| Age | Commit message (Collapse) | Author |
|---|
|
of_mm_gpiochip_add_data() calls mm_gc->save_regs() before
setting the data. Therefore ->save_regs() cannot use
gpiochip_get_data()
An Oops is encountered without this fix.
fixes: 1e714e54b5ca5 ("powerpc: qe_lib-gpio: use gpiochip data pointer")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: <stable@vger.kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Scott Wood <oss@buserror.net>
|
|
Commit 0e6e01ff694ee ("CPM/QE: use genalloc to manage CPM/QE muram")
has changed the way muram is managed.
genalloc uses kmalloc(), hence requires the SLAB to be up and running.
On powerpc 8xx, cpm_reset() is called early during startup.
cpm_reset() then calls cpm_muram_init() before SLAB is available,
hence the following Oops.
cpm_reset() cannot be called during initcalls because the CPM is
needed for console.
This patch removes the call to cpm_muram_init() from cpm_reset().
cpm_muram_init() will be called from a new function called cpm_init()
which is declared as subsys_initcall, unless cpm_muram_alloc() is
called earlier for the serial console in which case cpm_muram_init()
will be called from there.
The reason for calling it from two places is that some drivers
(e.g. i2c-cpm) need some of the initialisations done by
cpm_muram_init() but don't call cpm_muram_alloc(). The console
driver calls cpm_muram_alloc() but some platforms might not use
the CPM serial ports for console.
[ 0.000000] Unable to handle kernel paging request for data at address 0x00000008
[ 0.000000] Faulting instruction address: 0xc01acce0
[ 0.000000] Oops: Kernel access of bad area, sig: 11 [#1]
[ 0.000000] PREEMPT CMPC885
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.14-g0886ed8 #5
[ 0.000000] task: c05183e0 ti: c0536000 task.ti: c0536000
[ 0.000000] NIP: c01acce0 LR: c0011068 CTR: 00000000
[ 0.000000] REGS: c0537e50 TRAP: 0300 Not tainted (4.4.14-s3k-dev-g0886ed8-svn)
[ 0.000000] MSR: 00001032 <ME,IR,DR,RI> CR: 28044428 XER: 00000000
[ 0.000000] DAR: 00000008 DSISR: c0000000
GPR00: c0011068 c0537f00 c05183e0 00000000 00009000 ffffffff 00000bc0 ffffffff
GPR08: ff003000 ff00b000 ff003bbf 00000000 22044422 100d43a8 00000000 07ff94e8
GPR16: 00000000 07bb5d70 00000000 07ff81f4 07ff81f4 07ff81f4 00000000 00000000
GPR24: 07ffb3a0 07fe7628 c0550000 c7ffa190 c0540000 ff003bbf 00000000 00000001
[ 0.000000] NIP [c01acce0] gen_pool_add_virt+0x14/0xdc
[ 0.000000] LR [c0011068] cpm_muram_init+0xd4/0x18c
[ 0.000000] Call Trace:
[ 0.000000] [c0537f00] [00000200] 0x200 (unreliable)
[ 0.000000] [c0537f20] [c0011068] cpm_muram_init+0xd4/0x18c
[ 0.000000] [c0537f70] [c0494684] cpm_reset+0xb4/0xc8
[ 0.000000] [c0537f90] [c0494c64] cmpc885_setup_arch+0x10/0x30
[ 0.000000] [c0537fa0] [c0493cd4] setup_arch+0x130/0x168
[ 0.000000] [c0537fb0] [c04906bc] start_kernel+0x88/0x380
[ 0.000000] [c0537ff0] [c0002224] start_here+0x38/0x98
[ 0.000000] Instruction dump:
[ 0.000000] 91430010 91430014 80010014 83e1000c 7c0803a6 38210010 4e800020 7c0802a6
[ 0.000000] 9421ffe0 bf61000c 90010024 7c7e1b78 <80630008> 7c9c2378 7cc31c30 3863001f
[ 0.000000] ---[ end trace dc8fa200cb88537f ]---
fixes: 0e6e01ff694ee ("CPM/QE: use genalloc to manage CPM/QE muram")
Cc: stable@vger.linux.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[scottwood: Removed some string changes unrelated to bugfix]
Signed-off-by: Scott Wood <oss@buserror.net>
|
|
Use of_property_read_bool to check for the existence of a property.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression e1,e2;
statement S2,S1;
@@
- if (of_get_property(e1,e2,NULL))
+ if (of_property_read_bool(e1,e2))
S1 else S2
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
|
|
modify get_qe_base function with of_address_to_resource
instead of of_get_property and of_translate_address.
