summaryrefslogtreecommitdiff
path: root/drivers/soc/qcom
AgeCommit message (Collapse)Author
2020-10-24Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms. A bulk of this is smaller fixes or cleanups, but some of the new material this time around is: - Support for Nvidia Tegra234 SoC - Ring accelerator support for TI AM65x - PRUSS driver for TI platforms - Renesas support for R-Car V3U SoC - Reset support for Cortex-M4 processor on i.MX8MQ There are also new socinfo entries for a handful of different SoCs and platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits) drm/mediatek: reduce clear event soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api soc: mediatek: cmdq: add jump function soc: mediatek: cmdq: add write_s_mask value function soc: mediatek: cmdq: add write_s value function soc: mediatek: cmdq: add read_s function soc: mediatek: cmdq: add write_s_mask function soc: mediatek: cmdq: add write_s function soc: mediatek: cmdq: add address shift in jump soc: mediatek: mtk-infracfg: Fix kerneldoc soc: amlogic: pm-domains: use always-on flag reset: sti: reset-syscfg: fix struct description warnings reset: imx7: add the cm4 reset for i.MX8MQ dt-bindings: reset: imx8mq: add m4 reset reset: Fix and extend kerneldoc reset: reset-zynqmp: Added support for Versal platform dt-bindings: reset: Updated binding for Versal reset driver reset: imx7: Support module build soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk soc: fsl: qman: convert to use be32_add_cpu() ...
2020-10-24Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "I had queued up a batch of fixes that got a bit close to the release for sending in before the merge window opened, so I'm including them in the merge window batch instead. Mostly smaller DT tweaks and fixes, the usual mix that we tend to have through the releases" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: iwg20d-q7-common: Fix touch controller probe failure ARM: OMAP2+: Restore MPU power domain if cpu_cluster_pm_enter() fails ARM: dts: am33xx: modify AM33XX_IOPAD for #pinctrl-cells = 2 soc: actions: include header to fix missing prototype arm64: dts: ti: k3-j721e: Rename mux header and update macro names soc: qcom: pdr: Fixup array type of get_domain_list_resp message arm64: dts: qcom: pm660: Fix missing pound sign in interrupt-cells arm64: dts: qcom: kitakami: Temporarily disable SDHCI1 arm64: dts: sdm630: Temporarily disable SMMUs by default arm64: dts: sdm845: Fixup OPP table for all qup devices arm64: dts: allwinner: h5: remove Mali GPU PMU module ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator soc: xilinx: Fix error code in zynqmp_pm_probe()
2020-10-22PM: AVS: qcom-cpr: Move the driver to the qcom specific driversUlf Hansson
The avs drivers are all SoC specific drivers that doesn't share any code. Instead they are located in a directory, mostly to keep similar functionality together. From a maintenance point of view, it makes better sense to collect SoC specific drivers like these, into the SoC specific directories. Therefore, let's move the qcom-cpr driver to the qcom directory. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Niklas Cassel <nks@flawful.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-26Merge tag 'qcom-drivers-fixes-for-5.9' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm driver fixes for v5.9 Fix the array type of the domain_list QMI response in PDR. * tag 'qcom-drivers-fixes-for-5.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: pdr: Fixup array type of get_domain_list_resp message Link: https://lore.kernel.org/r/20200921235241.36463-1-bjorn.andersson@linaro.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-17soc: qcom: llcc: use devm_platform_ioremap_resource_byname()Qilong Zhang
Use the devm_platform_ioremap_resource_byname() helper instead of calling platform_get_resource_byname() and devm_ioremap_resource() separately. Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20200916111517.99670-1-zhangqilong3@huawei.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-15soc: qcom: apr: Fixup the error displayed on lookup failureSibi Sankar
