| Age | Commit message (Collapse) | Author |
|---|
|
Pull virtio updates from Michael Tsirkin:
"Fixes, cleanups, performance
A bunch of changes to virtio, most affecting virtio net. Also ptr_ring
batched zeroing - first of batching enhancements that seems ready."
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
s390/virtio: change maintainership
tools/virtio: fix spelling mistake: "wakeus" -> "wakeups"
virtio_net: tidy a couple debug statements
ptr_ring: support testing different batching sizes
ringtest: support test specific parameters
ptr_ring: batch ring zeroing
virtio: virtio_driver doc
virtio_net: don't reset twice on XDP on/off
virtio_net: fix support for small rings
virtio_net: reduce alignment for buffers
virtio_net: rework mergeable buffer handling
virtio_net: allow specifying context for rx
virtio: allow extra context per descriptor
tools/virtio: fix build breakage
virtio: add context flag to find vqs
virtio: wrap find_vqs
ringtest: fix an assert statement
|
|
We are going to add more parameters to find_vqs, let's wrap the call so
we don't need to tweak all drivers every time.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Passed through SCSI targets may have transfer limits which come from the
host SCSI controller or something on the host side other than the target
itself.
To make this work properly, the hypervisor can adjust the target's VPD
information to advertise these limits. But for that to work, the guest
has to look at the VPD pages, which we won't do by default if it is an
SPC-2 device, even if it does actually support it.
This adds a workaround to address this, forcing devices attached to a
virtio-scsi controller to always check the VPD pages. This is modelled
on a similar workaround for the storvsc (Hyper-V) SCSI controller,
although that exists for slightly different reasons.
A specific case which causes this is a volume from IBM's IPR RAID
controller (which presents as an SPC-2 device, although it does support
VPD) passed through with qemu's 'scsi-block' device.
[mkp: fixed typo]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use automatic IRQ affinity assignment in the virtio layer if available,
and build the blk-mq queues based on it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add a struct irq_affinity pointer to the find_vqs methods, which if set
is used to tell the PCI layer to create the MSI-X vectors for our I/O
virtqueues with the proper affinity from the start. Compared to after
the fact affinity hints this gives us an instantly working setup and
allows to allocate the irq descritors node-local and avoid interconnect
traffic. Last but not least this will allow blk-mq queues are created
based on the interrupt affinity for storage drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In the case of a graceful set of detaches, where the virtio-scsi-ccw
disk is removed from the guest prior to the controller, the guest
behaves quite normally. Specifically, the detach gets us into
sd_sync_cache to issue a Synchronize Cache(10) command, which
immediately fails (and is retried a couple of times) because the device
has been removed. Later, the removal of the controller sees two CRWs
presented, but there's no further indication of the removal from the
guest viewpoint.
[ 17.217458] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 17.219257] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 21.449400] crw_info : CRW reports slct=0, oflw=0, chn=1, rsc=3, anc=0, erc=4, rsid=2
[ 21.449406] crw_info : CRW reports slct=0, oflw=0, chn=0, rsc=3, anc=0, erc=4, rsid=0
However, on s390, the SCSI disks can be removed "by surprise" when an
entire controller (host) is removed and all associated disks are removed
via the loop in scsi_forget_host. The same call to sd_sync_cache is
made, but because the controller has already been removed, the
Synchronize Cache(10) command is neither issued (and then failed) nor
rejected.
