summaryrefslogtreecommitdiff
path: root/drivers/soc
AgeCommit message (Collapse)Author
2015-07-02Merge tag 'module-builtin_driver-v4.1-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull module_platform_driver replacement from Paul Gortmaker: "Replace module_platform_driver with builtin_platform driver in non modules. We see an increasing number of non-modular drivers using modular_driver() type register functions. There are several downsides to letting this continue unchecked: - The code can appear modular to a reader of the code, and they won't know if the code really is modular without checking the Makefile and Kconfig to see if compilation is governed by a bool or tristate. - Coders of drivers may be tempted to code up an __exit function that is never used, just in order to satisfy the required three args of the modular registration function. - Non-modular code ends up including the <module.h> which increases CPP overhead that they don't need. - It hinders us from performing better separation of the module init code and the generic init code. So here we introduce similar macros for builtin drivers. Then we convert builtin drivers (controlled by a bool Kconfig) by making the following type of mapping: module_platform_driver() ---> builtin_platform_driver() module_platform_driver_probe() ---> builtin_platform_driver_probe(). The set of drivers that are converted here are just the ones that showed up as relying on an implicit include of <module.h> during a pending header cleanup. So we convert them here vs adding an include of <module.h> to non-modular code to avoid compile fails. Additonal conversions can be done asynchronously at any time. Once again, an unused module_exit function that is removed here appears in the diffstat as an outlier wrt all the other changes" * tag 'module-builtin_driver-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: drivers/clk: convert sunxi/clk-mod0.c to use builtin_platform_driver drivers/power: Convert non-modular syscon-reboot to use builtin_platform_driver drivers/soc: Convert non-modular soc-realview to use builtin_platform_driver drivers/soc: Convert non-modular tegra/pmc to use builtin_platform_driver drivers/cpufreq: Convert non-modular s5pv210-cpufreq.c to use builtin_platform_driver drivers/cpuidle: Convert non-modular drivers to use builtin_platform_driver drivers/platform: Convert non-modular pdev_bus to use builtin_platform_driver platform_device: better support builtin boilerplate avoidance
2015-06-26Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Kevin Hilman: "Some of these are for drivers/soc, where we're now putting SoC-specific drivers these days. Some are for other driver subsystems where we have received acks from the appropriate maintainers. Some highlights: - simple-mfd: document DT bindings and misc updates - migrate mach-berlin to simple-mfd for clock, pinctrl and reset - memory: support for Tegra132 SoC - memory: introduce tegra EMC driver for scaling memory frequency - misc. updates for ARM CCI and CCN busses" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: soc: sunxi: Introduce SoC driver to map SRAMs arm-cci: Add aliases for PMU events arm-cci: Add CCI-500 PMU support arm-cci: Sanitise CCI400 PMU driver specific code arm-cci: Abstract handling for CCI events arm-cci: Abstract out the PMU counter details arm-cci: Cleanup PMU driver code arm-cci: Do not enable CCI-400 PMU by default firmware: qcom: scm: Add HDCP Support ARM: berlin: add an ADC node for the BG2Q ARM: berlin: remove useless chip and system ctrl compatibles clk: berlin: drop direct of_iomap of nodes reg property ARM: berlin: move BG2Q clock node ARM: berlin: move BG2CD clock node ARM: berlin: move BG2 clock node clk: berlin: prepare simple-mfd conversion pinctrl: berlin: drop SoC stub provided regmap ARM: berlin: move pinctrl to simple-mfd nodes pinctrl: berlin: prepare to use regmap provided by syscon reset: berlin: drop arch_initcall initialization ...
