summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2021-04-06Buslogic: remove ISA supportChristoph Hellwig
The ISA support in Buslogic has been broken for a long time, as all the I/O path expects a struct device for DMA mapping that is derived from the PCI device, which would simply crash for ISA adapters. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Khalid Aziz <khalid@gonehiking.org> Link: https://lore.kernel.org/r/20210331073001.46776-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-06aha1542: use a local bounce bufferChristoph Hellwig
To remove the last user of the unchecked_isa_dma flag and thus the block layer ISA bounce buffering switch this driver to use its own local bounce buffer. This has the effect of not needing the chain indirection and supporting and unlimited number of segments. It does however limit the transfer size for each command to something that can be reasonable allocated by dma_alloc_coherent like 8K. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20210331073001.46776-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-06scsi: libsas: Clean up whitespaceLuo Jiaxing
checkpatch reported several whitespace errors. Fix them all. Link: https://lore.kernel.org/r/1616675396-6108-3-git-send-email-luojiaxing@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: libsas: Correctly indent statements in sas_to_ata_err()Luo Jiaxing
checkpatch reported an error in sas_to_ata_err(). switch and case statements are incorrectly indented. Link: https://lore.kernel.org/r/1616675396-6108-2-git-send-email-luojiaxing@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: qedf: Remove unused include of linux/version.hTian Tao
Remove unnecessary include of linux/version.h. Link: https://lore.kernel.org/r/1617283618-19346-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: bfa: Remove unnecessary struct declarationsWan Jiabing
struct bfa_fcs_s is declared twice. First is declared at line 50, remove the duplicate. struct bfa_fcs_fabric_s is defined at line 175, remove unnecessary declaration. Link: https://lore.kernel.org/r/20210401063535.992487-1-wanjiabing@vivo.com Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: ufs: core: Fix out-of-bounds warnings in ufshcd_exec_raw_upiu_cmd()Gustavo A. R. Silva
Fix the following out-of-bounds warnings by enclosing some structure members into new structure objects upiu_req and upiu_rsp: include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset [29, 48] from the object at 'treq' is out of the bounds of referenced subobject 'req_header' with type 'struct utp_upiu_header' at offset 16 [-Warray-bounds] include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset [61, 80] from the object at 'treq' is out of the bounds of referenced subobject 'rsp_header' with type 'struct utp_upiu_header' at offset 48 [-Warray-bounds] arch/m68k/include/asm/string.h:72:25: warning: '__builtin_memcpy' offset [29, 48] from the object at 'treq' is out of the bounds of referenced subobject 'req_header' with type 'struct utp_upiu_header' at offset 16 [-Warray-bounds] arch/m68k/include/asm/string.h:72:25: warning: '__builtin_memcpy' offset [61, 80] from the object at 'treq' is out of the bounds of referenced subobject 'rsp_header' with type 'struct utp_upiu_header' at offset 48 [-Warray-bounds] Refactor the code by making it more structured. The problem is that the original code is trying to copy data into a bunch of struct members adjacent to each other in a single call to memcpy(). Now that a new struct _upiu_req_ enclosing all those adjacent members is introduced, memcpy() doesn't overrun the length of &treq.req_header, because the address of the new struct object _upiu_req_ is used as the destination, instead. The same problem is present when memcpy() overruns the length of the source &treq.rsp_header; in this case the address of the new struct object _upiu_rsp_ is used, instead. Also, this helps with the ongoing efforts to enable -Warray-bounds and avoid confusing the compiler. Link: https://github.com/KSPP/linux/issues/109 Link: https://lore.kernel.org/lkml/60640558.lsAxiK6otPwTo9rv%25lkp@intel.com/ Link: https://lore.kernel.org/r/20210331224338.GA347171@embeddedor Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Build-tested-by: kernel test robot <lkp@intel.com>
2021-04-05scsi: fnic: Remove unnecessary spin_lock_init() and INIT_LIST_HEAD()Yang Yingliang
The spinlock and list head of fnic_list are initialized statically. It is unnecessary to initialize them. Link: https://lore.kernel.org/r/20210330125911.1050879-1-yangyingliang@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: mpt3sas: Block PCI config access from userspace during resetSreekanth Reddy