That the I/O isn't returned means the guest cannot have other devices
added nor removed, and other tasks (such as shutdown or reboot) issued
by the guest will not complete either. The virtio ring has already been
marked as broken (via virtio_break_device in virtio_ccw_remove), but we
still attempt to queue the command only to have it remain there. The
calling sequence provides a bit of distinction for us:
virtscsi_queuecommand()
-> virtscsi_kick_cmd()
-> virtscsi_add_cmd()
-> virtqueue_add_sgs()
-> virtqueue_add()
if success
return 0
elseif vq->broken or vring_mapping_error()
return -EIO
else
return -ENOSPC
A return of ENOSPC is generally a temporary condition, so returning
"host busy" from virtscsi_queuecommand makes sense here, to have it
redriven in a moment or two. But the EIO return code is more of a
permanent error and so it would be wise to return the I/O itself and
allow the calling thread to finish gracefully. The result is these four
kernel messages in the guest (the fourth one does not occur prior to
this patch):
[ 22.921562] crw_info : CRW reports slct=0, oflw=0, chn=1, rsc=3, anc=0, erc=4, rsid=2
[ 22.921580] crw_info : CRW reports slct=0, oflw=0, chn=0, rsc=3, anc=0, erc=4, rsid=0
[ 22.921978] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 22.921993] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
I opted to fill in the same response data that is returned from the more
graceful device detach, where the disk device is removed prior to the
controller device.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"This update includes the usual round of major driver updates (hpsa,
be2iscsi, hisi_sas, zfcp, cxlflash). There's a new incarnation of hpsa
called smartpqi for which a driver is added, there's some cleanup work
of the ibm vscsi target and updates to libfc, plus a whole host of
minor fixes and updates and finally the removal of several ISA drivers
which seem not to have been used for years"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (173 commits)
scsi: mvsas: Mark symbols static where possible
scsi: pm8001: Mark symbols static where possible
scsi: arcmsr: Simplify user_len checking
scsi: fcoe: fix off by one in eth2fc_speed()
scsi: dtc: remove from tree
scsi: t128: remove from tree
scsi: pas16: remove from tree
scsi: u14-34f: remove from tree
scsi: ultrastor: remove from tree
scsi: in2000: remove from tree
scsi: wd7000: remove from tree
scsi: scsi_dh_alua: Fix memory leak in alua_rtpg()
scsi: lpfc: Mark symbols static where possible
scsi: hpsa: correct call to hpsa_do_reset
scsi: ufs: Get a TM service response from the correct offset
scsi: ibmvfc: Fix I/O hang when port is not mapped
scsi: megaraid_sas: clean function declarations in megaraid_sas_base.c up
scsi: ipr: Remove redundant messages at adapter init time
scsi: ipr: Don't log unnecessary 9084 error details
scsi: smartpqi: raid bypass lba calculation fix
...
|
|
Install the callbacks via the state machine. It uses the multi instance
infrastructure of the hotplug code to handle each interface.
virtscsi_set_affinity() is removed from virtscsi_init() because
virtscsi_cpu_notif_add() (the function which registers the instance) is invoked
right after it and the cpuhp_state_add_instance() functions invokes the startup
callback on all online CPUs.
The same thing can not be applied virtscsi_cpu_notif_remove() because
virtscsi_remove_vqs() invokes virtscsi_set_affinity() with affinity = false as
argument but the old CPU_DEAD state invoked the function with affinity = true
(which does not match the DEAD callback).
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: linux-scsi@vger.kernel.org
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: virtualization@lists.linux-foundation.org
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160906170457.32393-11-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
There is only one waiter for the completion, therefore there is no need
to use complete_all(). Let's make that clear by using complete() instead
of complete_all().
The usage pattern of the completion is:
waiter context waker context
virtscsi_tmf()
DECLARE_COMPLETION_ONSTACK()
virtscsi_kick_cmd()
wait_for_completion()
virtscsi_complete_free()
complete()
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull virtio/vhost fixes from Michael Tsirkin:
"Bugfixes and documentation fixes.
Igor's patch that allows users to tweak memory table size is
borderline, but it does fix known crashes, so I merged it"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: add max_mem_regions module parameter
vhost: extend memory regions allocation to vmalloc
9p/trans_virtio: reset virtio device on remove
virtio/s390: rename drivers/s390/kvm -> drivers/s390/virtio
MAINTAINERS: separate section for s390 virtio drivers
virtio: define virtio_pci_cfg_cap in header.
virtio: Fix typecast of pointer in vring_init()
virtio scsi: fix unused variable warning
vhost: use binary search instead of linear in find_region()
virtio_net: document VIRTIO_NET_CTRL_GUEST_OFFLOADS
|
|
drivers/scsi/virtio_scsi.c: In function 'virtscsi_probe':
drivers/scsi/virtio_scsi.c:952:11: warning: unused variable 'host_prot' [-Wunused-variable]
int err, host_prot;
^
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
T10 PI is just another optional feature, LLDDs should work without
the infrastructure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
|
|
Some devices might not implement config space access
(e.g. remoteproc used not to - before 3.9).
virtio/scsi needs config space access so make it
fail gracefully if not there.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Pull virtio updates from Michael Tsirkin:
"virtio: virtio 1.0 support, misc patches
This adds a lot of infrastructure for virtio 1.0 support. Notable
missing pieces: virtio pci, virtio balloon (needs spec extension),
vhost scsi.
