summaryrefslogtreecommitdiff
path: root/drivers/soc/fsl
AgeCommit message (Collapse)Author
2021-05-01Merge tag 'iommu-updates-v5.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Big cleanup of almost unsused parts of the IOMMU API by Christoph Hellwig. This mostly affects the Freescale PAMU driver. - New IOMMU driver for Unisoc SOCs - ARM SMMU Updates from Will: - Drop vestigial PREFETCH_ADDR support (SMMUv3) - Elide TLB sync logic for empty gather (SMMUv3) - Fix "Service Failure Mode" handling (SMMUv3) - New Qualcomm compatible string (SMMUv2) - Removal of the AMD IOMMU performance counter writeable check on AMD. It caused long boot delays on some machines and is only needed to work around an errata on some older (possibly pre-production) chips. If someone is still hit by this hardware issue anyway the performance counters will just return 0. - Support for targeted invalidations in the AMD IOMMU driver. Before that the driver only invalidated a single 4k page or the whole IO/TLB for an address space. This has been extended now and is mostly useful for emulated AMD IOMMUs. - Several fixes for the Shared Virtual Memory support in the Intel VT-d driver - Mediatek drivers can now be built as modules - Re-introduction of the forcedac boot option which got lost when converting the Intel VT-d driver to the common dma-iommu implementation. - Extension of the IOMMU device registration interface and support iommu_ops to be const again when drivers are built as modules. * tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (84 commits) iommu: Streamline registration interface iommu: Statically set module owner iommu/mediatek-v1: Add error handle for mtk_iommu_probe iommu/mediatek-v1: Avoid build fail when build as module iommu/mediatek: Always enable the clk on resume iommu/fsl-pamu: Fix uninitialized variable warning iommu/vt-d: Force to flush iotlb before creating superpage iommu/amd: Put newline after closing bracket in warning iommu/vt-d: Fix an error handling path in 'intel_prepare_irq_remapping()' iommu/vt-d: Fix build error of pasid_enable_wpe() with !X86 iommu/amd: Remove performance counter pre-initialization test Revert "iommu/amd: Fix performance counter initialization" iommu/amd: Remove duplicate check of devid iommu/exynos: Remove unneeded local variable initialization iommu/amd: Page-specific invalidations for more than one page iommu/arm-smmu-v3: Remove the unused fields for PREFETCH_CONFIG command iommu/vt-d: Avoid unnecessary cache flush in pasid entry teardown iommu/vt-d: Invalidate PASID cache when root/context entry changed iommu/vt-d: Remove WO permissions on second-level paging entries iommu/vt-d: Report the right page fault address ...
2021-04-26Merge tag 'arm-drivers-5.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: TEE/OP-TEE: - Add tracepoints around calls to secure world Memory controller drivers: - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms - Add debug statistics to Tegra20 memory controller - Update Tegra bindings and convert to dtschema ARM SCMI Firmware: - Support for modular SCMI protocols and vendor specific extensions - New SCMI IIO driver - Per-cpu DVFS The other driver changes are all from the platform maintainers directly and reflect the drivers that don't fit into any other subsystem as well as treewide changes for a particular platform. SoCFPGA: - Various cleanups contributed by Krzysztof Kozlowski Mediatek: - add MT8183 support to mutex driver - MMSYS: use per SoC array to describe the possible routing - add MMSYS support for MT8183 and MT8167 - add support for PMIC wrapper with integrated arbiter - add support for MT8192/MT6873 Tegra: - Bug fixes to PMC and clock drivers NXP/i.MX: - Update SCU power domain driver to keep console domain power on. - Add missing ADC1 power domain to SCU power domain driver. - Update comments for single global power domain in SCU power domain driver. - Add i.MX51/i.MX53 unique id support to i.MX SoC driver. NXP/FSL SoC driver updates for v5.13 - Add ACPI support for RCPM driver - Use generic io{read,write} for QE drivers after performance optimized for PowerPC - Fix QBMAN probe to cleanup HW states correctly for kexec - Various cleanup and style fix for QBMAN/QE/GUTS drivers OMAP: - Preparation to use devicetree for genpd - ti-sysc needs iorange check improved when the interconnect target module has no control registers listed - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid issues with missing resources and unnecessary deferred probe - ti-sysc debug option can now detect more devices - ti-sysc now warns if an old incomplete devicetree data is found as we now rely on it being complete for am3 and 4 - soc init code needs to check for prcm and prm nodes for omap4/5 and dra7 - omap-prm driver needs to enable autoidle retention support for omap4 - omap5 clocks are missing gpmc and ocmc clock registers - pci-dra7xx now needs to use builtin_platform_driver instead of using builtin_platform_driver_probe for deferred probe to work Raspberry Pi: - Fix-up all RPi firmware drivers so as for unbind to happen in an orderly fashion - Support for RPi's PoE hat PWM bus Qualcomm - Improved detection for SCM calling conventions - Support for OEM specific wifi firmware path - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP" * tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) soc: aspeed: fix a ternary sign expansion bug memory: mtk-smi: Add device-link between smi-larb and smi-common memory: samsung: exynos5422-dmc: handle clk_set_parent() failure memory: renesas-rpc-if: fix possible NULL pointer dereference of resource clk: socfpga: fix iomem pointer cast on 64-bit soc: aspeed: Adapt to new LPC device tree layout pinctrl: aspeed-g5: Adapt to new LPC device tree layout ipmi: kcs: aspeed: Adapt to new LPC DTS layout ARM: dts: Remove LPC BMC and Host partitions dt-bindings: aspeed-lpc: Remove LPC partitioning soc: fsl: enable acpi support in RCPM driver soc: qcom: mdt_loader: Detect truncated read of segments soc: qcom: mdt_loader: Validate that p_filesz < p_memsz soc: qcom: pdr: Fix error return code in pdr_register_listener firmware: qcom_scm: Fix kernel-doc function names to match firmware: qcom_scm: Suppress sysfs bind attributes firmware: qcom_scm: Workaround lack of "is available" call on SC7180 firmware: qcom_scm: Reduce locking section for __get_convention() firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers" ...
