| Age | Commit message (Collapse) | Author |
|---|
|
Host uses the Memory Move Tool to copy data from any source/destination
combination of system memory and IOC memory.
Memory Move Tool box request contains two SGE fields, First SGE field must
contains the source buffer details described by an MPI Simple SGE. The
second SGE field must contains the destination buffer details described by
an MPI Simple SGE.
Source -> Destination
1. IOC -> IOC (Both the SGE's will be filled by application)
2. HOST -> HOST (Both the SGE's will be filled by the host,
application should give sgl_offset to first SGE offset)
3. IOC -> HOST (Application will fill the first SGE and set the
sgl_offset to second SGE and hence driver fills
the second SGE)
4. HOST -> IOC (Application will fill IOC buffer information in the
first SGE and set the sgl_offset to second SGE.
Then driver will fill the second SGE with Host buffer
information and just before posting the command to the
firmware, driver will swap these two SGEs so that first
SGE contains the HOST buffer information and second SGE
contains the IOC information.
Driver has to take care only of the 4th case, other three cases are by
default supported by the current driver design.
Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If driver sees the NVMe drive with "DEVICE_BLOCKED" AccessStatus in its
PCIe Device Page0, then driver removes the drive from its internal list and
does not allow any IOCTL commands to be sent to the drive and will return
the IOCTLs with "-ENODEV" status.
The driver will now allow NVMe Encapsulated IOCTL issued to the NVMe device
with an access status of DEVICE_BLOCKED. This change allows the user to
flash new drive firmware online and revive the drive.
Add NVMe device only the driver's internal list even though the device is
in the blocked state so that the device will be visible to Apps. This way
Apps can send NVMe Encapsulated IOCTLs to this drive and bring the drive
online. This NVMe drive with DEVICE_BLOCKED access status won't added to
the SML, it will be added only in the driver's internal list.
[mkp: clarified desc]
Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
SES device of managed PCIe switch will be enumerated same as NVMe drives.
The device info type for this SES device is
MPI26_PCIE_DEVINFO_SCSI (0x4),
whereas the device info type for NVMe drives is
MPI26_PCIE_DEVINFO_NVME (0x3).
Based on this device info type driver determines whether the device is NVMe
drive or a SES device of a managed PCIe switch.
This SES device doesn't have the PCIe device page 2 information like NVMe
drives, so driver won't read PCIe device page 2 information for SES device.
This SES device uses only IEEE SGL's, So driver build's IEEE SGL's whenever
it receives any SCSI commands for this SES device.
Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Updated MPI to 2.6.8 specification and header files to 2.00.54.
Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Issue:
During online Firmware upgrade operations it is possible that MaxDevHandles
filled in IOCFacts may change with new FW. With this we may observe kernel
panics when driver try to access the pd_handles or blocking_handles buffers
at offset greater than the old firmware's MaxDevHandle value.
Fix:
_base_check_ioc_facts_changes() looks for increase/decrease in IOCFacts
attributes during online firmware upgrade and increases the pd_handles,
blocking_handles, etc buffer sizes to new firmware's MaxDevHandle value if
this new firmware's MaxDevHandle value is greater than the old firmware's
MaxDevHandle value.
Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Driver gets a request frame from the free pool of DMA-able request frames
and fill in the required information and pass the address of the frame to
IOC/FW to pull the complete request frame. In certain places the driver
used the request frame allocated from the free pool without completely
clearing the previous data stored in it. The request contents were cleared
only for the size of the new request to be issued and that left out some
stale data in the unused part of the request. Though the IOC/FW is not
expected to access the request beyond the specified size, it is good
practice to clear complete request message frame.
So reinitialize the complete request message frame with 0s before using
it.
Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
PCIe Lane margin tool box request requires IEEE sgl's and hence driver
fills the SGL field with IEEE sgl's while issuing the PCIe Lane margin
ioctl request to the HBA firmware.
Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There are several occasions where variable rc is being initialized with a
value that is never read and error is being re-assigned a little later on.
Clean up the code by removing rc entirely and just returning the return
value from the call to pm8001_issue_ssp_tmf
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In hisi_sas_lu_reset(), we call internal abort for SAS and SATA device
codepaths -> consolidate into a single call.