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
|
|
Use the function resource_size instead of explicit computation.
Problem found using Coccinelle.
Signed-off-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Signed-off-by: Scott Wood <oss@buserror.net>
|
|
next/drivers
Pull "ARM: mediatek: soc updates for v4.9" from Matthias Brugger:
extent the waiting time of the pmic wrapper to 10 ms which
reduces the failure rate on the data transfer between pmic and
pmic wrapper.
* tag 'v4.8-next-soc' of https://github.com/mbgg/linux-mediatek:
soc: mediatek: PMIC wrap: Extend the waiting time to 10ms.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
Pull "soc/tegra: Changes for v4.9-rc1" from Thierry Reding:
This contains a single patch to fix an issue with setting the deep power
down mode of I/O rails.
* tag 'tegra-for-4.9-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Fix incorrect DPD request
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers
Pull "Qualcomm ARM Based Driver Updates for v4.9" from Andy Gross:
* Silence smem probe defer messages
* Make scm explicitly non-modular
* Assorted SMD bug fixes and minor changes
* Add PM8018 RTC support
* tag 'qcom-drivers-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
rtc: rtc-pm8xxx: Add support for pm8018 rtc
soc: qcom: smd: Reset rx tail rather than tx
soc: qcom: smd: Represent smd edges as devices
soc: qcom: smd: Request irqs after parsing properties
soc: qcom: smd: Simplify multi channel handling
soc: qcom: smd: Correct compile stub prototypes
firmware: qcom_scm: make it explicitly non-modular
soc: qcom: smem: Silence probe defer error
|
|
Update the EXYNOS PM domain code to use the of_genpd_add_subdomain()
and remove any calls to of_genpd_get_from_provider().
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The local end of each SMD channel is responsible for updating the tx
head and the rx tail, as such we should not touch the tx tail during a
reset.
Reported-by: Jeremy McNicoll <jmcnicol@redhat.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
By representing each edge as its own device the channels are no longer
tied to being parented by the same smd device and as such an edge can
live as children of e.g. remoteproc instances.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
The code exectued by the interrupt handler depends on the values parsed
after requesting the irq, just to be save we should therefor move the
request_irq() call to be done after parsing the properties.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Multi-channel clients split between several drivers need a way to close
individual channels, as these drivers might be removed individually.
With this in place the responsibility of closing additionally opened
channels to the client as well only concerning smd about the primary
channel.
With this approach we will only trigger removal of SMD devices based on
the state of the primary channel, however we get in sync with how rpmsg
works.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
If we fail to get the hwspinlock due to probe defer, we shouldn't
print an error message. Just be silent in this case.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Read data fails sometimes because of a timeout that PMIC cannot transfer data
to PMIC wrap on time, extend the waiting time to 10ms to reduce the failed
rate.
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Register gpd_dev_ops.active_wakeup function to support keep power
during suspend state. And add flag to each power domain to
decide whether keep power during suspend or not.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Reading the DPD_REQ & DPD2_REQ registers returns the previous requests.
If we sets the current request bit with the returned value, then other
pads will be turned on or off unexpectedly.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Driver updates for ARM SoCs.
A slew of changes this release cycle. The reset driver tree, that we
merge through arm-soc for historical reasons, is also sizable this
time around.
Among the changes:
- clps711x: Treewide changes to compatible strings, merged here for simplicity.
- Qualcomm: SCM firmware driver cleanups, move to platform driver
- ux500: Major cleanups, removal of old mach-specific infrastructure.
