summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2020-01-15scsi: qla1280: Fix dma firmware download, if dma address is 64bitThomas Bogendoerfer
Do firmware download with 64bit LOAD_RAM command, if driver is using 64bit addressing. Link: https://lore.kernel.org/r/20200114160936.1517-1-tbogendoerfer@suse.de Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-15scsi: storvsc: Correctly set number of hardware queues for IDE diskLong Li
Commit 0ed881027690 ("scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue") introduced a regression for disks attached to IDE. For these disks the host VSP only offers one VMBUS channel. Setting multiple queues can overload the VMBUS channel and result in performance drop for high queue depth workload on system with large number of CPUs. Fix it by leaving the number of hardware queues to 1 (default value) for IDE disks. Fixes: 0ed881027690 ("scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue") Link: https://lore.kernel.org/r/1578960516-108228-1-git-send-email-longli@linuxonhyperv.com Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-15scsi: fnic: fix invalid stack accessArnd Bergmann
gcc -O3 warns that some local variables are not properly initialized: drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_hang_notify': drivers/scsi/fnic/vnic_dev.c:511:16: error: 'a0' is used uninitialized in this function [-Werror=uninitialized] vdev->args[0] = *a0; ~~~~~~~~~~~~~~^~~~~ drivers/scsi/fnic/vnic_dev.c:691:6: note: 'a0' was declared here u64 a0, a1; ^~ drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized] vdev->args[1] = *a1; ~~~~~~~~~~~~~~^~~~~ drivers/scsi/fnic/vnic_dev.c:691:10: note: 'a1' was declared here u64 a0, a1; ^~ drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_mac_addr': drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized] vdev->args[1] = *a1; ~~~~~~~~~~~~~~^~~~~ drivers/scsi/fnic/vnic_dev.c:698:10: note: 'a1' was declared here u64 a0, a1; ^~ Apparently the code relies on the local variables occupying adjacent memory locations in the same order, but this is of course not guaranteed. Use an array of two u64 variables where needed to make it work correctly. I suspect there is also an endianness bug here, but have not digged in deep enough to be sure. Fixes: 5df6d737dd4b ("[SCSI] fnic: Add new Cisco PCI-Express FCoE HBA") Fixes: mmtom ("init/Kconfig: enable -O3 for all arches") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200107201602.4096790-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-15scsi: iscsi: Fail session and connection on transport registration failureGabriel Krisman Bertazi
If the transport cannot be registered, the session/connection creation needs to be failed early to let the initiator know. Otherwise, the system will have an outstanding connection that cannot be used nor removed by open-iscsi. The result is similar to the error below, triggered by injecting a failure in the transport's registration path. openiscsi reports success: root@debian-vm:~# iscsiadm -m node -T iqn:lun1 -p 127.0.0.1 -l Logging in to [iface: default, target: iqn:lun1, portal: 127.0.0.1,3260] Login to [iface: default, target: iqn:lun1, portal:127.0.0.1,3260] successful. But cannot remove the session afterwards, since the kernel is in an inconsistent state. root@debian-vm:~# iscsiadm -m node -T iqn:lun1 -p 127.0.0.1 -u iscsiadm: No matching sessions found Link: https://lore.kernel.org/r/20200106185817.640331-4-krisman@collabora.com Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-15scsi: iscsi: Don't destroy session if there are outstanding connectionsNick Black
A faulty userspace that calls destroy_session() before destroying the connections can trigger the failure. This patch prevents the issue by refusing to destroy the session if there are outstanding connections. ------------[ cut here ]------------ kernel BUG at mm/slub.c:306! invalid opcode: 0000 [#1] SMP PTI CPU: 1 PID: 1224 Comm: iscsid Not tainted 5.4.0-rc2.iscsi+ #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:__slab_free+0x181/0x350 [...] [ 1209.686056] RSP: 0018:ffffa93d4074fae0 EFLAGS: 00010246 [ 1209.686694] RAX: ffff934efa5ad800 RBX: 000000008010000a RCX: ffff934efa5ad800 [ 1209.687651] RDX: ffff934efa5ad800 RSI: ffffeb4041e96b00 RDI: ffff934efd402c40 [ 1209.688582] RBP: ffffa93d4074fb80 R08: 0000000000000001 R09: ffffffffbb5dfa26 [ 1209.689425] R10: ffff934efa5ad800 R11: 0000000000000001 R12: ffffeb4041e96b00 [ 1209.690285] R13: ffff934efa5ad800 R14: ffff934efd402c40 R15: 0000000000000000 [ 1209.691213] FS: 00007f7945dfb540(0000) GS:ffff934efda80000(0000) knlGS:0000000000000000 [ 