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The format specifier "%p" can leak kernel address, and use "%pK" instead.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove some unnecessary code, including:
- Explicit zeroing of memory allocated for dmam_alloc_coherent()
- Some duplicated code
- Some redundant masking
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For functions which always return 0, which is never checked, make to return
void.
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
It will free irq automatically if devm_request_irq() failed, so drop
free_irq() if devm_request_irq() failed.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The SMP frame response is written to the command table and not the SMP
response pointer from libsas, so don't bother DMA mapping (and unmapping)
the SMP response from libsas.
Suggested-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The call to kmap_atomic() in the SMP command completion code is
unnecessary, since kmap() is only really concerned with highmem, which is
not relevant on arm64. The controller only finds itself in arm64 systems.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For a system with PAGE_SIZE of 16K or 64K, the size every time we want to
alloc may be small like 4K, but for function dmam_alloc_coherent(), the
least size it allocates is PAGE_SIZE, so it will waste much memory for the
situation.
To solve the issue, limit the minimum allocation size of slot buf to
PAGE_SIZE.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For struct hisi_sas_status_buffer, it contains struct hisi_sas_err_record
and iu[1024]. The struct iu[1024] will be filled fully by the response of
disks, so it is not need to initialize them to 0, but for the struct
hisi_sas_err_record, SAS controller only fill some fields of
hisi_sas_err_record according to hw designer, so it should be initialised
to 0. After the change, cpu utilization percentage of memset() is changed
from 1.7% to 0.12%.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix a possible out-of-bounds access in hisi_sas_debug_I_T_nexus_reset().
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The AXI and RAS register values should also should be snapshot at debugfs.
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The value of IOST/ITCT is updated to cache first, and then synchronize to
DDR periodically. So the value in IOST/ITCT cache is the latest data and
it's important for debugging.
So, the HW cache of IOST and ITCT should be snapshot at debugfs.
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix how the pointer is set in hisi_sas_debugfs_iost_show() and
hisi_sas_debugfs_itct_show().
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In commit 1273d65f29045 ("scsi: hisi_sas: change queue depth from 512 to
4096"), the depth of each queue is the same as the max IPTT in the system.
As such, as long as we have an IPTT allocated, we will have enough space on
any delivery queue.
All .get_free_slot functions were checking for space on the queue by
reading the DQ read pointer. Drop this, and also raise the code into common
code, as there is nothing hw specific remaining.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is a small optimisation to be had by making the max IPTT the same for
all hw revisions, that being we can drop the check for read and write
pointer being the same in the get free slot function.
Change v1 hw to have max IPTT of 4096 - same as v2 and v3 hw - and
drop hisi_sas_hw.max_command_entries.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Configure CDNS_UFS_REG_HCLKDIV in .hce_enable_notify() instead of
.setup_clock() because if UFSHCD resets the controller ip because of phy or
device related errors then CDNS_UFS_REG_HCLKDIV is reset to default value
and .setup_clock() is not called later in the sequence whereas
.hce_enable_notify will be called everytime controller is reenabled.
Signed-off-by: Anil Varughese <aniljoy@cadence.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The data structure used for log messages is so large that it can cause a
boot failure. Since allocations from that data structure can fail anyway,
use kmalloc() / kfree() instead of that data structure.
See also https://bugzilla.kernel.org/show_bug.cgi?id=204119.
See also commit ded85c193a39 ("scsi: Implement per-cpu logging buffer") # v4.0.
Reported-by: Jan Palus <jpalus@fastmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jan Palus <jpalus@fastmail.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If scsi_target_block() fails that can break the code that calls this
function. Hence complain loudly if scsi_target_block() fails.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The only 'new_state' values passed by upstream kernel code to
scsi_internal_device_unblock_nowait() are SDEV_RUNNING and
SDEV_TRANSPORT_OFFLINE. These are the only values that should be passed to
this function. Hence check the value of the 'new_state' argument to avoid
that scsi_internal_device_unblock_nowait() would be used to trigger an
illegal SCSI device state transition. In this context 'illegal' means not
allowed by scsi_device_set_state().