APR client incorrectly prints out "ret" variable on pdr_add_lookup failure, it should be printing the error value returned by the lookup instead. Fixes: 8347356626028 ("soc: qcom: apr: Add avs/audio tracking functionality") Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200915154232.27523-1-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-14soc: qcom: pdr: Fixup array type of get_domain_list_resp messageSibi Sankar
The array type of get_domain_list_resp is incorrectly marked as NO_ARRAY. Due to which the following error was observed when using pdr helpers with the downstream proprietary pd-mapper. Fix this up by marking it as VAR_LEN_ARRAY instead. Err logs: qmi_decode_struct_elem: Fault in decoding: dl(2), db(27), tl(160), i(1), el(1) failed to decode incoming message PDR: tms/servreg get domain list txn wait failed: -14 PDR: service lookup for tms/servreg failed: -14 Tested-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Fixes: fbe639b44a82 ("soc: qcom: Introduce Protection Domain Restart helpers") Reported-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200914145807.1224-1-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-14soc: qcom: socinfo: Add msm8992/4 and apq8094 SoC IDsKonrad Dybcio
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200602201229.322578-1-konradybcio@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-10soc: qcom: rpmh-rsc: Sleep waiting for tcs slots to be freeStephen Boyd
The busy loop in rpmh_rsc_send_data() is written with the assumption that the udelay will be preempted by the tcs_tx_done() irq handler when the TCS slots are all full. This doesn't hold true when the calling thread is an irqthread and the tcs_tx_done() irq is also an irqthread. That's because kernel irqthreads are SCHED_FIFO and thus need to voluntarily give up priority by calling into the scheduler so that other threads can run. I see RCU stalls when I boot with irqthreads on the kernel commandline because the modem remoteproc driver is trying to send an rpmh async message from an irqthread that needs to give up the CPU for the rpmh irqthread to run and clear out tcs slots. rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-....: (1 GPs behind) idle=402/1/0x4000000000000002 softirq=2108/2109 fqs=4920 (t=21016 jiffies g=2933 q=590) Task dump for CPU 0: irq/11-smp2p R running task 0 148 2 0x00000028 Call trace: dump_backtrace+0x0/0x154 show_stack+0x20/0x2c sched_show_task+0xfc/0x108 dump_cpu_task+0x44/0x50 rcu_dump_cpu_stacks+0xa4/0xf8 rcu_sched_clock_irq+0x7dc/0xaa8 update_process_times+0x30/0x54 tick_sched_handle+0x50/0x64 tick_sched_timer+0x4c/0x8c __hrtimer_run_queues+0x21c/0x36c hrtimer_interrupt+0xf0/0x22c arch_timer_handler_phys+0x40/0x50 handle_percpu_devid_irq+0x114/0x25c __handle_domain_irq+0x84/0xc4 gic_handle_irq+0xd0/0x178 el1_irq+0xbc/0x180 save_return_addr+0x18/0x28 return_address+0x54/0x88 preempt_count_sub+0x40/0x88 _raw_spin_unlock_irqrestore+0x4c/0x6c ___ratelimit+0xd0/0x128 rpmh_rsc_send_data+0x24c/0x378 __rpmh_write+0x1b0/0x208 rpmh_write_async+0x90/0xbc rpmhpd_send_corner+0x60/0x8c rpmhpd_aggregate_corner+0x8c/0x124 rpmhpd_set_performance_state+0x8c/0xbc _genpd_set_performance_state+0xdc/0x1b8 dev_pm_genpd_set_performance_state+0xb8/0xf8 q6v5_pds_disable+0x34/0x60 [qcom_q6v5_mss] qcom_msa_handover+0x38/0x44 [qcom_q6v5_mss] q6v5_handover_interrupt+0x24/0x3c [qcom_q6v5] handle_nested_irq+0xd0/0x138 qcom_smp2p_intr+0x188/0x200 irq_thread_fn+0x2c/0x70 irq_thread+0xfc/0x14c kthread+0x11c/0x12c ret_from_fork+0x10/0x18 This busy loop naturally lends itself to using a wait queue so that each thread that tries to send a message will sleep waiting on the waitqueue and only be woken up when a free slot is available. This should make things more predictable too because the scheduler will be able to sleep tasks that are waiting on a free tcs instead of the busy loop we currently have today. Reviewed-by: Maulik Shah <mkshah@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Maulik Shah <mkshah@codeaurora.org> Cc: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20200724211711.810009-1-sboyd@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-10soc: qcom: socinfo: add SC7180 entry to soc_id arrayDouglas Anderson
