summaryrefslogtreecommitdiff
path: root/drivers/soc
AgeCommit message (Collapse)Author
2016-06-07fsl/qe: Add QE TDM libZhao Qiang
QE has module to support TDM, some other protocols supported by QE are based on TDM. add a qe-tdm lib, this lib provides functions to the protocols using TDM to configurate QE-TDM. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07fsl/qe: setup clock source for TDM modeZhao Qiang
Add tdm clock configuration in both qe clock system and ucc fast controller. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07fsl/qe: add rx_sync and tx_sync for TDM modeZhao Qiang
Rx_sync and tx_sync are used by QE-TDM mode, add them to struct ucc_fast_info. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-19soc: mtk-pmic-wrap: avoid integer overflow warningArnd Bergmann
On ARM64, the mtk-pmic-wrap driver causes a harmless warning: mtk-pmic-wrap.c:1062:16: warning: large integer implicitly truncated to unsigned type [-Woverflow] mtk-pmic-wrap.c:1074:16: warning: large integer implicitly truncated to unsigned type [-Woverflow] mtk-pmic-wrap.c:1086:16: warning: large integer implicitly truncated to unsigned type [-Woverflow] .int_en_all = ~(BIT(31) | BIT(1)), The problem is that the result of the BIT() macro is an 'unsigned long', so taking the bitwise NOT operation of that results in an integer with the upper 32 bits all set and that cannot be assigned to a 'u32' variable without loss of information. This is harmless because we were never interested in the upper bits here anyway, so we can shut up the warning by adding a simple cast to 'u32'. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-05-18Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, these contain various things that touch the drivers/ directory but got merged through arm-soc for practical reasons. For the most part, this is now related to power management controllers, which have not yet been abstracted into a separate subsystem, and typically require some code in drivers/soc or arch/arm to control the power domains. Another large chunk here is a rework of the NVIDIA Tegra USB3.0 support, which was surprisingly tricky and took a long time to get done. Finally, reset controller handling as always gets merged through here as well" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) arm-ccn: Enable building as module soc/tegra: pmc: Add generic PM domain support usb: xhci: tegra: Add Tegra210 support usb: xhci: Add NVIDIA Tegra XUSB controller driver dt-bindings: usb: xhci-tegra: Add Tegra210 XUSB controller support dt-bindings: usb: Add NVIDIA Tegra XUSB controller binding PCI: tegra: Support per-lane PHYs dt-bindings: pci: tegra: Update for per-lane PHYs phy: tegra: Add Tegra210 support phy: Add Tegra XUSB pad controller support dt-bindings: phy: tegra-xusb-padctl: Add Tegra210 support dt-bindings: phy: Add NVIDIA Tegra XUSB pad controller binding phy: core: Allow children node to be overridden clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs drivers: firmware: psci: make two helper functions inline soc: renesas: rcar-sysc: Add support for R-Car H3 power areas soc: renesas: rcar-sysc: Add support for R-Car E2 power areas soc: renesas: rcar-sysc: Add support for R-Car M2-N power areas soc: renesas: rcar-sysc: Add support for R-Car M2-W power areas soc: renesas: rcar-sysc: Add support for R-Car H2 power areas ...