1209.692316] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1209.693013] CR2: 000055877fd3da80 CR3: 0000000077384000 CR4: 00000000000006e0 [ 1209.693897] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1209.694773] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1209.695631] Call Trace: [ 1209.695957] ? __wake_up_common_lock+0x8a/0xc0 [ 1209.696712] iscsi_pool_free+0x26/0x40 [ 1209.697263] iscsi_session_teardown+0x2f/0xf0 [ 1209.698117] iscsi_sw_tcp_session_destroy+0x45/0x60 [ 1209.698831] iscsi_if_rx+0xd88/0x14e0 [ 1209.699370] netlink_unicast+0x16f/0x200 [ 1209.699932] netlink_sendmsg+0x21a/0x3e0 [ 1209.700446] sock_sendmsg+0x4f/0x60 [ 1209.700902] ___sys_sendmsg+0x2ae/0x320 [ 1209.701451] ? cp_new_stat+0x150/0x180 [ 1209.701922] __sys_sendmsg+0x59/0xa0 [ 1209.702357] do_syscall_64+0x52/0x160 [ 1209.702812] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1209.703419] RIP: 0033:0x7f7946433914 [...] [ 1209.706084] RSP: 002b:00007fffb99f2378 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 1209.706994] RAX: ffffffffffffffda RBX: 000055bc869eac20 RCX: 00007f7946433914 [ 1209.708082] RDX: 0000000000000000 RSI: 00007fffb99f2390 RDI: 0000000000000005 [ 1209.709120] RBP: 00007fffb99f2390 R08: 000055bc84fe9320 R09: 00007fffb99f1f07 [ 1209.710110] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000038 [ 1209.711085] R13: 000055bc8502306e R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace a2d933ede7f730d8 ]--- Link: https://lore.kernel.org/r/20191226203148.2172200-1-krisman@collabora.com Signed-off-by: Nick Black <nlb@google.com> Co-developed-by: Salman Qazi <sqazi@google.com> Signed-off-by: Salman Qazi <sqazi@google.com> Co-developed-by: Junho Ryu <jayr@google.com> Signed-off-by: Junho Ryu <jayr@google.com> Co-developed-by: Khazhismel Kumykov <khazhy@google.com> Signed-off-by: Khazhismel Kumykov <khazhy@google.com> Co-developed-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-15scsi: ufs-mediatek: add apply_dev_quirks variant operationStanley Chu
Add vendor-specific variant callback "apply_dev_quirks" to MediaTek UFS driver. Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Asutosh Das <asutoshd@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/1578726707-6596-3-git-send-email-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-15scsi: ufs: pass device information to apply_dev_quirksStanley Chu
Pass UFS device information to vendor-specific variant callback "apply_dev_quirks" because some platform vendors need to know such information to apply special handling or quirks in specific devices. At the same time, modify existing vendor implementations according to the new interface for those vendor drivers which will be built-in or built as a module alone with UFS core driver. [mkp: clarified commit desc] Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Asutosh Das <asutoshd@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/1578726707-6596-2-git-send-email-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-15scsi: BusLogic: use %lX for unsigned long rather than %XColin Ian King
Currently the incorrect %X print format specifier is being used for several unsigned longs. Fix these by using %lX instead. Also join up some literal strings that are split. Link: https://lore.kernel.org/r/20200108193800.96706-1-colin.king@canonical.com Addresses-Coverity: ("Invalid type in argument to printf format specifier") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Khalid Aziz <khalid@gonehiking.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-15scsi: ufs: remove "errors" word in ufshcd_print_err_hist()Stanley Chu
Remove "errors" word in output string by ufshcd_print_err_hist() since not all printed targets are "errors". Sometimes they are just "events". In addition, all events which can be treated as "errors" already have "err" or "fail" words in their names. Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Asutosh Das <asutoshd@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/1578147968-30938-4-git-send-email-stanley.chu@mediatek.com Reviewed-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-15scsi: ufs: add device reset history for vendor implementationsStanley Chu
Device reset history shall be also added for vendor's device reset variant operation implementation. Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Asutosh Das <asutoshd@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/1578147968-30938-3-git-send-email-stanley.chu@mediatek.com Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-15scsi: ufs: fix empty check of error historyStanley Chu
