summaryrefslogtreecommitdiff
path: root/drivers/soc
AgeCommit message (Collapse)Author
2018-04-13Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The large diff this time around is from the addition of a new clk driver for the TI Davinci family of SoCs. So far those clks have been supported with a custom implementation of the clk API in the arch port instead of in the CCF. With this driver merged we're one step closer to having a single clk API implementation. The other large diff is from the Amlogic clk driver that underwent some major surgery to use regmap. Beyond that, the biggest hitter is Samsung which needed some reworks to properly handle clk provider power domains and a bunch of PLL rate updates. The core framework was fairly quiet this round, just getting some cleanups and small fixes for some of the more esoteric features. And the usual set of driver non-critical fixes, cleanups, and minor additions are here as well. Core: - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops - debugfs ops macroized to shave some lines of boilerplate code - Always calculate the phase instead of caching it in clk_get_phase() - More __must_check on bulk clk APIs New Drivers: - TI's Davinci family of SoCs - Intel's Stratix10 SoC - stm32mp157 SoC - Allwinner H6 CCU - Silicon Labs SI544 clock generator chip - Renesas R-Car M3-N and V3H SoCs - i.MX6SLL SoCs Removed Drivers: - ST-Ericsson AB8540/9540 Updates: - Mediatek MT2701 and MT7622 audsys support and MT2712 updates - STM32F469 DSI and STM32F769 sdmmc2 support - GPIO clks can sleep now - Spreadtrum SC9860 RTC clks - Nvidia Tegra MBIST workarounds and various minor fixes - Rockchip phase handling fixes and a memory leak plugged - Renesas drivers switch to readl/writel from clk_readl/clk_writel - Renesas gained CPU (Z/Z2) and watchdog support - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support - Qualcomm PM8921 PMIC XO buffers - Amlogic migrates to regmap APIs - TI Keystone clk latching support - Allwinner H3 and H5 video clk fixes - Broadcom BCM2835 PLLs needed another bit to enable - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix - i.MX6UL/ULL epdc_podf support - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (233 commits) clk: davinci: add a reset lookup table for psc0 clk: imx: add clock driver for imx6sll dt-bindings: imx: update clock doc for imx6sll clk: imx: add new gate/gate2 wrapper funtion clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux clk: cs2000: set pm_ops in hibernate-compatible way clk: bcm2835: De-assert/assert PLL reset signal when appropriate clk: imx7d: Move clks_init_on before any clock operations clk: imx7d: Correct ahb clk parent select clk: imx7d: Correct dram pll type clk: imx7d: Add USB clock information clk: socfpga: stratix10: add clock driver for Stratix10 platform dt-bindings: documentation: add clock bindings information for Stratix10 clk: ti: fix flag space conflict with clkctrl clocks clk: uniphier: add additional ethernet clock lines for Pro4 clk: uniphier: add SATA clock control support clk: uniphier: add PCIe clock control support clk: Add driver for the si544 clock generator chip clk: davinci: Remove redundant dev_err calls clk: uniphier: add ethernet clock control support for PXs3 ...
2018-04-10Merge tag 'rproc-v4.17' of git://github.com/andersson/remoteprocLinus Torvalds
Pull remoteproc updates from Bjorn Andersson: - add support for generating coredumps for remoteprocs using devcoredump - add the Qualcomm sysmon driver for intra-remoteproc crash handling - a number of fixes in Qualcomm and IMX drivers * tag 'rproc-v4.17' of git://github.com/andersson/remoteproc: remoteproc: fix null pointer dereference on glink only platforms soc: qcom: qmi: add CONFIG_NET dependency remoteproc: imx_rproc: Slightly simplify code in 'imx_rproc_probe()' remoteproc: imx_rproc: Re-use existing error handling path in 'imx_rproc_probe()' remoteproc: imx_rproc: Fix an error handling path in 'imx_rproc_probe()' samples: Introduce Qualcomm QMI sample client remoteproc: qcom: Introduce sysmon remoteproc: Pass type of shutdown to subdev remove remoteproc: qcom: Register segments for core dump soc: qcom: mdt-loader: Return relocation base remoteproc: Rename "load_rsc_table" to "parse_fw" remoteproc: Add remote processor coredump support remoteproc: Remove null character write of shared mem
