summaryrefslogtreecommitdiff
path: root/drivers/soc
AgeCommit message (Collapse)Author
2018-02-28Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "This is the first set of bugfixes for ARM SoCs, fixing a couple of stability problems, mostly on TI OMAP and Rockchips platforms: - OMAP2 hwmod clocks must be enabled in the correct order - OMAP3 Wakeup from resume through PRM IRQ was unreliable - one regression on OMAP5 caused by a kexec fix - Rockchip ethernet needs some settings for stable operation on Rock64 - Rockchip based Chrombook Plus needs another clock setting for stable display suspend/resume - Rockchip based phyCORE-RK3288 was able to run at an invalid CPU clock frequency - Rockchip MMC link was sometimes unreliable - multiple fixes to avoid crashes in the Broadcom STB DPFE driver Other minor changes include: - Devicetree fixes for incorrect hardware description (rockchip, omap, Gemini, amlogic) - some MAINTAINER file updates to correct email and git addresses - some fixes addressing 'make W=1' dtc warnings (broadcom, amlogic, cavium, qualcomm, hisilicon, zx) - fixes for LTO-compilation (orion, davinci, clps711x) - one fix for an incorrect Kconfig errata selection - a memory leak in the OMAP timer driver - a kernel data leak in OMAP1 debugfs files" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) MAINTAINERS: update entries for ARM/STM32 ARM: dts: bcm283x: Move arm-pmu out of soc node ARM: dts: bcm283x: Fix unit address of local_intc ARM: dts: NSP: Fix amount of RAM on BCM958625HR ARM: dts: Set D-Link DNS-313 SATA to muxmode 0 ARM: omap2: set CONFIG_LIRC=y in defconfig ARM: dts: imx6dl: Include correct dtsi file for Engicam i.CoreM6 DualLite/Solo RQS memory: brcmstb: dpfe: support new way of passing data from the DCPU memory: brcmstb: dpfe: fix type declaration of variable "ret" memory: brcmstb: dpfe: properly mask vendor error bits ARM: BCM: dts: Remove leading 0x and 0s from bindings notation ARM: orion: fix orion_ge00_switch_board_info initialization ARM: davinci: mark spi_board_info arrays as const ARM: clps711x: mark clps711x_compat as const arm: zx: dts: Remove leading 0x and 0s from bindings notation arm64: dts: Remove leading 0x and 0s from bindings notation arm64: dts: cavium: fix PCI bus dtc warnings MAINTAINERS: ARM: at91: update my email address soc: imx: gpc: de-register power domains only if initialized ARM: dts: rockchip: Fix DWMMC clocks ...
2018-02-22treewide/trivial: Remove ';;$' typo noiseIngo Molnar
On lkml suggestions were made to split up such trivial typo fixes into per subsystem patches: --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -439,7 +439,7 @@ setup_uga32(void **uga_handle, unsigned long size, u32 *width, u32 *height) struct efi_uga_draw_protocol *uga = NULL, *first_uga; efi_guid_t uga_proto = EFI_UGA_PROTOCOL_GUID; unsigned long nr_ugas; - u32 *handles = (u32 *)uga_handle;; + u32 *handles = (u32 *)uga_handle; efi_status_t status = EFI_INVALID_PARAMETER; int i; This patch is the result of the following script: $ sed -i 's/;;$/;/g' $(git grep -E ';;$' | grep "\.[ch]:" | grep -vwE 'for|ia64' | cut -d: -f1 | sort | uniq) ... followed by manual review to make sure it's all good. Splitting this up is just crazy talk, let's get over with this and just do it. Reported-by: Pavel Machek <pavel@ucw.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-22soc: imx: gpc: de-register power domains only if initializedStefan Agner
If power domain information are missing in the device tree, no power domains get initialized. However, imx_gpc_remove tries to remove power domains always in the old DT binding case. Only remove power domains when imx_gpc_probe initialized them in first place. Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver") Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-01Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "A number of new drivers get added this time, along with many low-priority bugfixes. The most interesting changes by subsystem are: bus drivers: - Updates to the Broadcom bus interface driver to support newer SoC types - The TI OMAP sysc driver now supports updated DT bindings memory controllers: - A new driver for Tegra186 gets added - A new driver for the ti-emif sram, to allow relocating suspend/resume handlers there SoC specific: - A new driver for Qualcomm QMI, the interface to the modem on MSM SoCs - A new driver for power domains on the actions S700 SoC - A driver for the Xilinx Zynq VCU logicoreIP reset controllers: - A new driver for Amlogic Meson-AGX - various