Add an entry for SC7180 SoC. Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200813080345.1.I85bb28f9ea3fa3bf797ecaf0a5218ced4cfaa6e2@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-10soc: qcom: socinfo: add soc id for IPQ6018Kathiravan T
Add the SoC ID for IPQ6018 variant. Signed-off-by: Kathiravan T <kathirav@codeaurora.org> Link: https://lore.kernel.org/r/1597645830-30409-1-git-send-email-kathirav@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-07Merge branch 'work.misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "No common topic whatsoever in those, sorry" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: define inode flags using bit numbers iov_iter: Move unnecessary inclusion of crypto/hash.h dlmfs: clean up dlmfs_file_{read,write}() a bit
2020-08-07Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "It looks like a smaller batch of clk updates this time around. In the core framework we just have some minor tweaks and a debugfs feature, so not much to see there. The driver updates are fairly well split between AT91 and Qualcomm clk support. Adding those two drivers together equals about 50% of the diffstat. Otherwise, the big amount of work this time was on supporting Broadcom's Raspberry Pi firmware clks. Highlights: Core: - Document clk_hw_round_rate() so it gets some more use - Remove unused __clk_get_flags() - Add a prepare/enable debugfs feature similar to rate setting New Drivers: - Add support for SAMA7G5 SoC clks - Enable CPU clks on Qualcomm IPQ6018 SoCs - Enable CPU clks on Qualcomm MSM8996 SoCs - GPU clk support for Qualcomm SM8150 and SM8250 SoCs - Audio clks on Qualcomm SC7180 SoCs - Microchip Sparx5 DPLL clk - Add support for the new Renesas RZ/G2H (R8A774E1) SoC Updates: - Make defines for bcm63xx-gate clks to use in DT - Support BCM2711 SoC firmware clks - Add HDMI clks for BCM2711 SoCs - Add RTC related clks on Ingenic SoCs - Support USB PHY clks on Ingenic SoCs - Support gate clks on BCM6318 SoCs - RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs - Use poll_timeout functions in Rockchip clk driver - Support Rockchip rk3288w SoC variant - Mark mac_lbtest critical on Rockchip rk3188 - Add CAAM clock support for i.MX vf610 driver - Add MU root clock support for i.MX imx8mp driver - Amlogic g12: add neural network accelerator clock sources - Amlogic meson8: remove critical flag for main PLL divider - Amlogic meson8: add video decoder clock gates - Convert one more Renesas DT binding to json-schema - Enhance critical clock handling on Renesas platforms to only consider clocks that were enabled at boot time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (79 commits) clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845 ipq806x: gcc: add support for child probe clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static clk: qcom: ipq8074: Add correct index for PCIe clocks clk: <linux/clk-provider.h>: drop a duplicated word clk: renesas: cpg-mssr: Add r8a774e1 support dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1 clk: Drop duplicate selection in Kconfig clk: qcom: smd: Add support for MSM8992/4 rpm clocks clk: qcom: ipq8074: Add missing clocks for pcie dt-bindings: clock: qcom: ipq8074: Add missing bindings for PCIe Replace HTTP links with HTTPS ones: Common CLK framework clk: qcom: Add CPU clock driver for msm8996 dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996 soc: qcom: Separate kryo l2 accessors from PMU driver clk: meson: meson8b: add the vclk2_en gate clock clk: meson: meson8b: add the vclk_en gate clock clk: qcom: Fix return value check in apss_ipq6018_probe() clk: bcm: dvp: Add missing module informations clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2 ...