2021-04-16Merge branches 'iommu/fixes', 'arm/mediatek', 'arm/smmu', 'arm/exynos', ↵Joerg Roedel
'unisoc', 'x86/vt-d', 'x86/amd' and 'core' into next
2021-04-08soc: fsl: enable acpi support in RCPM driverPeng Ma
This patch enables ACPI support in RCPM driver. Signed-off-by: Peng Ma <peng.ma@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2021-04-07iommu/fsl_pamu: enable the liodn when attaching a deviceChristoph Hellwig
Instead of a separate call to enable all devices from the list, just enable the liodn once the device is attached to the iommu domain. This also remove the DOMAIN_ATTR_FSL_PAMU_ENABLE iommu_attr. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Will Deacon <will@kernel.org> Acked-by: Li Yang <leoyang.li@nxp.com> Link: https://lore.kernel.org/r/20210401155256.298656-11-hch@lst.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07iommu/fsl_pamu: replace DOMAIN_ATTR_FSL_PAMU_STASH with a direct callChristoph Hellwig
Add a fsl_pamu_configure_l1_stash API that qman_portal can call directly instead of indirecting through the iommu attr API. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Will Deacon <will@kernel.org> Acked-by: Li Yang <leoyang.li@nxp.com> Link: https://lore.kernel.org/r/20210401155256.298656-8-hch@lst.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07iommu/fsl_pamu: remove ->domain_window_enableChristoph Hellwig
The only thing that fsl_pamu_window_enable does for the current caller is to fill in the prot value in the only dma_window structure, and to propagate a few values from the iommu_domain_geometry struture into the dma_window. Remove the dma_window entirely, hardcode the prot value and otherwise use the iommu_domain_geometry structure instead. Remove the now unused ->domain_window_enable iommu method. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Li Yang <leoyang.li@nxp.com> Link: https://lore.kernel.org/r/20210401155256.298656-7-hch@lst.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07iommu/fsl_pamu: remove support for multiple windowsChristoph Hellwig
The only domains allocated forces use of a single window. Remove all the code related to multiple window support, as well as the need for qman_portal to force a single window. Remove the now unused DOMAIN_ATTR_WINDOWS iommu_attr. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Will Deacon <will@kernel.org> Acked-by: Li Yang <leoyang.li@nxp.com> Link: https://lore.kernel.org/r/20210401155256.298656-6-hch@lst.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07iommu/fsl_pamu: remove support for setting DOMAIN_ATTR_GEOMETRYChristoph Hellwig
The default geometry is the same as the one set by qman_port given that FSL_PAMU depends on having 64-bit physical and thus DMA addresses. Remove the support to update the geometry and remove the now pointless geom_size field. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Will Deacon <will@kernel.org> Acked-by: Li Yang <leoyang.li@nxp.com> Link: https://lore.kernel.org/r/20210401155256.298656-4-hch@lst.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-06soc: fsl: qe: replace qe_io{read,write}* wrappers by generic io{read,write}*Christophe Leroy
Commit 6ac9b61786cc ("soc: fsl: qe: introduce qe_io{read,write}* wrappers") added specific I/O accessors for qe because at that time ioread/iowrite functions were sub-optimal on powerpc/32 compared to the architecture specific in_/out_ IO accessors. But as ioread/iowrite accessors are now equivalent since commit 894fa235eb4c ("powerpc: inline iomap accessors"), use them in order to allow removal of the qe specific ones. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2021-04-06soc: fsl: guts: remove unneeded semicolonYang Li
Eliminate the following coccicheck warning: ./drivers/soc/fsl/guts.c:120:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2021-04-06soc: fsl: qe: Use DEFINE_SPINLOCK() for spinlockZheng Yongjun
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2021-04-06soc: fsl: qbman: Delete useless kfree codeZheng Yongjun
The parameter of kfree function is NULL, so kfree code is useless, delete it. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2021-04-06soc: fsl: qbman: Ensure device cleanup is run for kexecRoy Pledge
Make sure that the QBMan device cleanup routines are executed when the device was previously initialized. This is needed for kexec since the device will keep it's state from the previous kernel that was executing. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2021-04-01soc/fsl: qbman: fix conflicting alignment attributesArnd Bergmann
When building with W=1, gcc points out that the __packed attribute on struct qm_eqcr_entry conflicts with the 8-byte alignment attribute on struct qm_fd inside it: drivers/soc/fsl/qbman/qman.c:189:1: error: alignment 1 of 'struct qm_eqcr_entry' is less than 8 [-Werror=packed-not-aligned] I assume that the alignment attribute is the correct one, and that qm_eqcr_entry cannot actually be unaligned in memory, so add the same alignment on the outer struct. Fixes: c535e923bb97 ("soc/fsl: Introduce DPAA 1.x QMan device driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210323131530.2619900-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-21soc: fsl: qe: add cpm_muram_free_addr() helperRasmus Villemoes
Add a helper that takes a virtual address rather than the muram offset. This will be used in a couple of places to avoid having to store both the offset and the virtual address, as well as removing NULL checks from the callers. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21soc: fsl: qe: store muram_vbase as a void pointer instead of u8Rasmus Villemoes
The two functions cpm_muram_offset() and cpm_muram_dma() both need a cast currently, one casts muram_vbase to do the pointer arithmetic on void pointers, the other casts the passed-in address u8*. It's simpler and more consistent to just always use void* and drop all the casting. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21soc: fsl: qe: make cpm_muram_offset take a const void* argumentRasmus Villemoes
Allow passing const-qualified pointers without requiring a cast in the caller. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16Merge tag 'arm-soc-drivers-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "There are a couple of subsystems maintained by other people that merge their drivers through the SoC tree, those changes include: - The SCMI firmware framework gains support for sensor notifications and for controlling voltage domains. - A large update for the Tegra memory controller driver, integrating it better with the interconnect framework - The memory controller subsystem gains support for Mediatek MT8192 - The reset controller framework gains support for sharing pulsed resets For Soc specific drivers in drivers/soc, the main changes are - The Allwinner/sunxi MBUS gets a rework for the way it handles dma_map_ops and offsets between physical and dma address spaces. - An errata fix plus some cleanups for Freescale Layerscape SoCs - A cleanup for renesas drivers regarding MMIO accesses. - New SoC specific drivers for Mediatek MT8192 and MT8183 power domains - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC identification. - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and SDX55. - A rework of the TI AM33xx 'genpd' power domain support to use information from DT instead of platform data - Support for TI AM64x SoCs - Allow building some Amlogic drivers as modules instead of built-in Finally, there are numerous cleanups and smaller bug fixes for Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips, Renesas, and Xilinx SoCs" * tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits) soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS firmware: xilinx: Properly align function parameter firmware: xilinx: Add a blank line after function declaration firmware: xilinx: Remove additional newline firmware: xilinx: Fix kernel-doc warnings firmware: xlnx-zynqmp: fix compilation warning soc: xilinx: vcu: add missing register NUM_CORE soc: xilinx: vcu: use vcu-settings syscon registers dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding soc: xilinx: vcu: drop useless success message clk: samsung: mark PM functions as __maybe_unused soc: samsung: exynos-chipid: initialize later - with arch_initcall soc: samsung: exynos-chipid: order list of SoCs by name memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe() memory: ti-emif-sram: only build for ARMv7 memory: tegra30: Support interconnect framework memory: tegra20: Support hardware versioning and clean up OPP table initialization dt-bindings: memory: tegra20-emc: Document opp-supported-hw property soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe() reset-controller: ti: force the write operation when assert or deassert ...