2015-06-26Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform support updates from Kevin Hilman: "Our SoC branch usually contains expanded support for new SoCs and other core platform code. Some highlights from this round: - sunxi: SMP support for A23 SoC - socpga: big-endian support - pxa: conversion to common clock framework - bcm: SMP support for BCM63138 - imx: support new I.MX7D SoC - zte: basic support for ZX296702 SoC" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (134 commits) ARM: zx: Add basic defconfig support for ZX296702 ARM: dts: zx: add an initial zx296702 dts and doc clk: zx: add clock support to zx296702 dt-bindings: Add #defines for ZTE ZX296702 clocks ARM: socfpga: fix build error due to secondary_startup MAINTAINERS: ARM64: EXYNOS: Extend entry for ARM64 DTS ARM: ep93xx: simone: support for SPI-based MMC/SD cards MAINTAINERS: update Shawn's email to use kernel.org one ARM: socfpga: support suspend to ram ARM: socfpga: add CPU_METHOD_OF_DECLARE for Arria 10 ARM: socfpga: use CPU_METHOD_OF_DECLARE for socfpga_cyclone5 ARM: EXYNOS: register power domain driver from core_initcall ARM: EXYNOS: use PS_HOLD based poweroff for all supported SoCs ARM: SAMSUNG: Constify platform_device_id ARM: EXYNOS: Constify irq_domain_ops ARM: EXYNOS: add coupled cpuidle support for Exynos3250 ARM: EXYNOS: add exynos_get_boot_addr() helper ARM: EXYNOS: add exynos_set_boot_addr() helper ARM: EXYNOS: make exynos_core_restart() less verbose ARM: EXYNOS: fix exynos_boot_secondary() return value on timeout ...
2015-06-16drivers/soc: Convert non-modular soc-realview to use builtin_platform_driverPaul Gortmaker
This file depends on Kconfig SOC_REALVIEW which is a bool, so we use the appropriate registration function, which avoids us relying on an implicit inclusion of <module.h> which we are doing currently. While this currently works, we really don't want to be including the module.h header in non-modular code, which we'd be forced to do, pending some upcoming code relocation from init.h into module.h. So we fix it now by using the non-modular equivalent. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Axel Lin <axel.lin@ingics.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2015-06-16drivers/soc: Convert non-modular tegra/pmc to use builtin_platform_driverPaul Gortmaker
This file depends on Kconfig ARCH_TEGRA which is a bool, so we use the appropriate registration function, which avoids us relying on an implicit inclusion of <module.h> which we are doing currently. While this currently works, we really don't want to be including the module.h header in non-modular code, which we'd be forced to do, pending some upcoming code relocation from init.h into module.h. So we fix it now by using the non-modular equivalent. Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-tegra@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2015-06-01drivers: soc: sunxi: Introduce SoC driver to map SRAMsMaxime Ripard
The Allwinner SoCs have a handful of SRAM that can be either mapped to be accessible by devices or the CPU. That mapping is controlled by an SRAM controller, and that mapping might not be set by the bootloader, for example if the device wasn't used at all, or if we're using solutions like the U-Boot's Falcon Boot. We could also imagine changing this at runtime for example to change the mapping of these SRAMs to use them for suspend/resume or runtime memory rate change, if that ever happens. These use cases require some API in the kernel to control that mapping, exported through a drivers/soc driver. This driver also implement a debugfs file that shows the SRAM found in the system, the current mapping and the SRAM that have been claimed by some drivers in the kernel. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-29Merge tag 'qcom-soc-for-4.2-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/drivers Merge "Qualcomm ARM Based SoC Updates for v4.2-1" from Kumar Gala: * Added Subsystem Power Manager (SPM) driver * Split out 32-bit specific SCM code * Added HDCP SCM call * tag 'qcom-soc-for-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom: firmware: qcom: scm: Add HDCP Support firmware: qcom: scm: Split out 32-bit specific SCM code ARM: qcom: Add Subsystem Power Manager (SPM) driver
2015-05-29Merge tag 'v4.1-next-soc' of https://github.com/mbgg/linux-mediatek into ↵Arnd Bergmann