2016-05-18Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "These are all the updates to device tree files for 32-bit platforms, which as usual makes up the bulk of the ARM SoC changes: 462 non-merge changesets, 450 files changed, 23340 insertions, 5216 deletions. The three platforms that are added with the "soc" branch are here as well, and we add some related machine files: - For Aspeed AST2400/AST2500, we get the evaluation platform and the Tyan Palmetto POWER8 mainboard that uses the AST2400 BMC - For Oxnas 810SE, the Western Digital "My Book World Edition" is added as the only platform at the moment. - For ARM MPS2, the AN385 (Cortex-M3) and AN399 (Cortex-M7) are supported On the ARM Realview development platform, we now support all machines with device tree, previously only the board files were supported, which in turn will likely be removed soon. Qualcomm IPQ4019 is the second generation ARM based "Internet Processor", following the IPQ806x that is used in many high-end WiFi routers. This one integrates two ath10k wifi radios that were previously on separate chips. Other boards that got added for existing chips are: Ti OMAP family: - Amazon Kindle Fire, first generation, tablet and ebook reader - OnRISC Baltos iR 2110 and 3220 embedded industrial PCs - TI AM5728 IDK, TI AM3359 ICE-V2, and TI DRA722 Rev C EVM development systems Samsung EXYNOS platform: - Samsung ARTIK5 evaluation board, see https://www.artik.io/modules/overview/artik-5/ NXP i.MX platforms: - Ka-Ro electronics TX6S-8034, TX6S-8035, TX6U-8033, TX6U-81xx, TX6Q-1036, TX6Q-1110/-1130, TXUL-0010 and TXUL-0011 industrial SoM modules - Embest MarS Board i.MX6Dual DIY platform - Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX and SoloX Nitrogen6sx embedded boards - Technexion Pico i.MX6UL compute module - ZII VF610 Development Board Marvell embedded (mvebu, orion, kirkwood) platforms: - Linksys Viper (E4200v2 / EA4500) WiFi router - Buffalo Kurobox Pro NAS Qualcomm Snapdragon: - Arrow DragonBoard 600c (96boards) with APQ8064 Snapdragon 600 Rockchips platform: - mqmaker MiQi single-board computer Altera SoCFPGA: - samtec VIN|ING 1000 vehicle communication interface Allwinner Sunxi platforms: - Dserve DSRV9703C tablet - Difrnce DIT4350 tablet - Colorfly E708 Q1 tablet - Polaroid MID2809PXE04 tablet - Olimex A20 OLinuXino LIME2 single board computer - Xunlong Orange Pi 2, Orange Pi One, and Orange Pi PC single board computers Across many platforms, bug fixes went in to address warnings that dtc now emits with 'make dtbs W=1'. Further changes for device enablement went into Ti OMAP, bcm283x (Raspberry Pi), bcm47xx (wifi router), Ti Davinci, Samsung EXYNOS, Marvell mvebu/kirkwood/orion, NXP i.MX/Vybrid NXP LPC18xx, NXP LPC32xx, Renesas shmobile/r-mobile/r-car, Rockchips rk3xxx, ST Ux500, ST STi, Atmel AT91/SAMA5, Altera SoCFPGA, Allwinner Sunxi, Sigma Designs Tango, NVIDIA Tegra, Socionext Uniphier and ARM Versatile Express" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (458 commits) ARM: dts: tango4: Import watchdog node ARM: dts: tango4: Update cpus node for cpufreq ARM: dts: tango4: Update DT to match clk driver ARM: dts: tango4: Initial thermal support arm/dst: Add Aspeed ast2500 device tree arm/dts: Add Aspeed ast2400 device tree ARM: sun7i: dt: Add pll3 and pll7 clocks ARM: dts: sunxi: Add a olinuxino-lime2-emmc ARM: dts: at91: sama5d4: add trng node ARM: dts: at91: sama5d3: add trng node ARM: dts: at91: sama5d2: add trng node ARM: dts: at91: at91sam9g45 family: reduce the trng register map size ARM: sun4i: dt: Add pll3 and pll7 clocks ARM: sun5i: chip: Enable the TV Encoder ARM: sun5i: r8: Add display blocks to the DTSI ARM: sun5i: a13: Add display and TCON clocks ARM: dts: ux500: configure the accelerometers open drain ARM: mx5: dts: Enable USB OTG on M53EVK ARM: dts: imx6ul-14x14-evk: Add audio support ARM: dts: imx6qdl: Remove unneeded unit-addresses ...