bug fixes tee subsystem: - A new user interface got added to enable asynchronous communication with the TEE supplicant. - A new method of using user space memory for communication with the TEE is added" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (84 commits) of: platform: fix OF node refcount leak soc: fsl: guts: Add a NULL check for devm_kasprintf() bus: ti-sysc: Fix smartreflex sysc mask psci: add CPU_IDLE dependency soc: xilinx: Fix Kconfig alignment soc: xilinx: xlnx_vcu: Use bitwise & rather than logical && on clkoutdiv soc: xilinx: xlnx_vcu: Depends on HAS_IOMEM for xlnx_vcu soc: bcm: brcmstb: Be multi-platform compatible soc: brcmstb: biuctrl: exit without warning on non brcmstb platforms Revert "soc: brcmstb: Only register SoC device on STB platforms" bus: omap: add MODULE_LICENSE tags soc: brcmstb: Only register SoC device on STB platforms tee: shm: Potential NULL dereference calling tee_shm_register() soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver dt-bindings: soc: xilinx: Add DT bindings to xlnx_vcu driver soc: xilinx: Create folder structure for soc specific drivers of: platform: populate /firmware/ node from of_platform_default_populate_init() soc: samsung: Add SPDX license identifiers soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe() tee: shm: don't put_page on null shm->pages ...
2018-01-26Merge tag 'zynqmp-soc-fixes-for-4.16' of ↵Arnd Bergmann
https://github.com/Xilinx/linux-xlnx into next/drivers Pull "arm: Xilinx ZynqMP SoC fixes for v4.16" from Michal Simek: - Fix Kconfig dependency - Fix vcu clkoutdiv calculation * tag 'zynqmp-soc-fixes-for-4.16' of https://github.com/Xilinx/linux-xlnx: soc: xilinx: Fix Kconfig alignment soc: xilinx: xlnx_vcu: Use bitwise & rather than logical && on clkoutdiv soc: xilinx: xlnx_vcu: Depends on HAS_IOMEM for xlnx_vcu
2018-01-23Merge tag 'soc-fsl-for-4.16' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/leo/linux into next/drivers Pull "FSL/NXP SoC drivers updates for 4.16" from Li Yang: This adds new SoC support and more error path handling to the guts driver. * tag 'soc-fsl-for-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: guts: Add a NULL check for devm_kasprintf() soc: fsl: support GUTS driver for ls1012a/ls1046a
2018-01-22soc: fsl: guts: Add a NULL check for devm_kasprintf()Fabio Estevam
devm_kasprintf() may fail, so we should better add a NULL check and propagate an error on failure. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2018-01-16soc: xilinx: Fix Kconfig alignmentMichal Simek
Tabs should be used for alignment instead of spaces. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-16soc: xilinx: xlnx_vcu: Use bitwise & rather than logical && on clkoutdivGustavo A. R. Silva
Currently clkoutdiv is being operated on by a logical && operator rather than a bitwise & operator. This looks incorrect as these should be bit flag operations. Addresses-Coverity-ID: 1463959 ("Logical vs. bitwise operator") Fixes: cee8113a295a ("soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Dhaval Shah <dshah@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-16soc: xilinx: xlnx_vcu: Depends on HAS_IOMEM for xlnx_vcuDhaval Shah
xlnx_vcu driver uses devm_ioremap_nocache, which is included only when HAS_IOMEM is enabled. drivers/soc/xilinx/xlnx_vcu.o: In function `xvcu_probe': xlnx_vcu.c:(.text+0x116): undefined reference to `devm_ioremap_nocache' xlnx_vcu.c:(.text+0x1ae): undefined reference to `devm_ioremap_nocache' Signed-off-by: Dhaval Shah <dshah@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-15soc: bcm: brcmstb: Be multi-platform compatibleThierry Reding
We were making a bunch of wrong assumptions that turned out to blow out on non-Broadcom STB platforms: - we would return -ENODEV from brcmstb_soc_device_early_init() if we could not find the sun_top_ctrl device node, this is not an error in the context of a multi-platform kernel - we would still try to register the Broadcom STB SoC device, even if we are not running on such a platform While at it, also fix the sun_top_ctrl device_node leaks while we change the flow of brcmstb_soc_device_init() and brcmstb_soc_device_early_init(). Fixes: f780429adfbc ("soc: brcmstb: biuctrl: Move to early_initcall") Signed-off-by: Thierry Reding <treding@nvidia.com> [florian: Combine all of Thierry's patch in one go for easier review] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-01-15soc: brcmstb: biuctrl: exit without warning on non brcmstb platformsSudeep Holla
