summaryrefslogtreecommitdiff
path: root/drivers/scsi/ufs
AgeCommit message (Collapse)Author
2020-03-31scsi: ufs: set device as active power mode after resetting deviceStanley Chu
Currently ufshcd driver assumes that bInitPowerMode parameter is not changed by any vendors thus device power mode can be set as "Active" during initialization. According to UFS JEDEC specification, device power mode shall be "Active" after HW Reset is triggered if the bInitPowerMode parameter in Device Descriptor is default value. By above description, we can set device power mode as "Active" after device reset is triggered by vendor's callback. With this change, the link startup performance can be improved in some cases by not setting link_startup_again as true in ufshcd_link_startup(). Link: https://lore.kernel.org/r/20200327095835.10293-1-stanley.chu@mediatek.com Reviewed-by: Can Guo <cang@codeaurora.org> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: ufs-mediatek: add error recovery for suspend and resumeStanley Chu
Once fail happens during suspend and resume flow if the desired low power link state is H8, link recovery is required for MediaTek UFS controller. For resume flow, since power and clocks are already enabled before invoking vendor's resume callback, simply using ufshcd_link_recovery() inside callback is fine. For suspend flow, the device power enters low power mode or is disabled before suspend callback, thus ufshcd_link_recovery() can not be directly used in vendor callback. One solution is to set the link to off state and then ufshcd_host_reset_and_restore() will be executed by ufshcd_suspend(). Link: https://lore.kernel.org/r/20200327095329.10083-3-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: ufs: export ufshcd_link_recoveryStanley Chu
Export ufshcd_link_recovery to allow vendors to recover failed link in vendor's callbacks. Link: https://lore.kernel.org/r/20200327095329.10083-2-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: ufs: Clean up ufshcd_scale_clks() and clock scaling error out pathSubhash Jadavani
This change introduces a func ufshcd_set_clk_freq() to explicitly set clock frequency so that it can be used in reset_and_restore path and in ufshcd_scale_clks(). This change also cleans up the clock scaling error out path. [mkp: commit desc] Link: https://lore.kernel.org/r/1585214742-5466-2-git-send-email-cang@codeaurora.org Fixes: a3cd5ec55f6c ("scsi: ufs: add load based scaling of UFS gear") Reviewed-by: Bean Huo <beanhuo@micron.com> Acked-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs: Do not rely on prefetched dataCan Guo
We were setting bActiveICCLevel attribute for UFS device only once but the type of this attribute has changed from persistent to volatile since UFS device specification v2.1. This attribute is set to the default value after power cycle or hardware reset event. It isn't safe to rely on prefetched data (only used for bActiveICCLevel attribute now). Hence this change removes the code related to data prefetching and set this parameter on every attempt to probe the UFS device. Tested-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs: Enable block layer runtime PM for well-known logical unitsCan Guo
Block layer RPM is enabled for the genernal UFS SCSI devices when they are probed by their driver. However block layer RPM is not enabled for UFS well-known SCSI devices. As UFS SCSI devices have their corresponding BSG char devices, accessing a BSG char device via IOCTL may send requests to its corresponding SCSI device through its request queue. If BSG IOCTL sends a request to a well-known SCSI device when HBA is not runtime active, due to block layer RPM not being enabled for the well-known SCSI devices, the HBA, which is at the top of a SCSI device's parent chain, will not be resumed. This change enables block layer RPM for the well-known SCSI devices so that block layer can handle RPM for the well-known SCSI devices just like for the general SCSI devices. Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs-qcom: Override devfreq parametersAsutosh Das
Override devfreq parameters for power-performance trade-off. Link: https://lore.kernel.org/r/b6875729b6072134985c9113a820cf60a2af22e7.1585160616.git.asutoshd@codeaurora.org Acked-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufshcd: Let vendor override devfreq parametersAsutosh Das
Vendor drivers may have a need to update the polling interval and thresholds. Provide a vops for vendor drivers to use. Link: https://lore.kernel.org/r/acd79e00396cff855256adad47f615ccdbde85ac.1585160616.git.asutoshd@codeaurora.org Acked-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufshcd: Update the set frequency to devfreqAsutosh Das