Plus, there are some minor fixes in a couple of places.
Note: some net drivers are affected by these patches. David said he's
fine with merging these patches through my tree.
Rusty's on vacation, he acked using my tree for these, too"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (70 commits)
virtio_ccw: finalize_features error handling
virtio_ccw: future-proof finalize_features
virtio_pci: rename virtio_pci -> virtio_pci_common
virtio_pci: update file descriptions and copyright
virtio_pci: split out legacy device support
virtio_pci: setup config vector indirectly
virtio_pci: setup vqs indirectly
virtio_pci: delete vqs indirectly
virtio_pci: use priv for vq notification
virtio_pci: free up vq->priv
virtio_pci: fix coding style for structs
virtio_pci: add isr field
virtio: drop legacy_only driver flag
virtio_balloon: drop legacy_only driver flag
virtio_ccw: rev 1 devices set VIRTIO_F_VERSION_1
virtio: allow finalize_features to fail
virtio_ccw: legacy: don't negotiate rev 1/features
virtio: add API to detect legacy devices
virtio_console: fix sparse warnings
vhost: remove unnecessary forward declarations in vhost.h
...
|
|
Core activates this bit automatically now,
drop it from drivers that set it explicitly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Note: for consistency, and to avoid sparse errors,
convert all fields, even those no longer in use
for virtio v1.0.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop the now unused reason argument from the ->change_queue_depth method.
Also add a return value to scsi_adjust_queue_depth, and rename it to
scsi_change_queue_depth now that it can be used as the default
->change_queue_depth implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
All drivers use the implementation for ramping the queue up and down, so
instead of overloading the change_queue_depth method call the
implementation diretly if the driver opts into it by setting the
track_queue_depth flag in the host template.
Note that a few drivers validated the new queue depth in their
change_queue_depth method, but as we never go over the queue depth
set during slave_configure or the sysfs file this isn't nessecary
and can safely be removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
|
|
Since virtio_scsi has supported multi virtqueue already,
it is natural to map the virtque to hw-queue of blk-mq.
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Remove the tagged argument from scsi_adjust_queue_depth, and just let it
handle the queue depth. For most drivers those two are fairly separate,
given that most modern drivers don't care about the SCSI "tagged" status
of a command at all, and many old drivers allow queuing of multiple
untagged commands in the driver.
Instead we start out with the ->simple_tags flag set before calling
->slave_configure, which is how all drivers actually looking at
->simple_tags except for one worke anyway. The one other case looks
broken, but I've kept the behavior as-is for now.
Except for that we only change ->simple_tags from the ->change_queue_type,
and when rejecting a tag message in a single driver, so keeping this
churn out of scsi_adjust_queue_depth is a clear win.
Now that the usage of scsi_adjust_queue_depth is more obvious we can
also remove all the trivial instances in ->slave_alloc or ->slave_configure
that just set it to the cmd_per_lun default.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Enable VQs early like we do for restore.
This makes it possible to drop the scan callback,
moving scanning into the probe function, and making
code simpler.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
We cancel event work on device removal, but an interrupt
could trigger immediately after this, and queue it
again.
To fix, set a flag.
Loosely based on patch by Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Michael S. Tsirkin noticed a race condition:
we reset device on freeze, but system WQ is still
running so it might try adding bufs to a VQ meanwhile.
To fix, switch to handling events from the freezable WQ.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
virtio spec requires drivers to set DRIVER_OK before using VQs.
This is set automatically after restore returns, virtio scsi violated
this rule on restore by kicking event vq within restore.
To fix, call virtio_device_ready before using event queue.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
We currently kick event within virtscsi_init,
before host is fully initialized.