2018-04-05Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "The main addition this time around is the new ARM "SCMI" framework, which is the latest in a series of standards coming from ARM to do power management in a platform independent way. This has been through many review cycles, and it relies on a rather interesting way of using the mailbox subsystem, but in the end I agreed that Sudeep's version was the best we could do after all. Other changes include: - the ARM CCN driver is moved out of drivers/bus into drivers/perf, which makes more sense. Similarly, the performance monitoring portion of the CCI driver are moved the same way and cleaned up a little more. - a series of updates to the SCPI framework - support for the Mediatek mt7623a SoC in drivers/soc - support for additional NVIDIA Tegra hardware in drivers/soc - a new reset driver for Socionext Uniphier - lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and drivers/firmware and drivers/reset across platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits) reset: uniphier: add ethernet reset control support for PXs3 reset: stm32mp1: Enable stm32mp1 reset driver dt-bindings: reset: add STM32MP1 resets reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset control reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependency reset: modify the way reset lookup works for board files reset: add support for non-DT systems clk: scmi: use devm_of_clk_add_hw_provider() API and drop scmi_clocks_remove firmware: arm_scmi: prevent accessing rate_discrete uninitialized hwmon: (scmi) return -EINVAL when sensor information is unavailable amlogic: meson-gx-socinfo: Update soc ids soc/tegra: pmc: Use the new reset APIs to manage reset controllers soc: mediatek: update power domain data of MT2712 dt-bindings: soc: update MT2712 power dt-bindings cpufreq: scmi: add thermal dependency soc: mediatek: fix the mistaken pointer accessed when subdomains are added soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC soc: mediatek: avoid hardcoded value with bus_prot_mask dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC ...
2018-04-05Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "This release brings up a new platform based on the old ARM9 core: the Nuvoton NPCM is used as a baseboard management controller, competing with the better known ASpeed AST2xx series. Another important change is the addition of ARMv7-A based chips in mach-stm32. The older parts in this platform are ARMv7-M based microcontrollers, now they are expanding to general-purpose workloads. The other changes are the usual defconfig updates to enable additional drivers, lesser bugfixes. The largest updates as often are the ongoing OMAP cleanups, but we also have a number of changes for the older PXA and davinci platforms this time. For the Renesas shmobile/r-car platform, some new infrastructure is needed to make the watchdog work correctly. Supporting Multiprocessing on Allwinner A80 required a significant amount of new code, but is not doing anything unexpected" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits) arm: npcm: modify configuration for the NPCM7xx BMC. MAINTAINERS: update entry for ARM/berlin ARM: omap2: fix am43xx build without L2X0 ARM: davinci: da8xx: simplify CFGCHIP regmap_config ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data ARM: multi_v7_defconfig: add NXP FlexCAN IP support ARM: multi_v7_defconfig: enable thermal driver for i.MX devices ARM: multi_v7_defconfig: add RN5T618 PMIC family support ARM: multi_v7_defconfig: add NXP graphics drivers ARM: multi_v7_defconfig: add GPMI NAND controller support ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs ARM: multi_v7_defconfig: configure I2C driver built-in arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE ARM: imx: fix imx6sll-only build ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well ARM: mxs_defconfig: Re-sync defconfig ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver ARM: imx_v4_v5_defconfig: Re-sync defconfig arm64: defconfig: enable stmmac ethernet to defconfig ARM: EXYNOS: Simplify code in coupled CPU idle hot path ...
2018-04-05Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates from Arnd Bergmann: "This is the usual set of changes for device trees, with over 700 non-merged changesets. There is an ongoing set of dtc warning fixes and the usual bugfixes, cleanups and added device support. The most interesting bit as usual is support for new machines listed below: - The Allwinner H6 makes its debut with the Pine-H64 board, and we get two new machines based on its older siblings: the H5 based OrangePi Zero+ and the A64 based Teres-I Laptop from Olimex. On the 32-bit side, we add The Olimex som204 based on Allwinner A20, and the Banana Pi M2 Zero development board (based on H2). - NVIDIA adds support for Tegra194 aka "Xavier", plus their p2972 development board and p2888 CPU module. - The Nuvoton npcm750 is a BMC that was newly added, for now we only support running on the evaluation board. - STmicroelectronics stm32 gains support for the stm32mp157c and two evaluation boards. - The Toradex Colibri board family grows a few members based on the i.MX6ULL