- Atmel external bus memory driver
- Move of brcmstb platform to the rest of bcm
- PMC driver updates for tegra, various fixes and improvements
- Samsung platform driver updates to support 64-bit Exynos platforms
- Reset controller cleanups moving to devm_reset_controller_register() APIs
- Reset controller driver for Amlogic Meson
- Reset controller driver for Hisilicon hi6220
- ARM SCPI power domain support"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits)
ARM: ux500: consolidate base platform files
ARM: ux500: move soc_id driver to drivers/soc
ARM: ux500: call ux500_setup_id later
ARM: ux500: consolidate soc_device code in id.c
ARM: ux500: remove cpu_is_u* helpers
ARM: ux500: use CLK_OF_DECLARE()
ARM: ux500: move l2x0 init to .init_irq
mfd: db8500 stop passing around platform data
ASoC: ab8500-codec: remove platform data based probe
ARM: ux500: move ab8500_regulator_plat_data into driver
ARM: ux500: remove unused regulator data
soc: raspberrypi-power: add CONFIG_OF dependency
firmware: scpi: add CONFIG_OF dependency
video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip
input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip
pwm: clps711x: Changing the compatibility string to match with the smallest supported chip
serial: clps711x: Changing the compatibility string to match with the smallest supported chip
irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip
clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip
clk: clps711x: Changing the compatibility string to match with the smallest supported chip
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Olof Johansson:
"Improved and new platform support for various SoCs:
New SoC support:
- Broadcom BCM23550
- Freescale i.MX7Solo
- Qualcomm MDM9615
- Renesas r8a7792
Improvements:
- convert clps711x to multiplatform
- debug uart improvements for Atmel platforms
- Tango platform improvements: HOTPLUG_CPU, Suspend-to-ram
- OMAP tweaks and improvements to hwmod
- OMAP support for kexec on SMP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits)
ARM: davinci: fix build break because of undeclared dm365_evm_snd_data
ARM: s3c64xx: smartq: Avoid sparse warnings
ARM: sti: Implement dummy L2 cache's write_sec
ARM: STi: Update machine _namestr to be more generic.
arm: meson: explicitly select clk drivers
ARM: tango: add Suspend-to-RAM support
ARM: hisi: consolidate the hisilicon machine entries
ARM: tango: fix CONFIG_HOTPLUG_CPU=n build
MAINTAINERS: Update BCM281XX/BCM11XXX/BCM216XX entry
MAINTAINERS: Update BCM63XX entry
MAINTAINERS: Add NS2 entry
MAINTAINERS: Fix nsp false-positives
MAINTAINERS: Change L to M for Broadcom ARM/ARM64 SoC entries
ARM: debug: Enable DEBUG_BCM_5301X for Northstar Plus SoCs
ARM: clps711x: Switch to MULTIPLATFORM
ARM: clps711x: Remove boards support
ARM: clps711x: Add basic DT support
ARM: clps711x: Reduce static map size
ARM: SAMSUNG: Constify iomem address passed to s5p_init_cpu
ARM: oxnas: Change OX810SE default driver config
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers
Merge "Samsung drivers/soc update for v4.8, part 3" into next/drivers:
1. Fix size of allocation for Exynos SROM registers (too much was allocated).
2. Constify fix.
* tag 'samsung-drivers-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: pmu: Constify arrays with PMU data
memory: samsung: exynos-srom: Fix wrong count of registers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/drivers
Merge "Ux500 cleanups from Arnd" from Linus Walleij:
This is a set of cleanups for the Ux500 that reduce the number
of machine-local files and boardfile-type data for regulators
and ASoC.
* tag 'ux500-cleanup-bundle' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: consolidate base platform files
ARM: ux500: move soc_id driver to drivers/soc
ARM: ux500: call ux500_setup_id later
ARM: ux500: consolidate soc_device code in id.c
ARM: ux500: remove cpu_is_u* helpers
ARM: ux500: use CLK_OF_DECLARE()
ARM: ux500: move l2x0 init to .init_irq
mfd: db8500 stop passing around platform data
ASoC: ab8500-codec: remove platform data based probe
ARM: ux500: move ab8500_regulator_plat_data into driver
ARM: ux500: remove unused regulator data
|
|
As the ux500 id code is basically a standalone driver, we can move it
out of the arch code into drivers/soc/ux500.
This is a user-visible change, as it moves all the devices in sysfs
from /sys/devices/soc0/ to /sys/devices/ and leaves the soc0 node as a
separate device.