While diag reset is in progress there is short duration where all access to controller's PCI config space from the host needs to be blocked. This is due to a hardware limitation of the IOC controllers. Block all access to controller's config space from userland applications by calling pci_cfg_access_lock() while diag reset is in progress and unlocking it again after the controller comes back to ready state. Link: https://lore.kernel.org/r/20210330105137.20728-1-sreekanth.reddy@broadcom.com Cc: stable@vger.kernel.org #v5.4.108+ Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: mpt3sas: Fix endianness for ActiveCablePowerRequirementSreekanth Reddy
Covert ActiveCablePowerRequirement's value to target CPU endian before displaying it. Link: https://lore.kernel.org/r/20210330105106.20569-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: mpt3sas: Only one vSES is present even when IOC has multi vSESSreekanth Reddy
Whenever the driver is adding a vSES to virtual-phys list it is reinitializing the list head. Hence those vSES devices which were added previously are lost. Stop reinitializing the list every time a new vSES device is added. Link: https://lore.kernel.org/r/20210330105004.20413-1-sreekanth.reddy@broadcom.com Cc: stable@vger.kernel.org #v5.11.10+ Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: scsi_dh_alua: Remove check for ASC 24h in alua_rtpg()Ewan D. Milne
Some arrays return ILLEGAL_REQUEST with ASC 00h if they don't support the RTPG extended header so remove the check for INVALID FIELD IN CDB. Link: https://lore.kernel.org/r/20210331201154.20348-1-emilne@redhat.com Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: scsi_dh_alua: Prevent duplicate pg info print in alua_rtpg()John Pittman
Due to the frequency that alua_rtpg() is called, the path group info print within can print the same info multiple times in the logs, subsequent prints adding no new information or value. To reproduce: # modprobe scsi_debug vpd_use_hostno=0 # systemctl start multipathd.service To fix, check stored values, only printing at alua attach/activate and if any of the values change. Link: https://lore.kernel.org/r/20210331181656.5046-1-jpittman@redhat.com Reviewed-by: David Jeffery <djeffery@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: John Pittman <jpittman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: scsi_transport_srp: Don't block target in SRP_PORT_LOST stateMartin Wilck
rport_dev_loss_timedout() sets the rport state to SRP_PORT_LOST and the SCSI target state to SDEV_TRANSPORT_OFFLINE. If this races with srp_reconnect_work(), a warning is printed: Mar 27 18:48:07 ictm1604s01h4 kernel: dev_loss_tmo expired for SRP port-18:1 / host18. Mar 27 18:48:07 ictm1604s01h4 kernel: ------------[ cut here ]------------ Mar 27 18:48:07 ictm1604s01h4 kernel: scsi_internal_device_block(18:0:0:100) failed: ret = -22 Mar 27 18:48:07 ictm1604s01h4 kernel: Call Trace: Mar 27 18:48:07 ictm1604s01h4 kernel: ? scsi_target_unblock+0x50/0x50 [scsi_mod] Mar 27 18:48:07 ictm1604s01h4 kernel: starget_for_each_device+0x80/0xb0 [scsi_mod] Mar 27 18:48:07 ictm1604s01h4 kernel: target_block+0x24/0x30 [scsi_mod] Mar 27 18:48:07 ictm1604s01h4 kernel: device_for_each_child+0x57/0x90 Mar 27 18:48:07 ictm1604s01h4 kernel: srp_reconnect_rport+0xe4/0x230 [scsi_transport_srp] Mar 27 18:48:07 ictm1604s01h4 kernel: srp_reconnect_work+0x40/0xc0 [scsi_transport_srp] Avoid this by not trying to block targets for rports in SRP_PORT_LOST state. Link: https://lore.kernel.org/r/20210401091105.8046-1-mwilck@suse.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: pm80xx: Fix chip initialization failureViswas G
Inbound and outbound queues were not properly configured and that lead to MPI configuration failure. Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues") Cc: stable@vger.kernel.org # 5.10+ Link: https://lore.kernel.org/r/20210402054212.17834-1-Viswas.G@microchip.com.com Reported-and-tested-by: Ash Izat <ash@ai0.uk> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Update version to 2.1.8-045Don Brace
Update version. Link: https://lore.kernel.org/r/161549387469.25025.12859568843576080076.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Gerry Morong <gerry.morong@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Add new PCI IDsKevin Barnett
Add support for newer hardware. Link: https://lore.kernel.org/r/161549386882.25025.2594251735886014958.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Acked-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Correct system hangs when resuming from hibernationKevin Barnett