variant. - The Advantec DMS-BA16 is a Qseven module using the NXP i.MX6 family of chips. - The Phytec phyBOARD Mira is a family of industrial boards based on i.MX6. For now, four models get added. - TI am335x based PDU-001 is an industrial embedded machine used for traffic monitoring - The Aspeed platform now supports running on the BMC on the Qualcomm Centriq 2400 server - Samsung Exynos4 based Galaxy S3 is a family of mobile phones Qualcomm msm8974 based Galaxy S5 is a rather different phone made by the same company. - The Xilinx Zynq and ZynqMP platforms now gained a lot of dts file for the various boards made by Xilinx themselves, as well as the Digilent Zybo Z7. - The ARM Versatile family now supports the "IB2" interface board. - The Renesas H2 based "Stout" and the H3 based Salvator-X are more evaluation boards named after a kind of beer, as most of them are. The r8a77980 (V3H) based "Condor" apparently doesn't follow that tradition. ;-) - ROC-RK3328-CC is a simple developement board from the Libre Computer Project, based on the Rockchips RK3328 SoC - Haiku is another development board plus Qseven module based on Rockchips RK3368 and made by Theobroma Systems" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (701 commits) arm: dts: modify Nuvoton NPCM7xx device tree structure arm: dts: modify Makefile NPCM750 configuration name arm: dts: modify clock binding in NPCM750 device tree arm: dts: modify timer register size in NPCM750 device tree arm: dts: modify UART compatible name in NPCM750 device tree arm: dts: add watchdog device to NPCM750 device tree arm64: dts: uniphier: add ethernet node for PXs3 ARM: dts: uniphier: add pinctrl groups of ethernet for second instance arm: dts: kirkwood*.dts: use SPDX-License-Identifier for board using GPL-2.0+ arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0+/MIT arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0 arm: dts: armada-385-turris-omnia: use SPDX-License-Identifier arm: dts: armada-385-db-ap: use SPDX-License-Identifier arm: dts: armada-388-rd: use SPDX-License-Identifier arm: dts: armada-xp-db-xc3-24g4xg: use SPDX-License-Identifier arm: dts: armada-xp-db-dxbc2: use SPDX-License-Identifier arm: dts: armada-370-db: use SPDX-License-Identifier arm: dts: armada-*.dts: use SPDX-License-Identifier for most of the Armada based board arm: dts: armada-xp-98dx: use SPDX-License-Identifier for prestara 98d SoCs arm: dts: armada-*.dtsi: use SPDX-License-Identifier for most of the Armada SoCs ...
2018-03-28Merge tag 'v4.17-rockchip-drivers-1' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers Pull "Rockchip driver changes for 4.17" from Heiko Stübner: Rockchip soc drivers containing conversion of the power-domain driver to use the clk-bulk APIs and two more socs to disable jtag-switching. On the plus-side the issue we see with that are _supposed_ to be fixed in hardware in upcoming socs, so maybe this can be the last of those. * tag 'v4.17-rockchip-drivers-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: soc: rockchip: power-domain: Add a sanity check on pd->num_clks soc: rockchip: power-domain: use clk_bulk APIs soc: rockchip: disable jtag switching for RK3128 SoCs soc: rockchip: disable jtag switching for RK3228/RK3229 SoCs
2018-03-27soc: qcom: qmi: add CONFIG_NET dependencyArnd Bergmann
Access to the socket API and the root network namespace is only available when networking is enabled: ERROR: "kernel_sendmsg" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "sock_release" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "sock_create_kern" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "kernel_getsockname" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "init_net" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "kernel_recvmsg" [drivers/soc/qcom/qmi_helpers.ko] undefined! Adding a dependency on CONFIG_NET lets us build it in all randconfig builds. Fixes: 9b8a11e82615 ("soc: qcom: Introduce QMI encoder/decoder") Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-27Merge tag 'qcom-drivers-for-4.17' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers Pull "Qualcomm ARM Based Driver Updates for v4.17" from Andy Gross: * Fix NV upload increment in wcnss_ctrl * Add support in rmtfs-mem driver for assigning memory * tag 'qcom-drivers-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux: soc: qcom: wcnss_ctrl: Fix increment in NV upload soc: qcom: rmtfs-mem: Add support for assigning memory to remote