2020-07-29soc: qcom: geni: Fix unused label warningYueHaibing
If CONFIG_SERIAL_EARLYCON is not set, gcc warns this: drivers/soc/qcom/qcom-geni-se.c: In function 'geni_se_probe' drivers/soc/qcom/qcom-geni-se.c:914:1: warning: label 'exit' defined but not used [-Wunused-label] exit: ^~~~ Fixes: 048eb908a1f2 ("soc: qcom-geni-se: Add interconnect support to fix earlycon crash") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200722020619.25988-1-yuehaibing@huawei.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-29soc: qcom: smd-rpm: Fix kerneldocKrzysztof Kozlowski
Fix W=1 compile warnings (invalid kerneldoc): drivers/soc/qcom/smd-rpm.c:35: warning: Function parameter or member 'dev' not described in 'qcom_smd_rpm' drivers/soc/qcom/smd-rpm.c:99: warning: Function parameter or member 'state' not described in 'qcom_rpm_smd_write' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200729074415.28393-2-krzk@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-27soc: qcom: pdr: Reorder the PD state indication ackSibi Sankar
The Protection Domains (PD) have a mechanism to keep its resources enabled until the PD down indication is acked. Reorder the PD state indication ack so that clients get to release the relevant resources before the PD goes down. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Fixes: fbe639b44a82 ("soc: qcom: Introduce Protection Domain Restart helpers") Reported-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200701195954.9007-1-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-21soc: qcom: smd-rpm: Add IPQ6018 compatibleKathiravan T
This patch adds a compatible for the rpm on the Qualcomm IPQ6018 platform. Signed-off-by: Kathiravan T <kathirav@codeaurora.org> Link: https://lore.kernel.org/r/1595225543-12127-3-git-send-email-kathirav@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-20soc: qcom: geni: Fix NULL pointer dereferenceAkash Asthana
pdev struct doesn't exits for the devices whose status are disabled from DT node, in such cases NULL is returned from 'of_find_device_by_node' Later when we try to get drvdata from pdev struct NULL pointer dereference is triggered. Add a NULL check for return values to fix the issue. We were hitting this issue when one of QUP is disabled. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: 048eb908a1f2 ("soc: qcom-geni-se: Add interconnect support to fix earlycon crash") Reported-by: Sai Prakash Ranjan <saipraka@codeaurora.org> Signed-off-by: Akash Asthana <akashast@codeaurora.org> Link: https://lore.kernel.org/r/1594996342-26964-1-git-send-email-akashast@codeaurora.org [bjorn: s/wrapper_pdev/pdev/] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-13tty: serial: qcom-geni-serial: Drop the icc bw votes in suspend for consoleRajendra Nayak
When using the geni-serial as console, its important to be able to hit the lowest possible power state in suspend, even with no_console_suspend. The only thing that prevents it today on platforms like the sc7180 is the interconnect BW votes, which we certainly don't need when the system is in suspend. So in the suspend handler mark them as ACTIVE_ONLY (0x3) and on resume switch them back to the ALWAYS tag (0x7) Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Akash Asthana <akashast@codeaurora.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/1594704709-26072-1-git-send-email-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-10soc: qcom: Separate kryo l2 accessors from PMU driverIlia Lin
The driver provides kernel level API for other drivers to access the MSM8996 L2 cache registers. Separating the L2 access code from the PMU driver and making it public to allow other drivers use it. The accesses must be separated with a single spinlock, maintained in this driver. Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1593766185-16346-2-git-send-email-loic.poulain@linaro.org Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-30iov_iter: Move unnecessary inclusion of crypto/hash.hHerbert Xu
The header file linux/uio.h includes crypto/hash.h which pulls in most of the Crypto API. Since linux/uio.h is used throughout the kernel this means that every tiny bit of change to the Crypto API causes the entire kernel to get rebuilt. This patch fixes this by moving it into lib/iov_iter.c instead where it is actually used. This patch also fixes the ifdef to use CRYPTO_HASH instead of just CRYPTO which does not guarantee the existence of ahash. Unfortunately a number of drivers were relying on linux/uio.h to provide access to linux/slab.h. This patch adds inclusions of linux/slab.h as detected by build failures. Also skbuff.h was relying on this to provide a declaration for ahash_request. This patch adds a forward declaration instead. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-06-24soc: qcom-geni-se: Add interconnect support to fix earlycon crashAkash Asthana