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Define new a type: uc_string_id for easier string handling and less
casting. Reduce number or string copies in price of a dynamic allocation.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Tested-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning (Building: m68k):
drivers/scsi/wd33c93.c: In function round_4 :
drivers/scsi/wd33c93.c:1856:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
case 2: ++x;
^~~
drivers/scsi/wd33c93.c:1857:3: note: here
case 3: ++x;
^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/scsi/sun3_scsi.c: warning: this statement may fall through
[-Wimplicit-fallthrough=]: => 399:9, 403:9
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings (Building: sparc defconfig):
drivers/scsi/qlogicpti.c: In function 'qlogicpti_mbox_command':
drivers/scsi/qlogicpti.c:202:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
case 6: sbus_writew(param[5], qpti->qregs + MBOX5);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/qlogicpti.c:203:2: note: here
case 5: sbus_writew(param[4], qpti->qregs + MBOX4);
^~~~
drivers/scsi/qlogicpti.c:203:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
case 5: sbus_writew(param[4], qpti->qregs + MBOX4);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/qlogicpti.c:204:2: note: here
case 4: sbus_writew(param[3], qpti->qregs + MBOX3);
^~~~
drivers/scsi/qlogicpti.c:204:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
case 4: sbus_writew(param[3], qpti->qregs + MBOX3);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/qlogicpti.c:205:2: note: here
case 3: sbus_writew(param[2], qpti->qregs + MBOX2);
^~~~
drivers/scsi/qlogicpti.c:205:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
case 3: sbus_writew(param[2], qpti->qregs + MBOX2);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/qlogicpti.c:206:2: note: here
case 2: sbus_writew(param[1], qpti->qregs + MBOX1);
^~~~
drivers/scsi/qlogicpti.c:206:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
case 2: sbus_writew(param[1], qpti->qregs + MBOX1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/qlogicpti.c:207:2: note: here
case 1: sbus_writew(param[0], qpti->qregs + MBOX0);
^~~~
drivers/scsi/qlogicpti.c:256:19: warning: this statement may fall through [-Wimplicit-fallthrough=]
case 6: param[5] = sbus_readw(qpti->qregs + MBOX5);
~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/qlogicpti.c:257:2: note: here
case 5: param[4] = sbus_readw(qpti->qregs + MBOX4);
^~~~
drivers/scsi/qlogicpti.c:257:19: warning: this statement may fall through [-Wimplicit-fallthrough=]
case 5: param[4] = sbus_readw(qpti->qregs + MBOX4);
~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/qlogicpti.c:258:2: note: here
case 4: param[3] = sbus_readw(qpti->qregs + MBOX3);
^~~~
drivers/scsi/qlogicpti.c:258:19: warning: this statement may fall through [-Wimplicit-fallthrough=]
case 4: param[3] = sbus_readw(qpti->qregs + MBOX3);
~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/qlogicpti.c:259:2: note: here
case 3: param[2] = sbus_readw(qpti->qregs + MBOX2);
^~~~
drivers/scsi/qlogicpti.c:259:19: warning: this statement may fall through [-Wimplicit-fallthrough=]
case 3: param[2] = sbus_readw(qpti->qregs + MBOX2);
~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/qlogicpti.c:260:2: note: here
case 2: param[1] = sbus_readw(qpti->qregs + MBOX1);
^~~~
drivers/scsi/qlogicpti.c:260:19: warning: this statement may fall through [-Wimplicit-fallthrough=]
case 2: param[1] = sbus_readw(qpti->qregs + MBOX1);
~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/qlogicpti.c:261:2: note: here
case 1: param[0] = sbus_readw(qpti->qregs + MBOX0);
^~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/scsi/ibmvscsi/ibmvfc.c: In function 'ibmvfc_npiv_login_done':
drivers/scsi/ibmvscsi/ibmvfc.c:4022:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
ibmvfc_retry_host_init(vhost);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/ibmvscsi/ibmvfc.c:4023:2: note: here
case IBMVFC_MAD_DRIVER_FAILED:
^~~~
drivers/scsi/ibmvscsi/ibmvfc.c: In function 'ibmvfc_bsg_request':
drivers/scsi/ibmvscsi/ibmvfc.c:1830:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
port_id = (bsg_request->rqst_data.h_els.port_id[0] << 16) |
~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(bsg_request->rqst_data.h_els.port_id[1] << 8) |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
bsg_request->rqst_data.h_els.port_id[2];
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/ibmvscsi/ibmvfc.c:1833:2: note: here
case FC_BSG_RPT_ELS:
^~~~
drivers/scsi/ibmvscsi/ibmvfc.c:1838:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
port_id = (bsg_request->rqst_data.h_ct.port_id[0] << 16) |
~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(bsg_request->rqst_data.h_ct.port_id[1] << 8) |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
bsg_request->rqst_data.h_ct.port_id[2];
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/ibmvscsi/ibmvfc.c:1841:2: note: here
case FC_BSG_RPT_CT:
^~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The commit de516379e85f ("scsi: megaraid_sas: changes to function
prototypes") introduced a comilation warning due to it changed the function
prototype of read_fw_status_reg() to take an instance pointer instead, but
forgot to remove an unused variable.
