summaryrefslogtreecommitdiff
path: root/drivers/slimbus
AgeCommit message (Collapse)Author
2020-05-15slimbus: core: Fix mismatch in of_node_get/putSaravana Kannan
Adding missing corresponding of_node_put Fixes: 7588a511bdb4 ("slimbus: core: add support to device tree helper") Signed-off-by: Saravana Kannan <saravanak@google.com> [Srini: added fixes tag, removed NULL check and updated log] Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200511151334.362-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-15slimbus: core: Set fwnode for a device when setting of_nodeSaravana Kannan
When setting the of_node for a newly created device, also set the fwnode. This allows fw_devlink feature to work for slimbus devices. Also, remove some unnecessary NULL checks. The functions in question already do NULL checks. Signed-off-by: Saravana Kannan <saravanak@google.com> [Srini: removed unnecessary NULL check from other patch] Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200511151334.362-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28slimbus: ngd: remove redundant assignmentSrinivas Kandagatla
remove redundant assignment, as this is already done fewlines lines before. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200417093914.22052-1-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28slimbus: ngd: get drvdata from correct deviceSrinivas Kandagatla
Get drvdata directly from parent instead of ngd dev, as ngd dev can probe defer and previously set drvdata will become null. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200417093618.7929-1-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12slimbus: ngd: add v2.1.0 compatibleSrinivas Kandagatla
This patch adds compatible for SlimBus Controller on SDM845. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200312152510.12224-1-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14slimbus: qcom: add missed clk_disable_unprepare in removeChuhong Yuan
The remove misses to disable and unprepare rclk and hclk. Add calls to clk_disable_unprepare to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200109103148.5612-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14slimbus: Use the correct style for SPDX License IdentifierNishad Kamdar
This patch corrects the SPDX License Identifier style in header file related to SLIMbus driver. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200109103148.5612-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14slimbus: qcom-ngd-ctrl: Use dma_request_chan() instead ↵Peter Ujfalusi
dma_request_slave_channel() dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200109103148.5612-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-18slimbus: fix slim_tid_txn()Srinivas Kandagatla
fix below issue reported by coccicheck ./drivers/slimbus/slimbus.h:440:3-46: duplicated argument to && or || Looks like this was a typo, SLIM_MSG_MC_REQUEST_CHANGE_VALUE is command which requires transaction ID, so fix it, this also fix the warning. Reported-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20190818093902.29993-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-18slimbus: qcom-ngd-ctrl: Add of_node_put() before returnNishka Dasgupta
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return in two places. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20190818093902.29993-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-20slimbus: core: generate uevent for non-dt onlySrinivas Kandagatla
Rely on MODULE_ALIAS() for automatic kernel module loading, rather than basing it on the OF compatible. This ensures that drivers without of_device_id table, such as wcd9335, will be automatically loaded. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> [bjorn: Added commit message] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-20slimbus: remove redundant dev_err messageDing Xiang
devm_ioremap_resource already contains error message, so remove the redundant dev_err message Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-10slimbus: fix kerneldoc commentsJonathan Corbet
The kerneldoc comments in drivers/slimbus/stream.c were not properly formatted, leading to a distinctly unsatisfying "no structured comments found" warning in the docs build. Sprinkle some asterisks around so that the comments will be properly recognized. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25slimbus: fix a potential NULL pointer dereference in of_qcom_slim_ngd_registerKangjie Lu
In case platform_device_alloc fails, the fix returns an error code to avoid the NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22slimbus: core: add missing spin_lock_init on txn_lockSrinivas Kandagatla
Add missing spin lock intialization this also fixes the spinlock bad magic warning. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22slimbus: core: use slim_device_update_status() to update statusSrinivas Kandagatla
use slim_device_update_status() instead of directly calling the device_status() callback. Move slim_device_update_status() before probe to avoid forward declaration too. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22slimbus: core: do not call device_status under a lockSrinivas Kandagatla