QUP core clock is shared among all the SE drivers present on particular QUP wrapper, the system will reset(unclocked access) if earlycon used after QUP core clock is put to 0 from other SE drivers before real console comes up. As earlycon can't vote for it's QUP core need, to fix this add ICC support to common/QUP wrapper driver and put vote for QUP core from probe on behalf of earlycon and remove vote during earlycon exit call. Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reported-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1592908737-7068-3-git-send-email-akashast@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-24soc: qcom: geni: Support for ICC votingAkash Asthana
Add necessary macros and structure variables to support ICC BW voting from individual SE drivers. Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1592908737-7068-2-git-send-email-akashast@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-24soc: qcom: rpmh-rsc: Don't use ktime for timeout in write_tcs_reg_sync()Douglas Anderson
The write_tcs_reg_sync() may be called after timekeeping is suspended so it's not OK to use ktime. The readl_poll_timeout_atomic() macro implicitly uses ktime. This was causing a warning at suspend time. Change to just loop 1000000 times with a delay of 1 us between loops. This may give a timeout of more than 1 second but never less and is safe even if timekeeping is suspended. NOTE: I don't have any actual evidence that we need to loop here. It's possibly that all we really need to do is just read the value back to ensure that the pipes are cleaned and the looping/comparing is totally not needed. I never saw the loop being needed in my tests. However, the loop shouldn't hurt. Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Maulik Shah <mkshah@codeaurora.org> Fixes: 91160150aba0 ("soc: qcom: rpmh-rsc: Timeout after 1 second in write_tcs_reg_sync()") Reported-by: Maulik Shah <mkshah@codeaurora.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200528074530.1.Ib86e5b406fe7d16575ae1bb276d650faa144b63c@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-23soc: qcom: smd-rpm: Add msm8994 compatibleKonrad Dybcio
Add the compatible for the RPM in msm8994. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200602200407.320908-1-konradybcio@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-23soc: qcom: socinfo: add SM8250 entry to soc_id arrayDmitry Baryshkov
Add an entry for SM8250 SoC. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200525164817.2938638-4-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-23soc: qcom: socinfo: add file with SoC info format versionDmitry Baryshkov
To ease debugging socinfo driver for newer chips add debugfs file returning SoC info format version. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200525164817.2938638-3-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-23soc: qcom: socinfo: fix printing of pmic_modelDmitry Baryshkov
Print sensible string instead of just "(null)" for unknown PMIC models. Also as we are at it, do not let debugfs handler access past pmic_models array. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200525164817.2938638-2-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-23soc: qcom: socinfo: add support for newer socinfo dataDmitry Baryshkov
Add support for newer Qualcomm SoC info structures (up to version 0.15). Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200525164817.2938638-1-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-23drivers: soc: Add MSM8936 SMD RPM compatibleKonrad Dybcio
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Link: https://lore.kernel.org/r/20200613072745.1249003-4-vincent.knecht@mailoo.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-22soc: qcom: rpmh: Update rpmh_invalidate function to return voidMaulik Shah
Currently rpmh_invalidate() always returns success. Update its return type to void. Reviewed-by: Lina Iyer <ilina@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Link: https://lore.kernel.org/r/1592485553-29163-1-git-send-email-mkshah@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-22soc: qcom: rpmh: Allow RPMH on ARM SoCLina Iyer
Remove config restriction for RPMH on ARM64 platforms only. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Link: https://lore.kernel.org/r/1590750158-20661-1-git-send-email-mkshah@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-22soc: qcom: rpmh-rsc: Set suppress_bind_attrs flagMaulik Shah
rpmh-rsc driver is fairly core to system and should not be removable once its probed. However it allows to unbind driver from sysfs using below command which results into a crash on sc7180. echo 18200000.rsc > /sys/bus/platform/drivers/rpmh/unbind Lets prevent unbind at runtime by setting suppress_bind_attrs flag. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Link: https://lore.kernel.org/r/1592808805-2437-1-git-send-email-mkshah@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-22soc: qcom: socinfo: Add socinfo entry for SDM630Konrad Dybcio