Correct system hangs when resuming from hibernation after first successful hibernation/resume cycle. Rare condition involving OFA. Note: Suspend/resume is not supported on many platforms. It was originally intended for workstations. Link: https://lore.kernel.org/r/161549386295.25025.14555840632114761610.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Update enclosure identifier in sysfsMurthy Bhat
Update enclosure identifier field corresponding to physical devices in lsscsi/sysfs. During device add the SCSI devtype is filled in during slave_configure(). However, when pqi_scsi_update_device() runs (REGNEWD) the firmware returns zero for the SCSI devtype field, and valid devtype is overwritten by zero. Due to this, lsscsi output shows wrong values. Link: https://lore.kernel.org/r/161549385708.25025.17234953506918043750.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Add additional logging for LUN resetsKevin Barnett
LUN resets can take longer to complete. Adding in more driver logging helps show where the driver is in the reset process. Add a timeout in pqi_device_wait_for_pending_io() to cap how long the driver will wait for outstanding commands. Link: https://lore.kernel.org/r/161549385119.25025.10366493975709358647.stgit@brunhilda Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Update SAS initiator_port_protocols and target_port_protocolsMurthy Bhat
Export valid sas initiator_port_protocols and target_port_protocols to sysfs. Needed for lsscsi to show correct values. Link: https://lore.kernel.org/r/161549384532.25025.1469409935400845385.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Add phy ID support for the physical drivesMurthy Bhat
Display topology using PHY numbers. PHY (both local and remote) numbers corresponding to physical drives are read from BMIC_IDENTIFY_PHYSICAL_DEVICE. Link: https://lore.kernel.org/r/161549383947.25025.16977895345376485056.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Convert snprintf() to scnprintf()Kevin Barnett
The entire Linux kernel has been slowly migrating from snprintf() to scnprintf(), so we are doing our part. This article explains the rationale for this change: https: //lwn.net/Articles/69419/ Link: https://lore.kernel.org/r/161549383357.25025.12363435617789964291.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Fix driver synchronization issuesKevin Barnett
- Synchronize OFA and controller offline events. Prevent I/O during the above conditions. - Cleanup pqi_device_wait_for_pending_io() by checking the device->scsi_cmds_outstanding instead of walking the device's list of commands. - Stop failing all I/O for all devices. This was causing OS to retry them, delaying OFA. - Clean up cache flush. The controller is checked for offline status in lower level functions. Link: https://lore.kernel.org/r/161549382770.25025.789855864026860170.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Update device scan operationsKevin Barnett
Change return type from EINPROGRESS to EBUSY to signal applications to retry a REGNEWD if the driver cannot process the REGNEWD. Events such as OFA, suspend, and shutdown return EINPROGRESS if a scan is currently running. This prevents applications from immediately retrying REGNEWD. Schedule a new REGNEWD if system low on memory. Link: https://lore.kernel.org/r/161549382157.25025.16054784597622125373.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Update OFA managementKevin Barnett
OFA, Online Firmware Activation, allows users to update firmware without a reboot. - Change OFA setup to a worker thread - Delay soft resets - Add OFA event handler to allow FW to initiate OFA - Add in-memory allocation to OFA events - Update OFA buffer size calculations - Add ability to cancel OFA events - Update OFA quiesce/un-quiesce - Prevent Kernel crashes while issuing ioctl during OFA - Returned EBUSY for pass-through IOCTLs throughout all stages of OFA - Add mutex to prevent parallel OFA updates. Link: https://lore.kernel.org/r/161549381563.25025.2647205502550052197.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Update RAID bypass handlingKevin Barnett
Simplify AIO retry management by removing retry list and list management. Need to retry is already set in the response status. Also remove the bypass worker thread. Accelerated I/O requests bypass the RAID engine and go directly to either an HBA disk or to a physical component of a RAID volume. Link: https://lore.kernel.org/r/161549380976.25025.11776487034357231156.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Update suspend/resume and shutdownKevin Barnett