2016-05-18Merge tag 'armsoc-cleanups-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups and fixes from Arnd Bergmann: "Traditionally we've had two separate branches for cleanups and non-critical bug fixes, but both of these got smaller with each release and the differences are rather unclear now, so it seems more appropriate to have a combined branch. The most notable change is for OMAP, which gets a small rework to simplify handling of the AUXDATA mechanism used on machines that are not completely DT based yet, along with other work that is used as preparation for dropping the legacy board files" * tag 'armsoc-cleanups-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: exynos: Add interrupt line to MAX8997 PMIC on exynos4210-trats ARM: dts: exynos: Fix regulator name to avoid forbidden character on exynos4210-trats ARM: dts: exynos: Add MFC memory banks for Peach boards ARM: OMAP2+: n900 needs MMC slot names for legacy user space ARM: OMAP2+: Add more functions to pwm pdata for ir-rx51 ARM: debug: remove extraneous DEBUG_HI3716_UART option ARM: OMAP2+: Simplify auxdata by using the generic match of/platform: Allow secondary compatible match in of_dev_lookup ARM: davinci: use IRQCHIP_DECLARE for cp_intc ARM: davinci: remove unused DA8XX_NUM_UARTS ARM: davinci: simplify call to of populate ARM: DaVinci USB: removed deprecated properties from MUSB config ARM: rockchip: Fix use of plain integer as NULL pointer ARM: realview: hide unused 'pmu_device' object soc: versatile: dynamically detect RealView HBI numbers
2016-05-17Merge tag 'gpio-v4.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for kernel cycle v4.7: Core infrastructural changes: - Support for natively single-ended GPIO driver stages. This means that if the hardware has registers to configure open drain or open source configuration, we use that rather than (as we did before) try to emulate it by switching the line to an input to get high impedance. This is also documented throughly in Documentation/gpio/driver.txt for those of you who did not understand one word of what I just wrote. - Start to do away with the unnecessarily complex and unitelligible ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB, another evolutional artifact from the time when the GPIO subsystem was unmaintained. Archs can now just select GPIOLIB and be done with it, cleanups to arches will trickle in for the next kernel. Some minor archs ACKed the changes immediately so these are included in this pull request. - Advancing the use of the data pointer inside the GPIO device for storing driver data by switching the PowerPC, Super-H Unicore and a few other subarches or subsystem drivers in ALSA SoC, Input, serial, SSB, staging etc to use it. - The initialization now reads the input/output state of the GPIO lines, so that each GPIO descriptor knows - if this callback is implemented - whether the line is input or output. This also reflects nicely in userspace "lsgpio". - It is now possible to name GPIO producer names, line names, from the device tree. (Platform data has been supported for a while). I bet we will get a similar mechanism for ACPI one of those days. This makes is possible to get sensible producer names for e.g. GPIO rails in "lsgpio" in userspace. New drivers: - New driver for the Loongson1. - The XLP driver now supports Broadcom Vulcan ARM64. - The IT87 driver now supports IT8620 and IT8628. - The PCA953X driver now supports Galileo Gen2. Driver improvements: - MCP23S08 was switched to use the gpiolib irqchip helpers and now also suppors level-triggered interrupts. - 74x164 and RCAR now supports the .set_multiple() callback - AMDPT was converted to use generic GPIO. - TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994 support the new single ended callback for open drain and in some cases open source. - Implement the .get_direction() callback for a few more drivers like PL061, Xgene. Cleanups: - Paul Gortmaker combed through the drivers and de-modularized those who are not really modules. - Move the GPIO poweroff DT bindings to the power subdir where they belong. - Rename gpio-generic.c to gpio-mmio.c, which is much more to the point. That's what it is handling, nothing more, nothing less" * tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (126 commits) MIPS: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB gpio: zevio: make it explicitly non-modular gpio: timberdale: make it explicitly non-modular gpio: stmpe: make it explicitly non-modular gpio: sodaville: make it explicitly non-modular pinctrl: sh-pfc: Let gpio_chip.to_irq() return zero on error gpio: dwapb: Add ACPI device ID for DWAPB GPIO controller on X-Gene platforms gpio: dt-bindings: add wd,mbl-gpio bindings gpio: of: make it possible to name GPIO lines gpio: make gpiod_to_irq() return negative for NO_IRQ gpio: xgene: implement .get_direction() gpio: xgene: Enable ACPI support for X-Gene GFC GPIO driver gpio: tegra: Implement gpio_get_direction callback gpio: set up initial state from .get_direction() gpio: rename gpio-generic.c into gpio-mmio.c gpio: generic: fix GPIO_GENERIC_PLATFORM is set to module case gpio: dwapb: add gpio-signaled acpi event support gpio: dwapb: convert device node to fwnode gpio: dwapb: remove name from dwapb_port_property gpio/qoriq: select IRQ_DOMAIN ...