Originally the idea was to put all on-chip devices under the soc node,
and ux500 was the first platform to have this device, but later platforms
almost all didn't follow that pattern, so this makes the platform do
the same thing as everyone else.
Since the platform is really obsolete now, I am optimistic that nothing
will break after moving the devices around.
As the SoC driver no longer has access to the private header files,
I'm changing the code to instead look up the address of the backupram
from devicetree, which is a good idea anyway.
Finally, having a separate Kconfig symbol means the driver is now
optional and could even be a loadable module rather than always being
built-in if we allowed that for soc_device.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[Fixup mising Makefile, fixup BB_UID_BASE to fc0]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
We get a harmless warning if the RASPBERRYPI_POWER driver is enabled without
CONFIG_OF during compile testing:
warning: RASPBERRYPI_POWER selects PM_GENERIC_DOMAINS_OF which has unmet direct dependencies (PM_GENERIC_DOMAINS && OF)
There is no need to select PM_GENERIC_DOMAINS_OF if OF is set, so we can
replace the 'select' with a dependency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Eric Anholt <eric@anholt.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
soc/tegra: Changes for v4.8-rc1
Contains fixes and cleanups to the PMC driver, as well as some fixes for
the generic PM domain support and some prep work to support PCIe on 64-
bit ARM.
* tag 'tegra-for-4.8-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: Stub out PCIe IRQ workaround on 64-bit ARM
soc/tegra: pmc: Enable XUSB partitions on boot
soc/tegra: pmc: Initialise power partitions early
soc/tegra: pmc: Add specific error messages
soc/tegra: pmc: Use whitespace more consistently
soc/tegra: pmc: Don't probe PMC if early initialisation fails
soc/tegra: pmc: Add missing of_node_put()
soc/tegra: pmc: Ensure mutex is always initialised
soc/tegra: pmc: Don't populate SoC data until register space is mapped
soc/tegra: pmc: Fix early initialisation of PMC
soc/tegra: pmc: Ensure powergate is available when powering on
soc/tegra: pmc: Initialise resets associated with a power partition
soc/tegra: pmc: Use register definitions instead of magic values
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
Second Round of Renesas ARM Based SoC R-Car SYSC Updates for v4.8
* Prepare for handling SYSC interrupt configuration purely
from DT in the rcar-sysc driver for new SoCs, while preserving
backward compatibility with old DTBs for R-Car H1, H2, and M2-W
* Add R8A7792 support
* tag 'renesas-rcar-sysc2-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: rcar-sysc: Improve SYSC interrupt config in legacy wrapper
soc: renesas: rcar-sysc: Move SYSC interrupt config to rcar-sysc driver
soc: renesas: rcar-sysc: Make rcar_sysc_init() init the PM domains
soc: renesas: rcar-sysc: Fix uninitialized error code in rcar_sysc_pd_init()
soc: renesas: rcar-sysc: add R8A7792 support
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Arrays storing values for Power Management Unit for given sleep mode can
be made const.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers
Qualcomm ARM Based Driver Updates for v4.8
* Rework of SCM driver
* Add file patterns for Qualcomm Maintainers entry
* Add worker for wcnss_ctrl signaling
* Fixes for smp2p
* Update smem_state properties to match documentation
* Add SCM Peripheral Authentication service
* Expose SCM PAS command 10 as a reset controller
* tag 'qcom-drivers-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
firmware: qcom: scm: Expose PAS command 10 as reset-controller
firmware: qcom: scm: Peripheral Authentication Service
soc: qcom: Update properties for smem state referencing
soc: qcom: smp2p: Drop io-accessors
soc: qcom: smp2p: Correct addressing of outgoing value
soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the other components
firmware: qcom: scm: Add support for ARM64 SoCs
firmware: qcom: scm: Convert to streaming DMA APIS
firmware: qcom: scm: Generalize shared error map
firmware: qcom: scm: Use atomic SCM for cold boot
firmware: qcom: scm: Convert SCM to platform driver
MAINTAINERS: Add file patterns for qcom device tree bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The Tegra XHCI driver does not currently manage the Tegra XUSB power
partitions and so it these partitions have not been enabled by the
bootloader then the system will crash when probing the XHCI device.
