summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2021-04-13scsi: qla2xxx: Reuse existing error handling pathChristophe JAILLET
There is no need to duplicate code, use the existing error handling path to free resources. This is more future-proof. Link: https://lore.kernel.org/r/6973844a1532ec2dc8e86f3533362e79d78ed774.1618132821.git.christophe.jaillet@wanadoo.fr Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: qla2xxx: Remove unneeded if-null-free checkQiheng Lin
Eliminate the following coccicheck warning: drivers/scsi/qla2xxx/qla_os.c:4622:2-7: WARNING: NULL check before some freeing functions is not needed. drivers/scsi/qla2xxx/qla_os.c:4637:3-8: WARNING: NULL check before some freeing functions is not needed. Link: https://lore.kernel.org/r/20210409120925.7122-1-linqiheng@huawei.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Qiheng Lin <linqiheng@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: mpt3sas: Fix out-of-bounds warnings in _ctl_addnl_diag_queryGustavo A. R. Silva
Fix the following out-of-bounds warnings by embedding existing struct htb_rel_query into struct mpt3_addnl_diag_query, instead of duplicating its members: include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset [19, 32] from the object at 'karg' is out of the bounds of referenced subobject 'buffer_rel_condition' with type 'short unsigned int' at offset 16 [-Warray-bounds] include/linux/fortify-string.h:22:29: warning: '__builtin_memset' offset [19, 32] from the object at 'karg' is out of the bounds of referenced subobject 'buffer_rel_condition' with type 'short unsigned int' at offset 16 [-Warray-bounds] The problem is that the original code is trying to copy data into a bunch of struct members adjacent to each other in a single call to memcpy(). All those members are exactly the same contained in struct htb_rel_query, so instead of duplicating them into struct mpt3_addnl_diag_query, replace them with new member rel_query of type struct htb_rel_query. So, now that this new object is introduced, memcpy() doesn't overrun the length of &karg.buffer_rel_condition, because the address of the new struct object _rel_query_ is used as destination, instead. The same issue is present when calling memset(), and it is fixed with this same approach. Below is a comparison of struct mpt3_addnl_diag_query, before and after this change (the size and cachelines remain the same): $ pahole -C mpt3_addnl_diag_query drivers/scsi/mpt3sas/mpt3sas_ctl.o struct mpt3_addnl_diag_query { struct mpt3_ioctl_header hdr; /* 0 12 */ uint32_t unique_id; /* 12 4 */ uint16_t buffer_rel_condition; /* 16 2 */ uint16_t reserved1; /* 18 2 */ uint32_t trigger_type; /* 20 4 */ uint32_t trigger_info_dwords[2]; /* 24 8 */ uint32_t reserved2[2]; /* 32 8 */ /* size: 40, cachelines: 1, members: 7 */ /* last cacheline: 40 bytes */ }; $ pahole -C mpt3_addnl_diag_query drivers/scsi/mpt3sas/mpt3sas_ctl.o struct mpt3_addnl_diag_query { struct mpt3_ioctl_header hdr; /* 0 12 */ uint32_t unique_id; /* 12 4 */ struct htb_rel_query rel_query; /* 16 16 */ uint32_t reserved2[2]; /* 32 8 */ /* size: 40, cachelines: 1, members: 4 */ /* last cacheline: 40 bytes */ }; Also, this helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). Link: https://github.com/KSPP/linux/issues/109 Link: https://lore.kernel.org/lkml/60659889.bJJILx2THu3hlpxW%25lkp@intel.com/ Link: https://lore.kernel.org/r/20210401162054.GA397186@embeddedor Build-tested-by: kernel test robot <lkp@intel.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: qedf: Use devlink to report errors and recoveryJaved Hasan
Use devlink_health_report() to push error indications. Implement this in qede via a callback function to make it possible to reuse it for other drivers sitting on top of qed in future. Also remove forcible recovery trigger and put it as a normal devlink callback in qed module. This allows user to enable/disable it via: devlink health set pci/xxxx:xx:xx.x reporter fw_fatal auto_recover false Link: https://lore.kernel.org/r/20210331164917.24662-3-jhasan@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: qedf: Enable devlink supportJaved Hasan
Devlink instance lifetime was linked to qed_dev object. That caused devlink to be recreated on each recovery. Change it by making higher level driver (qede) responsible for lifetime management. This way devlink survives recoveries. qede now stores devlink structure pointer as a part of its device object, devlink private data contains a linkage structure, qed_devlink. Link: https://lore.kernel.org/r/20210331164917.24662-2-jhasan@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: sni_53c710: Add IRQ checkSergey Shtylyov