2016-05-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Support SPI based w5100 devices, from Akinobu Mita. 2) Partial Segmentation Offload, from Alexander Duyck. 3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE. 4) Allow cls_flower stats offload, from Amir Vadai. 5) Implement bpf blinding, from Daniel Borkmann. 6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is actually using FASYNC these atomics are superfluous. From Eric Dumazet. 7) Run TCP more preemptibly, also from Eric Dumazet. 8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e driver, from Gal Pressman. 9) Allow creating ppp devices via rtnetlink, from Guillaume Nault. 10) Improve BPF usage documentation, from Jesper Dangaard Brouer. 11) Support tunneling offloads in qed, from Manish Chopra. 12) aRFS offloading in mlx5e, from Maor Gottlieb. 13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo Leitner. 14) Add MSG_EOR support to TCP, this allows controlling packet coalescing on application record boundaries for more accurate socket timestamp sampling. From Martin KaFai Lau. 15) Fix alignment of 64-bit netlink attributes across the board, from Nicolas Dichtel. 16) Per-vlan stats in bridging, from Nikolay Aleksandrov. 17) Several conversions of drivers to ethtool ksettings, from Philippe Reynes. 18) Checksum neutral ILA in ipv6, from Tom Herbert. 19) Factorize all of the various marvell dsa drivers into one, from Vivien Didelot 20) Add VF support to qed driver, from Yuval Mintz" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits) Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m" Revert "phy dp83867: Make rgmii parameters optional" r8169: default to 64-bit DMA on recent PCIe chips phy dp83867: Make rgmii parameters optional phy dp83867: Fix compilation with CONFIG_OF_MDIO=m bpf: arm64: remove callee-save registers use for tmp registers asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions switchdev: pass pointer to fib_info instead of copy net_sched: close another race condition in tcf_mirred_release() tipc: fix nametable publication field in nl compat drivers: net: Don't print unpopulated net_device name qed: add support for dcbx. ravb: Add missing free_irq() calls to ravb_close() qed: Remove a stray tab net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fec-mpc52xx: use phydev from struct net_device bpf, doc: fix typo on bpf_asm descriptions stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fs-enet: use phydev from struct net_device ...
2016-05-16Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: cpuidle: Replace ktime_get() with local_clock() drivers: firmware: psci: use const and __initconst for psci_cpuidle_ops soc: qcom: spm: Use const and __initconst for qcom_cpuidle_ops ARM: cpuidle: constify return value of arm_cpuidle_get_ops() ARM: cpuidle: add const qualifier to cpuidle_ops member in structures intel_idle: add BXT support cpuidle: Indicate when a device has been unregistered
2016-05-13Merge tag 'qcom-soc-for-4.7-2' into net-nextBjorn Andersson
This merges the Qualcomm SOC tree with the net-next, solving the merge conflict in the SMD API between the two. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-05-09Merge tag 'v4.6-next-soc' of https://github.com/mbgg/linux-mediatek into ↵Arnd Bergmann
next/drivers Merge "ARM: mediatek soc updates for v4.7" from Matthias Brugger: - re-organize pmic wrapper code for easier and cleaner addiont of new SoCs and pmic wrappers - add support for pmic wrapper mt6323 - add support for SoC mt2701 - enable gpt6 arch timer on mt7623 * tag 'v4.6-next-soc' of https://github.com/mbgg/linux-mediatek: ARM: mediatek: enable gpt6 on boot up to make arch timer work on mt7623 soc: mediatek: PMIC wrap: add MT2701/7623 support soc: mediatek: PMIC wrap: add mt6323 slave support soc: mediatek: PMIC wrap: add a slave specific struct soc: mediatek: PMIC wrap: remove pwrap_is_mt8135() and pwrap_is_mt8173() soc: mediatek: PMIC wrap: move wdt_src into the pmic_wrapper_type struct soc: mediatek: PMIC wrap: SPI_WRITE needs a different bitmask for MT2701/7623 soc: mediatek: PMIC wrap: WRAP_INT_EN needs a different bitmask for MT2701/7623 soc: mediatek: PMIC wrap: split SoC specific init into callback soc: mediatek: PMIC wrap: add wrapper callbacks for init_reg_clock soc: mediatek: PMIC wrap: don't duplicate the wrapper data