Currently if this driver is included, we get the following warning on any platforms irrespective of whether it's brcmstb platform or not. " brcmstb: biuctrl: missing BIU control node brcmstb: biuctrl: MCP: Unable to disable write pairing! " This patch allows to exit early without any warning messages on non brcmstb platforms as it's meaningless for them. Cc: Brian Norris <computersforpeace@gmail.com> Cc: Gregory Fong <gregory.0xf0@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Fixes: f780429adfbc ("soc: brcmstb: biuctrl: Move to early_initcall") Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> [florian: Add fixes tag, make initcall non fatal] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-01-12Revert "soc: brcmstb: Only register SoC device on STB platforms"Olof Johansson
This reverts commit 23a0d847992997000ca2223a19111ee778fbea63. Patch has issues that's being addressed by the Florian and he will follow up with a new patch to address the original issue. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-01-12Merge tag 'zynqmp-soc-for-4.16' of https://github.com/Xilinx/linux-xlnx into ↵Olof Johansson
next/drivers arm: Xilinx ZynqMP SoC patches for v4.16 - Create drivers/soc/xilinx folder structure - Add ZynqMP vcu init driver * tag 'zynqmp-soc-for-4.16' of https://github.com/Xilinx/linux-xlnx: soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver dt-bindings: soc: xilinx: Add DT bindings to xlnx_vcu driver soc: xilinx: Create folder structure for soc specific drivers Signed-off-by: Olof Johansson <olof@lixom.net>
2018-01-11Merge tag 'samsung-drivers-4.16-2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers Samsung soc drivers changes for v4.16 Add SPDX license identifiers. * tag 'samsung-drivers-4.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: Add SPDX license identifiers Signed-off-by: Olof Johansson <olof@lixom.net>
2018-01-11soc: brcmstb: Only register SoC device on STB platformsThierry Reding
After moving the SoC device initialization to an early initcall in commit f780429adfbc ("soc: brcmstb: biuctrl: Move to early_initcall"), the Broadcom STB SoC device is registered on all platforms if support for the device is enabled in the kernel configuration. This causes an additional SoC device to appear on platforms that already register a native one. In case of Tegra the STB SoC device is registered as soc0 (with totally meaningless content in the sysfs attributes) and causes various scripts and programs to fail because they don't know how to parse that data. To fix this, duplicate the check from brcmstb_soc_device_early_init() that already prevents the code from doing anything nonsensical on non- STB platforms. Fixes: f780429adfbc ("soc: brcmstb: biuctrl: Move to early_initcall") Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-01-08soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driverDhaval Shah
Xilinx ZYNQMP logicoreIP Init driver is based on the new LogiCoreIP design created. This driver provides the processing system and programmable logic isolation. Set the frequency based on the clock information get from the logicoreIP register set. Signed-off-by: Dhaval Shah <dshah@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-08soc: xilinx: Create folder structure for soc specific driversMichal Simek
Create directory structure with Makefile/Kconfig for adding xilinx soc specific drivers. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-05Merge tag 'imx-drivers-4.16' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers Pull "i.MX drivers update for 4.16" from Shawn Guo: - Update i.MX GPC driver to support PCI power domain of i.MX6SX SoC. * tag 'imx-drivers-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: gpc: Add i.MX6SX PCI power domain
2018-01-05Merge tag 'qcom-drivers-for-4.16' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers Pull "Qualcomm ARM Based Driver Updates for v4.16 - Redo" from Andy Gross: * Fix error handling code in SMP2P probe * Update SMP2P to use ACPS as mailbox client * Add QMI support * Fixups for Qualcomm SCM * Fix licensing on rmtfs_mem * Correct SMSM child node lookup * Populate firmware nodes during platform init * tag 'qcom-drivers-for-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux: of: platform: populate /firmware/ node from of_platform_default_populate_init() soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe() soc: qcom: Introduce QMI helpers soc: qcom: Introduce QMI encoder/decoder firmware: qcom_scm: Add dependent headers to qcom_scm.h soc: qcom: smp2p: Access APCS as mailbox client soc: qcom: rmtfs_mem: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE soc: qcom: smsm: fix child-node lookup firmware: qcom_scm: drop redandant of_platform_populate