Currently checking if an error history element is empty or not is by its "value". In most cases, value is error code. However this checking is not correct because some errors or events do not specify any values in error history so values remain as 0, and this will lead to incorrect empty checking. Fix it by checking "timestamp" instead of "value" because timestamp will be always assigned for all history elements Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Asutosh Das <asutoshd@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/1578147968-30938-2-git-send-email-stanley.chu@mediatek.com Reviewed-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-14Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two simple fixes in the upper drivers (so both fairly core), one in enclosures, which fixes replugging a device into an enclosure slot and one in the disk driver which fixes revalidating a drive with protection information (PI) to make it a non-PI drive ... previously we were still remembering the old PI state. Both fixed issues are quite rare in the field" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: enclosure: Fix stale device oops with hot replug scsi: sd: Clear sdkp->protection_type if disk is reformatted without PI
2020-01-10scsi: sd: Clear sdkp->protection_type if disk is reformatted without PIXiang Chen
If an attached disk with protection information enabled is reformatted to Type 0 the revalidation code does not clear the original protection type and subsequent accesses will keep setting RDPROTECT/WRPROTECT. Set the protection type to 0 if the disk reports PROT_EN=0 in READ CAPACITY(16). [mkp: commit desc] Fixes: fe542396da73 ("[SCSI] sd: Ensure we correctly disable devices with unknown protection type") Link: https://lore.kernel.org/r/1578532344-101668-1-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-10scsi: lpfc: Make lpfc_defer_acc_rsp staticYueHaibing
Fix sparse warning: drivers/scsi/lpfc/lpfc_nportdisc.c:344:1: warning: symbol 'lpfc_defer_acc_rsp' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200107014956.41748-1-yuehaibing@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-10Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queueMartin K. Petersen
Pull compat_ioctl cleanup from Arnd. Here's his description: This series concludes the work I did for linux-5.5 on the compat_ioctl() cleanup, killing off fs/compat_ioctl.c and block/compat_ioctl.c by moving everything into drivers. Overall this would be a reduction both in complexity and line count, but as I'm also adding documentation the overall number of lines increases in the end. My plan was originally to keep the SCSI and block parts separate. This did not work easily because of interdependencies: I cannot do the final SCSI cleanup in a good way without first addressing the CDROM ioctls, so this is one series that I hope could be merged through either the block or the scsi git trees, or possibly both if you can pull in the same branch. The series comes in these steps: 1. clean up the sg v3 interface as suggested by Linus. I have talked about this with Doug Gilbert as well, and he would rebase his sg v4 patches on top of "compat: scsi: sg: fix v3 compat read/write interface" 2. Actually moving handlers out of block/compat_ioctl.c and block/scsi_ioctl.c into drivers, mixed in with cleanup patches 3. Document how to do this right. I keep getting asked about this, and it helps to point to some documentation file. The branch is based on another one that fixes a couple of bugs found during the creation of this series. Changes since v3: https://lore.kernel.org/lkml/20200102145552.1853992-1-arnd@arndb.de/ - Move sr_compat_ioctl fixup to correct patch (Ben Hutchings) - Add Reviewed-by tags Changes since v2: https://lore.kernel.org/lkml/20191217221708.3730997-1-arnd@arndb.de/ - Rebase to v5.5-rc4, which contains the earlier bugfixes - Fix sr_block_compat_ioctl() error handling bug found by Ben Hutchings - Fix idecd_locked_compat_ioctl() compat_ptr() bug - Don't try to handle HDIO_DRIVE_TASKFILE in drivers/ide - More documentation improvements Changes since v1: https://lore.kernel.org/lkml/20191211204306.1207817-1-arnd@arndb.de/ - move out the bugfixes into a branch for itself - clean up scsi sg driver further as suggested by Christoph Hellwig - avoid some ifdefs by moving compat_ptr() out of asm/compat.h - split out the blkdev_compat_ptr_ioctl function; bug spotted by Ben Hutchings - Improve formatting of documentation Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-06block: Allow t10-pi to be modularHerbert Xu