next/drivers Merge "ARM: mediatek: soc updates for v4.2" from Matthias Brugger: - pmic wrapper: fix clock handling - pmic wrapper: fix state machine - pmic wrapper: fix compile dependency * tag 'v4.1-next-soc' of https://github.com/mbgg/linux-mediatek: soc: mediatek: Add compile dependency to pmic-wrapper soc: mediatek: PMIC wrap: Fix register state machine handling soc: mediatek: PMIC wrap: Fix clock rate handling
2015-05-27soc: mediatek: Add compile dependency to pmic-wrapperMatthias Brugger
The pmic-wrapper calls the reset controller. If CONFIG_RESET_CONTROLLER is not set, compilation fails with: drivers/soc/mediatek/mtk-pmic-wrap.c: In function ‘pwrap_probe’: drivers/soc/mediatek/mtk-pmic-wrap.c:836:2: error: implicit declaration of function ‘devm_reset_control_get’ [-Werror=implicit-function-declaration] This patch sets the dependency in the Kconfig file. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-05-27soc: mediatek: PMIC wrap: Fix register state machine handlingSascha Hauer
When the PMIC wrapper state machine has read a register it goes into the "wait for valid clear" (vldclr) state. The state machine stays in this state until the VLDCLR bit is written to. We should write this bit after reading a register because the SCPSYS won't let the system go into suspend as long as the state machine waits for valid clear. Since now we never leave the state machine in vldclr state we no longer have to check for this state on pwrap_read/pwrap_write entry and can remove the corresponding code. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-05-27soc: mediatek: PMIC wrap: Fix clock rate handlingSascha Hauer
replace chipselect extension values based on SPI clock with hardcoded SoC specific values. The PMIC wrapper has the ability of extending the chipselects by configurable amounts of time. We configured the values based on the rate of SPI clock, but this is wrong. The delays should be configured based on the internal PMIC clock that latches the values from the SPI bus to the internal PMIC registers. By default this clock is 24MHz. Other clock frequencies are for debugging only and can be removed from the driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-05-04soc/tegra: pmc: move to using a restart handlerDavid Riley
The pmc driver was previously exporting tegra_pmc_restart, which was assigned to machine_desc.init_machine, taking precedence over the restart handlers registered through register_restart_handler(). Signed-off-by: David Riley <davidriley@chromium.org> [tomeu.vizoso@collabora.com: Rebased] Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> [treding@nvidia.com: minor cleanups] Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-04soc/tegra: fuse: Add RAM code reader helperMikko Perttunen
Needed for the EMC and MC drivers to know what timings from the DT to use. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-04soc/tegra: Watch wait_for_completion_timeout() return typeNicholas Mc Guire
The return type of the wait_for_completion_timeout() function is not int but unsigned long. An appropriately named unsigned long is added and the assignment fixed up. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-27ARM: qcom: Add Subsystem Power Manager (SPM) driverLina Iyer
SPM is a hardware block that controls the peripheral logic surrounding the application cores (cpu/l$). When the core executes WFI instruction, the SPM takes over the putting the core in low power state as configured. The wake up for the SPM is an interrupt at the GIC, which then completes the rest of low power mode sequence and brings the core out of low power mode. The SPM has a set of control registers that configure the SPMs individually based on the type of the core and the runtime conditions. SPM is a finite state machine block to which a sequence is provided and it interprets the bytes and executes them in sequence. Each low power mode that the core can enter into is provided to the SPM as a sequence. Configure the SPM to set the core (cpu or L2) into its low power mode, the index of the first command in the sequence is set in the SPM_CTL register. When the core executes ARM wfi instruction, it triggers the SPM state machine to start executing from that index. The SPM state machine waits until the interrupt occurs and starts executing the rest of the sequence until it hits the end of the sequence. The end of the sequence jumps the core out of its low power mode. Add support for an idle driver to set up the SPM to place the core in Standby or Standalone power collapse mode when the core is idle. Based on work by: Mahesh Sivasubramanian <msivasub@codeaurora.org>, Ai Li <ali@codeaurora.org>, Praveen Chidambaram <pchidamb@codeaurora.org> Original tree available at - git://codeaurora.org/quic/la/kernel/msm-3.10.git Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Kevin Hilman <khilman@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Kevin Hilman <khilman@linaro.org> Acked-by: Kumar Gala <galak@codeaurora.org> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2015-04-14Merge tag 'v4.0-next-soc-fix' of https://github.com/mbgg/linux-mediatek into ↵Arnd Bergmann
