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-17-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: commit changes in the exit_reset() sequencePierre-Louis Bossart
Follow recommended flows, the BUS_RESET must be programmed before the UPDATE_CONFIG. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-16-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: remove automatic command retriesPierre-Louis Bossart
This is a good idea on paper, but it's not recommended at all when operating in multi-master mode. It's also not recommended when doing bank switches, since the retransmission would happen at the next SSP, and the command protocol is stuck in the mean time. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-15-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: remove PREQ_DELAY assignmentPierre-Louis Bossart
The hardware default is 0x1F, and the existing code does an OR with 0xF. This is a no-op, remove. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-14-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: enable NORMAL operation in cdns_init()Pierre-Louis Bossart
Follow recommended programming sequences, this needs to be enabled before the reset sequence. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-13-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: reorder MCP_CONFIG settingsPierre-Louis Bossart
Follow hardware programming flows and add placeholder comment for multi-master mode. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-12-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: make SSP interval programmablePierre-Louis Bossart
In multi-master mode, the IP will only accept SSP intervals with integer relationships between the frame rate and the gsync frequency. E.g for a 48kHz frame rate and 4 kHz gsync signal, the SSP interval can only be 1, 2, 3, 4, 6, 12. To simplify we only allow one SSP per gsync interval. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-11-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: move clock/SSP related inits to dedicated functionPierre-Louis Bossart
This helps isolate code and align with recommended programming flows Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-10-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: merge routines to clear/set bitsPierre-Louis Bossart
Use a single loop to wait for hardware to set/clear fields. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-9-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: mask Slave interrupt before stopping clockPierre-Louis Bossart
Intel QA reported a very rare case, possibly hardware-dependent, where a Slave can become UNATTACHED during a clock stop sequence, which leads to timeouts and failed suspend sequences. This patch suppresses the handling of all Slave events while this transition happens. The two cases that matter are: a) alerts: if the Slave wants to signal an alert condition, it can do so using the in-band wake, so there's almost no impact with this patch. b) sync loss or imp-def reset: in those cases, bringing back the Slave to functional state requires a complete re-enumeration. It's better to just ignore this case and restart cleanly, rather than attempt a 'clean' suspend. Validation results show the timeouts no longer visible with this patch. GitHub issue: https://github.com/thesofproject/linux/issues/1678 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-8-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: fix a io timeout issue in S3 testRander Wang
After system resumes from S3, io timeout occurs when setting one unused master on Comet Lake platform. In this case, the master is reset to default state, and FIFOLEVEL is reset to default value, but msg_count used for tracing FIFOLEVEL is still with old value, so FIFOLEVEL will not be set if a new msg FIFO usage is equal to the old msg_count. This patch updates msg_count to default value of FIFOLEVEL when resetting master. Tested on Comet Lake platform. Signed-off-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: add clock_stop/restart routinesRander Wang
Add support for clock stop and restart, with two configuration parameters: 1) when entering the ClockStop mode, Slave-initiated wakes can be prevented. 2) When exiting the ClockStop mode, the caller can request a Bus Reset (either if all Slaves were configured in ClockStopMode1 or the Master IP lost context and enumeration is required) The code handles the case where no Slaves are present by configuring the IP to treat COMMAND_IGNORED as success. The exit_reset part can be dealt with in the caller, along with the required syncArm/syncGo sequence in multi-link mode. Signed-off-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: handle error cases with CONFIG_UPDATEPierre-Louis Bossart
config_update() may time out or cannot be use in ClockStopMode Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: add interface to check clock statusRander Wang
If master is in clock stop state, driver can't modify registers in master except the registers for clock stop setting. Signed-off-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: simplifiy cdns_init()Rander Wang
There is no need for the clock_stop_exit argument with the latest implementation Signed-off-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: s/update_config/config_updatePierre-Louis Bossart
Somehow we inverted the two, align with register definition to avoid further confusion. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-13soundwire: stream: use sdw_write instead of updateSrinivas Kandagatla
There is no point in using update for registers with write mask as 0xFF, this adds unnecessary traffic on the bus. Just use sdw_write directly. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200312100105.5293-1-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-10ASoC: qcom: use for_each_rtd_codecs/cpus_dai() macroKuninori Morimoto
This patch switch to use plural form macro. - for_each_rtd_codec_dai() + for_each_rtd_codec_dais() - for_each_rtd_codec_dai_rollback() + for_each_rtd_codec_dais_rollback() - for_each_rtd_cpu_dai() + for_each_rtd_cpu_dais() - for_each_rtd_cpu_dai_rollback() + for_each_rtd_cpu_dais_rollback() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87wo7ugogy.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-03soundwire: bus: provide correct return value on errorBard Liao
It seems to be a typo. It makes more sense to return the return value of sdw_update() instead of the value we want to update. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200227220949.4013-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-26Merge branch 'topic/asoc' into nextVinod Koul
2020-02-26soundwire: add helper macros for devID fieldsPierre-Louis Bossart