Currently, the frequency that devfreq provides the driver always leads the clocks to be scaled up. Hence, round the clock-rate to the nearest frequency before deciding to scale. Also update the devfreq statistics of current frequency. Link: https://lore.kernel.org/r/d0c6c22455811e9f0eda01f9bc70d1398b51b2bd.1585160616.git.asutoshd@codeaurora.org Acked-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs: Resume ufs host before accessing ufs deviceNitin Rawat
As a part of sysfs reading of descriptors/attributes/flags, query commands should only be executed when hba's power runtime status is active. To guarantee this, add pm_runtime_get/put_sync() to those paths where query commands are sent. Link: https://lore.kernel.org/r/f712a4f7bdb0ae32e0d83634731e7aaa1b3a6cdd.1585009663.git.asutoshd@codeaurora.org Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Nitin Rawat <nitirawa@codeaurora.org> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs-mediatek: customize the delay for enabling hostStanley Chu
MediaTek platform and UFS controller can dynamically customize the delay for host enabling according to different scenarios. For example, if UniPro enters lower-power mode, such delay can be minimized, otherwise longer delay shall be expected. Link: https://lore.kernel.org/r/20200318104016.28049-8-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs: make HCE polling more compact to improve initialization latencyStanley Chu
Reduce the waiting period between each HCE (Host Controller Enable) polling from 5 ms to 1 ms. Also increase the maximum polling times to make "total polling time" roughly the same. This change could make HCE initialization faster to improve latency of ufshcd initialization, error recovery, and resume behaviors. Link: https://lore.kernel.org/r/20200318104016.28049-7-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs: allow custom delay prior to host enablingStanley Chu
Currently a 1 ms delay is applied before polling CONTROLLER_ENABLE bit. This delay may not be required or can be changed in different controllers. Make the delay as a changeable value in struct ufs_hba to allow it customized by vendors. Link: https://lore.kernel.org/r/20200318104016.28049-6-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs-mediatek: use common delay functionStanley Chu
A common delay function is introduced in UFS core driver, thus ufs-mediatek can use it instead of the private delay function. Link: https://lore.kernel.org/r/20200318104016.28049-5-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs: introduce common and flexible delay functionStanley Chu
Introduce a common delay function to provide flexible way for users to take choices of udelay and usleep_range into consideration according to the required delay time. Link: https://lore.kernel.org/r/20200318104016.28049-4-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs: use an enum for host capabilitiesStanley Chu
Use an enum to specify the host capabilities instead of #defines inside the structure definition. Link: https://lore.kernel.org/r/20200318104016.28049-3-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Can Guo <cang@codeaurora.org> Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc()Stanley Chu
In ufshcd_disable_tx_lcc(), if ufshcd_dme_get() or ufshcd_dme_peer_get() get fail, uninitialized variable "tx_lanes" may be used as unexpected lane ID for DME configuration. Fix this issue by initializing "tx_lanes". Link: https://lore.kernel.org/r/20200318104016.28049-2-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Can Guo <cang@codeaurora.org> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-11scsi: docs: convert ufs.txt to ReSTMauro Carvalho Chehab
Link: https://lore.kernel.org/r/052d45576e342a217185e91a83793b384b1592a4.1583136624.git.mchehab+huawei@kernel.org Acked-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-11scsi: ufs-mediatek: fix HOST_PA_TACTIVATE quirk for Samsung UFS DevicesStanley Chu
Device quirk "UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE" is enabled for all Samsung devices by default currently. However MediaTek UFS host requires different host PA_TACTIVATE configuration. Hence clear this quirk first and then apply vendor-specific value in vops callback. Link: https://lore.kernel.org/r/20200302135346.16797-1-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: ufs: Simplify two testsBart Van Assche