drivers/scsi/megaraid/megaraid_sas_fusion.c: In function
'megasas_fusion_update_can_queue':
drivers/scsi/megaraid/megaraid_sas_fusion.c:326:39: warning: variable
'reg_set' set but not used [-Wunused-but-set-variable]
struct megasas_register_set __iomem *reg_set;
^~~~~~~
Fixes: de516379e85f ("scsi: megaraid_sas: changes to function prototypes")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix sparse warnings:
drivers/scsi/megaraid/megaraid_sas_fusion.c:3369:1: warning: symbol 'complete_cmd_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:3535:6: warning: symbol 'megasas_sync_irqs' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:3554:1: warning: symbol 'megasas_complete_cmd_dpc_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:3573:13: warning: symbol 'megasas_isr_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:3604:1: warning: symbol 'build_mpt_mfi_pass_thru' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:3661:40: warning: symbol 'build_mpt_cmd' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:3688:1: warning: symbol 'megasas_issue_dcmd_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:3881:5: warning: symbol 'megasas_wait_for_outstanding_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:4005:6: warning: symbol 'megasas_refire_mgmt_cmd' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:4525:25: warning: symbol 'megasas_get_peer_instance' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:4825:7: warning: symbol 'megasas_fusion_crash_dump' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Current driver report dev_loss_tmo to 0 for NVMe devices with short cable
pull. This causes NVMe controller to be freed along with NVMe namespace.
The side affect is IO would stop. By not setting dev_loss_tmo to 0, NVMe
namespace would stay until cable is plugged back in. This allows IO to
resume afterward.
[mkp: commit desc]
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A hang was observed in the fcport delete path when the device was
responding slow and an issue-lip path (results in session termination) was
taken.
Fix this by issuing logo requests unconditionally.
PID: 19491 TASK: ffff8e23e67bb150 CPU: 0 COMMAND: "kworker/0:0"
#0 [ffff8e2370297bf8] __schedule at ffffffffb4f7dbb0
#1 [ffff8e2370297c88] schedule at ffffffffb4f7e199
#2 [ffff8e2370297c98] schedule_timeout at ffffffffb4f7ba68
#3 [ffff8e2370297d40] msleep at ffffffffb48ad9ff
#4 [ffff8e2370297d58] qlt_free_session_done at ffffffffc0c32052 [qla2xxx]
#5 [ffff8e2370297e20] process_one_work at ffffffffb48bcfdf
#6 [ffff8e2370297e68] worker_thread at ffffffffb48bdca6
#7 [ffff8e2370297ec8] kthread at ffffffffb48c4f81
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Leverage the generic routine, qla24xx_update_fw_options(), for the
configuration of firmware options for ISP27xx/ISP28xx.