next/drivers Merge "fix unused variable warning for pmic-wrapper" from Matthias Brugger * tag 'v4.0-next-soc-fix' of https://github.com/mbgg/linux-mediatek: soc/mediatek: Remove unused variables
2015-04-13soc/mediatek: Remove unused variablesThierry Reding
The PMIC wrapper driver adds a couple of variables that are never used. Remove them to avoid build warnings. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-04-03Merge tag 'v4.0-next-soc' of https://github.com/mbgg/linux-mediatek into ↵Olof Johansson
next/drivers Merge "ARM: mediatek: soc updates for v4.1" from Matthias Brugger: - enable the pin controller in Kconfig - Add PMIC wrapper for MT8135 and MT8173 SoCs * tag 'v4.0-next-soc' of https://github.com/mbgg/linux-mediatek: soc: mediatek: Add PMIC wrapper for MT8135 and MT8173 SoCs ARM: mediatek: enable the pin controller Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-30soc: mediatek: Add PMIC wrapper for MT8135 and MT8173 SoCsFlora Fu
This adds support for the PMIC wrapper found on MediaTek MT8135 and MT8173 SoCs. The PMIC wrapper is found on MT6xxx SoCs aswell but these are currently not supported. On MediaTek MT8135, MT8173 and other SoCs the PMIC is connected via SPI. The SPI master interface is not directly visible to the CPU, but only through the PMIC wrapper inside the SoC. The communication between the SoC and the PMIC can optionally be encrypted. Also a non standard Dual IO SPI mode can be used to increase speed. The MT8135 also supports a special feature named "IP Pairing". With IP Pairing the pins of some SoC internal peripherals can be on the PMIC. The signals of these pins are routed over the SPI bus using the pwrap bridge. Because of these optional non SPI conform features the PMIC driver is not implemented as a SPI bus master driver. Signed-off-by: Flora Fu, MediaTek Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-03-11soc: qcom: gsbi: Add support for ADM CRCI muxingAndy Gross
This patch adds automatic configuration for the ADM CRCI muxing required to support DMA operations for GSBI clients. The GSBI mode and instance determine the correct TCSR ADM CRCI MUX value that must be programmed so that the DMA works properly. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2015-02-17Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "These are changes for drivers that are intimately tied to some SoC and for some reason could not get merged through the respective subsystem maintainer tree. This time around, much of this is for at91, with the bulk of it being syscon and udc drivers. Also, there's: - coupled cpuidle support for Samsung Exynos4210 - Renesas 73A0 common-clk work - of/platform changes to tear down DMA mappings on device destruction - a few updates to the TI Keystone knav code" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits) cpuidle: exynos: add coupled cpuidle support for exynos4210 ARM: EXYNOS: apply S5P_CENTRAL_SEQ_OPTION fix only when necessary soc: ti: knav_qmss_queue: change knav_range_setup_acc_irq to static soc: ti: knav_qmss_queue: makefile tweak to build as dynamic module pcmcia: at91_cf: depend on !ARCH_MULTIPLATFORM soc: ti: knav_qmss_queue: export API calls for use by user driver of/platform: teardown DMA mappings on device destruction usb: gadget: at91_udc: Allocate udc instance usb: gadget: at91_udc: Update DT binding documentation usb: gadget: at91_udc: Rework for multi-platform kernel support usb: gadget: at91_udc: Simplify probe and remove functions usb: gadget: at91_udc: Remove non-DT handling code usb: gadget: at91_udc: Document DT clocks and clock-names property usb: gadget: at91_udc: Drop uclk clock usb: gadget: at91_udc: Fix clock names mfd: syscon: Add Atmel SMC binding doc mfd: syscon: Add atmel-smc registers definition mfd: syscon: Add Atmel Matrix bus DT binding documentation mfd: syscon: Add atmel-matrix registers definition clk: shmobile: fix sparse NULL pointer warning ...