2020-11-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Trivial conflict in CAN, keep the net-next + the byteswap wrapper. Conflicts: drivers/net/can/usb/gs_usb.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-23soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)Hao Si
The local variable 'cpumask_t mask' is in the stack memory, and its address is assigned to 'desc->affinity' in 'irq_set_affinity_hint()'. But the memory area where this variable is located is at risk of being modified. During LTP testing, the following error was generated: Unable to handle kernel paging request at virtual address ffff000012e9b790 Mem abort info: ESR = 0x96000007 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000007 CM = 0, WnR = 0 swapper pgtable: 4k pages, 48-bit VAs, pgdp = 0000000075ac5e07 [ffff000012e9b790] pgd=00000027dbffe003, pud=00000027dbffd003, pmd=00000027b6d61003, pte=0000000000000000 Internal error: Oops: 96000007 [#1] PREEMPT SMP Modules linked in: xt_conntrack Process read_all (pid: 20171, stack limit = 0x0000000044ea4095) CPU: 14 PID: 20171 Comm: read_all Tainted: G B W Hardware name: NXP Layerscape LX2160ARDB (DT) pstate: 80000085 (Nzcv daIf -PAN -UAO) pc : irq_affinity_hint_proc_show+0x54/0xb0 lr : irq_affinity_hint_proc_show+0x4c/0xb0 sp : ffff00001138bc10 x29: ffff00001138bc10 x28: 0000ffffd131d1e0 x27: 00000000007000c0 x26: ffff8025b9480dc0 x25: ffff8025b9480da8 x24: 00000000000003ff x23: ffff8027334f8300 x22: ffff80272e97d000 x21: ffff80272e97d0b0 x20: ffff8025b9480d80 x19: ffff000009a49000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000040 x11: 0000000000000000 x10: ffff802735b79b88 x9 : 0000000000000000 x8 : 0000000000000000 x7 : ffff000009a49848 x6 : 0000000000000003 x5 : 0000000000000000 x4 : ffff000008157d6c x3 : ffff00001138bc10 x2 : ffff000012e9b790 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: irq_affinity_hint_proc_show+0x54/0xb0 seq_read+0x1b0/0x440 proc_reg_read+0x80/0xd8 __vfs_read+0x60/0x178 vfs_read+0x94/0x150 ksys_read+0x74/0xf0 __arm64_sys_read+0x24/0x30 el0_svc_common.constprop.0+0xd8/0x1a0 el0_svc_handler+0x34/0x88 el0_svc+0x10/0x14 Code: f9001bbf 943e0732 f94066c2 b4000062 (f9400041) ---[ end trace b495bdcb0b3b732b ]--- Kernel panic - not syncing: Fatal exception SMP: stopping secondary CPUs SMP: failed to stop secondary CPUs 0,2-4,6,8,11,13-15 Kernel Offset: disabled CPU features: 0x0,21006008 Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception ]--- Fix it by using 'cpumask_of(cpu)' to get the cpumask. Signed-off-by: Hao Si <si.hao@zte.com.cn> Signed-off-by: Lin Chen <chen.lin5@zte.com.cn> Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-11-23soc: fsl: handle RCPM errata A-008646 on SoC LS1021ABiwen Li
Hardware issue: - Reading register RCPM_IPPDEXPCR1 always return zero, this causes system firmware could not get correct information and wrongly do clock gating for all wakeup source IP during system suspend. Then those IPs will never get chance to wake system. Workaround: - Copy register RCPM_IPPDEXPCR1's setting to register SCFG_SPARECR8 to allow system firmware's psci method read it and do things accordingly. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-11-23soc: fsl: qbman: qman: Remove unused variable 'dequeue_wq'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/soc/fsl/qbman/qman.c: In function ‘qman_shutdown_fq’: drivers/soc/fsl/qbman/qman.c:2700:8: warning: variable ‘dequeue_wq’ set but not used [-Wunused-but-set-variable] Cc: Li Yang <leoyang.li@nxp.com> Cc: YueHaibing <yuehaibing@huawei.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-11-23soc: fsl: qe: qe_common: Fix misnamed function attribute 'addr'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/soc/fsl/qe/qe_common.c:237: warning: Function parameter or member 'addr' not described in 'cpm_muram_dma' drivers/soc/fsl/qe/qe_common.c:237: warning: Excess function parameter 'offset' description in 'cpm_muram_dma' Cc: Qiang Zhao <qiang.zhao@nxp.com> Cc: Li Yang <leoyang.li@nxp.com> Cc: Scott Wood <scottwood@freescale.com> Cc: act <dmalek@jlc.net> Cc: Dan Malek <dan@embeddedalley.com> Cc: "Software, Inc" <source@mvista.com> Cc: Vitaly Bordug <vbordug@ru.mvista.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-11-23soc: fsl: dpio: qbman-portal: Fix a bunch of kernel-doc misdemeanoursLee Jones
Fixes the following W=1 kernel build warning(s): drivers/soc/fsl/dpio/qbman-portal.c:430: warning: Function parameter or member 'inhibit' not described in 'qbman_swp_interrupt_set_inhibit' drivers/soc/fsl/dpio/qbman-portal.c:430: warning: Excess function parameter 'mask' description in 'qbman_swp_interrupt_set_inhibit' drivers/soc/fsl/dpio/qbman-portal.c:518: warning: Function parameter or member 'd' not described in 'qbman_eq_desc_clear' drivers/soc/fsl/dpio/qbman-portal.c:529: warning: Function parameter or member 'respond_success' not described in 'qbman_eq_desc_set_no_orp' drivers/soc/fsl/dpio/qbman-portal.c:529: warning: Excess function parameter 'response_success' description in 'qbman_eq_desc_set_no_orp' drivers/soc/fsl/dpio/qbman-portal.c:941: warning: Function parameter or member 's' not described in 'qbman_swp_push_get' drivers/soc/fsl/dpio/qbman-portal.c:941: warning: Excess function parameter 'p' description in 'qbman_swp_push_get' drivers/soc/fsl/dpio/qbman-portal.c:955: warning: Function parameter or member 's' not described in 'qbman_swp_push_set' drivers/soc/fsl/dpio/qbman-portal.c:955: warning: Excess function parameter 'p' description in 'qbman_swp_push_set' drivers/soc/fsl/dpio/qbman-portal.c:1052: warning: Function