2018-01-04Merge tag 'keystone_driver_soc_for_4.16' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/drivers SOC: Keystone Soc driver updates for 4.16 - TI EMIF-SRAM driver - TI SCI print format fix - Navigator strndup lenth fix * tag 'keystone_driver_soc_for_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: soc: ti: fix max dup length for kstrndup firmware: ti_sci: Use %zu for size_t print format memory: ti-emif-sram: remove unused variable memory: ti-emif-sram: introduce relocatable suspend/resume handlers Documentation: dt: Update ti,emif bindings Signed-off-by: Olof Johansson <olof@lixom.net>
2018-01-04Merge tag 'renesas-soc2-for-v4.16' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc Second Round of Renesas ARM Based SoC Updates for v4.16 * rcar-sysc: Keep wakeup sources active during system suspend Geert Uytterhoeven says "If an R-Car SYSC slave device is part of the CPG/MSTP or CPG/MSSR Clock Domain and to be used as a wakeup source, it must be kept active during system suspend. Currently this is handled in device-specific drivers by explicitly increasing the use count of the module clock when the device is configured as a wakeup source. However, the proper way to prevent the device from being stopped is to inform this requirement to the genpd core, by setting the GENPD_FLAG_ACTIVE_WAKEUP flag. Note that this will only affect devices configured as wakeup sources." * tag 'renesas-soc2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: soc: renesas: rcar-sysc: Keep wakeup sources active during system suspend Signed-off-by: Olof Johansson <olof@lixom.net>
2018-01-04Merge tag 'actions-drivers-for-4.16' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/drivers Actions Semi SoC drivers for v4.16 The SPS power domain driver is extended for S700 SoC. * tag 'actions-drivers-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions: soc: actions: sps: Add S700 Signed-off-by: Olof Johansson <olof@lixom.net>
2018-01-04Merge tag 'arm-soc/for-4.16/drivers' of http://github.com/Broadcom/stblinux ↵Olof Johansson
into next/drivers This pull request contains Broadcom ARM/ARM64 based SoCs drivers changes for 4.16, please pull the following: - Arnd provides an update to the Raspberry Pi firmware interface and uses time64_t to print the time to make it more future proof - Florian provides a set of updates to make the Broadcom STB Bus Interface Unit code work on newer ARM64-based chips, as well as perform the correct interface tuning for these chips to reach the expected performance * tag 'arm-soc/for-4.16/drivers' of http://github.com/Broadcom/stblinux: soc: brcmstb: biuctrl: Move to early_initcall soc: brcmstb: Split initialization soc: brcmstb: biuctrl: Fine tune B53 MCP interface settings soc: brcmstb: biuctrl: Wire-up new registers soc: brcmstb: biuctrl: Prepare for saving/restoring other registers soc: brcmstb: Correct CPU_CREDIT_REG offset for Brahma-B53 CPUs soc: brcmstb: Make CPU credit offset more parameterized dt-bindings: arm: brcmstb: Correct BIUCTRL node documentation dt-bindings: arm: Add entry for Broadcom Brahma-B53 firmware: raspberrypi: print time using time64_t Signed-off-by: Olof Johansson <olof@lixom.net>
2018-01-04soc: Add SoC driver for GeminiLinus Walleij
This adds an SoC driver for the Gemini. Currently there is only one thing not fitting into any other framework, and that is the bus arbitration setting. All Gemini vendor trees seem to be setting this register to exactly the same arbitration so we just add a small code snippet to do this at subsys_init() time before any other drivers kick in. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-01-03soc: samsung: Add SPDX license identifiersKrzysztof Kozlowski
Replace GPL license statements with SPDX GPL-2.0 license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-01-01soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe()Markus Elfring
* Add a jump target so that a specific error message is stored only once at the end of this function implementation. * Replace two calls of the function "dev_err" by goto statements. * Adjust two condition checks. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-12-26soc: imx: gpc: Add i.MX6SX PCI power domainFabio Estevam