2018-03-27Merge tag 'amlogic-drivers' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/drivers Pull "Amlogic driver updates for v4.17" from Kevin Hilman: - socinfo: add more IDs for newer SoC detection - firmware: update init to use module_platform_driver_probe - soc: mix. VPU power controller fixes * tag 'amlogic-drivers' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: amlogic: meson-gx-socinfo: Update soc ids firmware: meson-sm: rework meson_sm_init to use module_platform_driver_probe meson-gx-socinfo: make local function meson_gx_socinfo_init static meson-mx-socinfo: Make local function meson_mx_socinfo_init() static soc: amlogic: meson-gx-pwrc-vpu: fix error on shutdown when domain is powered off soc: amlogic: meson-gx-pwrc-vpu: don't print error message on probe deferral
2018-03-27Merge tag 'v4.16-next-soc' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/drivers Pull "ARM: mediatek: updates for soc drivers for v4.16-next" from Matthias Brugger: scpsy: - mt2712: update power domains to reflect design changes in the SoC - fix initialisation of power subdomains - add support for mt7623a SoC - use defines for mt2701 bus protection mask * tag 'v4.16-next-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: soc: mediatek: update power domain data of MT2712 dt-bindings: soc: update MT2712 power dt-bindings soc: mediatek: fix the mistaken pointer accessed when subdomains are added soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC soc: mediatek: avoid hardcoded value with bus_prot_mask dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC
2018-03-27Merge tag 'tegra-for-4.17-soc-2' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers Pull "soc/tegra: Changes for v4.17-rc1" from Thierry Reding: This contains more Tegra194 support as well as an implementation for the MBIST workaround needed to avoid some memory-related issues on Tegra210. * tag 'tegra-for-4.17-soc-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: pmc: Use the new reset APIs to manage reset controllers soc/tegra: pmc: Pass PMC to tegra_powergate_power_up() soc/tegra: pmc: MBIST work around for Tegra210 soc/tegra: pmc: Add Tegra194 compatibility string soc/tegra: Add Tegra194 SoC configuration option
2018-03-27Merge tag 'renesas-soc-for-v4.17' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc Pull "Renesas ARM Based SoC Updates for v4.17" from Simon Horman: 01d675f159e0 ARM: shmobile: rcar-gen2: Add watchdog support 58adf1ba0d22 ARM: shmobile: Add watchdog support * SoC - Identify R-Car V3H (r8a77980) and M3N (r8a77965) - Enable R-Car Gen2 regulator quirk for Stout board with H3 (r8a7790) SoC Marek Vaust says "Regulator setup is suboptimal on H2 Stout too. The Stout newly has two DA9210 regulators, so the quirk is extended to handle another DA9210 at i2c address 0x70." - Add watchdog support This is the SoC portion of the following solution. It is not yet enabled in DT as it is not functional without clock dependencies in place. Fabrizio Castro says "this series has been around for some time as RFC, and it has collected useful comments from the community along the way. The solution proposed by this patch set works for most R-Car Gen2 and RZ/G1 devices, but not all of them. We now know that for some R-Car Gen2 early revisions there is no proper software fix. Anyway, no product has been built around early revisions, but development boards mounting early revisions (basically prototypes) are still out there. As a result, this series isn't enabling the internal watchdog on R-Car Gen2 boards, developers may enable it in board specific device trees if needed. This series has been tested by me on the iwg20d, iwg22d, Lager, Alt, and Koelsch boards. The problem =========== To deal with SMP on R-Car Gen2 and RZ/G1, we install a reset vector to ICRAM1 and we program the [S]BAR registers so that when we turn ON the non-boot CPUs they are redirected to the reset vector installed by Linux in ICRAM1, and eventually they continue the execution to RAM, where the SMP bring-up code will take care of the rest. The content of the [S]BAR registers survives a watchdog triggered reset, and as such after the watchdog fires the boot core will try and execute the SMP bring-up code instead of jumping to the bootrom code. The fix ======= The main strategy for the solution is to let the reset vector decide if it needs to jump to shmobile_boot_fn or to the bootrom code. In a watchdog triggered reset scenario, since the [S]BAR registers keep their values, the boot CPU will jump into the newly designed reset vector, the assembly routine will eventually test WOVF (a bit in register RWTCSRA that indicates if the watchdog counter has overflown, the value of this bit gets retained in this scenario), and jump to the bootrom code which will in turn load up the bootloader, etc. When bringing up SMP or using CPU hotplug, the reset vector will jump to shmobile_boot_fn instead." * R-Car Rst - Add support for R-Car V3H (r8a77980) and V3H (r8a77980) * R-Car SYSC - Mark rcar_sysc_matches[] __initconst Geert Uytterhoeven says "This frees another 1764 bytes (arm32/shmobile_defconfig) or 1000 bytes (arm64/renesas_defconfig) of memory after kernel init." - Fix power area parents Sergei Shtylyov says "According to the figure 9.2(b) of the R-Car Series, 3rd Generation User’s Manual: Hardware Rev. 0.80 the A2IRn and A2SCn power areas in R8A77970 have the A3IR area as a parent, thus the SYSC driver has those parents wrong.." - Add support for R-Car V3H (r8a77980) and V3H (r8a77980) * tag 'renesas-soc-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: rcar-gen2: Add watchdog support ARM: shmobile: Add watchdog support ARM: shmobile: rcar-gen2: Fix error check in regulator quirk soc: renesas: rcar-rst: Add support for R-Car M3-N ARM: shmobile: stout: enable R-Car Gen2 regulator quirk soc: renesas: rcar-sysc: Add R-Car M3-N support soc: renesas: Identify R-Car M3-N soc: renesas: rcar-sysc: add R8A77980 support dt-bindings: power: add R8A77980 SYSC power domain definitions soc: renesas: r8a77970-sysc: fix power area parents soc: renesas: rcar-rst: Enable watchdog as reset trigger for Gen2 soc: renesas: rcar-rst: add R8A77980 support soc: renesas: identify R-Car V3H soc: renesas: rcar-sysc: Mark rcar_sysc_matches[] __initconst
2018-03-27Merge tag 'amlogic-dt64' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Pull "Amlogic 64-bit DT updates for v4.17" from Kevin Hilman: - AXG: add/enable UART_A, I2C, RMII, system controller, HW RNG - accept MAC from u-boot environment - misc. fixes * tag 'amlogic-dt64' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-gx: make efuse read-only ARM64: dts: meson: bump mali450 clk to 744MHz meson-gx-socinfo: Add package id for S905H ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2 ARM64: dts: meson: reduce odroid-c2 eMMC maximum rate ARM64: dts: amlogic: Convert to new-style SPDX license identifiers ARM64: dts: meson-axg: fix pwm_AO_cd compatible ARM64: dts: meson-axg: add sec_AO system controller ARM64: dts: meson: accept MAC addr from u-boot environment ARM64: dts: meson s905x: accept MAC addr from u-boot environment ARM64: dts: meson-axg: enable the UART_A controller ARM64: dts: meson-axg: complete the pinctrl info for UART_AO_A ARM64: dts: meson-axg: uart: Add the pinctrl info description ARM64: dts: meson-axg: uart: drop legacy compatible name from EE UART ARM64: dts: meson-axg: add RMII pins for ethernet controller ARM64: dts: meson-axg: enable I2C Master-1 for the audio speaker ARM64: dts: meson-axg: describe pin DT info for I2C controller ARM64: dts: meson-axg: add I2C DT info for Meson-AXG SoC ARM64: meson-axg: enable hardware rng
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-19amlogic: meson-gx-socinfo: Update soc idsNeil Armstrong
Updates the Amlogic Meson SoCs IDs for the Armv8 based SoCs. It includes the new families and packages. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-03-19soc/tegra: pmc: Use the new reset APIs to manage reset controllersVivek Gautam
Make use of of_reset_control_array_get_exclusive() to manage an array of reset controllers available with the device. Cc: Jon Hunter <jonathanh@nvidia.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> [p.zabel@pengutronix.de: switch to hidden reset control array] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-19soc: mediatek: update power domain data of MT2712weiyi.lu@mediatek.com
1. split MFG power domain into MFG/MFG_SC1/MFG_SC2/MFG_SC3 according to MT2712 ECO design change 2. add subdomain support for MT2712 Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-15Merge tag 'imx-drivers-4.17' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers Pull "i.MX drivers update for 4.17" from Shawn Guo: - Set GENPD_FLAG_ALWAYS_ON flag for ARM power domain to avoid incorrect power state in sysfs pm_genpd_summary output. * tag 'imx-drivers-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: gpc: ARM power domain should be always-on
2018-03-14soc/fsl/qbman: fix issue in qman_delete_cgr_safe()Madalin Bucur
The wait_for_completion() call in qman_delete_cgr_safe() was triggering a scheduling while atomic bug, replacing the kthread with a smp_call_function_single() call to fix it. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-11soc: mediatek: fix the mistaken pointer accessed when subdomains are addedSean Wang
Fix the pointer to struct scp_subdomian not being moved forward when each sub-domain is expected to be iteratively added through pm_genpd_add_subdomain call. Cc: stable@vger.kernel.org Fixes: 53fddb1a66dd ("soc: mediatek: reduce code duplication of scpsys_probe across all SoCs") Reported-by: Weiyi Lu <weiyi.lu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-11soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoCSean Wang