Currently t10-pi can only be built into the block layer which via crc-t10dif pulls in a whole chunk of the Crypto API. In fact all users of t10-pi work as modules and there is no reason for it to always be built-in. This patch adds a new hidden option for t10-pi that is selected automatically based on BLK_DEV_INTEGRITY and whether the users of t10-pi are built-in or not. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-01-03compat_ioctl: scsi: handle HDIO commands from driversArnd Bergmann
The ata_sas_scsi_ioctl() function implements a number of HDIO_* commands for SCSI devices, it is used by all libata drivers as well as a few drivers that support SAS attached SATA drives. The only command that is not safe for compat ioctls here is HDIO_GET_32BIT. Change the implementation to check for in_compat_syscall() in order to do both cases correctly, and change all callers to use it as both native and compat callback pointers, including the indirect callers through sas_ioctl and ata_scsi_ioctl. Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-01-03compat_ioctl: move cdrom commands into cdrom.cArnd Bergmann
There is no need for the special cases for the cdrom ioctls any more now, so make sure that each cdrom driver has a .compat_ioctl() callback and calls cdrom_compat_ioctl() directly there. Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-01-03compat_ioctl: scsi: move ioctl handling into driversArnd Bergmann
Each driver calling scsi_ioctl() gets an equivalent compat_ioctl() handler that implements the same commands by calling scsi_compat_ioctl(). The scsi_cmd_ioctl() and scsi_cmd_blk_ioctl() functions are compatible at this point, so any driver that calls those can do so for both native and compat mode, with the argument passed through compat_ptr(). With this, we can remove the entries from fs/compat_ioctl.c. The new code is larger, but should be easier to maintain and keep updated with newly added commands. Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-01-03compat_ioctl: add scsi_compat_ioctlArnd Bergmann
In order to move the compat handling for SCSI ioctl commands out of fs/compat_ioctl.c into the individual drivers, we need a helper function first to match the native ioctl handler called by sd, sr, st, etc. Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-01-03compat: scsi: sg: fix v3 compat read/write interfaceArnd Bergmann
In the v5.4 merge window, a cleanup patch from Al Viro conflicted with my rework of the compat handling for sg.c read(). Linus Torvalds did a correct merge but pointed out that the resulting code is still unsatisfactory. I later noticed that the sg_new_read() function still gets the compat mode wrong, when the 'count' argument is large enough to pass a compat_sg_io_hdr object, but not a nativ sg_io_hdr. To address both of these, move the definition of compat_sg_io_hdr into a scsi/sg.h to make it visible to sg.c and rewrite the logic for reading req_pack_id as well as the size check to a simpler version that gets the expected results. Fixes: c35a5cfb4150 ("scsi: sg: sg_read(): simplify reading ->pack_id of userland sg_io_hdr_t") Fixes: 98aaaec4a150 ("compat_ioctl: reimplement SG_IO handling") Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-01-02scsi: mpt3sas: Update drive version to 33.100.00.00Sreekanth Reddy
Update mpt3sas driver version from 32.100.00.00 to 33.100.00.00 Link: https://lore.kernel.org/r/20191226111333.26131-11-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: mpt3sas: Remove usage of device_busy counterSreekanth Reddy
Remove usage of device_busy counter from driver. Instead of device_busy counter now driver uses 'nr_active' counter of request_queue to get the number of inflight request for a LUN. Link: https://lore.kernel.org/r/20191226111333.26131-10-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: mpt3sas: Print function name in which cmd timed outSreekanth Reddy
Print the function name in which MPT command got timed out. This will facilitate debugging in which path corresponding MPT command got timeout in first failure instance of log itself. Link: https://lore.kernel.org/r/20191226111333.26131-9-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: mpt3sas: Optimize mpt3sas driver loggingSreekanth Reddy