Signed-off-by: Andrew Vasquez <andrewv@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The following sequence of event leads to NVME port disappearing:
- device port shut
- nvme_fc_unregister_remoteport
- device port online
- remote port delete completes
- relogin is scheduled
- "post gidpn" message appears due to rscn generation # mismatch
In short, if a device comes back online sooner than an unregister
completion, a mismatch in rscn generation number occurs, which is not
handled correctly during device relogin. Fix this by starting with a redo
of GNL.
When ql2xextended_error_logging is enabled, the re-plugged device's
discovery stops with the following messages printed:
--8<--
qla2xxx [0000:41:00.0]-480d:3: Relogin scheduled.
qla2xxx [0000:41:00.0]-4800:3: DPC handler sleeping.
qla2xxx [0000:41:00.0]-2902:3: qla24xx_handle_relogin_event 21:00:00:24:ff:17:9e:91 DS 0 LS 7 P 0 del 2 cnfl
(null) rscn 1|2 login 1|2 fl 1
qla2xxx [0000:41:00.0]-28e9:3: qla24xx_handle_relogin_event 1666 21:00:00:24:ff:17:9e:91 post gidpn
qla2xxx [0000:41:00.0]-480e:3: Relogin end.
--8<--
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Current code misses or fails to account for proper recovery during early
initialization failures:
- Properly unwind allocations during probe() failures.
- Protect against non-initialization memory allocations during
unwinding.
- Propagate error status during HW initialization.
- Release SCSI host reference when memory allocations fail.
Signed-off-by: Andrew Vasquez <andrewv@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
when fabric scan thread encounters IOCB Q Full, schedule a delayed work to
retry fabric scan.
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For any qla2xxx async command, the SRB buffer is used to send it. In
setting up the SRB buffer, the timer for this command is started before all
memory allocation has finished. Under low memory pressure, memory alloc
can go to sleep and not wake up before the timer expires. Once timer has
expired, the timer thread will access uninitialize fields resulting into
NULL pointer crash.
This patch fixes this crash by moving the start of timer after everything
is setup.
backtrace shows following
PID: 3720 TASK: ffff996928401040 CPU: 0 COMMAND: "qla2xxx_1_dpc"
0 [ffff99652751b698] __schedule at ffffffff965676c7
1 [ffff99652751b728] schedule at ffffffff96567bc9
2 [ffff99652751b738] schedule_timeout at ffffffff965655e8
3 [ffff99652751b7e0] io_schedule_timeout at ffffffff9656726d
4 [ffff99652751b810] congestion_wait at ffffffff95fd8d12
5 [ffff99652751b870] isolate_migratepages_range at ffffffff95fddaf3
6 [ffff99652751b930] compact_zone at ffffffff95fdde96
7 [ffff99652751b980] compact_zone_order at ffffffff95fde0bc
8 [ffff99652751ba20] try_to_compact_pages at ffffffff95fde481
9 [ffff99652751ba80] __alloc_pages_direct_compact at ffffffff9655cc31
10 [ffff99652751bae0] __alloc_pages_slowpath at ffffffff9655d101
11 [ffff99652751bbd0] __alloc_pages_nodemask at ffffffff95fc0e95
12 [ffff99652751bc80] dma_generic_alloc_coherent at ffffffff95e3217f
13 [ffff99652751bcc8] x86_swiotlb_alloc_coherent at ffffffff95e6b7a1
14 [ffff99652751bcf8] qla2x00_rft_id at ffffffffc055b5e0 [qla2xxx]
15 [ffff99652751bd50] qla2x00_loop_resync at ffffffffc0533e71 [qla2xxx]
16 [ffff99652751be68] qla2x00_do_dpc at ffffffffc05210ca [qla2xxx]
PID: 0 TASK: ffffffff96a18480 CPU: 0 COMMAND: "swapper/0"
0 [ffff99652fc03ae0] machine_kexec at ffffffff95e63674
1 [ffff99652fc03b40] __crash_kexec at ffffffff95f1ce12
2 [ffff99652fc03c10] crash_kexec at ffffffff95f1cf00
3 [ffff99652fc03c28] oops_end at ffffffff9656c758
4 [ffff99652fc03c50] no_context at ffffffff9655aa7e
5 [ffff99652fc03ca0] __bad_area_nosemaphore at ffffffff9655ab15