parameter or member 'd' not described in 'qbman_pull_desc_set_fq' drivers/soc/fsl/dpio/qbman-portal.c:1065: warning: Function parameter or member 'd' not described in 'qbman_pull_desc_set_wq' drivers/soc/fsl/dpio/qbman-portal.c:1079: warning: Function parameter or member 'd' not described in 'qbman_pull_desc_set_channel' drivers/soc/fsl/dpio/qbman-portal.c:1403: warning: Function parameter or member 'd' not described in 'qbman_release_desc_clear' drivers/soc/fsl/dpio/qbman-portal.c:1412: warning: Function parameter or member 'd' not described in 'qbman_release_desc_set_bpid' drivers/soc/fsl/dpio/qbman-portal.c:1412: warning: Function parameter or member 'bpid' not described in 'qbman_release_desc_set_bpid' drivers/soc/fsl/dpio/qbman-portal.c:1421: warning: Function parameter or member 'd' not described in 'qbman_release_desc_set_rcdi' drivers/soc/fsl/dpio/qbman-portal.c:1421: warning: Function parameter or member 'enable' not described in 'qbman_release_desc_set_rcdi' Cc: Roy Pledge <Roy.Pledge@nxp.com> Cc: Li Yang <leoyang.li@nxp.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-11-03soc/fsl/qbman: Add an argument to signal if NAPI processing is required.Sebastian Andrzej Siewior
dpaa_eth_napi_schedule() and caam_qi_napi_schedule() schedule NAPI if invoked from: - Hard interrupt context - Any context which is not serving soft interrupts Any context which is not serving soft interrupts includes hard interrupts so the in_irq() check is redundant. caam_qi_napi_schedule() has a comment about this: /* * In case of threaded ISR, for RT kernels in_irq() does not return * appropriate value, so use in_serving_softirq to distinguish between * softirq and irq contexts. */ if (in_irq() || !in_serving_softirq()) This has nothing to do with RT. Even on a non RT kernel force threaded interrupts run obviously in thread context and therefore in_irq() returns false when invoked from the handler. The extension of the in_irq() check with !in_serving_softirq() was there when the drivers were added, but in the out of tree FSL BSP the original condition was in_irq() which got extended due to failures on RT. The usage of in_xxx() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. Right he is, the above construct is clearly showing why. The following callchains have been analyzed to end up in dpaa_eth_napi_schedule(): qman_p_poll_dqrr() __poll_portal_fast() fq->cb.dqrr() dpaa_eth_napi_schedule() portal_isr() __poll_portal_fast() fq->cb.dqrr() dpaa_eth_napi_schedule() Both need to schedule NAPI. The crypto part has another code path leading up to this: kill_fq() empty_retired_fq() qman_p_poll_dqrr() __poll_portal_fast() fq->cb.dqrr() dpaa_eth_napi_schedule() kill_fq() is called from task context and ends up scheduling NAPI, but that's pointless and an unintended side effect of the !in_serving_softirq() check. The code path: caam_qi_poll() -> qman_p_poll_dqrr() is invoked from NAPI and I *assume* from crypto's NAPI device and not from qbman's NAPI device. I *guess* it is okay to skip scheduling NAPI (because this is what happens now) but could be changed if it is wrong due to `budget' handling. Add an argument to __poll_portal_fast() which is true if NAPI needs to be scheduled. This requires propagating the value to the caller including `qman_cb_dqrr' typedef which is used by the dpaa and the crypto driver. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Aymen Sghaier <aymen.sghaier@nxp.com> Cc: Herbert XS <herbert@gondor.apana.org.au> Cc: Li Yang <leoyang.li@nxp.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Tested-by: Camelia Groza <camelia.groza@nxp.com>
2020-09-22soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clkWang Hai
Fix smatch warning: drivers/soc/fsl/qe/ucc.c:526 ucc_set_tdm_rxtx_clk() warn: unsigned 'tdm_num' is never less than zero. 'tdm_num' is u32 type, never less than zero. Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-09-22soc: fsl: qman: convert to use be32_add_cpu()Liu Shixin
Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-09-22soc: fsl: dpio: remove set but not used 'addr_cena'Jason Yan
This addresses the following gcc warning with "make W=1": drivers/soc/fsl/dpio/qbman-portal.c: In function ‘qbman_swp_enqueue_multiple_direct’: drivers/soc/fsl/dpio/qbman-portal.c:650:11: warning: variable ‘addr_cena’ set but not used [-Wunused-but-set-variable] 650 | uint64_t addr_cena; | ^~~~~~~~~ Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-09-22soc: fsl: qbman: Fix return value on successKrzysztof Kozlowski
On error the function was meant to return -ERRNO. This also fixes compile warning: drivers/soc/fsl/qbman/bman.c:640:6: warning: variable 'err' set but not used [-Wunused-but-set-variable] Fixes: 0505d00c8dba ("soc/fsl/qbman: Cleanup buffer pools if BMan was initialized prior to bootup") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-06-04Merge tag 'arm-drivers-5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM/SoC driver updates from Arnd Bergmann: "These are updates to SoC specific drivers that did not have another subsystem maintainer tree to go through for some reason: - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC that is getting added through the MIPS tree. - There are new soc_device identification drivers for TI K3, Qualcomm MSM8939 - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and Hisilicon hi6220 - The SCMI firmware interface can now work across ARM SMC/HVC as a transport. - Mediatek platforms now use a new driver for their "MMSYS" hardware block that controls clocks and some other aspects in behalf of the media and gpu