This can in theory confuse guest if device
consumes the buffers immediately.
To fix, move virtscsi_kick_event_all out to scan/restore.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
change_queue_depth allows changing per-target queue depth via sysfs.
It also allows the SCSI midlayer to ramp down the number of concurrent
inflight requests in response to a SCSI BUSY status response and allows
the midlayer to ramp the count back up to the device maximum when the
BUSY condition has resolved.
Signed-off-by: Venkatesh Srinivas <venkateshs@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The spinlock of tgt_lock is only for serializing read and write
req_vq, one lockless seqcount is enough for the purpose.
On one 16core VM with vhost-scsi backend, the patch can improve
IOPS with 3% on random read test.
Signed-off-by: Ming Lei <ming.lei@canonical.com>
[Add initialization in virtscsi_target_alloc. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Even though the virtio-scsi spec guarantees that all requests related
to the TMF will have been completed by the time the TMF itself completes,
the request queue's callback might not have run yet. This causes requests
to be completed more than once, and as a result triggers a variety of
BUGs or oopses.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Calling the workqueue interface on uninitialized work items isn't a
good idea even if they're zeroed. It's not failing catastrophically only
through happy accidents.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
"The highlights this round include:
- Add support for T10 PI pass-through between vhost-scsi +
virtio-scsi (MST + Paolo + MKP + nab)
- Add support for T10 PI in qla2xxx target mode (Quinn + MKP + hch +
nab, merged through scsi.git)
- Add support for percpu-ida pre-allocation in qla2xxx target code
(Quinn + nab)
- A number of iser-target fixes related to hardening the network
portal shutdown path (Sagi + Slava)
- Fix response length residual handling for a number of control CDBs
(Roland + Christophe V.)
- Various iscsi RFC conformance fixes in the CHAP authentication path
(Tejas and Calsoft folks + nab)
- Return TASK_SET_FULL status for tcm_fc(FCoE) DataIn + Response
failures (Vasu + Jun + nab)
- Fix long-standing ABORT_TASK + session reset hang (nab)
- Convert iser-initiator + iser-target to include T10 bytes into EDTL
(Sagi + Or + MKP + Mike Christie)
- Fix NULL pointer dereference regression related to XCOPY introduced
in v3.15 + CC'ed to v3.12.y (nab)"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (34 commits)
target: Fix NULL pointer dereference for XCOPY in target_put_sess_cmd
vhost-scsi: Include prot_bytes into expected data transfer length
TARGET/sbc,loopback: Adjust command data length in case pi exists on the wire
libiscsi, iser: Adjust data_length to include protection information
scsi_cmnd: Introduce scsi_transfer_length helper
target: Report correct response length for some commands
target/sbc: Check that the LBA and number of blocks are correct in VERIFY
target/sbc: Remove sbc_check_valid_sectors()
Target/iscsi: Fix sendtargets response pdu for iser transport
Target/iser: Fix a wrong dereference in case discovery session is over iser
iscsi-target: Fix ABORT_TASK + connection reset iscsi_queue_req memory leak
target: Use complete_all for se_cmd->t_transport_stop_comp
target: Set CMD_T_ACTIVE bit for Task Management Requests
target: cleanup some boolean tests
target/spc: Simplify INQUIRY EVPD=0x80
tcm_fc: Generate TASK_SET_FULL status for response failures
tcm_fc: Generate TASK_SET_FULL status for DataIN failures
iscsi-target: Reject mutual authentication with reflected CHAP_C
iscsi-target: Remove no-op from iscsit_tpg_del_portal_group
iscsi-target: Fix CHAP_A parameter list handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull virtio updates from Rusty Russell:
"Main excitement is a virtio_scsi fix for alloc holding spinlock on the
abort path, which I refuse to CC stable since (1) I discovered it
myself, and (2) it's been there forever with no reports"
* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
virtio_scsi: don't call virtqueue_add_sgs(... GFP_NOIO) holding spinlock.
virtio-rng: fixes for device registration/unregistration
virtio-rng: fix boot with virtio-rng device
virtio-rng: support multiple virtio-rng devices
virtio_ccw: introduce device_lost in virtio_ccw_device
virtio: virtio_break_device() to mark all virtqueues broken.
|
|
This patch updates virtscsi_probe() to setup necessary Scsi_Host
level protection resources. (currently hardcoded to 1)
It changes virtscsi_add_cmd() to attach outgoing / incoming
protection SGLs preceeding the data payload, and is using the
new virtio_scsi_cmd_req_pi->pi_bytes[out,in] field to signal
to signal to vhost/scsi bytes to expect for protection data.