lrbp->cmd is set only for SCSI commands. Use this knowledge to simplify two boolean expressions. Link: https://lore.kernel.org/r/20200123035637.21848-4-bvanassche@acm.org Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: ufs: Introduce ufshcd_init_lrb()Bart Van Assche
This patch does not change any functionality but makes the next patch in this series easier to read. Link: https://lore.kernel.org/r/20200123035637.21848-3-bvanassche@acm.org Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: ufs: ufs-mediatek: add waiting time for reference clockStanley Chu
Some delays may be required either after gating or before ungating reference clock for device according to vendor requirements. Note that in UFS 3.0, the delay time after gating reference clock can be defined by attribute bRefClkGatingWaitTime. Use the formal value instead if it can be queried from device. Link: https://lore.kernel.org/r/20200220134848.8807-2-stanley.chu@mediatek.com Reviewed-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: ufs-qcom: Apply QUIRK_HOST_TACTIVATE for WDC UFS devicesCan Guo
Western Digital UFS devices require host's PA_TACTIVATE to be lower than device's PA_TACTIVATE, otherwise it may get stuck during hibern8 sequence. Link: https://lore.kernel.org/r/1582517363-11536-3-git-send-email-cang@codeaurora.org Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Acked-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: ufs: Allow vendor device quirks to be applied earlyCan Guo
Currently ufshcd_vops_apply_dev_quirks() comes after all UniPro parameters have been tuned. Move it up so that vendors have a chance to apply device quirks in advance. Link: https://lore.kernel.org/r/1582517363-11536-2-git-send-email-cang@codeaurora.org Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: ufshcd: use an enum for quirksChristoph Hellwig
Use an enum to specify the various quirks instead of #defines inside the structure definition. [mkp: fix typo] Link: https://lore.kernel.org/r/20200221140812.476338-3-hch@lst.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: ufshcd: remove unused quirksChristoph Hellwig
Remove various quirks that don't have users, as well as the dead code keyed off them. Link: https://lore.kernel.org/r/20200221140812.476338-2-hch@lst.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-12scsi: ufs-qcom: Delay specific time before gate ref clkCan Guo
After enter hibern8, as UFS JEDEC ver 3.0 requires, a specific gating wait time is required before disable the device reference clock. If it is not specified, use the old delay. Link: https://lore.kernel.org/r/1581392451-28743-8-git-send-email-cang@codeaurora.org Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Hongwu Su <hongwus@codeaurora.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-12scsi: ufs: Add dev ref clock gating wait time supportCan Guo
In UFS version 3.0, a newly added attribute bRefClkGatingWaitTime defines the minimum time for which the reference clock is required by device during transition to LS-MODE or HIBERN8 state. Make this change to reflect the new requirement by adding delays before turning off the clock. Link: https://lore.kernel.org/r/1581392451-28743-7-git-send-email-cang@codeaurora.org Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-12scsi: ufs: Fix ufshcd_hold() caused scheduling while atomicCan Guo
The async version of ufshcd_hold(async == true), which is only called in queuecommand path as for now, is expected to work in atomic context, thus it should not sleep or schedule out. When it runs into the condition that clocks are ON but link is still in hibern8 state, it should bail out without flushing the clock ungate work. Fixes: f2a785ac2312 ("scsi: ufshcd: Fix race between clk scaling and ungate work") Link: https://lore.kernel.org/r/1581392451-28743-6-git-send-email-cang@codeaurora.org Reviewed-by: Hongwu Su <hongwus@codeaurora.org> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-12scsi: ufs: Remove the check before call setup clock notify vopsCan Guo
The functionality of vendor specific ops should be handled properly in platform specific driver, but should not count on the UFS driver. Link: https://lore.kernel.org/r/1581392451-28743-5-git-send-email-cang@codeaurora.org Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-12scsi: ufs-qcom: Adjust bus bandwidth voting and unvotingCan Guo
The bus bandwidth voting is required to be done before the bus clocks are enabled, and the unvoting is required to be done only after the bus clocks are disabled. Link: https://lore.kernel.org/r/1581392451-28743-4-git-send-email-cang@codeaurora.org Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Hongwu Su <hongwus@codeaurora.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-12scsi: ufs: set load before setting voltage in regulatorsAsutosh Das