Add SCPSYS power domain driver for MT7623A SoC. The MT7623A's power domains are the subset of MT7623 SoC's ones. As MT7623 SoC has full features whereas MT7623A is being designed just for router applications. Thus, MT7623A doesn't include those power domains multimedia function belongs to. In order to avoid certain errors undoubtedly happening at registering those power domains on MT7623A SoC using the existing MT7623 SCPSYS driver, it's required to define another setup specifically for MT7623A SoC. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-11soc: mediatek: avoid hardcoded value with bus_prot_maskSean Wang
use a meaningful definition for bus_prot_mask instead of just hardcoded for it. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-08soc: qcom: wcnss_ctrl: Fix increment in NV uploadBjorn Andersson
hdr.len includes both the size of the header and the fragment, so using this when stepping through the firmware causes us to skip 16 bytes every chunk of 3072 bytes; causing only the first fragment to actually be valid data. Instead use fragment size steps through the firmware blob. Fixes: ea7a1f275cf0 ("soc: qcom: Introduce WCNSS_CTRL SMD client") Reported-by: Will Newton <will.newton@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-03-08soc: qcom: rmtfs-mem: Add support for assigning memory to remoteBjorn Andersson
On some platform the remote processor's memory map is not statically configured in TrustZone, so each memory region that is to be accessed by the remote needs a call into TrustZone to set up the remote's permissions. Implement this for the rmtfs memory driver, to give the modem on 8996 access to the shared file system buffers. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-03-08soc/tegra: pmc: Pass PMC to tegra_powergate_power_up()Thierry Reding
tegra_powergate_sequence_power_up() makes up a struct tegra_powergate from scratch in order to reuse the same code as used by the generic PM domain implementation. However, subsequent patches will need to access the struct tegra_pmc * embedded in the powergate structure, so we need to make sure we always pass it in. Tested-by: Hector Martin <marcan@marcan.st> Tested-by: Andre Heider <a.heider@gmail.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08soc/tegra: pmc: MBIST work around for Tegra210Peter De Schrijver
Apply the memory built-in self test work around when ungating certain Tegra210 power domains. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Hector Martin <marcan@marcan.st> Tested-by: Andre Heider <a.heider@gmail.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08soc/tegra: pmc: Add Tegra194 compatibility stringMikko Perttunen
The Tegra194 PMC is mostly compatible with Tegra186, including in all currently supported features. As such, add a new compatibility string but point to the existing Tegra186 SoC data for now. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08soc/tegra: Add Tegra194 SoC configuration optionMikko Perttunen
Add the configuration option to enable support for the Tegra194 system- on-chip. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-07meson-gx-socinfo: Add package id for S905HNeil Armstrong
The S905H can be found on the Wetek Hub and Play2 boards. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-03-07Merge tag 'samsung-drivers-4.17' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers Pull "Samsung soc drivers changes for v4.17" from Krzysztof Kozłowski: 1. Add SPDX license identifiers. 2. Populate children syscon nodes in PMU driver to properly model HW in DeviceTree. * tag 'samsung-drivers-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: pmu: Populate children syscon nodes soc: samsung: Add SPDX license identifiers to headers memory: samsung: Add SPDX license identifiers
2018-03-07Merge tag 'omap-for-v4.17/am-pm-signed' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc Pull "Add am335x and am437x PM code for v4.17" from Tony Lindgren: This series of changes from Dave Gerlach adds the PM related code to allow low-power suspend states. The code consists of the SoC specific assembly code and a related PM driver. * tag 'omap-for-v4.17/am-pm-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: soc: ti: Add pm33xx driver for basic suspend support ARM: OMAP2+: pm33xx-core: Add platform code needed for PM ARM: OMAP2+: Introduce low-level suspend code for AM43XX ARM: OMAP2+: Introduce low-level suspend code for AM33XX
2018-03-06clk: samsung: exynos5250: Move PD-dependent clocks to Exynos5 sub-CMUMarek Szyprowski
Clocks related to DISP1 block require special handling for power domain turn on/off sequences. Till now this was handled by Exynos power domain driver, but that approach was limited only to some special cases. This patch moves handling of those operations to clock controller driver. This gives more flexibility and allows fine tune values of some clock-specific registers. This patch moves handling of those mentioned clocks to Exynos5 sub-CMU driver instantiated from Exynos5250 driver. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2018-03-06clk: samsung: exynos5420: Move PD-dependent clocks to Exynos5 sub-CMUMarek Szyprowski