(Add missing #include <linux/blkdev.h> for blk_integrity - sfr + nab)
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagig@dev.mellanox.co.il>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
This triggers every time we do a SCSI abort:
virtscsi_tmf -> virtscsi_kick_cmd (grab lock and call) -> virtscsi_add_cmd
-> virtqueue_add_sgs (GFP_NOIO)
Logs look like this:
sd 0:0:0:0: [sda] abort
BUG: sleeping function called from invalid context at mm/slub.c:966
in_atomic(): 1, irqs_disabled(): 1, pid: 6, name: kworker/u2:0
3 locks held by kworker/u2:0/6:
#0: ("scsi_tmf_%d"shost->host_no){......}, at: [<c0153180>] process_one_work+0xe0/0x3d0
#1: ((&(&cmd->abort_work)->work)){......}, at: [<c0153180>] process_one_work+0xe0/0x3d0
#2: (&(&virtscsi_vq->vq_lock)->rlock){......}, at: [<c043f508>] virtscsi_kick_cmd+0x18/0x1b0
CPU: 0 PID: 6 Comm: kworker/u2:0 Not tainted 3.15.0-rc5+ #110
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-rc1-0-gb1d4dc9-20140515_140003-nilsson.home.kraxel.org 04/01/2014
Workqueue: scsi_tmf_0 scmd_eh_abort_handler
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Taken almost entirely from Nicholas Bellinger's scsi-mq conversion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
Access to tgt->req_vq is strictly serialized by spin_lock
of tgt->tgt_lock, so the ACCESS_ONCE() isn't necessary.
smp_read_barrier_depends() in virtscsi_req_done was introduced
to order reading req_vq and decreasing tgt->reqs, but it isn't
needed now because req_vq is read from
scsi->req_vqs[vq->index - VIRTIO_SCSI_VQ_BASE] instead of
tgt->req_vq, so remove the unnecessary barrier.
Also remove related comment about the barrier.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
virtscsi_init calls virtscsi_remove_vqs on err, even before initializing
the vqs. The latter calls virtscsi_set_affinity, so let's check the
pointer there before setting affinity on it.
This fixes a panic when setting device's num_queues=2 on RHEL 6.5:
qemu-system-x86_64 ... \
-device virtio-scsi-pci,id=scsi0,addr=0x13,...,num_queues=2 \
-drive file=/stor/vm/dummy.raw,id=drive-scsi-disk,... \
-device scsi-hd,drive=drive-scsi-disk,...