The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to request_irq() (which takes *unsigned* IRQ #s), causing it to fail with -EINVAL (overridden by -ENODEV further below). Stop calling request_irq() with the invalid IRQ #s. Link: https://lore.kernel.org/r/8f4b8fa5-8251-b977-70a1-9099bcb4bb17@omprussia.ru Fixes: c27d85f3f3c5 ("[SCSI] SNI RM 53c710 driver") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: sun3x_esp: Add IRQ checkSergey Shtylyov
The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding the real error code. Stop calling request_irq() with the invalid IRQ #s. Link: https://lore.kernel.org/r/363eb4c8-a3bf-4dc9-2a9e-90f349030a15@omprussia.ru Fixes: 0bb67f181834 ("[SCSI] sun3x_esp: convert to esp_scsi") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: jazz_esp: Add IRQ checkSergey Shtylyov
The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding the real error code. Stop calling request_irq() with the invalid IRQ #s. Link: https://lore.kernel.org/r/594aa9ae-2215-49f6-f73c-33bd38989912@omprussia.ru Fixes: 352e921f0dd4 ("[SCSI] jazz_esp: converted to use esp_core") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: hisi_sas: Fix IRQ checksSergey Shtylyov
Commit df2d8213d9e3 ("hisi_sas: use platform_get_irq()") failed to take into account that irq_of_parse_and_map() and platform_get_irq() have a different way of indicating an error: the former returns 0 and the latter returns a negative error code. Fix up the IRQ checks! Link: https://lore.kernel.org/r/810f26d3-908b-1d6b-dc5c-40019726baca@omprussia.ru Fixes: df2d8213d9e3 ("hisi_sas: use platform_get_irq()") Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: ufs: ufshcd-pltfrm: Fix deferred probingSergey Shtylyov
The driver overrides the error codes returned by platform_get_irq() to -ENODEV, so if it returns -EPROBE_DEFER, the driver would fail the probe permanently instead of the deferred probing. Propagate the error code upstream as it should have been done from the start... Link: https://lore.kernel.org/r/420364ca-614a-45e3-4e35-0e0653c7bc53@omprussia.ru Fixes: 2953f850c3b8 ("[SCSI] ufs: use devres functions for ufshcd") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: snic: Convert to DEFINE_SHOW_ATTRIBUTE()dingsenjie
Use DEFINE_SHOW_ATTRIBUTE() macro to simplify the code. Link: https://lore.kernel.org/r/20210331065326.18804-1-dingsenjie@163.com Signed-off-by: dingsenjie <dingsenjie@yulong.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: ufs: ufs-qcom: Remove redundant dev_err() call in ufs_qcom_init()Ye Bin
There is a error message within devm_ioremap_resource() already, so remove the dev_err() call to avoid redundant error message. Link: https://lore.kernel.org/r/20210409075522.2111083-1-yebin10@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: hisi_sas: Print SATA device SAS address for soft reset failureLuo Jiaxing
Add (pseudo) SAS address for ATA software reset failure log to assist in debugging. Link: https://lore.kernel.org/r/1617709711-195853-7-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: hisi_sas: Warn in v3 hw channel interrupt handler when status reg clearedLuo Jiaxing
If a channel interrupt occurs without any status bit set, the handler will return directly. However, if such redundant interrupts are received, it's better to check what happen, so add logs for this. Link: https://lore.kernel.org/r/1617709711-195853-6-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Yihang Li <liyihang6@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: hisi_sas: Directly snapshot registers when executing a resetJianqin Xie
The debugfs snapshot should be executed before the reset occurs to ensure that the register contents are saved properly. As such, it is incorrect to queue the debugfs dump when running a reset as the reset will occur prior to the snapshot work item is handler. Therefore, directly snapshot registers in the reset work handler. Link: https://lore.kernel.org/r/1617709711-195853-5-git-send-email-john.garry@huawei.com Signed-off-by: Jianqin Xie <xiejianqin@hisilicon.com> Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: hisi_sas: Call sas_unregister_ha() to roll back if .hw_init() failsXiang Chen
Function sas_unregister_ha() needs to be called to roll back if hisi_hba->hw->hw_init() fails in function hisi_sas_probe() or hisi_sas_v3_probe(). Make that change. Link: https://lore.kernel.org/r/1617709711-195853-4-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: hisi_sas: Print SAS address for v3 hw erroneous completion printLuo Jiaxing