This improves mpt3sas driver default debug information collection and allows for a higher percentage of issues being able to be resolved with a first-time data capture. However, this improvement to balance the amount of debug data captured with the performance of driver. Enabled below print messages with out affecting the IO performance, 1. When task abort TM is received then print IO commands's timeout value and how much time this command has been outstanding. 2. Whenever hard reset occurs then print from where this hard reset has been issued. 3. Failure message should be displayed for failure scenarios without any logging level. 4. Added a print after driver successfully register or unregistered a target drive with the SML. This print will be useful for debugging the issue where the drive addition or deletion is hanging at SML. 5. During driver load time print request, reply, sense and config page pool's information such as its address, length and size. Also printed sg_tablesize information. Link: https://lore.kernel.org/r/20191226111333.26131-8-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: mpt3sas: print in which path firmware fault occurredSreekanth Reddy
When Firmware fault occurs then print in which path firmware fault has occurred. This will be useful while debugging the firmware fault issues. Link: https://lore.kernel.org/r/20191226111333.26131-7-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: mpt3sas: Handle CoreDump state from watchdog threadSreekanth Reddy
Watchdog thread polls for IOC state every 1 second. If it detects that IOC state is in CoreDump state then it immediately stops the IOs and also clears the outstanding commands issued to the HBA firmware and then it will poll for IOC state to be out of CoreDump state and once it detects that IOC state is changed from CoreDump state to Fault state (or) CoreDumpTOSec number of seconds are elapsed then it will issue host reset operation and moves the IOC state to Operational state and resumes the IOs. Whenever any TM is received from SML then if driver detects the IOC state is in CoreDump state then it will wait for CoreDump state to be cleared and will host reset operation. Link: https://lore.kernel.org/r/20191226111333.26131-6-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: mpt3sas: Add support IOCs new state named COREDUMPSreekanth Reddy
New feature is added in HBA firmware where it copies the collected firmware logs in flash region named 'CoreDump' whenever HBA firmware faults occur. For copying the logs to CoreDump flash region firmware needs some time and hence it has introduced a new IOC state named "CoreDump" State. Whenever driver detects the CoreDump state then it means that some firmware fault has occurred and firmware is copying the logs to the coredump flash region. During this time driver should not perform any operation with the HBA, driver should wait for HBA firmware to move the IOC state from 'CoreDump' state to 'Fault' state once it's done with copying the logs to coredump region. Once driver detects the Fault state then it will issue the diag reset/host reset operation to move the IOC state from Fault to Operational state. Here the valid IOC state transactions w.r.t to this CoreDump state feature, Operational -> Fault: The IOC transitions to the Fault state when an operational error occurs AND CoreDump is not supported (or disabled) by the firmware(FW). Operational -> CoreDump: The IOC transitions to the CoreDump state when an operational error occurs AND CoreDump is supported & enabled by the FW. CoreDump -> Fault: A transition from CoreDump state to Fault state happens when the FW completes the CoreDump collection. CoreDump -> Reset: A transition out of the CoreDump state happens when the host sets the Reset Adapter bit in the System Diagnostic Register (Hard Reset). This reset action indicates that CoreDump took longer than the host time out. Firmware informs the driver about the maximum time that driver has to wait for firmware to transition the IOC state from 'CoreDump' to 'FAULT' state through 'CoreDumpTOSec' field of ManufacturingPage11 page. if this 'CoreDumpTOSec' field value is zero then driver will wait for max 15 seconds. Driver informs the HBA firmware that it supports this new IOC state named 'CoreDump' state by enabling COREDUMP_ENABLE flag in ConfigurationFlags field of ioc init request message. Current patch handles the CoreDump state only during HBA initialization and release scenarios where watchdog thread (which polls the IOC state in every one second) is disabled. Next subsequent patch handle the CoreDump state when watchdog thread is enabled. During HBA initialization or release execution time if driver detects the CoreDump state then driver will wait for maximum CoreDumpTOSec value seconds for FW to copy the logs. After that it will issue the diag reset operation to move the IOC state to Operational state. Link: https://lore.kernel.org/r/20191226111333.26131-5-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: mpt3sas: renamed _base_after_reset_handler functionSreekanth Reddy