2016-05-09Merge tag 'tegra-for-4.7-genpd' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers Merge "soc/tegra: Add generic PM domain support" from Thierry Reding: Implements generic PM domain support on top of the existing Tegra power- gate API. Drivers are thus allowed to move away from the Tegra-specific API and towards using generic power domains directly. * tag 'tegra-for-4.7-genpd' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: pmc: Add generic PM domain support dt-bindings: Add power domain info for NVIDIA PMC
2016-05-09Merge tag 'v4.7-rockchip-drivers-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers Merge "Rockchip driver updates for v4.7 - part2" from Heiko Stübner: Ability to save and restore the power-domain quality of service settings that get lost and reset on power-domain power cycles. * tag 'v4.7-rockchip-drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: soc: rockchip: power-domain: support qos save and restore dt-bindings: modify document of Rockchip power domains
2016-04-29soc/tegra: pmc: Add generic PM domain supportJon Hunter
Adds generic PM domain support to the PMC driver where the PM domains are populated from device-tree and the PM domain consumer devices are bound to their relevant PM domains via device-tree as well. Update the tegra_powergate_sequence_power_up() API so that internally it calls the same tegra_powergate_xxx functions that are used by the Tegra generic PM domain code for consistency. To ensure that the Tegra power domains (a.k.a. powergates) cannot be controlled via both the legacy tegra_powergate_xxx functions as well as the generic PM domain framework, add a bit map for available powergates that can be controlled via the legacy powergate functions. Move the majority of the tegra_powergate_remove_clamping() function to a sub-function, so that this can be used by both the legacy and generic power domain code. This is based upon work by Thierry Reding <treding@nvidia.com> and Vince Hsu <vinceh@nvidia.com>. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-26Merge tag 'renesas-rcar-sysc2-for-v4.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers Merge "Second Round of Renesas ARM Based SoC R-Car SYSC Updates for v4.7" from Simon Horman: Introduce a DT-based driver for the R-Car System Controller, as found on Renesas R-Car H1, R-Car Gen2, and R-Car Gen3 SoCs. * tag 'renesas-rcar-sysc2-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (30 commits) soc: renesas: rcar-sysc: Add support for R-Car H3 power areas soc: renesas: rcar-sysc: Add support for R-Car E2 power areas soc: renesas: rcar-sysc: Add support for R-Car M2-N power areas soc: renesas: rcar-sysc: Add support for R-Car M2-W power areas soc: renesas: rcar-sysc: Add support for R-Car H2 power areas soc: renesas: rcar-sysc: Add support for R-Car H1 power areas soc: renesas: rcar-sysc: Enable Clock Domain for I/O devices soc: renesas: rcar-sysc: Make rcar_sysc_power_is_off() static soc: renesas: rcar-sysc: Add DT support for SYSC PM domains soc: renesas: rcar-sysc: Improve rcar_sysc_power() debug info soc: renesas: Move pm-rcar to drivers/soc/renesas/rcar-sysc clk: renesas: cpg-mssr: Export cpg_mssr_{at,de}tach_dev() clk: renesas: mstp: Provide dummy attach/detach_dev callbacks clk: renesas: Provide Kconfig symbols for CPG/MSSR and CPG/MSTP support soc: renesas: Add r8a7795 SYSC PM Domain Binding Definitions soc: renesas: Add r8a7794 SYSC PM Domain Binding Definitions soc: renesas: Add r8a7793 SYSC PM Domain Binding Definitions soc: renesas: Add r8a7791 SYSC PM Domain Binding Definitions soc: renesas: Add r8a7790 SYSC PM Domain Binding Definitions soc: renesas: Add r8a7779 SYSC PM Domain Binding Definitions ...