To help debugging efforts, print the device SAS address for v3 hw erroneous completion log. Here is an example print: hisi_sas_v3_hw 0000:b4:02.0: erroneous completion iptt=2193 task=000000002b0c13f8 dev id=17 addr=570fd45f9d17b001 Link: https://lore.kernel.org/r/1617709711-195853-3-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: hisi_sas: Delete some unused callbacksLuo Jiaxing
The debugfs code has been relocated to v3 hw driver, so delete unused struct hisi_sas_hw function pointers snapshot_{prepare, restore}. Link: https://lore.kernel.org/r/1617709711-195853-2-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: pm8001: Clean up open bracesLuo Jiaxing
checkpatch reports the following: ERROR: that open brace { should be on the previous line +static struct error_fw flash_error_table[] = +{ Fix a couple of instances of misplaced open bracket. Link: https://lore.kernel.org/r/1617886593-36421-3-git-send-email-luojiaxing@huawei.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Jianqin Xie <xiejianqin@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: pm8001: Clean up white spaceLuo Jiaxing
checkpatch reports the following: ERROR: space prohibited before that ',' (ctx:WxW) +int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha , void *piomb); Remove unnecessary whitespace. Link: https://lore.kernel.org/r/1617886593-36421-2-git-send-email-luojiaxing@huawei.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Jianqin Xie <xiejianqin@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: pm80xx: Fix potential infinite loopColin Ian King
The for-loop iterates with a u8 loop counter i and compares this with the loop upper limit of pm8001_ha->max_q_num which is a u32 type. There is a potential infinite loop if pm8001_ha->max_q_num is larger than the u8 loop counter. Fix this by making the loop counter the same type as pm8001_ha->max_q_num. [mkp: this is purely theoretical, max_q_num is currently limited to 64] Link: https://lore.kernel.org/r/20210407135840.494747-1-colin.king@canonical.com Fixes: 65df7d1986a1 ("scsi: pm80xx: Fix chip initialization failure") Addresses-Coverity: ("Infinite loop") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: pm80xx: Remove busy wait from mpi_uninit_check()Igor Pylypiv
mpi_uninit_check() is not being called in an atomic context. The only caller of mpi_uninit_check() is pm80xx_chip_soft_rst(). Callers of pm80xx_chip_soft_rst(): - pm8001_ioctl_soft_reset() - pm8001_pci_probe() - pm8001_pci_remove() - pm8001_pci_suspend() - pm8001_pci_resume() There was a similar fix for mpi_init_check() in commit d71023af4bec ("scsi: pm80xx: Do not busy wait in MPI init check") Link: https://lore.kernel.org/r/20210406180534.1924345-3-ipylypiv@google.com Reviewed-by: Vishakha Channapattan <vishakhavc@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check()Igor Pylypiv
The mpi_uninit_check() takes longer for inbound doorbell register to be cleared. Increase the timeout substantially so that the driver does not fail to load. Previously, the inbound doorbell wait time was mistakenly increased in the mpi_init_check() instead of mpi_uninit_check(). It is okay to leave the mpi_init_check() wait time as-is as these are timeout values and if there is a failure, waiting longer is not an issue. Link: https://lore.kernel.org/r/20210406180534.1924345-2-ipylypiv@google.com Fixes: e90e236250e9 ("scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check") Reviewed-by: Vishakha Channapattan <vishakhavc@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12Merge branch '5.12/scsi-fixes' into 5.13/scsi-stagingMartin K. Petersen
Resolve a couple of conflicts between the 5.12 fixes branch and the 5.13 staging tree (iSCSI target and UFS). Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-10Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Seven fixes, all in drivers. The hpsa three are the most extensive and the most problematic: it's a packed structure misalignment that oopses on ia64 but looks like it would also oops on quite a few non-x86 architectures. The pm80xx is a regression and the rest are bug fixes for patches in the misc tree" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: scsi_transport_srp: Don't block target in SRP_PORT_LOST state scsi: target: iscsi: Fix zero tag inside a trace event scsi: pm80xx: Fix chip initialization failure scsi: ufs: core: Fix wrong Task Tag used in task management request UPIUs scsi: ufs: core: Fix task management request completion timeout scsi: hpsa: Add an assert to prevent __packed reintroduction scsi: hpsa: Fix boot on ia64 (atomic_t alignment) scsi: hpsa: Use __packed on individual structs, not header-wide