Renamed _base_after_reset_handler function to _base_clear_outstanding_commands so that it can be used in multiple scenarios with suitable name which matches with the operation it does. Also renamed its child functions. No functional changes. Link: https://lore.kernel.org/r/20191226111333.26131-4-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: mpt3sas: Add support for NVMe shutdownSreekanth Reddy
Introduce function _scsih_nvme_shutdown() to issue IO Unit Control message to IOC firmware with operation code 'shutdown'. This causes IOC firmware to issue NVMe shutdown commands to all NVMe drives attached to it. NVMe Shutdown: NVMe devices need to have a specific shutdown sequence performed before power is removed. For this, the IOC firmware needs to be notified when the system is being shutdown. So during the system shutdown time, driver issues an IO Unit Control request with operation code MPI26_CTRL_OP_SHUTDOWN to inform firmware that a shutdown is initiated. This shutdown command is issued only if NVMe devices are attached to the controller. During each NVMe device addition, driver reads pcie device page2 to get shutdown latency (e.g. drive's RTD3 Entry Latency) and updates the max latency value among the added NVMe drives in ioc->max_shutdown_latency. This is used as the timeout value for IO Unit Control command at the time of shutdown. When a NVMe drive is removed and its shutdown latency matches which ioc->max_shutdown_latency then ioc->max_shutdown_latency is updated to next max value (by iterating over the list of available devices). If the shutdown latency is 0, then default timeout is set to six seconds. Link: https://lore.kernel.org/r/20191226111333.26131-3-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: mpt3sas: Update MPI Headers to v02.00.57Sreekanth Reddy
Update MPI Headers to version 02.00.57. Link: https://lore.kernel.org/r/20191226111333.26131-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: ufs-mediatek: configure and enable clk-gatingStanley Chu
Enable clk-gating with customized delayed timer value in MediaTek Chipsets. Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/1577683950-1702-7-git-send-email-stanley.chu@mediatek.com Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: ufs-mediatek: configure customized auto-hibern8 timerStanley Chu
Configure customized auto-hibern8 timer in MediaTek Chipsets. Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/1577683950-1702-6-git-send-email-stanley.chu@mediatek.com Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: ufs: export ufshcd_auto_hibern8_update for vendor usageStanley Chu
Export ufshcd_auto_hibern8_update to allow vendors to use common interface to customize auto-hibernate timer. Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/1577683950-1702-5-git-send-email-stanley.chu@mediatek.com Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: ufs-mediatek: introduce reference clock controlStanley Chu
Introduce reference clock control in MediaTek Chipset in order to disable it if it is not necessary by UFS device to save system power. Currently reference clock can be disabled during system suspend, runtime suspend and clock-gating after link enters hibernate state. Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/1577683950-1702-4-git-send-email-stanley.chu@mediatek.com Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: ufs-mediatek: add device reset implementationStanley Chu
Add device reset vops implementation in MediaTek UFS driver. Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/1577683950-1702-3-git-send-email-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: ufs: sysfs: Use the correct style for SPDX License IdentifierNishad Kamdar
This patch corrects the SPDX License Identifier style in header file related to UFS Host Controller. It assigns explicit block comment to the SPDX License Identifier. Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Link: https://lore.kernel.org/r/5ca6287665fe52d8f40062e0eab8561d2b7a5b40.1577511720.git.nishadkamdar@gmail.com Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: mylex: Use the correct style for SPDX License IdentifierNishad Kamdar
This patch corrects the SPDX License Identifier style in header files related to Mylex DAC960/DAC1100 PCI RAID Controllers. It assigns explicit block comment to the SPDX License Identifier. Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Link: https://lore.kernel.org/r/88332ad390f985bdebb9f2adaf2d499b0a639753.1577511720.git.nishadkamdar@gmail.com Suggested-by: Joe Perches <joe@perches.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: ufs: Remove the SCSI timeout handlerBart Van Assche