6 [ffff99652fc03cf0] bad_area_nosemaphore at ffffffff9655ac86
7 [ffff99652fc03d00] __do_page_fault at ffffffff9656f6b0
8 [ffff99652fc03d70] do_page_fault at ffffffff9656f915
9 [ffff99652fc03da0] page_fault at ffffffff9656b758
[exception RIP: unknown or invalid address]
RIP: 0000000000000000 RSP: ffff99652fc03e50 RFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff99652b79a600 RCX: ffff99652b79a760
RDX: ffff99652b79a600 RSI: ffffffffc0525ad0 RDI: ffff99652b79a600
RBP: ffff99652fc03e60 R8: ffffffff96a18a18 R9: ffffffff96ee3c00
R10: 0000000000000002 R11: ffff99652fc03de8 R12: ffff99652b79a760
R13: 0000000000000100 R14: ffffffffc0525ad0 R15: ffff99652b79a600
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
10 [ffff99652fc03e50] qla2x00_sp_timeout at ffffffffc0525af8 [qla2xxx]
11 [ffff99652fc03e68] call_timer_fn at ffffffff95ea7f58
12 [ffff99652fc03ea0] run_timer_softirq at ffffffff95eaa3bd
13 [ffff99652fc03f18] __do_softirq at ffffffff95ea0f05
14 [ffff99652fc03f88] call_softirq at ffffffff9657832c
15 [ffff99652fc03fa0] do_softirq at ffffffff95e2e675
16 [ffff99652fc03fc0] irq_exit at ffffffff95ea1285
17 [ffff99652fc03fd8] smp_apic_timer_interrupt at ffffffff965796c8
18 [ffff99652fc03ff0] apic_timer_interrupt at ffffffff96575df2
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Relogin fails to move forward due to scan_state flag indicating device is
not there. Before relogin process, Session delete process accidently
modified the scan_state flag.
[mkp: typos plus corrected Fixes: sha as reported by sfr]
Fixes: 2dee5521028c ("scsi: qla2xxx: Fix login state machine freeze")
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Reject eh_{abort|device_reset|target_reset} when rport is being torn down
or chip is down.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Firmware dump captured during LOOP Init error does not yield any
significant information. This patch removes call to trigger firmware dump
collection during Loop Initialization.
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For target mode, the default number of Q-Pairs allowed to use is 2. If the
number of Q-Pairs allocated is lower than the default Q-Pairs, then lower
value should be the set as default.
[mkp: typo]
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If an abort times out, the Abort IOCB completion and Abort timer can race
against each other. This patch provides unique error code for timer path to
allow proper cleanup.
[mkp: typo]
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
[ 17.177276] qla2xxx 0000:05:00.0: DMA-API: device driver frees DMA memory
with different size [device address=0x00000006198b0000] [map size=32784 bytes]
[unmap size=8208 bytes]
[ 17.177390] RIP: 0010:check_unmap+0x7a2/0x1750
[ 17.177425] Call Trace:
[ 17.177438] debug_dma_free_coherent+0x1b5/0x2d5
[ 17.177470] dma_free_attrs+0x7f/0x140
[ 17.177489] qla24xx_sp_unmap+0x1e2/0x610 [qla2xxx]
[ 17.177509] qla24xx_async_gnnft_done+0x9c6/0x17d0 [qla2xxx]
[ 17.177535] qla2x00_do_work+0x514/0x2200 [qla2xxx]
Fixes: b5f3bc39a0e8 ("scsi: qla2xxx: Fix inconsistent DMA mem alloc/free")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
With debug kernel we see following wanings indicating memory leak.
[28809.523959] WARNING: CPU: 3 PID: 6790 at lib/dma-debug.c:978
dma_debug_device_change+0x166/0x1d0
[28809.523964] pci 0000:0c:00.6: DMA-API: device driver has pending DMA
allocations while released from device [count=5]
[28809.523964] One of leaked entries details: [device
address=0x00000002aefe4000] [size=8208 bytes] [mapped with DMA_BIDIRECTIONAL]
[mapped as coherent]
Fix this by unmapping DMA memory.
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