2015-01-29soc: ti: knav_qmss_queue: change knav_range_setup_acc_irq to staticMurali Karicheri
knav_range_setup_acc_irq() is used only within the file and should be defined as static. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2015-01-29soc: ti: knav_qmss_queue: makefile tweak to build as dynamic moduleMurali Karicheri
Currently configuring qmss and dma as dynamic module creates three .ko files. knav_qmss_acc.ko and knav_qmss_queue.ko both can't be insmod because of circular dependency. So combine these two into one module by changing the makefile. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2015-01-29soc: ti: knav_qmss_queue: export API calls for use by user driverMurali Karicheri
Currently only few of the API calls are exported. This creates problem when the knav* modules are built as modules and another user module such as netcp_core try to use these API calls and they are also built as module. This patch export these APIs to address the issue. This is needed to support allmodconfig for ARM Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2015-01-23soc: tegra: Add thermal reset (thermtrip) support to PMCMikko Perttunen
This adds a device tree controlled option to enable PMC-based thermal reset in overheating situations. Thermtrip is supported on Tegra30, Tegra114 and Tegra124. The thermal reset only works when the thermal sensors are calibrated, so a soctherm driver is also required. The thermtrip event is triggered by the soctherm block, and all soctherm sensors default to showing a temperature of zero Celsius before they are initialized. Because of this, it is safe to initialize thermtrip and soctherm in any order. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-09soc/tegra: pmc: Add Tegra132 supportThierry Reding
Tegra132 uses the same GPU as Tegra124 and therefore requires the same method to remove clamps. However Tegra132 has a separate chip ID, so in order to avoid having to extend the list of chip IDs for the special case, add a feature flag to the SoC data. Reviewed-by: Paul Walmsley <pwalmsley@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-09soc/tegra: fuse: Add Tegra132 supportThierry Reding
Tegra132 is very similar to Tegra124 from a peripheral point of view and uses the same fuse controller. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-09soc/tegra: fuse: Constify tegra_fuse_info structuresThierry Reding
These structures contain read-only data and are never modified, so they can be const. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-09soc/tegra: pmc: restrict compilation of suspend-related support to ARMPaul Walmsley
Tegra SoCs with 64-bit ARM support don't currently support deep CPU low-power states in mainline Linux. When this support is added in the future, it will probably look rather different from the existing 32-bit ARM support, since the ARM64 maintainers' strong preference is to use PSCI to implement it. So, for the time being, prevent the CPU suspend-related code and data in the Tegra PMC driver from compiling on ARM64. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-12-15Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "Highlights: - AMD KFD driver merge This is the AMD HSA interface for exposing a lowlevel interface for GPGPU use. They have an open source userspace built on top of this interface, and the code looks as good as it was going to get out of tree. - Initial atomic modesetting work The need for an atomic modesetting interface to allow userspace to try and send a complete set of modesetting state to the driver has arisen, and been suffering from neglect this past year. No more, the start of the common code and changes for msm driver to use it are in this tree. Ongoing work to get the userspace ioctl finished and the code clean will probably wait until next kernel. - DisplayID 1.3 and tiled monitor exposed to userspace. Tiled monitor property is now exposed for userspace to make use of. - Rockchip drm driver merged. - imx gpu driver moved out of staging Other stuff: - core: panel - MIPI DSI + new panels. expose suggested x/y properties for virtual GPUs - i915: Initial Skylake (SKL) support gen3/4 reset work start of dri1/ums removal infoframe tracking fixes for lots of things. - nouveau: tegra k1 voltage support GM204 modesetting support GT21x memory reclocking work - radeon: CI dpm fixes GPUVM improvements Initial DPM fan control - rcar-du: HDMI support added removed some support for old boards slave encoder driver for Analog Devices adv7511 - exynos: Exynos4415 SoC support - msm: a4xx gpu support atomic helper conversion - tegra: iommu support universal plane support ganged-mode DSI support - sti: HDMI i2c improvements - vmwgfx: some late fixes. - qxl: use suggested x/y properties" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (969 commits) drm: sti: fix module compilation issue drm/i915: save/restore GMBUS freq across suspend/resume on gen4 drm: sti: correctly cleanup CRTC and planes drm: sti: add HQVDP plane drm: sti: add cursor plane drm: sti: enable auxiliary CRTC drm: sti: fix delay in VTG programming drm: sti: prepare sti_tvout to support auxiliary crtc drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off} drm: sti: fix hdmi avi infoframe drm: sti: remove event lock while disabling vblank drm: sti: simplify gdp code drm: sti: clear all mixer control drm: sti: remove gpio for HDMI hot plug detection drm: sti: allow to change hdmi ddc i2c adapter drm/doc: Document drm_add_modes_noedid() usage drm/i915: Remove '& 0xffff' from the mask given to WA_REG() drm/i915: Invert the mask and val arguments in wa_add() and WA_REG() drm: Zero out DRM object memory upon cleanup drm/i915/bdw: Fix the write setting up the WIZ hashing mode ...