This patch adds missing soc ID for SDM630. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200622075749.21925-4-konradybcio@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-08Merge tag 'rproc-v5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "This introduces device managed versions of functions used to register remoteproc devices, add support for remoteproc driver specific resource control, enables remoteproc drivers to specify ELF class and machine for coredumps. It integrates pm_runtime in the core for keeping resources active while the remote is booted and holds a wake source while recoverying a remote processor after a firmware crash. It refactors the remoteproc device's allocation path to simplify the logic, fix a few cleanup bugs and to not clone const strings onto the heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a zero-length array is replaced with flexible-array. A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm SM8250 gains support for audio, compute and sensor remoteprocs and the Qualcomm SC7180 modem support is cleaned up and improved. The Qualcomm glink subsystem-restart driver is merged into the main glink driver, the Qualcomm sysmon driver is extended to properly notify remote processors about all other remote processors' state transitions" * tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (43 commits) remoteproc: Fix an error code in devm_rproc_alloc() MAINTAINERS: Add myself as reviewer for Ingenic rproc driver remoteproc: ingenic: Added remoteproc driver remoteproc: Add support for runtime PM dt-bindings: Document JZ47xx VPU auxiliary processor remoteproc: wcss: Fix arguments passed to qcom_add_glink_subdev() remoteproc: Fix and restore the parenting hierarchy for vdev remoteproc: Fall back to using parent memory pool if no dedicated available remoteproc: Replace zero-length array with flexible-array remoteproc: wcss: add support for rpmsg communication remoteproc: core: Prevent system suspend during remoteproc recovery remoteproc: qcom_q6v5_mss: Remove unused q6v5_da_to_va function remoteproc: qcom_q6v5_mss: map/unmap mpss segments before/after use remoteproc: qcom_q6v5_mss: Drop accesses to MPSS PERPH register space dt-bindings: remoteproc: qcom: Replace halt-nav with spare-regs remoteproc: qcom: pas: Add SM8250 PAS remoteprocs dt-bindings: remoteproc: qcom: pas: Add SM8250 remoteprocs remoteproc: qcom_q6v5_mss: Extract mba/mpss from memory-region dt-bindings: remoteproc: qcom: Use memory-region to reference memory remoteproc: qcom: pas: Add SC7180 Modem support ...
2020-06-04Merge tag 'arm-drivers-5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM/SoC driver updates from Arnd Bergmann: "These are updates to SoC specific drivers that did not have another subsystem maintainer tree to go through for some reason: - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC that is getting added through the MIPS tree. - There are new soc_device identification drivers for TI K3, Qualcomm MSM8939 - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and Hisilicon hi6220 - The SCMI firmware interface can now work across ARM SMC/HVC as a transport. - Mediatek platforms now use a new driver for their "MMSYS" hardware block that controls clocks and some other aspects in behalf of the media and gpu drivers. - Some Tegra processors have improved power management support, including getting woken up by the PMIC and cluster power down during idle. - A new v4l staging driver for Tegra is added. - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and Tegra" * tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits) clk: sprd: fix compile-testing bus: bt1-axi: Build the driver into the kernel bus: bt1-apb: Build the driver into the kernel bus: bt1-axi: Use sysfs_streq instead of strncmp bus: bt1-axi: Optimize the return points in the driver bus: bt1-apb: Use sysfs_streq instead of strncmp bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method bus: bt1-apb: Fix show/store callback identations bus: bt1-apb: Include linux/io.h dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding memory: Add Baikal-T1 L2-cache Control Block driver bus: Add Baikal-T1 APB-bus driver bus: Add Baikal-T1 AXI-bus driver dt-bindings: bus: Add Baikal-T1 APB-bus binding dt-bindings: bus: Add Baikal-T1 AXI-bus binding staging: tegra-video: fix V4L2 dependency tee: fix crypto select drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static soc: ti: add k3 platforms chipid module driver dt-bindings: soc: ti: add binding for k3 platforms chipid module ...