The UFS SCSI timeout handler was needed to compensate that ufshcd_queuecommand() could return SCSI_MLQUEUE_HOST_BUSY for a long time. Commit a276c19e3e98 ("scsi: ufs: Avoid busy-waiting by eliminating tag conflicts") fixed this so the timeout handler is no longer necessary. See also commit f550c65b543b ("scsi: ufs: implement scsi host timeout handler"). Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191224220248.30138-7-bvanassche@acm.org Reviewed-by: Can Guo <cang@codeaurora.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: ufs: Fix a race condition in the tracing codeBart Van Assche
Starting execution of a command before tracing a command may cause the completion handler to free data while it is being traced. Fix this race by tracing a command before it is submitted. Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191224220248.30138-5-bvanassche@acm.org Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: ufs: Make ufshcd_prepare_utp_scsi_cmd_upiu() easier to readBart Van Assche
Since the lrbp->cmd expression occurs multiple times, introduce a new local variable to hold that pointer. This patch does not change any functionality. Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191224220248.30138-4-bvanassche@acm.org Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: ufs: Make ufshcd_add_command_trace() easier to readBart Van Assche
Since the lrbp->cmd expression occurs multiple times, introduce a new local variable to hold that pointer. This patch does not change any functionality. Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191224220248.30138-3-bvanassche@acm.org Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Can Guo <cang@codeaurora.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: ufs: Fix indentation in ufshcd_query_attr_retry()Bart Van Assche
Remove a space that occurs after a tab. Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191224220248.30138-2-bvanassche@acm.org Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Can Guo <cang@codeaurora.org> Reviewed-by: Alim Akhar <alim.akhtar@samsung.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: ufs: use ufshcd_vops_dbg_register_dump for vendor specific dumpsStanley Chu
We already have ufshcd_vops_dbg_register_dump() thus all "hba->vops->dbg_register_dump" references can be replaced by it. Link: https://lore.kernel.org/r/1577192466-20762-3-git-send-email-stanley.chu@mediatek.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Can Guo <cang@codeaurora.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: ufs: unify scsi_block_requests usageStanley Chu
Currently UFS driver has ufshcd_scsi_block_requests() with reference counter mechanism to avoid possible racing of blocking and unblocking requests flow. Unify all users in UFS driver to use the same function. Link: https://lore.kernel.org/r/1577192466-20762-2-git-send-email-stanley.chu@mediatek.com Reviewed-by: Can Guo <cang@codeaurora.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: sd_zbc: Rename sd_zbc_check_zones()Damien Le Moal
Now that the block layer implement zone checks on revalidate, sd_zbc_check_zones() is reduced getting the zone size and verifying the device capacity for device with RC_BASIS=0. Be clear about this by renaming sd_zbc_check_zones() to sd_zbc_check_capacity() and updating the function description and comments. Link: https://lore.kernel.org/r/20191220075823.400072-3-damien.lemoal@wdc.com Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: sd_zbc: Simplify sd_zbc_check_zones()Damien Le Moal
Now that the block layer generic zone revalidation code in blk_revalidate_disk_zones() checks for power of 2 zone size, there is no need to do it in sd_zbc_check_zones(). Remove this check. Link: https://lore.kernel.org/r/20191220075823.400072-2-damien.lemoal@wdc.com Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: qla2xxx: Use get_unaligned_*() instead of open-coding these functionsBart Van Assche
This patch improves readability and does not change any functionality. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Link: https://lore.kernel.org/r/20191219005050.40193-1-bvanassche@acm.org Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: qla2xxx: Fix the endianness of the qla82xx_get_fw_size() return typeBart Van Assche
Since qla82xx_get_fw_size() returns a number in CPU-endian format, change its return type from __le32 into u32. This patch does not change any functionality. Fixes: 9c2b297572bf ("[SCSI] qla2xxx: Support for loading Unified ROM Image (URI) format firmware file.") Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Link: https://lore.kernel.org/r/20191219004905.39586-1-bvanassche@acm.org Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 10:52:39 +0000