While proper support for managing the power partitions is being
developed to the XHCI driver for Tegra, for now power on all the XUSB
partitions for USB host and super-speed on boot if the XHCI driver is
enabled.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
If CONFIG_PM_GENERIC_DOMAINS is not enabled, then power partitions
associated with a device will not be enabled automatically by the PM
core when the device is in use. To avoid situations where a device in
a power partition is to be used but the partition is not enabled,
initialise the power partitions for Tegra early in the boot process and
if CONFIG_PM_GENERIC_DOMAINS is not enabled, then power on all
partitions defined in the device-tree blob.
Note that if CONFIG_PM_GENERIC_DOMAINS is not enabled, after the
partitions are turned on, the clocks and resets used as part of the
sequence for turning on the partition are released again as they are no
longer needed by the PMC driver. Another benefit of this is that this
avoids any issues of sharing resets between the PMC driver and other
device drivers that may wish to independently control a particular
reset.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
When initialising a powergate, only a single error message is shown if
the initialisation fails. Add more error messages to give specific
details of what failed if the initialisation failed and remove the
generic failure message.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Use blank lines after blocks and before labels for consistency with the
existing code in the file.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Commit 0259f522e04f ('soc/tegra: pmc: Restore base address on probe
failure') fixes an issue where the PMC base address pointer is not
restored on probe failure. However, this fix creates another problem
where if early initialisation of the PMC driver fails and an initial
mapping for the PMC address space is not created, then when the PMC
device is probed, the PMC base address pointer will not be valid and
this will cause a crash when tegra_pmc_init() is called and attempts
to access a register.
Although the PMC address space is mapped a 2nd time during the probe
and so this could be fixed by populating the base address pointer
earlier during the probe, this adds more complexity to the code.
Moreover, the PMC probe also assumes the the soc data pointer is also
initialised when the device is probed and if not will also lead to a
crash when calling tegra_pmc_init_tsense_reset(). Given that if the
early initialisation does fail then something bad has happen, it seems
acceptable to allow the PMC device probe to fail as well. Therefore, if
the PMC base address pointer or soc data pointer are not valid when
probing the PMC device, WARN and return an error.
Fixes: 0259f522e04f ('soc/tegra: pmc: Restore base address on probe failure')
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add missing of_node_put() in PMC early initialisation function to avoid
leaking the device nodes.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
[treding@nvidia.com: squash in a couple more of_node_put() calls]
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The mutex used by the PMC driver may not be initialised if early
initialisation of the driver fails. If this does happen, then it could
be possible for callers of the public PMC functions to still attempt to
acquire the mutex. Fix this by initialising the mutex as soon as
possible to ensure it will always be initialised.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The public functions exported by the PMC driver use the presence of the
SoC data pointer to determine if the PMC device is configured and the
registers can be accessed. However, the SoC data is populated before the
PMC register space is mapped and this opens a window where the SoC data
pointer is valid but the register space has not yet been mapped which
could lead to a crash. Furthermore, if the mapping of the PMC register
space fails, then the SoC data pointer is not cleared and so would
expose a larger window where a crash could occur.
Fix this by initialising the SoC data pointer after the PMC register
space has been mapped.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
During early initialisation, the available power partitions for a given
device is configured as well as the polarity of the PMC interrupt. Both
of which should only be configured if there is a valid device node for
the PMC device. This is because the soc data used for configuring the
power partitions is only available if a device node for the PMC is found
and the code to configure the interrupt polarity uses the device node
pointer directly.
Some early device-tree images may not have this device node and so fix
this by ensuring the device node pointer is valid when configuring these
items.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The function tegra_power_sequence_power_up() is a public function used
to power on a partition. When this function is called, we do not check
to see if the partition being powered up is valid/available. Fix this
by checking to see that the partition is valid/available.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
When registering the Tegra power partitions with the generic PM domain
framework, the current state of the each partition is checked and used
as the default state for the partition. However, the state of each reset
associated with the partition is not initialised and so it is possible
that the state of the resets are not in the expected state. For example,
if a partition is on, then the resets should be de-asserted and if the
partition is off, the resets should be asserted.