2016-04-26soc: renesas: rcar-sysc: Add support for R-Car H3 power areasGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-26soc: renesas: rcar-sysc: Add support for R-Car E2 power areasGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-26soc: renesas: rcar-sysc: Add support for R-Car M2-N power areasGeert Uytterhoeven
R-Car M2-N is identical to R-Car M2-W w.r.t. power domains, so reuse the definitions from the latter. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-26soc: renesas: rcar-sysc: Add support for R-Car M2-W power areasGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-26soc: renesas: rcar-sysc: Add support for R-Car H2 power areasGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-26soc: renesas: rcar-sysc: Add support for R-Car H1 power areasGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-26soc: renesas: rcar-sysc: Enable Clock Domain for I/O devicesGeert Uytterhoeven
On R-Car H3, some power areas (e.g. A3VP) contain I/O devices, which are also part of the CPG/MSSR Clock Domain. On all R-Car SoCs, devices in the "always-on" PM Domain are part of the Clock Domain served by the CPG/MSSR or CPG/MSTP driver. Hook up the CPG/MSTP or CPG/MSSR Clock Domain attach/detach callbacks to enable power management using module clocks. Which callback to hook up depends on the presence of device nodes compatible with "renesas,cpg-mstp-clocks". This clears the path for a future migration from the CPG/MSTP to the CPG/MSSR driver on R-Car H1 and Gen2. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-26soc: brcmstb: Unmap sun_top_ctrl_base on errorsFlorian Fainelli
Do not leak a ioremap()'d cookie around, unmaping it in case of errors Fixes: cef4bafcea2c ("soc: brcmstb: add SoC driver to brcmstb") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-04-26soc: brcmstb: select SOC_BUSArnd Bergmann
The newly added code for the SoC bus fails to link if the bus is not built: drivers/soc/built-in.o: In function `brcmstb_soc_device_init': :(.init.text+0x110): undefined reference to `soc_device_register' This adds a 'select' statement to avoid the error. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: cef4bafcea2c ("soc: brcmstb: add SoC driver to brcmstb") Acked-by: Florian Fainelli <f.fainelli@gmail.com>
2016-04-25Merge tag 'qcom-soc-for-4.7-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers Merge "Qualcomm ARM Based SoC Updates for v4.7 part 2" from Andy Gross: * Change SMD callback parameters * Use writecombine mapping for SMEM * tag 'qcom-soc-for-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: soc: qcom: smd: Make callback pass channel reference soc: qcom: smem: Use write-combine remap for SMEM
2016-04-25Merge tag 'arm-soc/for-4.7/drivers' of http://github.com/Broadcom/stblinux ↵Arnd Bergmann
into next/drivers Merge "Broadcom ARM-based SoCs drivers changes" from Florian Fainelli: - Justin adds a soc_dev driver to properly report to user-space the Broadcom STB SoC family, product and revision - Florian reworks how the brcmstb_gisb driver dependency is done to enable it on Broadcom STB MIPS-based SoCs and remove a select in arch/arm/mach-bcm/Kconfig * tag 'arm-soc/for-4.7/drivers' of http://github.com/Broadcom/stblinux: bus: brcmstb_gisb: Rework dependencies soc: brcmstb: add SoC driver to brcmstb
2016-04-25Merge tag 'tegra-for-4.7-soc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers Merge "soc/tegra: Changes for v4.7-rc1" from Thierry Reding: This contains a bunch of preparatory patches to the PMC driver which are a prerequisite to moving the driver to generic power domains. * tag 'tegra-for-4.7-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: Update NVIDIA PMC for Tegra soc/tegra: pmc: Wait for powergate state to change soc/tegra: pmc: Ensure GPU partition can be toggled on/off by PMC soc/tegra: pmc: Remove additional check for a valid partition soc/tegra: pmc: Fix verification of valid partitions soc/tegra: pmc: Fix testing of powergate state soc/tegra: pmc: Change powergate and rail IDs to be an unsigned type soc/tegra: pmc: Protect public functions from potential race conditions soc/tegra: pmc: Restore base address on probe failure soc/tegra: pmc: Remove non-existing L2 partition for Tegra124 soc/tegra: pmc: Remove non-existing power partitions for Tegra210 soc/tegra: pmc: Remove debugfs entry on probe failure soc/tegra: pmc: Fix sparse warning for tegra_pmc_init_tsense_reset() soc/tegra: pmc: Add missing structure members to kernel-doc