Clocks related to DISP, GSC and MFC blocks require special handling for power domain turn on/off sequences. Till now this was handled by Exynos power domain driver, but that approach was limited only to some special cases. This patch moves handling of those operations to clock controller driver. This gives more flexibility and allows fine tune values of some clock-specific registers. This patch moves handling of those mentioned clocks to Exynos5 sub-CMU driver instantiated from Exynos5420 driver. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2018-03-06soc: samsung: pm_domains: Add blacklisting clock handlingMarek Szyprowski
Handling of clock reparenting will be move to clock controller driver, so add possibility to blacklist clock handling on systems, where the clock controller already does all needed operations. This is needed to avoid potential deadlock on clock reparenting during power domain on/off procedure. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2018-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
All of the conflicts were cases of overlapping changes. In net/core/devlink.c, we have to make care that the resouce size_params have become a struct member rather than a pointer to such an object. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-05soc: rockchip: power-domain: Add a sanity check on pd->num_clksJeffy Chen
The of_count_phandle_with_args() can fail and return error(for example, rk3399 pd_vio doesn't have clocks). That would break the pd probe. Add a sanity check on pd->num_clks to avoid that. Fixes: 65084121d59d ("soc: rockchip: power-domain: use clk_bulk APIs") Reported-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Tested-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-03-05soc: rockchip: power-domain: use clk_bulk APIsJeffy Chen
Use clk_bulk APIs, and also add error handling for clk enable. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-03-05soc: rockchip: disable jtag switching for RK3128 SoCsXiao Yao
Disable IO function switching between sdmmc and jtag for RK3128 SoCs. Signed-off-by: Xiao Yao <xiaoyao@rock-chips.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-02-28Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "This is the first set of bugfixes for ARM SoCs, fixing a couple of stability problems, mostly on TI OMAP and Rockchips platforms: - OMAP2 hwmod clocks must be enabled in the correct order - OMAP3 Wakeup from resume through PRM IRQ was unreliable - one regression on OMAP5 caused by a kexec fix - Rockchip ethernet needs some settings for stable operation on Rock64 - Rockchip based Chrombook Plus needs another clock setting for stable display suspend/resume - Rockchip based phyCORE-RK3288 was able to run at an invalid CPU clock frequency - Rockchip MMC link was sometimes unreliable - multiple fixes to avoid crashes in the Broadcom STB DPFE driver Other minor changes include: - Devicetree fixes for incorrect hardware description (rockchip, omap, Gemini, amlogic) - some MAINTAINER file updates to correct email and git addresses - some fixes addressing 'make W=1' dtc warnings (broadcom, amlogic, cavium, qualcomm, hisilicon, zx) - fixes for LTO-compilation (orion, davinci, clps711x) - one fix for an incorrect Kconfig errata selection - a memory leak in the OMAP timer driver - a kernel data leak in OMAP1 debugfs files" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) MAINTAINERS: update entries for ARM/STM32 ARM: dts: bcm283x: Move arm-pmu out of soc node ARM: dts: bcm283x: Fix unit address of local_intc ARM: dts: NSP: Fix amount of RAM on BCM958625HR ARM: dts: Set D-Link DNS-313 SATA to muxmode 0 ARM: omap2: set CONFIG_LIRC=y in defconfig ARM: dts: imx6dl: Include correct dtsi file for Engicam i.CoreM6 DualLite/Solo RQS memory: brcmstb: dpfe: support new way of passing data from the DCPU memory: brcmstb: dpfe: fix type declaration of variable "ret" memory: brcmstb: dpfe: properly mask vendor error bits ARM: BCM: dts: Remove leading 0x and 0s from bindings notation ARM: orion: fix orion_ge00_switch_board_info initialization ARM: davinci: mark spi_board_info arrays as const ARM: clps711x: mark clps711x_compat as const arm: zx: dts: Remove leading 0x and 0s from bindings notation arm64: dts: Remove leading 0x and 0s from bindings notation arm64: dts: cavium: fix PCI bus dtc warnings MAINTAINERS: ARM: at91: update my email address soc: imx: gpc: de-register power domains only if initialized ARM: dts: rockchip: Fix DWMMC clocks ...