drivers. - Some Tegra processors have improved power management support, including getting woken up by the PMIC and cluster power down during idle. - A new v4l staging driver for Tegra is added. - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and Tegra" * tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits) clk: sprd: fix compile-testing bus: bt1-axi: Build the driver into the kernel bus: bt1-apb: Build the driver into the kernel bus: bt1-axi: Use sysfs_streq instead of strncmp bus: bt1-axi: Optimize the return points in the driver bus: bt1-apb: Use sysfs_streq instead of strncmp bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method bus: bt1-apb: Fix show/store callback identations bus: bt1-apb: Include linux/io.h dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding memory: Add Baikal-T1 L2-cache Control Block driver bus: Add Baikal-T1 APB-bus driver bus: Add Baikal-T1 AXI-bus driver dt-bindings: bus: Add Baikal-T1 APB-bus binding dt-bindings: bus: Add Baikal-T1 AXI-bus binding staging: tegra-video: fix V4L2 dependency tee: fix crypto select drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static soc: ti: add k3 platforms chipid module driver dt-bindings: soc: ti: add binding for k3 platforms chipid module ...
2020-05-28Merge tag 'soc-fsl-next-v5.8' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers NXP/FSL SoC driver updates for v5.8 DPAA2 DPIO driver - Prefer the CPU affined DPIO QUICC Engine drivers - Replace one-element array and use struct_size() helper Cleanups in various drivers * tag 'soc-fsl-next-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: dpio: Remove unused inline function qbman_write_eqcr_am_rt_register soc: fsl: qe: clean up an indentation issue soc: fsl: dpio: Prefer the CPU affine DPIO soc: fsl: qbman: Remove unused inline function qm_eqcr_get_ci_stashing soc: fsl: qe: Replace one-element array and use struct_size() helper treewide: Replace zero-length array with flexible-array Link: https://lore.kernel.org/r/20200527215740.9279-1-leoyang.li@nxp.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-22soc: fsl: dpio: Remove unused inline function qbman_write_eqcr_am_rt_registerYueHaibing
There's no callers in-tree anymore since commit 3b2abda7d28c ("soc: fsl: dpio: Replace QMAN array mode with ring mode enqueue") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-05-22soc: fsl: qe: clean up an indentation issueColin Ian King
There is a statement that not indented correctly, remove the extraneous space. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-05-22soc: fsl: dpio: Prefer the CPU affine DPIORoy Pledge
Use the cpu affine DPIO unless there isn't one which can happen if less DPIOs than cores are assign to the kernel. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-05-22soc: fsl: qbman: Remove unused inline function qm_eqcr_get_ci_stashingYueHaibing
There's no callers in-tree anymore. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-05-22soc: fsl: qe: Replace one-element array and use struct_size() helperGustavo A. R. Silva
The current codebase makes use of one-element arrays in the following form: struct something { int length; u8 data[1]; }; struct something *instance; instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL); instance->length = size; memcpy(instance->data, source, size); but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. So, replace the one-element array with a flexible-array member. Also, make use of the new struct_size() helper to properly calculate the size of struct qe_firmware. This issue was found with the help of Coccinelle and, audited and fixed _manually_. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Qiang Zhao <qiang.zhao@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-05-07soc: fsl: dpio: properly compute the consumer indexIoana Ciornei
Mask the consumer index before using it. Without this, we would be writing frame descriptors beyond the ring size supported by the QBMAN block. Fixes: 3b2abda7d28c ("soc: fsl: dpio: Replace QMAN array mode with ring mode enqueue") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-17soc: fsl: dpio: avoid stack usage warningArnd Bergmann
A 1024 byte variable on the stack will warn on any 32-bit architecture during compile-testing, and is generally a bad idea anyway: fsl/dpio/dpio-service.c: In function 'dpaa2_io_service_enqueue_multiple_desc_fq': fsl/dpio/dpio-service.c:495:1: error: the frame size of 1032 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] There are currently no callers of this function, so I cannot tell whether dynamic memory allocation is allowed once callers are added. Change it to kcalloc for now, if anyone gets a warning about calling this in atomic context after they start using it, they can fix it later. Link: https://lore.kernel.org/r/20200408185834.434784-1-arnd@arndb.de Fixes: 9d98809711ae ("soc: fsl: dpio: Adding QMAN multiple enqueue interface") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-04-17soc: fsl: dpio: fix incorrect pointer conversionsArnd Bergmann