Move bit extractors to macros, so that the definitions can be used by other drivers parsing the MIPI definitions extracted from firmware tables (ACPI or DT). Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200225170041.23644-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-26soundwire: cadence: remove useless prototypesPierre-Louis Bossart
These prototypes are no longer used, remove. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200225170041.23644-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25soundwire: bus: don't treat CMD_IGNORED as error on ClockStopPierre-Louis Bossart
If a SoundWire link is enabled, but there are no Slave devices exposed in firmware tables for this link, or no Slaves in ATTACHED or ALERT mode, the CMD_IGNORED/-ENODATA error code on a broadcast write is perfectly legit. Filter this case to report errors and let the caller deal with the CMD_IGNORED case. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200115000844.14695-11-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25soundwire: bus: add clock stop helpersRander Wang
SoundWire supports two clock stop modes. Add support to handle the clock stop modes and add pm_runtime calls in the bus. Credits: this patch is based on an earlier internal contribution by Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200115000844.14695-10-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25soundwire: bus: fix io error when processing alert eventRander Wang
There are two types of io errors when processing alert event. a) the Master detects an ALERT status for e.g. a jack event and invokes the implementation-defined function in the Slave driver to check the jack status. At this time the codec is just suspended, so io registers can't be accessed. b) when waking up from clock stop mode1 state, where the bus needs a complete re-enumeration, Slave registers can't be accessed until the enumeration is complete. This patch resumes the Slave device and waits for initialization complete when processing slave alert event, so that registers on the Slave can be accessed without timeouts or io errors. Signed-off-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200115000844.14695-9-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25soundwire: bus: disable pm_runtime in sdw_slave_deletePierre-Louis Bossart
Before removing the slave device, disable pm_runtime to prevent any race condition with the resume being executed after the bus and slave devices are removed. Since this pm_runtime_disable() is handled in common routines, implementations of Slave drivers do not need to call it in their .remove() routine. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200115000844.14695-8-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25soundwire: bus: add helper to clear Slave status to UNATTACHEDPierre-Louis Bossart
When resuming with a bus reset, we need to re-enumerate and restart from UNATTACHED. The helper added in this patch helps implement a more robust state machine avoiding race conditions on resume. The unattach request is stored and will be used by Slave drivers, if needed: Intel validation exposed a corner case where the Slave device may transition to D3 when streaming stops, but streaming restarts before the Master transitions to D3. In that case, the Slave status was not cleared as UNATTACHED by the Master resuming, and the wait_for_completion will time out. When the slave resumes, it can check if a Master-initiated re-enumeration and initialization took place and skip the wait_for_completion() if there is no reason to wait. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200115000844.14695-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25soundwire: bus: write Slave Device Number without runtime_pmPierre-Louis Bossart
While handling the Device0, we can safely use sdw_write_no_pm. This move will also helps us track that all other usages of sdw_write() happen when the Slave is already enumerated. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200115000844.14695-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25soundwire: bus: add PM/no-PM versions of read/write functionsPierre-Louis Bossart
Add support for pm_runtime with the appropriate error checks for sdw_write/read functions, e.g. when pm_runtime is not supported. Also expose internal functions without pm_runtime support, which are required to perform any sort of suspend/resume operation, as well as any enumeration tasks. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200115000844.14695-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25soundwire: bus: fix race condition with initialization_complete signalingPierre-Louis Bossart
Waiting for the enumeration to be complete may not be enough for a Slave driver, there is a possible race condition between resume operations and initializations handled in an interrupt thread, which can results in settings not being fully restored after system or pm_runtime resume. This patch builds on the changes added for enumeration_complete, init_completion() is called when the Slave device becomes UNATTACHED, as done with enumeration_complete. The difference with the enumeration_complete case is that complete() is signaled after the Slave device is fully initialized after the .update_status() callback is called. A Slave device driver can decide to wait on either of the two complete() cases, depending on its initialization code and requirements. Signed-off-by: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200115000844.14695-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25soundwire: bus: fix race condition with enumeration_complete signalingPierre-Louis Bossart
This patch adds the signaling needed for Slave drivers to wait until the enumeration completes so that race conditions when issuing read/write commands are avoided. The calls for wait_for_completion() will be added in codec drivers in follow-up patches. The order between init_completion() and complete() is deterministic, the Slave is marked as UNATTACHED either during a Master-initiated HardReset, or when the hardware detects the Slave no longer reports as ATTACHED. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200115000844.14695-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25soundwire: bus: fix race condition with probe_complete signalingPierre-Louis Bossart