2018-02-27soc: ti: Add pm33xx driver for basic suspend supportDave Gerlach
AM335x and AM437x support various low power modes as documented in section 8.1.4.3 of the AM335x Technical Reference Manual and section 6.4.3 of the AM437x Technical Reference Manual. DeepSleep0 mode offers the lowest power mode with limited wakeup sources without a system reboot and is mapped as the suspend state in the kernel. In this state, MPU and PER domains are turned off with the internal RAM held in retention to facilitate the resume process. As part of the boot process, the assembly code is copied over to OCMCRAM so it can be executed to turn of the EMIF and put DDR into self refresh. Both platforms have a Cortex-M3 (WKUP_M3) which assists the MPU in DeepSleep0 entry and exit. WKUP_M3 takes care of the clockdomain and powerdomain transitions based on the intended low power state. MPU needs to load the appropriate WKUP_M3 binary onto the WKUP_M3 memory space before it can leverage any of the PM features like DeepSleep. This loading is handled by the remoteproc driver wkup_m3_rproc. Communication with the WKUP_M3 is handled by a wkup_m3_ipc driver that exposes the specific PM functionality to be used the PM code. In the current implementation when the suspend process is initiated, MPU interrupts the WKUP_M3 to let it know about the intent of entering DeepSleep0 and waits for an ACK. When the ACK is received MPU continues with its suspend process to suspend all the drivers and then jumps to assembly in OCMC RAM. The assembly code puts the external RAM in self-refresh mode, gates the MPU clock, and then finally executes the WFI instruction. Execution of the WFI instruction with MPU clock gated triggers another interrupt to the WKUP_M3 which then continues with the power down sequence wherein the clockdomain and powerdomain transition takes place. As part of the sleep sequence, WKUP_M3 unmasks the interrupt lines for the wakeup sources. WFI execution on WKUP_M3 causes the hardware to disable the main oscillator of the SoC and from here system remains in sleep state until a wake source brings the system into resume path. When a wakeup event occurs, WKUP_M3 starts the power-up sequence by switching on the power domains and finally enabling the clock to MPU. Since the MPU gets powered down as part of the sleep sequence in the resume path ROM code starts executing. The ROM code detects a wakeup from sleep and then jumps to the resume location in OCMC which was populated in one of the IPC registers as part of the suspend sequence. Code is based on work by Vaibhav Bedia. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-23soc: renesas: rcar-rst: Add support for R-Car M3-NJacopo Mondi
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-22treewide/trivial: Remove ';;$' typo noiseIngo Molnar
On lkml suggestions were made to split up such trivial typo fixes into per subsystem patches: --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -439,7 +439,7 @@ setup_uga32(void **uga_handle, unsigned long size, u32 *width, u32 *height) struct efi_uga_draw_protocol *uga = NULL, *first_uga; efi_guid_t uga_proto = EFI_UGA_PROTOCOL_GUID; unsigned long nr_ugas; - u32 *handles = (u32 *)uga_handle;; + u32 *handles = (u32 *)uga_handle; efi_status_t status = EFI_INVALID_PARAMETER; int i; This patch is the result of the following script: $ sed -i 's/;;$/;/g' $(git grep -E ';;$' | grep "\.[ch]:" | grep -vwE 'for|ia64' | cut -d: -f1 | sort | uniq) ... followed by manual review to make sure it's all good. Splitting this up is just crazy talk, let's get over with this and just do it. Reported-by: Pavel Machek <pavel@ucw.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-22soc: imx: gpc: de-register power domains only if initializedStefan Agner
If power domain information are missing in the device tree, no power domains get initialized. However, imx_gpc_remove tries to remove power domains always in the old DT binding case. Only remove power domains when imx_gpc_probe initialized them in first place. Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver") Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-21soc: renesas: rcar-sysc: Add R-Car M3-N supportJacopo Mondi
Add support for R-Car M3-N (R8A77965) power areas. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-21soc: renesas: Identify R-Car M3-NJacopo Mondi
Add support for indentifying R-Car M3-N (R8A77965) SoC. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-19soc: renesas: rcar-sysc: add R8A77980 supportSergei Shtylyov
Add support for R-Car V3H (R8A77980) SoC power areas to the R-Car SYSC driver. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-19soc: renesas: r8a77970-sysc: fix power area parentsSergei Shtylyov
According to the figure 9.2(b) of the R-Car Series, 3rd Generation User’s Manual: Hardware Rev. 0.80 the A2IRn and A2SCn power areas in R8A77970 have the A3IR area as a parent, thus the SYSC driver has those parents wrong... Fixes: bab9b2a74fe9 ("soc: renesas: rcar-sysc: add R8A77970 support") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-15soc: renesas: rcar-rst: Enable watchdog as reset trigger for Gen2Fabrizio Castro
This patch allows for platform specific quirks as some of the SoC need further customization for the watchdog to work properly, like for R-Car Gen2 and for RZ/G. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-13soc: samsung: pmu: Populate children syscon nodesKrzysztof Kozlowski
The syscon poweroff and restart nodes logically belong to the Power Management Unit so populate possible children. This also requires providing compatibles for Exynos5410 and Exynos7 so the PMU device and its children will be instantiated for them as well. Just like Exynos5433, these chipsets are not yet supported by the PMU driver. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
2018-02-12meson-gx-socinfo: make local function meson_gx_socinfo_init staticweiyongjun (A)
Fixes the following sparse warnings: drivers/soc/amlogic/meson-gx-socinfo.c:100:12: warning: symbol 'meson_gx_socinfo_init' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>