Building dpio for 32 bit shows a new compiler warning from converting a pointer to a u64: drivers/soc/fsl/dpio/qbman-portal.c: In function 'qbman_swp_enqueue_multiple_desc_direct': drivers/soc/fsl/dpio/qbman-portal.c:870:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 870 | addr_cena = (uint64_t)s->addr_cena; The variable is not used anywhere, so removing the assignment seems to be the correct workaround. After spotting what seemed to be some confusion about address spaces, I ran the file through sparse, which showed more warnings: drivers/soc/fsl/dpio/qbman-portal.c:756:42: warning: incorrect type in argument 1 (different address spaces) drivers/soc/fsl/dpio/qbman-portal.c:756:42: expected void const volatile [noderef] <asn:2> *addr drivers/soc/fsl/dpio/qbman-portal.c:756:42: got unsigned int [usertype] *[assigned] p drivers/soc/fsl/dpio/qbman-portal.c:902:42: warning: incorrect type in argument 1 (different address spaces) drivers/soc/fsl/dpio/qbman-portal.c:902:42: expected void const volatile [noderef] <asn:2> *addr drivers/soc/fsl/dpio/qbman-portal.c:902:42: got unsigned int [usertype] *[assigned] p Here, the problem is passing a token from memremap() into __raw_readl(), which is only defined to work on MMIO addresses but not RAM. Turning this into a simple pointer dereference avoids this warning as well. Link: https://lore.kernel.org/r/20200408185904.460563-1-arnd@arndb.de Fixes: 3b2abda7d28c ("soc: fsl: dpio: Replace QMAN array mode with ring mode enqueue") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-04-03Merge tag 'arm-drivers-5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Arnd Bergmann: "These are the usual updates for SoC specific device drivers and related subsystems that don't have their own top-level maintainers: - ARM SCMI/SCPI updates to allow pluggable transport layers - TEE subsystem cleanups - A new driver for the Amlogic secure power domain controller - Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU and TI OMAP2+ sysc drivers. - Qualcomm SoC driver updates, including a new library module for "protection domain" notifications - Lots of smaller bugfixes and cleanups in other drivers" * tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits) soc: fsl: qe: fix sparse warnings for ucc_slow.c soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure soc: fsl: qe: fix sparse warnings for ucc_fast.c soc: fsl: qe: fix sparse warnings for qe_ic.c soc: fsl: qe: fix sparse warnings for ucc.c soc: fsl: qe: fix sparse warning for qe_common.c soc: fsl: qe: fix sparse warnings for qe.c soc: qcom: Fix QCOM_APR dependencies soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb soc: imx: drop COMPILE_TEST for IMX_SCU_SOC firmware: imx: add COMPILE_TEST for IMX_SCU driver soc: imx: gpc: fix power up sequencing soc: imx: increase build coverage for imx8m soc driver soc: qcom: apr: Add avs/audio tracking functionality dt-bindings: soc: qcom: apr: Add protection domain bindings soc: qcom: Introduce Protection Domain Restart helpers devicetree: bindings: firmware: add ipq806x to qcom_scm memory: tegra: Correct debugfs clk rate-range on Tegra124 memory: tegra: Correct debugfs clk rate-range on Tegra30 memory: tegra: Correct debugfs clk rate-range on Tegra20 ...
2020-03-24soc: fsl: qe: fix sparse warnings for ucc_slow.cLi Yang
Fixes the following sparse warnings, some of these endian issues are real issues that need to be fixed. drivers/soc/fsl/qe/ucc_slow.c:78:17: warning: incorrect type in assignment (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:78:17: expected struct ucc_slow *us_regs drivers/soc/fsl/qe/ucc_slow.c:78:17: got struct ucc_slow [noderef] <asn:2> *us_regs drivers/soc/fsl/qe/ucc_slow.c:81:18: warning: incorrect type in argument 1 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:81:18: expected void const volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:81:18: got restricted __be32 * drivers/soc/fsl/qe/ucc_slow.c:90:9: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:90:9: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:90:9: got restricted __be32 * drivers/soc/fsl/qe/ucc_slow.c:99:17: warning: incorrect type in assignment (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:99:17: expected struct ucc_slow *us_regs drivers/soc/fsl/qe/ucc_slow.c:99:17: got struct ucc_slow [noderef] <asn:2> *us_regs drivers/soc/fsl/qe/ucc_slow.c:102:18: warning: incorrect type in argument 1 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:102:18: expected void const volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:102:18: got restricted __be32 * drivers/soc/fsl/qe/ucc_slow.c:111:9: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:111:9: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:111:9: got restricted __be32 * drivers/soc/fsl/qe/ucc_slow.c:172:28: warning: Using plain integer as NULL pointer drivers/soc/fsl/qe/ucc_slow.c:174:25: warning: cast removes address space '<asn:2>' of expression drivers/soc/fsl/qe/ucc_slow.c:175:25: warning: cast removes address space '<asn:2>' of expression drivers/soc/fsl/qe/ucc_slow.c:194:23: warning: incorrect type in assignment (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:194:23: expected struct ucc_slow_pram *us_pram drivers/soc/fsl/qe/ucc_slow.c:194:23: got void [noderef] <asn:2> * drivers/soc/fsl/qe/ucc_slow.c:204:9: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:204:9: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:204:9: got restricted __be16 * drivers/soc/fsl/qe/ucc_slow.c:229:41: warning: incorrect type in assignment (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:229:41: expected struct qe_bd *tx_bd drivers/soc/fsl/qe/ucc_slow.c:229:41: got void [noderef] <asn:2> * drivers/soc/fsl/qe/ucc_slow.c:232:17: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:232:17: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:232:17: got restricted __be32 * drivers/soc/fsl/qe/ucc_slow.c:234:17: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:234:17: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:234:17: got unsigned int [usertype] * drivers/soc/fsl/qe/ucc_slow.c:238:9: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:238:9: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:238:9: got restricted __be32 * drivers/soc/fsl/qe/ucc_slow.c:239:9: warning: cast from restricted __be32 drivers/soc/fsl/qe/ucc_slow.c:239:9: warning: incorrect type in argument 1 (different base types) drivers/soc/fsl/qe/ucc_slow.c:239:9: expected unsigned int [usertype] val drivers/soc/fsl/qe/ucc_slow.c:239:9: got restricted __be32 [usertype] drivers/soc/fsl/qe/ucc_slow.c:239:9: warning: cast from restricted __be32 drivers/soc/fsl/qe/ucc_slow.c:239:9: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:239:9: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:239:9: got unsigned int [usertype] * drivers/soc/fsl/qe/ucc_slow.c:242:26: warning: incorrect type in assignment (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:242:26: expected struct qe_bd *rx_bd drivers/soc/fsl/qe/ucc_slow.c:242:26: got void [noderef] <asn:2> * drivers/soc/fsl/qe/ucc_slow.c:245:17: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:245:17: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:245:17: got unsigned int [usertype] * drivers/soc/fsl/qe/ucc_slow.c:247:17: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:247:17: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:247:17: got restricted __be32 * drivers/soc/fsl/qe/ucc_slow.c:251:9: warning: cast from restricted __be32 drivers/soc/fsl/qe/ucc_slow.c:251:9: warning: incorrect type in argument 1 (different base types) drivers/soc/fsl/qe/ucc_slow.c:251:9: expected unsigned int [usertype] val drivers/soc/fsl/qe/ucc_slow.c:251:9: got restricted __be32 [usertype] drivers/soc/fsl/qe/ucc_slow.c:251:9: warning: cast from restricted __be32 drivers/soc/fsl/qe/ucc_slow.c:251:9: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:251:9: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:251:9: got unsigned int [usertype] * drivers/soc/fsl/qe/ucc_slow.c:252:9: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:252:9: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:252:9: got restricted __be32 * drivers/soc/fsl/qe/ucc_slow.c:276:39: warning: mixing different enum types: drivers/soc/fsl/qe/ucc_slow.c:276:39: unsigned int enum ucc_slow_tx_oversampling_rate drivers/soc/fsl/qe/ucc_slow.c:276:39: unsigned int enum ucc_slow_rx_oversampling_rate drivers/soc/fsl/qe/ucc_slow.c:296:9: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:296:9: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:296:9: got restricted __be16 * drivers/soc/fsl/qe/ucc_slow.c:297:9: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:297:9: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:297:9: got restricted __be16 * Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-03-24soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structureLi Yang
Not necessary to set to 0 for the kzalloc'ed area so remove these assignements. Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-03-24soc: fsl: qe: fix sparse warnings for qe_ic.cLi Yang
Fixes the following sparse warnings: drivers/soc/fsl/qe/qe_ic.c:253:32: warning: incorrect type in argument 1 (different base types) drivers/soc/fsl/qe/qe_ic.c:253:32: expected restricted __be32 [noderef] [usertype] <asn:2> *base drivers/soc/fsl/qe/qe_ic.c:253:32: got unsigned int [noderef] [usertype] <asn:2> *regs drivers/soc/fsl/qe/qe_ic.c:254:26: warning: incorrect type in argument 1 (different base types) drivers/soc/fsl/qe/qe_ic.c:254:26: expected restricted __be32 [noderef] [usertype] <asn:2> *base drivers/soc/fsl/qe/qe_ic.c:254:26: got unsigned int [noderef] [usertype] <asn:2> *regs drivers/soc/fsl/qe/qe_ic.c:269:32: warning: incorrect type in argument 1 (different base types) drivers/soc/fsl/qe/qe_ic.c:269:32: expected restricted __be32 [noderef] [usertype] <asn:2> *base drivers/soc/fsl/qe/qe_ic.c:269:32: got unsigned int [noderef] [usertype] <asn:2> *regs drivers/soc/fsl/qe/qe_ic.c:270:26: warning: incorrect type in argument 1 (different base types) drivers/soc/fsl/qe/qe_ic.c:270:26: expected restricted __be32 [noderef] [usertype] <asn:2> *base drivers/soc/fsl/qe/qe_ic.c:270:26: got unsigned int [noderef] [usertype] <asn:2> *regs drivers/soc/fsl/qe/qe_ic.c:341:31: warning: incorrect type in argument 1 (different base types) drivers/soc/fsl/qe/qe_ic.c:341:31: expected restricted __be32 [noderef] [usertype] <asn:2> *base drivers/soc/fsl/qe/qe_ic.c:341:31: got unsigned int [noderef] [usertype] <asn:2> *regs drivers/soc/fsl/qe/qe_ic.c:357:31: warning: incorrect type in argument 1 (different base types) drivers/soc/fsl/qe/qe_ic.c:357:31: expected restricted __be32 [noderef] [usertype] <asn:2> *base drivers/soc/fsl/qe/qe_ic.c:357:31: got unsigned int [noderef] [usertype] <asn:2> *regs drivers/soc/fsl/qe/qe_ic.c:450:26: warning: incorrect type in argument 1 (different base types) drivers/soc/fsl/qe/qe_ic.c:450:26: expected restricted __be32 [noderef] [usertype] <asn:2> *base drivers/soc/fsl/qe/qe_ic.c:450:26: got unsigned int [noderef] [usertype] <asn:2> *regs Signed-off-by: Li Yang <leoyang.li@nxp.com> Reviewed-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
2020-03-24soc: fsl: qe: fix sparse warnings for ucc.cLi Yang