2020-05-26cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driverStephan Gerhold
The Qualcomm SPM cpuidle driver seems to be the last driver still using the generic ARM CPUidle infrastructure. Converting it actually allows us to simplify the driver, and we end up being able to remove more lines than adding new ones: - We can parse the CPUidle states in the device tree directly with dt_idle_states (and don't need to duplicate that functionality into the spm driver). - Each "saw" device managed by the SPM driver now directly registers its own cpuidle driver, removing the need for any global (per cpu) state. The device tree binding is the same, so the driver stays compatible with all old device trees. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Lina Iyer <ilina@codeaurora.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-17Revert "soc: qcom: rpmh: Allow RPMH driver to be loaded as a module"Bjorn Andersson
Attempting to compile rpmh-rsc.c as a module with TRACING enabled causes a build error as no _rcuidle function is generated for tracepoints when CONFIG_MODULE is set. Attempts has been made, but no resolution has been agreed upon, so lets revert this commit for now. This reverts commit 1d3c6f86fd3f8b88c707f56d8c3f94e014b40e83. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-15soc: qcom: rpmh-rsc: Remove the pm_lockDouglas Anderson
It has been postulated that the pm_lock is bad for performance because a CPU currently running rpmh_flush() could block other CPUs from coming out of idle. Similarly CPUs coming out of / going into idle all need to contend with each other for the spinlock just to update the variable tracking who's in PM. Let's optimize this a bit. Specifically: - Use a count rather than a bitmask. This is faster to access and also means we can use the atomic_inc_return() function to really detect who the last one to enter PM was. - Accept that it's OK if we race and are doing the flush (because we think we're last) while another CPU is coming out of idle. As long as we block that CPU if/when it tries to do an active-only transfer we're OK. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20200504104917.v6.5.I295cb72bc5334a2af80313cbe97cb5c9dcb1442c@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-15soc: qcom: rpmh-rsc: Simplify locking by eliminating the per-TCS lockDouglas Anderson
The rpmh-rsc code had both a driver-level lock (sometimes referred to in comments as drv->lock) and a lock per-TCS. The idea was supposed to be that there would be times where you could get by with just locking a TCS lock and therefor other RPMH users wouldn't be blocked. The above didn't work out so well. Looking at tcs_write() the bigger drv->lock was held for most of the function anyway. Only the __tcs_buffer_write() and __tcs_set_trigger() calls were called without holding the drv->lock. It actually turns out that in tcs_write() we don't need to hold the drv->lock for those function calls anyway even if the per-TCS lock isn't there anymore. From the newly added comments in the code, this is because: - We marked "tcs_in_use" under lock. - Once "tcs_in_use" has been marked nobody else could be writing to these registers until the interrupt goes off. - The interrupt can't go off until we trigger w/ the last line of __tcs_set_trigger(). Thus, from a tcs_write() point of view, the per-TCS lock was useless. Looking at rpmh_rsc_write_ctrl_data(), only the per-TCS lock was held. It turns out, though, that this function already needs to be called with the equivalent of the drv->lock held anyway (we either need to hold drv->lock as we will in a future patch or we need to know no other CPUs could be running as happens today). Specifically rpmh_rsc_write_ctrl_data() might be writing to a TCS that has been borrowed for writing an active transation but it never checks this. Let's eliminate this extra overhead and avoid possible AB BA locking headaches. Suggested-by: Maulik Shah <mkshah@codeaurora.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20200504104917.v6.4.Ib8dccfdb10bf6b1fb1d600ca1c21d9c0db1ef746@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-15soc: qcom: rpmh-rsc: We aren't notified of our own failure w/ NOTIFY_BADDouglas Anderson