2016-04-22soc: renesas: rcar-sysc: Make rcar_sysc_power_is_off() staticGeert Uytterhoeven
As of commit b12ff41658171f53 ("ARM: shmobile: r8a7779: Remove legacy PM Domain remainings"), rcar_sysc_power_is_off() is no longer used from SoC-specific code. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-22soc: renesas: rcar-sysc: Add DT support for SYSC PM domainsGeert Uytterhoeven
Populate the SYSC PM domains from DT, based on the presence of a device node for the System Controller. The actual power area hiearchy, and features of specific areas are obtained from tables in the C code. The SYSCIER and SYSCIMR register values are derived from the power areas present, which will help to get rid of the hardcoded values in R-Car H1 and R-Car Gen2 platform code later. Initialization is done from an early_initcall(), to make sure the PM Domains are initialized before secondary CPU bringup. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-22soc: renesas: rcar-sysc: Improve rcar_sysc_power() debug infoGeert Uytterhoeven
Print requested power domain state. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-22soc: renesas: Move pm-rcar to drivers/soc/renesas/rcar-syscGeert Uytterhoeven
Move the pm-rcar driver from arch/arm/mach-shmobile/ to drivers/soc/renesas/, and its header file to include/linux/soc/renesas/, so it can be shared between arm32 (R-Car H1 and Gen2) and arm64 (R-Car Gen3). Rename it to rcar-sysc as it's really a driver for the R-Car System Controller (SYSC). Kill the intermediate PM_RCAR config symbol, as it's not user configurable anymore, and to prepare for SoC-specific make rules. Add the missing #include <linux/types.h> to rcar-sysc.h, which was exposed by different include order. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-21soc: rockchip: power-domain: support qos save and restoreElaine Zhang
support qos save and restore when power domain on/off. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-04-20soc: mediatek: PMIC wrap: add MT2701/7623 supportJohn Crispin
Add the registers, callbacks and data structures required to make the wrapper work on MT2701 and MT7623. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2016-04-20soc: mediatek: PMIC wrap: add mt6323 slave supportJohn Crispin
Add support for MT6323 slaves. This PMIC can be found on MT2701 and MT7623 EVB. The only function that we need to touch is pwrap_init_cipher(). Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2016-04-20soc: mediatek: PMIC wrap: add a slave specific structJohn Crispin
This patch adds a new struct pwrap_slv_type that we use to store the slave specific data. The patch adds 2 new helper functions to access the dew registers. The slave type is looked up via the wrappers child node. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2016-04-20soc: mediatek: PMIC wrap: remove pwrap_is_mt8135() and pwrap_is_mt8173()John Crispin
With more SoCs being added the list of helper functions like these would grow. To mitigate this problem we remove the existing helpers and change the code to test against the pmic type stored inside the pmic specific datastructure that our context structure points at. There is one usage of pwrap_is_mt8135() that is ambiguous as the test should not be dependent on mt8135, but rather on the existence of a bridge. Add a new element to pmic_wrapper_type to indicate if a bridge is present and use this where appropriate. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2016-04-20soc: mediatek: PMIC wrap: move wdt_src into the pmic_wrapper_type structJohn Crispin
Different SoCs will use different bitmask for the wdt_src. This patch defines the bitmask in the pmic_wrapper_type struct. This allows us to support new SoCs with a different bitmask to the one currently used. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2016-04-20soc: mediatek: PMIC wrap: SPI_WRITE needs a different bitmask for MT2701/7623John Crispin
Different SoCs will use different bitmask for the SPI_WRITE command. This patch defines the bitmask in the pmic_wrapper_type struct. This allows us to support new SoCs with a different bitmask to the one currently used. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2016-04-20soc: mediatek: PMIC wrap: WRAP_INT_EN needs a different bitmask for MT2701/7623John Crispin