2021-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-07scsi: libsas: Reset num_scatter if libata marks qc as NODATAJolly Shah
When the cache_type for the SCSI device is changed, the SCSI layer issues a MODE_SELECT command. The caching mode details are communicated via a request buffer associated with the SCSI command with data direction set as DMA_TO_DEVICE (scsi_mode_select()). When this command reaches the libata layer, as a part of generic initial setup, libata layer sets up the scatterlist for the command using the SCSI command (ata_scsi_qc_new()). This command is then translated by the libata layer into ATA_CMD_SET_FEATURES (ata_scsi_mode_select_xlat()). The libata layer treats this as a non-data command (ata_mselect_caching()), since it only needs an ATA taskfile to pass the caching on/off information to the device. It does not need the scatterlist that has been setup, so it does not perform dma_map_sg() on the scatterlist (ata_qc_issue()). Unfortunately, when this command reaches the libsas layer (sas_ata_qc_issue()), libsas layer sees it as a non-data command with a scatterlist. It cannot extract the correct DMA length since the scatterlist has not been mapped with dma_map_sg() for a DMA operation. When this partially constructed SAS task reaches pm80xx LLDD, it results in the following warning: "pm80xx_chip_sata_req 6058: The sg list address start_addr=0x0000000000000000 data_len=0x0end_addr_high=0xffffffff end_addr_low=0xffffffff has crossed 4G boundary" Update libsas to handle ATA non-data commands separately so num_scatter and total_xfer_len remain 0. Link: https://lore.kernel.org/r/20210318225632.2481291-1-jollys@google.com Fixes: 53de092f47ff ("scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA") Tested-by: Luo Jiaxing <luojiaxing@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Jolly Shah <jollys@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-07scsi: iscsi: Fix iSCSI cls conn stateMike Christie
In commit 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and sync thread") I missed that libiscsi was now setting the iSCSI class state, and that patch ended up resetting the state during conn stoppage and using the wrong state value during ep_disconnect. This patch moves the setting of the class state to the class module and then fixes the two issues above. Link: https://lore.kernel.org/r/20210406171746.5016-1-michael.christie@oracle.com Fixes: 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and sync thread") Cc: Gulam Mohamed <gulam.mohamed@oracle.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-06scsi: remove the unchecked_isa_dma flagChristoph Hellwig
Remove the unchecked_isa_dma now that all users are gone. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20210331073001.46776-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-06advansys: remove ISA supportChristoph Hellwig
This is the last piece in the kernel requiring the block layer ISA bounce buffering, and it does not actually look used. So remove it to see if anyone screams, in which case we'll need to find a solution to fix it back up. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20210331073001.46776-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-06BusLogic: reject broken old firmware that requires ISA-style bounce bufferingChristoph Hellwig
Warn on and don't support adapters that have a DMA bug that forces ISA-style bounce buffering. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Khalid Aziz <khalid@gonehiking.org> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20210331073001.46776-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-06Buslogic: remove ISA supportChristoph Hellwig
The ISA support in Buslogic has been broken for a long time, as all the I/O path expects a struct device for DMA mapping that is derived from the PCI device, which would simply crash for ISA adapters. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Khalid Aziz <khalid@gonehiking.org> Link: https://lore.kernel.org/r/20210331073001.46776-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-06aha1542: use a local bounce bufferChristoph Hellwig
To remove the last user of the unchecked_isa_dma flag and thus the block layer ISA bounce buffering switch this driver to use its own local bounce buffer. This has the effect of not needing the chain indirection and supporting and unlimited number of segments. It does however limit the transfer size for each command to something that can be reasonable allocated by dma_alloc_coherent like 8K. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20210331073001.46776-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-06scsi: libsas: Clean up whitespaceLuo Jiaxing