For suspend/resume and shutdown prevent: Controller events, any new I/O requests, controller requests, REGNEWD, and reset operations. Wait for any pending completions from the controller to complete to avoid controller NMI events. Link: https://lore.kernel.org/r/161549380398.25025.12266769502766103580.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Synchronize device resets with mutexKevin Barnett
Remove some flags used to check for device resets already in progress. Allow only 1 reset operation at a time for the host. Link: https://lore.kernel.org/r/161549379810.25025.10194117431886743795.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Update soft reset management for OFAKevin Barnett
Cleanup soft reset code for Online Firmware Activation (OFA). OFA allows controller firmware updates without a reboot. OFA updates require an on-line controller reset to activate the updated firmware. There were some missing actions for some of the reset cases. The controller is first set back to sis mode before returning to pqi mode. Check to ensure the controller is in sis mode. Release QRM memory (OFA buffer) on OFA error conditions. Clean up controller state which can cause a kernel panic upon reboot after an unsuccessful OFA. Link: https://lore.kernel.org/r/161549379215.25025.10654441314249183621.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Update event handlerKevin Barnett
Change the data types for event_id and additional_event_id. Link: https://lore.kernel.org/r/161549378628.25025.14338046567871170916.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Add support for wwidKevin Barnett
WWID has been added to Report Physical LUNs in newer controller firmware. The presence of this field is detected by a feature bit. Add detection of this new feature and store the WWID when set. Link: https://lore.kernel.org/r/161549378041.25025.3869709982357729841.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Remove timeouts from internal cmdsKevin Barnett
Remove timeouts for driver-initiated commands. Responses to internal requests can take longer than hard coded timeout values and the driver will still have an outstanding request that may complete in the future with no context. Link: https://lore.kernel.org/r/161549377451.25025.12306492868851801623.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Disable WRITE SAME for HBA NVMe disksKevin Barnett
Controller does not support SCSI WRITE SAME for NVMe drives in HBA mode Link: https://lore.kernel.org/r/161549376866.25025.5961694654342018260.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Add host level stream detection enableDon Brace
Allow R5/R6 stream detection to be disabled/enabled using sysfs entry enable_stream_detection. Example usage: lsscsi [2:2:0:0] storage Adaptec 3258P-32i /e 0010 ^ | +---- NOTE: here host is host2 find /sys -name \*enable_stream\* /sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection /sys/devices/pci0000:5b/0000:5b:00.0/0000:5c:00.0/host3/scsi_host/host3/enable_stream_detection Current stream detection: cat /sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection 1 Turn off stream detection: echo 0 > /sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection Turn on stream detection: echo 1 > /sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection Link: https://lore.kernel.org/r/161549376281.25025.1132304698441513738.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Add stream detectionDon Brace
Enhance performance by adding sequential stream detection for RAID5/RAID6 sequential write requests. Reduce stripe lock contention with full-stripe write operations. There is one common stripe lock for each RAID volume that can be set by either the RAID engine or the AIO engine. The AIO path has I/O request sizes well below the stripe size resulting in many Read-Modify-Write operations. Sending the request to the RAID engine allows for coalescing requests into full stripe operations resulting in reduced Read-Modify-Write operations. Link: https://lore.kernel.org/r/161549375693.25025.2962141451773219796.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Align code with oob driverKevin Barnett
Reduce differences between out-of-box driver and kernel.org driver. No functional changes. Link: https://lore.kernel.org/r/161549375094.25025.9268879575316758510.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Add support for long firmware versionKevin Barnett
Add support for new "long" firmware version which requires minor driver changes to expose. Link: https://lore.kernel.org/r/161549374508.25025.15467221395888158022.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Add support for BMIC sense feature cmd and feature bitsKevin Barnett