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-09Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "These are changes for drivers that are intimately tied to some SoC and for some reason could not get merged through the respective subsystem maintainer tree. The largest single change here this time around is the Tegra iommu/memory controller driver, which gets updated to the new iommu DT binding. More drivers like this are likely to follow for the following merge window, but we should be able to do those through the iommu maintainer. Other notable changes are: - reset controller drivers from the reset maintainer (socfpga, sti, berlin) - fixes for the keystone navigator driver merged last time - at91 rtc driver changes related to the at91 cleanups - ARM perf driver changes from Will Deacon - updates for the brcmstb_gisb driver" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits) clocksource: arch_timer: Allow the device tree to specify uninitialized timer registers clocksource: arch_timer: Fix code to use physical timers when requested memory: Add NVIDIA Tegra memory controller support bus: brcmstb_gisb: Add register offset tables for older chips bus: brcmstb_gisb: Look up register offsets in a table bus: brcmstb_gisb: Introduce wrapper functions for MMIO accesses bus: brcmstb_gisb: Make the driver buildable on MIPS of: Add NVIDIA Tegra memory controller binding ARM: tegra: Move AHB Kconfig to drivers/amba amba: Add Kconfig file clk: tegra: Implement memory-controller clock serial: samsung: Fix serial config dependencies for exynos7 bus: brcmstb_gisb: resolve section mismatch ARM: common: edma: edma_pm_resume may be unused ARM: common: edma: add suspend resume hook powerpc/iommu: Rename iommu_[un]map_sg functions rtc: at91sam9: add DT bindings documentation rtc: at91sam9: use clk API instead of relying on AT91_SLOW_CLOCK ARM: at91: add clk_lookup entry for RTT devices rtc: at91sam9: rework the Kconfig description ...
2014-12-09Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Arnd Bergmann: "New and updated SoC support, notable changes include: - bcm: brcmstb SMP support initial iproc/cygnus support - exynos: Exynos4415 SoC support PMU and suspend support for Exynos5420 PMU support for Exynos3250 pm related maintenance - imx: new LS1021A SoC support vybrid 610 global timer support - integrator: convert to using multiplatform configuration - mediatek: earlyprintk support for mt8127/mt8135 - meson: meson8 soc and l2 cache controller support - mvebu: Armada 38x CPU hotplug support drop support for prerelease Armada 375 Z1 stepping extended suspend support, now works on Armada 370/XP - omap: hwmod related maintenance prcm cleanup - pxa: initial pxa27x DT handling - rockchip: SMP support for rk3288 add cpu frequency scaling support - shmobile: r8a7740 power domain support various small restart, timer, pci apmu changes - sunxi: Allwinner A80 (sun9i) earlyprintk support - ux500: power domain support Overall, a significant chunk of changes, coming mostly from the usual suspects: omap, shmobile, samsung and mvebu, all of which already contain a lot of platform specific code in arch/arm" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (187 commits) ARM: mvebu: use the cpufreq-dt platform_data for independent clocks soc: integrator: Add terminating entry for integrator_cm_match ARM: mvebu: add SDRAM controller description for Armada XP ARM: mvebu: adjust mbus controller description on Armada 370/XP ARM: mvebu: add suspend/resume DT information for Armada XP GP ARM: mvebu: synchronize secondary CPU clocks on resume ARM: mvebu: make sure MMU is disabled in armada_370_xp_cpu_resume ARM: mvebu: Armada XP GP specific suspend/resume code ARM: mvebu: reserve the first 10 KB of each memory bank for suspend/resume ARM: mvebu: implement suspend/resume support for Armada XP clk: mvebu: add suspend/resume for gatable clocks bus: mvebu-mbus: provide a mechanism to save SDRAM window configuration bus: mvebu-mbus: suspend/resume support clocksource: time-armada-370-xp: add suspend/resume support irqchip: armada-370-xp: Add suspend/resume support ARM: add lolevel debug support for asm9260 ARM: add mach-asm9260 ARM: EXYNOS: use u8 for val[] in struct exynos_pmu_conf power: reset: imx-snvs-poweroff: add power off driver for i.mx6 ARM: imx: temporarily remove CONFIG_SOC_FSL from LS1021A ...