[ 0.354734] scsi0 : Virtio SCSI HBA
[ 0.379504] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[ 0.380141] IP: [<ffffffff814741ef>] __virtscsi_set_affinity+0x4f/0x120
[ 0.380141] PGD 0
[ 0.380141] Oops: 0000 [#1] SMP
[ 0.380141] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0+ #5
[ 0.380141] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007
[ 0.380141] task: ffff88003c9f0000 ti: ffff88003c9f8000 task.ti: ffff88003c9f8000
[ 0.380141] RIP: 0010:[<ffffffff814741ef>] [<ffffffff814741ef>] __virtscsi_set_affinity+0x4f/0x120
[ 0.380141] RSP: 0000:ffff88003c9f9c08 EFLAGS: 00010256
[ 0.380141] RAX: 0000000000000000 RBX: ffff88003c3a9d40 RCX: 0000000000001070
[ 0.380141] RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000000
[ 0.380141] RBP: ffff88003c9f9c28 R08: 00000000000136c0 R09: ffff88003c801c00
[ 0.380141] R10: ffffffff81475229 R11: 0000000000000008 R12: 0000000000000000
[ 0.380141] R13: ffffffff81cc7ca8 R14: ffff88003cac3d40 R15: ffff88003cac37a0
[ 0.380141] FS: 0000000000000000(0000) GS:ffff88003e400000(0000) knlGS:0000000000000000
[ 0.380141] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 0.380141] CR2: 0000000000000020 CR3: 0000000001c0e000 CR4: 00000000000006f0
[ 0.380141] Stack:
[ 0.380141] ffff88003c3a9d40 0000000000000000 ffff88003cac3d80 ffff88003cac3d40
[ 0.380141] ffff88003c9f9c48 ffffffff814742e8 ffff88003c26d000 ffff88003c26d000
[ 0.380141] ffff88003c9f9c68 ffffffff81474321 ffff88003c26d000 ffff88003c3a9d40
[ 0.380141] Call Trace:
[ 0.380141] [<ffffffff814742e8>] virtscsi_set_affinity+0x28/0x40
[ 0.380141] [<ffffffff81474321>] virtscsi_remove_vqs+0x21/0x50
[ 0.380141] [<ffffffff81475231>] virtscsi_init+0x91/0x240
[ 0.380141] [<ffffffff81365290>] ? vp_get+0x50/0x70
[ 0.380141] [<ffffffff81475544>] virtscsi_probe+0xf4/0x280
[ 0.380141] [<ffffffff81363ea5>] virtio_dev_probe+0xe5/0x140
[ 0.380141] [<ffffffff8144c669>] driver_probe_device+0x89/0x230
[ 0.380141] [<ffffffff8144c8ab>] __driver_attach+0x9b/0xa0
[ 0.380141] [<ffffffff8144c810>] ? driver_probe_device+0x230/0x230
[ 0.380141] [<ffffffff8144c810>] ? driver_probe_device+0x230/0x230
[ 0.380141] [<ffffffff8144ac1c>] bus_for_each_dev+0x8c/0xb0
[ 0.380141] [<ffffffff8144c499>] driver_attach+0x19/0x20
[ 0.380141] [<ffffffff8144bf28>] bus_add_driver+0x198/0x220
[ 0.380141] [<ffffffff8144ce9f>] driver_register+0x5f/0xf0
[ 0.380141] [<ffffffff81d27c91>] ? spi_transport_init+0x79/0x79
[ 0.380141] [<ffffffff8136403b>] register_virtio_driver+0x1b/0x30
[ 0.380141] [<ffffffff81d27d19>] init+0x88/0xd6
[ 0.380141] [<ffffffff81d27c18>] ? scsi_init_procfs+0x5b/0x5b
[ 0.380141] [<ffffffff81ce88a7>] do_one_initcall+0x7f/0x10a
[ 0.380141] [<ffffffff81ce8aa7>] kernel_init_freeable+0x14a/0x1de
[ 0.380141] [<ffffffff81ce8b3b>] ? kernel_init_freeable+0x1de/0x1de
[ 0.380141] [<ffffffff817dec20>] ? rest_init+0x80/0x80
[ 0.380141] [<ffffffff817dec29>] kernel_init+0x9/0xf0
[ 0.380141] [<ffffffff817e68fc>] ret_from_fork+0x7c/0xb0
[ 0.380141] [<ffffffff817dec20>] ? rest_init+0x80/0x80
[ 0.380141] RIP [<ffffffff814741ef>] __virtscsi_set_affinity+0x4f/0x120
[ 0.380141] RSP <ffff88003c9f9c08>
[ 0.380141] CR2: 0000000000000020
[ 0.380141] ---[ end trace 8074b70c3d5e1d73 ]---
[ 0.475018] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
[ 0.475018]
[ 0.475068] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff)
[ 0.475068] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
[jejb: checkpatch fixes]
Signed-off-by: Fam Zheng <famz@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
vqs are freed in virtscsi_freeze but the hotcpu_notifier is not
unregistered. We will have a use-after-free usage when the notifier
callback is called after virtscsi_freeze.