There have been cases where the bootloader has powered on a partition
and only de-asserted some of the resets to some of the devices in the
partition. This can cause accesses to these devices to hang the system
when the kernel boots and attempts to probe these devices.
Ideally, the driver for the device should ensure the reset has been
de-asserted when probing, but the resets cannot be shared between the
PMC driver (that needs to de-assert/assert the reset when turning the
partition on or off) and another driver because we cannot ensure the
reset is in the correct state.
To ensure the resets are in the correct state, when using the generic
PM domain framework, put each reset associated with the partition in
the correct state (based upon the partition's current state) when
obtaining the resets for a partition.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Align SYSC interrupt configuration in the legacy wrapper with the DT
version:
- Mask SYSC interrupt sources before enabling them (doesn't matter
much as they're disabled at the GIC level anyway),
- Make sure not to clear reserved SYSCIMR bits that were set before.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
On R-Car H1 and Gen2, the SYSC interrupt registers are always configured
using hardcoded values in platform code. For R-Car Gen2, values are
provided for H2 and M2-W only, other SoCs are not yet supported, and
never will be.
Move this configuration from SoC-specific platform code to the
rcar_sysc_init() wrapper, so it can be skipped if the SYSC is configured
from DT. This would be the case not only for H1, H2, and M2-W using a
modern DTS, but also for other R-Car Gen2 SoCs not supported by the
platform code, relying purely on DT.
There is no longer a need to return the mapped register block, hence
make the function return void.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Let rcar_sysc_init() trigger initialization of the SYSC PM domains from
DT if called before the early_initcall.
On failure, it falls back to mapping the passed register block, as
before.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
On success, rcar_sysc_pd_init() returns an uninitialized error code.
Use the return value of of_genpd_add_provider_onecell() to fix this.
This went unnoticed, as early_initcall() doesn't care about the return
value.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Update the property names to match device tree bindings, the correct
values should be qcom,smem-states and qcom,smem-state-names.
Also update the #qcom,smem-state-cells for consistency, before we merge
any users of these properties.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
SMEM is now mapped write-combine and we can use memcpy to access the
name of the entires.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
The valid_entries index should not be incremented until after we have
acquired the pointer to the value, or we will read and write data one
item off.
Fixes: 50e99641413e ("soc: qcom: smp2p: Qualcomm Shared Memory Point to Point")
Cc: stable@vger.kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
We need the signal from wcnss_ctrl indicating that the firmware is up
and running before we can communicate with the other components of the
chip. So make these other components children of the wcnss_ctrl device,
so they can be probed in order.
The process seems to take between 1/2-5 seconds, so this is done in a
worker, instead of holding up the probe.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
into next/drivers
This pull request contains drivers related changes for Broadcom SoCs:
- Florian moves drivers/soc/brcmstb to drivers/soc/bcm/brcmstb to be consistent with
how other SoCs are doing it
- Chris provides a reset driver which is common to the BCM21664 and BCM23550 SoCs
- Ben fixes a warning by providing the appropriate include file
* tag 'arm-soc/for-4.8/drivers' of http://github.com/Broadcom/stblinux:
soc: brcmstb: fix warning from missing include
power: Introduce Broadcom kona reset driver
soc: Move brcmstb to bcm/brcmstb
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Add support for R-Car V2H (R8A7792) SoC power areas to the SYSC driver.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
Renesas ARM Based SoC R-Car SYSC Updates for v4.8
e0c98b9171ee soc: renesas: rcar-sysc: Add support for R-Car M3-W power areas
74699228b99d soc: renesas: Add r8a7796 SYSC PM Domain Binding Definitions
2ff1bf77e4d4 soc: renesas: rcar-sysc: Document r8a7796 support
* tag 'renesas-rcar-sysc-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: rcar-sysc: Add support for R-Car M3-W power areas
soc: renesas: Add r8a7796 SYSC PM Domain Binding Definitions
soc: renesas: rcar-sysc: Document r8a7796 support
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Use register definitions for the main SoC reset operation instead of
hard-coding magic values. Note that the PMC_RST_STATUS register isn't
actually accessed, but since it is mentioned in a comment the
definitions are added for completeness.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