Determine support for supported features from BMIC sense feature command instead of config table. Enable features such as: RAID 1/5/6 write support, SATA wwid, and encryption. Link: https://lore.kernel.org/r/161549373914.25025.7999816178098103135.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Add support for RAID1 writesDon Brace
Add RAID1 write IU and implement RAID1 write support. Change brand names ADM/ADG to TRIPLE/RAID-6. Link: https://lore.kernel.org/r/161549373324.25025.2441592111049564780.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Add support for RAID5 and RAID6 writesDon Brace
Add in new IU definition and implement support for RAID5 and RAID6 writes. Link: https://lore.kernel.org/r/161549372734.25025.963261942897080281.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Refactor scatterlist codeDon Brace
Factor out code common to all scatter-gather list building to prepare for new AIO functionality. AIO (Accelerated I/O) requests go directly to disk No functional changes. Link: https://lore.kernel.org/r/161549372147.25025.9706613054649682229.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Refactor aio submission codeDon Brace
Refactor aio submission code: 1. Break up function pqi_raid_bypass_submit_scsi_cmd() into smaller functions. 2. Add common block (rmd - raid_map_data) to carry around into newly added functions. 3. Prepare for new AIO functionality. No functional changes. Link: https://lore.kernel.org/r/161549371553.25025.8840958689316611074.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Add support for new product idsKevin Barnett
Add support for newer hardware by adding in a product identifier. This identifier can then be used to check for the hardware generation. Link: https://lore.kernel.org/r/161549370966.25025.2968242206975557607.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Correct request leakage during reset operationsMurthy Bhat
While failing queued I/Os in TMF path, there was a request leak and hence stale entries in request pool with ref count being non-zero. In shutdown path we have a BUG_ON to catch stuck I/O either in firmware or in the driver. The stale requests caused a system crash. The I/O request pool leakage also lead to a significant performance drop. Link: https://lore.kernel.org/r/161549370379.25025.12793264112620796062.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Use host-wide tag spaceDon Brace
Correct SCSI midlayer sending more requests than exposed host queue depth causing firmware ASSERT and lockup issues by enabling host-wide tags. Note: This also results in better performance. Link: https://lore.kernel.org/r/161549369787.25025.8975999483518581619.stgit@brunhilda Suggested-by: Ming Lei <ming.lei@redhat.com> Suggested-by: John Garry <john.garry@huawei.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05Merge branch '5.12/scsi-fixes' into 5.13/scsi-stagingMartin K. Petersen
Pull 5.12/scsi-fixes into the 5.13 SCSI tree to provide a baseline for some UFS changes that would otherwise cause conflicts during the merge. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-03Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "A single fix to iscsi for a rare race condition which can cause a kernel panic" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: iscsi: Fix race condition between login and sync thread
2021-04-01scsi: ufs: core: Fix wrong Task Tag used in task management request UPIUsCan Guo
In __ufshcd_issue_tm_cmd(), it is not correct to use hba->nutrs + req->tag as the Task Tag in a TMR UPIU. Directly use req->tag as the Task Tag. Fixes: e293313262d3 ("scsi: ufs: Fix broken task management command implementation") Link: https://lore.kernel.org/r/1617262750-4864-3-git-send-email-cang@codeaurora.org Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-01scsi: ufs: core: Fix task management request completion timeoutCan Guo
ufshcd_tmc_handler() calls blk_mq_tagset_busy_iter(fn = ufshcd_compl_tm()), but since blk_mq_tagset_busy_iter() only iterates over all reserved tags and requests which are not in IDLE state, ufshcd_compl_tm() never gets a chance to run. Thus, TMR always ends up with completion timeout. Fix it by calling blk_mq_start_request() in __ufshcd_issue_tm_cmd(). Link: https://lore.kernel.org/r/1617262750-4864-2-git-send-email-cang@codeaurora.org Fixes: 69a6c269c097 ("scsi: ufs: Use blk_{get,put}_request() to allocate and free TMFs") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 11:35:17 +0000