Calling device_status callback under a lock would prevent drivers to do any slimbus trasactions which would invoke this lock like get_laddr(). Remove this unnecessary lock! Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22slimbus: core: match full device idSrinivas Kandagatla
match full slim device id instead of just product and manufacture code, this will allow drivers to be much more specific to that device. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-06slimbus: ngd: fix spelling mistake "exeeds" -> "exceeds"Colin Ian King
There is a spelling mistake in a dev_err message, fix this. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-06slimbus: qcom-ctrl: simplify getting .driver_dataWolfram Sang
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27slimbus: ngd: QCOM_QMI_HELPERS has to be selectedNiklas Cassel
QCOM_QMI_HELPERS is a hidden kconfig, so the proper usage is to select it, not depend upon it. Because of this change, we now also need to depend on the same Kconfigs as QCOM_QMI_HELPERS depends on. Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27slimbus: ngd: Fix build error on x86Srinivas Kandagatla
on non DT platforms like x86 of_match_node is set to NULL, dereferencing directly would throw an error. Fix this by doing this in two steps, get the match then the data. Reported-by: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-07slimbus: ngd: remove unnecessary checkSrinivas Kandagatla
SLIM_MSG_CLK_PAUSE_SEQ_FLG is never set in any of the slim core, so performing a check in ngd driver is totally unnecessary. Also this patch fixes warning about mc field overflow reported with CoverityScan. Making clk pause feature optional will be added to slim core in next development cycle. Reported-by: Colin Ian King <colin.king@canonical.com> Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25slimbus: core: add support to ueventSrinivas Kandagatla
This patch adds support to uevent to help automatic module loading. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25slimbus: core: update device status in probeSrinivas Kandagatla
device status update can be racy with probe in some cases, so make sure it take lock during the probe. Also after probe the device is expected to be ready for communications, so make sure that a logical address can be assigned to it after probe. If it fails to do so then probe defer such instances. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25slimbus: core: match device tree based devices correctlySrinivas Kandagatla
device_id for device tree based devices come from dt compatible string, such drivers need not provide non dt style device id table. Match those device using compatible strings. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25slimbus: ngd: validate logical address assigned by remoteSrinivas Kandagatla
Validate logical address assigned by remote, in failure cases this value is all zeors. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25silmbus: ngd: register controller after power up.Srinivas Kandagatla
Register slimbus controller only after finishing powerup sequnce so that we do not endup in situation where core starts sending transactions before the controller is ready. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25slimbus: ngd: return proper error code instead of zeroSrinivas Kandagatla
It looks like there is a typo in probe return. Fix it. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25slimbus: ngd: register ngd driver only once.Srinivas Kandagatla
Move ngd platform driver out of loop so that it registers only once. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14slimbus: ngd: mark PM functions as __maybe_unusedArnd Bergmann
qcom_slim_ngd_runtime_suspend is protected by an #ifdef, qcom_slim_ngd_runtime_idle is now, which causes a build time warning: drivers/slimbus/qcom-ngd-ctrl.c:1470:12: error: 'qcom_slim_ngd_runtime_idle' defined but not used [-Werror=unused-function] Marking both as __maybe_unused lets us get rid of the warning as well as the #ifdef. Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-08slimbus: stream: Fix htmldocs warningsSrinivas Kandagatla
This patch fixes below warning during building htmldoc: slimbus.h:352: warning: Function parameter or member 'name' not described in 'slim_stream_runtime' This patch also removes documentation for state variable in struct slim_stream_runtime which was redundant and removed. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07slimbus: ngd: add stream supportSrinivas Kandagatla
This patch adds support to stream support, this involve implementing user specific implementation of Data channel management and channel management SLIMbus messages. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07slimbus: stream: add stream supportSrinivas Kandagatla
This patch adds support to SLIMbus stream apis for slimbus device. SLIMbus streaming involves adding support to Data Channel Management and channel Reconfiguration Messages to slim core plus few stream apis. >From slim device side the apis are very simple mostly inline with other stream apis. Currently it only supports Isochronous and Push/Pull transport protocols, which are sufficient for audio use cases. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07slimbus: ngd: Add qcom SLIMBus NGD driverSrinivas Kandagatla