2014-12-04soc: integrator: Add terminating entry for integrator_cm_matchAxel Lin
The of_device_id table is supposed to be zero-terminated. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-02soc/tegra: fuse: export tegra_sku_infoVince Hsu
Some Tegra drivers might be compiled as kernel modules, and they need the fuse information for initialization. One example is the GK20A Nouveau driver. It needs the GPU speedo value to calculate frequency-voltage table. So export the tegra_sku_info. Signed-off-by: Vince Hsu <vinceh@nvidia.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-11-13soc: move SoC driver for the ARM IntegratorLinus Walleij
This creates a new SoC bus driver for the ARM Integrator family core modules to register the SoC bus and provide sysfs info for the core module. We delete the corresponding code from the Integrator machine and select this driver to get a clean result. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-11-03soc: ti: knav_qmss_queue: Use list_for_each_entry_safe to prevent use after freeAxel Lin
list_for_each_entry_safe() is necessary if list objects are deleted from the list while traversing it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2014-10-28soc: versatile: Add terminating entry for realview_soc_of_matchAxel Lin
The of_device_id table is supposed to be zero-terminated. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-10-27soc: ti: knav_qmss_queue: Return proper error if devm_kzalloc failsAxel Lin
Return -ENOMEM if devm_kzalloc fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2014-10-27soc: ti: knav_qmss_queue: Fix unbalanced locking ins knav_pool_create()Axel Lin
Don't call mutex_unlock() in the error patch if the mutex_lock() is not called. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2014-10-27soc: ti: Use list_first_entry_or_null() at appropriate placesAxel Lin
Use list_first_entry_or_null() for first_region() and first_queue_range(). list_first_entry() expects the list is not empty, so first_region() and first_queue_range() never return NULL. Thus use list_first_entry_or_null() instead. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2014-10-20soc: ti: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20soc: tegra: fuse: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20soc: qcom: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-08Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "These are changes for drivers that are intimately tied to some SoC and for some reason could not get merged through the respective subsystem maintainer tree. Most of the new code is for the Keystone Navigator driver, which is new base support that is going to be needed for their hardware accelerated network driver and other units. Most of the commits are for moving old code around from at91 and omap for things that are done in device drivers nowadays. - at91: move reset, poweroff, memory and clocksource code into drivers directories - socfpga: add edac driver (through arm-soc, as requested by Boris) - omap: move omap-intc code to drivers/irqchip - sunxi: added an RTC driver for sun6i - omap: mailbox driver related changes - keystone: support for the "Navigator" component - versatile: new reboot, led and soc drivers" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits) bus: arm-ccn: Fix spurious warning message leds: add device tree bindings for register bit LEDs soc: add driver for the ARM RealView power: reset: driver for the Versatile syscon reboot leds: add a driver for syscon-based LEDs drivers/soc: ti: fix build break with modules MAINTAINERS: Add Keystone Multicore Navigator drivers entry soc: ti: add Keystone Navigator DMA support Documentation: dt: soc: add Keystone Navigator DMA bindings soc: ti: add Keystone Navigator QMSS driver Documentation: dt: soc: add Keystone Navigator QMSS bindings rtc: sunxi: Depend on platforms sun4i/sun7i that actually have the rtc rtc: sun6i: Add sun6i RTC driver irqchip: omap-intc: remove unnecessary comments irqchip: omap-intc: correct maximum number or MIR registers irqchip: omap-intc: enable TURBO idle mode irqchip: omap-intc: enable IP protection irqchip: omap-intc: remove unnecesary of_address_to_resource() call irqchip: omap-intc: comment style cleanup irqchip: omap-intc: minor improvement to omap_irq_pending() ...