i.MX6SX has a PCI power domain in PGC. Add support for it. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-21Merge tag 'v4.15-next-soc' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/soc Pull "arm: Updates for soc driver for v4.15-next" from Matthias Brugger: - change kconfig entry for armv7 SoCs to be more generic - add support for mt2701 scpsys driver binding documentation extend driver to allow the bus protection to overwrite the register * tag 'v4.15-next-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: soc: mediatek: add MT2712 scpsys support soc: mediatek: add dependent clock jpgdec/audio for scpsys soc: mediatek: extend bus protection API dt-bindings: soc: add MT2712 power dt-bindings ARM: mediatek: use more generic prompts for SoCs with ARMv7
2017-12-21Merge tag 'tegra-for-4.16-soc-2' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc Pull "soc/tegra: Changes for v4.16-rc1" from Thierry Reding: Fuse and chip ID support for Tegra186 is added in this set of changes, followed by some unification work for the PMC driver in order to avoid code duplication between Tegra186 and prior chips. This also contains a couple of fixes for reading fuses on Tegra20. * tag 'tegra-for-4.16-soc-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: fuse: Explicitly request DMA channel from APB DMA driver soc/tegra: fuse: Fix reading registers using DMA on Tegra20 soc/tegra: pmc: Consolidate Tegra186 support soc/tegra: pmc: Parameterize driver soc/tegra: fuse: Add Tegra186 chip ID support soc/tegra: fuse: Warn if accessing unmapped registers soc/tegra: fuse: Move register mapping check soc/tegra: fuse: Add Tegra186 support dt-bindings: misc: Add Tegra186 MISC registers bindings
2017-12-21soc/tegra: fuse: Explicitly request DMA channel from APB DMA driverDmitry Osipenko
Currently fuse driver requests DMA channel from an arbitrary DMA device, it is not a problem since there is only one DMA provider for Tegra20 yet, but it may become troublesome if another provider will appear. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-21soc/tegra: fuse: Fix reading registers using DMA on Tegra20Dmitry Osipenko
FUSE driver doesn't configure DMA channel properly, because of it DMA transfer is never issued and tegra20_fuse_read() always return 0x0. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-21Merge tag 'renesas-soc-for-v4.16' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc Pull "Renesas ARM Based SoC Updates for v4.16" from Simon Horman: * Identify R-Car M3-W ES1.1 Geert Uytterhoeven says "The Product Register of R-Car M3-W ES1.1 incorrectly identifies the SoC revision as ES2.0. Add a workaround to fix this." It is my understanding that this is likely to be forwards-compatibile. * tag 'renesas-soc-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas: soc: renesas: Identify R-Car M3-W ES1.1
2017-12-21soc: mediatek: add MT2712 scpsys supportweiyi.lu@mediatek.com
add scpsys driver for MT2712 Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-12-21soc: mediatek: add dependent clock jpgdec/audio for scpsysweiyi.lu@mediatek.com
There are dependent clock jpgdec/audio in scpsys on MT2712, and will exist three dependent clocks on MT2712 VDEC. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-12-21soc: mediatek: extend bus protection APIweiyi.lu@mediatek.com
MT2712 add "set/clear" bus control register to each control register set instead of providing only one "enable" control register, we could avoid the read-modify-write racing by declaring "bus_prot_reg_update" as "false" in scp_soc_data or declaring as "true" to use the legacy update method. By improving the mtk-infracfg bus protection implementation to support set/clear bus protection control method by IC configuration. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-12-20soc: brcmstb: biuctrl: Move to early_initcallFlorian Fainelli
Being called during early_initcall() is early enough that it occurs before SMP initialization, which is all we care about for the Bus Interface Unit configuration. This solves lack of BIU initialization on ARM64 platforms where we do not have an anchor where to put the BIU initialization (since there are no machine descriptors). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-12-20soc: brcmstb: Split initializationFlorian Fainelli
We may need access to family_id and product_id fairly early on boot for other parts of the code (e.g: biuctrl.c), so split the initialization between an early_init() and an arch_initcall() which allows us to do that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-12-20soc: brcmstb: biuctrl: Fine tune B53 MCP interface settingsFlorian Fainelli