checkpatch reported several whitespace errors. Fix them all. Link: https://lore.kernel.org/r/1616675396-6108-3-git-send-email-luojiaxing@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: libsas: Correctly indent statements in sas_to_ata_err()Luo Jiaxing
checkpatch reported an error in sas_to_ata_err(). switch and case statements are incorrectly indented. Link: https://lore.kernel.org/r/1616675396-6108-2-git-send-email-luojiaxing@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: qedf: Remove unused include of linux/version.hTian Tao
Remove unnecessary include of linux/version.h. Link: https://lore.kernel.org/r/1617283618-19346-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: bfa: Remove unnecessary struct declarationsWan Jiabing
struct bfa_fcs_s is declared twice. First is declared at line 50, remove the duplicate. struct bfa_fcs_fabric_s is defined at line 175, remove unnecessary declaration. Link: https://lore.kernel.org/r/20210401063535.992487-1-wanjiabing@vivo.com Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: ufs: core: Fix out-of-bounds warnings in ufshcd_exec_raw_upiu_cmd()Gustavo A. R. Silva
Fix the following out-of-bounds warnings by enclosing some structure members into new structure objects upiu_req and upiu_rsp: include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset [29, 48] from the object at 'treq' is out of the bounds of referenced subobject 'req_header' with type 'struct utp_upiu_header' at offset 16 [-Warray-bounds] include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset [61, 80] from the object at 'treq' is out of the bounds of referenced subobject 'rsp_header' with type 'struct utp_upiu_header' at offset 48 [-Warray-bounds] arch/m68k/include/asm/string.h:72:25: warning: '__builtin_memcpy' offset [29, 48] from the object at 'treq' is out of the bounds of referenced subobject 'req_header' with type 'struct utp_upiu_header' at offset 16 [-Warray-bounds] arch/m68k/include/asm/string.h:72:25: warning: '__builtin_memcpy' offset [61, 80] from the object at 'treq' is out of the bounds of referenced subobject 'rsp_header' with type 'struct utp_upiu_header' at offset 48 [-Warray-bounds] Refactor the code by making it more structured. The problem is that the original code is trying to copy data into a bunch of struct members adjacent to each other in a single call to memcpy(). Now that a new struct _upiu_req_ enclosing all those adjacent members is introduced, memcpy() doesn't overrun the length of &treq.req_header, because the address of the new struct object _upiu_req_ is used as the destination, instead. The same problem is present when memcpy() overruns the length of the source &treq.rsp_header; in this case the address of the new struct object _upiu_rsp_ is used, instead. Also, this helps with the ongoing efforts to enable -Warray-bounds and avoid confusing the compiler. Link: https://github.com/KSPP/linux/issues/109 Link: https://lore.kernel.org/lkml/60640558.lsAxiK6otPwTo9rv%25lkp@intel.com/ Link: https://lore.kernel.org/r/20210331224338.GA347171@embeddedor Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Build-tested-by: kernel test robot <lkp@intel.com>
2021-04-05scsi: fnic: Remove unnecessary spin_lock_init() and INIT_LIST_HEAD()Yang Yingliang
The spinlock and list head of fnic_list are initialized statically. It is unnecessary to initialize them. Link: https://lore.kernel.org/r/20210330125911.1050879-1-yangyingliang@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: mpt3sas: Block PCI config access from userspace during resetSreekanth Reddy
While diag reset is in progress there is short duration where all access to controller's PCI config space from the host needs to be blocked. This is due to a hardware limitation of the IOC controllers. Block all access to controller's config space from userland applications by calling pci_cfg_access_lock() while diag reset is in progress and unlocking it again after the controller comes back to ready state. Link: https://lore.kernel.org/r/20210330105137.20728-1-sreekanth.reddy@broadcom.com Cc: stable@vger.kernel.org #v5.4.108+ Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: mpt3sas: Fix endianness for ActiveCablePowerRequirementSreekanth Reddy
Covert ActiveCablePowerRequirement's value to target CPU endian before displaying it. Link: https://lore.kernel.org/r/20210330105106.20569-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: mpt3sas: Only one vSES is present even when IOC has multi vSESSreekanth Reddy