Fixes: 285e71ea6f3583a85e27cb2b9a7d8c35d4c0d558
("virtio-scsi: reset virtqueue affinity when doing cpu hotplug")
Cc: stable@vger.kernel.org
Signed-off-by: Asias He <asias.hejun@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
If virtqueue_get_buf() returned with a NULL pointer avoid a possibly
endless loop by checking for a broken virtqueue.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
This lets the transport do endian conversion if necessary, and insulates
the drivers from the difference.
Most drivers can use the simple helpers virtio_cread() and virtio_cwrite().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
The freeze and restore functions defined in virtio drivers are used
for suspend and hibernate, so CONFIG_PM_SLEEP is more appropriate than
CONFIG_PM. This patch replace all CONFIG_PM with CONFIG_PM_SLEEP for
virtio drivers that implement freeze and restore callbacks.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
vscsi->num_queues counts the number of request virtqueue which does not
include the control and event virtqueue. It is wrong to subtract
VIRTIO_SCSI_VQ_BASE from vscsi->num_queues.
This patch fixes the following panic.
(qemu) device_del scsi0
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
IP: [<ffffffff8179b29f>] __virtscsi_set_affinity+0x6f/0x120
PGD 0
Oops: 0000 [#1] SMP
Modules linked in:
CPU: 0 PID: 659 Comm: kworker/0:1 Not tainted 3.11.0-rc2+ #1172
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: kacpi_hotplug _handle_hotplug_event_func
task: ffff88007bee1cc0 ti: ffff88007bfe4000 task.ti: ffff88007bfe4000
RIP: 0010:[<ffffffff8179b29f>] [<ffffffff8179b29f>] __virtscsi_set_affinity+0x6f/0x120
RSP: 0018:ffff88007bfe5a38 EFLAGS: 00010202
RAX: 0000000000000010 RBX: ffff880077fd0d28 RCX: 0000000000000050
RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000000
RBP: ffff88007bfe5a58 R08: ffff880077f6ff00 R09: 0000000000000001
R10: ffffffff8143e673 R11: 0000000000000001 R12: 0000000000000001
R13: ffff880077fd0800 R14: 0000000000000000 R15: ffff88007bf489b0
FS: 0000000000000000(0000) GS:ffff88007ea00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000020 CR3: 0000000079f8b000 CR4: 00000000000006f0
Stack:
ffff880077fd0d28 0000000000000000 ffff880077fd0800 0000000000000008
ffff88007bfe5a78 ffffffff8179b37d ffff88007bccc800 ffff88007bccc800
ffff88007bfe5a98 ffffffff8179b3b6 ffff88007bccc800 ffff880077fd0d28
Call Trace:
[<ffffffff8179b37d>] virtscsi_set_affinity+0x2d/0x40
[<ffffffff8179b3b6>] virtscsi_remove_vqs+0x26/0x50
[<ffffffff8179c7d2>] virtscsi_remove+0x82/0xa0
[<ffffffff814cb6b2>] virtio_dev_remove+0x22/0x70
[<ffffffff8167ca49>] __device_release_driver+0x69/0xd0
[<ffffffff8167cb9d>] device_release_driver+0x2d/0x40
[<ffffffff8167bb96>] bus_remove_device+0x116/0x150
[<ffffffff81679936>] device_del+0x126/0x1e0
[<ffffffff81679a06>] device_unregister+0x16/0x30
[<ffffffff814cb889>] unregister_virtio_device+0x19/0x30
[<ffffffff814cdad6>] virtio_pci_remove+0x36/0x80
[<ffffffff81464ae7>] pci_device_remove+0x37/0x70
[<ffffffff8167ca49>] __device_release_driver+0x69/0xd0
[<ffffffff8167cb9d>] device_release_driver+0x2d/0x40
[<ffffffff8167bb96>] bus_remove_device+0x116/0x150
[<ffffffff81679936>] device_del+0x126/0x1e0
[<ffffffff8145edfc>] pci_stop_bus_device+0x9c/0xb0
[<ffffffff8145f036>] pci_stop_and_remove_bus_device+0x16/0x30
[<ffffffff81474a9e>] acpiphp_disable_slot+0x8e/0x150
[<ffffffff81474f6a>] hotplug_event_func+0xba/0x1a0
[<ffffffff814906c8>] ? acpi_os_release_object+0xe/0x12
[<ffffffff81475911>] _handle_hotplug_event_func+0x31/0x70
[<ffffffff810b5333>] process_one_work+0x183/0x500
[<ffffffff810b66e2>] worker_thread+0x122/0x400
[<ffffffff810b65c0>] ? manage_workers+0x2d0/0x2d0
[<ffffffff810bc5de>] kthread+0xce/0xe0
[<ffffffff810bc510>] ? kthread_freezable_should_stop+0x70/0x70
[<ffffffff81ca045c>] ret_from_fork+0x7c/0xb0
[<ffffffff810bc510>] ? kthread_freezable_should_stop+0x70/0x70
Code: 01 00 00 00 74 59 45 31 e4 83 bb c8 01 00 00 02 74 46 66 2e 0f 1f 84 00 00 00 00 00 49 63 c4 48 c1 e0 04 48 8b bc 0
3 10 02 00 00 <48> 8b 47 20 48 8b 80 d0 01 00 00 48 8b 40 50 48 85 c0 74 07 be