In order to achieve expected MCP bus throughput on 3 particular chips: 7268, 7271 and 7278, do the appropriate programming of the MCP interface: increase number of MCP write credits, turn on write-back throttling when present. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-12-20soc: brcmstb: biuctrl: Wire-up new registersFlorian Fainelli
Add definitions for B53 systems register: CPU_MCP_FLOW_REG and CPU_WRITEBACK_CTRL_REG. These register will be saved and restored accordingly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-12-20soc: brcmstb: biuctrl: Prepare for saving/restoring other registersFlorian Fainelli
In preparation for saving/restoring additional registers required on some newer platforms (7268, 7271, 7278), migrate the code to use enums and helper functions to access registers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-12-20soc: brcmstb: Correct CPU_CREDIT_REG offset for Brahma-B53 CPUsFlorian Fainelli
On Broadcom Brahma-B53 CPUs, the CPU_CREDIT_REG offset got moved to 0x0b0 instead of 0x184, correct this such that we correcty enable/disable write-pairing for these chips. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-12-20soc: brcmstb: Make CPU credit offset more parameterizedFlorian Fainelli
In preparation for fixing and changing values in the CPU_CREDIT_REG register for B53-based systems, make the offset parameterized. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-12-20soc: qcom: Introduce QMI helpersBjorn Andersson
Drivers that needs to communicate with a remote QMI service all has to perform the operations of discovering the service, encoding and decoding the messages and operate the socket. This introduces an abstraction for these common operations, reducing most of the duplication in such cases. Acked-by: Chris Lew <clew@codeaurora.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-12-20soc: qcom: Introduce QMI encoder/decoderBjorn Andersson
Add the helper library for encoding and decoding QMI encoded messages. The implementation is taken from lib/qmi_encdec.c of the Qualcomm kernel (msm-3.18). Modifications has been made to the public API, source buffers has been made const and the debug-logging part was omitted, for now. Acked-by: Chris Lew <clew@codeaurora.org> Tested-by: Chris Lew <clew@codeaurora.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-12-20soc: qcom: smp2p: Access APCS as mailbox clientBjorn Andersson
Attempt to acquire the APCS IPC through the mailbox framework and fall back to the old syscon based approach, to allow us to move away from using the syscon. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-12-20soc: qcom: rmtfs_mem: add missing MODULE_DESCRIPTION/AUTHOR/LICENSEJesse Chan
This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/soc/qcom/rmtfs_mem.o see include/linux/module.h for more information This adds the license as "GPL v2", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by: Jesse Chan <jc@linux.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-12-20soc: qcom: smsm: fix child-node lookupJohan Hovold
Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. Note that the original premature free of the parent node has already been fixed separately. Also note that this pattern of looking up the first child node with a given property is rare enough that a generic helper is probably not warranted. Fixes: c97c4090ff72 ("soc: qcom: smsm: Add driver for Qualcomm SMSM") Fixes: 3e8b55411468 ("soc: qcom: smsm: fix of_node refcnting problem") Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-12-20soc: renesas: rcar-sysc: Keep wakeup sources active during system suspendGeert Uytterhoeven
If an R-Car SYSC slave device is part of the CPG/MSTP or CPG/MSSR Clock Domain and to be used as a wakeup source, it must be kept active during system suspend. Currently this is handled in device-specific drivers by explicitly increasing the use count of the module clock when the device is configured as a wakeup source. However, the proper way to prevent the device from being stopped is to inform this requirement to the genpd core, by setting the GENPD_FLAG_ACTIVE_WAKEUP flag. Note that this will only affect devices configured as wakeup sources. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-16soc: ti: fix max dup length for kstrndupMa Shimiao
If source string longer than max, kstrndup will alloc max+1 space. So, we should make sure the result will not over limit. Signed-off-by: Ma Shimiao <mashimiao.fnst@cn.fujitsu.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 03:02:57 +0000