This sequence change is required to avoid dips in voltage during boot-up. Apparently, this dip is caused because in the original sequence, the regulators are initialized in lpm mode. And then when the load is set to high, and more current is drawn, than is allowed in lpm, the dip is seen. Link: https://lore.kernel.org/r/1581392451-28743-3-git-send-email-cang@codeaurora.org Reviewed-by: Hongwu Su <hongwus@codeaurora.org> Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-12scsi: ufs: Flush exception event before suspendSayali Lokhande
Exception event can be raised by the device when system suspend is in progress. This will result in unclocked register access in exception event handler as clocks will be turned off during suspend. This change makes sure to flush exception event handler work in suspend before disabling clocks to avoid unclocked register access issue. Link: https://lore.kernel.org/r/1581392451-28743-2-git-send-email-cang@codeaurora.org Reviewed-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-12scsi: ufs: Select INITIAL ADAPT type for HS Gear4Can Guo
ADAPT is added specifically for HS Gear4 mode only. Select INITIAL ADAPT before power mode change to G4 and select NO ADAPT before switch to non-G4 modes. [mkp: fixed typo in header file] Link: https://lore.kernel.org/r/1581485910-8307-3-git-send-email-cang@codeaurora.org Signed-off-by: Can Guo <cang@codeaurora.org> Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-12scsi: ufs: introduce common function to disable host TX LCCStanley Chu
Many vendors would like to disable host TX LCC during initialization flow. Introduce a common function for all users to make drivers easier to read and maintained. This patch does not change any functionality. Link: https://lore.kernel.org/r/20200207070357.17169-3-stanley.chu@mediatek.com Reviewed-by: Can Guo <cang@codeaurora.org> Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-12scsi: ufs: ufs-mediatek: fix TX LCC disabling timingStanley Chu
MediaTek UFS host requires TX LCC to be disabled on both host and device sides. This can be done by disabling host's local TX LCC before link startup. Correct TX LCC disabling timing in MediaTek UFS driver. Link: https://lore.kernel.org/r/20200207070357.17169-2-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-10scsi: ufs: ufs-mediatek: gate ref-clk during Auto-Hibern8Stanley Chu
In current UFS driver design, hba->uic_link_state will not be changed after link enters Hibern8 state by Auto-Hibern8 mechanism. In this case, reference clock gating will be skipped unless special handling is implemented in vendor's callbacks. Support reference clock gating during Auto-Hibern8 period in MediaTek Chipsets: If link state is already in Hibern8 while Auto-Hibern8 feature is enabled, gate reference clock in setup_clocks callback. Link: https://lore.kernel.org/r/20200129105251.12466-5-stanley.chu@mediatek.com Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-10scsi: ufs: fix Auto-Hibern8 error detectionStanley Chu
Auto-Hibern8 may be disabled by some vendors or sysfs in runtime even if Auto-Hibern8 capability is supported by host. If Auto-Hibern8 capability is supported by host but not actually enabled, Auto-Hibern8 error shall not happen. To fix this, provide a way to detect if Auto-Hibern8 is actually enabled first, and bypass Auto-Hibern8 disabling case in ufshcd_is_auto_hibern8_error(). Fixes: 821744403913 ("scsi: ufs: Add error-handling of Auto-Hibernate") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200129105251.12466-4-stanley.chu@mediatek.com Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-10scsi: ufs: ufs-mediatek: support linkoff state during suspendStanley Chu
If system suspend or runtime suspend mode is configured as linkoff state, phy can be powered off and reference clock can be gated in MediaTek Chipsets. At the same time, remove redundant reference clock control in suspend and resume callbacks because such control can be well-handled in setup_clocks callback. Link: https://lore.kernel.org/r/20200129105251.12466-3-stanley.chu@mediatek.com Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-10scsi: ufs: ufs-mediatek: ensure UniPro is not powered down before linkupStanley Chu
MediaTek Chipsets can enter proprietary UniPro low-power mode during suspend while link is in hibern8 state. Make sure leaving low-power mode before every link startup to prevent lockup in any possible error recovery path. At the same time, re-factor related funcitons to improve code readability. Link: https://lore.kernel.org/r/20200129105251.12466-2-stanley.chu@mediatek.com Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-30scsi: ufs: fix spelling mistake "initilized" -> "initialized"Colin Ian King