RIP [<ffffffff8179b29f>] __virtscsi_set_affinity+0x6f/0x120
RSP <ffff88007bfe5a38>
CR2: 0000000000000020
---[ end trace 99679331a3775f48 ]---
CC: stable@vger.kernel.org
Signed-off-by: Asias He <asias@redhat.com>
Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Add hot cpu notifier to reset the request virtqueue affinity
when doing cpu hotplug.
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: Asias He <asias@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
This patch adds queue steering to virtio-scsi. When a target is sent
multiple requests, we always drive them to the same queue so that FIFO
processing order is kept. However, if a target was idle, we can choose
a queue arbitrarily. In this case the queue is chosen according to the
current VCPU, so the driver expects the number of request queues to be
equal to the number of VCPUs. This makes it easy and fast to select
the queue, and also lets the driver optimize the IRQ affinity for the
virtqueues (each virtqueue's affinity is set to the CPU that "owns"
the queue).
The speedup comes from improving cache locality and giving CPU affinity
to the virtqueues, which is why this scheme was selected. Assuming that
the thread that is sending requests to the device is I/O-bound, it is
likely to be sleeping at the time the ISR is executed, and thus executing
the ISR on the same processor that sent the requests is cheap.
However, the kernel will not execute the ISR on the "best" processor
unless you explicitly set the affinity. This is because in practice
you will have many such I/O-bound processes and thus many otherwise
idle processors. Then the kernel will execute the ISR on a random
processor, rather than the one that is sending requests to the device.
The alternative to per-CPU virtqueues is per-target virtqueues. To
achieve the same locality, we could dynamically choose the virtqueue's
affinity based on the CPU of the last task that sent a request. This
is less appealing because we do not set the affinity directly---we only
provide a hint to the irqbalanced running in userspace. Dynamically
changing the affinity only works if the userspace applies the hint
fast enough.
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: Asias He <asias@redhat.com>
Tested-by: Venkatesh Srinivas <venkateshs@google.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Avoid duplicated code in all of the callers.
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: Asias He <asias@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
This will be needed soon in order to retrieve the per-target
struct.
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: Asias He <asias@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
virtio_scsi_target_state is now empty. We will find new uses for it in
the next few patches, so this patch does not drop it completely.
And as James suggested, we use entries target_alloc and target_destroy
in the host template to allocate and destroy the virtio_scsi_target_state
of each target, attach this struct to scsi_target->hostdata. Now
we can get at it from the sdev with scsi_target(sdev)->hostdata.
No messing around with fixed size arrays and bulk memory allocation
and no need to pass in the maximum target size as a parameter because
everything should now happen dynamically.
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: Asias He <asias@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
It's a bit clearer, and add_buf is going away.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Asias He <asias@redhat.com>
|
|
Using the new virtqueue_add_sgs function lets us simplify the queueing
path. In particular, all data protected by the tgt_lock is just gone
(multiqueue will find a new use for the lock).
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Asias He <asias@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Convert the virtio-scsi driver to use pr_err() instead of printk().
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Adam Radford <linuxraid@lsi.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