MT2701 and MT7623 use a different bitmask for PWRAP_INT_EN. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2016-04-20soc: mediatek: PMIC wrap: split SoC specific init into callbackJohn Crispin
This patch moves the SoC specific wrapper init code into separate callback to avoid pwrap_init() getting too large. This is done by adding a new element called init_special to pmic_wrapper_type. Each currently supported SoC gets its own version of the callback and we copy the code that was previously inside pwrap_init() to these new callbacks. Finally we point the 2 instances of pmic_wrapper_type at the 2 new functions. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2016-04-20soc: mediatek: PMIC wrap: add wrapper callbacks for init_reg_clockJohn Crispin
Split init_reg_clock up into SoC specific callbacks. The patch also reorders the code to avoid the need for callback function prototypes. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2016-04-20soc: mediatek: PMIC wrap: don't duplicate the wrapper dataJohn Crispin
As we add support for more devices struct pmic_wrapper_type will grow and we do not really want to start duplicating all the elements in struct pmic_wrapper. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2016-04-20soc: qcom: spm: Use const and __initconst for qcom_cpuidle_opsJisheng Zhang
The qcom_cpuidle_ops structures is not over-written, so add "const" qualifier and replace __initdata with __initconst. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Andy Gross <andy.gross@linaro.org>
2016-04-19soc: qcom: smd: Make callback pass channel referenceBjorn Andersson
By passing the smd channel reference to the callback, rather than the smd device, we can open additional smd channels from sub-devices of smd devices. Also updates the two smd clients today found in mainline. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-04-19soc: qcom: smem: Use write-combine remap for SMEMBjorn Andersson
Mapping the SMEM region as write combine makes the contiguous writes in SMD perform better and also allows us to do unaligned read and writes on ARM64. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-04-18soc: brcmstb: add SoC driver to brcmstbJustin Chen
Value of soc_dev_attributes: * family = chip family id * soc_id = product id * revision = product revision Signed-off-by: Justin Chen <justin.chen@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-04-13Merge tag 'v4.7-rockchip-drivers-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers Rockchip soc-specific driver changes containing support for the rk3399 powerdomains and necessary infrastructure changes to accomodate them - like supporting nested powerdomains here. * tag 'v4.7-rockchip-drivers-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: soc: rockchip: power-domain: check the existing of regmap soc: rockchip: power-domain: Modify power domain driver for rk3399 dt-bindings: add binding for rk3399 power domains dt-bindings: add power-domain header for RK3399 SoCs soc: rockchip: power-domain: add support for sub-power domains soc: rockchip: power-domain: allow domains only handling idle requests soc: rockchip: power-domain: make idle handling optional Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-13Revert "soc: mediatek: SCPSYS: Fix double enabling of regulators"James Liao
This reverts commit cc8ed76938b5cf6a54ab3d60edabaf808dc960d1 ("soc: mediatek: SCPSYS: Fix double enabling of regulators") [1]. This patch fixes mt8173-evb failing boot issue. With commit [1], genpd state will not sync to real power domain state. So some resources such as clocks and regulators may stay in a wrong state. There is no regulator double enabling issue on mainline kernel, so we can refert commit [1] safely. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2016-04-12ARM: tegra: Remove redundant ARM_L1_CACHE_SHIFT_6 selectMasahiro Yamada
These two are both ARMv7 SoCs. They need not explicitly select ARM_L1_CACHE_SHIFT_6 because it is enabled along with CPU_V7. Refer to commit a092f2b15399 ("ARM: 7291/1: cache: assume 64-byte L1 cachelines for ARMv7 CPUs"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Thierry Reding <treding@nvidia.com>