There is a spelling mistake in a pr_err message. Fix it. Link: https://lore.kernel.org/r/20200122091250.2777221-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: ufs: Use UFS device indicated maximum LU numberBean Huo
According to Jedec standard UFS 3.0 and UFS 2.1 Spec, Maximum number of logical units supported by the UFS device is indicated by parameter bMaxNumberLU in Geometry Descriptor. This patch is to delete current hard code macro definition of UFS_UPIU_MAX_GENERAL_LUN, and switch to use device indicated number instead. Link: https://lore.kernel.org/r/20200120130820.1737-9-huobean@gmail.com Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: ufs: Add max_lu_supported in struct ufs_dev_infoBean Huo
Add one new parameter max_lu_supported in struct ufs_dev_info, which will be used to express exactly how many general LUs being supported by UFS device, and initialize it during booting stage. This patch also adds a new function ufshcd_device_geo_params_init() for initialization of UFS device geometry descriptor related parameters. Link: https://lore.kernel.org/r/20200120130820.1737-8-huobean@gmail.com Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: ufs: Delete is_init_prefetch from struct ufs_hbaBean Huo
Without variable is_init_prefetch, the current logic can guarantee ufshcd_init_icc_levels() will execute only once, delete it now. Link: https://lore.kernel.org/r/20200120130820.1737-7-huobean@gmail.com Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: ufs: Inline two functions into their callersBean Huo
Delete ufshcd_read_power_desc() and ufshcd_read_device_desc(), directly inline ufshcd_read_desc() into its callers. Link: https://lore.kernel.org/r/20200120130820.1737-6-huobean@gmail.com Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: ufs: Move ufshcd_get_max_pwr_mode() to ufshcd_device_params_init()Bean Huo
ufshcd_get_max_pwr_mode() only need to be called once while booting, take it out from ufshcd_probe_hba() and inline into ufshcd_device_params_init(). Link: https://lore.kernel.org/r/20200120130820.1737-5-huobean@gmail.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: ufs: Split ufshcd_probe_hba() based on its called flowBean Huo
This patch has two major non-functionality changes: 1. Take scanning host if-statement out from ufshcd_probe_hba(), and move into a new added function ufshcd_add_lus(). In this new function ufshcd_add_lus(), the main functionalitis include: ICC initialization, add well-known LUs, devfreq initialization, UFS bsg probe and scsi host scan. The reason for this change is that these functionalities only being called during booting stage flow ufshcd_init()->ufshcd_async_scan(). In the processes of error handling and power management ufshcd_suspend(), ufshcd_resume(), ufshcd_probe_hba() being called, but these functionalitis above metioned are not hit. 2. Move context of initialization of parameters associated with the UFS device to a new added function ufshcd_device_params_init(). The reason of this change is that all of these parameters are used by driver, but only need to be initialized once when booting. Combine them into an integral function, make them easier maintain. Link: https://lore.kernel.org/r/20200120130820.1737-4-huobean@gmail.com Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: ufs: Delete struct ufs_dev_descBean Huo
In consideration of UFS host driver uses parameters of struct ufs_dev_desc, move its parameters to struct ufs_dev_info, delete struct ufs_dev_desc. Link: https://lore.kernel.org/r/20200120130820.1737-3-huobean@gmail.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: ufs: Fix ufshcd_probe_hba() reture value in case ↵Bean Huo
ufshcd_scsi_add_wlus() fails A non-zero error value likely being returned by ufshcd_scsi_add_wlus() in case of failure of adding the WLs, but ufshcd_probe_hba() doesn't use this value, and doesn't report this failure to upper caller. This patch is to fix this issue. Fixes: 2a8fa600445c ("ufs: manually add well known logical units") Link: https://lore.kernel.org/r/20200120130820.1737-2-huobean@gmail.com Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: ufs-mediatek: enable low-power mode for hibern8 stateStanley Chu
In MediaTek Chipsets, UniPro link and ufshci can enter proprietary low-power mode while link is in hibern8 state. Link: https://lore.kernel.org/r/20200117035108.19699-4-stanley.chu@mediatek.com Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-14 23:37:01 +0000