2014-09-26soc: add driver for the ARM RealViewLinus Walleij
This adds a SoC driver to be used by the ARM RealView reference boards. We create the "versatile" directory to hold the different ARM reference designs as per the pattern of the clk directory layout. The driver utilze the syscon to get to the register needed. After this we can use sysfs to get at some SoC properties on RealView DT variants like this: > cd /sysbus/soc/devices/soc0 > ls board family machine power subsystem build fpga manufacturer soc_id uevent > cat family Versatile > cat fpga Multi-layer AXI > cat board HBI-0147 > cat build 03 Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Conflicts: drivers/soc/Kconfig drivers/soc/Makefile
2014-09-24soc: ti: add Keystone Navigator DMA supportSantosh Shilimkar
The Keystone Navigator DMA driver sets up the dma channels and flows for the QMSS(Queue Manager SubSystem) who triggers the actual data movements across clients using destination queues. Every client modules like NETCP(Network Coprocessor), SRIO(Serial Rapid IO) and CRYPTO Engines has its own instance of packet dma hardware. QMSS has also an internal packet DMA module which is used as an infrastructure DMA with zero copy. Initially this driver was proposed as DMA engine driver but since the hardware is not typical DMA engine and hence doesn't comply with typical DMA engine driver needs, that approach was naked. Link to that discussion - https://lkml.org/lkml/2014/3/18/340 As aligned, now we pair the Navigator DMA with its companion Navigator QMSS subsystem driver. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Sandeep Nair <sandeep_n@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2014-09-24soc: ti: add Keystone Navigator QMSS driverSandeep Nair
The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of the main hardware sub system which forms the backbone of the Keystone Multi-core Navigator. QMSS consist of queue managers, packed-data structure processors(PDSP), linking RAM, descriptor pools and infrastructure Packet DMA. The Queue Manager is a hardware module that is responsible for accelerating management of the packet queues. Packets are queued/de-queued by writing or reading descriptor address to a particular memory mapped location. The PDSPs perform QMSS related functions like accumulation, QoS, or event management. Linking RAM registers are used to link the descriptors which are stored in descriptor RAM. Descriptor RAM is configurable as internal or external memory. The QMSS driver manages the PDSP setups, linking RAM regions, queue pool management (allocation, push, pop and notify) and descriptor pool management. The specifics on the device tree bindings for QMSS can be found in: Documentation/devicetree/bindings/soc/keystone-navigator-qmss.txt Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Sandeep Nair <sandeep_n@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2014-09-23drivers/soc: qcom: do not disable the iface clock in probeSrinivas Kandagatla
since commit 31964ffebbb9 ("tty: serial: msm: Remove direct access to GSBI")' serial hangs if earlyprintk are enabled. This hang is noticed only when the GSBI driver is probed and all the earlyprintks before gsbi probe are seen on the console. The reason why it hangs is because GSBI driver disables hclk in its probe function without realizing that the serial IP might be in use by a bootconsole. As gsbi driver disables the clock in probe the bootconsole locks up. Turning off hclk's could be dangerous if there are system components like earlyprintk using the hclk. This patch fixes the issue by delegating the clock management to probe and remove functions in gsbi rather than disabling the clock in probe. More detailed problem description can be found here: http://www.spinics.net/lists/linux-arm-msm/msg10589.html Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-17ARM: tegra: Convert PMC to a driverThierry Reding
This commit converts the PMC support code to a platform driver. Because the boot process needs to call into this driver very early, also set up a minimal environment via an early initcall. Signed-off-by: Thierry Reding <treding@nvidia.com>