Whenever the driver is adding a vSES to virtual-phys list it is reinitializing the list head. Hence those vSES devices which were added previously are lost. Stop reinitializing the list every time a new vSES device is added. Link: https://lore.kernel.org/r/20210330105004.20413-1-sreekanth.reddy@broadcom.com Cc: stable@vger.kernel.org #v5.11.10+ Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: scsi_dh_alua: Remove check for ASC 24h in alua_rtpg()Ewan D. Milne
Some arrays return ILLEGAL_REQUEST with ASC 00h if they don't support the RTPG extended header so remove the check for INVALID FIELD IN CDB. Link: https://lore.kernel.org/r/20210331201154.20348-1-emilne@redhat.com Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: scsi_dh_alua: Prevent duplicate pg info print in alua_rtpg()John Pittman
Due to the frequency that alua_rtpg() is called, the path group info print within can print the same info multiple times in the logs, subsequent prints adding no new information or value. To reproduce: # modprobe scsi_debug vpd_use_hostno=0 # systemctl start multipathd.service To fix, check stored values, only printing at alua attach/activate and if any of the values change. Link: https://lore.kernel.org/r/20210331181656.5046-1-jpittman@redhat.com Reviewed-by: David Jeffery <djeffery@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: John Pittman <jpittman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: scsi_transport_srp: Don't block target in SRP_PORT_LOST stateMartin Wilck
rport_dev_loss_timedout() sets the rport state to SRP_PORT_LOST and the SCSI target state to SDEV_TRANSPORT_OFFLINE. If this races with srp_reconnect_work(), a warning is printed: Mar 27 18:48:07 ictm1604s01h4 kernel: dev_loss_tmo expired for SRP port-18:1 / host18. Mar 27 18:48:07 ictm1604s01h4 kernel: ------------[ cut here ]------------ Mar 27 18:48:07 ictm1604s01h4 kernel: scsi_internal_device_block(18:0:0:100) failed: ret = -22 Mar 27 18:48:07 ictm1604s01h4 kernel: Call Trace: Mar 27 18:48:07 ictm1604s01h4 kernel: ? scsi_target_unblock+0x50/0x50 [scsi_mod] Mar 27 18:48:07 ictm1604s01h4 kernel: starget_for_each_device+0x80/0xb0 [scsi_mod] Mar 27 18:48:07 ictm1604s01h4 kernel: target_block+0x24/0x30 [scsi_mod] Mar 27 18:48:07 ictm1604s01h4 kernel: device_for_each_child+0x57/0x90 Mar 27 18:48:07 ictm1604s01h4 kernel: srp_reconnect_rport+0xe4/0x230 [scsi_transport_srp] Mar 27 18:48:07 ictm1604s01h4 kernel: srp_reconnect_work+0x40/0xc0 [scsi_transport_srp] Avoid this by not trying to block targets for rports in SRP_PORT_LOST state. Link: https://lore.kernel.org/r/20210401091105.8046-1-mwilck@suse.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: pm80xx: Fix chip initialization failureViswas G
Inbound and outbound queues were not properly configured and that lead to MPI configuration failure. Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues") Cc: stable@vger.kernel.org # 5.10+ Link: https://lore.kernel.org/r/20210402054212.17834-1-Viswas.G@microchip.com.com Reported-and-tested-by: Ash Izat <ash@ai0.uk> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Update version to 2.1.8-045Don Brace
Update version. Link: https://lore.kernel.org/r/161549387469.25025.12859568843576080076.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Gerry Morong <gerry.morong@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Add new PCI IDsKevin Barnett
Add support for newer hardware. Link: https://lore.kernel.org/r/161549386882.25025.2594251735886014958.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Acked-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Correct system hangs when resuming from hibernationKevin Barnett
Correct system hangs when resuming from hibernation after first successful hibernation/resume cycle. Rare condition involving OFA. Note: Suspend/resume is not supported on many platforms. It was originally intended for workstations. Link: https://lore.kernel.org/r/161549386295.25025.14555840632114761610.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Update enclosure identifier in sysfsMurthy Bhat
Update enclosure identifier field corresponding to physical devices in lsscsi/sysfs. During device add the SCSI devtype is filled in during slave_configure(). However, when pqi_scsi_update_device() runs (REGNEWD) the firmware returns zero for the SCSI devtype field, and valid devtype is overwritten by zero. Due to this, lsscsi output shows wrong values. Link: https://lore.kernel.org/r/161549385708.25025.17234953506918043750.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 10:56:59 +0000