This patch adds suppor to Qualcomm SLIMBus Non-Generic Device (NGD) controller driver. This is light-weight SLIMBus controller driver responsible for communicating with slave HW directly over the bus using messaging interface, and communicating with master component residing on ADSP for bandwidth and data-channel management Based on intial work from Karthikeyan Ramasubramanian <kramasub@codeaurora.org> and Sagar Dharia <sdharia@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Craig Tatlor <ctatlor97@gmail.com> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07slimbus: messaging: add slim_alloc/free_txn_tid()Srinivas Kandagatla
This patch adds slim_alloc_txn_tid() and slim_free_txn_tid() api to allow controllers like ngd to allocate tids for user specific commands. This also cleans up the existing code to use single place for tid allocations and free. This patch also make the tid allocation cyclic one, its very useful to track the transactions back during debug. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07slimbus: core: add of_slim_device_get() helperSrinivas Kandagatla
On SLIMBus controllers like Qcom NGD(non ported device), controller can request logical address once the remote side is powered, having a helper function like this to explicitly enumerate the bus is helpful. Also codec drivers which are taking to interface device would need such a helper too. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07slimbus: qcom: remove redundant depends in KconfigSrinivas Kandagatla
QCOM SLIMBus controller is already under a 'if SLIMBUS' in Kconfig, having depends on SLIMBUS is totally redundant. Just remove it. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07slimbus: messaging: initialize completion correctlySrinivas Kandagatla
slim_val_inf can contain random value from stack, make sure the completion is initialized to NULL while filling the msg. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07slimbus: messaging: remove multiple calls to pm_runtime_mark_last_busySrinivas Kandagatla
There seems to be a multiple calls to pm_runtime_mark_last_busy(), which looks like a typo. Fix this by properly adding pm_runtime_put_autosuspend to put controller in auto suspend state. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07slimbus: messaging: pass correct wbufSrinivas Kandagatla
There seems to be a typo while filling msg for slim_write, wbuf is set to NULL instead of rbuf. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-14slimbus: qcom: remove unused variableSrinivas Kandagatla
This patch fixes below warning when driver is compiled with W=1 qcom-ctrl.c: In function 'qcom_slim_rxwq': qcom-ctrl.c:442:13: warning: variable 'len' set but not used [-Wunused-but-set-variable] len seems to be unused in this function, so remove it. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23slimbus: Fix out-of-bounds access in slim_slicesize()Geert Uytterhoeven
With gcc-4.1.2: slimbus/messaging.c: In function ‘slim_slicesize’: slimbus/messaging.c:186: warning: statement with no effect Indeed, clamp() is a macro not operating in-place, but returning the clamped value. Hence the value is not clamped at all, which may lead to an out-of-bounds access. Fix this by assigning the clamped value. Fixes: afbdcc7c384b0d44 ("slimbus: Add messaging APIs to slimbus framework") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15slimbus: core: use put_device() instead of kfree()Arvind Yadav
Never directly free @dev after calling device_register(), even if it returned an error! Always use put_device() to give up the reference initialized. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09slimbus: qcom: add HAS_IOMEM dependencySrinivas Kandagatla
Below build failure was reported on UML, ERROR: "devm_ioremap_resource" [drivers/slimbus/slim-qcom-ctrl.ko] undefined! ERROR: "__ioread32_copy" [drivers/slimbus/slim-qcom-ctrl.ko] undefined! ERROR: "__iowrite32_copy" [drivers/slimbus/slim-qcom-ctrl.ko] undefined! ERROR: "devm_ioremap" [drivers/slimbus/slim-qcom-ctrl.ko] undefined! This patch fixes it by making qcom slimbus depend on HAS_IOMEM, as these are only defined when HAS_IOMEM is selected. Reported-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09slimbus: qcom: Fix return value check in qcom_slim_probe()Wei Yongjun
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09slimbus: Fix missing unlock on error in slim_msg_response()Wei Yongjun
Add the missing unlock before return from function slim_msg_response() in the error handling case. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09slimbus: Use GFP_ATOMIC under spin lockWei Yongjun
A spin lock is taken here so we should use GFP_ATOMIC. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09slimbus: make functions slim_ack_txn and slim_alloc_txbuf staticColin Ian King
The functions slim_ack_txn and slim_alloc_txbuf are local to the source and do not need to be in global scope, so make them static. Cleans up sparse warnings: symbol 'slim_ack_txn' was not declared. Should it be static? symbol 'slim_alloc_txbuf' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 18:30:51 +0000