When a PM Notifier returns NOTIFY_BAD it doesn't get called with CPU_PM_ENTER_FAILED. It only get called for CPU_PM_ENTER_FAILED if someone else (further down the notifier chain) returns NOTIFY_BAD. Handle this case by taking our CPU out of the list of ones that have entered PM. Without this it's possible we could detect that the last CPU went down (and we would flush) even if some CPU was alive. That's not good since our flushing routines currently assume they're running on the last CPU for mutual exclusion. Fixes: 985427f997b6 ("soc: qcom: rpmh: Invoke rpmh_flush() for dirty caches") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Maulik Shah <mkshah@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20200504104917.v6.2.I1927d1bca2569a27b2d04986baf285027f0818a2@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-15soc: qcom: rpmh-rsc: Correctly ignore CPU_CLUSTER_PM notificationsDouglas Anderson
Our switch statement doesn't have entries for CPU_CLUSTER_PM_ENTER, CPU_CLUSTER_PM_ENTER_FAILED, and CPU_CLUSTER_PM_EXIT and doesn't have a default. This means that we'll try to do a flush in those cases but we won't necessarily be the last CPU down. That's not so ideal since our (lack of) locking assumes we're on the last CPU. Luckily this isn't as big a problem as you'd think since (at least on the SoC I tested) we don't get these notifications except on full system suspend. ...and on full system suspend we get them on the last CPU down. That means that the worst problem we hit is flushing twice. Still, it's good to make it correct. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Fixes: 985427f997b6 ("soc: qcom: rpmh: Invoke rpmh_flush() for dirty caches") Reported-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200504104917.v6.1.Ic7096b3b9b7828cdd41cd5469a6dee5eb6abf549@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-12soc: qcom: rpmh-rsc: Timeout after 1 second in write_tcs_reg_sync()Douglas Anderson
If our data still isn't there after 1 second, shout and give up. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20200415095953.v3.2.I8550512081c89ec7a545018a7d2d9418a27c1a7a@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-12soc: qcom: rpmh-rsc: Factor "tcs_reg_addr" and "tcs_cmd_addr" calculationDouglas Anderson
We can make some of the register access functions more readable by factoring out the calculations a little bit. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20200415095953.v3.1.Ic70288f256ff0be65cac6a600367212dfe39f6c9@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-11soc: qcom: socinfo: add msm8936/39 and apq8036/39 soc idsVincent Knecht
This patch adds missing SoC IDs for MSM8936/39 and their APQ variants. Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200511212733.214464-1-konradybcio@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-11soc: qcom: aoss: Add SM8250 compatibleBjorn Andersson
Add SM8250 compatible to the qcom_aoss binding and driver. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200427054202.2822144-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-07rpmsg: glink: Integrate glink_ssr in qcom_glinkBjorn Andersson
In all but the very special case of a system with _only_ glink_rpm, GLINK is dependent on glink_ssr, so move it to rpmsg and combine it with qcom_glink_native in the new qcom_glink kernel module. Acked-by: Chris Lew <clew@codeaurora.org> Acked-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Link: https://lore.kernel.org/r/20200423003736.2027371-4-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-07soc: qcom: glink_ssr: Internalize ssr_notifiersBjorn Andersson
Rather than carrying a special purpose blocking notifier for glink_ssr in remoteproc's qcom_common.c, move it into glink_ssr so allow wider reuse of the common one. The rpmsg glink header file is used in preparation for the next patch. Acked-by: Chris Lew <clew@codeaurora.org> Acked-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Link: https://lore.kernel.org/r/20200423003736.2027371-3-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-20soc: qcom: pdr: Remove impossible error conditionSibi Sankar
The patch fbe639b44a82: "soc: qcom: Introduce Protection Domain Restart helpers" leads to the following static checker warning: drivers/soc/qcom/pdr_interface.c:158 pdr_register_listener() '(resp.curr_state < (-((~0 >> 1)) - 1)) => (s32min-s32max < s32min)' These are casted to int so they can't be outside of int range. Fixes: fbe639b44a82 ("soc: qcom: Introduce Protection Domain Restart helpers") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200415062955.21439-1-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 15:01:25 +0000