The driver probe takes care of basic initialization and is invoked when a Slave becomes attached, after a match between the Slave DevID registers and ACPI/DT entries. The update_status callback is invoked when a Slave state changes, e.g. when it is assigned a non-zero Device Number and it reports with an ATTACHED/ALERT state. The state change detection is usually hardware-based and based on the SoundWire frame rate (e.g. double-digit microseconds) while the probe is a pure software operation, which may involve a kernel module load. In corner cases, it's possible that the state changes before the probe completes. This patch suggests the use of wait_for_completion to avoid races on startup, so that the update_status callback does not rely on invalid pointers/data structures. Signed-off-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200115000844.14695-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-19ASoC: soundwaire: qcom: use for_each_rtd_codec_dai() macroKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87o8tvjcbc.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-18soundwire: intel: free all resources on hw_free()Pierre-Louis Bossart
Make sure all calls to the SoundWire stream API are done and involve callback. Also kfree the stream name. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Rander Wang <rander.wang@linux.intel.com> Acked-by: Sanyog Kale <sanyog.r.kale@intel.com> Link: https://lore.kernel.org/r/20200215014740.27580-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-18soundwire: intel: add sdw_stream_setup helper for .startup callbackRander Wang
The sdw stream is allocated and stored in dai to share the sdw runtime information. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Rander Wang <rander.wang@linux.intel.com> Acked-by: Sanyog Kale <sanyog.r.kale@intel.com> Link: https://lore.kernel.org/r/20200215014740.27580-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-18soundwire: intel: add trigger support in sdw dai driverRander Wang
The existing code does not expose a trigger callback, which is very much required for streaming. The SoundWire stream is enabled and disabled in trigger function. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Rander Wang <rander.wang@linux.intel.com> Acked-by: Sanyog Kale <sanyog.r.kale@intel.com> Link: https://lore.kernel.org/r/20200215014740.27580-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-18soundwire: intel: add prepare support in sdw dai driverRander Wang
The existing code does not expose a prepare operation, which is very much needed to deal with underflow and resume operations. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Rander Wang <rander.wang@linux.intel.com> Acked-by: Sanyog Kale <sanyog.r.kale@intel.com> Link: https://lore.kernel.org/r/20200215014740.27580-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-18soundwire: intel: rename res field as link_resPierre-Louis Bossart
There are too many fields called 'res' so add prefix to make it easier to track what the structures are. Pure rename, no functionality change Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Sanyog Kale <sanyog.r.kale@intel.com> Link: https://lore.kernel.org/r/20200215014740.27580-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-13soundwire: stream: don't program ports when a stream that has not been preparedRander Wang
In the Intel QA multi-pipelines test case, there are two pipelines for playback and capture on the same bus. The test fails with an error when setting port params: [ 599.224812] rt711 sdw:0:25d:711:0: invalid dpn_prop direction 1 port_num 0 [ 599.224815] sdw_program_slave_port_params failed -22 [ 599.224819] intel-sdw sdw-master-0: Program transport params failed: -22 [ 599.224822] intel-sdw sdw-master-0: Program params failed: -22 [ 599.224828] sdw_enable_stream: SDW0 Pin2-Playback: done This problem is root-caused to the programming of the capture stream ports while it is not yet prepared, the calling sequence is: (1) hw_params for playback. The playback stream provide the port information to Bus. (2) stream_prepare for playback, Transport and port parameters are computed for playback. (3) hw_params for capture. The capture stream provide the port information to Bus, but it has not been prepared so is not accounted for in the bandwidth allocation. (4) stream_enable for playback. Program transport and port parameters for all masters and slaves. Since the transport and port parameters are not computed for capture stream, sdw_program_slave_port_params will generate a error when setting port params for capture. in step (4), we should only program the ports for the stream that have been prepared. A stream that is only in CONFIGURED state should be ignored, its ports will be programmed when it becomes PREPARED. Tested on Comet Lake. GitHub issue: https://github.com/thesofproject/linux/issues/1637 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Rander Wang <rander.wang@intel.com> Link: https://lore.kernel.org/r/20200114235227.14502-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-13soundwire: stream: fix support for multiple Slaves on the same linkRander Wang
The existing code will unconditionally return after dealing with the first Slave on a link. This return should only happen when there is an error case. Tested on Comet Lake platform. Signed-off-by: Rander Wang <rander.wang@intel.com> Link: https://lore.kernel.org/r/20200114235227.14502-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-13soundwire: stream: do not update parameters during DISABLED-PREPARED transitionPierre-Louis Bossart
After a system suspend, the ALSA/ASoC core will invoke the .prepare() callback and a TRIGGER_START when INFO_RESUME is not supported. Likewise, when an underflow occurs, the .prepare callback will be invoked. In both cases, the stream can be in DISABLED mode, and will transition into the PREPARED mode. We however don't want the bus bandwidth to be recomputed. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200114235227.14502-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-13soundwire: stream: only prepare stream when it is configured.Bard Liao
We don't need to prepare the stream again if the stream is already prepared. sdw_prepare_stream() could be called multiple times without calling sdw_deprepare_stream(). We call sdw_prepare_stream() in the prepare dai ops and sdw_deprepare_stream() in the hw_free dai ops. If an xrun happens, sdw_prepare_stream() will be called but sdw_deprepare_stream() will not, which results in an imbalance and an invalid total bandwidth. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200114235227.14502-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-13soundwire: stream: update state machine and add state checksPierre-Louis Bossart
The state machine and notes don't accurately explain or allow transitions from STREAM_DEPREPARED and STREAM_DISABLED. Add more explanations and allow for more transitions as a result of a trigger_stop(), trigger_suspend() and prepare(), depending on the ALSA/ASoC layer behavior defined by the INFO_RESUME and INFO_PAUSE flags. Also add basic checks to help debug inconsistent states and illegal state machine transitions. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200114235227.14502-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-21 13:42:07 +0000