Fixes the following sparse warnings: drivers/soc/fsl/qe/ucc.c:637:20: warning: incorrect type in assignment (different address spaces) drivers/soc/fsl/qe/ucc.c:637:20: expected struct qe_mux *qe_mux_reg drivers/soc/fsl/qe/ucc.c:637:20: got struct qe_mux [noderef] <asn:2> * drivers/soc/fsl/qe/ucc.c:652:9: warning: incorrect type in argument 1 (different address spaces) drivers/soc/fsl/qe/ucc.c:652:9: expected void const volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc.c:652:9: got restricted __be32 * drivers/soc/fsl/qe/ucc.c:652:9: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc.c:652:9: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc.c:652:9: got restricted __be32 * Signed-off-by: Li Yang <leoyang.li@nxp.com> Reviewed-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
2020-03-24soc: fsl: qe: fix sparse warning for qe_common.cLi Yang
Fixes the following sparse warning: drivers/soc/fsl/qe/qe_common.c:75:48: warning: incorrect type in argument 2 (different base types) drivers/soc/fsl/qe/qe_common.c:75:48: expected restricted __be32 const [usertype] *addr drivers/soc/fsl/qe/qe_common.c:75:48: got unsigned int * Signed-off-by: Li Yang <leoyang.li@nxp.com> Reviewed-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
2020-03-24soc: fsl: qe: fix sparse warnings for qe.cLi Yang
Fixes the following sparse warnings: drivers/soc/fsl/qe/qe.c:426:9: warning: cast to restricted __be32 drivers/soc/fsl/qe/qe.c:528:41: warning: incorrect type in assignment (different base types) drivers/soc/fsl/qe/qe.c:528:41: expected unsigned long long static [addressable] [toplevel] [usertype] extended_modes drivers/soc/fsl/qe/qe.c:528:41: got restricted __be64 const [usertype] extended_modes Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-03-10soc: fsl: dpio: register dpio irq handlers after dpio createGrigore Popescu
The dpio irqs must be registered when you can actually receive interrupts, ie when the dpios are created. Kernel goes through NULL pointer dereference errors followed by kernel panic [1] because the dpio irqs are enabled before the dpio is created. [1] Unable to handle kernel NULL pointer dereference at virtual address 0040 fsl_mc_dpio dpio.14: probed fsl_mc_dpio dpio.13: Adding to iommu group 11 ISV = 0, ISS = 0x00000004 Unable to handle kernel NULL pointer dereference at virtual address 0040 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000000040] user address but active_mm is swapper Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 151 Comm: kworker/2:1 Not tainted 5.6.0-rc4-next-20200304 #1 Hardware name: NXP Layerscape LX2160ARDB (DT) Workqueue: events deferred_probe_work_func pstate: 00000085 (nzcv daIf -PAN -UAO) pc : dpaa2_io_irq+0x18/0xe0 lr : dpio_irq_handler+0x1c/0x28 sp : ffff800010013e20 x29: ffff800010013e20 x28: ffff0026d9b4c140 x27: ffffa1d38a142018 x26: ffff0026d2953400 x25: ffffa1d38a142018 x24: ffffa1d38a7ba1d8 x23: ffff800010013f24 x22: 0000000000000000 x21: 0000000000000072 x20: ffff0026d2953400 x19: ffff0026d2a68b80 x18: 0000000000000001 x17: 000000002fb37f3d x16: 0000000035eafadd x15: ffff0026d9b4c5b8 x14: ffffffffffffffff x13: ff00000000000000 x12: 0000000000000038 x11: 0101010101010101 x10: 0000000000000040 x9 : ffffa1d388db11e4 x8 : ffffa1d38a7e40f0 x7 : ffff0026da414f38 x6 : 0000000000000000 x5 : ffff0026da414d80 x4 : ffff5e5353d0c000 x3 : ffff800010013f60 x2 : ffffa1d388db11c8 x1 : ffff0026d2a67c00 x0 : 0000000000000000 Call trace: dpaa2_io_irq+0x18/0xe0 dpio_irq_handler+0x1c/0x28 __handle_irq_event_percpu+0x78/0x2c0 handle_irq_event_percpu+0x38/0x90 handle_irq_event+0x4c/0xd0 handle_fasteoi_irq+0xbc/0x168 generic_handle_irq+0x2c/0x40 __handle_domain_irq+0x68/0xc0 gic_handle_irq+0x64/0x150 el1_irq+0xb8/0x180 _raw_spin_unlock_irqrestore+0x14/0x48 irq_set_affinity_hint+0x6c/0xa0 dpaa2_dpio_probe+0x2a4/0x518 fsl_mc_driver_probe+0x28/0x70 really_probe+0xdc/0x320 driver_probe_device+0x5c/0xf0 __device_attach_driver+0x88/0xc0 bus_for_each_drv+0x7c/0xc8 __device_attach+0xe4/0x140 device_initial_probe+0x18/0x20 bus_probe_device+0x98/0xa0 device_add+0x41c/0x758 fsl_mc_device_add+0x184/0x530 dprc_scan_objects+0x280/0x370 dprc_probe+0x124/0x3b0 fsl_mc_driver_probe+0x28/0x70 really_probe+0xdc/0x320 driver_probe_device+0x5c/0xf0 __device_attach_driver+0x88/0xc0 bus_for_each_drv+0x7c/0xc8 __device_attach+0xe4/0x140 device_initial_probe+0x18/0x20 bus_probe_device+0x98/0xa0 deferred_probe_work_func+0x74/0xa8 process_one_work+0x1c8/0x470 worker_thread+0x1f8/0x428 kthread+0x124/0x128 ret_from_fork+0x10/0x18 Code: a9bc7bfd 910003fd a9025bf5 a90363f7 (f9402015) ---[ end trace 38298e1a29e7a570 ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs Mem abort info: ESR = 0x96000004 CM = 0, WnR = 0 EC = 0x25: DABT (current EL), IL = 32 bits [0000000000000040] user address but active_mm is swapper SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000000040] user address but active_mm is swapper SMP: failed to stop secondary CPUs 0-2 Kernel Offset: 0x21d378600000 from 0xffff800010000000 PHYS_OFFSET: 0xffffe92180000000 CPU features: 0x10002,21806008 Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Grigore Popescu <grigore.popescu@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-02-21soc: fsl: dpio: fix dereference of pointer p before null checkColin Ian King
Pointer p is currently being dereferenced before it is null checked on a memory allocation failure check. Fix this by checking if p is null before dereferencing it. Addresses-Coverity: ("Dereference before null check") Fixes: 3b2abda7d28c ("soc: fsl: dpio: Replace QMAN array mode with ring mode enqueue") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-02-19soc: fsl: dpio: Replace QMAN array mode with ring mode enqueueYouri Querry
This change of algorithm will enable faster bulk enqueue. This will greatly benefit XDP bulk enqueue. Signed-off-by: Youri Querry <youri.querry_1@nxp.com> Acked-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 22:52:22 +0000